XEMIO-200 USER MANUAL
Special Features
• Elegant appearance and easy to use.
• Multi-Code Player - Supporting MP1, MP2, MP3, WMA, formats.
• Driver Free U Disk - You may manage your files directly through
“Portable Device” in “My Computer” on Windows 2000 Operating
System or above without driver.
Brief View of Player
A. About player’s battery
Player has an internal, non–user-replaceable rechargeable
lithium battery. For best results, the first time you use the player, let
it charging for about 1 - 2 hours or until the charging LED lights go
Off before you use it.
Charging the Battery
You can charge the Player’s battery in two ways:
1. Connect player to your computer. Or,
2. Use the USB power charger. (available separately)
B. Insert Micro SD Memory Card
This device is design without an internal memory; put a Micro SD
memory card insert into the memory card slot before use the player.
• Plug in the Micro SD memory card into player card slot at side,
now you can use the player.
• You can upload your desired media files to the player, or, you can
upload your desired media files to the Micro SD memory Card
direct with your computer before insert it to the player.
• When you want to insert / remove the Micro SD memory card
from memory card slot. Make sure the player is in Off status.
Otherwise, the player functional may dead halt or the internal
data / files will be lost / damaged.
Note: The status indicator light will be flashing fast and then will go
Off, when you want to turn On the player. However, the player will
1
XEMIO-200 USER MANUAL
turn Off automatically If no memory card has inserted to player’s
card slot.
C. Key function of buttons
Appearance
• Power ON – OFF switch: Main Power On and Off
button: To Play / Pause or Standby On / Off.
•
•
button: To previous song or fast-backward.
•
button: To the next song or fast-forward.
•
button: To increase volume level.
•
Button: To decrease volume level.
• USB: For PC connection and charge function
D. Getting start player
1 Turn On / Off
1.1 Plug in earphone set into player’s jack
1.2 Slide the Power ON – OFF to “ON” position, the player will
turn On and play music directly. (make sure the Micro SD
memory card has plugged
2
XEMIO-200 USER MANUAL
1.3 Press and hold
button, for about 2 - 3 second, the
player will turn Off and On in standby mode.
2 Play / Pause Music
2.1 Press
button to pause the playing music, press it again
to play.
2.2 If player is in pause state for 3 minutes, it will be turned to
Off automatically.
3 Adjust Volume
3.1 Pressing
/
button to increase or decrease volume
level.
3.2 Press and hold
/
button to increase or decrease
volume level faster.
3.3 For hearing protection; a beep warning will be heard from
earphone every time you increase the volume level and
reach to the default setting level, which may exceed 85dB.
Press
button to accept the warning and press
/
button again to increase the level until to maximum level.
4 Play Next / Previous Music
4.1 In playing mode, press
button to select next music.
4.2 Press
button to select previous music.
5 Play Fast-Forward / Fast-Backward
5.1 In playing mode, press and hold
button to enter
fast-forward mode.
5.2 Press and hold
button to enter fast-backward mode.
E. USB mode
1 Connect player to computer
1.1 Connect player to computer with the USB cable, then a
“USB Mass Storage Device” is detected and related driver
is installed by you computer. (Windows 2000 / XP System
or about)
1.2 A removable disk drive will be shown in “My computer”
3
XEMIO-200 USER MANUAL
folder, now you can start Read / Write operation. And the
battery is charging in background.
1.3 In connection mode, the player can be play music if you
press or pressing the play button. However, the player
may stop or start playing if removing the PC connection.
2 Remove player from computer:
Please safety to removes the player in computer, otherwise, the
data stored in the Player might loss.
2.1 If you’re using a Windows PC, you can disconnect the
player in My Computer or by clicking the “Safely Remove
Hardware” icon in the Windows system tray.
2.2 If you’re using a Mac, you can also disconnect player by
dragging the player icon on the desktop to the Trash.
2.3 And now, is safe to disconnect the player with your
computer, unplug the USB connector from player and then
your computer.
2.4 If you’re accidentally disconnect player without disconnect
it, reconnect it to your computer.
2.5 At power ON mode, after remove the PC connection, the
player will auto-play the music directly.
F. Indicator light function
• Playing Mode: LED light flashing once per second.
• Pause Mode: LED light bright.
• PC Connecting Mode: LED light bright. (Charging
background)
• Recharging Mode: LED light bright.
• Recharge complete: LED light will go OFF
4
in
XEMIO-200 USER MANUAL
G. Troubleshooting
Play cannot turn • Check whether battery have enough
ON
energy.
• Check whether the main power ON-OFF to
slide to ON position or not.
No
sound
is • Check whether Volume is set to “minimum”
heard
and connect the headphone plugs firmly.
• Check whether the headphone plug is dirty.
• Corrupted WMA / MP3 may make a static
noise and the sound may cut off. Make sure
that the music files are not corrupted.
• Check whether music files format are
support.
Download
of • Check whether player’s USB connector is
music files fails.
connected with computer properly.
• Check whether driver is installed correctly.
• Check whether the player’s memory is in
full.
• Check whether the Micro SD memory card
is inserted.
H. Specification
Dimension
Weight
PC Connection
Earphone
Impedance
Internal Memory
External Memory
Battery
43 mm (H) x 29.8 mm (W) x 15 mm (D)
14.5 g
USB 2.0 (High Speed)
32 Ohm
Nil
Micro SD Memory Card (up to 8GB)
Built-in Rechargeable Lithium battery (3.7V
110mA)
5
XEMIO-200 USER MANUAL
Playing Time: about 4-5 Hours
Supports Music MP3
32kbps - 320kbps
Format
WMA
32kbps – 384kbps
Audio
Earphone Output L: 275mV (32 Ohm)
Power
R: 275mV (32 Ohm)
Frequency
20Hz – 20,000Hz
Response
SNR
80dB
Operation
-0℃ - 40℃
Temperature
Operation
Windows
98/SE/ME2000/XP/Vista/Win7,
Systems
MAC9.2 or above
Note: Product design and specification are subject to change
without prior notice.
I. Recycling
If at any time in the future you should need to dispose
of this product, please note that: Waste electrical
products should not be disposed of with household
waste. Please recycle where facilities exist. Check with
your Local Authority or Retailer for recycling advice.
(Waste Electrical and Electronic Equipment Directive)
WARNING: Prolonged exposure to loud sounds from
personal music players may lead to temporary or permanent
hearing loss.
6
XEMIO-200 USER MANUAL
Products with the CE marking comply with the EMC
Directive (2004/108/EC) and the Low Voltage
Directive (2006/95/EC) issued by the Commission of
the European Community.
For information and support, www.lenco.com
®All rights reserved
7