Smart Vision Lights SOBL Backlight

SOBL Series
Diffuse Backlight
BACKLIGHT
product introduction
The SOBL Backlight series of lights are an innovative and highly versatile light with many custom sizes available. The SOBL Series
of backlights offers backlit LED’s for a more intense and highly diffuse lighting option. With its built in driver, no external wiring is
needed and its narrow depth of just 30mm allows for mounting in tight locations. Sizes range in dimension from 150mm x 50mm to
600mm x 600mm. Contact Smart Vision Lights for larger dimensions.
product features
ƒ
30mm 80/20 extrusion
ƒ
Driver built in – No External wiring to a driver
ƒ
PNP and NPN Strobe input
ƒ
Continuous operation or Strobe mode
ƒ
Analog intensity 0-10VDC signal
ƒ
Limited Custom sizes available
ƒ
Offered in White, Red, Green, Blue, IR
product specifications
Electrical Input
24 VDC +/- 5%
Current
Based on size. Contact Smart Vision Lights
Wattage
Strobe Input
PNP Line
Based on size. Contact Smart Vision Lights
PNP ► +3VDC or greater to activate.
│ NPN ► GND (<1VDC) to activate
3.7mA @ 3VDC │6.2mA @ 5VDC │ 12.6mA @ 10VDC │
30.4mA @ 24 VDC
NPN Line
22mA @ Common (0VDC)
Continuous Mode
Light will be in continuous mode by leaving signal on strobe input active
Analog Intensity
The output is adjustable from 10 -100% of brightness by a 0 -10 VDC signal
Connection
5 pin M12 connector
Lifespan
100,000 hrs
Ambient Temp.
-20º - 50º C (-4º - 122º F)
IP Rating
IP50
Compliances
CE and RoHS
Weight
Based on size. Contact Smart Vision Lights
IEC 62471 Rating
See page 3
Smart Vision Lights • 2359 Holton Rd. • Muskegon, MI 49445 •Phone 231.722.1199
www.smartvisionlights.com
www.stemmer-imaging.com
product number key
SOBL – XXX x XXX - XXX ─» Part Number Key
Product Family:
Backlight
SOBL
Dimension:
Measured active area.
(mm)
Color:
470, 530, 625,
850, WHITE
CE and RoHS Compliant
warnings
!
Attention
Please note that the power requirements vary according to size. Contact Smart Vision Lights for more
information regarding current and wattage ratings.
wiring configuration
Standard M12 mating cable color code:
1 – 24V
2 – NPN
3 – GND
4 – PNP
5 – 0-10V
BROWN
WHITE
BLUE
BLACK
*GRAY (GREEN/YELLOW)
If Analog 0-10 VDC is not used to control light intensity;
+VDC (24VDC) must be connected to Analog Input - Jumper pin 5 to pin 1
PIN
Wire Color
Function
Signal
1
BROWN
Power
+24 VDC
2
WHITE
NPN Strobe
GND for Active ON
3
BLUE
Ground
GND
4
BLACK
PNP Strobe
4VDC to 30VDC for Active ON
5
GREEN
Analog Intensity Control
0-10 VDC
Smart Vision Lights • 2359 Holton Rd. • Muskegon, MI 49445 •Phone 231.722.1199
www.smartvisionlights.com
www.stemmer-imaging.com
optical performance
The SOBL offers a very diffuse light pattern at any defined working distance. The Pixel Graph representation shows a
steep drop off in intensity outside of the active area with a very diffuse light pattern inside.
Average Intensity Rating
30,000 lux
*Lux measurement taken at surface of SOBL.
All mounting is provided by
the standard 30mm 80/20
extrusion.
Polarizer options are available.
Contact Smart Vision Lights for more
information.
Mounting
Polarizer
risk group
According to IEC 62471:2006. Full documentation upon request.
Notice
Exempt Group: No photo biological hazard to eyes or skin even for continuous, unrestricted use.
Applicable for wavelengths: 625, and 850.
Caution
Risk Group 1: Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May
be harmful to eye. Safe for most applications except prolonged exposures.
Applicable for wavelengths: 470, 530, and WHI.
Smart Vision Lights • 2359 Holton Rd. • Muskegon, MI 49445 •Phone 231.722.1199
www.smartvisionlights.com
W W W. S T E M M E R- I M A G I N G . C O M . I M A G I N G I S O U R PA S S I O N
GERMANY
AU ST R I A
Phone: +49 89 80902-0
info@stemmer-imaging.de
UNITED KINGDOM
IRELAND
Phone: +44 1252 780000
info@stemmer-imaging.co.uk
FRANCE
Phone: +33 1 45069560
info@stemmer-imaging.fr
SW I T Z E R L A N D
L I E C H T E N ST E I N
Phone: +41 55 415 90 90
info@stemmer-imaging.ch
THE NETHERLANDS
B E LG I U M . L U X E M B O U R G
Phone: +31 575 495159
info@stemmer-imaging.nl
B-SVL27-08/2013 ∙ Subject to technical change without notice. No liability is accepted for errors which may be contained in this document.
mounting & accessories