MADERA FloWise 15" HIGH 1.28 GPF FLUSHOMETER TOILET SYSTEM

MADERA™ FloWise® 15" HIGH
1.28 GPF FLUSHOMETER TOILET SYSTEM
less EVERCLEAN ®
SELECTRONIC ® EXPOSED AC FLUSH VALVE
MADERA™ FloWise ® 15" HIGH 1.28 GPF
FLUSHOMETER TOILET SYSTEM less EVERCLEAN ®
❏2234.712 1.28 gpf 15" High Top Spud Bowl and
Selectronic ® Exposed AC Flush Valve
BOWL:
• Floor mount elongated flushometer valve toilet
• Vitreous china
• High Efficiency. Operates in the range of 1.1 gpf to
1.6 gpf (4.2 Lpf to 6.0 Lpf)
• 15" rim height
• Powerful direct-fed siphon jet action
• Fully glazed 2-1/8" trapway
• Condensation channel
• 10" or 12" roughing-in
• 10" x 12" water surface area
• 1-1/2" inlet spud
• 100% factory flush tested
• Less toilet seat
• Model 2234.001
SELECTRONIC ® FLUSH VALVE:
• Self-Cleaning Piston with integral wiper spring
significantly reduces clogging and maintenance
• Selectronic ® Proximity System with universal sensor
provides hygienic, "hands free" operation
• State-of-the-Art Electronics prevent ghost flushing
• Dezincification Resistant semi-red brass alloy
• Fully Mechanical Manual Override Button can flush
the valve without power
• Fail-Safe: Valve automatically closes upon loss of
power or water pressure and does not need to be reset
• Adjustable Sanitary Flush cleans the fixture &
maintains the trap seal.
• Chemical Resistant EPDM Seals for extended life
• Adjustable Tailpiece for rough-in flexibility
• Can be installed left or right handed
• Includes Class 2 UL certified universal hard-wired
AC transformer
• Optional cover plate only required for installation
from the front
• Model 6067.121
Includes:
• 047007-0070A Inlet Spud (furnished with bowl)
• 481310-100 2 Bolt caps with retainers (furnished
with bowl)
• 1" I.P.S. angle stop with back-flow protection
and vandal resistant cap
• 1" Sweat solder kit including cover tube and wall flange
• 1-1/2" High back pressure vacuum breaker,
spud coupling and flange
© 2015 AS America Inc.
N65
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
High-Efficiency Toilet System
• 20% water savings when compared to 1.6 gpf
toilet systems
System MaP* Score:
•1
,000 grams of miso @ 1.28 gpf
*M
aximum Performance (MaP) testing performed by
IAPMO R&T Lab. MaP Report conducted by Veritec
Consulting, Inc. and Koeller and Company.
Operating Pressure:
Overall Range: 20-125 psi**
Recommended: 25 psi (flowing)-80 psi (static)
** Water pressure over 80 psi is not recommended
for most plumbing fixtures.
Flow Requirement:
25gpm (94.6 L/min.)
Nominal Fixture Dimensions:
718 x 356 x 381mm (28-1/4" x 14" x 15")
To Be Specified:
❏ Color: ❏ White
❏ Seat:
❏ American Standard #5901.100
Heavy duty open front less cover
❏ American Standard #5905.100
Extra heavy duty open front less cover
spec_2234.712 Rev. B 4/15
MADERA™ FloWise® 15" HIGH
1.28 GPF FLUSHOMETER TOILET SYSTEM
less EVERCLEAN ®
SELECTRONIC ® EXPOSED AC FLUSH VALVE
Fixture Compliance Certifications Meets or Exceeds the Following Specifications:
Valve Listings:
• ASSE 1037
• ANSI/ASME A112.19.2
• ADA Compliant
• ASME A112.19.2-2008 / CSA B45.1-08 for
Vitreous China Fixtures
Hubbel-RACO 8192 4" ELECTRICAL BOX
OR EQUIVALENT BY CONTRACTOR
FINISHED WALL
51mm (2") HOLE
FOR CONDUIT
180˚
718mm
(28-1/4")
102mm
(4")
72mm
(2-7/8")
305mm 45˚
(12" MAX.)
15˚
SUPPLY
DN 25mm
(1" I.P.S.)
DETECTION ZONE
400mm-800mm
(15-3/4" TO 31-1/2")
86mm
(3-3/8")
-C-L-
409mm
(16-1/8")
-C-L152mm
(6") MIN.
293mm
(11-1/2")
470mm
(18-1/2")
-C-L-
108mm -134mm
(4-1/4" - 5-1/4")
791mm
(31-1/8")
C/L OF SEAT POST HOLES
140mm (5-1/2") CENTERS
25mm
(1")
356mm
(14")
381mm
(15")
FINISHED
FLOOR
13mm
(1/2")
254mm
(10")
150mm
(5-7/8")
338mm
(13-5/16")
238mm
(9-3/8")
C/L OF OUTLET
*Note: The Critical Line (-C-L-) on Vacuum Breaker
must typically be a minimum of 152mm (6") above
fixture. Consult Codes for details.
VALVE LEFT or RIGHT HAND INSTALLATION
NOTES:
TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM
BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST
VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.
THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 254MM (10") AND A MAXIMUM DIMENSION OF 305MM (12") FROM
FINISHED WALL TO C/L OF OUTLET.
FLUSHMETER VALVE REQUIREMENTS FOR 12" (305MM) ROUGH-IN:
SWEAT EXTENSION NIPPLE IS REQUIRED.
REFER TO VALVE MANUFACTURER AND LOCAL CODES
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
© 2015 AS America Inc.
N66
spec_2234.712 Rev. B 4/15