advertisement
my
BERNINA
Sewing Machine
Workbook 3
Creative Options
For BERNINA 880, 7 Series, 580, 560
(Pages 8 - 12: B 780, 790, 880 only; Pages 13 - 15: B 880 only)
©2015 BERNINA of America. Permission granted to copy and distribute in original form only.
Content may not be altered or used in any other form or under any other branding.
Workbook 3—Creative Options
Table of Contents
Setup Program ···························································································· 3
Personal Program ························································································ 5
Long Stitch ·································································································· 7
Tapering Stitches ························································································· 8
Multi-Directional Stitching ·············································································· 9
Free-Form Directional Stitching ······································································· 10
All-Over Directional Stitching: Twisted Scrolls ···················································· 11
Monograms ································································································· 12
Stitch Designer ···························································································· 13
BERNINA 560 Functions ··············································································· 16
BERNINA 580 Functions ··············································································· 17
BERNINA 710 Functions ··············································································· 18
BERNINA 740 Functions ··············································································· 19
BERNINA 750 QE Functions ·········································································· 20
BERNINA 770 QE Functions ·········································································· 21
BERNINA 780 Functions ··············································································· 22
BERNINA 790 Functions ··············································································· 23
BERNINA 880 Functions ··············································································· 24
Machine Features and Functions Chart ···························································· 25
Presser Foot Chart ······················································································· 26
5
Series
8
Series
Creative
Options
7
Series
Welcome to your third and final sewing machine class in the My BERNINA series. By now, you are familiar with the basics of operating your machine and are ready to get into some of the unique features and functions that made you want your model in the first place. The information and stitching exercises in this book address the special features, functions, & techniques you can sew with the BERNINA 560, 580, 7 Series and 880 models.
052815
2
Workbook 3—Creative Options
Setup Program
Opening Screen of Setup Program
The Setup program allows you to customize the settings of your machine beyond the temporary adjustments that can be made as you sew. The changes made in Setup are saved and will remain until you change them again, even when the machine is turned off or disconnected. Changes made to the factory settings can be easily reset and the machine restored to the original settings by touching the icons shown below for each model.
B 560, 580
B 710
(without embroidery icon)
B 750 QE
B 740
(without embroidery icon)
B 770 QE, 780, 790
B 880
052815
3
Workbook 3—Creative Options
Setup Program
Frequently Used Setup Functions
The following icons represent the most frequently accessed functions in the Set-up Program. This quick-reference chart will get you to the right place simply by touching the Set-up icon (see above right), & then touching the icons shown below.
BERNINA
770 QE, 780,
790, 880
750 QE
740
710 560, 580
Wallpaper
Updating
Turn off
Security
Stitches
Turn off
Alarms
Hoop
Calibration
--- ---
Hover
--- --- ---
Help Function
There are other functions that can be set or reset using the Setup Program. Consult the manual and/or the Help feature for more information. Help provides an on-screen explanation of functions, designs, knobs, and status bars. Touch the question mark and then touch the icon that needs explanation.
052815
4
Workbook 3—Creative Options
Personal Program
Use the Personal Program to store your favorite stitches, most often used stitches, or a group of stitches needed for a particular technique or project such as the stitch collage shown on the next page.
B 560, 580, 710, 750QE B 740, 770 QE, 780, 790, 880
The BERNINA 560, 580, 710, and 750 QE models are equipped with one Personal Program; the BERNINA 740, 770 QE, 780, 790, and 880 models have four.
Creating a Personal Program
Select the desired stitch.
Make any desired altered settings to the Stitch Length/Width.
Select “i” to make additional changes to settings; close the “i” screen.
Touch Personal Program:
B 560, 580, 710, 750 QE: Select Save Stitch folder (arrow points to inside of folder). Touch stitch with yellow border to add to Personal Program.
B 740, 770 QE, 780, 790, 880: Select Save Stitch folder (arrow points to inside of folder); then, select one of the four Personal Program folders. The selected stitch has a yellow border around it. Select
Green Check to add to the Personal Program folder.
052815
5
Workbook 3—Creative Options
Personal Program
Fabric: Firm woven fabric, 4” x 6” and Heavyweight tear-away stabilizer, 4” x 6”
Needle: 80/12 Universal
Thread: 30 wt. cotton embroidery
Needle Position:
Default
BERNINA Presser Foot: Open Embroidery Foot #20/20C/20D. Sideways Motion
Foot #40C for B 780, 790, 880 also.
Creating a Stitch Collage Personal Program
Enter the seven stitches shown below into Personal Program making the indicated alterations.
Refer to page 5 for instructions on how to save to the Personal Program for your machine model.
Stitch 1: Pattern Repeat 4x
#159 (B 780, 790, 880)
#114 (B 560 - 770 QE)
Stitch 2: Pattern Repeat 7x
#301 (B 560 - 880)
Stitch 3: Pattern Repeat 2x
#374 (B 580 - 880)
Stitch 4: Pattern Repeat 5x
#603 (B 560 - 880)
Stitch 5: Pattern Repeat 5x
#748 (B 560 - 880)
Stitch 6: Pattern Repeat 3x
#814* (B 880, 780)
#1601* (B 790)
#738 (B 560 - 770 QE)
Stitch 7: Pattern Repeat 3x
#1122 (B 880)
#903 (B 560 - 790)
*Uses Sideways Motion Foot #40C
Stitching a Stitch Collage
Place stabilizer behind the fabric.
Select Personal Program > Stitch Pattern Selection Folder.
— B 560, 580, 710, 750 QE: Access saved designs. four folders where stitches were saved.
Select the stitches as desired and sew them in a random arrangement as desired, using the on-screen recommended presser foot.
Do you know how to:
▪ Add stitches to your Personal Program?
▪ Delete stitches from Personal Program?
▪ Access your Personal Program?
052815
6
Workbook 3—Creative Options
Long Stitch
Fabric: Firm woven fabric, 4” x 6” and Heavyweight tear-away stabilizer, 4” x 6”
Needle: 80/12 Universal
Thread: 30 wt. cotton embroidery
Needle Position:
Default
BERNINA Presser Foot: Open Embroidery Foot #20/20C/20D
Engaging/Disengaging Long Stitch Function
BERNINA 580, 750 QE, 770 QE, 780, 790, 880:
Select desired stitch.
Select “i” and select the Long Stitch icon.
Sew stitch.
Deselect the Long Stitch icon to turn off the function.
Close the “i” screen.
Select new stitch and continue process.
Long Stitch Exercise
Place stabilizer behind the fabric.
Row #1
- Select stitch #615; sew for approximately 2”- 3”.
- Engage the Long Stitch function and sew another 2”- 3”.
- Disengage the Long Stitch function.
Row #2
- Select stitch #606; sew for approximately 2”- 3”.
- Engage the Long Stitch function and sew another 2”- 3”.
- Disengage the Long Stitch function.
Row #3:
- B 780, 790, 880: Select stitch #655
- B 580, 750 QE, 770 QE: Select stitch #644
Row #1 Row #2 Row #3
- Sew for approximately 2” - 3”.
Stitch 615 Stitch 606 Stitch 655/
644
- Engage the Long Stitch function and sew another 2”- 3”.
- Disengage the Long Stitch function.
Tips
Use the Long stitch function with the straight stitch for basting.
function for the longest straight stitch, about 1¼” long. for a beautiful “saddle” stitch for topstitching.
▪ Use the Long Stitch function for basting
and for topstitching?
052815
7
Workbook 3—Creative Options
BERNINA 780, 790, 880 only
Fabric: Firm fabric, 4” x 6” and Heavyweight tear-away stabilizer, 4” x 6”
Needle: 80/12 Universal
Thread: 30 wt. cotton embroidery
Needle Position:
Default
BERNINA Presser Foot: Open Embroidery Foot #20C/20D
Tapering Stitches
Use the Tapering function to taper the end of a line of stitching, create corner accents, and stitch decorative
frames and boxes.
Place stabilizer behind the fabric.
Select Tapering Decorative Stitch menu #1401.
Edge Alignments
Select the Tapering Stitch #1401 (zigzag/satin stitch); adjust the stitch width to 6mm.
Stitch four lines of tapered stitching with a different tapering configuration for each. Define the overall length of the taper prior to beginning stitching using the Tapering Length function in (“i”) menu; set length to 25 mm. (Quick Reverse can also be used to set the length.)
Decorative Frame
Select one of the tapering stitches, then your choice of one of the tapering configurations
(sample shown is Taper stitch
#1414.).
Select new taper stitch and define length; sew, then pivot, stitch again, pivot and continue until the box shape is formed.
Tips
Use the Needle Stop Down function for more control as you stop and pivot at the corners.
Use the Raise Presser Foot button when pivoting your project in the corners of the design.
Certain tapering stitches are more appropriate for geometric applications.
Sew a test sample before sewing your project.
Do you know how to:
▪ Create a line of tapered stitching?
▪ Create a square with tapered corners?
052815
8
Workbook 3—Creative Options
Multi-Directional Stitching
BERNINA 780, 790, and 880
The multi-directional stitching feature of the 780, 790, and 880 offers sewing in 360º for single stitches and for stitch combinations.
Select the stitch, then Information (“i”), then the multi-directional icon.
Rotate the selected stitch in 45º increments by touching one of the direct-selection buttons on the screen (indicated by the red circles in the graphics below).
Rotate in 0.5º increments by turning the stitch width knob.
Rotate in 1º increments by turning the stitch length knob.
The Stitch Altering Area indicates the sewing direction of the stitch and the Start ( • ) and Stop ( + ) points of the selected stitch.
The Multi-directional function only appears if the selected stitch can be sewn in multiple directions.
Keys to Successful Multi-Directional Stitching
Support fabric with stabilizer.
Attach Slide-on Table.
Draw parallel guidelines to aid in visually keeping the fabric straight.
Use fingertip guiding (lightly holding the fabric without inhibiting or helping it).
Attach Sideways Motion Foot #40C.
BERNINA
780, 790, 880
stitch width knob—0.5º stitch length knob—1º
052815
9
Workbook 3—Creative Options
Free-Form Directional Stitching
BERNINA 780, 790, and 880 only
Fabric: Firm woven fabric, 4” x 8” and Heavyweight tear-away stabilizer, 4” x 8”
Needle: 80/12 Universal
Thread: 30 wt. cotton embroidery
Needle Position:
Default
BERNINA Presser Foot: Sideways Motion Foot #40C
Place stabilizer behind fabric; mark parallel guide lines about 1” apart on the fabric as a reference for guiding during the stitching process.
Select the Straight stitch, then select the Multi-Directional Stitching icon (the function only appears if the selected stitch can be sewn in multiple directions).
Select a direction by using the stitch width knob to rotate the stitch pattern in 0.5° steps, the stitch length knob for 1° steps or the directselection buttons for rotating in 45° steps for the desired direction.
Stitch 1” to 2”.
Select a different direction. Stitch a couple inches. Select another direction; stitch. Continue selecting directions and stitching.
Repeat, using a zigzag/satin stitch. Start at the top of the fabric and overlapping the stitching with the previous straight stitching.
Note: The BERNINA 780, 790 and 880 can change directions while stitching; the machine does not have to be stopped first.
Do you know how to:
▪ Access the straight and zigzag
stitches for Multi-Directional stitching?
052815
10
Workbook 3—Creative Options
All-Over Directional Stitching
BERNINA 780, 790, and 880 only
Fabric: Firm woven fabric, 4” x 6” and Heavyweight tear-away stabilizer, 4” x 6”
Needle: 80/12 Universal
Thread: 30 wt. cotton embroidery
Needle Position:
Default
BERNINA Presser Foot: Sideways Motion Foot #40C
This exercise features an all-over design created by selecting one stitch (#656 is shown in the sample) and changing directions as you sew.
Twisted Scrolls
Place stabilizer behind fabric; mark parallel guide lines about
1” apart on the fabric as a reference for guiding during the stitching process.
Select 225º on the compass, Pattern Repeat 1x and Needle
Stop Down. Stitch one stitch pattern and stop; do not remove the fabric.
Select 135º on the compass, leaving Pattern Repeat 1x and
Needle Stop Down engaged. Stitch one stitch pattern and stop; do not remove the fabric.
Stitch from one end of the fabric to the other, guiding fabric so that the “+” stays parallel and perpendicular to the presser foot.
Stitch additional rows of this stitch combination, covering the surface of the fabric.
Note: Some adjustments may be necessary depending on the fabric, thread, and stabilizer used to create the stitch
sample.
Optional: Create a 4-sided motif by selecting 315º and 45º as
the third and fourth sides.
Note: This technique can also be created by importing sewing machine stitches into Embroidery, which will be covered in Workbook 4.
Do you know how to:
▪ Change directions in 45º increments
when Multi-Directional stitching?
052815
11
Workbook 3—Creative Options
Monograms
BERNINA 780, 790, and 880 only
Fabric: Firm woven fabric, 6” x 6” and Heavyweight tear-away stabilizer, 6” x 6”
Needle: 80/12 Universal
Thread: 30 wt. cotton embroidery
Needle Position:
Default
BERNINA Presser Foot: Sideways Motion Foot #40C
BERNINA 780, 790 and 880
Select the Alphabet Category and the Large Monogram.
Open Combi-Mode.
Add letter 1; select 'i' and select the middle size monogram.
Close information and add the next 2 letters (the size is automatically adjusted).
Select the Editing Stitches icon, and drag and drop the letters into place using your stylus, fingertip or multifunction knobs.
Close the Editing Stitches screen.
Select pattern begin, set Pattern Repeat to 1 and stitch.
Stitching the Monogram
Place stabilizer behind fabric; mark parallel guide lines about 1” apart on the fabric as a reference for guiding during the stitching process.
Position the stabilized fabric under Sideways Motion Foot
#40C. Engage Pattern Begin and Pattern Repeat 1x.
As you stitch, guide the fabric, keeping the sides of presser foot parallel to the guiding lines drawn on the fabric. Clip and remove the basting stitches between the monogram letters.
Monogram Sizes
1 = 30mm (1.18”)
2 = 20mm (0.8”)
3 = 15mm (0.6”)
Tips
When sewing Sideways Motion stitches use the slide-on table to increase the sewing surface.
Make sure that the fabric is fed evenly and lightly, ensuring that it cannot push against or catch on anything. It is important to let the sewing computer sew, without pulling, pushing or holding back the fabric.
Do you know how to:
▪ Draw guidelines for directional stitching?
▪ Find the starting and ending points for
the monogram letters?
052815
12
Workbook 3—Creative Options
Stitch Designer Overview
Exclusive to the BERNINA 790 and 880 ONLY.
Ability to create your own stitches or modify existing stitches.
20 levels of UNDO.
Created patterns are limited to 2,000 stitches each.
No width limitation when designing beyond 9 mm.
Save created stitches to the Personal Program, or sew or embroider them.
Stitch Designer
To get started, select the Stitch Designer icon from the sewing screen.
052815
13
Workbook 3—Creative Options
Stitch Designer
Creating New Stitches - Free-hand Drawing
Touch the New icon to get a fresh page (pencil icon is the default when entering Stitch
Designer).
With your fingertip or touch pen, free-hand draw on the screen.
Note: The highlighted area is the 9 mm wide.
The 9 mm lock icon is activated by default. If you wish to design a stitch wider than 9 mm,
de-select the 9 mm lock.
Creating New Stitches - Snap to Grid
Select New icon to start another stitch.
Select snap to grid icon. Snap to Grid makes it easy to align points as stitch points will only fall on a dot (note the grid changed to dots).
Design stitch by setting points:
Click 1 - to begin stitch
Click 2 - 3 grids down
Click 3 – diagonal line 1 grid up and 1 grid over
Click 4 - diagonal line 1 grid down and 1 grid over
Click 5 - diagonal line 3 grids up and 2 grids over
Click 6 - diagonal line 3 grids down and 2 grids over
Click 7 – diagonal line 1 grid up and 1 grid over
Click 8 - diagonal line 1 grid down and 1 grid over
Stop
The Delete icon (Trash Can) deletes the last point, continued selection of the trash deletes points as it backs through the design.
The Selection icon has a small triangle in the lower right corner. Touch the selection icon and a fly-out menu will appear. Touch the Select All icon.
Selected stitches are blue, and the icon changes to the selection choice.
Select Duplicate to create second pattern.
Select Mirror Image Up/Down.
With part of the design still selected, select the
Move Icon. Use the Stitch Length knob to move the design to overlap the first part of the design.
The Stitch Length knob may also be used to move the design left and right.
052815
14
Workbook 3—Creative Options
With Snap to Grid engaged, the pattern will snap to a grid position.
Play Stitch Preview (acts like Slow Redraw).
Touch the green check to confirm the stitch pattern and return to the sewing screen.
Save the New Stitch to Personal Program
Touch the Personal Program icon to save the custom stitch pattern.
Touch the Save To icon (arrow pointing to folder), and choose one of the 4 yellow folders.
Save by touching the new stitch (outlined in yellow) or touching the green check button.
Edit an Existing Stitch
From the Sewing screen, select menu 700 and stitch 736.
Select Stitch Designer icon.
To move through a design, locate the current stitch point
(indicated by the largest dot and position is indicated by scroll numbers).
Touch the up and down arrows to move through the stitch pattern point by point. Arrow up to position 4 / 14.
Select pencil.
Touch the line in the middle and a stitch is added. If the stitch doesn’t go where you want it to, touch Delete (trash can) to remove it.
Select Move.
Drag new point in toward the center, or use the stitch length knob to move the new point.
Repeat this operation on the two remaining sides.
Select the green check to confirm and sew out or save to
Personal Program.
Stitch Designer
052815
15
Workbook 3—Creative Options
560 Sewing Functions
Home
Setup Program
Tutorial
Creative Consultant
Help
Eco
Clear Settings
Information
Back
Confirm Selection
Leave Active Display
Delete
SEWING FUNCTIONS
Stitch Selection by Number
Upper Thread Tension
Practical Stitches
Security Program -
Needle; Stitch Plate
Decorative Stitches Presser Foot Indicator
Alphabets
Personal Program/
Memory
Buttonholes
Direct Entry Buttonhole
Length
Programmable Buttonhole
Stitch Counter Buttonhole
Manual Buttonhole
Buttonhole Slit Width
Presser Foot Pressure
Needle Stop Up/Down -
Permanent
Needle Stop Up/Down -
Temporary
Programmable Pattern
End /Securing
Securing
Needle
Position
Lettering Size
Alphabet -
Upper/Lower Case
Pattern Begin
Pattern Repeat
Mirror Image (Left/Right)
Mirror Image (Up/Down)
Combi-Mode
Edit the Complete
Combination
Edit Combination at
Cursor Position
Combination Sub-divider
(1)
Combination Sub-divider
(2)
Balance
Continuous Reverse
052815
16
Workbook 3—Creative Options
580 Sewing Functions
Home
Setup Program
Tutorial
Creative Consultant
Help
Eco
Clear Settings
Information
Back
Confirm Selection
Leave Active Display
Delete
SEWING FUNCTIONS
Stitch Selection by Number
Upper Thread Tension
Practical Stitches
Security Program -
Needle; Stitch Plate
Decorative Stitches Presser Foot Indicator
Alphabets
Personal Program/
Memory
Buttonholes
Direct Entry Buttonhole
Length
Programmable Buttonhole
Stitch Counter Buttonhole
Manual Buttonhole
Presser Foot Pressure
Needle Stop Up/Down -
Permanent
Needle Stop Up/Down -
Temporary
Programmable Pattern
End /Securing
Securing
Needle
Position
Continuous Reverse
Buttonhole Slit Width
Balance
Lettering Size
Alphabet -
Upper/Lower Case
Pattern Begin
Pattern Repeat
Alter Pattern Length
Mirror Image (Left/Right)
Mirror Image (Up/Down)
Long Stitch
Combi-Mode
Edit the Complete
Combination
Edit Combination at
Cursor Position
Combination Sub-divider
(1)
Combination Sub-divider
(2)
052815
17
Workbook 3—Creative Options
710 Sewing Functions
Home
Setup Program
Tutorial
Creative Consultant
Help
Eco
Clear Settings
Information
Back
Confirm Selection
Leave Active Display
Delete
SEWING FUNCTIONS
Stitch Selection by Number
Upper Thread Tension
Practical Stitches
Security Program -
Needle; Stitch Plate
Decorative Stitches Presser Foot Indicator
Alphabets
Personal Program/
Memory
Buttonholes
Direct Entry Buttonhole
Length
Program Buttonhole
Length
Stitch Counter Buttonhole
Manual Buttonhole
Buttonhole Slit Width
Balance
Presser Foot Pressure
Needle Stop Up/Down -
Permanent
Needle Stop Up/Down -
Temporary
Programmable Pattern
End /Securing
Securing
Needle
Position
Continuous Reverse
Save Stitch Pattern
Setting
Back to Basic Stitch
Setting
Pattern Begin
Pattern Repeat
Alter Pattern Length
Mirror Image
(Left/Right)
Mirror Image
(Up/Down)
Combi-Mode
Edit the Complete
Combination
Edit Combination at Cursor Position
Combination
Subdivider (1)
Combination
Subdivider (2)
Lettering Size
Alphabet -
Upper/Lower Case
052815
18
Workbook 3—Creative Options
740 Sewing Functions
Home
Setup Program
Tutorial
Creative Consultant
Help
Eco
Clear Settings
Information
Close
Confirm Selection
Cancel
Delete
SEWING FUNCTIONS
Stitch Selection
by Number
Upper Thread Tension
Practical Stitches
Presser Foot Indicator /
Presser Foot Selection
Decorative Stitches
Alphabets
Quilting Stitches
Presser Foot Pressure
Security Program -
Stitch Plate & Needle
Needle Minder
Personal Program/Memory
Buttonholes
Direct Entry Buttonhole
Length
Buttonhole Slit Width
Stitch Counter Buttonhole
Manual Buttonhole
Save Altered Stitch
Pattern Setting
Back to Basic Stitch
Setting
Feed Dog Up/Down
Filling of Bobbin
Needle Stop Up/Down -
Permanent
Needle Stop Up/Down -
Temporary
Needle Position
Securing
Programmable Pattern
End /Securing
Pattern Begin
Pattern Repeat
Alter Pattern Length
Mirror Image (Left/Right)
Mirror Image (Up/Down)
Combi-Mode
Edit the Complete
Combination
Edit Combination at
Cursor Position
Combination Sub-divider
(1)
Combination Sub-divider
(2)
Font Size in Alphabet
Continuous Reverse
Sewing
Backstepping
Balance
052815
19
Workbook 3—Creative Options
750 QE Sewing Functions
Home
Setup Program
Tutorial
Creative Consultant
Help
Eco
Clear Settings
Information
Back
Confirm Selection
Leave Active Display
Save Stitch Pattern
Setting
Back to Basic Stitch
Setting
SEWING FUNCTIONS
Stitch Selection by Number
Upper Thread Tension
Practical Stitches
Security Program -
Needle; Stitch Plate
Decorative Stitches Presser Foot Indicator
Alphabets
Personal Program/
Memory
Buttonholes
Direct Entry Buttonhole
Length
Programmable Buttonhole
Stitch Counter Buttonhole
Manual Buttonhole
Presser Foot Pressure
Needle Stop Up/Down -
Permanent
Needle Stop Up/Down -
Temporary
Programmable Pattern
End /Securing
Securing
Needle
Position
Continuous Reverse
Buttonhole Slit Width
Delete
Stitch Counter
Balance
Pattern Begin
Pattern Repeat
Alter Pattern
Length
Mirror Image
(Left/Right)
Mirror Image
(Up/Down)
Long Stitch
Combi-Mode
Edit the Complete
Combination
Edit Combination at Cursor Position
Combination
Subdivider (1)
Combination
Subdivider (2)
Lettering Size
Alphabet -
Upper/Lower
052815
20
Workbook 3—Creative Options
770 QE Sewing Functions
Home
Setup Program
Tutorial
Creative Consultant
Help
Eco
Clear Settings
Information
Close
Confirm Selection
Cancel
Delete
Save Altered Stitch
Pattern Setting
Back to Basic Stitch
Setting
SEWING FUNCTIONS
Stitch Selection
by Number
Upper Thread Tension
Practical Stitches
Presser Foot Indicator /
Presser Foot Selection
Decorative Stitches
Alphabets
Quilting Stitches
Personal Program/Memory
Buttonholes
Direct Entry Buttonhole
Length
Buttonhole Slit Width
Stitch Counter Buttonhole
Manual Buttonhole
Continuous Reverse
Sewing
Backstepping
Presser Foot Pressure
Security Program -
Stitch Plate & Needle
Needle Minder
Feed Dog Up/Down
Filling of Bobbin
Needle Stop Up/Down -
Permanent
Needle Stop Up/Down -
Temporary
Needle Position
Securing
Programmable Pattern
End /Securing
Pattern Begin
Pattern Repeat
Alter Pattern Length
Mirror Image (Left/Right)
Mirror Image (Up/Down)
Combi-Mode
Edit the Complete
Combination
Edit Combination at
Cursor Position
Combination Sub-divider
(1)
Combination Sub-divider
(2)
Font Size in Alphabet
Long Stitch
Stitch Counter
Balance
052815
21
Workbook 3—Creative Options
780 Sewing Functions
Home
Setup Program
Tutorial
Creative Consultant
Help
Eco
Clear Settings
Information
Back
Confirm Selection
Leave Active Display
Delete
Save Stitch Pattern
Setting
Back to Basic Stitch
Setting
Continuous Reverse
Sewing
Backstepping
SEWING FUNCTIONS
Stitch Selection
by Number
Upper Thread Tension
Practical Stitches
Security Program - Needle
Decorative Stitches Presser Foot Indicator
Alphabets
Quilting Stitches
Personal Program/
Memory
History
Presser Foot Pressure
Security Program - Stitch
Plate
Feed Dog Up/Down
Buttonholes
Direct Entry Buttonhole Length
Program Buttonhole
Length
Stitch Counter Buttonhole
Manual Buttonhole
Buttonhole Slit Width
Stitch Counter
Balance
Long Stitch
Filling of Bobbin
Stitch Pattern View -
Match Size to Display
Needle Stop Up/Down -
Permanent
Needle Stop Up/Down -
Temporary
Securing
Programmable Pattern
End /Securing
Pattern Begin
Needle Position
Connecting Stitches
Tapering
Pattern Repeat
Alter Pattern Length
Mirror Image (Left/
Right)
Mirror Image (Up/
Down)
Multi-directional
Sewing
Combi-Mode
Editing Mode
Edit the Complete
Combination
Edit Combination at
Cursor Position
Adjust Width in a
Combination
Adjust Length in a
Combination
Move Stitch Patterns in a Combination
Combination Subdivider (1)
Combination Subdivider (2)
Lettering Size
Monogram Size
052815
22
Workbook 3—Creative Options
790 Sewing Functions
Home
Setup Program
SEWING FUNCTIONS
Stitch Selection
by Number
Practical Stitches
Upper Thread Tension
Security Program - Needle
Pattern Repeat
Alter Pattern Length
Tutorial
Creative Consultant
Help
Eco
Decorative Stitches
Alphabets
Quilting Stitches
Personal Program/Memory
Buttonholes
Direct Entry Buttonhole
Length
Program Buttonhole
Length
Stitch Counter Buttonhole
Needle Minder
Presser Foot Indicator /
Presser Foot Selection
Presser Foot Pressure
Security Program -
Stitch Plate
Feed Dog Up/Down
Mirror Image (Left/Right)
Mirror Image (Up/Down)
Multi-directional Sewing
Combi-Mode
Clear Settings
Information
Back
Confirm Selection
Leave Active Display
Delete
Save Altered Stitch
Pattern Setting
Back to Basic Stitch Setting
Continuous Reverse
Sewing
Backstepping
History
Manual Buttonhole
Buttonhole Slit Width
Stitch Counter
Long Stitch
Filling of Bobbin
Stitch Pattern View -
Match Size to Display
Needle Stop Up/Down -
Permanent
Needle Stop Up/Down -
Temporary
Securing
Programmable Pattern
End /Securing
Pattern Begin
Needle Position
Editing Mode
Edit the Complete
Combination
Edit Combination at
Cursor Position
Adjust Width in a
Combination
Adjust Length in a Combination
Move Stitch Patterns in a
Combination
Combination Sub-divider
(1)
Combination Sub-divider
(2)
Font Size in Alphabet
Tapering Connecting Stitches Monogram Size
Balance Stitch Designer
052815
23
Workbook 3—Creative Options
External Buttons
1. Automatic Threading*
2. Securing Function
3. Needle Up/Down
4. Pattern End*
5. Presser Foot Up/Down
6. Auto Thread Cutter
7. Slide Speed Control
8. Start/Stop/Hover*
9. Backstepping/Quick Reverse
1
3
5
7
4
2
6
9
* Illuminated Buttons
8
Home
Setup Program
Tutorial
Creative Consultant
Help
Eco
880 Sewing Functions
SEWING FUNCTIONS
Stitch Selection
by Number
Upper Thread Tension
Practical Stitches
Security Program -
Needle. Needle Minder
Decorative Stitches
Presser Foot Indicator /
Presser Foot Selection
Alphabets
Quilting Stitches
Presser Foot Pressure
Security Program - Stitch
Plate
Personal Program/Memory Feed Dog Up/Down
Pattern Repeat
Alter Pattern Length
Mirror Image (Left/Right)
Mirror Image (Up/Down)
Multi-directional Sewing
Combi-Mode
Clear Settings History Filling of Bobbin Editing Mode
Information
Back
Confirm Selection
Leave Active Display
Delete
Buttonholes
Direct Entry Buttonhole
Length
Program Buttonhole
Length
Stitch Counter Buttonhole
Manual Buttonhole
Stitch Pattern View -
Match Size to Display
Needle Stop Up/Down -
Permanent
Needle Stop Up/Down -
Temporary
Securing
Programmable Pattern
End /Securing
Edit the Complete
Combination
Edit Combination at
Cursor Position
Adjust Width in a
Combination
Adjust Length in a Combination
Move Stitch Patterns in a
Combination
Combination Sub-divider
(1)
Combination Sub-divider
(2)
Save Altered Stitch
Pattern Setting
Back to Basic Stitch
Setting
Continuous Reverse
Sewing
Backstepping
Buttonhole Slit Width
Stitch Counter
Balance
Pattern Begin
Needle Position
Connecting Stitches Font Size in Alphabet
Time/Alarm
Long Stitch
Balance BERNINA Dual
Feed
Tapering
Distorting Stitch Patterns
Monogram Size
Stitch Designer
052815
24
24
Workbook 3—Creative Options
Features & Function Chart
The following features and functions are used in Workbook 3: Creative Options.
Feature/ Function
8
Series
880 790
7 Series
780 770 QE 750 QE 740 710
Connecting Stitches yes yes yes --- ---
Editing yes yes yes — yes —
Long Stitch yes yes yes yes yes — —
Monograms
1 style
3 sizes
1 style
3 sizes
1 style
3 sizes
Multi-Directional
Stitching
360 directions
360 directions
360 directions
Needle Stop
Up/Down yes yes yes
Personal Program
—
— yes yes
4 folders yes
4 folders yes
4 folders yes
4 folders
—
— yes yes
—
— yes
—
— yes yes
4 folders yes
Setup Program yes yes yes Yes yes Yes yes yes yes yes — — — —
Tapering Stitches
Stitch Designer
yes yes — — — — —
5 Series
560
580
—
—
— yes yes yes
—
—
—
---
—
--- yes yes yes
---
— yes
---
052815
25
Workbook 3—Creative Options
Presser Foot Chart
The presser feet listed below are included with the purchase of each model as indicated on the chart (-- indicates that the presser foot is not included but may be available as an optional accessory).
8
Series
880 790
7 Series
Presser Feet
780 770 QE
750 QE 740 710
Reverse Pattern
Foot #1/1C/1D
1C & 1D 1C & 1D 1C & 1D 1C & 1D
Overlock
Foot #2/2A
2A
Standard
Buttonhole
Foot #3/3C
3C
Auto Buttonhole
Foot #3A
3A
2A
--
3A
2A
--
3A
--
--
3A
1C & 1D
--
--
3A
1C & 1D
--
--
3A
1C & 1D
--
--
3A
Zipper
Foot #4/4D
4D 4D 4D 4D 4D 4D 4D
Blind Hem
Foot #5
5 5 5 -- 5 -- 5
Jeans
Foot #8/8D
Button Sew-On
Foot #18
Open Embroidery Foot
#20/20C/20D
Embroidery
Foot #26
Patchwork
Foot #37/37D or
#39/39D
Sideways
Motion Foot
#40C
BERNINA Stitch
Regulator #42
--
18
20C
26
--
40C
42
8D
--
20C
26
--
40C
42
8D
--
20C
26
--
40C
42
--
--
20C
26 w/emb
26 w/emb
--
97D
--
42
--
--
20C
37D
--
42
--
--
20C
--
--
--
--
--
--
--
--
--
--
8
--
3A
4
5
5 Series
580 560
1C 1C
2A
—
20C
26
--
--
42
2A
—
--
--
3A
4
5
20C
26 w/emb
--
--
--
C = Feet with sensors that enable 9mm stitching
D = Feet that connect to the Dual Feed system of the machine
052815
26
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement