Fiber Optic Faceplate Fiber Optic

Fiber Optic Faceplate
2 Ports
Instructions
Fiber optic faceplate (Network kneading board)
2pcs SC Fiber port
Features
Features:
Radian appearance makes it slinky
Suitable for various modules and multimedia interfaces
Embedded chart and logo position make it easy to identity
Support MM or SM fiber connection
Suitable for FC, LC, SC, ST… adapters
Application:
FTTH
Optical communication system
Components:
--SC/APC/SM, Simplex adapter
1pc
--dummy SC adapter for empty port using
1pc
--SC/APC/SM, G657A pigtail, OD=0.9mm, L=1.5M
--Screw, protect heatshrink tube 1set
--English manual
1pc
1pc
Installation Steps:
1. Prepare faceplate, components and tools
2. Prepare the faceplate base
(installed on the wall)
3. Remove the central plastic
4. Put the adapters in
5. Lead the fiber cable in through the
central hole, then fix the faceplate on the base
6. Insert the connector of pigtail into
adapter, circle the pigtail
7. Splice the fiber cable and pigtail,
protect them by heatshrink tube
8. Close the faceplate cover
10. Finish installation
9. Insert the pigtail/patch cord to
adapter
Specification:
Name
Material
ABS
Color
White or Ivory
Size
85*85*28mm