advertisement
QuickSpecs
Overview
HP 5500 EI Switch Series
Models
HP 5500-24G EI Switch with 2 Interface Slots
HP 5500-48G EI Switch with 2 Interface Slots
HP 5500-24G-SFP EI Switch with 2 Interface Slots
HP 5500-48G-PoE+ EI Switch with 2 Interface Slots
HP 5500-24G-PoE+ EI Switch with 2 Interface Slots
Key features
High expandability for investment protection
Premium security and integrated management
Multilayer reliability
Convergence-ready support
Outstanding Quality of Service (QoS)
Product overview
These Gigabit Ethernet switches deliver outstanding security, reliability, and multiservice support capabilities for robust switching at the edge or aggregation layer of large enterprise and campus networks, or in the core layer of SMB networks. The HP 5500 EI Switch
Series is comprised of Layer 2/3 Gigabit Ethernet switches that can accommodate the most demanding applications and provide resilient and secure connectivity as well as the latest traffic prioritization technologies to enhance applications on convergent networks. With complete IPv4/IPv6 dual-stack support, the series provides a migration path from IPv4 to IPv6 and has hardware support for IPv6. Designed for increased flexibility, these switches are available with 24 or 48 Gigabit Ethernet ports. Power over
Ethernet (PoE) and non-PoE models are available with optional GbE and 10 GbE expansion capability. The all-fiber model with dual power supplies is ideal for applications that require the highest availability.
JD377A
JD375A
JD374A
JG240A
JG241A
Features and benefits
Software-defined networking
OpenFlow
supports OpenFlow 1.0 and 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control
(routing decision) paths
Quality of Service
(QoS)
Storm restraint
: allows limitation of broadcast, multicast, and unknown unicast traffic rate to cut down on unwanted broadcast traffic on the network
Advanced classifier-based QoS
: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies
QoS policies such as setting priority level and rate limit to bi-directional selected traffic on a per-port, per-VLAN, or whole switch basis
Powerful QoS feature
: creates traffic classes based on ACLs, IEEE 802.1p precedence, IP, DSCP or ToS precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority queuing (SP), weighted round robin
(WRR), SP+WRR, weighted fair queuing (WFQ), and weighted random early discard (WRED)
Traffic policing
: supports Committed Access Rate (CAR) and line rate
Management
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 1
QuickSpecs
Overview
HP 5500 EI Switch Series
Friendly port names
: allow assignment of descriptive names to ports
Remote configuration and management
: is available through a secure Web browser or a CLI
Manager and operator privilege levels
: enable read-only (operator) and read-write (manager) access on CLI and Web browser management interfaces
Command authorization
: leverages HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit trail
Secure Web GUI
: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
Dual flash images
: provide independent primary and secondary operating system files for backup while upgrading
Multiple configuration files
: can be stored to the flash image
Complete session logging
: provides detailed information for problem identification and resolution
SNMPv1, v2c, and v3
: facilitate centralized discovery, monitoring, and secure management of networking devices
Remote monitoring
(RMON): uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private alarm extension group
IEEE 802.1AB Link Layer Discovery Protocol
(LLDP): advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
sFlow
(RFC 3176): provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
Management VLAN
: segments traffic to and from management interfaces, including CLI/telnet, a Web browser interface, and
SNMP
Remote Intelligent Mirroring
: mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network
Device Link Detection Protocol
(DLDP): monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, preventing network problems such as loops
IPv6 management
: provides future-proof networking because the switch is capable of being managed whether the attached network is running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6, and
RADIUS for IPv6
Troubleshooting
: ingress and egress port monitoring enable network problem solving; virtual cable tests provide visibility into cable problems
In-Service Software Upgrade
(ISSU): enables operators to perform upgrades in the shortest possible amount of time with minimal risk to network operations or traffic disruptions
Connectivity
Auto-MDIX
: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
Flow control
: provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
Jumbo packet support
: supports up to 9216-byte frame size to improve the performance of large data transfers
Optional 10 GbE ports
: deliver, through the use of optional modules, additional 10GbE connections, which are available for uplinks or high-bandwidth server connections; flexibly support copper, XFP, SFP+, or CX4 local connections
High-density port connectivity
: provides up to 48 fixed 10/100/1000BASE-T or 24 SFP 100/1000BASE-X ports in a Layer
2/Layer 3 stackable switch supporting unique IRF stacking
IEEE 802.3at Power over Ethernet
(PoE+)
support
: simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
Ethernet operations, administration and maintenance (OAM):
detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the status of the link between two devices
High-bandwidth CX4 and SFP+ local stacking
: provide 10 Gb/s SPF+ or 12 Gb/s CX4 local stacking cables; achieve a resilient stacking configuration
Performance
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 2
QuickSpecs
Overview
Nonblocking architecture
up to 192 Gb/s nonblocking switching fabric provides wire-speed switching with up to 143 million pps throughput
Hardware-based wirespeed access control lists (ACLs)
help provide high levels of security and ease of administration without impacting network performance with a feature-rich
TCAM-based ACL implementation
Resiliency and high availability
HP 5500 EI Switch Series
Separate data and control paths
: keeps control separated from services and keeps service processing isolated; increases security and performance
External redundant power supply
: provides high reliability
Smart link
: allows 50 ms failover between links
Spanning Tree/MSTP, RSTP
: provides redundant links while preventing network loops
Rapid Ring Protection Protocol
(RRPP): connects multiple switches in a high-performance ring using standard Ethernet technology; traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic and applications
Virtual Router Redundancy Protocol
(VRRP): allows a group of routers to dynamically back each other up to create highly available routed environments
Intelligent Resilient Framework
(IRF): creates virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router; switches do not have to be co-located and can be part of a disaster recovery system; servers or switches can be attached using standard LACP for automatic load balancing and high availability; can eliminate the need for complex protocols like Spanning Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP, thereby simplifying network operation
IP Fast Reroute
(FRR): forms backup paths and allows 50 ms switchover in case of a main path fault
Layer 2 switching
32K MAC addresses
: provide access to many Layer 2 devices
IEEE 802.1ad QinQ and Selective QinQ
: increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network
GARP VLAN Registration Protocol
: allows automatic learning and dynamic assignment of VLANs
IEEE 802.1ad QinQ
: increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high-speed campus or metro network
10 GbE port aggregation
: allows grouping of ports to increase overall data throughput to a remote device
Internet Group Management Protocol
(IGMP)
and Multicast Listener Discovery
(MLD)
protocol snooping
: effectively control and manage the flooding of multicast packets in a Layer 2 network
Layer 3 services
Address Resolution Protocol
(ARP): determines the MAC address of another IP host in the same subnet
Dynamic Host Configuration Protocol
(DHCP): simplifies the management of large IP networks and supports client and server;
DHCP Relay enables DHCP operation across subnets
Loopback interface address
: defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability
User Datagram Protocol
(UDP)
helper function
: allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
Route maps
: provide more control during route redistribution; allow filtering and altering of route metrics
Layer 3 routing
IPv4 routing protocols
: support static routes, RIP, OSPF, ISIS, and BGP
IPv6 routing protocols
: provide routing of IPv6 at wire speed; support static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+ for IPv6
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 3
QuickSpecs
Overview
Equal-Cost Multipath
(ECMP): enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth
Policy-based routing
: makes routing decisions based on policies set by the network administrator
IGMPv1, v2, and v3
: allow individual hosts to be registered on a particular VLAN
PIM-SSM, PIM-DM, and PIM-SM
(for IPv4 and IPv6): support IP Multicast address management and inhibition of DoS attacks
IPv6 tunneling
: allows a smooth transition from IPv4 to IPv6 by encapsulating IPv6 traffic over an existing IPv4 infrastructure
Unicast Reverse Path Forwarding
(uRPF): is defined by RFC 3704 and limits erroneous or malicious traffic
Bidirectional Forwarding Detection
(BFD): enables link connectivity monitoring and reduces network convergence time for RIP,
OSPF, BGP, IS-IS, VRRP, and IRF
Security
HP 5500 EI Switch Series
Access control lists
(ACLs): provide IP Layer 2 to Layer 4 traffic filtering; support global ACL, VLAN ACL, port ACL, and IPv6 ACL.
Up to 3072 ingress ACLs and 448 egress ACLs are supported.
IEEE 802.1X
: is an industry-standard method of user authentication that uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server
MAC-based authentication
: authenticates the client with the RADIUS server based on the client's MAC address
Identity-driven security and access control
:
Per-user ACLs
: permit or deny user access to specific network resources based on user identity and time of day, allowing multiple types of users on the same network to access specific network services without risking network security or providing unauthorized access to sensitive data
Automatic VLAN assignment
: automatically assigns users to the appropriate VLAN based on their identities
Secure management access
: securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
Secure FTP
: allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
Guest VLAN
: provides a browser-based environment to authenticated clients that is similar to IEEE 802.1X
Endpoint Admission Defense
(EAD): provides security policies to users accessing a network
Port security
: allows access only to specified MAC addresses, which can be learned or specified by the administrator
Port isolation
: secures and adds privacy, and prevents malicious attackers from obtaining user information
STP BPDU port protection
: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged
BPDU attacks
STP Root Guard
: protects the root bridge from malicious attack or configuration mistakes
DHCP protection
: blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Dynamic ARP protection
: blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
IP source guard
: helps prevent IP spoofing attacks
RADIUS/HWTACACS
: eases switch management security administration by using a password authentication server
Multiple Customer Edge
(MCE): facilitates MPLS VPN network integration with up to 64 VPNs support
Unicast Reverse Path Forwarding
(URPF): allows normal packets to be forwarded correctly, whereas the attaching packet will be discarded due to lack of reverse path route or incorrect inbound interface; prevents source spoofing and distributed attacks; supports distributed URPF
Convergence
IEEE 802.1AB Link Layer Discovery Protocol
(LLDP): facilitates easy mapping using network management applications with
LLDP automated device discovery protocol
LLDP-MED
: is a standard extension that automatically configures network devices, including LLDP-capable IP phones
LLDP-CDP compatibility
: receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
IEEE 802.3af Power over Ethernet
: provides up to 15.4 W per port to PoE-powered devices such as IP phones, wireless access points, and video cameras
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 4
QuickSpecs
Overview
PoE allocations
: supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for more efficient energy savings
Voice VLAN
: automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
IP multicast snooping
(data-driven IGMP): prevents flooding of IP multicast traffic
Internet Group Management Protocol
(IGMP): utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage
IPv4 multicast networks; supports IGMPv1, v2, and v3
Protocol Independent Multicast
(PIM): defines modes of Internet multicasting to allow one-to-many and many-to-many transmission of information; supports PIM Dense Mode (DM), Sparse Mode (SM), and Source-Specific Mode (SSM)
Multicast Source Discovery Protocol
(MSDP): allows multiple PIM-SM domains to interoperate; is used for inter-domain multicast applications
Multicast Border Gateway Protocol
(MBGP): allows multicast traffic to be forwarded across BGP networks and kept separate from unicast traffic
Multicast VLAN
: allows multiple VLANs to receive the same IPv4 or IPv6 multicast traffic, lessening network bandwidth demand by reducing or eliminating multiple streams to each VLAN
Device support
HP 5500 EI Switch Series
Cisco prestandard PoE support
: detects and provides power to Cisco's prestandard PoE devices such as wireless LAN access points and IP phones
Additional information
Green IT and power
: use the latest advances in silicon development, shut off unused ports, and use variable-speed fans to improve energy efficiency
Green initiative support
: provides support for RoHS and WEEE regulations
Warranty and support
Lifetime Warranty 2.0
advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)†
Electronic and telephone support (for Lifetime Warranty 2.0)
limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone support is available from HP for the entire warranty period; to reach our support centers, refer to www.hp.com/networking/contact-support ; for details on the duration of support provided with your product purchase, refer to www.hp.com/networking/warrantysummary
Software releases
to find software for your product, refer to www.hp.com/networking/support ; for details on the software releases available with your product purchase, refer to www.hp.com/networking/warrantysummary
†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP
Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765zl Mobility Controller and HP Survivable Branch Communication zl Module powered by Microsoft Lync has a five-year hardware warranty. For details, refer to the Software license and hardware warranty statements at: www.hp.com/networking/warranty .
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 5
QuickSpecs
Configuration
HP 5500 EI Switch Series
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-
Shippable solution.
Switch Chassis
HP 5500-24G EI Switch
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; autosensing10/100/1000Base-T or SFP min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power Supply included
1U - Height
PDU CABLE NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5500-24G-SFP EI Switch
24 fixed Gigabit Ethernet SFP ports
(Of the 24, 8 are dual-personality ports; autosensing 10/100/1000Base-T or SFP) min=0 \ max=2432 SFP Transceivers
2 - port expansion module slots
1 - JD362A - HP 5500 150WAC Power Supply Included
1U - Height
PDU CABLE NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5500-24G-PoE+ EI Switch w/2 Intf Slts
24 RJ-45 autosensing 10/100/1000 PoE+ports
4 dual-personality ports; autosensing 10/100/1000Base-T or SFP min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power Supply included
1U - Height
JD377A
See Configuration
Note:1, 3
JD377A#B2B
JD377A#B2C
JD377A#B2E
JD374A
See Configuration
Note:1, 3
JD374A#B2B
JD374A#B2C
JD374A#B2E
JG241A
See Configuration
Note:1, 3
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 6
QuickSpecs
Configuration
PDU CABLE NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5500-48G EI Switch
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; autosensing 10/100/1000Base-T or SFP min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power Supply included
1U - Height
PDU CABLE NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5500-48G-PoE+ EI Switch w/2 Intf Slts
48 RJ-45 autosensing 10/100/1000 PoE+ ports
4 dual-personality ports; autosensing 10/100/1000Base-T or SFP min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power Supply included
1U - Height
PDU CABLE NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules:
DA - 13808 EMEA — Version 29 — March 19, 2014
HP 5500 EI Switch Series
JG241A#B2B
JG241A#B2C
JG241A#B2E
JD375A
See Configuration
Note:1, 3
JD375A#B2B
JD375A#B2C
JD375A#B2E
JG240A
See Configuration
Note:1, 3
JG240A#B2B
JG240A#B2C
JG240A#B2E
Page 7
QuickSpecs
HP 5500 EI Switch Series
Configuration
Note 1
Note 3
The following Transceivers install into this Switch
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X120 1G SFP RJ45 T Transceiver
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) or #B2E.
(See Localization Menu)
JD118B
JD119B
JD098B
JD099B
JD061A
JD062A
JD063B
JD102B
JD120B
JD090A
JD091A
JD089B
Remarks Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and
Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and
Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North
America, Mexico, Taiwan, and Japan)
Box Level Integration CTO Models
CTO Solution Sku
HP 55xx CTO Switch Solution
SSP trigger sku
CTO Base Sku
HP 5500-24G EI Switch - CTO
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; autosensing 10/100/1000Base-T or SFP min=0 \ max=4 SFP Transceivers
2 - port expansion module slots
Power Supply Included
1U - Height
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG506A
JD377A
See Configuration
Note:1, 3, 6,7
JD377A#B2B
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 8
QuickSpecs
Configuration
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5500-24G-SFP EI Switch - CTO
24 fixed Gigabit Ethernet SFP ports
8 dual-personality ports; autosensing 10/100/1000Base-T or SFP min=0 \ max=32 SFP Transceivers
2 - port expansion module slots
1 - JD362A - HP 5500 150WAC Power Supply Included
1U - Height
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5500-24G-PoE+ EI Switch w/2 Intf Slts - CTO
24 RJ-45 autosensing 10/100/1000 PoE+ ports
4 dual-personality ports; autosensing10/100/1000Base-T or SFP min=0 \ max=4 SFP Transceivers
2 - port expansion module slots
Power Supply included
1U - Height
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5500-48G EI Switch - CTO
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; autosensing10/100/1000Base-T or SFP min=0 \ max=4 SFP Transceivers
2 - port expansion module slots
Power Supply included
1U - Height
DA - 13808 EMEA — Version 29 — March 19, 2014
HP 5500 EI Switch Series
JD377A#B2C
JD377A#B2E
JD374A
See Configuration
Note:1, 3, 6,7
JD374A#B2B
JD374A#B2C
JD374A#B2E
JG241A
See Configuration
Note:1, 3, 6,7
JG241A#B2B
JG241A#B2C
JG241A#B2E
JD375A
See Configuration
Note:1, 3, 6,7
Page 9
QuickSpecs
HP 5500 EI Switch Series
Configuration
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5500-48G-PoE+ EI Switch w/2 Intf Slts - CTO
48 RJ-45 autosensing 10/100/1000 PoE+ ports
4 dual-personality ports; autosensing10/100/1000Base-T or SFP min=0 \ max=4 SFP Transceivers
2 - port expansion module slots
Power Supply included
1U - Height
JD375A#B2B
JD375A#B2C
JD375A#B2E
JG240A
See Configuration
Note:1, 3, 6,7
JG240A#B2B
JG240A#B2C
JG240A#B2E
JD118B
JD119B
JD098B
JD099B
Note 3
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules:
Note 1 The following Transceivers install into this Switch : (Use #0D1 if switch is CTO)
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X120 1G SFP RJ45 T Transceiver
JD061A
JD062A
JD063B
JD102B
JD120B
JD090A
JD091A
JD089B
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) or #B2E. (See Localization
Menu)
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 10
QuickSpecs
HP 5500 EI Switch Series
Configuration
Note 6
Note 7
Remark:
If this Switch is selected, Then a Minimum of 1 factory integrated accessory must be ordered and integrated to CTO chassis. See Menu below, option must have a #0D1 to be integrated to the CTO Chassis.
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis and integrated to the JG506A - HP 55xx CTO Enablement. (Min 1/Max 1 Switch per SSP)
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW.
(Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America, Mexico,
Taiwan, and Japan)
Rack Level Integration CTO Models
Switch Chassis
HP 5500-24G EI Switch
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; autosensing 10/100/1000Base-T or SFP min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power Supply included
1U - Height
PDU CABLE NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
C15 PDU Jumper Cord (ROW)
HP 5500-24G-SFP EI Switch
24 fixed Gigabit Ethernet SFP ports
(Of the 24, 8 are dual-personality ports; autosensing 10/100/1000Base-T or SFP) min=0 \ max=2432 SFP Transceivers
2 port expansion module slots
1 - JD362A - HP 5500 150WAC Power Supply Included
1U - Height
PDU CABLE NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JD377A
See
Configuration
Note:1, 3, 10
JD377A#B2B
JD377A#B2C
JD374A
See
Configuration
Note:1, 3, 10
JD374A#B2B
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 11
QuickSpecs
Configuration
PDU CABLE ROW
C15 PDU Jumper Cord (ROW)
HP 5500-24G-PoE+ EI Switch w/2 Intf Slts
24 RJ-45 autosensing 10/100/1000 PoE+ports
4 dual-personality ports; autosensing 10/100/1000Base-T or SFP min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power Supply included
1U - Height
PDU CABLE NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
C15 PDU Jumper Cord (ROW)
HP 5500-48G EI Switch
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; autosensing10/100/1000Base-T or SFP min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power Supply included
1U - Height
PDU CABLE NA/MEX/TW/JPC
15 to C14 Jumper Cord (NA)
PDU CABLE ROW
C15 PDU Jumper Cord (ROW)
HP 5500-48G-PoE+ EI Switch w/2 Intf Slts
48 RJ-45 autosensing 10/100/1000 PoE+ports
4 dual-personality ports; autosensing10/100/1000Base-T or SFP min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power Supply included
1U - Height
PDU CABLE NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
C15 PDU Jumper Cord (ROW)
DA - 13808 EMEA — Version 29 — March 19, 2014
HP 5500 EI Switch Series
JD374A#B2C
JG241A
See
Configuration
Note:1, 3, 10
JG241A#B2B
JG241A#B2C
JD375A
See
Configuration
Note:1, 3, 10
JD375A#B2B
JD375A#B2C
JG240A
See
Configuration
Note:1, 3, 10
JG240A#B2B
JG240A#B2C
Page 12
QuickSpecs
HP 5500 EI Switch Series
Configuration
Note 3
Configuration Rules:
Note 1
Note 10
Remarks:
The following Transceivers install into this Switch: (Use #0D1 if switch is CTO)
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X120 1G SFP RJ45 T Transceiver
JD118B
JD119B
JD098B
JD099B
JD061A
JD062A
JD063B
JD102B
JD120B
JD090A
JD091A
JD089B
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization
Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable option on the Switches/Routers.
If HP CTO Switch Chassis is selected for Rack Level Integration, Then the Switch needs to integrate (with #0D1) to the Rack.
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C
ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level
CTO)"
Enter the following menu selections as integrated to the CTO Model X above if order is factory built.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 13
QuickSpecs
HP 5500 EI Switch Series
Configuration
Switch Enclosure Options
External Redundant Power Supplies
Internal Power Supplies
(JD374A and JG249A Switches Only ) (std 1 // max 2) User Selection (min 0 // max 1) per switch enclosure
HP 5500 150WDC Power Supply JD366A
HP 5500 150WAC Power Supply includes 1 x c13, 910w
See Configuration
Note: 4
JD362A
See Configuration
Note:1, 2,3,4
PDU CABLE NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules:
Note 2
JD362A#B2B
JD362A#B2C
JD362A#B2E
If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch . (Offered only in AMS, Taiwan, and Japan)
Note 3
Note 4
Remarks:
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization
Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable option on the Switches/Routers.
Not supported on JD377A, JG241A, JD375A, JG240A, JG251A, JG250A, JG252A, JG253A
If Power Supply is added to switch with power supply, then Switch and Power Supply localization must match.
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C
ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America,
Mexico, Taiwan, and Japan)
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 14
QuickSpecs
HP 5500 EI Switch Series
Configuration
HP RPS 800 Redundant Power Supply
Height = 1U includes 1 x c13
HP RPS1600 Redundant Power System
Height = 1U includes 1 x c13, 1600w and Power Supply port
HP RPS1600 1600W AC Power Supply
Installs into JG136A only
JD183A
See Configuration
Note:2,4,6
JG136A
See Configuration
Note:2, 3,5
JG137A
See Configuration
Note:1, 3
Configuration Rules:
Note 1
Note 2
Note 3
Note 4
Note 5
If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System must be on order or onsite.
Localization required.
Each switch will only support 1 JG136A and 1 JG137A Power supply systems.
Supported only on the JD377A, JG250A, JD375A and JG251A Switches
Supported only on the JG241A, JG252A, JG240A and JG253A Switches
Note 6 Each switch will only support 1 JD183A Power supply.
Options for the HPN 5500 Power Supplies
HP X290 1000 A JD5 2m RPS Cable
HP X290 1000 A JD5 Non-PoE 2m RPS Cable
HP X290 1000 B JD5 2m RPS Cable
HP X290 500/800 1m RPS Cable
HP X290 500 U 1m RPS Cable
Remarks: These cables are used to connect the External Power System to Switch.
Modules
(std 0 // max 2) User Selection (min 0 // max 2) per switch enclosure
HP 5500 2-port 10GbE XFP Module min=0 \ max=2 XFP Transceivers
JD187A
JD188A
JD189A
JD190A
JD185A
JD359B
See Configuration
Note:2, 5
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 15
QuickSpecs
Configuration
HP 5500 2-port 10GbE Local Connect Mod min=0 \ max=2 CX4 Cables
HP 5500 1-port 10GbE XFP Module min=0 \ max=1 XFP Transceivers
HP 5500 EI Switch Series
HP 5500/5120 2-port 10GbE SFP+ Module min=0 \ max=2 SFP+ Transceivers
HP 5500/4800 2-port GbE SFP Module min=0 \ max=2 SFP Transceivers
HP 5500/5120 2p 10GBASE-T Module
No Transceivers
Note 3
Note 2
Configuration Rules:
Note 1 The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO)
HP X130 10G SFP+ LC ER 40km Transceiver
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
HP X135 10G XFP LC ER Transceiver
HP X130 10G XFP LC LR Single Mode 10km 1310nm Transceiver
HP X130 10G XFP LC SR Transceiver
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
JG234A
JD092B
JD093B
JD094B
JD095C
JD096C
JD097C
JG081C
JC784C
JD121A
JD108B
JD117B
JD118B
JD119B
JD098B
JD099B
JD061A
JD062A
JD063B
JD360B
See Configuration
Note:4, 5
JD361B
See Configuration
Note:2, 5
JD368B
See Configuration
Note:1, 5
JD367A
See Configuration
Note:3, 5
JG535A
See Configuration
Note:5
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 16
QuickSpecs
HP 5500 EI Switch Series
Configuration
Note 4
Note 5
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X120 1G SFP RJ45 T Transceiver
JD102B
JD120B
JD090A
JD091A
JD089B
The following Cables install into this Module: (Use #B01 if switch is CTO)
HP X230 Local Connect 50cm CX4 Cable
HP X230 Local Connect 100cm CX4 Cable
HP X230 CX4 to CX4 3m Cable
NOTE:
Two JD365A - HP X230 CX4 to CX4 3m Cable should be added by default if Module is selected.
This Module should be ordered as #0D1 if the Switch is Box Level CTO, and #B01 when Factory
Racked (Rack Level Integration CTO).
JD365A
JD363B
JD364B
Transceivers
SFP Transceivers
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X120 1G SFP RJ45 T Transceiver
SFP+ Transceivers
HP X130 10G SFP+ LC ER 40km Transceiver
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X240 10G SFP+ SFP+ 0.65m DAC Cable
HP X240 10G SFP+ SFP+ 1.2m DAC Cable
HP X240 10G SFP+ SFP+ 3m DAC Cable
HP X240 10G SFP+ SFP+ 5m DAC Cable
HP X240 10G SFP+ 7m DAC Cable
JD090A
JD091A
JD089B
JG234A
JD092B
JD093B
JD094B
JD095C#B01
JD096C#B01
JD097C#B01
JG081C #B01
JC784C #B01
JD118B
JD119B
JD063B
JD062A
JD061A
JD098B
JD099B
JD102B
JD120B
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 17
QuickSpecs
Configuration
XFP Transceivers
HP X130 10G XFP LC LR Single Mode 10km 1310nm Transceiver
HP X130 10G XFP LC SR Transceiver
HP X135 10G XFP LC ER Transceiver
Cables
Local Connect Cables
HP X230 Local Connect 50cm CX4 Cable
HP X230 Local Connect 100cm CX4 Cable
HP X230 CX4 to CX4 3m Cable
Multi-Mode Cables
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
HP 5500 EI Switch Series
JD108B
JD117B
JD121A
JD363B#B01
JD364B#B01
JD365A#B01
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 18
QuickSpecs
Technical Specifications
HP 5500 EI Switch Series
HP 5500-24G EI Switch with 2 Interface Slots
(JD377A)
Ports
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
Supports a maximum of 24 autosensing 10/100/1000 ports
Physical characteristics Dimensions
17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.36 cm) (1U height)
Performance
Weight
Memory and processor
256 MB SDRAM, 32 MB flash; packet buffer size: 2 MB
Mounting
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
1000 Mb Latency
10 Gbps Latency
8.82 lb (4 kg)
< 3.2 µs
< 2.6 µs
Environment
Throughput
Routing/Switching capacity
Routing table size
107.2 million pps
144 Gb/s
12000 entries (IPv4)
Operating temperature
32ºF to 113ºF (0ºC to 45ºC)
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
10% to 90%, noncondensing
-40ºF to 158ºF (-40ºC to 70ºC)
5% to 95%, noncondensing
Acoustic
Electrical characteristics Frequency
Maximum heat dissipation
Voltage
Safety
Emissions
ISO 7779
50/60 Hz
375 BTU/hr (395.63 kJ/hr)
100-240 VAC
Maximum power rating
110 W
Notes
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-
4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-
3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 19
QuickSpecs
HP 5500 EI Switch Series
Technical Specifications
Management
Services
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; IEEE 802.3
Ethernet MIB
3-year, 4-hour onsite, 13x5 coverage for hardware (UV870E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV873E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV876E)
3-year, 24x7 SW phone support, software updates (UV879E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR574E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR575E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR576E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV871E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV874E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV877E)
4-year, 24x7 SW phone support, software updates (UV880E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV872E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV875E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV878E)
5-year, 24x7 SW phone support, software updates (UV881E)
3 Yr 6 hr Call-to-Repair Onsite (UW966E)
4 Yr 6 hr Call-to-Repair Onsite (UW967E)
5 Yr 6 hr Call-to-Repair Onsite (UW968E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR578E)
1-year, 24x7 software phone support, software updates (HR577E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS658E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS659E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS660E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS661E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS662E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS663E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS664E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS665E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5500-48G EI Switch with 2 Interface Slots
(JD375A)
Ports
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 20
QuickSpecs
HP 5500 EI Switch Series
Technical Specifications
Supports a maximum of 48 autosensing 10/100/1000 ports
Physical characteristics Dimensions
17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.36 cm) (1U height)
Weight
9.92 lb (4.5 kg)
Memory and processor
256 MB SDRAM, 32 MB flash; packet buffer size: 4 MB
Mounting
Performance
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
1000 Mb Latency
10 Gbps Latency
< 3.2 µs
< 2.6 µs
Environment
Throughput
Routing/Switching capacity
142.9 million pps
192 Gb/s
Routing table size
12000 entries (IPv4)
Operating temperature
32ºF to 113ºF (0ºC to 45ºC)
Operating relative humidity
10% to 90%, noncondensing
-40ºF to 158ºF (-40ºC to 70ºC)
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
5% to 95%, noncondensing
Acoustic
Electrical characteristics Frequency
Maximum heat dissipation
Safety
Emissions
Management
Services
ISO 7779
50/60 Hz
392 BTU/hr (413.56 kJ/hr)
Voltage
100-240 VAC
Maximum power rating
115 W
Notes
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-
4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-
3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; IEEE 802.3
Ethernet MIB
3-year, 4-hour onsite, 13x5 coverage for hardware (HQ080E)
3-year, 4-hour onsite, 24x7 coverage for hardware (HQ081E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HQ084E)
3-year, 24x7 SW phone support, software updates (HQ083E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR580E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR581E)
Installation with minimum configuration, system-based pricing (UW451E)
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 21
QuickSpecs
HP 5500 EI Switch Series
Technical Specifications
4-year, 4-hour onsite, 13x5 coverage for hardware (HQ085E)
4-year, 4-hour onsite, 24x7 coverage for hardware (HQ086E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ093E)
4-year, 24x7 SW phone support, software updates (HQ091E)
5-year, 4-hour onsite, 13x5 coverage for hardware (HQ088E)
5-year, 4-hour onsite, 24x7 coverage for hardware (HQ089E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ094E)
5-year, 24x7 SW phone support, software updates (HQ092E)
3 Yr 6 hr Call-to-Repair Onsite (HQ082E)
4 Yr 6 hr Call-to-Repair Onsite (HQ087E)
5 Yr 6 hr Call-to-Repair Onsite (HQ090E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR579E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR583E)
1-year, 24x7 software phone support, software updates (HR582E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS674E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS675E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS676E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS677E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS678E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS679E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS680E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS681E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5500-24G-SFP EI Switch with 2 Interface Slots
(JD374A)
Ports
24 fixed Gigabit Ethernet SFP ports
8 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
Physical characteristics Dimensions
17.32(w) x 14.17(d) x 1.72(h) in (44 x 36 x 4.36 cm) (1U height)
Weight
13.89 lb (6.3 kg)
Memory and processor
256 MB SDRAM, 32 MB flash; packet buffer size: 2 MB
Mounting
Performance
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
1000 Mb Latency
< 3.2 µs
10 Gbps Latency
Throughput
Routing/Switching capacity
Routing table size
< 2.6 µs
107.2 million pps
144 Gb/s
12000 entries (IPv4)
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 22
QuickSpecs
HP 5500 EI Switch Series
Technical Specifications
Environment Operating temperature
32ºF to 113ºF (0ºC to 45ºC)
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
10% to 90%, noncondensing
-40ºF to 158ºF (-40ºC to 70ºC)
5% to 95%, noncondensing
Acoustic
Electrical characteristics Frequency
Maximum heat dissipation
Voltage
Safety
Emissions
Management
Notes
Services
ISO 7779
50/60 Hz
392 BTU/hr (413.56 kJ/hr)
100-240 VAC
Maximum power rating
115 W
Notes
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-
4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-
3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; IEEE 802.3
Ethernet MIB
1 power supply included
3-year, 4-hour onsite, 13x5 coverage for hardware (UV870E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV873E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV876E)
3-year, 24x7 SW phone support, software updates (UV879E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR574E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR575E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR576E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV871E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV874E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV877E)
4-year, 24x7 SW phone support, software updates (UV880E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV872E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV875E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV878E)
5-year, 24x7 SW phone support, software updates (UV881E)
3 Yr 6 hr Call-to-Repair Onsite (UW966E)
4 Yr 6 hr Call-to-Repair Onsite (UW967E)
5 Yr 6 hr Call-to-Repair Onsite (UW968E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR578E)
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 23
QuickSpecs
HP 5500 EI Switch Series
Technical Specifications
1-year, 24x7 software phone support, software updates (HR577E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS658E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS659E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS660E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS661E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS662E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS663E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS664E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS665E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5500-48G-PoE+ EI Switch with 2 Interface Slots
(JG240A)
Ports
48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
Supports a maximum of 48 autosensing 10/100/1000 ports
Physical characteristics Dimensions
17.32(w) x 16.54(d) x 1.72(h) in (43.99 x 42.01 x 4.37 cm) (1U height)
Weight
14.33 lb. (6.5 kg)
Memory and processor
256 MB SDRAM, 32 MB flash; packet buffer size: 4 MB
Mounting
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
Performance 1000 Mb Latency
< 3.2 µs
10 Gbps Latency
Throughput
Routing/Switching capacity
< 2.6 µs
142.9 million pps
192 Gb/s
Environment
Routing table size
12000 entries (IPv4)
Operating temperature
32ºF to 113ºF (0ºC to 45ºC)
Operating relative humidity
10% to 90%, noncondensing
-40ºF to 158ºF (-40ºC to 70ºC)
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
Acoustic
5% to 95%, noncondensing
ISO 7779
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 24
QuickSpecs
HP 5500 EI Switch Series
Technical Specifications
Electrical characteristics Frequency
Maximum heat dissipation
Voltage
50/60 Hz
921 BTU/hr (971.66 kJ/hr)
DC voltage
100-240 VAC
-52 to -55 VDC
Maximum power rating
910 W
PoE power
740 W
Safety
Emissions
Management
Services
Notes
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS).
With AC input, the maximum power consumption is 640 W; PoE is 370 W.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-
4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-
3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; IEEE
802.3 Ethernet MIB
3-year, 4-hour onsite, 13x5 coverage for hardware (HQ080E)
3-year, 4-hour onsite, 24x7 coverage for hardware (HQ081E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HQ084E)
3-year, 24x7 SW phone support, software updates (HQ083E)
4-year, 4-hour onsite, 13x5 coverage for hardware (HQ085E)
4-year, 4-hour onsite, 24x7 coverage for hardware (HQ086E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ093E)
4-year, 24x7 SW phone support, software updates (HQ091E)
5-year, 4-hour onsite, 13x5 coverage for hardware (HQ088E)
5-year, 4-hour onsite, 24x7 coverage for hardware (HQ089E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ094E)
5-year, 24x7 SW phone support, software updates (HQ092E)
3 Yr 6 hr Call-to-Repair Onsite (HQ082E)
4 Yr 6 hr Call-to-Repair Onsite (HQ087E)
5 Yr 6 hr Call-to-Repair Onsite (HQ090E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5500-24G-PoE+ EI Switch with 2 Interface Slots
(JG241A)
Ports
24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 25
QuickSpecs
HP 5500 EI Switch Series
Technical Specifications
4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
Supports a maximum of 24 autosensing 10/100/1000 ports
Physical characteristics Dimensions
17.32(w) x 16.54(d) x 1.69(h) in (43.99 x 42.01 x 4.29 cm) (1U height)
Weight
13.23 lb (6 kg)
Memory and processor
256 MB SDRAM, 32 MB flash; packet buffer size: 2 MB
Mounting
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
Performance 1000 Mb Latency
< 3.2 µs
Environment
10 Gbps Latency
Throughput
Routing/Switching capacity
< 2.6 µs
107.2 million pps
144 Gb/s
Routing table size
12000 entries (IPv4)
Operating temperature
32ºF to 113ºF (0ºC to 45ºC)
Operating relative humidity
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
Acoustic
5% to 95%, noncondensing
Electrical characteristics Frequency
Maximum heat dissipation
ISO 7779
50/60 Hz
700 BTU/hr (738.5 kJ/hr)
Safety
Emissions
Voltage
100-240 VAC
DC Voltage
52 to -55 VDC
Maximum power rating
575 W
PoE power
370 W
Notes
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS).
With DC input, the maximum power consumption is 485 W; PoE is 370 W.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-
4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-
3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 26
QuickSpecs
HP 5500 EI Switch Series
Technical Specifications
Management
Services
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; IEEE
802.3 Ethernet MIB
3-year, 4-hour onsite, 13x5 coverage for hardware (UV870E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV873E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV876E)
3-year, 24x7 SW phone support, software updates (UV879E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV871E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV874E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV877E)
4-year, 24x7 SW phone support, software updates (UV880E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV872E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV875E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV878E)
5-year, 24x7 SW phone support, software updates (UV881E)
3 Yr 6 hr Call-to-Repair Onsite (UW966E)
4 Yr 6 hr Call-to-Repair Onsite (UW967E)
5 Yr 6 hr Call-to-Repair Onsite (UW968E)
Standards and protocols
(applies to all products in series)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
BGP
RFC 1657 Definitions of Managed Objects for
BGPv4
RFC 1771 BGPv4
RFC 2858 BGP-4 Multi-Protocol Extensions
Device management
RFC 1157 SNMPv1/v2c
RFC 1256 ICMP Router Discovery Protocol (IRDP)
RFC 1305 NTPv3
RFC 1901 (Community based SNMPv2)
RFC 2452 MIB for TCP6
RFC 2454 MIB for UDP6
RFC 2573 (SNMPv3 Applications)
RFC 2576 (Coexistence between SNMP V1, V2,
V3)
RFC 2819 RMON
RFC 3410 (Management Framework)
RFC 3416 (SNMP Protocol Operations v2)
RFC 3417 (SNMP Transport Mappings)
HTML and telnet management
Multiple Configuration Files
SNMP v3 and RMON RFC support
SSHv1/SSHv2 Secure Shell
General protocols
IEEE 802.1ad Q-in-Q
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
RFC 2464 Transmission of IPv6 over Ethernet
Networks
RFC 2475 IPv6 DiffServ Architecture
RFC 2710 Multicast Listener Discovery (MLD) for
IPv6
RFC 2740 OSPFv3 for IPv6
RFC 2893 Transition Mechanisms for IPv6 Hosts and Routers
RFC 2925 Definitions of Managed Objects for
Remote Ping, Traceroute, and Lookup Operations
(Ping only)
RFC 2925 Remote Operations MIB (Ping only)
RFC 3056 Connection of IPv6 Domains via IPv4
Clouds
RFC 3162 RADIUS and IPv6
RFC 3306 Unicast-Prefix-based IPv6 Multicast
Addresses
RFC 3307 IPv6 Multicast Address Allocation
RFC 3315 DHCPv6 (client and relay)
RFC 3484 Default Address Selection for IPv6
RFC 3493 Basic Socket Interface Extensions for IPv6
RFC 3513 IPv6 Addressing Architecture
RFC 3542 Advanced Sockets API for IPv6
RFC 3587 IPv6 Global Unicast Address Format
RFC 3596 DNS Extension for IPv6
RFC 3810 MLDv2 for IPv6
RFC 4113 MIB for UDP
RFC 4443 ICMPv6
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 27
QuickSpecs
Technical Specifications
IEEE 802.1Q (GVRP)
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation (LAG)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-X
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 854 TELNET
RFC 925 Multi-LAN Address Resolution
RFC 950 Internet Standard Subnetting Procedure
RFC 951 BOOTP
RFC 1027 Proxy ARP
RFC 1058 RIPv1
RFC 1122 Host Requirements
RFC 1141 Incremental updating of the Internet checksum
RFC 1213 Management Information Base for
Network Management of TCP/IP-based internets
RFC 1256 ICMP Router Discovery Protocol (IRDP)
RFC 1305 NTPv3
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 1723 RIP v2
RFC 1812 IPv4 Routing
RFC 1887 An Architecture for IPv6 Unicast Address
Allocation
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 2338 VRRP
RFC 2375 IPv6 Multicast Address Assignments
RFC 2616 HTTP Compatibility v1.1
RFC 2644 Directed Broadcast Control
RFC 2865 Remote Authentication Dial In User
Service (RADIUS)
RFC 2866 RADIUS Accounting
RFC 3246 Expedited Forwarding PHB
RFC 3410 Applicability Statements for SNMP
RFC 3414 User-based Security Model (USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)
RFC 3415 View-based Access Control Model
(VACM) for the Simple Network Management
HP 5500 EI Switch Series
MIBs
RFC 1212 Concise MIB Definitions
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1657 BGP-4 MIB
RFC 1724 RIPv2 MIB
RFC 1757 Remote Network Monitoring MIB
RFC 1850 OSPFv2 MIB
RFC 2012 SNMPv2 MIB for TCP
RFC 2013 SNMPv2 MIB for UDP
RFC 2233 Interface MIB
RFC 2452 IPV6-TCP-MIB
RFC 2454 IPV6-UDP-MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Target MIB
RFC 2574 SNMP USM MIB
RFC 2618 RADIUS Authentication Client MIB
RFC 2620 RADIUS Accounting Client MIB
RFC 2665 Ethernet-Like-MIB
RFC 2674 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering, and Virtual
Extensions
RFC 2737 Entity MIB (Version 2)
RFC 2787 VRRP MIB
RFC 2819 RMON MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 4113 UDP MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1D (STP)
RFC 1157 SNMPv1
RFC 1212 Concise MIB definitions
RFC 1215 SNMP Generic traps
RFC 1757 RMON 4 groups: Stats, History, Alarms and Events
RFC 1901 SNMPv2 Introduction
RFC 1918 Private Internet Address Allocation
RFC 2373 Remote Network Monitoring
Management Information Base for High Capacity
Networks
RFC 2571 An Architecture for Describing SNMP
Management Frameworks
RFC 2572 Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)
RFC 2573 SNMP Applications
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 28
QuickSpecs
HP 5500 EI Switch Series
Technical Specifications
Protocol (SNMP)
RFC 3417 Transport Mappings for the Simple
Network Management Protocol (SNMP)
RFC 3484 Default Address Selection for Internet
Protocol version 6 (IPv6)
RFC 3493 Basic Socket Interface Extensions for IPv6
RFC 3542 Advanced Sockets Application Program
Interface (API) for IPv6
RFC 3587 IPv6 Global Unicast Address Format
RFC 3596 DNS Extensions to Support IP Version 6
RFC 3623 Graceful OSPF Restart
RFC 3704 Unicast Reverse Path Forwarding (URPF)
RFC 3768 VRRP
RFC 3810 Multicast Listener Discovery Version 2
(MLDv2) for IPv6
RFC 4113 Management Information Base for the
User Datagram Protocol (UDP)
RFC 4213 Basic IPv6 Transition Mechanisms
RFC 4443 Internet Control Message Protocol
(ICMPv6) for the Internet Protocol Version 6 (IPv6)
Specification
802.1r - GARP Proprietary Attribute Registration
Protocol (GPRP)
RFC 2574 SNMPv3 User-based Security Model
(USM)
RFC 2575 SNMPv3 View-based Access Control
Model (VACM)
RFC 2576 Coexistence between SNMP versions
RFC 2578 SMIv2
RFC 2581 TCP6
RFC 2819 Four groups of RMON: 1 (statistics), 2
(history), 3 (alarm) and 9 (events)
RFC 2925 Definitions of Managed Objects for
Remote Ping, Traceroute, and Lookup Operations
RFC 3176 sFlow
RFC 3410 Introduction to Version 3 of the
Internet-standard Network Management Framework
RFC 3414 SNMPv3 User-based Security Model
(USM)
RFC 3415 SNMPv3 View-based Access Control
Model VACM)
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3
IP multicast
RFC 2236 IGMPv2
RFC 2710 Multicast Listener Discovery (MLD) for
IPv6
RFC 2858 Multiprotocol Extensions for BGP-4
RFC 3376 IGMPv3
RFC 3569 An Overview of Source-Specific Multicast
(SSM)
RFC 3618 Multicast Source Discovery Protocol
(MSDP)
RFC 3973 PIM Dense Mode
RFC 4601 PIM Sparse Mode
OSPF
RFC 1587 OSPF NSSA
RFC 1850 OSPFv2 Management Information Base
(MIB), traps
RFC 2328 OSPFv2
RFC 2370 OSPF Opaque LSA Option
RFC 3623 Graceful OSPF Restart
QoS/CoS
IEEE 802.1P (CoS)
RFC 2474 DSCP DiffServ
RFC 2475 DiffServ Architecture
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
IPv6
RFC 1881 IPv6 Address Allocation Management
RFC 1887 IPv6 Unicast Address Allocation
Architecture
RFC 1981 IPv6 Path MTU Discovery
RFC 2080 RIPng for IPv6
RFC 2373 IPv6 Addressing Architecture
RFC 2375 IPv6 Multicast Address Assignments
RFC 2460 IPv6 Specification
RFC 2461 IPv6 Neighbor Discovery
RFC 2462 IPv6 Stateless Address Auto-configuration
RFC 2463 ICMPv6
Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 1918 Address Allocation for Private Internets
RFC 2865 RADIUS Authentication
RFC 2866 RADIUS Accounting
Access Control Lists (ACLs)
MAC Authentication
Port Security
SSHv2 Secure Shell
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 29
QuickSpecs
Accessories
HP 5500 EI Switch Series accessories
Modules
HP 5500 2-port 10GbE XFP Module
HP 5500 2-port 10GbE Local Connect Module
HP 5500 1-port 10GbE XFP Module
HP 5500/4800 2-port GbE SFP Module
HP 5500/5120 2-port 10GbE SFP+ Module
NEW
HP 5500/5120 2-port 10GBASE-T Module
Transceivers
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X130 SFP+ LC SR Transceiver
HP X130 SFP+ LC LRM Transceiver
HP X130 SFP+ LC LR Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X110 100M SFP LC FX Transceiver
HP X130 10G XFP LC LR Transceiver
HP X130 10G XFP LC SR Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X135 10G XFP LC ER Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
HP X120 1G SFP RJ45 T Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
Cables
HP X230 Local Connect 100 cm CX4 Cable
HP X230 Local Connect CX4 300 cm Cable
HP 0.5 m Multimode OM3 LC/LC Optical Cable
HP 1 m Multimode OM3 LC/LC Optical Cable
HP 2 m Multimode OM3 LC/LC Optical Cable
HP 5 m Multimode OM3 LC/LC Optical Cable
HP 15 m Multimode OM3 LC/LC Optical Cable
HP 30 m Multimode OM3 LC/LC Optical Cable
HP 50 m Multimode OM3 LC/LC Optical Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
DA - 13808 EMEA — Version 29 — March 19, 2014
HP 5500 EI Switch Series
JD359B
JD360B
JD361B
JD367A
JD368B
JG535A
JD061A
JD062A
JD063B
JD090A
JD091A
JD118B
JD119B
JD120B
JD121A
JD095C
JD096C
JD097C
JG081C
JD092B
JD093B
JD094B
JD098B
JD099B
JD102B
JD108B
JD117B
JC784C
JD089B
JG234A
JD364B
JD365A
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
Page 30
QuickSpecs
Accessories
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
HP 50 m PremierFlex OM3+ LC/LC Optical Cable
HP X230 Local Connect 50cm CX4 Cable
Power Supply
HP 5800/5500 150W AC Power Supply
HP 5800/5500 150W DC Power Supply
HP RPS 800 Redundant Power System
HP RPS 1600 Redundant Power System
HP RPS 1600 1600W AC Power Supply
Power cords
HP X290 1000 A JD5 2m RPS Cable
HP X290 1000 A JD5 Non-PoE 2m RPS Cable
HP X290 1000 B JD5 2m RPS Cable
HP X290 500/800 1m RPS Cable
HP X290 500 U 1m RPS Cable
HP 5500 EI Switch Series
QK734A
QK735A
QK736A
QK737A
JD363B
JD362A
JD366A
JD183A
JG136A
JG137A
JD187A
JD188A
JD189A
JD190A
JD185A
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 31
QuickSpecs
Accessory Product Details
HP 5500 EI Switch Series
NOTE:
Details are not available for all accessories. The following specifications were available at the time of publication.
HP 5500 2-port 10GbE XFP
Module
(JD359B)
HP 5500 1-port 10GbE XFP
Module
(JD361B)
Ports
Services
Ports
Services
2 XFP 10-GbE ports; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
1 XFP 10-GbE port; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP 5500/4800 2-port GbE
SFP Module
(JD367A)
Ports
Services
2 SFP 1000 Mbps ports
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP X125 1G SFP LC LH40
1310nm Transceiver
(JD061A)
Ports
Connectivity
1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics)
Connector type LC
A small form-factor pluggable SFP Gigabit LH40 transceiver that provides a full duplex Gigabit solution up to 40km on a singlemode fiber.
Physical characteristics
Wavelength
Dimensions
Full configuration weight
1310 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption typical 0.8 W
Power consumption maximum
1.0 W
Cabling
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Services
Maximum distance:
40km distance
Fiber type Single Mode
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 32
QuickSpecs
HP 5500 EI Switch Series
Accessory Product Details
HP X120 1G SFP LC LH40
1550nm Transceiver
(JD062A)
A small form-factor pluggable (SFP) Gigabit
LH40 transceiver that provides a full-duplex
Gigabit solution up to 40 km on a single mode fiber.
Ports
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connectivity
Connector type
Wavelength
Physical characteristics
Dimensions
LC
1550 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption typical 0.8 W
Cabling
Power consumption maximum
1.0 W
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Services
Maximum distance:
40km distance
Fiber type Single Mode
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP X125 1G SFP LC LH70
Transceiver
(JD063B)
A small form-factor pluggable (SFP) Gigabit
LH70 transceiver that provides a full-duplex
Gigabit solution up to
70km on a single-mode fiber.
Ports
Connectivity
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
Wavelength
LC
1550 nm
Physical characteristics Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight
0.04 lb. (0.02 kg)
Electrical characteristics Power consumption typical
0.8 W
Cabling
Power consumption maximum
1.0 W
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Services
Maximum distance:
• 70km
Fiber type Single Mode
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 33
QuickSpecs
HP 5500 EI Switch Series
Accessory Product Details
HP X120 1G SFP LC BX 10-
U Transceiver
(JD098B)
Ports
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U); Duplex: full only
A small form-factor pluggable (SFP) Gigabit LX-
BX10-U transceiver that provides a full duplex
Gigabit solution up to
10km on a single mode cable.
Connectivity Connector type
Physical characteristics Dimensions
Full configuration weight
Electrical characteristics Power consumption typical
Power consumption maximum
LC
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
0.04 lb. (0.02 kg)
0.8 W
1.0 W
Cabling
Maximum distance:
• 10km
Notes
Fiber type
TX 1310nm RX 1490nm
Single Mode
Services
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP X120 1G SFP LC BX 10-
D Transceiver
(JD099B)
Ports
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D); Duplex: full only
A small form-factor pluggable (SFP) Gigabit LX-
BX10-D transceiver that provides a full duplex
Gigabit solution up to
10km on a single mode cable.
Connectivity Connector type
Physical characteristics Dimensions
Full configuration weight
Electrical characteristics Power consumption typical
Power consumption maximum
LC
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
0.04 lb. (0.02 kg)
0.8 W
1.0 W
Cabling
Notes
Services
Maximum distance:
• Up to 10km
Fiber type Single Mode
TX 1490nm RX 1310nm
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 34
QuickSpecs
HP 5500 EI Switch Series
Accessory Product Details
HP X120 1G SFP LC SX
Transceiver
(JD118B)
Ports
Connectivity
Cabling
Services
1 LC 1000BASE-SX port
Connector type
LC
A small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550m on a Multimode fiber.
Wavelength
Physical characteristics Dimensions
Full configuration weight
Electrical characteristics Power consumption typical
850 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
0.04 lb. (0.02 kg)
0.8 W
Power consumption maximum
1.0 W
Maximum distance:
• FDDI Grade distance = 220m
• OM1 = 275m
• OM2 = 500m
• OM3 = Not Specified by standard
Cable length up to 550m
Fiber type Multi Mode
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP X120 1G SFP LC LX
Transceiver
(JD119B)
Ports
Connectivity
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Connector type
LC
A small form-factor pluggable (SFP) Gigabig LX transceiver that provides a full duplex Gigabit solution up to 550m on MMF or
10Km on SMF
Wavelength
Physical characteristics Dimensions
Full configuration weight
Electrical characteristics Power consumption typical
1300 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
0.04 lb. (0.02 kg)
0.8 W
Power consumption maximum
1.0 W
Cabling
Cable type:
Either single mode or multimode;
Services
Maximum distance:
• 550m for Multimode
• 10km for Singlemode
Fiber type Both
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 35
QuickSpecs
Services
HP 5500 EI Switch Series
Accessory Product Details
HP X120 1G SFP RJ45 T
Transceiver
(JD089B)
A small form factor pluggable (SFP) Gigabit
1000Base-T transceiver that provides a full duplex
Gigabit solution up to
100m on a Cat-5+ cable.
Ports
Connectivity
Cabling
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Connector type
RJ-45
Physical characteristics Dimensions
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4
cm)
Full configuration weight
0.07 lb. (0.03 kg)
Electrical characteristics Power consumption typical
0.8 W
Power consumption maximum
1.0 W
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
• 100m
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP 0.5 m Multimode OM3
LC/LC Optical Cable
(AJ833A)
Cabling
Notes
Cable type
:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber and designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 36
QuickSpecs
Accessory Product Details
Services
HP 1 m Multimode OM3
LC/LC Optical Cable
(AJ834A)
Cabling
Notes
Services
HP 5500 EI Switch Series
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Cable type
:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 37
QuickSpecs
Accessory Product Details
HP 2 m Multimode OM3
LC/LC Optical Cable
(AJ835A)
Cabling
Notes
Services
HP 5500 EI Switch Series
Cable type
:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m;
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 38
QuickSpecs
Accessory Product Details
HP 5 m Multimode OM3
LC/LC Optical Cable
(AJ836A)
Cabling
Notes
Services
HP 5500 EI Switch Series
Cable type
:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m;
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and
Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 39
QuickSpecs
Accessory Product Details
HP 15 m Multimode OM3
LC/LC Optical Cable
(AJ837A)
Cabling
Notes
Services
HP 5500 EI Switch Series
Cable type
:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m;
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 40
QuickSpecs
Accessory Product Details
HP 30 m Multimode OM3
LC/LC Optical Cable
(AJ838A)
Cabling
Notes
Services
HP 5500 EI Switch Series
Cable type
:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m;
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 41
QuickSpecs
Accessory Product Details
HP 50 m Multimode OM3
LC/LC Optical Cable
(AJ839A)
Cabling
Notes
Services
HP 5500 EI Switch Series
Cable type
:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m;
Maximum distance
:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 42
QuickSpecs
Accessory Product Details
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
1m Cable
(QK732A)
Notes
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
2m Cable
(QK733A)
Notes
Services
HP 5500 EI Switch Series
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 43
QuickSpecs
Accessory Product Details
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
5m Cable
(QK734A)
Notes
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
15m Cable
(QK735A)
Notes
Services
HP 5500 EI Switch Series
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 44
QuickSpecs
Accessory Product Details
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
30m Cable
(QK736A)
Notes
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
50m Cable
(QK737A)
Notes
Services
HP 5500 EI Switch Series
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 45
QuickSpecs
HP 5500 EI Switch Series
Accessory Product Details
HP RPS1600 Redundant
Power System
(JG136A)
Ports
8 redundant power supply ports
Restrictions: two -56V/25A DC(PoE); six -56V/8A DC(non-PoE)
Physical characteristics Dimensions
Weight
15.63(d) x 17.32(w) x 1.74(h) in. (39.7 x 44 x 4.42
cm)
14.11 lb. (6.4 kg)
Environment
Full configuration weight
16.75 lb. (7.6 kg)
Operating temperature
14°F to 122°F (-10°C to 50°C)
Operating relative humidity
5% to 95%
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
5% to 95%
Altitude
Acoustic
Electrical characteristics Voltage
Current
Idle power
up to 13,123 ft. (4 km)
Pressure: 53 dB; ISO 7779, ISO 9296
100-120/200-240 VAC
30/60 A
38 W
Maximum power rating
3550 W
RPS power
3200 W
PoE power
2800 W
Safety
Services
RPS
PoE
-55 V
-55 V
Frequency
Notes
50/60 Hz
Idle power is the actual power consumption of the device with no ports connected.
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules populated.
With one RPS1600 Power Supply, the PRS1600
Redundant Power System can provide 1600W power output; With two PRS1600 Power Supplies, the output power is 3200W.
CE Labeled; UL 60950-1; IEC 60950-1; ICES-003; FCC Part 15, Subpart B; EU
RoHS Compliant; EN 60950-1/A11; C-Tick; VCCI Class A; ROHS Compliance; EN
300386
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 46
QuickSpecs
HP 5500 EI Switch Series
Accessory Product Details
HP RPS1600 1600W AC
Power Supply
(JG137A)
Physical characteristics
Environment
Dimensions
8.19(d) x 4.96(w) x 1.63(h) in. (20.8 x 12.6 x 4.15
cm)
3.02 lb. (1.37 kg)
Weight
Operating temperature
14°F to 122°F (-10°C to 50°C)
Operating relative humidity
5% to 95%
Nonoperating/Storage temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity
Electrical characteristics Voltage
Services
5% to 95%
Current
100-120/200-240 VAC
15/30 A
Maximum power rating
1600 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules populated.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
To learn more, visit: www.hp.com/networking
© Copyright 2010-2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 13808 EMEA — Version 29 — March 19, 2014 Page 47
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project