XS400 Sine Wave Inverter
Provides 400 watts of clean sine wave AC power for your sensitive
entertainment electronics
Offering superior quality sine wave output, the Xantrex XS400 Sine Wave Inverter is designed to
power entertainment systems in boats and recreational vehicles. Its clean utility-grade output
does not produce noise and distortion on TVs, VCRs, DVDs and stereos. The XS400 supplies up
to 400 watts of continuous power and with a surge rating of 800 watts, it can power complete
entertainment systems including two 27” televisions.
LR 86581
UL 458
CSA 107.1
CSA/NRTL certified to UL & CSA standards
With its robust electronic design, the XS400 also includes a built-in transfer switch that
automatically transfers between inverter power and incoming AC power. The inverter comes
standard with dual GFCI outlets and AC hardwire connections that increase installation options
and safety.
Product Features
400 watt inverter with 800 watt surge provides sufficient power for two entertainment systems
Filtered sine wave output will not produce distortion on sensitive electronics
Built-in transfer switch automatically transfers between inverter power and incoming AC power
DSP control technology starts complex loads with ease
Dual GFCI outlets and hardwire AC connections
CSA/NTRL certified to UL458 and CSA 107.1
One year warranty
Protection Features
Battery over-voltage and under-voltage protection
Over temperature shutdown
Automatic overload protection
Short circuit protection
Ground fault protection (GFCI)
Xantrex Technology Inc.
Headquarters
8999 Nelson Way
Burnaby, British Columbia
Canada V5A 4B5
800 670 0707 Toll Free
604 420 1591 Fax
5916 195th Street NE
Arlington, Washington
USA 98223
800 446 6180 Toll Free
360 925 5143 Fax
www.xantrex.com
© 2005 Xantrex Technology Inc. All rights reserved. Xantrex is a registered trademark of Xantrex International. Printed in Canada
Smart choice for power
400 Watt Sine Wave Inverter with Transfer Switch
Electrical Specifications
Output power
400 watts
Surge rating (5 seconds)
800 watts
Output current (peak)
10 A
Output voltage (at no load)
120 VAC +/-3 V
Output voltage (over full load and battery voltage range)
120 VAC RMS +/-5 V
Output frequency
60.0 +/-0.05 Hz
Output waveform
Sine wave (<3% THD)
Peak efficiency
88 %
No load power draw
<15 W
Power draw in standby mode
0 watts
Input operating voltage range
10.3 - 15.3 VDC
Transfer relay rating
6A
General Specifications
Operating temperature range
32ºF – 104ºF (0ºFC – 40ºC), derated linearly to 300 W at 122ºF (50ºC)
Storage temperature range
-22ºF – 158ºF (-30ºC – 70ºC)
AC receptacle
Dual three-prong GFCI outlets and hardwire
Recommended DC fuse
80 A
Dimensions (H x W x D)
3.7 x 7.4 x 13.5” (83 x 187 x 343 mm)
Remote switch
Included with unit (808-2400)
Weight
10.0 lb (4.6 kg)
Part Numbers
806-0400 Single unit packaging (1 per box)
Regulatory Approvals
CSA/NRTL certified to UL 458 and CSA C22.2 No. 107.1
EMC: FCC Class B
Note: Specifications subject to change without notice.
© 2005 Xantrex Technology Inc. All rights reserved. Xantrex is a registered trademark of Xantrex International. Printed in Canada