MIO-2261 Intel Atom N2600/ N2800 Pico-ITX SBC,

MIO-2261 Intel® AtomTM N2600/ N2800 Pico-ITX SBC,
DDR3, 18/24-bit LVDS, VGA, 1 GbE, Half-size Mini
PCIe, 4 USB, 2 COM, SMBus, I2C, mSATA & MIOe
Startup Manual
Packing List
Specifications
Before you begin installing your card, please make sure that
the following items have been shipped:
1. 1 MIO-2261 SBC
2. 1 Startup Manual
3. 1 Utility CD (including user manual and drivers)
General
• CPU: Intel® Atom™ Dual Core 1.6 GHz (N2600) /
1.86 GHz (N2800)
• System Chipset: Intel® Atom™ N2600/ N2800 + NM10
• System Memory: 1 x 204-pin SODIMM socket DDR3 800
MHz (N2600) /1066 MHz (N2800), up to 4 GB
• L2 Catch: 1 MB on die
• BIOS: AMI EFI 16 Mbit Flash ROM
• Watchdog Timer: 255 level interval timer
• Battery: Lithium 3 V/210 mAH
Note: How to clear CMOS (Must follow steps below):
4. 1 SATA cable
p/n: 1700006291
5. 1 Audio cable p/n: 1700019156
6. 1 COM cable p/n: 1701200220
7. 1 SATA Power cable
p/n: 1700019656
8. 1 USB cable
p/n: 1700002172
9. 1 AT power cable
p/n: 1700019705
1. Turn off system power.
10. 1 Heatsink
p/n: 1960055792T001
2. Unplug CR2032 battery cable on BH1.
11. Screw and stud pack (1 screw
for Mini PCIe, 4 M3 studs and
screws for heatsink) p/n: 9666226000E
3. Waiting for 15sec or short BH1 pin1-2.
If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
Note 1: For detailed contents of MIO-2261, please refer
to information on the enclosed CD-ROM (in PDF
format).
Note 2: Acrobat Reader is required to view any PDF
file. Acrobat Reader can be downloaded at:
http://get.adobe.com/reader/ (Acrobat is a trademark of Adobe)
4. Connect battery cable on BH1.
5. Turn on system power.
• Serial ATA: One SATA II interface, up to 300 MB/s
• USB: Four USB 2.0 compliant ports
• Audio: High definition audio (HD), line-in, line-out
• GPIO: 8-bit general purpose input/output
• Expansion Interface: Half size Mini PCIe, MIOe
MIOe Expansion Slot
• Interface: 2 x USB 2.0, 2 x PCIe x1, LPC, HD Audio
line-out, SMBus, DP or HDMI supported by request, 5
Vsb/12 Vsb
• Total peripheral power supply output: 5 V @ 3 A for
CPU board and MI/O Extension module totally, 12 V @ 2
A for MI/O Extension module
VGA/LVDS Interface
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://service.advantech.com.tw/support/
• Controller: Intel® N2600 / N2800, DirectX 9 and
OpenGL3.0 support
• Output Interfaces:
- VGA: Up to 1920 x 1200 (WUXGA)
- LVDS: Single channel 18/24-bit LVDS,
up to 1366 x 768 (WXGA)
- Dual Display: CRT + LVDS
Ethernet Interface
• Support single 10/100/1000 Mbps Ethernet interface
• Controller: Intel® 82583V (GbE1)
This manual is for the MIO-2261 Series Rev. A1
Part No. 2006226100
Printed in China
1st Edition
June 2012
MIO-2261 Startup Manual 1
Specifications Cont.
Mechanical and Environmental
• Dimensions: 100 x 72 mm (3.9” x 2.8”)
Mechanical Drawings are on page 4 - 6.
• Power Requirement: Single 12 V DC power input
• Power Consumption (with 1 GB memory):
- Typical in XP mode:
N2600: 0.35 A @ 12 V (4.2 W)
N2800: 0.46 A@ 12 V (5.52 W)
- Max in HCT:
N2600: 0.76 A @ 12 V (9.12 W)
N2800: 0.80 A @ 12 V (9.6 W)
• Operating Temperature: 0 ~ 60° C (32 ~ 140° F)
• Weight: 0.42 kg (0.93 lb) (reference total weight)
Jumpers and Connectors
The board has a number of jumpers that allow you to configure your system to suit your application. The table below
lists the function of each of the jumpers and connectors.
Jumpers and Connectors
Jumper Settings
J1
LCD Power / Auto Power On
Part Number
1653003260
Footprint
HD_3x2P_79
Description
PIN HEADER 3*2P 180D(M) 2.0 mm
SMD 21N22050
Setting
Function
(1-2)
+5 V
(3-4)*
+3.3 V
(5-6)*
Auto Power On
* default
Jumpers
Label
Function
J1
LCD Power / Auto Power on
Connectors
Label
Function
CN1
12V Power Input
CN2
DC JACK (support by request)
CN3
DDR3 SO-DIMM
CN4
GPIO
CN5
VGA
CN6
mSATA
CN7
SATA
CN8
Mini PCIe
CN9
External USB
CN10
Internal USB
CN11
COM1/ COM2
CN12
SMBus (or I2C, support by request)
CN13
Front Panel
CN14
Gigabit Ethernet
CN15
HD Audio
CN16
MIOe
CN17
Inverter Power Output
CN18
24 bits LVDS Panel
BH1
Battery
2 MIO-2261 Startup Manual
Caution! The computer is provided with a battery-powered
real-time clock circuit. There is a danger of explosion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended
by the manufacturer. Discard used batteries according to manufacturer’s instructions.
MIO-2261 Connector Locations
CN5
CN13CNCN13
CN15
CNCN
CN18
CN18
CN11
CN3
Figure 1: MIO-2261 Connect Location (Top Side)
CN1
CN5
CN9
CN14
CN7
J1
CN16
CN6
BH1 CN17
CN12 CN10 CN4
CN8
Figure 2: MIO-2261 Connect Location (Bottom Side)
MIO-2261 Startup Manual 3
MIO-2261 Mechanical Drawing
Unit: mm
Figure 3: MIO-2261 Mechanical Drawing (Top Side)
Unit: mm
Figure 4: MIO-2261 Mechanical Drawing (Bottom Side)
4 MIO-2261 Startup Manual
MIO-2261 Mechanical Drawing
Unit: mm
Figure 5: MIO-2261 Mechanical Drawing (Side View)
Unit: mm
Figure 6: MIO-2261 Mechanical Drawing (Side View with Optional DC/Jack)
MIO-2261 Startup Manual 5
MIO-2261 Mechanical Drawing
Unit: mm
Figure 7: MIO-2261 Mechanical Drawing (Side vew with Heatsink)
Unit: mm
Figure 8: MIO-2261 Mechanical Drawing (Side View wih Optional Heatspreader)
6 MIO-2261 Startup Manual
Download PDF
Similar pages
MIO-2262
User Manual MIO-2261
Audiovox ADV10A Tech Tip Update
datasheet for LYNC
User Manual - data
Datablad IMP
CD9A3
KS230-CD2800P