14 inch

CrimpAll Tool Kit
™
3131 W. Chestnut Expwy.
Adjustment Screw
Do NOT loosen.
Tighten for more crimping force.
Loosen for less crimping force.
Springfield, MO 65802
800-276-2419 (toll-free U.S./Canada)
417-864-8161 (fax)
CrimpAll Tool Adjustment
Set Screw
Loosen before each adjustment.
Tighten after each adjustment.
417-864-6108 (phone)
www.wattsradiant.com
CrimpAll Tool Kit Components
3/8" Jaw
PCJ22
CrimpAll CrimpRing Tool
PCCRT1000
Go/No-Go Crimp Gauge
PCGA2346
CrimpAll Adjustment Tools
PCCRT1001
1/2" Jaw
PCJ33
5/8" Jaw
PCJ66
CrimpAll Jaw Installation
3/4" Jaw
PCJ44
NO GO!
GO.
NO GO!
The CrimpRing is not compressed
enough, and will not slide into
the “GO” slot of the gauge.
The CrimpRing slides into the
“GO” slot, but stops at the
shoulders in the “GO” slot.
The CrimpRing is compressed
too small, and slides all the way
into the “NO GO” slot.
Using the
Go/No-Go
Gauge
1.
2.
3.
4.
Loosen the screws.
Remove crimping jaws.
Insert new crimping jaw set.
Tighten the screws with the tool closed, and you’re ready to crimp.
1.
PEX
PEX
PEX
CrimpRing
CrimpRing
CrimpRing
© 2003 Watts Radiant, Inc.
CrimpAll Tool Kit Instructions
LIT#PCCRT10000703
Effective 07/22/03
2.
Extra jaw screws
included in kit.
3.
4.