334 3141 talos drh1032 buyers guide

System Quick Installation
1. Camera and power connections
Recording will start automatically, default setting is continuous recording for all camera channels
CONFIGURATION FOR AUDIO RECORDING
4. Select the RECORD menu (DAY/NIGHT/WEEKEND schedules are set individually)
1. CAMERA INPUTS - Connect cameras to BNC ports (SDI 1080 or 720 do not combine)
5. Select the [TIME+] menu and set the Frame & Quality for continuous recording (Refer to the below ※RECORD TIP※)
For motion recording, set the [EVENT+] menu
6. Select the AUDIO menu and turn ON to record audio
2. VIDEO MAIN MONITOR - Connect HDMI cable (Recommend) or VGA cable
5
4
3. AUDIO INPUTS & OUTPUTS - Connect Audio devices to inputs and speakers to output
6
4. POWER - Connect the power cable and turn on the DVR system
Refer to the User Manual for NETWORK, SPOT Monitor, Alarm and PTZ usage
※ RECORD TIP ※ - Select [TIME +] or [EVENT+] menu to adjust the recording quality
2. SYSTEM START-UP
After the system start-up is completed the operator must login
1. High Quality Record
To access the menu and functions you will need to enter the user password
(default is “1111”)
Using the NUMERIC buttons, key in the default admin password
then select the check mark and press ENTER
KEY
System menu options
1
2
3
4
To access the system options menu, press the
button of remote control or
front panel controls. If using a mouse move the mouse cursor to the top of the
screen to access the system menu
5
2. Normal Quality Record
3. Low Quality Record
CAMERA
TIME +
EVENT +
1
7.5, HIGHEST
7.5, HIGHEST
CAMERA
TIME +
EVENT +
1
3, NORMAL
3, NORMAL
CAMERA
TIME +
EVENT +
1
1, LOW
1, LOW
TOP MENU
1.
2.
3.
4.
5.
6
SEARCH – Opens the Search menu
BACKUP – Opens the Backup menu
STATUS – System log, Disk Health check, Record, Audio and Version
MENU – Access to system setup
LOGOUT – Logout current user
CONFIGURATION FOR MOTION RECORDING
1. Select the Settings Menu
BOTTOM MENU
6. DISPLAY – Changes display screen split options
1
3
4
2. Select the EVENT SETUP Menu
3. RECORD SETUP
RECORDING CONFIGURATION SETUP
1. Select the settings menu button
1
2. Select the Schedule settings Icon
2
3. Select the MOTION Menu
3
4. For Motion recording, change the ACTIVE + menu to [ON]
Then select the [ACTION] menu and change
2
3. Set the DAY TIME. (Default is AM 6:00 to PM 6:00)
The NIGHT TIME is set automatically depending on the DAY TIME
5. Select the [ACTION] menu and change the [RECORD] menu to [ON]
If set to [OFF], Continuous recording is activated
5
System Quick Installation
4. SEARCH
6. DDNS Setup
QUICK SEARCH
1. Select the SETUP Menu
1. Select the SEARCH Menu
2. Select the CALENDAR Menu
3. Select the Date
2
1
4. Select the Hour
3
1
4
5
2. Select the NETWORK Menu
5. Select the Minute
2
4
5
3. Select the DDNS Menu.
4. Select the DDNS SERVER [ddnsdvr.com]
5. Input the additional information for DDNS. (Refer to the below steps)
DDNS Host name should be [USER-DOMAIN.DDNSDVR.COM] (Example: talos-security.ddnsdvr.com)
3
※ How to register DDNS server
PLAYBACK CONTROL
In the Search mode, the following icons appear at the bottom of search screen
1. In web browser, connect www.ddnsdvr.com
2. Click the [New Account] menu and input the User / Email / Password / Confirmation then click the [Register] button
1
2
3
4
5
6
7
1.
Playback Controls- Forward, Reverse and Pause
2.
Section Repeat – loops playback of selected video
3.
Display – Change the multi view mode
4.
Rotate – Rotate current multi screen
5.
Preview – Enter preview mode
6.
Motion Area – Select motion area for museum search
7.
Setup menu – Enter the setup menu
8.
Exit – Escape from search screen
8
3. Click the [Log In] menu and log in by the created new account
5. BACKUP – Internal DVD / USB device
5. Click the [New hostnames] and make new host name
 In DVR menu, should be inputted full host names such as [talos-security.ddnsdvr.com]
1
1. Select the BACKUP Menu
2
3
5
4
3. FROM & TO : Select beginning time (From) and ending time (To)
4. BACKUP TITLE : Enter a title for backup file name
6
7
2. TARGET : Select the device to backup (DVD or USB)
5. SELECT CAMERA : Select camera channel(s) for backup
6. ESTIMATE : Amount of data being requested and media data size
7. WRITE : Start backup process
6. Click the [List hostnames] and check the created hostname
System Quick Installation
WEB CONNECITON
Mobile Viewer (Apple & Android)
For using web connection through internet ,7000 and 80 ports should be
forwarded in the Router
1. Download the [mpocketdvr] on the iTunes App store (Free software)
Download the [pocketdvr] on the Google Play store (Free software)
2. Open the [mpocketdvr] or [pocketdvr] press the [+] button and input the DVR information
1. Open the Internet Explore
2. Input the IP address or Domain name of DVR
•
•
•
http://210.58.xx.xx.
http://test.ddnsdvr.com
In case of other Web port, input the address as
http://test.ddnsdvr.com:XXXX
( ‘XXXX’ is assigned web port number)
3. User must allow ActiveX download
* If windows does not allow Active X to download,
go to the Security Tab on IE and check all ActiveX
to Enable
4. Install the ActiveX
3. Press the [Save] button and then click the registered DVR from the list
5. Input ID & Password then click the Connect button
4. To playback, press the [Search] button and select the date and time to search
Web Viewer Function buttons
1
2
3
1. Time and Date Display
2. Screen division buttons
1/4/9/16/6/7/10/13/16 and Full screen option
3. Functions buttons
A. Screen color setup
B. PTZ control
C. Alarm control
D. Search
[ Live screen]
[Search Screen]
[Search Screen]