Touchpoint 4 The Touchpoint 4 controller provides protection of personnel and plant from flammable, toxic and oxygen gas hazards Touchpoint 4 controller User Friendly • • • • Self-contained, wall mounted enclosure Ultra-clear backlit display Intuitive, icon driven, menu system Simple push button operation Easy to Install • • • • Unobtrusive slimline profile Mounting bracket included Easy access to all terminals Pre-formed knockouts for cable entry Flexible Operation • Fully user programmable for scale, units and calibration • Fully configurable relays • Compatible with all Zareba gas detectors Common Module • • • • • • • System status indication Built-in audiovisual alarms AC and/or DC power distribution Common gas and fault alarm relays Dedicated drive for up to three remote audible and visual alarms Input for remote reset push button RS485 interface Input Modules • • • • • • Accepts up to four channels mA and mV inputs for wide range of gas detectors Individual channel display Gas, range, reading and alarm status Two user programmable alarm relays Isolated 4-20mA output The Touchpoint 4 controller provides protection of personnel and plant from flammable, toxic and oxygen gas hazards when used with up to four Sensepoint gas detectors. Self-contained, fully user configurable and wall mounted, a Touchpoint 4 gas detection system can monitor gas hazards in a large area or several discrete locations from a convenient central site. Touchpoint 4 may be driven from AC and/or DC supplies and comprises a common display module with up to four individual channel modules. It is suitable for stand-alone operation or as part of a larger distributed control system via an integral RS485 interface. The common module, with backlit display, details the overall system status and includes common alarm relays, remote reset push button input and dedicated drives for up to three field mounted audible and visual alarms. A panel mounted audible and visual alarm is also included. Input modules are available for use with 4-20mA and mV type gas detectors. Each channel includes a backlit display detailing gas type, measuring range, actual gas reading in both numeric and bar graph format as well as alarm status. Two user programmable alarm relays and a repeated 4-20mA signal proportional to the gas level monitored are included per channel. The system is fully user programmable via the ultra-clear backlit displays and intuitive menu system. For example, relays may be configured as ‘non-latching’ (default is ‘latching’) so that outputs clear automatically on remote unmanned sites. Buttons used for configuration are hidden behind access panels to prevent tampering. A single button is available to all users on the front of the modules to perform a simple self-test or to reset alarms when needed. The shallow profile is designed for easy location in corridors or reception areas where some larger controllers may be obtrusive. A wall mounting bracket is included to which the controller is attached to simplify installation. All cable entries are made using pre-formed knockouts at the bottom of the enclosure. The hinged front cover latches open to enable full and unhindered access to the terminal compartment for installers. Event history is recorded as standard on all Touchpoint systems. Times and dates of alarms and power interruptions can be reviewed via the display to provide useful diagnostic information for service engineers and plant operators. The Touchpoint 4 gas detection system provides comprehensive control of all your gas detection needs. Installation details Touchpoint4 is designed for use in safe areas. Electrical installation should follow national guidelines using suitably approved cable and glands (M20 or 3/4"NPT) or conduit (3/4"NPT). Screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable should be used where appropriate to minimize unwanted effects from RF sources. Mechanical General Description The Touchpoint 4 controller is designed to offer easy and convenient installation. The wall mounting bracket provided serves as a drilling template and enables the controller to be mounted without assistance. The hinged front cover may be latched open to ensure free and unhindered access to the large terminal compartment. The pre-formed knockouts in the base offer both M20 and 3/4"NPT fittings enabling cable glands or conduit to be used during installation. Dedicated audible/visual alarm drives are powered by the system thereby removing any need for secondary supplies. Mounting Bracket Dimensions 88.0mm / 3.5" 395.0mm / 15.6" 268.0mm / 10.6" 86.0mm / 3.4" 172.0mm / 6.8" 228.0mm / 9.0" 198.0mm / 7.8" 338.0mm / 13.3" Installation details Common Module Display Terminal Layout Connections 1 2 3 4 5 6 7 8 9 10 11 12 (L)ive (N)eutral (E)arth NO C NC NO C NC NO C NC 13 DC + 23 DC 14 15 16 17 18 19 20 21 22 D+ DR1 R2 S1 S1 S3 VIS +24VDC Dedicated Audible/Visual Alarm Drive AC Supply 85-265Vac, 50/60 Hz 160Wac Maximum Alarm Relay 1 Alarm Relay 2 Fault Relay DC Supply 19-32VDC 63 Wac Maximum RS485 Link Remote Reset Dedicated Audible/Visual Alarm Drive Typical Audible& & Visual Alarms Typical Audible Visual Alarms Installation details Channel Module (mV or mA) Display Sensepoint - Flammable (mV) Sensepoint - Toxic & Oxygen (mA) Terminal Layout & Connections Sensepoint Plus & Pro – All Versions (mA) Refer to detector datasheets for full specification of field devices Technical summary General Specification Use Wall mounted 1 to 4 channel control panel for the local annunciation of gas hazards as detected by the Sensepoint range of gas detectors. Suitable for use as an indoor stand-alone, self-contained installation or as part of a larger distributed control system. Common Operation of Modules Operation Single ‘Test/Accept/Reset’ push button for normal use. Three further hidden push buttons per module for configuration via intuitive menu system. Backlit display System and channel status including gas type, measuring range, units of measure, digital gas reading, bar graph display 0-100%FSD, system status indicators including alarm set point, alarm activated and power health. Other indication Ultra-bright LEDs: Alarm (red), power (green), fault (amber) Audible alarm 85dBA at 1m / 90dBA at 1 foot, user hush facility, re-activated on next event Termination Accessed via hinged front cover (latch to hold open as required). All cable/conduit entry via pre-formed knockouts at bottom of controller. Screw terminals suitable for 0.5mm2 (20AWG) to 2.5mm2 (14AWG). Crimped connection recommended. Environmental IP rating Indoor use, IP 44 in accordance with EN60529:1992 Weight 6kg (13.2lbs) Operational Temperature -10°C to +40°C / 14°F to 104°F Humidity 10 to 90%RH (non condensing) Pressure 90-110kPa Storage -40°C to +80°C / -40°F to +176°F, 20 to 80%RH (non condensing) Common Module Supply85-265Vac, 50/60Hz auto-sensing 19-32Vdc Maximum power 160 Wac and/or 63Wdc Communications RS485, user configurable address and baud rate (1200, 2400, 4800, 9600, 19200) OtherRemote accept/reset push button, normally open, momentary close to activate Relays Common Alarm 1 (A1) Common Alarm 2 (A2) System Fault (F) Rating SPCO / 3A, 240VAC (non inductive load) SPCO / 3A, 240VAC (non inductive load) SPCO / 3A, 240VAC (non inductive load) Default Setting Latching Normally de-energized Energize on any A1 alarm Latching Normally de-energized Energize on any A2 alarm Latching Normally energized De-energize on fault/power loss User configurable options Latching/non-latching Energized/de-energized Latching/non-latching Energized/de-energized Latching/non-latching Energized/de-energized Channel Module Number of Inputs Up to four channel modules may be fitted to any system. mV and mA types available Input modules are suitable for the following types of detector Detector Type3 wire mV bridge 2 wire, 4-20mA, loop powered 3 wire, 4-20mA, source output Example Sensepoint Flammable Sensepoint Toxic and Oxygen Sensepoint Plus or Sensepoint Pro Detector Supply mV Bridge Input Module mA Input Module Constant current supply: 200mA Maximum detector current supply: 500mA Self regulating supply voltage Minimum guaranteed supply voltage from the controller: 18Vdc subject to cable resistance Input impedance: 100 Ohms Maximum loop resistance: 18 Ohms Relays Alarm 1 (A1) Alarm 2 (A2) Rating SPCO / 3A, 240VAC (non inductive load) SPCO / 3A, 240VAC (non inductive load) Default setting Latching, Normally de-energized Energize on alarm, Factory setting 20%FSD Latching, Normally de-energized Energize on alarm, Factory setting 40%FSD User configurable options Latching/non-latching, Energized/de-energized Rising/falling (Oxygen), Trip point 10-90%FSD Latching/non-latching, Energized/de-energized Rising/falling (Oxygen), Trip point 10-90%FSD Other Isolated 4-20mA output proportional 0-100%FSD Ordering information Ordering Information NO. CHANNELS FITTED mV INPUTS 4, 3, 2, 1 4, 3, 2, 1, 0 e.g. TPWM 4 3 2 1 = TPWM4321 MAX NO. OF CHANNELS 4-20mA INPUTS 4, 1 4, 3, 2, 1, 0 For reference only Detector Input Module Required Wires Sensepoint Flammable Toxic mV mA 3 2 Sensepoint Plus Flammable Toxic mA mA 3 3 Sensepoint Pro Flammable Toxic mA mA 3 3 Notes • No Channels Fitted Max No. Channels • No Channels Fitted = 4-20mA Inputs + mV Inputs Standard Supply Each Touchpoint controller is supplied complete with mounting bracket, instruction manual and requisite number of mV and mA input modules with factory default settings Shipping Details Shipping carton dimensions: L446mm (17.6") x W417mm (16.4") x D90mm (3.5") Approximate weight: 6kg (13.2lbs) System Overview Our Product Range Fixed Gas Monitoring Portable Gas Monitoring Honeywell Analytics offers a wide range of fixed gas detection solutions for a diverse array of industries and applications including: Commercial properties, industrial Find out more applications, semiconductor manufacturers, www.honeywellanalytics.com energy plants and petrochemical sites. When it comes to personal protection from gas hazards, Honeywell Analytics has a wide range of reliable solutions ideally suited for use in confined or enclosed spaces. These include: At Honeywell Analytics, we believe in the value of great service and customer care. Our key commitment is providing complete Find more andout total customer satisfaction. Here are just www.honeywellanalytics.com a few of the services we can offer: » Detection of flammable, oxygen and toxic Contact Honeywell Analytics: » Detection of flammable, oxygen and toxic gases Single gas personal monitors – worn by the individual Multi-gas portable gas monitors – used for confined space entry and regulatory compliance maintenance activities » Full technical support Contact Honeywell Analytics: » Expert team on hand to answer questions and queries Europe, Middle East, Africa » Fully equipped workshops to ensure Life Safety quickDistribution turnaroundAG on repairs Wilstrasse 11-U31 » Comprehensive service engineer network CH-8610 Uster » Training on product use and maintenance Switzerland » +41 Mobile Tel: (0)44calibration 943 4300service » Customised of Fax: +41 (0)44 943programmes 4398 preventative/corrective maintenance email@example.com gases (including exotics) Innovative use of 4 core sensing Europe, Middle East, Africa technologies – paper tape, Life Safety Distributioncell, AG catalytic bead electrochemical Wilstrasse 11-U31 and infrared CH-8610 Uster » Capability to detect down to Parts Per Switzerland Billion (ppb) or Percent by Volume (%v/v) Tel: +41 (0)44 943 4300 » Cost effective regulatory compliance Fax: (0)44 943 4398 +41 solutions firstname.lastname@example.org » » » Multi-gas transportable monitors – used Find out more for temporary protection of area www.honeywellanalytics.com during site construction and Contact Honeywell Analytics: » Extended warranties on products Americas Honeywell Analytics Distribution, Inc. 405 Barclay Blvd. Lincolnshire, IL 60069 USA Find out more Tel: +1 847 955 8200 www.honeywellanalytics.com Toll free: +1 800 538 0363 Fax: +1 847 955 8208 Contact Honeywell Analytics: email@example.com Europe, Middle East, Africa Life Safety Distribution AG Wilstrasse 11-U31 CH-8610 Uster Switzerland Tel: +41 (0)44 943 4300 Fax: +41 (0)44 943 4398 firstname.lastname@example.org Americas Honeywell Analytics Distribution, Inc. 405 Barclay Blvd. Lincolnshire, IL 60069 USA Tel: +1 847 955 8200 Toll free: +1 800 538 0363 Fax: +1 847 955 8208 email@example.com Europe, Middle East, Africa Asia Pacific Life Safety Distribution AG Honeywell Wilstrasse Analytics 11-U31 Asia Pacific #508, Kolon Science Valley (1) CH-8610 Uster 187-10 Guro-Dong, Guro-Gu Switzerland Seoul, 152-050, Tel: +41 (0)44 943 4300 Korea Fax: +41 (0)44 943 4398 Tel: +82 (0)2 2025 0307 firstname.lastname@example.org Fax: +82 (0)2 2025 0329 email@example.com Americas Honeywell Analytics Distribution, Inc. 405 Barclay Blvd. Lincolnshire, IL 60069 USA Tel: +1 847 955 8200 Toll free: +1 800 538 0363 Fax: +1 847 955 8208 firstname.lastname@example.org Asia Pacific Honeywell Analytics Asia Pacific #508, Kolon Science Valley (1) 187-10 Guro-Dong, Guro-Gu Seoul, 152-050, Korea Tel: +82 (0)2 2025 0307 Fax: +82 (0)2 2025 0329 email@example.com Americas Asia Pacific Honeywell Analytics Technical ServicesDistribution, Inc. Honeywell Analytics Asia Pacific 405 Barclay Blvd. firstname.lastname@example.org #508, Kolon Science Valley (1) Lincolnshire, IL 60069 187-10 Guro-Dong, Guro-Gu USA www.honeywell.com Seoul, 152-050, Tel: +1 847 955 8200 Korea Toll free: +1 800 538 0363 Tel: +82 (0)2 2025 0307 Please Note: Fax: +1 847 955 8208 While every effort has been made to ensure accuracy in this publication, no responsibility be accepted errors 0329 or omissions. Fax:can+82 (0)2 for 2025 email@example.com Data may change, as well as legislation, and you are strongly advised to obtain copies of the most recently issued regulations, firstname.lastname@example.org standards, and guidelines. This publication is not intended to form the basis of a contract. H_Touchpoint4_DS0315_V3_EMEA Asia Pacific 09/07 Honeywell Analytics © 2007 Honeywell AnalyticsAsia Pacific #508, Kolon Science Valley (1) 187-10 Guro-Dong, Guro-Gu Seoul, 152-050, Technical Services email@example.com www.honeywell.com Technical Services firstname.lastname@example.org www.honeywell.com 11136 » Technical Services Thank you for reading this data sheet. For pricing or for further information, please contact us at our UK Office, using the details below. UK Office Keison Products, P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England. Tel: +44 (0)1245 600560 Fax: +44 (0)1245 808399 Email: email@example.com Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.