SV-1000-19SM P/N 1006694 GEMINI Tips To Get You Going QUICK Quickly QUICK START START Tips To Get You System Description Going Quickly Keyboard & Scratch Pad . Model LK-1000-19SM Rugged 19” 1U Rack Mount Display with Integrated For System System Configuration see the LK-1000-19SM Operation Manual (285-MNL-007) Description This server is unlike any other server that is currently on the market. The Gemini is contained within a 1U chassis that holds two completely independent servers complete with their own power supply. These removable servers allow the end user to extract one server while active programs are still running on the remaining server without interruption. For System Configuration see Gemini Technical manual . ACCESSING PRODUCT . Figure 1. Display Controls of LK-1000-19SM . . Figure 2. I/O Connections of LK-1000-19SM Start Up 1. Check to make sure that all the cables are seated and connected correctly to the back of the unit. 2. Check that all cables are attached to the main computer/server. 3. Press the power switch ON (power switch is located at the front of the unit). 4. Once the unit starts, System will go thru Power On self Test (POST) (no action is required at this time). 5. The screen will display all relevant computer / Server information. NOTE: Adjust screen display as required. . Shut Down 1. After operating system is shut down take power off the display screen by pressing the power switch located at the front of the unit.