OM8

Inside door preparation
For use with Sargent exit devices
1 17/32 in
39 mm
49/64 in
19 mm
in
G 3/8
10 mm
C See table
C
in
J 1/8
3 mm
Extreme Weatherized
Module (optional)
F
7 5/16 in
186 mm
6 11/16 in
170 mm
4 13/16 in
122 mm
1 11/32 in
34 mm
Horizontal
Centerline
1 19/32 in
40 mm
J
Vertical
Centerline
Vertical
Centerline
E
2 in
51 mm
H
3/4 in
19 mm
1 11/32 in
34 mm
E
15/16 in
24 mm
F
D ½13inmm
J
J
3 11/32 in
85 mm
1 in
25 mm
Align the Extreme Weatherized module template as close to
the exit device chassis as practical.
C
G
C
Instructions:
3 Plug all unused mounting holes as desired.
1 This template is for use on new construction, or doors that have previously
used the Sargent rim exit device series 12-8800 or 12-8888, using the STS
trim. The chassis must be a non-thumbpiece chassis.
4 Refer to Installation Instructions for Stanley Omnilock QAXOM Exit Device
Locks (T83325) for installation of the Omnilock Quick Adapter.
2 Revise the hole pattern on the door to the pattern on this template. If the
existing holes on the door are larger than on this template, they may be
used if they meet the exit device manufacturer’s specifications.
Hole
Diameter
Depth
A
15/32 in (12 mm)
1 9/16 in (40 mm)
Mounting posts
B
1 7/8 in (46 mm)
13/16 in (21 mm)
Bearing clearance hole
C
#10-24 tap
3/4 in (19 mm)
Chassis mount
D
1/2 in (13 mm)
Through door
Access hole
#10-24 tap
5/8 in (16 mm)
G
3/8 in (10 mm)
1 1/8 in (29 mm)
Mounting posts
H
3/4 in (13 mm)
J
1/8 in (3 mm)
Through ones ide
For Extreme Weatherized models
on hollow metal door only
K
3/4 in (13 mm)
E
F
Title
Installation Template for QAXOM
used with Sargent SA8 Exit Device
Series
QAXOM
Backset
----
Trim style
----
Door thickness
----
Additional Information
Left hand door
Right hand door
STANLEY OMNILOCK
Rev date
02/2010
To ensure accurate door preparation, use only factory-printed templates. Do not use copies or facsimiles.
Template
number
OM8
Rev
A
T83334/RevA Feb 2010
Outside door preparation
For use with Sargent exit devices
A 12 mm
15/32 in
in
K 3/4
19 mm
Vertical
Centerline
4 5/8 in
117 mm
7 5/16 in
186 mm
Horizontal
Centerline
1 19/32 in
40 mm
B 48 mm
1 7/8 in
3 21/32 in
93 mm
A
Hole
Diameter
Depth
A
15/32 in (12 mm)
1 9/16 in (40 mm)
Mounting posts
B
1 7/8 in (46 mm)
13/16 in (21 mm)
Bearing clearance hole
C
#10-24 tap
3/4 in (19 mm)
Chassis mount
D
1/2 in (13 mm)
Through door
Access hole
#10-24 tap
5/8 in (16 mm)
G
3/8 in (10 mm)
1 1/8 in (29 mm)
Mounting posts
H
3/4 in (13 mm)
J
1/8 in (3 mm)
Through one side
For Extreme Weatherized models
on hollow metal door only
K
3/4 in (13 mm)
E
F
Additional Information
Left hand door
Right hand door