Q19P1CXXW110E даташит

Q-SERIES 19mmØ Panel Mounting LED Indicator
Product Specification
Distinctive Features and Specifications
•
•
•
•
•
•
•
•
19mm panel mounting LED indicator
10mm coloured diffused epoxy lens or 10mm water clear super bright LEDs
Bright chrome, black chrome and satin grey bezel finish
Prominent bezel styles
2VDC – 220VAC
(2.8 x 0.8) terminals, pins or (200mm long) wire terminations
IP67 sealing option (EN60529)
Supplied with fixing nut and spring washer
Ø 19,00 ±0,1
PANEL CUTOUT
NB: UL Recognised Component
TECHNICAL Specifications
Switch Voltage
Operating Voltage Vop
(Min to Max)
1.8 to 2.5VDC
10.8 to 13.2VDC
21.6 to 26.4VDC
25.2 to 30.8VDC
99 to 121VAC
207 to 253VAC
2VDC (No Resistor)
12VDC
24VDC
28VDC
110VAC
230VAC
Operating Current |op
(Typical All Types)
20mA
20mA
20mA
20mA
6mA
3mA
Intensity (Typical) at |op Standard
Prominent
Forward Voltage
(all voltages)
HE Red
80mcd
2.0V
Green
40mcd
2.2V
Yellow
30mcd
2.1V
Blue
280mcd
3.2V
White
350mcd
3.2V
Bi-colour (Typical) (Red/Green)
80/50mcd
2.0V/2.2V
Tri-colour (Typical) (Red/Green/Yellow)
80/50/50mcd
2.0V/2.2V/2.1V
Bi-colour - The colour is changed by reversing the polarity of the supply voltage.
Tri-colour - The indicator has red and green LEDs, when both connected yellow is produced.
Super Bright
HE Red
Green
Yellow
Blue
White
Prominent
Forward Voltage
(all voltages)
7,500mcd
2.2V
4,100mcd
3.5V
2,500mcd
2.3V
1,300mcd
3.7V
1,900mcd
3.7V
Luminous intensity will be reduced with lower operating current.
Max Reverse Voltage: 5V
Viewing Angle: 60° (dependant on model)
Life Expectancy: 100,000 hours
Operating Temperature Range: –40 to +85°C
Note:The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
www.apem.com
16
Q-SERIES 19mmØ Panel Mounting LED Indicator
Technical Drawings
prominent BEZEL
SOLDER LUG/FASTONS
PINS
WIRES
±10
SHORT BODY PINS
SHORT BODY WIRES
±10
Note: The company reserves the right to change specifications without notice.
www.apem.com
17
Q-SERIES 19mmØ Panel Mounting LED Indicator
Ordering Overview
STANDARD OPTIONS
The Q19 Series is available with a range of standard options, to specify your LED, simply choose one option from each column.
An example is shown below.
Q
19
P
1
B
XX
G
12
SERIES
MOUNTING
HOLE
BEZEL
STYLE
TERMINALS
BEZEL FINISH
TYPE OF
ILLUMINATION
LED COLOUR
VOLTAGE
Q
19 = Ø19mm
1 = Solder Lug/
Fastons
(2.8 x 0.8)
C = Bright Chrome
2 = Pins
B = Black Chrome
3 = Wires
G = Satin Grey
Metal
P = Prominent
Metal
6 = Short body
Pins
E
SEALING
XX = Fixed Light
R = Red
02 = 2VDC
(Blank) = Unsealed
KK = Flashing Light
(only up to 28VDC)
G = Green
06 = 6VDC
E = IP67
Y = Yellow
12 = 12VDC
B = Blue
12A = 12VAC/DC
W = White
24 = 24VDC
YY = Bi-colour
ZZ = Tri-colour
24A = 24VAC/DC
7 = Short body
Wires
SR = Super Bright Red
28 = 28VDC
SG = Super Bright Green
28A = 28VAC/DC
SY = Super Bright Yellow
110 = 110VAC
SB = Super Bright Blue
220 = 220VAC
SW = Super Bright White
RG = Red/Green
Example Q19P1BXXG12E
Ø19mm, prominent bezel, solder lug
terminals, black chrome finish, fixed light,
green, 12volt DC LED, IP67 Panel Seal
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/Green
• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 22AWG, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
• For LEDs with alternate voltages consult APEM
• Bi-colour LEDs, by connecting the gold Faston (+) one colour is produced,
by reversing the supply voltage another colour is produced – Bi-colours are available up to 28VDC
• Take care when soldering to the Faston terminals
• Short body pins and wires are only available up to 28VDC
• The Tri-colour LED has red and green LEDs when both are connected yellow is produced
• Standard Tri-colour Faston terminals are two Anodes (+) and one Cathode (-)
• Tri-colour wires are one red (+) and one green (+) Anode and one black (-) Cathode
• Tri-colour pins are centre (–) cathode, shortest (+) anode pin green, longest (+) anode pin red
• Maximum panel thickness 11mm
• For behind panel epoxy sealing option please consult APEM
• We recommend using Superbright LEDs for use at 220VAC
• For resistorless versions (02) please pay attention to the forward voltage
• For multi-voltage options please consult Apem
www.apem.com
18