Catalogue Sheet: LED Retrofit Kits

Project/Location:
Contractor:
LED Retrofit Kits
Date:
Prepared by:
Convert high-consumption incandescent and
fluorescent lamps to energy-efficient LED lamps
Converting existing Exit Signage from incandescent or fluorescent
lamps to LED (light emitting diodes) lamps drastically reduces
operating and maintenance costs for building owners and property
managers. As part of energy-efficiency programs, some Canadian
electric utilities are also actively promoting conversion to LED with
incentive and rebate programs for installers and building owners/
managers.
Features
Emergi-Lite® offers four retrofit kit options; all
based on the long-life ALINGAP LED technology:
SNAP II Series
• Quick and easy to install
• SNAP II Series
• Long-life, energy-efficient red ALINGAP LED technology
• SNAP III Series
• Module features two independent circuits – one for AC input; one
for DC input
• SNAP I Series
• Bulb Series
• Universal AC input: 120/277/347VAC; universal two-wire DC input: 6 to
24VDC
Benefits of using LED lamps in Exit Signs:
• Exceptional energy-efficiency – reduces energy consumption by up
to 90%
• Power consumption of 1.1W per module
• 10 year limited warranty
• Extremely long life – 10 to 25 years
dimensions
• Important reduction in maintenance and energy costs
Dimensions are approximate and subject to change.
• Average payback is less than two years (see page 6)
• Retrofit kits are easy to install
13/16” [2.1
cm]
cm]
28.3
1/8 ” [
11
• Improved visibility and reliability: ALINGAP LED technology
13/16” [3 cm]
Power consumption
Model
SNAP II
AC Specs
120/277/347VAC
DC Specs
1.1W
6 to 24VDC
1.3W
ordering information
Series
SNAP II= hardwire retrofit kit 11.0”
(28cm) long
SNAP IIB= h
ardwire retrofit kit 9.5”
(24cm) long*
*Available in UN voltage only.
EXAMPLE: SNAPII-UN
84
voltage
-UN= 1
20/277/347VAC, 6/12/24VDC
-U36= 1
20/277/347VAC, 36VDC
-U48= 120/277/347VAC, 48VDC
-U120= 120/347VAC, 120VDC
-120V-1H2= 1
20VAC,120VDC, 2 wires
Project/Location:
Contractor:
LED Retrofit Kits
Date:
Prepared by:
New Design:
0.65W; 60% off power consumption.
SNAP III Series
SNAP I Series
• E asiest to install in its class
• Easiest to install in its class
• C ompact size makes it ideal for virtually all Exit Signs
• Compact size makes it ideal for virtually all Exit Signs
• C an be retrofitted directly on fluorescent ballast
• Can be retrofitted directly on fluorescent ballast
• L ong-life, energy-efficient red ALINGAP LED technology
• Suitable for all AC line applications including Exit Signs equipped
with in-line diodes
• Available with AC adaptor for all types of lamp sockets
• Long-life, energy-efficient ALINGAP LED techonology
• 10 year limited warranty
dimensions
dimensions
Dimensions are approximate and subject to change.
Dimensions are approximate and subject to change.
cm]
4.1
/2 [2
91 ”
cm]
4.1
/2 [2
91 ”
” [2.1 cm]
13/16
” [2.1 cm]
13/16
13/16” [3 cm]
13/16” [3 cm]
Power consumption
Model
SNAP III
AC Specs
Power consumption
DC Specs
120VAC; 86VAC step down from
347VAC
0.65W
N/A
Model
N/A
SNAP I
ordering information
Series
SNAP III= for standard applications
AC Specs
120VAC; 120VAC with in-line
diodes
DC Specs
2.8W
N/A
ordering information
BASE
Series
-C= candelabra
-I= intermediate
-M= medium
-B= bayonet
-F= G23 compact fluorescent
-UN= complete set of bases
(excludes “F” base)
-H= 120Vac (hardwire)
-2H= 277Vac (hardwire)
-3H= 347Vac (hardwire)
SNAP I = w
ith or
without
in-line
diodes
EXAMPLE: SNAPIII-C
EXAMPLE: SNAPI-C
85
bASE
-C= candelabra
-I= intermediate
-M= medium
-B= bayonet
-F= G23 compact fluorescent
-UN= complete set of bases (excludes “F” base)
-H= 120Vac (hardwire)
-2H= 277Vac (hardwire)
-3H= 347Vac (hardwire)
N/A
Project/Location:
Contractor:
LED Retrofit Kits
Date:
Prepared by:
Typical specifications
The following is an example of the savings you can generate by
simply installing an LED retrofit kit in an existing incandescent Exit
Sign.
The Retrofit Kit Cost:
Installation cost (per unit) for a
retrofit kit (Labour):
Wattage rating per incandescent lamp in
existing fixture:
BULB Series
Number of incandescent lamps per
fixture:
• Quick and easy to install
• Available with a wide range of lamp bases for quick lamp to lamp
replacement
• Long-life, energy-efficient ALINGAP LED techonology
• 120VAC or 120VAC with in-line diode
dimensions
Dimensions are approximate and subject to change.
11/4” [3.2 cm]
” [2.5 cm]
33/4” [9.6 cm]
” [2.1 cm]
” [2.1 cm]
13/16
13/16
Model
AC Specs
BULB I
120VAC
0.90W
N/A
N/A
120VAC
2.6W
120VDC
2.6W
ordering information
Series
BULBI/HB= standard version
BULBII/HB= with or without in-line diodes
(2.5W), high brightness
2
My existing incandescent exit lamps last
for:
4 Months
My replacement labour cost:
$25.00/Hour
Estimated lamp replacement
time per exit:
20 Minutes
Current material cost for each
Exit Sign lamp:
$1.00/Lamp
$0.060/$ Per kWh
The PAYBACK FOR YOUR INSTALLATION IS:
1.06 Years
THE ANNUAL RETURN ON INVESTMENT IS:
94.50 %
$70.87
For more information, please consult your sales
representative.
DC Specs
BULB II
15W
1.7W
ANNUAL SAVINGS:
Power consumption
$5.00
Wattage rating of Emergi-Lite LMRUNIV
retrofit kit:
My current energy cost:
51/3” [13 cm]
33/4” [9.6 cm]
43/4” [12 cm]
15/16
$70.00
BASE
C= candelabra
I= intermediate
M= medium
B= bayonet
F= G23 compact
fluorescent
EXAMPLE: BULBI-C
86