Click Here for product info sheets

2K AERO-SPRAY CLEARS
PRODUCT INFORMATION SHEET
Item #14148Z, 14792Z Rev. 10/13
PRODUCT TECHNOLOGY
2K Aero-Spray™ is a high quality 2-Component urethane clear coat delivered by
Eastwood’s unique 2-chambered aerosol. When activated the aerosol ensures the
correct mix ratio to produce a super durable coating that is long lasting and beautiful.
The adjustable nozzle allows you to customize the spray pattern to achieve the same
results as a professional paint gun.
Basis of Raw Material
Paint: Two-component acrylic resins
Hardener: Containing isocyanates
VOC-Value
4.4 lbs/gal (527 g/l)
APPLICATION
Recommended for
Parts and auto refinishing
Surface Preparation
Solvent and waterborne basecoats dried according to manufacturer instructions.
Old paint should be abraded with 600-800 grit sandpaper. Clean surface with
PRE Painting Prep.
ACTIVATE 2K AEROSOL
Before activating, shake aerosol vigorously for 2 minutes.
Take red button from cap. Turn aerosol 180° and attach button to pin
on aerosol bottom.
Place aerosol on firm ground – upside down. Press red button with the ball
of your hand until stop is reached.
After activating, shake aerosol vigorously for another 2 minutes.
Protection
Personal protection is required
Respiratory mask type A2/P2
Protective gloves,
made from latex or nitrile
APPLICATION
Spray passes
1-2 spray passes with 50% overlap. Approx. 1.2 mil per spray pass.
3-7 minutes flash between coats, depending on temperature.
Drying
Full cure in 12 hours at 68°F
35-40 minutes at 140°F (IR drying)
Pot life
48 hours at 68°F ambient temperature. The pot life depends on the ambient
temperature. Higher temperatures give a shorter pot life, lower temperatures
give a longer pot life.
CHARACTERISTICS
Solid content
33.8% by weight relating to the diluted paint.
Coverage
Approx. 25 - 35 sq. ft. / aerosol at a dry film thickness of 1.2mm
Finish
When work is finished, reverse aerosol and spray valve empty.
Disposal
The emptied aerosols are suitable for household collection.
Shelf life
24 months / 68°F
Remarks
For professional use only. Respiratory protection MUST be worn.
Apply in a well ventilated area away from open flame.
The information contained in this paper corresponds to our present knowledge and is a guide to our products and their uses. It is not to be understood as a guarantee
for certain properties of our products and their uses. It is not to be understood as a guarantee for certain properties of our products or of their specific applications.
The warnings printed on our labels must be respected. Any industrial property rights should be observed.