62XX-501-11
9A448001
Installation Instructions
INS-9A448001 (Rev. D)
Tools required:
#2 Phillips Drive Screw driver or #2 Square bit drive
1
The bracket for the IV Pole does
not come assembled. Please follow
steps 2-5 to ensure proper installation.
2
Select location of IVP Bracket (left or
right). Secure bracket to worksurface
(see below diagram for placement
of bracket)
3
4
Parts Included:
(1) IVP Mounting Bracket
(1) IVP Pole
(1) 1/4-20 x 3/8” Long Pan Head Machine Screws
(3) #10 x 3/4” Long Pan Head Recex Low Root Screws
Insert and tighten bottom
(3) screws.
Insert IV Pole. Insert and tighten
screw on back of bracket.
Left or Right Locations
Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com