250 0393

MM31760B
SPECIFICATIONS
UP TO 3.0 AMPS (1/8 HP @ 115V)
CALIBRATION
MINIMUM SPEED (MIN SPD)
MAXIMUM SPEED (MAX SPD)
The MIN SPD setting determines the motor speed when the
speed adjust potentiometer is turned full counterclockwise
(CCW). The MM31760B is factory set for minimum rated
speed.
The MAX SPD setting determines the motor speed when the
speed adjust potentiometer is turned full clockwise (CW). The
MM31760B is factory set for maximum rated speed.
To calibrate:
1. Set the MIN SPD trimpot to full CCW.
2. Turn the speed adjust potentiometer full CCW.
3. Adjust the MIN SPD trimpot until the desired minimum
motor speed is reached.
14300 De La Tour Drive, South Beloit, IL 61080
Phone: (800) MINARIK or (800) 646-2745; Fax: (800) 394-6334 or (815) 624-6960
Document Number 250-0393, Revision 0;
Price: $2.00; Printed in the U.S.A. – 1/05
To calibrate:
1. Set the MAX SPD trimpot to full CCW.
2. Turn the speed adjust potentiometer to full CW.
3. Adjust the MAX SPD trimpot until the desired maximum
motor speed is reached.
Copyright 2005 by Minarik Corporation - All rights reserved. No part of this manual may be reproduced or transmitted in any form without written permission from Minarik Corporation. The information
and technical data in this manual are subject to change without notice. Minarik Corporation and its Divisions make no warranty of any kind with respect to this material, including, but not limited to,
the implied warranties of its merchantability and fitness for a given purpose. Minarik Corporation and its Divisions assume no responsibility for any errors that may appear in this manual and make
no commitment to update or to keep current the information in this manual.