Compaq Essential 615 User Manual Manual

Add to my manuals
40 Pages

advertisement

Compaq Essential 615 User Manual Manual | Manualzz
Multimedia
User Guide
Downloaded from LpManual.com Manuals
© Copyright 2009 Hewlett-Packard
Development Company, L.P.
Microsoft, Windows, and Windows Vista are
U.S. registered trademarks of Microsoft
Corporation.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: June 2009
Document Part Number: 533490-001
Downloaded from LpManual.com Manuals
Product notice
This user guide describes features that are
common to most models. Some features
may not be available on your computer.
Table of contents
1 Multimedia features
Identifying your multimedia components .............................................................................................. 2
Adjusting the volume ............................................................................................................................ 4
2 Multimedia software
Accessing your preinstalled multimedia software ................................................................................. 6
Installing multimedia software from a disc ............................................................................................ 6
3 Audio
Connecting external audio devices ...................................................................................................... 8
Checking your audio functions ............................................................................................................. 9
4 Video
Connecting an external monitor or projector ...................................................................................... 11
5 Optical drive
Identifying the installed optical drive ................................................................................................... 12
Using optical discs (CDs and DVDs) .................................................................................................. 13
Selecting the right disc (CDs and DVDs) ........................................................................................... 14
CD-R discs ......................................................................................................................... 14
CD-RW discs ..................................................................................................................... 14
DVD±R discs ..................................................................................................................... 14
DVD±RW discs .................................................................................................................. 14
LightScribe DVD+R discs .................................................................................................. 14
Playing music ..................................................................................................................................... 15
Watching a movie ............................................................................................................................... 16
Configuring AutoPlay .......................................................................................................................... 17
Changing DVD region settings ........................................................................................................... 18
Observing the copyright warning ........................................................................................................ 19
Copying a CD or DVD ........................................................................................................................ 20
Creating or “burning” a CD or DVD .................................................................................................... 21
Removing a CD or DVD ..................................................................................................................... 22
6 Webcam (select models only)
Webcam tips ....................................................................................................................................... 24
Adjusting webcam properties ............................................................................................................. 25
iii
Downloaded from LpManual.com Manuals
7 Troubleshooting
The optical disc tray does not open for removal of a CD or DVD ....................................................... 26
The computer does not detect the optical drive ................................................................................. 27
A disc does not play ........................................................................................................................... 28
A disc does not play automatically ..................................................................................................... 29
A DVD movie stops, skips, or plays erratically ................................................................................... 29
A DVD movie is not visible on an external display ............................................................................. 30
The process of burning a disc does not begin, or it stops before completion .................................... 30
A device driver must be reinstalled .................................................................................................... 31
Obtaining the latest HP device drivers ............................................................................... 31
Obtaining Microsoft device drivers ..................................................................................... 32
Using SoftPaq Download Manager .................................................................................................... 33
Index ................................................................................................................................................................... 34
iv
Downloaded from LpManual.com Manuals
1
Multimedia features
Your computer includes multimedia features that allow you to listen to music, watch movies, and view
pictures. Your computer may include the following multimedia components:
●
Optical drive for playing audio and video discs
●
Integrated speakers for listening to music
●
Integrated microphone for recording your own audio
●
Integrated webcam that allows you to capture and share video
●
Preinstalled multimedia software that allows you to play and manage your music, movies, and
pictures
●
Hotkeys that provide fast access to multimedia tasks
NOTE:
Your computer may not include all of the components listed.
The following sections explain how to identify and use the multimedia components included with your
computer.
1
Downloaded from LpManual.com Manuals
Identifying your multimedia components
The following illustration and table describe the multimedia features of the computer.
NOTE:
Refer to the illustration that most closely matches your computer.
Component
Description
(1)
Webcam light (select models only)
On: The webcam is in use.
(2)
Webcam (select models only)
Records video and captures still photographs.
(3)
Speaker
Produce sound.
(4)
Audio-out (headphone) jack
Produces sound when connected to optional powered stereo
speakers, headphones, ear buds, a headset, or television audio.
NOTE: When a device is connected to the headphone jack, the
computer speakers are disabled.
2
(5)
Internal microphone
Records sound.
(6)
Audio-in (microphone) jack
Connects an optional computer headset microphone, stereo array
microphone, or monaural microphone.
Chapter 1 Multimedia features
Downloaded from LpManual.com Manuals
Component
Description
(1)
Webcam light (select models only)
On: The webcam is in use.
(2)
Webcam (select models only)
Records video and captures still photographs.
(3)
Speaker
Produces sound.
(4)
Audio-out (headphone) jack
Produces sound when connected to optional powered stereo
speakers, headphones, ear buds, a headset, or television audio.
NOTE: When a device is connected to the headphone jack, the
computer speakers are disabled.
(5)
Internal microphone
Records sound.
(6)
Audio-in (microphone) jack
Connects an optional computer headset microphone, stereo array
microphone, or monaural microphone.
Identifying your multimedia components
Downloaded from LpManual.com Manuals
3
Adjusting the volume
You can adjust the volume using the following controls:
●
●
Computer volume hotkey—A combination of the fn key (1) and either the f9 (2), f11 (3), or f12 (4)
function key:
◦
To mute or restore volume, press fn+f9.
◦
To decrease volume, press fn+f11.
◦
To increase volume, press fn+f12.
Windows® volume control:
a.
Click the Volume icon in the notification area, at the far right of the taskbar.
b.
Increase or decrease the volume by moving the slider up or down. Click the Mute icon to mute
the volume.
– or –
a.
Right-click the Volume icon in the notification area, and then click Open Volume Mixer.
b.
In the Speakers column, increase or decrease the volume by moving the Volume slider up
or down. You can also mute the volume by clicking the Mute icon.
If the Volume icon is not displayed in the notification area, follow these steps to add it:
●
a.
Right-click in the notification area, and then click Properties.
b.
Click the Notification Area tab.
c.
Under System icons, select the Volume check box.
d.
Click OK.
Program volume control:
Volume can also be adjusted within some programs.
4
Chapter 1 Multimedia features
Downloaded from LpManual.com Manuals
2
Multimedia software
The computer includes preinstalled multimedia software. Some computer models also include additional
multimedia software on an optical disc.
Depending on the hardware and software included with the computer, the following multimedia tasks
may be supported:
●
Playing digital media, including audio and video CDs, audio and video DVDs, and Internet radio
●
Creating or copying data CDs
●
Creating, editing, and burning audio CDs
●
Creating, editing, and burning a video or movie to a DVD or video CD
CAUTION:
To prevent loss of information or damage to a disc, observe the following guidelines:
Before writing to a disc, connect the computer to a reliable external power source. Do not write to a disc
while the computer is running on battery power.
Before writing to a disc, close all open programs except the disc software you are using.
Do not copy directly from a source disc to a destination disc or from a network drive to a destination
disc. Instead, copy from a source disc or network drive to your hard drive, and then copy from your hard
drive to the destination disc.
Do not use the computer keyboard or move the computer while the computer is writing to a disc. The
write process is sensitive to vibration.
NOTE: For information about using software included with the computer, refer to the software
manufacturer's instructions that may be provided on disc, in the software Help, or on the software
manufacturer's Web site.
5
Downloaded from LpManual.com Manuals
Accessing your preinstalled multimedia software
To access your preinstalled multimedia software:
▲
Select Start > All Programs, and then open the multimedia program you want to use.
NOTE: Some programs may be located in subfolders.
NOTE: For details about using software included with the computer, refer to the software
manufacturer’s instructions, which may be provided with the software, on disc, or on the manufacturer’s
Web site.
Installing multimedia software from a disc
1.
Insert the disc into the optical drive.
2.
When the installation wizard opens, follow the on-screen instructions.
3.
Restart the computer if prompted to do so.
NOTE: For details about using software included with the computer, refer to the software
manufacturer’s instructions, which may be provided with the software, on disc, or on the manufacturer’s
Web site.
6
Chapter 2 Multimedia software
Downloaded from LpManual.com Manuals
3
Audio
Your computer enables you to use a variety of audio features:
●
Play music using your computer speakers and/or connected external speakers
●
Record sound using the internal microphone or connect an external microphone
●
Download music from the Internet
●
Create multimedia presentations using audio and images
●
Transmit sound and images with instant messaging programs
●
Stream radio programs (select models only) or receive FM radio signals
●
Create or “burn” audio CDs (select models only)
7
Downloaded from LpManual.com Manuals
Connecting external audio devices
WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety and
Environmental Notices.
To connect external devices such as external speakers, headphones, or a microphone, refer to the
information provided with the device. For best results, remember the following tips:
●
Be sure that the device cable is securely connected to the correct jack on your computer. (Cable
connectors are normally color-coded to match the corresponding jacks on the computer.)
●
Be sure to install any drivers required by the external device.
NOTE: A driver is a required program that acts like a translator between the device and the
programs that use the device.
8
Chapter 3 Audio
Downloaded from LpManual.com Manuals
Checking your audio functions
To check the system sound on your computer, follow these steps:
1.
Select Start > Control Panel.
2.
Click Hardware and Sound.
3.
Click Sound.
4.
When the Sound window opens, click the Sounds tab. Under Program, select any sound event,
such as a beep or alarm, and click the Test button.
You should hear sound through the speakers or through connected headphones.
To check the record functions of the computer, follow these steps:
1.
Select Start > All Programs > Accessories > Sound Recorder.
2.
Click Record and speak into the microphone. Save the file to your desktop.
3.
Open Windows Media Player and play back the sound.
NOTE: For best results when recording, speak directly into the microphone and record sound in a
setting free of background noise.
▲
To confirm or change the audio settings on your computer, right-click the Sound icon on the
taskbar, or select Start > Control Panel > Audio.
Checking your audio functions
Downloaded from LpManual.com Manuals
9
4
Video
Your computer enables you to use a variety of video features:
10
●
Watch movies
●
Play games over the Internet and offline
●
Edit pictures and video to create presentations
●
Connect external video devices
Chapter 4 Video
Downloaded from LpManual.com Manuals
Connecting an external monitor or projector
The external monitor port connects an external display device, such as an external monitor or a projector,
to the computer.
▲
To connect a display device, connect the device cable to the external monitor port.
NOTE: If a properly connected external display device does not display an image, press fn+f4 to
transfer the image to the device. Repeatedly pressing fn+f4 alternates the screen image between the
computer display and the device.
Connecting an external monitor or projector
Downloaded from LpManual.com Manuals
11
5
Optical drive
Depending on the type of optical drive and software installed in your computer, the optical drive plays,
copies, and creates CDs or DVDs.
Identifying the installed optical drive
▲
Select Start > Computer.
You will see a list of all the devices installed on your computer, including your optical drive. You may
have one of the following types of drives:
●
DVD-ROM Drive
●
DVD±RW SuperMulti Double-Layer LightScribe Drive
NOTE:
12
Some of the drives listed above may not be supported by your computer.
Chapter 5 Optical drive
Downloaded from LpManual.com Manuals
Using optical discs (CDs and DVDs)
An optical drive, such as a DVD-ROM drive, supports optical discs (CDs and DVDs). These discs store
information, such as music, photos, and movies. DVDs have a higher storage capacity than CDs.
Your optical drive can read standard CD and DVD discs.
NOTE: Some of the optical drives listed may not be supported by your computer. The listed drives are
not necessarily all of the supported optical drives.
Some optical drives can also write to optical discs as described in the following table.
Optical drive type
Write to CD-RW
Write to DVD±RW/R Write to DVD±RW
DL
Write label to
LightScribe CD or
DVD±RW/R
DVD-ROM Drive
No
No
No
No
DVD±RW SuperMulti DoubleLayer Drive with LightScribe
Yes
Yes
Yes
Yes
*Double-layer (DL) discs can store more data than single-layer discs. However, double-layer discs burned with this drive may
not be compatible with many single-layer DVD drives and players.
†LightScribe discs must be purchased separately. LightScribe creates a grayscale image similar to black-and-white
photography.
CAUTION: To prevent possible audio and video degradation, loss of information, or loss of audio or
video playback functionality, do not initiate Sleep or Hibernation while reading a CD or DVD, or writing
to a CD or DVD.
Using optical discs (CDs and DVDs)
Downloaded from LpManual.com Manuals
13
Selecting the right disc (CDs and DVDs)
CDs, used to store digital data, are also used for commercial audio recordings and are convenient for
your personal storage needs. DVDs are used primarily for movies, software, and data backup purposes.
DVDs are the same form factor as CDs but have a much higher storage capacity.
NOTE: The optical drive on your computer may not support all the types of optical discs discussed in
this section.
CD-R discs
Use CD-R (write-once) discs to create permanent archives and to share files with virtually anyone.
Typical uses include the following:
●
Distributing large presentations
●
Sharing scanned and digital photos, video clips, and written data
●
Making your own music CDs
●
Keeping permanent archives of computer files and scanned home records
●
Offloading files from your hard drive to free up disk space
After data is recorded, it cannot be erased or written over.
CD-RW discs
Use a CD-RW disc (a rewritable version of a CD) to store large projects that must be updated frequently.
Typical uses include the following:
●
Developing and maintaining large documents and project files
●
Transporting work files
●
Making weekly backups of hard drive files
●
Updating photos, video, audio, and data continuously
DVD±R discs
Use blank DVD±R discs to permanently store large amounts of information. After data is recorded, it
cannot be erased or written over.
DVD±RW discs
Use DVD±RW discs if you want to be able to erase or write over data that you saved earlier. This type
of disc is ideal for testing audio or video recordings before you burn them to a CD or DVD that cannot
be changed.
LightScribe DVD+R discs
Use LightScribe DVD+R discs for sharing and storing data, home videos, and photos. These discs are
read-compatible with most DVD-ROM drives and DVD video players. With a LightScribe-enabled drive
and LightScribe software, you can write data to the disc and then add a designer label to the outside of
the disc.
14
Chapter 5 Optical drive
Downloaded from LpManual.com Manuals
Playing music
1.
Turn on the computer.
2.
Press the release button (1) on the drive bezel to release the disc tray.
3.
Pull out the tray (2).
4.
Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up
over the tray spindle.
NOTE:
If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.
5.
Gently press the disc (3) down onto the tray spindle until the disc snaps into place.
6.
Close the disc tray.
7.
If you have not yet configured AutoPlay, as described in the section "Configuring AutoPlay," an
AutoPlay dialog box opens. It prompts you to select how you want to use the media content. Choose
Windows Media Player.
NOTE:
After you insert a disc, a short pause is normal.
If Sleep or Hibernation is initiated during playback of a disc, you may experience the following behaviors:
●
Your playback may be interrupted.
●
You may see a warning message asking if you want to continue. If this message is displayed, click
No.
●
You may need to restart the CD or DVD to resume playback.
Playing music
Downloaded from LpManual.com Manuals
15
Watching a movie
Your optical drive allows you to watch movies from a disc.
1.
Turn on the computer.
2.
Press the release button (1) on the optical drive bezel to release the disc tray.
3.
Pull out the tray (2).
4.
Hold the disc by the edges and position the disc label-side up over the tray spindle.
NOTE: If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.
5.
Gently press the disc (3) down onto the tray spindle until the disc snaps into place.
6.
Close the disc tray.
NOTE: After you insert a disc, a short pause is normal. If you have not selected a media player, an
AutoPlay dialog box opens. It prompts you to select how you want to use the media content.
16
Chapter 5 Optical drive
Downloaded from LpManual.com Manuals
Configuring AutoPlay
1.
Select Start > Control Panel > Play CDs or other media automatically.
2.
Confirm that the Use AutoPlay for all media and devices check box is selected.
3.
Click Choose a default, and then select one of the available options for each media type listed.
NOTE:
4.
Choose WinDVD to play DVDs.
Click Save.
NOTE:
For more information about AutoPlay, refer to Help and Support.
Configuring AutoPlay
Downloaded from LpManual.com Manuals
17
Changing DVD region settings
Most DVDs that contain copyrighted files also contain region codes. The region codes help protect
copyrights internationally.
You can play a DVD containing a region code only if the region code on the DVD matches the region
setting on your DVD drive.
CAUTION: The region settings on your DVD drive can be changed only 5 times.
The region setting you select the fifth time becomes the permanent region setting on the DVD drive.
The number of region changes remaining is displayed on the DVD Region tab.
To change settings through the operating system:
1.
Select Start > Computer > System properties.
2.
In the left pane, click Device Manager.
NOTE: Windows includes the User Account Control feature to improve the security of your
computer. You may be prompted for your permission or password for tasks such as installing
applications, running utilities, or changing Windows settings. Refer to Help and Support for more
information.
18
3.
Click the "+" sign next to DVD/CD-ROM drives.
4.
Right-click the DVD drive for which you want to change region settings, and then click
Properties.
5.
Make the desired changes on the DVD Region tab.
6.
Click OK.
Chapter 5 Optical drive
Downloaded from LpManual.com Manuals
Observing the copyright warning
It is a criminal offense, under applicable copyright laws, to make unauthorized copies of copyrightprotected material, including computer programs, films, broadcasts, and sound recordings. Do not use
this computer for such purposes.
CAUTION:
To prevent loss of information or damage to a disc, observe the following guidelines:
Before writing to a disc, connect the computer to a reliable external power source. Do not write to a disc
while the computer is running on battery power.
Before writing to a disc, close all open programs except the disc software you are using.
Do not copy directly from a source disc to a destination disc or from a network drive to a destination
disc.
Do not use the computer keyboard or move the computer while the computer is writing to a disc. The
write process is sensitive to vibration.
NOTE: For details about using software included with the computer, refer to the software
manufacturer’s instructions, which may be provided with the software, on disc, or on the manufacturer’s
Web site.
Observing the copyright warning
Downloaded from LpManual.com Manuals
19
Copying a CD or DVD
1.
Select Start > All Programs > Roxio > Creator Business.
2.
In the right pane, click Copy Disc.
3.
Insert the disc you want to copy into the optical drive.
4.
Click Copy at the bottom right of the screen.
Creator Business reads the source disc and copies the data to a temporary folder on your hard
drive.
5.
When prompted, remove the source disc from the optical drive and insert a blank disc into the drive.
After the information is copied, the disc you created is ejected automatically.
20
Chapter 5 Optical drive
Downloaded from LpManual.com Manuals
Creating or “burning” a CD or DVD
If your computer includes a CD-RW, DVD-RW, or DVD+/-RW optical drive, you can use software such
as Windows Media Player or Roxio Creator Business to burn data and audio files, including MP3 and
WAV music files. To burn video files to a disc, use Windows Movie Maker.
Observe the following guidelines when burning a CD or DVD:
●
Observe the copyright warning. It is a criminal offense, under applicable copyright laws, to make
unauthorized copies of copyright-protected material, including computer programs, films,
broadcasts, and sound recordings. Do not use this computer for such purposes.
●
Before burning a disc, save and close any open files and close all programs.
●
A CD-R or DVD-R is usually best for burning audio files because after the information is copied, it
cannot be changed.
●
Because some home and car stereos will not play CD-RWs, use CD-Rs to burn music CDs.
●
A CD-RW or DVD-RW is generally best for burning data files or for testing audio or video recordings
before you burn them to a CD or DVD that cannot be changed.
●
DVD players used in home systems usually do not support all DVD formats. Refer to the user guide
that came with your DVD player for a list of supported formats.
●
An MP3 file uses less space than other music file formats, and the process for creating an MP3
disc is the same as the process for creating a data file. MP3 files can be played only on MP3 players
or on computers with MP3 software installed.
To burn a CD or DVD, follow these steps:
1.
Download or copy the source files into a folder on your hard drive.
2.
Insert a blank disc into the optical drive.
3.
Select Start > All Programs and the name of the software you want to use.
4.
Select the kind of disc you want to create—data, audio, or video.
5.
Right-click Start > Explore and navigate to the folder where the source files are stored.
6.
Open the folder, and then drag the files to the drive that contains the blank disc.
7.
Initiate the burning process as directed by the program you have selected.
For specific instructions, refer to the software manufacturer's instructions. These instructions may be
provided with the software, on disc, or on the manufacturer's Web site.
Creating or “burning” a CD or DVD
Downloaded from LpManual.com Manuals
21
Removing a CD or DVD
1.
Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out the
tray (2) until it stops.
2.
Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it.
3.
22
Close the disc tray and place the disc in a protective case.
Chapter 5 Optical drive
Downloaded from LpManual.com Manuals
6
Webcam (select models only)
NOTE: The section describes features that are common to most models. Some features may not be
available on your computer.
Your computer includes an integrated webcam, located at the top of the display. With the preinstalled
software, you can use the webcam to take a photo, record a video, or make an audio recording. You
can preview the photo, video recording, or audio recording, and save it on your computer hard drive.
To access the webcam and HP Webcam software, select Start > All Programs > HP Webcam.
The webcam software enables you to experiment with the following features:
●
Video—Record and play back webcam video.
●
Audio—Record and play back audio.
●
Streaming video—Use with instant message software solutions that support UVC (Universal Video
Class) cameras.
●
Snapshots—Take still photos.
23
Downloaded from LpManual.com Manuals
Webcam tips
For optimum performance, observe the following guidelines while using the webcam:
●
Be sure that you have the latest version of an instant message program before starting a video
conversation.
●
The webcam may not work properly across some network firewalls.
NOTE: If you are having trouble viewing or sending multimedia files to someone on another LAN
or outside your network firewall, temporarily disable the firewall, perform the task you want to
perform, and then reenable the firewall. To permanently resolve the problem, reconfigure the
firewall as necessary, and adjust the policies and settings of other intrusion detection systems. For
additional information, contact your network administrator or IT department.
●
Whenever possible, place bright light sources behind the webcam and out of the picture area.
NOTE: For details about using the webcam, click the Help menu in the webcam software Help, or
select Start > Help and Support.
24
Chapter 6 Webcam (select models only)
Downloaded from LpManual.com Manuals
Adjusting webcam properties
You can adjust the following webcam properties:
●
Brightness—Controls the amount of light that is incorporated into the image. A higher brightness
setting creates a brighter image; a lower brightness setting creates a darker image.
●
Contrast—Controls the difference between lighter and darker areas on the image. A higher
contrast setting intensifies the image; a lower contrast setting maintains more of the original
information’s dynamic range but leads to a flatter image.
●
Hue—Controls the aspect of color that distinguishes it from another color (what makes a color red,
green, or blue). Hue is distinct from saturation, which measures the intensity of the hue.
●
Saturation—Controls the strength of color in the final image. A higher saturation setting creates a
bolder image; a lower saturation setting creates a more subtle image.
●
Sharpness—Controls the definition of edges in an image. A higher sharpness setting creates a
more defined image; a lower sharpness setting creates a softer image.
●
Gamma—Controls the contrast affecting the mid-level grays or midtones of an image. Adjusting
the gamma of an image allows you to change the brightness values of the middle range of gray
tones without dramatically altering the shadows and highlights. A lower gamma setting makes
grays look black, and makes dark colors even darker.
●
Backlight Compensation—Compensates in cases where a subject with a large amount of
background light would otherwise be obscured by blooming or silhouetting.
●
NightMode—Compensates for low-light conditions.
●
Zoom (select models only)—Adjusts the zoom percentage for taking photos or recording videos.
●
Horizontal or vertical—Rotates the image horizontally or vertically.
●
50Hz or 60Hz—Adjusts the shutter speed to achieve a video recording that does not flicker.
Customizable preset profiles for multiple lighting conditions compensate for the following lighting
conditions: incandescent, fluorescent, halogen, sunny, cloudy, night.
Adjusting webcam properties
Downloaded from LpManual.com Manuals
25
7
Troubleshooting
The following sections describe several common issues and resolutions.
The optical disc tray does not open for removal of a CD or
DVD
1.
Insert the end of a paper clip (1) into the release access in the front bezel of the drive.
2.
Press in gently on the paper clip until the disc tray is released, and then pull out the tray (2) until it
stops.
3.
Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it.
4.
26
Close the disc tray and place the disc in a protective case.
Chapter 7 Troubleshooting
Downloaded from LpManual.com Manuals
The computer does not detect the optical drive
If the computer does not detect the optical drive, use Device Manager to troubleshoot the device and
then update, uninstall, or disable the device driver.
To check your devices and drivers in Device Manager, follow these steps:
1.
Remove any discs from the optical drive.
2.
Select Start > Control Panel > System and Maintenance > Device Manager. If prompted by
User Account Control, click Continue.
3.
In the Device Manager window, click the plus sign (+) next to Disc Drives or DVD/CD-ROM
drives, unless a minus sign (-) is already showing. Look for an optical drive listing.
4.
Right-click the optical device listing to perform the following tasks:
●
Update the driver.
●
Uninstall the device.
●
Scan for hardware changes. Windows scans your system for installed hardware and installs
any required default drivers.
●
Click Properties to see if the device is working properly.
◦
Click Troubleshoot to fix problems.
◦
Click the Driver tab to update, disable, or uninstall drivers for this device.
The computer does not detect the optical drive
Downloaded from LpManual.com Manuals
27
A disc does not play
●
Save your work and close all open programs before playing a CD or DVD.
●
Log off the Internet before playing a CD or DVD.
●
Be sure that you insert the disc properly.
●
Be sure that the disc is clean. If necessary, clean the disc with filtered water and a lint-free cloth.
Wipe from the center of the disc to the outer edge.
●
Check the disc for scratches. If you find scratches, treat the disc with an optical disc repair kit
available at many electronics stores.
●
Disable Sleep mode before playing the disc.
Do not initiate Hibernation or Sleep while playing a disc. Otherwise, you may see a warning
message asking if you want to continue. If this message is displayed, click No. After you click No,
the computer may behave in either of the following ways:
◦
Playback may resume.
– or –
◦
●
The playback window in the multimedia program may close. To return to playing the disc, click
the Play button in your multimedia program to restart the disc. In rare cases, you may need
to exit the program and then restart it.
Increase system resources:
Turn off external devices such as printers and scanners. This practice frees up valuable system
resources and results in better playback performance.
Change desktop color properties. Because the human eye cannot easily tell the difference between
colors beyond 16 bits, you should not notice any loss of color while watching a movie if you lower system
color properties to 16-bit color, as follows:
28
1.
Right-click on a blank area of the desktop, and then select Personalize > Display Settings.
2.
Set Colors to Medium (16 bit).
Chapter 7 Troubleshooting
Downloaded from LpManual.com Manuals
A disc does not play automatically
1.
Select Start > Control Panel > Play CDs or other media automatically.
2.
Confirm that the Use AutoPlay for all media and devices check box is selected.
3.
Click Save.
A CD or DVD should now start automatically when it is inserted into the optical drive.
NOTE:
For more information about AutoPlay, refer to Help and Support.
A DVD movie stops, skips, or plays erratically
●
Check to be sure the disc is not scratched or damaged.
●
Clean the disc.
●
Conserve system resources by trying the following suggestions:
◦
Log off the Internet.
◦
Change the color properties of the desktop:
1. Right-click on a blank area of the computer desktop, and select Personalize > Display
Settings.
2. Set Colors to Medium (16 bit), if this setting is not already selected.
◦
Disconnect external devices, such as a printer, scanner, camera, or handheld device.
A disc does not play automatically
Downloaded from LpManual.com Manuals
29
A DVD movie is not visible on an external display
1.
If both the computer display and an external display are turned on, press fn+f4 one or more times
to switch between the 2 displays.
2.
Configure the monitor settings to make the external display primary:
a.
Right-click on a blank area of the computer desktop, and select Personalize > Display
Settings.
b.
Specify a primary display and a secondary display.
NOTE: When using both displays, the DVD image will not appear on any display designated as
the secondary display.
To get information about a multimedia question not covered in this guide, select Start > Help and
Support.
The process of burning a disc does not begin, or it stops
before completion
30
●
Be sure that all other programs are closed.
●
Turn off Sleep mode and Hibernation.
●
Be sure that you are using the right kind of disc for your drive. See your user guides for more
information about disc types.
●
Be sure that the disc is inserted properly.
●
Select a slower write speed and try again.
●
If you are copying a disc, save the information on the source disc to your hard drive before trying
to burn the contents to a new disc, and then burn from your hard drive.
●
Reinstall the disc-burning device driver located in the DVD/CD-ROM drives category in Device
Manager.
Chapter 7 Troubleshooting
Downloaded from LpManual.com Manuals
A device driver must be reinstalled
To reinstall a device driver, follow these steps:
1.
Remove any discs from the optical drive.
2.
Click Start and type device manager in the Start Search box. As you type, search results are
listed in the pane above the box.
3.
In the results pane, click Device Manager. If prompted by User Account Control, click Continue.
4.
In the Device Manager window, click the plus sign (+) next to next to the type of driver you want to
uninstall and reinstall (for example, DVD/CD-ROMs, Modems, and so on), unless a minus sign (-)
is already showing.
5.
Click a listed driver, and press the delete key. When prompted, confirm that you want to delete the
driver, but do not restart the computer. Repeat for any other drivers you want to delete.
6.
In the Device Manager window, click the Scan for hardware changes icon in the toolbar. Windows
scans your system for installed hardware and installs default drivers for anything requiring drivers.
NOTE: If you are prompted to restart the computer, save all open files, and then continue with
the restart.
7.
Reopen Device Manager, if necessary, and then verify that the drivers are once again listed.
8.
Try to use your device.
If uninstalling and reinstalling the default device drivers does not correct the problem, you may need to
update your drivers using the procedures in the following section.
Obtaining the latest HP device drivers
Follow either of the following procedures to obtain HP device drivers.
To use HP Update:
1.
Select Start > All Programs > HP > HP Update.
2.
On the HP Welcome screen, click Settings, and then select a time when the utility should check
for software updates on the Web.
3.
Click Next to immediately check for HP software updates.
To use the HP Web site:
1.
Open your Internet browser, and go to http://www.hp.com/support, and select your country or
region.
2.
Click the option for software and driver downloads, and then type your computer model number in
the product box.
3.
Press enter, and then follow the on-screen instructions.
A device driver must be reinstalled
Downloaded from LpManual.com Manuals
31
Obtaining Microsoft device drivers
You can obtain the latest Windows device drivers by using Microsoft® Update. This Windows feature
can be set to automatically check for and install updates for your hardware drivers, as well as for the
Windows operating system and other Microsoft products.
To use Microsoft Update:
32
1.
Open your Internet browser and go to http://www.microsoft.com, and click Security & Updates.
2.
Click Microsoft Update to get the latest updates for your computer operating system, programs,
and hardware.
3.
Follow the on-screen instructions to install Microsoft Update. If prompted by User Account Control,
click Continue.
4.
Click Change settings and select a time for Microsoft Update to check for updates to the Windows
operating system and other Microsoft products.
5.
If prompted to do so, restart your computer.
Chapter 7 Troubleshooting
Downloaded from LpManual.com Manuals
Using SoftPaq Download Manager
HP SoftPaq Download Manager (SDM) is a tool that provides quick access to SoftPaq information for
HP business computers without having to know the SoftPaq number. Using this tool, you can easily
search for SoftPaqs and then download and unpack them.
SoftPaq Download Manager works by reading and downloading, from the HP FTP site, a published
database file containing computer model and SoftPaq information. SoftPaq Download Manager allows
you to specify one or more computer models to determine which SoftPaqs are available for download.
SoftPaq Download Manager checks the HP FTP site for updates to the database and software. If
updates are found, they are downloaded and applied automatically.
To download SoftPaqs:
1.
Click Start > All Programs > HP > HP Softpaq Download Manager.
2.
When the SoftPaq Download Manager opens for the first time, a window is displayed asking if you
want to show only software for the computer you are using or to show the software for all supported
models. Select Show software for all supported models. If you have used HP Softpaq Download
Manager previously, go to Step 3.
a.
Select your operating system and language filters in the Configuration Options window. The
filters limit the number of options that are listed in the Product Catalog pane. For example, if
only Windows Vista® Business is selected in the operating system filter, the only operating
system that is displayed in the Product Catalog is Windows Vista Business.
b.
To add other operating systems, change the filter settings in the Configuration Options
window. Refer to the HP Softpaq Download Manager software Help for more information.
3.
In the left pane, click the (+) sign to expand the model list, and then select the model(s) of the
products you want to update.
4.
Click Find Available SoftPaqs to download a list of available SoftPaqs for the selected computer.
5.
Select from the list of available SoftPaqs, and then click Download Only if you have many SoftPaqs
to download, because the Softpaq selection and Internet connection speed determine how long
the download process will take.
If you have only one or two SoftPaqs to download and a high-speed Internet connection, click
Download & Unpack.
6.
Right-click Install SoftPaq in the SoftPaq Download Manager software application to install the
SoftPaq on the computer.
Using SoftPaq Download Manager
Downloaded from LpManual.com Manuals
33
Index
A
audio devices, connecting
external 8
audio features 7
audio functions, checking 9
audio-in (microphone) jack 2
audio-in (microphone) jack,
identifying 3
audio-out (headphone) jack 2
audio-out (headphone) jack,
identifying 3
AutoPlay 17
C
CD
burning 21
copying 20
inserting 15
protecting 5
removing 22
writing to 5
CD drive 12
checking audio functions 9
copyright warning 19
D
device drivers
HP 31
Microsoft 32
reinstalling 31
drives
CD 12
DVD 12
DVD-ROM 13
DVD±RW SuperMulti DoubleLayer Drive with
LightScribe 13
optical 12
DVD
burning 21
34
Index
Downloaded from LpManual.com Manuals
changing region setting
copying 20
inserting 15
protecting 5
removing 22
writing to 5
DVD region settings 18
18
E
earbuds 2
external audio devices,
connecting 8
external monitor port 11
H
headphone (audio-out) jack 2
headphones 2
hotkeys
volume decrease 4
volume increase 4
volume mute 4
I
internal microphone,
identifying 2, 3
issues, resolving 26
J
jacks
audio-in (microphone) 2
audio-out (headphone) 2
M
microphone, internal 2
monitor, connecting 11
movie, watching 16
multimedia components,
identifying 2
multimedia software
accessing 6
O
optical disc
inserting 15
removing 22
writing to 5
optical drive
protecting 5
P
ports
external monitor 11
projector, connecting 11
R
region codes, DVD 18
S
SoftPaqs, downloading 33
speaker, identifying 2, 3
T
tips, webcam 24
troubleshooting
autoplay 29
device drivers 31
disc burning 30
disc does not play 28
DVD movie play 29
external display 30
optical disc tray 26
optical drive detection 27
U
using the webcam
23
V
video, using 10
volume, adjusting 4
W
webcam
adjusting properties 25
tips 24
using 23
webcam light, identifying 2, 3
webcam, identifying 2, 3
Index
Downloaded from LpManual.com Manuals
35
Downloaded from LpManual.com Manuals

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement