HD74ALVC2G02

To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
HD74ALVC2G02
Dual 2-input NOR Gates
REJ03D0160–0400Z
(Previous ADE-205-611C (Z))
Rev.4.00
Dec.16.2003
Description
The HD74ALVC2G02 has two-input NOR gate in an 8 pin package. Low voltage and high-speed
operation is suitable for the battery powered products (e.g., notebook computers), and the low power
consumption extends the battery life.
Features
• The basic gate function is lined up as Renesas uni logic series.
• Supplied on emboss taping for high-speed automatic mounting.
• Supply voltage range : 1.2 to 3.6 V
Operating temperature range: −40 to +85°C
• All inputs VIH (Max.) = 3.6 V (@VCC = 0 V to 3.6 V)
All outputs VO (Max.) = 3.6 V (@VCC = 0 V)
• Output current
±2 mA (@VCC = 1.2 V)
±4 mA (@VCC = 1.4 V to 1.6 V)
±6 mA (@VCC = 1.65 V to 1.95 V)
±18 mA (@VCC = 2.3 V to 2.7 V)
±24 mA (@VCC = 3.0 V to 3.6 V)
• Ordering Information
Part Name
Package Type
Package Code
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74ALVC2G02USE
SSOP-8 pin
TTP-8DBV
US
E (3,000 pcs/reel)
Rev.4.00, Dec.16.2003, page 1 of 9
HD74ALVC2G02
Outline and Article Indication
• HD74ALVC2G02
Index band
Lot No.
Y M W
A 0 2
Y : Year code
(the last digit of year)
M : Month code
W : Week code
SSOP-8
Marking
Function Table
Inputs
A
B
Output Y
L
L
H
L
H
L
H
L
L
H
H
L
H:
L:
High level
Low level
Rev.4.00, Dec.16.2003, page 2 of 9
HD74ALVC2G02
Pin Arrangement
1A
1
8
VCC
1B
2
7
1Y
2Y
3
6
2B
GND
4
5
2A
(Top view)
Absolute Maximum Ratings
Item
Supply voltage range
Input voltage range
*1
Output voltage range
*1, 2
Symbol
Ratings
Unit
VCC
−0.5 to 4.6
V
VI
−0.5 to 4.6
V
VO
−0.5 to VCC+0.5
V
−0.5 to 4.6
Conditions
Output : H or L
VCC : OFF
Input clamp current
IIK
−50
mA
VI < 0
Output clamp current
IOK
±50
mA
VO < 0 or VO > VCC
Continuous output current
IO
±50
mA
VO = 0 to VCC
Continuous current through
VCC or GND
ICC or IGND
±100
mA
Maximum power dissipation
*3
at Ta = 25°C (in still air)
PT
200
mW
Storage temperature
Tstg
−65 to 150
°C
Notes:
The absolute maximum ratings are values, which must not individually be exceeded, and
furthermore, no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 4.6 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.4.00, Dec.16.2003, page 3 of 9
HD74ALVC2G02
Recommended Operating Conditions
Item
Symbol
Min
Max
Unit
Supply voltage range
VCC
1.2
3.6
V
Input voltage range
VI
0
3.6
V
Output voltage range
VO
0
VCC
V
Output current
IOH

−2
mA

−4
VCC = 1.4 V

−6
VCC = 1.65 V

−18
VCC = 2.3 V

−24
VCC = 3.0 V

2
VCC = 1.2 V

4
VCC = 1.4 V

6
VCC = 1.65 V

18
VCC = 2.3 V
IOL
Input transition rise or fall rate
Operating free-air temperature
∆t / ∆v
Ta

24
0
20
0
10
−40
85
Note: Unused or floating inputs must be held high or low.
Rev.4.00, Dec.16.2003, page 4 of 9
Conditions
VCC = 1.2 V
VCC = 3.0 V
ns / V
VCC = 1.2 to 2.7 V
VCC = 3.3±0.3 V
°C
HD74ALVC2G02
Electrical Characteristics
(Ta = −40 to 85°C)
Item
Symbol
VCC (V) *
Min
Input voltage
VIH
1.2
VIL
Output voltage
VOH
VOL
Typ
Max
Unit
VCC×0.75 

V
1.4 to 1.6
VCC×0.7


1.65 to 1.95
VCC×0.7


2.3 to 2.7
1.7


3.0 to 3.6
2.0


1.2


VCC×0.25
1.4 to 1.6


VCC×0.3
1.65 to 1.95


VCC×0.3
2.3 to 2.7


0.7
3.0 to 3.6


0.8
Min to Max
VCC−0.2


1.2
0.9


IOH = −2 mA
1.4
1.1


IOH = −4 mA
1.65
1.2


IOH = −6 mA
2.3
1.7


IOH = −18 mA
3.0
2.2


IOH = −24 mA
Min to Max


0.2
IOL = 100 µA
1.2


0.3
IOL = 2 mA
1.4


0.3
IOL = 4 mA
1.65


0.3
IOL = 6 mA
2.3


0.55
IOL = 18 mA
3.0


0.55
IOL = 24 mA
V
Test conditions
IOH = −100 µA
Input current
IIN
3.6


±5
µA
VIN = 3.6 V or GND
Quiescent supply
current
ICC
3.6


10
µA
VIN = VCC or GND,
IO = 0
Output leakage
current
IOFF
0


5
µA
VIN or VO =
0 to 3.6 V
Input capacitance
CIN
3.3

4.5

pF
VIN = VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating
conditions.
Rev.4.00, Dec.16.2003, page 5 of 9
HD74ALVC2G02
Switching Characteristics
(Ta = −40 to 85°C)
VCC = 1.2 V
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL

7.5

ns
CL = 15 pF
A or B
Y
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL
2.0

7.0
ns
CL = 15 pF
A or B
Y
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL
1.5

5.0
ns
CL = 30 pF
A or B
Y
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL
1.0

3.7
ns
CL = 30 pF
A or B
Y
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL
1.0

2.8
ns
CL = 30 pF
A or B
Y
VCC = 1.5±0.1 V
VCC = 1.8±0.15 V
VCC = 2.5±0.2 V
VCC = 3.3±0.3 V
Rev.4.00, Dec.16.2003, page 6 of 9
HD74ALVC2G02
Operating Characteristics
(Ta = 25°C)
Item
Symbol
VCC (V)
Min
Typ
Max
Unit
Test conditions
Power dissipation
CPD
1.5

10.5

pF
f = 10 MHz
1.8

10.5

2.5

10.5

3.3

11.5

capacitance
Test Circuit
VCC
Pulse
Generator
Input
Output
Z out = 50 Ω
CL
Symbol
RL
V CC = 1.2 V,
V = 2.5±0.2 V,
V = 1.8±0.15 V CC
1.5±0.1 V CC
3.3±0.3 V
RL
2.0 kΩ
1.0 kΩ
500 Ω
CL
15 pF
30 pF
30 pF
Note: CL includes probe and jig capacitance.
Rev.4.00, Dec.16.2003, page 7 of 9
HD74ALVC2G02
Waveforms
tr
tf
Input
VIH
90%
90%
V ref
V ref
10%
10%
t PHL
GND
t PLH
VOH
Output
V ref
V ref
VOL
Symbol
V CC = 1.2 V,
1.5±0.1 V, V CC = 2.5±0.2 V
1.8±0.15 V
V CC = 3.3±0.3 V
tr / t f
2.0 ns
2.5 ns
2.5 ns
V IH
VCC
VCC
2.7 V
V ref
50%
50%
1.5 V
Note: Input waveform : PRR = 10 MHz, duty cycle 50%
Rev.4.00, Dec.16.2003, page 8 of 9
HD74ALVC2G02
Package Dimensions
2.0 ± 0.2
1.5 ± 0.2
+ 0.1
(0.17)
8 − 0.2 − 0.05
Package Code
JEDEC
JEITA
Mass (reference value)
Rev.4.00, Dec.16.2003, page 9 of 9
+ 0.1
0.13 − 0.05
0 − 0.1
0.7 ± 0.1 (0.4)
2.3 ± 0.1
(0.5) (0.5) (0.5)
3.1 ± 0.3
(0.4)
Unit: mm
TTP–8DBV


0.010 g
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501
Renesas Technology Europe Limited.
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom
Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900
Renesas Technology Europe GmbH
Dornacher Str. 3, D-85622 Feldkirchen, Germany
Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11
Renesas Technology Hong Kong Ltd.
7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2375-6836
Renesas Technology Taiwan Co., Ltd.
FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
© 2003. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon 1.0