aptiQ™ Multi-Technology Readers eaders R

Multi-Technology Readers
Overview
aptiQ™ Multi-Technology Readers by Ingersoll Rand Security
Technologies are designed to simplify your access control
solutions. Transition your system from proximity to smart card
technology at your own pace without having to change out
readers as new technologies are available. aptiQ readers handle
all applicable ISO standards (14443A, 14443B, 15693), are
FIPS 201-1 compliant and are versatile enough to read 125kHz
proximity and 13.56MHz contactless smart cards in a single
unit. aptiQ multi-technology readers interface with aptiQ smart
credentials (MIFARE® classic and MIFARE DESFire™ EV1) and
can read the card serial numbers of a variety of smart cards from
other manufacturers, making your next upgrade in technology
simple and seamless. Additionally, aptiQ readers are already
NFC compatible and able to communicate with NFC-enabled
phones whenever you’re ready to take that step.
aptiQ multi-technology readers use an open architecture platform
designed to work with industry standards and common access
control system interfaces. Multiple aptiQ reader form factors are
designed to fit a variety of placement needs, with an attractive
modern design which will complement any facility’s architecture
and décor. aptiQ readers are very easy to install with the quickconnect design and a standard wiring color scheme that most
technicians are already accustomed to. But if you do have
questions, you’ll never worry about lack of service or assistance.
As always, our knowledgeable sales & support staff is ready to
assist you with any design or technology questions you may
have.
Note: Magnetic stripe multi-technology readers also available.
Features & Benefits
•• Accommodates interior, exterior, metal, and non-metal
installation environments
•• Recognizes most proximity credentials, and aptiQ smart
credentials (MIFARE® classic and MIFARE DESFire™ EV1)
•• FIPS 201-1 Compliant
•• NFC Compatible
•• Quick-connect design for easy installation
•• Simple wiring – color scheme is identical to most
readers in the market
•• Easy-to-install mounting bracket
•• Tri-state LED (red, green, amber) visual indicator
and audio feedback representing status and activity
information, easily discernible for the audibly or visually
impaired.
•• Wiegand output for simple interface with most access
control panels
•• Multiple reader cover color options
•• Limited Lifetime Warranty
•• Multi-technology readers may also
be ordered with RS-485 capability
aptiQ™ Multi-Technology Readers
Readers
aptiQ™
Proximity Mini-Mullion*
PR10
13.56 MHz
Smart Mini-Mullion*
SM10
Multi-Technology Mullion
MT11
Multi-Technology Single Gang
MT15
Multi-Technology Single Gang
Keypad
MTK15
No
ISO 14443A, 14443B, 15693
75 bit PIV**
Yes
Model*
Reader Type
125 kHz
FIPS 201-1 Compliant
n/a
13.56 MHz and 125 kHz
Frequency
Standard Default PIV Output
n/a
MTK15 & MTK15-485 Avg. 120mA
MTK15 & MTK15-485 Peak 230mA
5.1” x 3.25” x 0.76”
12.9 cm x 8.3 cm x 1.9 cm
9.3 oz
DESFire EV1: Up to 2” (5.1 cm)
PIV Credential: Up to 2.5” (6.5 cm)
MT15 & MT15-485 Avg. 120mA
MT15 & MT15-485 Peak 200mA
FCC Certification  IC Certification  UL 294 Listed  R&TTE Directive (15 EU Countries)  CE Mark  IP65
Standards
Certifications
Linear DC
MT11-485 Avg. 115 mA
MT11-485 Peak 145 mA
Proximity: Up to 5” (12.7 cm)
MIFARE: Up to 4” (10 cm)
Wiegand Output: 500 ft. (152 m)
PBT Polymer
5.7 oz
-40 to 158F (-40 to 70C)
5.91” x 1.72” x 0.81”
15 cm x 4.4 cm x 2.1 cm
Warm Tone
Brown
©2013 Ingersoll Rand
005354
01/13
*** RS-485 model numbers include “-485” after the original model number. For example, MT11-485 is the RS-485
version of the multi-technology mini-mullion reader. Multi-drop, Open Standard Device Protocol (OSDP).
** Other output options available through configuration.
* Some features and benefits listed on the front may not be applicable to the smart-only and proximity-only readers.
Schlage MIFARE® Secure Sector  XceedID™ MIFARE® Secure Sector
aptiQ™ smart cards using MIFARE®  aptiQ™ Smart Cards using MIFARE DESFire™ EV1 with PACSA
DESFire® CSN  HID iCLASS® CSN  Inside Contactless PicoTag® CSN  ST Microelectronics® CSN
Texas Instruments Tag-It® Serial Number  Phillips I-Code® CSN
Schlage Proximity  XceedID™ Proximity  HID® Proximity
GE/CASI ProxLite®  AWID® Proximity  LenelProx®
9.1 oz
Wiegand / Clock & Data / RS-485*** (OSDP)
18 AWG, 5 Conductor Stranded/Shielded
MT11 Avg. 100 mA
MT11 Peak 170 mA
5-16 VDC
Avg. 95 mA
Peak 195 mA
Voltage Range
Avg. 65 mA
Peak 110 mA
MIFARE: Up to 3” (7.5 cm)
DESFire EV1: Up to 2” (5.1 cm)
Wiegand / Clock & Data
Cool Tone
Gray
Schlage MIFARE® Secure Sector
XceedID™ MIFARE® Secure Sector
aptiQ™ MIFARE® Secure Sector
aptiQ™ Smart Cards using MIFARE
DESFire™ EV1 with PACSA
DESFire® CSN  HID iCLASS® CSN
Inside Contactless PicoTag® CSN
ST Microelectronics® CSN
Texas Instruments Tag-It® Serial Number
Phillips I-Code® CSN
3.9 oz
4.26” x 1.72” x 0.81”
10.8 cm x 4.4 cm x 2.1 cm
Cream
Schlage Proximity
XceedID™ Proximity
HID® Proximity
GE/CASI ProxLite®
AWID® Proximity
LenelProx®
4.1 oz
Wiegand
Proximity:
Up to 3” (7.5 cm)
Power Supply
Current Requirement
(at 12 VDC and 25 C; mAmps)
Read Range
Cable Specification
System Interfaces
Cabling Distance
Physical Dimensions (HWD)
Operating Temperatures
Weight
Material
Technologies Supported
in Default Mode
Color Options
Black
(Standard)
aptiQ™ Smart Technology from Ingersoll Rand enhances the intelligence of products through a secure, open architecture design in readers, credentials, and smart phone applications. aptiQ™ seamlessly interfaces and communicates with a variety of products, and provides a platform that easily adapts as new innovations enter the marketplace.
INGERSOLL RAND, the Ingersoll Rand logo, Schlage, aptiQ and XceedID, are trademarks of Ingersoll-Rand plc, its subsidiaries and/or affiliates in the United States and other countries.
XACTT, ISOX Lite are trademarks of XceedID Corporation. GE, CASI and ProxLite are trademarks of General Electric Corporation. Inside PicoTag is a trademark of Inside Technologies.
MIFARE and MIFARE DESFire EV1 are trademarks of NXP B.V. HID and iCLASS are trademarks of HID Corporation. Tag-It is a trademark for Texas Instruments. STMicroelectronics is a
trademark of STMicroelectronics Inc. AWID is a trademark of Applied Wireless Identifications Group. All other trademarks are the property of their respective owners.
877-671-7011 • securitytechnologies.ingersollrand.com