Split one dual link DVI source
to four dual link DVI outputs
EXT-DVI-144DL
Split one Dual Link DVI source to four
Dual Link DVI outputs
Features:
The 1:4 DVI Dual Link Splitter distributes a dual link DVI
source to four DVI dual link outputs, without losing quality or
resolution. It works with any dual link DVI computer supporting
resolutions up to 2560 x 1600. The DVI-DL Splitter supports
internal or pass-through EDID selections, output masking on/off,
and can be placed in standby mode, which keeps the unit idle
using only 1W of power when the source is inactive. Using the
RS-232 port allows making mode changes for the EDID and
output masking in addition to firmware upgrade
•
•
•
•
•
•
•
•
How It Works
Specifications*:
Connect the DVI dual link from the source computer to the input
port on the 1:4 DVI Dual Link Splitter, using the included 6 ft.
dual link cable. Connect up to four dual link DVI devices to the
four outputs on the Splitter. Connect the provided locking power
supply to the Splitter and the AC power cord to an available
electrical outlet.
•
•
•
•
•
•
•
•
•
•
•
Distributes a dual link source to four DVI dual link outputs
Supports 1080p, 2K, and 2560 x 1600 resolutions
EDID management for rapid integration of source and displays
Output masking
Field upgradeable via RS-232
Standby mode
Locking power supplies
Rack-mountable
Maximum Pixel Clock: 2 x 165 MHz
Input Video Signal: 1.2V p-p
IInput DDC Signal: 5V p-p (TTL)
Video Input Connector: (1) DVI-D, 29-pin, female
Video Output Connectors: (4) DVI-D, 29-pin, female
RS-232 Port: DB-9, female
Power Consumption: 20 W (max.) / 0.5 W (standby)
Power Supply: 5V DC, Locking
Operating Temperature: 0 - 40 °C
Dimensions: 17.1" W x 4.2"D x 1.75" H
Shipping Weight: 5 lbs.
Gefen, LLC
20600 Nordhoff Street, Chatsworth CA 91311
Tel. (818) 772-9100 (800) 545-6900 Fax (818) 772-9120
www.gefen.com
*Specifications are subject to change without notice.