Marantz CD5004 Operating Instructions Manual user guide

ESPAÑOL
FRANÇAIS
CD Player
CD5004
Downloaded From Disc-Player.com Marantz Manuals
ENGLISH
ENGLISH
FRANÇAIS
ESPAÑOL
n SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING:
IMPORTANT SAFETY
INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
13.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY
ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
n Laser Class (IEC 60825-1:2001)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. Batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
CAUTION:
To completely disconnect this product from the mains, disconnect the plug
from the wall socket outlet.
The mains plug is used to completely interrupt the power supply to the unit
and must be within easy access by the user.
PRECAUTION:
Pour déconnecter complètement ce produit du courant secteur, débranchez
la prise de la prise murale.
La prise secteur est utilisée pour couper complètement l’alimentation de
l’appareil et l’utilisateur doit pouvoir y accéder facilement.
PRECAUCIÓN:
Para desconectar completamente este producto de la alimentación eléctrica,
desconecte el enchufe del enchufe de la pared.
El enchufe de la alimentación eléctrica se utiliza para interrumpir por completo
el suministro de alimentación eléctrica a la unidad y debe de encontrarse en
un lugar al que el usuario tenga fácil acceso.
I
Downloaded From Disc-Player.com Marantz Manuals
FCC INFORMATION (For US customers)
1. PRODUCT
This product complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this product may not cause harmful
interference, and (2) this product must accept any interference received,
including interference that may cause undesired operation.
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained
in this manual, meets FCC requirements. Modification not expressly
approved by Marantz may void your authority, granted by the FCC, to use
the product.
3. NOTE
This product has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This product generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television reception,
which can be determined by turning the product OFF and ON, the user
is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the product into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the local retailer authorized to distribute this type of product or
an experienced radio/TV technician for help.
For Canadian customers:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
ESPAÑOL
n NOTES ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO
WARNINGS
AVERTISSEMENTS
ADVERTENCIAS
• Avoid high temperatures.
Allow for sufficient heat dispersion when
installed in a rack.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Keep the unit free from moisture, water, and
dust.
• Unplug the power cord when not using the unit
for long periods of time.
• Do not obstruct the ventilation holes.
• Do not let foreign objects into the unit.
• Do not let insecticides, benzene, and thinner
come in contact with the unit.
• Never disassemble or modify the unit in any way.
• Ventilation should not be impeded by covering
the ventilation openings with items, such as
newspapers, tablecloths or curtains.
• Naked flame sources such as lighted candles
should not be placed on the unit.
• Observe and follow local regulations regarding
battery disposal.
• Do not expose the unit to dripping or splashing
fluids.
• Do not place objects filled with liquids, such as
vases, on the unit.
• Do not handle the mains cord with wet hands.
• When the switch is in the OFF position, the
equipment is not completely switched off from
MAINS.
• The equipment shall be installed near the
power supply so that the power supply is easily
accessible.
• Eviter des températures élevées.
Tenir compte d’une dispersion de chaleur
suffisante lors de l’installation sur une étagère.
• Manipuler le cordon d’alimentation avec
précaution.
Tenir la prise lors du débranchement du cordon.
• Protéger l’appareil contre l’humidité, l’eau et la
poussière.
• Débrancher le cordon d’alimentation lorsque
l’appareil n’est pas utilisé pendant de longues
périodes.
• Ne pas obstruer les trous d’aération.
• Ne pas laisser des objets étrangers dans
l’appareil.
• Ne pas mettre en contact des insecticides, du
benzène et un diluant avec l’appareil.
• Ne jamais démonter ou modifier l’appareil d’une
manière ou d’une autre.
• Ne pas recouvrir les orifices de ventilation avec
des objets tels que des journaux, nappes ou
rideaux. Cela entraverait la ventilation.
• Ne jamais placer de flamme nue sur l’appareil,
notamment des bougies allumées.
• Veillez à respecter les lois en vigueur lorsque
vous jetez les piles usagées.
• L’appareil ne doit pas être exposé à l’eau ou à
l’humidité.
• Ne pas poser d’objet contenant du liquide, par
exemple un vase, sur l’appareil.
• Ne pas manipuler le cordon d’alimentation avec
les mains mouillées.
• Lorsque l’interrupteur est sur la position OFF,
l’appareil n’est pas complètement déconnecté du
SECTEUR (MAINS).
• L’appareil sera installé près de la source
d’alimentation, de sorte que cette dernière soit
facilement accessible.
• Evite altas temperaturas.
Permite la suficiente dispersión del calor cuando
está instalado en la consola.
• Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el
cordón de energía.
• Mantenga el equipo libre de humedad, agua y
polvo.
• Desconecte el cordón de energía cuando no
utilice el equipo por mucho tiempo.
• No obstruya los orificios de ventilación.
• No deje objetos extraños dentro del equipo.
• No permita el contacto de insecticidas, gasolina
y diluyentes con el equipo.
• Nunca desarme o modifique el equipo de
ninguna manera.
• La ventilación no debe quedar obstruida por
haberse cubierto las aperturas con objetos como
periódicos, manteles o cortinas.
• No deberán colocarse sobre el aparato fuentes
inflamables sin protección, como velas
encendidas.
• A la hora de deshacerse de las pilas, respete la
normativa para el cuidado del medio ambiente.
• No exponer el aparato al goteo o salpicaduras
cuando se utilice.
• No colocar sobre el aparato objetos llenos de
líquido, como jarros.
• No maneje el cable de alimentación con las
manos mojadas.
• Cuando el interruptor está en la posición OFF, el
equipo no está completamente desconectado de
la alimentación MAINS.
• El equipo se instalará cerca de la fuente de
alimentación de manera que resulte fácil acceder
a ella.
Downloaded From Disc-Player.com Marantz Manuals
FRANÇAIS
ENGLISH
n CAUTIONS ON INSTALLATION
PRÉCAUTIONS D’INSTALLATION
EMPLAZAMIENTO DE LA INSTALACIÓN
z
z
z
z
Wall
Paroi
Pared
zFor proper heat dispersal, do not install this unit in a confined
space, such as a bookcase or similar enclosure.
• More than 0.1 m (4 in.) is recommended.
• Do not place any other equipment on this unit.
zPour permettre la dissipation de chaleur requise, n’installez
pas cette unité dans un espace confiné tel qu’une bibliothèque
ou un endroit similaire.
• Une distance de plus de 0,1 m (4 po) est recommandée.
• Ne placez aucun matériel sur cet appareil.
zPara la dispersión del calor adecuadamente, no instale este
equipo en un lugar confinado tal como una librería o unidad
similar.
• Se recomienda dejar más de 0,1 m (4 pulg.) alrededor.
• No coloque ningún otro equipo sobre la unidad.
II
ENGLISH
Getting started
Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading the manual, be sure to keep it for future reference.
Check that the following parts are supplied with the product.
Contents
Getting started ·······································································1
Advanced connections······················································12
Accessories ····················································································1
About this manual ········································································1
Main features ·················································································2
Cautions on handling ····································································3
Discs ·······························································································3
Discs playable on this unit ····························································3
Holding discs ················································································3
Loading discs ················································································3
Cautions on loading discs ·····························································3
Cautions on handling ····································································4
Cautions on storing discs······························································4
Cleaning discs ···············································································4
About the remote control·····························································4
Inserting the batteries···································································4
Operating range of the remote control ·········································4
Part names and functions·····························································5
Front panel ····················································································5
Display ··························································································5
Rear panel ·····················································································6
Remote control ·············································································6
Preparations ················································································12
Connecting cables ······································································12
Digital connections ·····································································12
Remote control connection ························································12
Basic connections··································································7
Preparations ··················································································7
Connecting cables ········································································7
Analog connections ······································································7
Connecting the power cord··························································7
Basic operation ·······································································8
Before use ······················································································8
Turning the power on ···································································8
Turning the power standby ···························································8
Playback CDs ·················································································8
Turning off display ········································································9
To change time display ································································9
Displaying text ··············································································9
Listening with headphone ·························································10
Playing repeatedly (Repeat Playback) ·······································10
Repeat Playback Between Specified Points (A-B Repeat) ·······10
Playing in random order (Random playback) ···························11
Searching for a specific track (AMS play) ·································11
1
Downloaded From Disc-Player.com Marantz Manuals
Accessories
q
w
e
r
t
y
User guide ............................................................................... 1
AC power cord (Cord length: Approx. 4.9 ft / 1.5 m) ............... 1
Audio connecting cable (Cord length: Approx. 3.3 ft / 1.0 m) .. 1
Remote control connecting cable ............................................ 1
Remote controller (RC002CD) ................................................. 1
AAA-size batteries ................................................................... 2
w
e
Advanced operations·························································13
Playing tracks in a specific order
(Program playback) ·····································································13
Playback with unwanted tracks skipped (Delete program
playback) ······················································································13
Playing back at different speeds (Pitch control function) ·······14
Setting higher quality sound (Audio EX function) ···················14
Performing menu settings··························································14
Peak (Peak level search) ·····························································15
Edit (Edit mode) ··········································································15
MP3/WMA Mode (File playback mode setting) ··························16
Digital Out (Digital audio output setting) ·····································16
Quick Replay (Quick replay playback) ·········································16
Auto Standby (Auto standby mode) ············································16
Playback of MP3 and WMA files ················································17
Playing MP3 and WMA files ·······················································18
Explanation of terms ·························································20
Others ···························································································20
t
r
About this manual
n Operation buttons
The operations described in this manual are based mainly on
remote control operation.
n Symbols
Troubleshooting···································································21
v
This symbol indicates a supplementary information
and tips for operations.
Specifications ········································································22
Index ··························································································22
This symbol indicates a reference page on which
related information is described.
NOTE
This symbol indicates points to remember operations
or function limitations.
n Illustrations
Note that the illustrations in these instructions are for explanation
purposes and may differ from the actual unit.
ENGLISH
Getting started
Main features
Pitch control function (Audio CDs only)
The unit uses an HDAM®SA2, whose quality has been proved in
Super Audio CD players and high-end amplifiers, as a high-speed
buffer amplifier.
You can enjoy the high speed and high-quality sound like that
produced by high-end equipment.
The “pitch control” function enables the play speed (pitch) to be
varied over a ±12 step (vpage 14).
By a single-action operation, the “quick replay” function enables
play to be moved back from the current play position for the time
equivalent to the setting (setting range: 5 to 60 seconds) and play
to be resumed.
This function makes it possible to return to a part of the track that
was just played so it can be heard again (vpage 16).
Advanced connections
The unit adopts CS4392 corresponding to Cirrus Logic 192 kHz/24
bit in a D/A converter, which is the important element for deciding
sound quality, the same with the highly reputed Marantz Super
Audio CD player. The Cirrus Logic converter is a high quality device
that supports DVD-Audio content.
(This model is only suitable for reproduction of Audio CDs or MP3/
WMA files)
Quick replay function (Audio CDs only)
Basic operation
Incorporates a Cirrus Logic advanced D/A
converter, CS4392
Basic connections
Using Marantz original HDAM®SA2
Supports CD-Text display
CD-Text is an extension to the existing audio CD standard that
enables text information, such as the name of the artist, album title
and song titles to be stored on an audio CD.
CDs with the following logos support this function.
Audio EX mode, which allows setting of pitch control, digital
output, and display function to OFF, is provided in order for you to
enjoy higher quality sound (vpage 14).
Text information is recorded on the parts that are not used in the
conventional Audio CDs.
This CD player enables the text information stored on a CD-Text
CD to be read (applies only to English alphanumeric text).
Explanation of terms
High grade headphone circuit
Advanced operations
Audio EX function
The high-grade headphone circuit incorporates a high-speed buffer
amplifier to enable headphone listening of high quality sound
reproduction, late at night or in other such situations.
Troubleshooting
Supports MP3 and WMA file playback
MP3 and WMA files that have been recorded onto CD-R or CD-RW
discs can be played back on this CD player (vpage 17).
Specifications
Index
Downloaded From Disc-Player.com Marantz Manuals
2
ENGLISH
Cautions on handling
• Before turning the power switch on
Check once again that all connections are correct and that there are
no problems with the connection cables.
• When leaving home for long periods of time, be sure to unplug the
power cord from the power outlet.
• Proper ventilation
If the unit is left in a room full of the smoke from cigarettes, etc., for
long periods of time, the surface of the optical pickup may get dirty,
preventing it from receiving the signals properly.
• About condensation
If there is a major difference in temperature between the inside of
the unit and its surroundings, condensation may form on parts inside
the unit, causing the unit to fail to operate properly.
If this happens, let the unit sit for an hour or two with the power off
and wait until there is little difference in temperature before using
the unit.
• Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that
occurs, move the mobile phone away from the unit when it is in use.
• Moving the unit
Turn off the power and unplug the power cord from the power outlet.
Next, disconnect the cables connected to other system units before
moving the unit.
Discs
Discs playable on this unit
Loading discs
q Music CDs
• Place the disc in the tray, label side up.
• Make sure the disc tray is fully open when inserting the disc.
• Place the discs flat, 12 cm discs in the outer tray guide (Figure 1), 8
cm discs in the inner tray guide (Figure 2).
Discs marked with the logo at right can be played in
this unit.
w CD-R/CD-RW
Figure 1
Figure 2
NOTE
• Discs in special shapes (heartshaped discs, octagonal discs,
etc.) cannot be played. Do not
attempt to play them, as doing
so can damage the unit.
• Some discs and some recording formats cannot be played.
• Non-finalized discs cannot be played.
b What is finalization?
Finalization is the process that makes recorded CD-R/CD-RW discs
playable on compatible players.
Outer tray guide
Inner tray guide
12 cm disc
8 cm disc
• Place 8 cm discs in the inner tray guide without using an adapter.
NOTE
Holding discs
Do not touch the signal surface.
• If you place a DVD or other disc that cannot be played by this unit in
the disc tray, the tray does not open/close for about 1 minute. When
that happens, press 5 after “Error” is displayed.
• If you place a disc that contains other than MP3 or WMA files, “No
File” is displayed.
Cautions on loading discs
• Only load one disc at a time. Loading two or more discs can damage
the unit or scratch the discs.
• Do not use cracked or warped discs or discs that have been repaired
with adhesive, etc.
• Do not use discs on which the sticky part of cellophane tape or labels
is exposed or on which there are traces of where labels have been
removed. Such discs can get caught inside the player and damage it.
3
Downloaded From Disc-Player.com Marantz Manuals
ENGLISH
Cautions on handling
About the remote control
Inserting the batteries
Operating range of the remote control
q Remove the rear cover of the w Set two R03/AAA batteries in
remote control.
the battery compartment in
the indicated direction.
Operate the remote control while pointing it at the remote sensor.
Basic connections
Basic operation
• Do not get fingerprints, oil or dirt on discs.
• Take special care not to scratch discs when removing them from
their cases.
• Do not bend or heat discs.
• Do not enlarge the hole in the center.
• Do not write on the labeled (printed) surface with ball-point pens,
pencils, etc., or stick new labels on discs.
• Water droplets may form on discs if they are moved suddenly from
a cold place (outdoors for example) to a warm place, but do not try to
dry them off using a hairdryer, etc.
Getting started
Discs
Approx. 16.4 ft / 5 m
Cautions on storing discs
• If there are fingerprints or dirt on a disc, wipe them off before using
the disc. Fingerprints and dirt can impair sound quality and cause
interruptions in playback.
• Use a commercially available disc cleaning set or a soft cloth to clean
discs.
e Put the rear cover back on.
60°
NOTE
NOTE
The unit may function improperly or the remote control may not
operate if the remote control sensor is exposed to direct sunlight or
strong artificial light from a fluorescent or infrared light.
Troubleshooting
• Replace the batteries with new ones if the unit does not operate
even when the remote control is operated close to the unit.
• The supplied batteries are only for verifying operation.
• Insert the batteries in the proper direction, following the “q” and
“w” marks in the battery compartment.
• To prevent damage or leakage of battery fluid:
• Do not use a new battery with an old one.
• Do not use two different types of batteries.
• Do not attempt to charge dry batteries.
• Do not short-circuit, disassemble, heat or dispose of batteries in
a fire.
• Do not keep the battery in a place exposed to direct sunlight or in
places with extremely high temperatures, such as near a heater.
• If the battery fluid leaks, carefully wipe the fluid off the inside of the
battery compartment and insert new batteries.
• Remove the batteries from the remote control if it will not be used
for a long time.
• Dispose of batteries in accordance with local regulations on battery
disposal.
Explanation of terms
Do not wipe in a circular motion.
Specifications
Gently wipe the disc from the
inside towards the outside.
60°
Advanced operations
Cleaning discs
Advanced connections
• Be sure to remove discs after using them.
• Be sure to store discs in their cases to protect them from dust,
scratches, warping, etc.
• Do not store discs in the following places:
1. Places exposed to direct sunlight for long periods of time
2. Dusty or humid places
3. Places exposed to heat from heaters, etc.
NOTE
Do not use record spray, antistatic agents, benzene, thinner or other
solvents.
Index
Downloaded From Disc-Player.com Marantz Manuals
4
ENGLISH
Part names and functions
For buttons not explained here, see the page indicated in parentheses ( ).
Front panel
q w
Display
e rt y u
Q5
Q4
q Power operation switch
i o Q0
Q3
Q2
(ON/STANDBY) ············································ (8)
····································································· (10)
w Power indicator (STANDBY) ······················· (8)
Q2 Headphones jack (PHONES) ······················ (10)
Q3 Remote control sensor ································ (4)
Q4 MP3/WMA Indicator ·································· (18)
Q5 DISPLAY OFF indicator ································ (9)
The two-colored light indicates the CD player
operating status as follows:
• Power “ON” ........................................Turn off
• Standby ......................................................Red
e Disc tray open/close button (5)·················· (8)
r Fast forwarding/Forward-skip button
(7, 9) ····················································· (8)
t Fast reversing/Reverse-skip button
(8, 6) ····················································· (8)
y Disc tray ······················································· (8)
u Display ··························································· (5)
i Play button (1) ············································· (8)
o Stop button (2) ············································ (8)
Q0 Pause button (3) ·········································· (8)
r
t
y
u
i oQ0 Q1
Q2
Q3
Q4
Q5
DISC
TTL
RNDM
TRK
PROG
A– B
EDIT
PEAK
TTL
TIME
TEXT
1 2
3 4
5 6
7 8
9 10 11 12 13 14 15 16 17 18 19 20
Q8 Q7
Q1
Q1 Headphone volume control knob (LEVEL)
q w e
q Pause indicator (3)
This lights when play is temporarily suspended.
w Play indicator (1)
This lights during play.
e Disc indicator (DISC)
This flashes during readout of the table of
contents (TOC) information on the disc.
r
Total track indicator (TTL)
Lights up when the total number of tracks
recorded in the CD is displayed.
t Random indicator (RNDM)
This lights during random play.
y Track indicator (TRK)
Lights up when the track number of a track
being played back is displayed.
u Program indicator (PROG)
This lights during program play.
i A-B repeat indicator (A-B)
This lights during A-B repeat play.
o Repeat indicator (RPT)
This lights during repeat play.
Q0 1-track repeat indicator (1)
This lights during 1-track repeat play.
Q1 Pitch control indicator (PITCH)
Lights up when the pitch control function is set
and active.
5
Downloaded From Disc-Player.com Marantz Manuals
RPT 1 PITCH
Q6
Q2 Edit indicator (EDIT)
This lights during edit mode.
Q3 Peak indicator (PEAK)
This lights during peak search and playback of
the peak.
Q4 Total time indicator (TTL)
Lights up when the total remaining time or total
program time is displayed.
Q5 Time indicator (TIME)
This lights while the elapsed time or other such
time is displayed.
Q6 Music calendar (1 - 20,
)
This displays the track numbers recorded on
the disc, the track numbers still to be played,
and the track numbers programmed for
program play. (Audio CD only)
Q7 Information display
This displays the time information and text
information of the disc played, the setting
menus, etc.
Q8 Text indicator (TEXT)
This lights when a disc supporting CD-TEXT has
been loaded.
ENGLISH
Rear panel
Remote control
w
r
q
w
e
r
t
y
t
q ANALOG OUT connectors ··························· (7)
w DIGITAL OUT COAXIAL connector ··········· (12)
e DIGITAL OUT OPTICAL connector ············ (12)
r REMOTE CONTROL IN /
OUT connectors············································ (12)
u
t EXTERNAL/INTERNAL switch ·················· (12)
y AC inlet (AC IN)············································· (7)
W0
o
Q0
Q2
W3
Volume button (d, f)
Input button (u, i)
MUTE button
Q3
Downloaded From Disc-Player.com Marantz Manuals
6
Index
NOTE
The remote control may not operate some devices.
Specifications
• The supplied remote control can operate Marantz
amplifiers.
• When using it, also refer to the operating
instructions of the other devices.
Troubleshooting
W1 Q. REPLAY button ······································ (16)
W2 Pause button (3) ·········································· (8)
W3 Stop button (2) ············································ (8)
Explanation of terms
Q1
W1
W2
Advanced operations
i
(–/RESET/+)
i REPEAT button ······································ (10,18)
o Play button (1) ············································· (8)
Q0 Track skip buttons (8, 9) ················ (8, 9)
Q1 Search buttons (6, 7) ······················· (8, 9)
Q2 Number buttons (0 – 9) ································ (9)
Q3 MENU, ENTER button ································ (14)
Q4 A-B repeat button (A-B) ······················· (10, 18)
Q5 CANCEL button ·········································· (13)
Q6 RANDOM button ·································· (11, 19)
Q7 SCROLL/RECALL button···························· (13)
Q8 TEXT button············································ (9, 18)
Q9 TIME button ·················································· (9)
W0 Amplifier operation buttons
Advanced connections
y
Q4
Q5
Q6
Q7
Q8
Q9
Basic operation
e
Basic connections
q
q POWER button·············································· (8)
w OPEN/CLOSE button (5) ····························· (8)
e SOUND MODE button ······························· (14)
r Auto music scan button (AMS) ··········· (11, 19)
t PROGRAM button ······································ (13)
y DISPLAY button············································ (9)
u Pitch control down/reset/up buttons ······ (14)
Getting started
Part names and functions
Model : CD5004
CD player
User Guide
Addendum Sheet
ENGLISH
FRANÇAIS
(page 6)
ESPAÑOL
(page 6)
Part names and functions
Rear panel
(página 6)
Nomenclature des pièces et des fonctions
Panneau arrière
u
Nombres y funciones de las piezas
Panel trasero
u
u
uFlasher input connector
uConnecteur d’entrée lumière clignotante
uConector de entrada del destellador
(page 12)
Advanced connections
(page 12)
Connexions avancées
(página 12)
Conexiones avanzadas
Flasher input connector
•This is used to control this unit using a keypad from another room.
Set this switch to “EXT.”
•If a flasher input connector is to be used, do not use the remote
control input connector.
Downloaded From Disc-Player.com Marantz Manuals
Connecteur d’entrée lumière clignotante
•Utilisé pour contrôler cet appareil à partir d’une télécommande
située dans une autre pièce. Réglez le commutateur sur “EXT.”
•Si un connecteur d’entrée lumière clignotante doit être utilisé,
n’utilisez pas le connecteur d’entrée télécommande.
Conector de entrada del destellador
•Se utiliza para controlar esta unidad por medio de un teclado situado
en otra habitación. Ajuste este interruptor a la posición “EXT”.
•Si se utiliza un conector de entrada de destellador, no utilice el
conector de entrada del control remoto.
ENGLISH
Basic connections
NOTE
Analog connections
Connecting the power cord
Amplifier
AUDIO
Do not plug in the power cord until all connections have been
completed.
AUDIO
IN
L
R
L
To household power outlet
(AC 120 V, 60 Hz)
R
Power cord
(supplied)
L
• Do not plug in the power cord until all connections have been
completed.
• When making connections, also refer to the owner’s manual of the
other components.
• Insert the plugs securely. Loose connections will result in the
generation of noise.
• Be sure to connect the left and right channels properly (left with
left, right with right).
• Do not bundle power cords together with connection cables.
Doing so can result in humming or noise.
• Do not connect the unit to the PHONO input connectors on the
amplifier.
R
Preparations
Connecting cables
NOTE
Select the cables according to the equipment being connected.
Audio cables
Analog connections (stereo)
(White)
L
L
(Red)
R
R
Audio cable (supplied)
7
Downloaded From Disc-Player.com Marantz Manuals
• Insert the plugs securely. Loose connections will result in the
generation of noise.
• Do not unplug the power cord while the unit is operating.
• Do not use a power cord other than the cord supplied with this unit.
ENGLISH
Getting started
Basic operation
Symbols used to indicate buttons in this manual
Power
indicator
1 2
Disc tray
Turning the power on
Press <ON/STANDBY> or [POWER].
Power is turned on and the power indicator goes off.
Turning the power standby
Press <ON/STANDBY> or [POWER].
<7 / 9>
Before setting power to standby, make sure the disc tray is completely
closed.
NOTE
<ON/STANDBY>
Stopping Playback
Press 2.
[POWER]
Fast-Forwarding and Fast-Reversing (Searching)
GUsing the buttons on the main unitH
During playback, press and hold in <8/6> or <7/9>.
• When you remove your finger from the button, normal playback is
resumed.
• When normal playback is resumed after searching, the sound may
be interrupted momentarily.
GUsing the buttons on the remote controlH
During playback, press and hold in [6] or [7].
• When you remove your finger from the button, normal playback is
resumed.
• When normal playback is resumed after searching, the sound may
be interrupted momentarily.
Specifications
[8, 9]
2
[6, 7]
• Do not force the tray in by hand while power is set to standby. This
could cause a trouble.
• Even when power is set to standby, electrical current passes through
some circuits. If you do not intend to use the unit for an extended
period of time, unplug the power cord from the household power
outlet.
Press 3.
• The “3” indicator lights.
• To restart playback, press 1 or 3.
Troubleshooting
1
• After playing all tracks recorded on the disc, the unit automatically
stops playback.
Explanation of terms
3
The “1” indicator lights and the disc is played back.
Stopping Playback temporarily
3
5
2 Press 1.
Advanced operations
<8 / 6>
• To open or close the disc tray, press 5.
• You can close the disc tray by pressing 1.
Advanced connections
Power is set to standby and the power indicator lights.
1 Insert a disc.
Basic operation
5
BUTTON
<BUTTON>
[BUTTON]
Playback CDs
Basic connections
Button located on both the main unit and
the remote control
Button only on the main unit
Button only on the remote control
Before use
Index
Downloaded From Disc-Player.com Marantz Manuals
8
ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and
the remote control
Button only on the main unit
Button only on the remote control
BUTTON
<BUTTON>
[BUTTON]
1
Playback CDs
Moving to the Beginning of Tracks (Skipping)
GUsing the buttons on the main unitH
During playback, press and hold in <8/6> or <7/9>.
• The disc is skipped the number of tracks equal to the number of
times the button is pressed.
• When you press <8/6> once, playback restarts from the
beginning of the current track.
GUsing the buttons on the remote controlH
During playback, press and hold in [8] or [9].
• The disc is skipped the number of tracks equal to the number of
times the button is pressed.
• When you press [8] once, playback restarts from the beginning
of the current track.
DISPLAY OFF
indicator
<LEVEL>
[A-B]
[TEXT]
[DISPLAY]
Playing a Specific Track (Direct searching)
Press [NUMBER] (0 – 9) to select the track.
GExampleH : Track 4 : Press number [4] to select Track No. 4.
GExampleH : Track 12 : Press numbers [1] and [2] consecutively to
select Track No. 12.
[TIME]
The number you enter is set about 1.5 seconds after you press the
number buttons. To enter a two-digit number, be sure to press the
two number buttons, one immediately after the other.
Turning off display
Press [DISPLAY].
[REPEAT]
1
[NUMBER]
(0 – 9)
9
Downloaded From Disc-Player.com Marantz Manuals
[8, 9]
The DISPLAY OFF indicator lights and the display information goes
off.
NOTE
During stop mode, the display information does not turn off. The
information is turned off only during playback.
To change time display
Press [TIME].
• When [TIME] is pressed each time, the display shows differently
in the following orders.
Track elapsed time
Track remaining time
Total remaining time
Displaying text
The “TEXT” indicator lights when a CD-Text disc is loaded.
• When you press [TEXT], the text information stored on a CD-Text
disc is displayed.
• This unit can display up to 64 characters of text information.
GDisplay of playerH
Text information
ENGLISH
n During stop mode
When [TEXT] is pressed each time, the display switches text
information in the following order.
GExampleH While the third track is being played back
When [TEXT] is pressed each time, the display switches text
information in the following order.
If you press 1 while the title of a track is displayed, playback starts
from the beginning of the current track.
Title of track 3 now playing
Playing repeatedly (Repeat Playback)
Press [REPEAT] to select repeat mode.
When [REPEAT] is pressed each time, the display switches repeat
modes in the following order.
All-track repeat
1-track repeat
“RPT”
“RPT1”
Time display
Repeat off
Basic operation
(Not Displayed)
Album Title (album title)
Album Title
Album Artist (album artist)
GSelectable itemsH
All-track repeat “RPT”
: All tracks are played repeatedly.
1-track repeat “RPT1”
: Only 1 track is played repeatedly.
Repeat off
(Not Displayed)
Advanced connections
3 Title (title of track 3)
: Normal playback resumes.
3 Artist (artist of track 3)
1 Title (title of track 1)
2 Title (title of track 2)
Repeat Playback Between
Specified Points (A-B Repeat)
playback, press [A-B] at the desired starting
1 During
point (A).
The “A-” indicator on the display lights.
3 Arranger (arranger of track 3)
2 Press the [A-B] again at the desired ending point (B).
• To stop A-B repeat playback and resume normal playback, press
[A-B] again. The “A-B” indicator goes off.
You cannot use the A-B repeat playback function during random
playback.
Troubleshooting
X Title (title of the last track)
Explanation of terms
3 Composer
(composer of track 3)
The “B-” indicator on the display lights and the selected part
(from point A to point B) is played repeatedly.
Listening with headphone
Time display
Specifications
The type of text information stored in a CD-Text disc varies depending
on the disc. No text information is displayed for the disc that does not
contain information.
Plug the headphones into the headphone jack (PHONES).
Adjusting the Volume
Turn <LEVEL>.
NOTE
Index
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
Downloaded From Disc-Player.com Marantz Manuals
Advanced operations
3 Songwriter
(songwriter of track 3)
Basic connections
n During playback mode
Getting started
Displaying text
10
ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and
the remote control
Button only on the main unit
Button only on the remote control
BUTTON
<BUTTON>
[BUTTON]
1
2
Playing in random order
(Random playback)
During playback or stop mode, press [RANDOM].
The “RNDM” indicator on the display lights and random playback
starts.
Stopping Random Playback
Press 2 or [RANDOM] during random playback.
The “RNDM” indicator on the display goes off.
Searching for a specific track
(AMS play)
You can play back all track intros, from the first track onward, in
sequence. This function is useful when you search for a specific track
you want to listen to. (AMS playback: Auto Music Scan playback)
1 During playback or stop mode, press [AMS].
The Play indicator “1” on the display flashes and AMS playback
starts.
CD PLAYER CD5004
MP3/WMA
STANDBY
DISPLAY
OFF
ON/STANDBY
PHONES
LEVEL
If you press [REPEAT] during random playback, playback is performed
using the 1-track repeat or all-track repeat mode.
• All-track repeat: After the current session of random playback ends,
another session is started using a different order
for the tracks. This operation is repeated until you
cancel the all-track repeat mode.
• 1-track repeat: The current track is played repeatedly.
NOTE
[AMS]
• Direct searching is not possible during random playback.
• The random playback mode is canceled if you set power to standby,
turn off power, or open the disc tray.
[RANDOM]
[REPEAT]
1
2
11
Downloaded From Disc-Player.com Marantz Manuals
2 Press [AMS] to set the playback time.
• When [AMS] is pressed each time, the display switches AMS
playback time in the following order.
10 sec.
20 sec.
30 sec.
OFF
you find the track you want to listen to, press
3 When
1.
The Play indicator “1” lights and normal playback is resumed.
• If you press [RANDOM] during AMS playback, the AMS playback
mode is canceled and random playback starts.
ENGLISH
Getting started
Advanced connections
Digital connections
Remote control connection
CD recorder /
MD recorder
Connecting cables
Select the cables according to the equipment being connected.
AUDIO
OPTICAL
IN
Audio cables
COAXIAL
IN
n Connection
n Setting
Optical cable (sold separately)
Coaxial digital cable (sold separately)
To use this unit without connecting it to the amplifier, set the remote
control switch to “INTERNAL”.
The unit
Remote connector cord (supplied)
Advanced operations
When connecting the optical digital output connector
with an optical transmission cable (sold separately)
Advanced connections
Set the remote control switch on the rear panel of this unit to
“EXTERNAL” to use this feature.
• This setting will disable remote sensor reception of this unit.
• To operate the unit, point the remote control at the remote
sensor of the amplifier.
Coaxial digital connections
Basic operation
Use the supplied remote connection cable to connect the REMOTE
CONTROL IN terminal of this unit to REMOTE CONTROL OUT
terminal of the amplifier.
Optical digital connections
Remote control connection
When you use this unit connected to a Marantz amplifier, this unit
receives operation signals sent from the amplifier and operates
accordingly.
Basic connections
Preparations
Explanation of terms
Match the shapes then insert firmly.
Troubleshooting
Set to “EXTERNAL.”
Remote connector cord (supplied)
Specifications
Signal flow
Amplifier
Index
Downloaded From Disc-Player.com Marantz Manuals
12
ENGLISH
Advanced operations
Symbols used to indicate buttons in this manual
Button located on both the main unit and
the remote control
Button only on the main unit
Button only on the remote control
<7 / 9>
BUTTON
<BUTTON>
[BUTTON]
1
Playing tracks in a specific order
(Program playback)
1 During stop mode, press [PROGRAM].
• “Program” appears on the display and the program playback
mode starts.
• The “PROG” indicator flashes.
2
Use [NUMBER] (0 – 9) , [8, 9] or <8/6,
7/9> to select the tracks you want to program.
GExampleH
To program tracks 3 and 12 to be played in that order, press [3],
[1], and [2] one after the other.
<8 / 6>
3 2
3 Press 1.
Playback starts in the programmed order.
Checking the order of the programmed tracks
Press [SCROLL/RECALL].
• During program playback:
Displays the track numbers in the programmed order.
• During delete program playback:
Displays the deleted track numbers in the deleted order.
Adding tracks for program playback
During playback or stop, press [PROGRAM].
• When the “PROG” indicator flashes, select tracks that you want to
add for program playback.
Canceling a track from program playback
While stopped, press [SCROLL/RECALL].
Press [SCROLL/RECALL] to display the track that you want to delete
and press [CANCEL].
Clearing the all programmed track
During program playback, press 2 twice.
During stop mode, press 2 once.
The number you enter is set about 1.5 seconds after you press the
number buttons. To enter a two-digit number, be sure to press the
two number buttons, one immediately after the other.
[SOUND MODE]
[CANCEL]
[PROGRAM]
[DISPLAY]
[PITCH –, +]
[PITCH RESET]
[REPEAT]
3
1
[NUMBER]
(0 – 9)
[MENU]
13
Downloaded From Disc-Player.com Marantz Manuals
[SCROLL/RECALL]
Playback with unwanted tracks
skipped (Delete program playback)
pressing [PROGRAM] during stop mode, press
1 After
[CANCEL].
• “Delete Prog.” appears on the display and delete program
playback mode starts.
• “PROG” indicator flashes.
[8, 9]
2
Use [NUMBER] (0 – 9) , [8, 9] or <8/6,
2 7/9>
to select the tracks you want to skip.
GExampleH
To program tracks 3 and 12 to play in that order:
Press [3], [1] and [2].
[ENTER]
3 Press 1.
The selected tracks are skipped when the disc is played back.
The number you enter is set about 1.5 seconds after you press the
number buttons. To enter a two-digit number, be sure to press the
two number buttons, one immediately after the other.
• You can specify up to 30 tracks each for program playback and
delete program playback.
• If you press [REPEAT] during program playback or delete program
playback, programmed tracks are repeatedly played in the selected
repeat mode (1-track repeat or all-track repeat).
• During 1-track repeat: The current track is played repeatedly.
• During all-track repeat: After the current session of program playback
ends, the tracks are played repeatedly from the first programmed
track. This operation is repeated until you cancel the all-track repeat
mode.
NOTE
• Programmed playback is not possible with MP3 and WMA files.
• The program playback mode is canceled if you set power to standby,
turn off power, or open the disc tray.
ENGLISH
Increasing the play speed
Press [PITCH+].
• “PITCH” will light up and each time the button is pressed, the
playback speed will increase (max +12).
You can use the Audio EX function to set higher quality sound.
During stop mode, press [SOUND MODE].
• When [SOUND MODE] is pressed each time, the display switches
sound modes in the following order.
Audio EX 1
Audio EX OFF
Reducing the play speed
Audio EX 2
Returning play to the normal speed
NOTE
• The pitch control function is enabled only when Audio EX mode is
set to “Audio EX OFF” (vpage 14).
• Pitch control playback is not possible with MP3 and WMA files.
Audio EX OFF:
Digital
output
Display
Enable
Available *1
*2
On
Disable
Available *2
On
Not available
Off
(during
playback)
*3
Audio EX 1:
Plays with a higher
quality sound than
“Audio EX OFF” mode.
Audio EX 2:
Plays analog audio
output using highest
quality sound.
Disable
1 During stop mode, press [MENU].
2 Press 2 or 3 to select the menu item you want to set.
3 Press [ENTER].
Peak (vpage 15)
2
Edit (vpage 15)
2
3
MP3/WMA Mode (vpage 16)
2
3
3
2
Troubleshooting
(*1) Digital signals are output only when the pitch control setting is
“Pitch: 0”.
(*2) The “Digital Out” setting of the menu overrides the Audio EX
setting (vpage 16).
(*3) When you press [DISPLAY], the display turns on for about 3
seconds.
3
Explanation of terms
Pitch
control
Peak (Peak level search) (vpage 15)
Edit (Edit mode) (vpage 15)
MP3/WMA Mode (File playback mode setting) (vpage 16)
Digital Out (Digital audio output setting) (vpage 16)
Quick Replay (Quick replay playback) (vpage 16)
Auto Standby (Auto standby mode) (vpage 16)
Advanced operations
Press [PITCH RESET].
• The “PITCH” indicator on the display goes off and “Pitch: 0” appears
on the main display.
• Press [PITCH RESET] again to restore the original playback speed
setting.
Sound mode
n
n
n
n
n
n
Digital Out (vpage 16)
2
3
Specifications
Quick Replay (vpage 16)
2
3
Index
Auto Standby (vpage 16)
Downloaded From Disc-Player.com Marantz Manuals
Advanced connections
Press [PITCH–].
• “PITCH” will light up and each time the button is pressed, the
playback speed will decrease (min –12).
You can set the following functions. For further information, see the
page indicated in parentheses ( ).
Basic operation
The default setting
Performing menu settings
Basic connections
You can use the Pitch control function to play back music CDs (CD-DA)
at a different speed (pitch) during playback.
Setting higher quality sound (Audio
EX function)
Getting started
Playing back at different speeds
(Pitch control function)
14
ENGLISH
Performing menu settings
Symbols used to indicate buttons in this manual
Button located on both the main unit and
the remote control
Button only on the main unit
Button only on the remote control
<7 / 9>
5
BUTTON
<BUTTON>
[BUTTON]
1 2
CD PLAYER CD5004
MP3/WMA
STANDBY
DISPLAY
OFF
ON/STANDBY
PHONES
LEVEL
<8 / 6>
3
Peak (Peak level search)
Edit (Edit mode)
You can avoid distortion and noise in a recording if you adjust the
recording level of the cassette deck in relation to the peak volume
level on a disc. This unit can detect portions with relatively high
volume levels over the entire disc or programmed tracks.
When you record from CD to tape, you can use this function to
divide the tracks and record them on tape side A and tape side B in
accordance with the tape length. When recording, 4-second intervals
are inserted between the tracks.
• You can use the edit mode during program mode and delete program
mode.
1 Select “Peak” and press [ENTER].
• The “PEAK” indicator on the display lights and the peak level
search starts from the first track on a disc.
• When the peak level search of the last track is finished, a
6-second segment before and after portions with relatively
high volume level is played repeatedly.
• Adjust the recording level of the cassette deck during the
above 6-second repeated playback.
(For further information, refer to the user guide of the cassette
deck.)
On
<ON/STANDBY>
5
1 2
TRK
3 4
5 6
PEAK
Flashes
On
EDIT
7 8
Last track on tape side B
Last track on tape side A
Recording time of tape
9 10 11 12 13 14 15 16 17 18 19 20
2 Press 2 to stop playback of the peak location.
NOTE
[Q.REPLAY]
[8, 9]
2
[6, 7]
13 14
TIME
There are multiple locations on a disc where the volume level may be
high. Therefore, each time you perform the peak level search on the
same disc, different high peak levels may be detected.
[NUMBER]
(0~9)
[MENU]
(Example: Disc containing 28 tracks)
5 6
TEXT
1
• The “EDIT” indicator on the display lights and the tracks
stored on the disc are recorded on tape side A and tape side
B.
On
TTL
3
1 Select “Edit” and press [ENTER].
In this example, tracks 1 to 15 are recorded on tape side A
and tracks 16 to 28 are recorded on side B when a 90-minute
cassette tape is used.
2 Setting the recording time of a tape.
• When [8, 9] or <8/6, 7/9> is pressed
each time, the display switches the recording time setting to
46, 54, 60, 74, and 90 minutes.
• When [6, 7] or <8/6, 7/9> is pressed
each time, you can change the recording time in 1-minute
increments.
• You can also use the number buttons to enter the setting time
directly.
• [Example] To set 46 minutes, press [4] and [6].
NOTE
When “ ” is displayed on the right of the last track on tape side B,
tracks following the last track on tape side B are not played.
[ENTER]
Flashes
In this example, tracks after track 17 are not played.
15
Downloaded From Disc-Player.com Marantz Manuals
ENGLISH
3
Press [ENTER] to end the setting operation.
On
On
TEXT
1 2
TRK
3 4
5 6
A–
7 8
9 10
EDIT
11 12 13 14
TTL
TIME
15
NOTE
Setting the quick replay time
[8, 9] or <8/6,
2 Press
select the playback mode.
If a disc is set in the disc tray, remove the disc and then perform the
setting.
7/9> to
Cont. mode: All files on the disc are played.
Folder mode: All files in the selected folder are played.
• This unit can play MP3 and WMA files.
1 Select “Quick Replay” and press [ENTER].
The quick replay time current setting appears on the display.
3 Press [ENTER].
The setting is saved.
• The quick replay time is set to 10 seconds at the factory.
Digital Out (Digital audio output setting)
You can prevent analog audio circuits from being affected by digital
audio circuits by turning off the digital audio output. You can use
higher quality sound to play back analog sounds.
[8, 9] or <8/6, 7/9> to
2 Press
set the desired time (5 – 60 seconds).
3 Press [ENTER].
The setting is saved.
The current settings appear on the display.
Playback starts after about 4 seconds.
• When playback for recording tracks on side A ends, the recording
stops temporarily at the beginning of the first track to be recorded
on side B.
• Digital output is set to “On” at the factory.
With Auto Standby On, you can automatically set this unit to standby
mode after the unit is in stop mode continuously for about 30 minutes
(no operation).
The Auto Standby mode current setting appears on the display.
The setting is saved.
• Auto Standby mode is set to “OFF” at the factory.
Playback starts after about 4 seconds.
• ON: Enable Auto Standby mode.
• OFF: Disable Auto Standby mode.
Using the quick replay function
Downloaded From Disc-Player.com Marantz Manuals
3 Press [ENTER].
Index
You can perform edit recording during the program mode and delete
program mode.
When you press [Q.REPLAY] during playback, the play position will
jump back from the current position for length of time that was set
and playback is resumed.
Specifications
• When playback for recording tracks on side B ends, the recording
stops and the settings in the edit mode are canceled.
Troubleshooting
Off: Turns off digital audio output.
On: Turns on digital audio output.
Explanation of terms
you finish settings in the edit mode, set the
1 After
cassette deck to start recording.
Select “Digital Out” and press [ENTER].
1
Auto Standby (Auto standby mode)
2 Press 1 or 3 to play back the tracks on side A.
[8, 9] or <8/6, 7/9> to
2 Press
select “On” or “Off”.
1 Select “Auto Standby” and press [ENTER].
3 Change the cassette tape to side B and start recording. Press [ENTER].
3
4 Press 1 or 3 to play back the tracks on side B.
Press [8, 9] or <8/6, 7/9>to
2
make the desired setting.
Quick Replay (Quick replay playback)
Advanced operations
n Edit recording
• The default setting is “Cont. mode”.
Advanced connections
• During edit playback, you can operate only <2>, <5>, and <ON/
STANDBY> buttons on the main unit. (You cannot use the remote
control for operation.)
This prevents recording errors due to unintentional operation.
• During edit playback, no text information stored on a CD-Text disc
is displayed. Only the time is displayed.
• With Auto Standby On, you can automatically set this unit to
standby mode after the unit is in stop mode continuously for about
30 minutes, during setting in the Edit mode or edit playback.
1 Select “MP3/WMA Mode” and press [ENTER].
Basic operation
Total playing time of side A
All tracks to be played on tape side A
Total number of tracks on side A
You can select the playback mode for MP3/WMA files.
NOTE
• You cannot cross over from one track to another when you perform
the quick replay function.
• When you press [Q.REPLAY], if the total length of the track being
played or the track elapsed playing time is shorter than the time set
for quick replay, the play position will return to the beginning of the
track and playback is resumed.
Basic connections
TTL
MP3/WMA Mode (File playback mode
setting)
Getting started
Performing menu settings
The setting is saved.
16
ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and
the remote control
Button only on the main unit
Button only on the remote control
BUTTON
<BUTTON>
[BUTTON]
Playback of MP3 and WMA files
n Playback order of MP3/WMA files
• Example of MP3/WMA playback order
AAAA01.mp3
BBBB02.mp3
2
<7 / 9>
• Display while the player is stopped
Root directory
Album 01
Album 02
Number of files that can be played
Album 06
aaaa03.mp3
aaaa04.mp3
aaaa05.mp3
aaaa06.mp3
• The dotted lines with arrows indicate the playback order of
files and folders.
• If there are any MP3/WMA files located immediately below
the root directory, i.e. that are not in folders, they will be
played before the folder files.
• The playback order will depend on the folder names and
file names with the order of precedence being: numbers
alphabet upper case alphabet lower case.
• The files in Albums 05 and 06 are not played back because
they are not MP3/WMA files.
• It is possible that the playback order will be different
than that of the order displayed on a personal computer.
This order can also change according to the CD writing
software used.
yyyy.jpg
zzzz.doc
Album 03
<8 / 6>
3
Album 07
bbbb07.mp3
bbbb08.mp3
dddd11.wma
dddd12.wma
Album 04
Album 08
cccc09.mp3
cccc10.mp3
[A-B]
[TEXT]
[MENU]
17
Downloaded From Disc-Player.com Marantz Manuals
Album 05
Album 09
[PITCH –, +]
[REPEAT]
3
eeee13.mp3
eeee14.mp3
wwww.wav
xxxx.wav
[8, 9]
2
[6, 7]
[ENTER]
• Playback order
1 AAAA01.mp3
2 BBBB02.mp3
3 aaaa03.mp3
4 aaaa04.mp3
5 aaaa05.mp3
6 aaaa06.mp3
7 bbbb07.mp3
8 bbbb08.mp3
9 cccc09.mp3
Album 10
ffff15.mp3
10
11
12
13
14
15
16
17
cccc10.mp3
dddd11.wma
dddd12.wma
eeee13.mp3
eeee14.mp3
ffff15.mp3
gggg16.mp3
gggg17.mp3
gggg16.mp3
gggg17.mp3
ENGLISH
n Displaying text information
File Name (currently playing)
All-track repeat
“RPT”
Repeat off
(Not Displayed)
To Switch the Folder or File During Playback
GTo change a folderH
Use [PITCH –, +] to select a folder and press [ENTER].
GTo change a fileH
Use [8, 9] or <8/6, 7/9> to select a file.
When you use a CD-R/RW disc, this unit automatically sets the
playback order. For further information, refer to “Playback of MP3 and
WMA files” (vpage 17).
Folder repeat
“RPT” flashes
1-track repeat
“RPT1”
GSelectable itemsH
All-track repeat “RPT”
Folder repeat
“RPT” flashes
1-track repeat “RPT1”
Repeat off
(Not Displayed)
: All tracks are played repeatedly.
: Tracks in a folder are played repeatedly.
: Only 1 track is played repeatedly.
: Normal playback resumes.
Stopping Playback
Press 2.
Stopping Playback temporarily
Year (created)
Press 3.
The “3” is displayed.
• To restart playback, press 3 again.
Comment
The “A-” indicator on the display lights.
During playback, press and hold in [6, 7] or <8/6,
2 Press the [A-B] again at the desired ending point (B).
• When you remove your finger from the button, normal playback is
resumed.
• When normal playback is resumed after searching, the sound may
be interrupted momentarily.
• To stop A-B repeat playback and resume normal playback, press
[A-B] again. The “A-B” indicator goes off.
7/9>.
The “B-” indicator on the display lights and the selected part
(from point A to point B) is played repeatedly.
NOTE
Index
• When a CD is not playing, only the number of files on the
disc that can be played is displayed.
NOTE
Depending on the MP3 or WMA file being played, text information
may not be displayed.
Downloaded From Disc-Player.com Marantz Manuals
Specifications
• Only alphanumeric characters can be displayed.
• The type of text information recorded in a file can be different
depending on the method used to write a file and the CD writing
software. Unrecorded text information is not displayed.
• The A-B repeat play function cannot be used during random play.
• There are cases in which difficulties will be experienced, when
setting the B point, if the file’s bit rate is low.
Troubleshooting
Time Display
playback, press [A-B] at the desired starting
1 During
point (A).
Explanation of terms
Fast-Forwarding and Fast-Reversing (searching)
n Repeat Playback Between Specified Points (A-B
Repeat)
Advanced operations
Album Name
Advanced connections
Artist Name
1
Press [MENU] to select “MP3/WMA Mode”. Set
2 “Cont.
mode” or “Folder mode” (vpage 16).
Press [REPEAT] to select repeat mode.
• When [REPEAT] is pressed each time, the display switches
repeat modes in the following order.
Basic operation
Song Title
Set a CD-R/RW disc that contains MP3 or WMA
format music files in the disc tray (vpage 3).
n Playing repeatedly (Repeat playback)
Basic connections
When [TEXT] is pressed each time, the display switches text
information in the following order.
During playback, mainly information about the currently playing file
will be displayed.
Playing MP3 and WMA files
Getting started
Playback of MP3 and WMA files
18
ENGLISH
Playback of MP3 and WMA files
Symbols used to indicate buttons in this manual
Button located on both the main unit and
the remote control
Button only on the main unit
Button only on the remote control
n Playing in random order (Random playback)
BUTTON
<BUTTON>
[BUTTON]
During playback or stop mode, press [RANDOM].
The “RNDM” indicator on the display lights and random playback
starts.
Stopping Random Playback
1
2
Press 2 or [RANDOM] during random playback.
The “RNDM” indicator on the display goes off.
If you press [REPEAT] during random playback, playback is performed
using the 1-track repeat or all-track repeat mode.
• All-track repeat: After the current session of random playback
ends, another session is started using a different
order for the tracks. This operation is repeated until
you cancel the all-track repeat mode.
• 1-track repeat: The current track is played repeatedly.
NOTE
The random playback mode is canceled if you set power to standby,
turn off power, or open the disc tray.
[AMS]
[RANDOM]
n Searching for a specific track (AMS play)
You can play back all track intros, from the first track onward, in
sequence. This function is useful when you search for a specific track
you want to listen to. (AMS playback: Auto Music Scan playback)
1 During playback or stop mode, press [AMS].
The play indicator “1” on the display flashes and AMS playback
starts.
2 Press [AMS] to set the playback time.
• When [AMS] is pressed each time, the display switches AMS
playback time in the following order.
10 sec.
20 sec.
30 sec.
OFF
you find the track you want to listen to, press
3 When
1.
The Play indicator “1” lights and normal playback is resumed.
• If you press [RANDOM] during AMS playback, the AMS playback
mode is canceled and random playback starts.
NOTE
AMS playback allows you to play back the files set in the “MP3/WMA
Mode” menu (vpage 16).
[REPEAT]
1
19
Downloaded From Disc-Player.com Marantz Manuals
2
ENGLISH
Getting started
Explanation of terms
Downloaded From Disc-Player.com Marantz Manuals
Index
• Windows Media and the Windows are the registered trademark
and trademark of Microsoft Corporation in the United States and
other countries.
• Music that you have recorded that is subject to copyright laws is
for personal use only, and cannot be used otherwise without the
permission of the copyright holder.
Specifications
This CD player can be used to play CD-R or CD-RW discs on which
MP3 (MPEG Audio Layer-3) or WMA (Windows Media Audio)
format audio files have been recorded.
Support for MP3 ID3 tags enables display of ID3 information,
such as artist names, album titles, track titles and the like, if this
information has been recorded with the tracks.
Troubleshooting
n Playing MP3 or WMA files
Explanation of terms
• This unit can play back Audio CD format and CD-R/CD-RW discs
which contain MP3/WMA music data. However, some discs may
have problems such as unable to play, noise or sound distortion.
For details, please read the instruction manual provided with a
CD recorder.
• The CD-R and CD-RW discs should contain properly-recorded
TOC information so that they can be played back. In CD recorders,
the task of writing TOC information is referred to as finalizing the
disc. Discs that are not finalized cannot be properly recognized
as an Audio CD and played back by regular CD players and Super
Audio CD players. For details, please read the instruction manual
provided with a CD recorder.
*TOC stands for Table Of Contents and contains information such
as the total number of tracks and total playing time of the disc.
• This player can only be used to play Audio CD-DA format discs
or discs on which MP3 or WMA audio data have been recorded.
Do not attempt to play a disc containing other data, such as a
CD-ROM for PCs, on this unit.
• As the playback of a CD-RW disc necessitates partial change of
the player setup, it may take longer time for reading the TOC
information than when an Audio CD or CD-R disc is played.
Advanced operations
W
WMA (Windows Media Audio)
This is audio compression technology developed by Microsoft
Corporation.
WMA data can be encoded using Windows Media® Player Ver.7, 7.1,
Windows Media® Player for Windows® XP and Windows Media®
Player 9 Series.
To encode WMA files, only use applications authorized by Microsoft
Corporation. If you use an unauthorized application, the file may not
work properly.
This unit can play back the CD-RW (ReWritable) discs as well as
ordinary Audio CD and CD-R (Recordable) discs.
NOTE
• The sound file specification supported by this CD player is “MPEG-1
Audio Layer-3” (sampling frequency fs 32 kHz, 44.1 kHz, 48 kHz).
Other specifications, such as MPEG-2 Audio Layer-3, MPEG-2.5
Audio Layer-3, MP1 or MP2 are not supported.
• Generally the higher the bit rate, the higher the sound quality.
MP3 bit rates are between 32 - 320 kb/s and for WMA between 64
- 160 kb/s. It is recommended that MP3/WMA recordings with a bit
rate of at least 128 kb/s be used.
• Ensure that MP3/WMA files have the extension “.mp3” or “.wma.”
Files with other file extensions or without any extension at all cannot
be played on this player.
• Playlists are not supported.
• The maximum number of files supported on a single disc is 255 and
the maximum number of folders is also 255.
• File and folder names up to a length of 32 characters can be
displayed.
• This player supports MP3 ID3 tags.
• The text information, such as ID3 tag information and file names that
are displayed during playback of MP3s, support English alphanumeric
characters only.
• When playing variable bit rate files, it is possible that the playing time
may not be displayed accurately.
• When writing onto CD-R or CD-RW discs, please use either ISO9660
mode 1 or ISO9660 mode 2-disc format. Multi-session recording is
also supported enabling the playing of data that have been added
to a disc.
• MP3/WMA files that have been recorded by “packet writing” cannot
be played back.
• Depending on the condition of the recorded data, it may take some
time to read song information.
• In the case of an Enhanced or Mixed Mode CD having combined
audio format CD-DA along with MP3/WMA files, only the CD-DA
audio portion will be played.
• The playback of WMA DRM (Digital Rights Management) files is not
supported by this player.
Advanced connections
S
Sampling frequency
Sampling involves taking a reading of a sound wave (analog signal)
at regular intervals and expressing the height of the wave at each
reading in digitized format (producing a digital signal).
The number of readings taken in one second is called the “sampling
frequency”. The larger the value, the closer the reproduced sound is
to the original.
n Playing CD-R/CD-RW discs
Basic operation
M
MP3 (MPEG Audio Layer-3)
This is an internationally standardized audio data compression scheme,
using the “MPEG-1” video compression standard. It compresses the
data volume to about one eleventh its original size while maintaining
sound quality equivalent to a music CD.
Others
Basic connections
B
Bit rate
This expresses the read amount per 1 second of video/audio data
recorded in a disc.
20
ENGLISH
Troubleshooting
If a problem occurs, first check the following:
1. Are the connections correct?
2. Is the unit being operated as described in the owner’s manual?
If this unit does not operate properly, check the items listed in the table below. If the problem persist there
may be a malfunction.
In this case, disconnect the power immediately and contact the retail outlet.
Symptom
Cause
Countermeasure
• The power cable is not plugged • Plug the power cable into a
in.
household power outlet.
7
• Power of this unit is not turned • Turn on power to the unit.
on.
8
• The disc is not set correctly.
3
• Set the disc correctly.
• The disc is placed upside-down. • Set the disc correctly.
(The label of the disc is facing
The disc does not
down.)
rotate.
The disc rotates
but there is no
sound output.
The display does
not light during
playback.
21
Page
3
• The disc is dirty.
• Clean the recording surface of the
disc.
4
• The disc is scratched.
• A disc with many scratches may
not be playable.
–
• The disc is warped.
• A warped disc may not be
playable.
–
• The amplifier or speakers are • Connect the cables correctly.
not connected correctly.
(Refer to User Guide supplied
with the amplifier.)
–
• Power to the amplifier is not • Turn on power to the amplifier.
turned on.
(Refer to User Guide supplied
with the amplifier.)
–
• The function or input source • Set the function or input source
selector switch of the amplifier selector switch of the amplifier
is not set to “CD” or “AUX” to “CD” or “AUX” (amplifier
(amplifier terminal to which this terminal to which this unit is
unit is connected).
connected). (Refer to User Guide
supplied with the amplifier.)
–
• The amplifier volume is set to • Adjust the amplifier volume.
minimum.
(Refer to User Guide supplied
with the amplifier.)
–
• The Audio EX function
([SOUND MODE]) is set to
“Audio EX2”.
Downloaded From Disc-Player.com Marantz Manuals
• Set the Audio EX function
([SOUND MODE]) to “Audio EX
OFF” or “Audio EX1”.
14
Symptom
Cause
• The disc is dirty.
• The disc is scratched.
The disc stops
rotating.
• The disc is warped.
• The disc being played is not a
music CD. Or MP3/WMA files
are not recorded on the disc.
• The distance between the unit
and remote control is too great.
• There is some object between
the unit and remote control.
The remote
• The batteries in the remote
control does not
control are expended.
operate.
• The remote sensor of the unit is
exposed to strong light.
• The EXTERNAL/INTERNAL
switch of the unit is set to
“EXTERNAL”.
• The disc is placed upside-down.
(The label of the disc is facing
down.)
CD-R/CD-RW disc
• The recorded data is not written
cannot be played.
in an audio (CD-DA) format. Or
the MP3/WMA files are not
recorded correctly.
Pitch control
• The Audio EX function ([SOUND
operation cannot
MODE]) is not set to “Audio EX
be performed.
OFF”.
• The “Digital Out” setting is set
to “Off”.
• The Audio EX function ([SOUND
MODE]) is set to “Audio EX2”.
Digital audio
signals are not
output.
• The Audio EX function
([SOUND MODE]) is set to
“Audio EX OFF” and pitch
control is used.
Countermeasure
• Clean the recording surface of the
disc.
• A disc with many scratches may
not be playable.
• A warped disc may not be
playable.
• A CD-ROM meant for a personal
computer cannot be played.
• Use the remote control closer to
the unit, within operational range.
• Remove the object.
• Replace all batteries with new
batteries.
• Avoid exposing the remote
sensor to strong light.
• To use this unit without an
amplifier, set the remote control
switch to “INTERNAL”.
• Set the disc correctly.
Page
4
–
–
17
4
4
4
4
12
3
• Record data that is applicable to
this unit.
• Set the Audio EX function
([SOUND MODE]) to “Audio EX
OFF”.
• Set the “Digital Out” setting to
“On”.
• Set the Audio EX function
([SOUND MODE]) to “Audio
EX1”.
• Set the pitch control “Pitch: 0”.
• Or, set the Audio EX function
([SOUND MODE]) to “Audio
EX1”.
17
14
16
14
14
ENGLISH
Index
v Numerics
n Audio characteristics
2 channels
2 Hz to 20 kHz
100 dB
110 dB
110 dB (1 kHz)
0.002% (1 kHz)
Precision of quartz
2.25 V rms, stereo
18 mW/32 ohms (variable maximum)
0.5 Vp-p, 75 ohms
–19 dBm
1-track repeat ··············································· 10, 18
vA
A-B Repeat ··················································· 10, 18
All-track repeat ············································· 10, 18
AMS play ······················································ 11, 19
Analog connections ·············································· 7
Audio cable ··························································· 7
Auto standby mode ············································ 16
vB
Batteries ······························································· 4
• Laser:
• Wavelength:
AlGaAs semiconductor
780 nm
vC
n Signal system
• Sampling frequency:
• Quantization:
44.1 kHz
16-bit linear PCM
n Power supply
• N version:
• Power consumption:
• Standby power consumption:
AC 120 V 60 Hz
14 W
0.4 W
n Cabinet, etc.
1
2
1
1
1
vD
Delete program playback ··································· 13
Digital audio output setting ································ 16
Display ·································································· 5
vE
Edit ····································································· 15
EXTERNAL ························································· 12
12-15/16 (328.5)
13-3/8 (339.5)
vT
Text information ············································· 9, 18
vW
WMA ·································································· 18
vI
INTERNAL ·························································· 12
3/16
(4)
9/16
(14)
Searching ······················································· 8, 18
Skipping ································································ 9
Stopping playback ·········································· 8, 18
Index
3-5/8
(90.5)
4-1/8
(104.5)
17-3/8 (440)
Fast-forwarding ·············································· 8, 18
Fast-reversing ················································· 8, 18
File playback mode setting ································· 16
Finalise ································································· 3
Folder mode ······················································· 16
vS
Downloaded From Disc-Player.com Marantz Manuals
Specifications
5/16
(7)
For purposes of improvement, specifications and design are subject to change without notice.
vF
vR
Random playback ········································· 11, 19
Remote control ···················································· 6
Inserting the batteries ········································ 4
Remote control connection ································ 12
Repeat playback ··········································· 10, 18
Troubleshooting
17-3/8 inchs (440mm)
4-1/8 inchs (104.5mm)
13-3/8 inchs (339.5mm)
5.1kg
+5 to +35°C
5 to 90% (no condensation)
vQ
Quick replay playback ········································· 16
Explanation of terms
• Accessories
Remote controller:
AAA batteries:
AC power cord:
Audio connecting cord:
Remote control connecting cord:
• Maximum outer dimensions
Width:
Height:
Depth:
• Weight:
• Allowable operating temperature:
• Allowable operating humidity:
vP
Peak level search ··············································· 15
Pitch control function ········································· 14
Playback
Playback CDs ····················································· 8
Program playback ············································· 13
Random playback ········································11, 19
Repeat playback ··········································10, 18
Stopping playback ········································ 8, 18
Stopping playback temporarity····················· 8, 18
Power cord ··························································· 7
Program playback ··············································· 13
Advanced operations
CD-R/CD-RW ························································ 3
CD-Text ································································ 9
Coaxial digital cable ············································ 12
Connections
Analog connections ··········································· 7
Coaxial digital connections ······························ 12
Connecting cables ········································ 7, 12
Connecting the power cord ······························· 7
Digital connections ·········································· 12
Optical digital connections ······························· 12
Cont. mode ························································ 16
vO
Optical cable ······················································· 12
Advanced connections
n Optical readout system
vM
MP3 ···································································· 18
Music CDs ···························································· 3
Basic operation
Channels:
Frequency response:
Dynamic range:
Signal-to-noise ratio:
Channel separation:
Harmonic distortion:
Wow & flutter:
Audio output:
Headphone output:
Digital output
Coaxial output (pin jack):
Optical output (square optical connector):
Basic connections
•
•
•
•
•
•
•
•
•
•
Getting started
Specifications
22
Downloaded From Disc-Player.com Marantz Manuals
Downloaded From Disc-Player.com Marantz Manuals
Printed in China
Downloaded From Disc-Player.com Marantz Manuals
05/2010 541110510028M