advertisement
3300 CITELlink Gateway for Meridian 1 Series Phones
M3902 Phone User Guide
NOTICE
The information contained in this document is believed to be accurate in all respects but is not warranted by Mitel Networks™ Corporation (MITEL®). The information is subject to change without notice and should not be construed in any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its affiliates and subsidiaries assume no responsibility for any errors or omissions in this document. Revisions of this document or new editions of it may be issued to incorporate such changes.
Nothing in this document may be reproduced in any manner, whether wholly or in part for any use whatsoever, without written permission from Mitel Networks Corporation.
Mitel Networks is a trademark of Mitel Networks Corporation.
Nortel Networks and Meridian are trademarks of Nortel Networks Corporation.
CITELlink is a trademark of Citel Technologies Ltd.
Other product names mentioned in this document may be trademarks of their respective companies and are hereby acknowledged.
3300 Integrated Communications Platform
M3902 Phone User Guide
Release 5.2
December2004
®, ™ Trademark of Mitel Networks Corporation
© Copyright 2004, Mitel Networks Corporation
All rights reserved
Contents
About Your Phone
3
M3902 Phone User Guide
4
About Your Phone
About Your Phone
The Mitel® 3300 CITELlink Gateway allows your Nortel Networks™ Meridian 1 phone to work on a Mitel 3300 Integrated Communications Platform (3300 ICP).
When used with a 3300 ICP, your M3902 phone has 11 fixed-function keys (SUPERKEY,
(Program), (Program), (Program), (Program), (Program),
(Program), (Program), DOWN ARROW, (Volume Up), (Volume Down)), and three personal keys. Key 13 (see illustration below) is always your Prime Line; the remaining personal keys can be programmed as:
•
Features keys (for example, Swap). Only the administrator can program feature keys.
•
Speed Call keys You can program speed call keys from your phone.
•
Line Appearances. Only the administrator can program line appearances.
Your phone also features display-assisted selection of features and on-hook dialing.
Phone buttons
Button Number Description
2 Superkey
3 Previous
4 Handsfree
5 Mute
6 Cancel
7 Hold
8 Transfer
9 Message
10 Program
12 Next
5
M3902 Phone User Guide
Phone status indicators
When line is the indicator is
Idle Off
Busy On
On hold at your set
On Hold at another set
Flashing rapidly
Flashing rapidly
Conventions
The following conventions are used in this user guide:
•
Fixed-function keys are identified by bold uppercase letters (for example,
SUPERKEY).
•
Text that appears on the display is identified by double quotes (for example,
"Language?").
Using Your Meridian 1 Phone with the 3300 CITELlink Gateway
Please note the following differences in the way your phone now operates:
•
You can program speed call numbers as well as enable/disable features using
SUPERKEY. To navigate through the features, use the * and # keys.
•
Some features require you to dial a feature access code. You can use feature access codes whenever you have dial tone. The feature access codes in this user guide may be different from the ones programmed in your system. Ask your
Administrator for the list of feature access codes you can use.
•
When you have a message (including new voice mail messages), "Message" appears on the display, and the message indicator is lit.
Tips for Your Comfort and Safety
Don't cradle the handset!
Prolonged use of the handset can lead to neck, shoulder, or back discomfort, especially if you cradle the handset between your ear and shoulder.
Protect your hearing
Your phone has a control for adjusting the volume of the handset receiver. Because continuous exposure to loud sounds can contribute to hearing loss, keep the volume at a moderate level.
6
Customizing Your Phone
Customizing Your Phone
Ringer Control
To adjust the Ringer Volume while the phone is ringing:
•
Press or .
To adjust the Ringer Volume or Pitch while the phone is idle:
1. Press SUPERKEY.
4. To adjust the ringer pitch, press * (Yes). To adjust the ringer volume, press # (No), then * (Yes).
5. Press or until you hear the desired ringer pitch/volume.
7. Press SUPERKEY.
Handset Receiver Volume Control
To adjust the Handset Receiver Volume when you are using the handset:
•
Press or .
Speaker Volume Control
To adjust the Speaker Volume when making an on-hook call or when listening to background music:
•
Press or .
Display Contrast Control
To adjust the Display Contrast while your phone is idle:
•
Press DOWN ARROW.
7
M3902 Phone User Guide
Feature Keys
To display information about a key:
2. Press a personal key.
To re-program a personal key:
4. Press a personal key that isn't a line key.
Language Change
To change the display language:
1. Press SUPERKEY.
8
Making and Answering Calls
Making and Answering Calls
Make a call
1. Lift the handset.
2. If you want to use a Non-Prime Line, press a Line Appearance key.
3. Do one of the following:
•
Dial the number.
•
Press a Speed Call key.
Answer a call
•
Lift the handset.
- or -
Press the flashing Line appearance key and lift the handset.
Redial
To redial the last number that you manually dialed:
1. Lift the handset.
Redial - Saved Number
To save the last number that you manually dialed:
1. Lift the handset.
To Redial a saved number:
1. Lift the handset.
9
M3902 Phone User Guide
Speed Call Keys
You may use Speed Call Keys to make a call or to send a string of digits during a call
(press a Speed Call Key during a call to send a multi-digit password, for instance).
To dial a stored Speed Call number:
3. Lift the handset.
4. Press a Speed Call key.
To store a Speed Call number:
2. Press a personal key that isn’t a line key.
5. Do one of the following:
•
To enter a new number, dial the number. Press pause during dialing; press
between digits to create a
more than once to lengthen the pause.
•
To enter a trunk flash, press
. (See "Call Forward - Remote" on page 15 for
more information about the use of this feature.)
7. Press the selected personal key.
8. If you want to make the number private, press * (Yes). Otherwise, press # (No). number.
Speed Call - Personal
Note: Personal Speed Call lists must be configured by the Administrator.
To store a personal Speed Call number:
1. Lift the handset.
3. Enter an index number between 00 and 09.
4. Dial the number to be stored.
To dial a stored personal Speed Call number:
1. Lift the handset.
10
Making and Answering Calls
3. Enter an index number between 00 and 09.
Handsfree Operation
To use Handsfree Operation to make calls:
1. If you want to use a Non-Prime Line, press a Line Appearance key (the indicator turns on).
2. Dial the number.
3. Communicate by using the speaker and the microphone.
To use Handsfree Operation to answer calls:
1. Press the flashing line key (the indicator turns on).
2. Communicate by using the speaker and the microphone.
To hang up while using Handsfree Operation:
•
Press .
To temporarily disable the microphone during Handsfree Operation:
•
Press (the indicator flashes).
To re-enable the microphone and return to the conversation:
•
Press (the indicator turns off).
To disable Handsfree Operation:
•
Lift the handset.
To return to Handsfree Operation:
1. Press , (the indicator turns on).
On-Hook Dialing
To dial without lifting the handset:
1. If you want to use a Non-Prime Line, press a Line Appearance key.
2. Dial the number.
3. Lift the handset.
11
M3902 Phone User Guide
Auto-Answer
To enable or disable Auto-Answer:
•
Press the AUTO-ANSWER feature key.
To answer a call when you hear ringback:
•
Communicate by using the speaker and the microphone.
- or -
Lift the handset.
To terminate a call:
•
Press .
-or-
Wait for the caller to hang up.
12
Call Handling
Call Handling
Hold
To place a call on hold:
•
Press .
To retrieve a call from Hold:
1. Lift the handset.
2. Press the flashing line key.
To retrieve a call from Hold at another station:
•
Press the flashing line key.
-or-
Dial **1 and the number of the station that placed the call on Hold.
Transfer
To Transfer an active call:
1. Press .
2. Dial the number of the third party.
3. Do one of the following:
•
To complete the Transfer, hang up.
•
To announce the Transfer, wait for an answer, consult, and hang up.
•
To cancel the Transfer, press .
Conference
To form a Conference when a two-party call is already in place, or to add another party to an existing Conference:
1. Press .
2. Dial the number of the next party.
3. Wait for an answer.
4. Press .
13
M3902 Phone User Guide
To leave a Conference:
•
Hang up.
Conference Split
To Split a Conference and speak privately with the original party:
1. Press .
To return to the conference call:
•
Press .
Call Forward
Call Forward lets you redirect incoming calls to an alternate number. Always redirects all incoming calls regardless of the state of your phone. B-Int redirects internal calls when your phone is busy, and B-Ext redirects external calls when your phone is busy. NA-Int redirects internal calls after several rings if you don't answer, and NA-Ext redirects external calls after several rings if you don't answer.
Note: For information about "I Am Here?", see Call Forward - Remote on page 15.
To program Call Forward:
6. If the number is already programmed, press * (Change).
8. Dial the destination number.
To turn Call Forward on and off (once it has been programmed):
14
7. Do one of the following:
•
To turn Call Forward on, press * (TurnOn).
•
To turn Call Forward off, press # (TurnOff).
Call Forward - Remote
To forward calls from a remote station to your current location:
Call Handling
6. Dial the extension of the remote station.
To cancel Call Forward - Remote from the station that set the remote forwarding:
1. Lift the handset.
3. Dial the extension of the remote station.
To cancel Call Forward - Remote from the station that was forwarded:
15
M3902 Phone User Guide
Call Forward - End Chaining
To ensure that calls do not get forwarded again by the destination number:
1. Lift the handset.
To again allow calls to be forwarded by the destination number:
1. Lift the handset.
Call Forward - Override
To override Call Forward and ring a station:
1. Lift the handset.
3. Dial the extension number.
Messaging - Advisory
To turn Messaging - Advisory on:
To turn Messaging - Advisory off:
16
Messaging - Callback
Call Handling
To leave a Callback Message on a phone when you hear busy or ringback tone:
• Press MESSAGE.
To respond to a message waiting condition on your phone:
2. Do one of the following:
•
To call the message sender, press # (Call).
•
To erase the message, press * (Erase).
To answer a Callback:
•
Lift the handset.
Messaging - Cancel Callback
To cancel a Callback:
1. Lift the handset.
3. Dial the number of the called station.
Messaging - Cancel All Callbacks
To cancel all Callbacks:
1. Lift the handset.
17
M3902 Phone User Guide
Using Advanced Features
Account Codes
To use Forced Account Codes:
1. Lift the handset.
2. Dial the Account Code digits.
To enter an Account Code during a call:
1. Press .
3. Dial the Account Code digits.
5. Press .
Call Park
To retrieve a call parked by the attendant:
1. Lift the handset.
3. Dial the console ID and the Hold Slot number.
Call Pickup
To answer a call that is ringing at another station in your Pickup Group:
1. Lift the handset.
To answer a call that is ringing at a station not in your Pickup Group:
1. Lift the handset.
3. Dial the number of the ringing station.
18
Campon
Using Advanced Features
To Campon to a busy station:
•
Dial 3 or wait for the time-out period to expire.
To retrieve a call when you hear Campon tone:
•
Depress the hookswitch momentarily, and then dial *3. The current call is put on hold and you are connected to the waiting call.
Do Not Disturb
To activate or deactivate Do Not Disturb:
•
Press the Do Not Disturb feature key.
- or –
3. Do one of the following:
•
To activate Do Not Disturb, press * (TurnOn).
•
To deactivate Do Not Disturb, press # (TurnOff).
To activate Do Not Disturb from a remote station:
3. Dial the number of the station to which Do Not Disturb is to apply.
To deactivate Do Not Disturb from a remote station:
3. Dial the number of the station with Do Not Disturb activated.
Override
To use Override when you encounter busy or DND tone:
•
Dial 2.
19
M3902 Phone User Guide
Paging
To use Paging:
3. Dial the Paging zone number (if required).
4. Make the announcement.
Direct Paging
Direct Paging allows you to page a party through their phone speaker. If the paged party has Off-Hook Voice Announce enabled, the page will be heard even when the party is on a handset call.
To page a party:
1. Lift the handset.
3. Dial the extension number.
4. Speak to the dialed party after the tone.
If Handsfree Answerback has been turned on at your phone and you receive a Direct
Page while your phone is idle, or while you are on a handset call, a handsfree call will automatically be established after a single burst of tone.
The following instructions assume that Handsfree Answerback is not enabled on your phone.
To answer a Direct Page (indicated by a single burst of tone):
•
Lift the handset.
-or-
Press .
To answer a page while using the handset:
•
Press .
To enable or disable Handsfree Answerback:
•
Press while the phone is idle.
20
Music
To turn Music on and off when the phone is idle:
Using Advanced Features
2. Press # (No) until "Music?" appears.
3. Do one of the following:
•
To turn the music on, press * (TurnOn).
•
To turn the music off, press # (TurnOff).
Group Paging / Meet Me Answer
Group Paging allows you to page a group of telephones through their built-in speakers.
You can belong to as many as three paging groups with one group designated as your
"prime" group.
When you need to respond to a Group Page but don't know the identity or extension number of the paging party, use the Meet Me Answer feature. You have up to 15 minutes after receiving the page to use Meet Me Answer.
To make a Group Page:
1. Lift the handset.
3. Do one of the following:
•
To page your prime page group, press #.
•
To page a specific page group, dial the page group directory number.
4. Speak to the dialed party after the tone.
To respond to a Group Page by using Meet Me Answer:
1. Lift the handset.
3. Do one of the following:
•
To respond to a page from your prime page group, press #.
•
To respond to a page from a specific page group, dial the page group directory number.
21
M3902 Phone User Guide
Trunk Flash
The Trunk Flash feature allows you to access Centrex features (if available) while you are talking on an outside call.
To flash a trunk while talking on an outside call:
1. Press .
3. Wait for dial tone.
4. Dial the Centrex feature access code.
Tag Call
Tag Call allows you to “tag” any threatening call that you receive. Using this tag, your system administrator can identify the source of the malicious call and provide this information to appropriate personnel or authorities. You can only tag calls during an active two-party call.
Note: Tagging a call unnecessarily may result in fines or other penalties.
To tag a malicious call:
•
Press the Tag Call feature key.
- or -
1. Press .
If the call was successfully tagged “Thank You” is shown on the display; otherwise, “Not
Allowed” is displayed.
22
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project