Zanussi ZHC 700 Technical information

INSTRUCTION BOOKLET
COOKER HOOD
ZHC 950
Thank you for buying a Zanussi product.
To enable you to use your appliance effectively and safely, please read this instruction
book carefully before using the appliance and retain for future reference. If you require
guidance in the use of the appliance or require further information on Zanussi Products,
please contact our Customer Care Department.
Customer Care Department
Zanussi
55 - 77 High Street
Slough
Berkshire
SL1 1DZ
Tel: 08705 727 727
To register ownership, please ensure you complete and return the guarantee card
supplied with the appliance.
For the User
For the Installer
Important Safety Information
Technical Information
Electrical Connection
Your Appliance
Operating Instructions
Cooker Hood Controls
To Operate
Recirculation
Extraction
Maintenance and Cleaning
External Cleaning
Metal Grease Filters
Charcoal Filters
To Remove/Replace the Charcoal
Filters
Changing the Light Bulb
Something Not Working
Electrical Requirements
Electrical Connection
Installing the Cooker Hood
Installation Requirements
Unpacking
Clearance Heights
Fitting the Wall Brackets
Fitting the Canopy Hood
Venting
Recirculation
Fitting the Chimney Stack
To register ownership, please ensure you
complete and return the guarantee card
supplied with the appliance.
Service and Spare Parts
Guarantee Conditions
Guide to use the instruction book
The following Symbols will be found in the text to guide you through the instruction book
Safety instructions
Step by step instructions
1
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
IMPORTANT SAFETY INFORMATION
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
These warnings are provided in the interests of safety. Ensure that you understand
them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the
Customer Care Department.
•
•
Installation
•
This hood must be installed in accordance
with the installation instructions and all
measurements must be adhered to.
•
If the cooker hood is installed for use above
a gas appliance then the provision for
ventilation must be in accordance with the
Gas Safety Codes of Practice BS.6172,
BS.5440 and BS.6891 (Natural Gas) and
BS.5482 (LP Gas) 1994, the Gas Safety
(Installation & Use) Regulations, the
Building Regulations issued by the
Department of the Environment, the
Building Standards (Scotland)
(Consolidated) Regulations issued by the
Scottish Development Department.
•
•
The ducting system for this appliance must
not be connected to any existing ventilation
system which is being used for any other
purpose.
•
Do not install above a cooker with a highlevel grill.
Any installation work must be undertaken
by a qualified electrician or a competent
person.
•
•
•
•
The fan motor of this cooker hood
incorporates a cut-out device which will
operate if the cooker hood is installed
below the minimum height recommended
under the section ‘Clearance Height’, or if
the motor becomes overheated. If the cutout device is activated, switch off the fan
motor and allow the cooker hood to cool.
The cut-out device will reset itself when the
fan motor has cooled significantly.
•
It is dangerous to alter the specifications or
modify this product in any way.
•
When installed between adjoining wall
cabinets the wall cabinets must not
overhang the hob.
•
If the room where the cooker hood is to be
used contains a fuel burning appliance
such as a central heating boiler then its flue
must be of the room sealed or balanced
flue type.
•
If other types of flue or appliances are fitted
ensure that there is an adequate supply of
air to the room.
During Use
This product is for domestic use only.
•
Never leave frying pans unattended during
use as overheated fats and oils might
catch fire.
•
Never do flambé cooking under this cooker
hood.
•
Do not leave naked flames under the
cooker hood.
•
•
•
2
Child Safety
This appliance is designed to be operated
by adults. Children should not be allowed
to tamper with the appliance.
Maintenance and Service
This appliance can be a hazard if the
grease filters and charcoal filters are not
cleaned and replaced as recommended.
Under no circumstances should you
attempt to repair the appliance yourself.
Repairs carried out by inexperienced
persons may cause injury or more serious
malfunction. Refer to your local Zanussi
Service Force Centre. Always insist on
genuine spare parts.
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
YOUR APPLIANCE
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
6
63
12
0
41
26
46
MIN.870-MAX.1200
740
81
300
0
42
0
52
6
530
598-89
8
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
OPERATING INSTRUCTIONS
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
This cooker hood is designed to extract
unpleasant odours from the kitchen, it
will not extract steam.
Cooker Hood Controls
The cooker hood functions are controlled by
four push button switches located centrally in
the control fascia.
L
S
V1
V2
V3
L
Turns the worktop lighting On and Off
Mains light - illumination indicates fan
motor is running
Turns the fan motor On and Off at low
speed, suitable for one pan or when
simmering.
Medium fan speed, suitable for use
when cooking with a number of pots
and pans.
Maximum fan speed, suitable for
cooking foods with strong odours.
V1
3
V2
V3
To Operate
Select the required fan speed and light if required.
The appliance can be installed to recirculate or
extract contaminated air. The cooker hood is more
effective when used in the extraction mode.
Recirculation
The cooker hood is supplied specified for use in the
recirculation mode with the charcoal filter fitted.
In the recirculation mode the contaminated air is
passed through the charcoal filters to be purified
and recirculated into the kitchen through the
recirculation grilles in either side of the chimney
stack.
Extraction
In the extraction mode the contaminated air enters
the cooker hood passing through the grease filters
and is passed out through the ducting into the
atmosphere.
To obtain the best performance when cooking it is
advisable to switch the cooker hood on for a few
minutes before you start cooking and leave it
running for about 15 minutes after finishing.
When used in the extraction mode the
charcoal filters are not required.
Never do flambé cooking under this
cooker hood.
Never leave frying pans unattended during
use as overheated fats and oils can catch
fire.
Do not leave naked flames under the cooker
hood.
Ensure heating areas on your hob are
covered with pots and pans when using the
hob and cooker hood simultaneously.
4
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
MAINTENANCE AND CLEANING
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
Before carrying out any maintenance or
cleaning isolate the cooker hood from the
mains supply.
The cooker hood must be kept clean, as a
build up of grease or fat can be a fire
hazard.
External Cleaning
Wipe the cooker hood frequently with warm soapy
water using a mild detergent.
Never use scouring pads or abrasive
cleaners.
Never use excessive amounts of water
when cleaning particularly around the
control panel.
Metal Grease Filters
The grease filters absorb grease and dust during
cooking to help keep the cooker hood clean inside.
Cleaning
The filters must be washed once every
month, using a normal household
detergent; their compact dimension also
enables them to be washed in a
dishwasher. Allow to dry completely
before replacing.
Removing and replacing the filters
Remove the filters one at a time, press
against the metal actuator to release the
spring catch as illustrated. When
replacing, ensure that the handles face
outwards.
Charcoal Filter
In the recirculation mode the charcoal filter
absorbs smells and unwanted odours.
The charcoal filter cannot be cleaned or
regenerated, and must be replaced approximately
every 4 months, or more frequently if the hood is
subjected to heavy usage.
Replacing the charcoal filter
First remove the metal grease filters.
Remove the saturated activated charcoal
filter by releasing the fixing hooks as
illustrated.
5
Position the new charcoal filter in the
position marked and while holding the
filter replace the fixing hooks as
illustrated.
This appliance can be a possible fire
hazard if the grease and charcoal
filters are not cleaned and replaced as
recommended.
Changing the Light Bulb
Remove the screw fixing the lighting
support.
Pull the lighting support downwards.
Remove the light bulb by unscrewing it
anticlockwise.
Insert the new light bulb into the lighting
support and screw it clockwise taking
care not to overtighten the light bulb.
If one of the light bulbs has failed to function
check that the lamps is fully screwed into the
lighting support. If lamp failure has occurred
then it should be replaced with a 40W clear
cylindrical lamp with an E14 screw cap.
Replacement filters and light bulbs can
be obtained from your local Service
Force Centre.
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
SOMETHING NOT WORKING
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
If, having followed these instructions carefully, your cooker hood fails to work properly please
carry out the following checks.
Solution
Symptom
The cooker hood will not start
•
Check the hood is connected to the
electricity supply.
•
Make sure the switch is in the ‘ON’ position.
The cooker hood is not working effectively •
The cooker hood has switched off during
operation
If after all these checks, the fault persists,
contact your local Service Force Centre, quoting
the model and serial number.
Please note that it will be necessary to provide
proof of purchase for any in-guarantee service
calls.
The fan speed is set high enough for the
task.
•
•
The grease filter is clean.
•
If set up for recirculation, check that the
charcoal filter is still effective.
•
If set up for extraction, check that the
ducting outlets are not blocked.
•
•
The safety cut-out device has been tripped.
The kitchen is adequately vented to allow
the entry of fresh air.
Turn off the hob and then wait for the
device to reset.
In-guarantee customers should ensure
that the above checks have been made
as the engineer will make a charge if
the fault is not a mechanical or electrical
breakdown.
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
SERVICE AND SPARE PARTS
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
If you require an engineer or spare parts
contact your local Service Force Centre by
telephoning:
08705 929929
Your telephone call will be routed to your local
Service Force Centre.
For general assistance with your appliance or
for further information on Zanussi products
please contact our Customer Care Department at
the address below or visit our website at:
www.zanussi.co.uk
Customer Care Department
Zanussi
55 - 77 High Street
Slough
Berkshire
SL1 1DZ
Telephone: 08705 727 727*
* calls to this number may be recorded for
training purposes.
7
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
GUARANTEE CONDITIONS
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
We, Zanussi, undertake that if within twenty four months of the date of the purchase this Electrolux
built-in product or any part thereof is proved to be defective by reason only of faulty workmanship or
materials, the company will, at our option repair or replace the same FREE OF ANY CHARGE for
labour, materials or carriage on condition that:
•
The appliance has been correctly installed and used only on the electrical supply stated on the
rating plate.
•
The appliance has been used for normal domestic purposes only, and in accordance with the
manufacturer’s operating and maintenance instructions.
•
The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any
person not authorised by us.
•
•
All service work under this guarantee must be undertaken by a Zanussi Service Force Centre.
Any appliance or defective part replaced shall become the property of this company.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available
outside these hours in which case a premium will be charged.
EXCLUSIONS
This Guarantee does not cover:
•
Damage or calls resulting from transportation, improper use or neglect, the replacement of any
lamps or removable parts of glass or plastic.
•
Costs incurred for calls to put right appliances improperly installed or calls to appliances outside
the United Kingdom.
•
Appliances found to be in use within a commercial environment, plus those which are the subject
of rental agreements.
• Products of Zanussi manufacture which are not marked by Zanussi.
This guarantee is in addition to your statutory and legal rights.
ZANUSSI EUROPEAN GUARANTEE
If you should move to another country within Europe then your guarantee moves with you to your new
home subject to the following qualifications:
•
•
The guarantee starts from the date you first purchased the product.
•
•
•
This guarantee relates to you and cannot be transferred to another user.
The guarantee is for the same period and to the same extent for labour and parts as exists in the
new country of use for this brand or range of products.
Your new home is within the European Community (EC) or European Free Trade Area.
The product is installed and used in accordance with our instructions and is only used
domestically, i.e. a normal household.
Before you move please contact your nearest Customer Care Centre, listed below, to give
them detailsof your new home. They will then ensure that the local Service Organisation is
aware of your move and able to look after you and your appliances.
France
Germany
Italy
Sweden
United Kingdom
Senlis
Nurnberg
Pordenone
Stockholm
Slough
+33 (0)3 44 62 22 22
+49 (0)911 323 2600
+39 (0)1678 47053
+46 (0)20 78 77 50
+44 (0)1753 219897
8
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
INSTALLATION INSTRUCTIONS
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical information
DIMENSIONS
ELECTRICAL SUPPLY
SUITABLE FOR INSTALLATION ABOVE:
HEIGHT OF CANOPY: (incl glass visor)
HEIGHT OF CHIMNEY: (UPPER SECTION)
(LOWER SECTION)
52mm
465mm
740mm
WIDTH OF CANOPY:
DEPTH OF CANOPY:
898mm
520mm
(incl glass visor)
(incl glass visor)
VOLTAGE:
(~50Hz)
POWER CONSUMPTION:
FAN MOTOR:
LAMPS:
(2 x40W)
220-240V
230W
150W
80W
ELECTRIC HOB:
GAS HOB:
SLOT-IN ELECTRIC COOKER:
SLOT-IN GAS COOKER:
7KW (MAX)
10KW (MAX)
12.4KW (MAX)
13.5KW (MAX)
Note: CE Marking certifies that this appliance complies with the
requirements laid down in EEC directive 89:336 (Electromagnetic
compatibility) and subsequent modifications and Low Votage directive
72/23/E.
THIS APPLIANCE MUST BE EARTHED
Electrical Requirements
Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical Connection
Before connecting to the mains supply ensure
that the mains voltage corresponds to the
voltage on the rating plate inside the cooker
hood.
This appliance is fitted with a 3 core mains
cable and must be permanently connected to
the electricity supply via a double-pole switch
having 3mm minimum contact gap on each
pole. A Switched Fuse Connection Unit to
BS.1363 Part 4, fitted with a 3 Amp fuse, is a
recommended mains supply connection
accessory to ensure compliance with the
Safety Requirements applicable to fixed
wiring instructions.
This appliance conforms to BS.800:1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television
interference.
9
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
INSTALLING THE COOKER HOOD
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
15
14.1
7.3
12a 7.2.1
11
9
2.1
12c
2
2.2
11
12a
1
Please ensure that when the appliance
is installed it is easily accessible to an
engineer in the event of a breakdown.
All installations must comply with the
local authorities requirements for the
discharge of exhaust air.
Incorrect installation may affect the
safety of this cooker hood.
Installation Requirements
Before installation check that the wall
to which the cooker hood is to be
fitted for electric cables, water pipes
and gas.
This cooker hood is designed to be fixed to
any vertical surface over a cooking area, and
can be used in the extraction (ducted to the
outside) or recirculation mode.
The installation work must be undertaken by a
qualified and competent person.
The manufacturer disclaims any responsibility for
damage due to incorrect installation of the cooker
hood or if the hood is not installed in compliance
with relevant regulations controlling this type of
installation.
Unpacking
The hood is supplied with the following
components for installation as illustrated.
Item Qty
Description
1
1
Hood body, complete with:
Controls, lighting, blower and filters
2
2.1
2.2
3.
9
14.1
1
1
1
1
1
2
15
7.2.1
7.3
11.
12a
12c
1
2
1
6
6
6
1
10
Telescopic chimney comprising:
Upper section
Lower section
Ø120-125mm Ducting collar
Ø150-120mm Ducting spigot
Recirculation outlet ducting
extension
Recirculation outlet connection
Upper chimney fixing brackets
Reciruation outlet support
Rawl plugs
4.2x44.4mm wall fixing screws
2.9x9.5mm chimney fixing screws
Instruction Manual
Clearance Heights
The cooker hood is designed to be fitted over a
cooking appliance at the clearance heights stated,
providing the maximum output of the appliance
beneath does not exceed the maximums quoted in
the Technical Specifications.
If the output of the appliance below the cooker
hood exceeds the maximum outputs quoted,
please refer to the cooker manufacturer’s
installation instructions.
A minimum clearance height of 650mm (25½ins)
is required when installed above a built-in electric
hob, or 700mm (27½ins) when installed above a
built-in gas hob.
A minimum clearance height of 685mm (27ins) is
required when installing above a slot-in electric
cooker, or 787mm (30½ins) when installed above
a slot-in cooker.
When installed between adjoining wall cabinets,
the wall cabinets must not overhang the hob and
the distance between the underside of the cabinet
and the worktop must be 450mmm (17¾ins), a
gap of 50mm (2ins) must be maintained either
side of the hob.
This cooker hood must not be installed
above a cooking appliance with a high
level grill.
The hood can be installed above these heights
but for optimum performance it should be installed
at the distances quoted for the appropriate heat
source.
11
1÷2
11
X
7.2.1
116 116
650 min.
306
12a
Fitting the Wall Brackets
Draw a vertical line on the wall, from the
centre of the cooking appliance up to the
ceiling, or as high as is practical using a
spirit level and mark pen. This is to
ensure the correct vertical alignment of
the appliance.
Draw a horizontal line through the
vertical at 650mm above the hob.
Place the first bracket item 7.2.1 on the
wall 1 or 2mm from the ceiling or the
upper limit as shown aligning the notch in
the centre with the vertical line.
Mark the wall bracket hole centres on
the wall ready for drilling.
Place the second bracket item 7.2.1 on
the wall at X below the first bracket as
shown aligning the notch in the centre
with the vertical line.
(X is determined by the height of the
upper chimney supplied).
Mark the wall bracket hole centres on
the wall ready for drilling.
Draw a horizontal line through the
vertical at 306mm above the hob and
mark two hole centres at 116mm either
side of the vetical line.
Drill the holes for the fixing screws using
an 8mm masonry drill and insert the 6
rawl plugs item 11.
12
Fix the lower bracket item 7.2.1 using
two 4.2x44.4 wall fixing screws item
12a.
Fix the upper fixing bracket item 7.2.1
and the recirulation outlet support item
7.3 together using two 4.2x44.4mm
wall fixing screws item 12a as
illustrated.
Insert two 4.2x44.4mm wall fixing
screws item 12a into the two holes
116mm either side of the vertical line
and tighten leaving a space between
the underside of the screwhead and
the wall of 5-6mm.
Note: If the hood is to be
installed onto a hollow
construction or plaster or
partition board wall then special
fixing screws will be required
(not supplied).
Fitting the Hood Body
Before starting to fix the hood body,
tighten the two screws Vr located on
the top of the hood body.
Vr
Hook the hood body onto the two
4.2x44.4mm screws item 12a.
Fully tighten the screws item 12a.
Using a screw driver and spirit level,
adjust the screws item Vr until the
hood body is level.
12a
Extraction
The cooker hood is more effective when used
in the extraction mode (ducted to the outside).
Venting kits may be purchased through
your retailer or DIY store, and must be
ducted to an outside vent of Ø125mm (5”)
or Ø150mm (6”).
The ducting used must be manufactured
from fire retardent material conforming to the
relevant British Standard or DIN 4102-B1.
When the cooker hood is ducted to the outside
the charcoal filter must be removed.
Recirculation
The cooker hood is supplied specified for use in
the recirculation mode, with the charcoal filter
fitted.
In the recirculation mode contaminated air is
passed through the charcoal filter to be purified
and recirculated into the kitchen through the
grille outlets on either side of the chimney.
14.1
To assemble the recirculation duct, place the
recirculation outlet connection item 15 into the
support item 7.3.
15
Insert the extension ducts item 14.1 into either
side of the recirculation outlet item 15 ensuring
the connections are vertically and horizontally
aligned with the outlets in the chimney.
ø 150
Connect the recirculation oulet item 15 to the
outlet on top of the hood body using either a
piece of Ø125mm or Ø150mm flexible or rigid
pipe.
Rigid pipe is strongly recommended and should
be used where possible as this will ensure the
best performance while lowering noise.
13
Extraction
The charcoal filter is not required in this mode
and should be removed.
Ducting
The ducting used must be Ø150mm (6ins), or
Ø125mm (5ins) in diameter.
If possible duct through the wall immediately
above the hood body.
For the best performance use the shortest
possible duct run and the minimum number of
bends.
Where flexible ducting is fitted it should not be
turned through very tight bends as this may
impair the performance of the hood.
It is recommenmded a maximum length of 3
metres, to be installed, to be reduced 1 metre for
each 90o bend installed in the ducting run.
If the distance is greater than 3 metres the
efficency of the hood could be impaired.
The diameter of the ducting spigot on the top of
the hood body item 1 is Ø150mm (6”).
When using Ø125mm (5”) ducting it will be
necessary to install the ducting adapter item 9 to
the Ø150mm (6”) outlet on the top of the hood
body and the Ø120mm to 125mm ducting collar
item 3 (supplied).
If the room where the cooker hood is to
be used contains a fuel burning appliance
such as a central heating boiler, then its
flue must be of the room sealed or
balanced flue type.
ø 150
ø 120
9
If other types of flue or appliances are
fitted ensure that there is an adequate
supply of air to the room.
The cooker ducting (extraction mode)
must never be connected to central
heating flues, radiators or water heaters
etc.
Electrical Connection and Working
Test
Before fitting the chimney to the canopy make
the electrical connection as described in the
section titled “ELECTRICAL CONNECTION”.
When the electrical connection has been made,
test the three speed fan and worktop
illumination.
14
Fitting the Chimney Stack
7.2.1
The chimney consists of two sections.
The lower chimney measures 740mm
and the upper chimney (with the
recirculation grilles on either side)
measures 465mm. The overall installed
measurement is min. 870 - max 1200mm.
UPPER CHIMNEY
To fit the upper chimney section item 2.1
expand the chimney slightly to allow it to
be fitted over the brackets item 7.2.1 as
illustrated.
When installed in the recirculation mode
ensure that the recirculation ducting
outlet extension pieces item 14.1 align
correctly with the outlet grilles in the
chimney.
12c
2.1
2
2.2
12c
Secure the sides of the chimney to the
brackets using the four screws item
12c (2.9x9.5mm) provided, as illustrated.
LOWER CHIMNEY
To fit the lower chimney section item 2.2
expand the chimney slightly to allow it to
be fitted over the upper chimney item
2.1 and the hood body item 1 as
illustrated.
Secure the sides of the chimney to the
hood body using the two screws item
12c (2.9x9.5mm) provided, as illustrated.
15
© Electrolux plc 2002
436001681 01 - 030210