Analytic Systems BCD1015R-48-12 Battery Charger Datasheet

Description

The model BCD1015R Rackmount DC Battery Charger charges either 12V,

24V or 48V batteries from a 24V, 48V or 72VDC power source. Other battery voltages up to 56 volts are also available by special order.

The all-new Current Mode switching design offers increased power and reliability in a compact package. The low ripple charging profile and standard equalize cycle greatly increases the lifetime of expensive battery systems.

Extra input and output filtering reduce EMI to extremely low levels. Reliability features include an input fuse, thermal shutdown, current limiting, reverse battery hookup protection and output short circuit shutdown with automatic recovery.

The output voltage is easily adjusted 1.0 volts above or below the standard output voltage to accommodate special charging requirements. A high quality

Digital Volt/Ammeter allows the monitoring of charging current and charging voltage. We are confident that you will get many years of reliable service from this DC Battery Charger.

DC BATTERY CHARGER

MODEL

BCD1015R ISOLATED

BATTERY CHARGER

Benefits

• Ultra-Quiet

• Power sensitive electronics without interference

• Rugged & Reliable

• Ensure years of safe and trouble free operation

• Fast & Accurate Charging

Design Features

• Fully Isolated Design

• Adjustable output voltage for charging standard or deep cycle lead-acid,

VRLA or Gel cell type battery

• Transient Voltage Suppressor

• Extremely rugged and well suited for marine and other demanding environments

• High tolerance for shock and vibration

• Ultra-quiet low EMI operation

• Can be left permanently connected

• Spark free connection

• User selectable 2 or 3 stage charging profile

• Audible & visual indicators for output overload, low input voltage, low output voltage & over-temperature

• Over-temperature shutdown

• Short circuit protection

• Output over-voltage crowbar

• Dry contact output fail relay

• 3 year parts and labour warranty

Applications

• Telecom Power Plants

• Electric Utilities and Substations

• Marine & other Rugged Environments

• Manufacturing Plants

• Steel Mills

• Military Applications (COTS)

• Industrial Controls

• OEM Applications

• Solar / Alternative Power Systems

• Fuel Cells

• Charge any DC/DC System

An ISO9001 and AS9100 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters

8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA)

www.analyticsystems.com

DC BATTERY CHARGER

MODEL BCD1015R ISOLATED BATTERY CHARGER

Electrical (Input)

Nominal (ip)

Actual (Vac)

Input Amps (max)

Input Fuse (ATC)

Noise on Input

Electrical (Output)

Output Nominal (op)

Output Volts (DC)

Absorption Voltage (Vdc)

Charging Amps

Absorption to Float

Output Adjustment

Output Fuses (ATC)

Battery Banks

Battery Size (Amp Hrs.)

Output Crowbar

Output Ripple & Noise

Regulation (Line & Load)

Temperature Comp.

Duty Cycle

Efficiency

Stages

Environment Specification

24 48

20-35 40-60

66.7

25 x 3

< 50mV

34

20 x 2

72

65-90

21

25 x 1

12 24

13.6 ± 0.05

27.2 ± 0.05

48

54.4 ± 0.05

14.4

60

28.8

40

57.6

20

9 .0 Amps 6 .0 Amps 3.0 Amps

± 1.0V

40 x 2 40 x 2 25 x 2

1 or 2 (3 Bank Option Available)

240-360 160-240 80-120

16.0 ± 0.5V

32.0 ± 1.0V

63.9 ± 2.0V

< 50 mV

< +/- 0.5%

-30 mV/°C -60 mV/°C -120 mV/°C

Continuous 100% for 24 hours per day

> 80% @ Maximum Output

2 or 3 (user selectable)

Operating Temp. Range

Humidity

Audible Noise

Typical Service Life

Isolation

-25° to +40°C @ maximum output

Derate Linearly 2.5% per °C from 40°C

(Optional -40°C extra wide temp. operation avail.)

0 - 95% Relative Humidity

(non-condensing) with optional conformal coating

NONE Ødb @ 3 ft (34.5 dB when fan operating)

> 10 yrs. (87,600 hrs)

Input-Case & Input-Output 1500VDC (500V @ 24V I/P)

Output-Case 500VDC (1500VDC @ 48V O/P)

Mechanical Specification

Depth

Width

Height

Clearance

Material

Finish

Fastenings

Weight

Connections

Warranty

Safety

13.5 in/ 34.3 cm

19.0 in/ 48.3 c

2u(3.5 in)/ 8.9 cm

1 inch (2.5 cm) all around

Marine Grade Aluminium

Black Anodize / Powder Epoxy Coat

All 18-8 Stainless Steel

12.0 lb / 5.5 kg

Four contact output terminals

3 years

Designed to meet CSA 22.2.107.1 & UL458

Note: Specifications are subject to change without notice.

An ISO9001 and AS9100 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters

8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA)

www.analyticsystems.com