Mitsubishi 2014 OUTLANDER Owner`s manual

2014 OUTLANDER
Owner’s Handbook
Please place copies of the following items in the pocket below:
1. Pre-Delivery Inspection Form (Customer Copy)
2. Triple Diamond Delivery Checklist (Customer Copy)
3. Salesperson or Key Dealership Contact’s Business Card
1
Table of Contents
Driver’s View...................... Page 2-3
Controls............................. Page 4
Thank you for buying a Mitsubishi Outlander. There’s no doubt you’ve already realized how
well your car drives on the open road. What you may not know is all the great features that
help your car perform the way it does. In the pages ahead we’re going to run through the
basics and prepare you for the road.
We’d also love to hear from you about your overall Mitsubishi experience. If you haven’t
already, please log on to www.MitsubishiSSIsurvey.com and tell us how we did. This will help
us make sure your next visit is that much better.
We hope you will visit the Mitsubishi Owner’s site where we store the latest Mitsubishi news
and special offers. Here you can also keep track of your car’s warranty and servicing needs,
get Roadside Assistance Information and tap into other owner-centric details. Just log on to
www.Mitsubishicars.com/ownersonly.
Own the Road.................... Page 5
Switches............................ Page 6
ECO Driving....................... Page 7
Folding and Stowing
the Second and Third
Row Seat (if equipped)....... Page 8
Technology ....................... Page 9
Audio System..................... Page 10
Display Audio System
(if equipped)...................... Page 11-12
HD Weather and Fuel
(if equipped)...................... Page 12
Bluetooth® (if equipped)..... Page 13
Navigation System
(if equipped)...................... Page 14-15
FAQ’s................................. Page 16-17
2
Driver’s View
1Side Mirror Adjustment.......................... Page 4
2 Climate Controls.................................... Page 4
3Headlights............................................ Page 4
4 Windshield Wiper Lever......................... Page 4
5 Adaptive Cruise Control (if equipped).... Page 5
6 Paddle Shifters (GT only)...................... Page 5
6
3
7 Seat Heater Switch ............................... Page 5
8 Lane Departure Warning (LDW) and
Forward Collision Mitigation (FCM)
(if equipped)......................................... Page 6
13
9 Power Liftgate Main Switch
(if equipped)......................................... Page 6
15
10 ECO Mode Switch................................. Page 7
11 Multi Information Display (MID)............. Page 9
12 Start/Stop Engine Switch
(if equipped with F.A.S.T.-key)............... Page 9
13 Audio Remote Control Buttons
(if equipped)......................................... Page 10
4 Display Audio and Navigation System
1
(if equipped)......................................... Page 11-12, 14
15Bluetooth® Controls (if equipped).......... Page 13
1
8
3
14
11
6
5
12
4
10
2
9
7
4
CONTROLS
Regular Headlights
Automatic Headlights (if equipped)
Windshield Wipers
The wipers will operate once.
INT: Intermittent intervals can be
adjusted by turning the knob A
AUTO: The wipers will be operated
automatically by rain sensor
(if equipped).
Slow
Fast
Rear Window Wiper and Washer
Headlights and other lights on.
Turn the knob B to operate the rear
window wiper.
Parking, tail, front and rear sidemarker lights, license plate
and instrument panel lights on.
The wiper operates continuously
for several seconds then operates
intermittently at intervals of about 8
seconds.
Headlights and other lights turn on and off automatically
in accordance with outside light level.
AUTO
All lights off
OFF
Washer fluid is sprayed, the wiper will
automatically operate 2 or 3 times.
Pull lever toward driver to activate high beams.
Dual-Zone Automatic Climate Controls (if equipped)
A
A
B
C
D
E
F
G
H
A -Push to select the desired temperature
B -Push to select outside air (Indicator light off) or recirculated
air (Indicator light on)
C -Push for air conditioning ON/OFF
D -Push to select the blower speed
E -Push to select the position and
amount of air flowing from the
vents
F -Push to defog windshield.
G -When the AUTO switch is
pressed, the settings are
automatically controlled.
Passenger’s side temperature
will be changed to the same
temperature set as the driver’s
side
H-Push to defog the rear windows.
Side Mirror Adjustment
A
Adjust switch
The outside rearview
mirrors can be adjusted
when the ignition switch
is in the “ON” or “ACC”
position or the operation
mode is put in ON or ACC.
Move the lever (A) to the
same side as the mirror
you wish to adjust.
OWN THE ROAD
Paddle Shifters (GT only)
– :SHIFT DOWN
+ :SHIFTUP
Simply upshift or
downshift with a tap of
your fingers – without
moving your hands from
the steering wheel.
Drive Mode Selector (if equipped)
The drive mode can be switched
by pressing the drive mode button
while the ignition switch is in the ON
position.
Pressing the button will change the
drive mode in order to:
You can return to the “D”
operation by pulling the +
(SHIFT UP) side paddle
shifter rearwards (toward
the driver) and holding for
over 2 seconds.
AWC ECO, NORMAL, SNOW, LOCK
Seat Heater Switch
Adaptive Cruise Control (if equipped)
Position - Action
- For quick heating
(HI)
(NEUTRAL) - Heater off
- To keep the seat warm
(LO)
A - CANCEL: To deactivate the ACC or
cruise control
B - RES +: To increase the set speed or
resume control after cancelling the
A
B
ACC or cruise control function.
C - SET-: To set the desired speed and
to reduce the set speed.
C
D - ON / OFF: To turn cruise control ON or OFF
E - ACC Distance Switch - Used to set or change the following distance between your vehicle and the vehicle in
D
front of you.
To set a cruising speed
E
1.Press D and the “ACC” (if equipped) or “CRUISE” indicators will appear in the multi information display.
2.Accelerate or decelerate to your desired speed (above 25 mph). Press C and remove your foot from the accelerator pedal.
To accelerate or decelerate speed
Push up B to increase set cruising speed.
Push down C to decrease set cruising speed.
To cancel the cruising speed Press A or press brake pedal, or press D .
5
6
SWITCHES
Active Stability Control (ASC) Off Switch
Lane Departure Warning (LDW) Switch (if equipped)
You can deactivate the system by
pressing down the “ASC OFF” switch for
3 seconds or longer.
When the ASC is deactivated, the
display/indicator will turn on. To
reactivate the ASC, momentarily press
the “ASC OFF” switch; the display/
indicator is turned off.
Power Liftgate Main Switch (if equipped)
When the power liftgate main switch is ACTIVE, the
power liftgate can be operated using either the power
liftgate switch on the F.A.S.T.-key, the driver’s side
power liftgate switch or the open/close switches on
the power liftgate.
When you press the LDW switch, the “LDW” indicator on the
information screen of the multi information display turns OFF
and the LDW system is inactive.
Press the switch again, the system will activate.
Forward Collision Mitigation (FCM) Switch (if equipped)
Power Liftgate Switch (if equipped)
The power liftgate can be opened by
pressing the Power Liftgate Switch.
Every time the operation mode is turned to “ON”, the FCM
will automatically be turned on.
To turn off the FCM, press and hold the FCM switch. A buzzer
will sound and the “FCM OFF” message and indicator will
appear in the multi information display.
To change the warning distance mode, briefly press the FCM
switch.
ECO DRIVING
ECO indicator
ECO mode switch
This indicator will be displayed when fuel
efficient driving is achieved.
ECO mode is an eco-driving support
system which automatically controls
the engine, air conditioning system,
4WD system (if equipped) and
S-AWC (if equipped) to improve
fuel efficiency.
To activate, press the ECO mode
switch.
ECO Drive Assist
This function displays how fuelefficiently you are driving under
different driving conditions.
To show, press the multi
information display switch.
ECO drive level
Low
High
Multi information
display switch
ECO Score
ECO drive level
Low
High
ECO score indicates the points
you have scored on fuel-efficient
driving by the number of leaves.
To show, press the multi
information display switch.
Momentary fuel consumption display
While driving, the momentary fuel
consumption is shown with a bar
graph.
The “” mark in the momentary
fuel gauge shows the average fuel
consumption.
When the momentary fuel consumption surpasses the average fuel
consumption, the momentary fuel consumption is displayed with a green
bar graph.
Maintaining your fuel consumption above the average fuel consumption
point will help increase your mileage per gallon.
To show, press the multi information display switch.
Tire Pressure Monitoring System (TPMS)
The Tire Pressure Monitoring System light illuminates
when one or more of your tires is significantly under
inflated. Please note that changes in the outside
temperature may decrease tire pressure causing the
TPMS light to turn on. If the TPMS
light remains illuminated, check your
tire pressure.
If the warning light illuminates, take the necessary
measures referring to the owner’s manual.
7
8
FOLDING AND STOWING THE SECOND AND THIRD ROW SEAT (if equipped)
Folding the second row seats
Unfolding the second row seats
2. Pull up on the front edge of the bottom seat cushion and raise it up.
Then lift the back side of the bottom seat cushion up and flip it over
toward the front side as you rotate the bottom seat cushion into the
foot well area.
3. Make sure the seat belt buckles are up (D) (Figure 3) and gently
lift the seat cushion and fold it back into position making sure the
hook (E) slides below the seatback bottom. Press down on the seat
cushion to lock into place.
1.Slide the seat all the way to the rear by pulling up on the sliding
lever located under the bottom of the seat and pushing to the back.
3.Once the seat cushion is flipped forward, slide the lever (A) which
is now visible, forward into the “seat flat” position to lock the seats
down.
1. Remove Headrests from storage hook on folded seat cushion.
2. Raise the seatback until it locks into place.
4. Replace headrests.
Figure 3
E
A
4. Remove the headrests by pushing the button on the headrest post
and then lifting up on the headrest simultaneously. Place the
headrest out of the way. (The middle headrest can remain in the
lowest position).
D
Folding the third row seat
5.Now pull the lever on the top of the backrest (B) and lower the seat
forward so it lays flat.
1. Remove the head restraints.
6.Grab the headrest and face it forward. Find the slit on the bottom
rear of the headrest and place it on the metal hook located on the
middle part of the folded seat cushion (C). Place your other hand on
the back of the headrest and gently push it down until you hear and
or feel it lock into place.
3. To return, pull the strap (B), then raise the seatback until it locks
securely into place.
2. Pull up the strap (A), then fold the seatback forward.
A
C
B
B
TECHNOLOGY
Keyless Entry System
Multi Information Display Switch
Normal Key
F.A.S.T.-Key
1.LOCK ( ) button
2.UNLOCK ( ) button
3. Power liftgate button
(if equipped)
4.PANIC button
5.Operation indicator light
If the F.A.S.T.-key is not operating properly
Insert the F.A.S.T.-key into the key slot in the instrument panel.
Starting the engine and changing the operation mode should be
now possible. Remove the F.A.S.T.-key from the key slot after
starting the engine or changing the operation mode.
A
While carrying the F.A.S.T.-key, press
the driver’s or front passenger’s door
lock/unlock switch A .
Each time the multi information display
switch is operated, the buzzer sounds and
the multi information display changes
between information such as warnings,
trip odometer, average and momentary fuel
consumption, distance range, etc.
Start/Stop Engine Switch (if equipped with F.A.S.T.-key)
While carrying the F.A.S.T.-key within the operating range, the Start/Stop button can be used to start the engine.
• Move the selector lever in “P” position and hold the brake pedal down, push the Start/Stop button.
• To stop the engine, stop the vehicle completely and move the selector lever in “P” then press the Start/Stop button.
* If you have to bring the engine to an emergency stop while driving, press and hold the Start/Stop button for 3
seconds or more, or press it quickly 3 times or more.
• If you press the Start/Stop button without depressing the brake pedal, you can change the operation mode in the
order of OFF, ACC, ON, OFF.
• If the engine cannot be started or the operation mode cannot be changed, check the position of the F.A.S.T.-key or
the battery performance of the F.A.S.T.-key.
9
10
AUDIO SYSTEM
USB and iPod Input (if equipped)

D
A

C
B

To enter frequencies into the memory (AM/FM/SAT)
1. Press A to turn on the audio system.
2. Press B to select the desired band (AM/FM/SAT).
3. Press C to Seek Station
4.Hold down one of the Memory select buttons D (1-6) until it
beeps in order to save that station to memory.
VOLUME
UP
MODE
Change the
audio source
SEEK
Change
station or
track
VOLUME
Down
NOTE:


E
Audio Remote
Control Button
(if equipped)

Please refer to your Owner’s Manual for more detailed information on
how to use your audio system.

1. Park your vehicle in a safe place and turn the ignition switch to
LOCK position.
2.Connect the cable  (cable is not included with the vehicle) to the
USB memory device  or the Dock connector  to the iPod .
3.Open the cover  in the floor console box. Connect the cable  to
the USB input terminal .
4.Turn the ignition switch to the “ACC” position. Turn on the audio
system.
5.Press E several times to switch to the USB mode. The input mode
changes as follows:
CD  USB  Bluetooth® (if equipped)
6. Depending on your USB device, it may take longer for playback to
start.
7.Once the device is selected, playback starts.
With Display Audio System, follow steps 1 through 4 above
5.Press MENU on the touch screen.
6.Touch USB.
7.Touch <Folder> then select a track and begin playback.
DISPLAY AUDIO SYSTEM (if equipped)
System Settings
Listening to the Radio
System related settings, such as the operation sound and the
time, can be made.
1. Press the MENU key. The top menu is displayed.
2. Touch Setting, and then System Setting.
This explains how to listen to AM and FM radio broadcasts. HD RadioTM
broadcast or analog broadcast can be received.
1. Press the MENU key. The top menu is displayed.
2. Touch AM or FM. The radio broadcast information screen is displayed.
The system setting screen is displayed.
3. Touch TUNE to tune in a station. The station at the selected frequency is
played.
This is a setting item displayed by touching Time Setting.
Settings name Settings value
Time
Adjustment
PSD
Touch the corresponding ▲
or
and change the date and time.
Time Display
Settings
This HD Radio receiver enables:
Settings content
Time
▼
Date
HD2/HD3Adjacent to traditional main stations are extra local FM
channels. These HD2/HD3 Channels provide new, original music
as well as deep cuts into traditional genre.
Digital Sound
Time
The date and time display format can be set.
12h or 24h display can be set.
Program Service Data: Contributes to the superior user
experience of HD Radio Technology. Presents song name, artist,
station IDs, HD2/HD3 Channel Guide, and other relevant data
streams.
Digital, CD-quality sound. HD Radio Technology enables local
radio stations to broadcast a clean digital signal. AM sounds like
today’s FM and FM sounds like a CD.
11
12
DISPLAY AUDIO SYSTEM (continued) AND HD WEATHER AND FUEL (Navigation only)
FM Radio Broadcast Information Screen (Display Audio System only)
6)
1)
2)
7)
3)
4)
5)
8)
9)
10)
11),12)
13)
14)
HD Weather and Fuel Prices (Navigation System only)
15)
From the navigation screen press on the Info button
Then press on HD Information
Then press on WEATHER or FUEL PRICE
16)
17)
1. Source plate - Displays the name of the currently selected source, preset channel
number, reception frequency, and station name.
2. HD Radio TM indicator - Displayed during digital sound output.
3. Preset switch - Allows you to register your favorite broadcast stations.
Touch and hold the switch for the desired preset channel number until you hear
the “beep”. This registers the broadcast station currently being received.
**→“Register Your Favorite Broadcast Stations”
4.
- Touching it displays the sub-menu. The Scan, Radio Setting, Sound
Control settings can be made.
5.<TUNE> - Used to change the frequency. Touching and holding until you hear the
“beep” starts automatic station selection (seek).
**→“Starting the Seek”
6.SSN - Displays the SSN (Short Station Name) that is currently being received.
If there is a sub-channel, the received channel number/total number of subchannels is displayed.
7.PTY - Displays the PTY (Program Type) being received.
8.Info - Switches to information display.
9. Station List - Displays a list of the stations that can be received.
**→“Search for Broadcast Stations from the Station List”
10.FM1, FM2 - Allows you to register your favorite 6 stations for each band.
11.Title - Displays the acquired title name.
12.Radio Text - During analog reception, “Title” changes to “Radio Text”, and the
acquired radio text is displayed. The “artist” and “album” are not displayed.
13.Artist - Displays the acquired artist name.
14.Album - Displays the acquired album name.
15.Indicator - LIVE: Live event broadcasts are displayed as they are received.
RBDS: RBDS data is displayed as it is received.
16.Switch page - If the title, artist name, and album title cannot fit in one page, the
display can be switched to Page 2 and beyond.
17.Preset - Switches to preset display.

**See Display Audio Owner’s Manual
HD Weather
HD Fuel Price
BLUETOOTH® OPERATION WITH DISPLAY AUDIO AND NAVIGATION SYSTEM (if equipped)
Bluetooth® Controls
Calling by Entering a Telephone Number
For a list of compatible Bluetooth® devices please go to
http://www.mitsubishicars.com/owners
1.On the mobile phone screen, enter the telephone number.
2. Touch the “OFF HOOK” key.
A
A
B
SPEECH button:
Change to voice
recognition
B
PICK-UP button:
Answer an
incoming call
C
HANG-UP button
End a call or voice
recognition
C
Registering a Bluetooth® Device
Register a Bluetooth® device with this product.
1. Press the MENU key. The top menu is displayed.
2.Touch Setting, and then Bluetooth® Setting.
3.Touch Register Device.
4. Enter the pass key displayed on the screen into the Bluetooth® device.
“OFF HOOK” key
Making a Call from a Phonebook
1. Display the vehicle phonebook screen
or the mobile phonebook screen.
**→ “Display the Phonebook”
2.Select and touch the person to call.
3. Touch the telephone number to call.
4.Touch Yes.
Incoming Calls
The audio guide sounds and the
incoming call screen is displayed.
**See Display Audio Owner’s Manual
When the connection is complete, a screen is displayed for selecting
the Bluetooth® device. For details, refer to the user manual for the
Bluetooth® device.
13
14
NAVIGATION SYSTEM (if equipped)
Search for a Location
Set Your Home as the Destination
You can set your pre-registered home as the destination.
1. Press the
key.
This displays the destination menu.
2. Touch Go Home. This displays the guidance start screen.
Search from Address
Searches for a location from an address.
1. Press the
key.
This displays the destination menu.
2. Touch Address/Intersection.
3. Touch the item, then input the address.
3. Touch Start.
4. Touch Set.
The search for the route with your home as the
destination is complete and route guidance
starts.
NOTE
• If a route using the HOV lane is in the
search result with set conditions, a
message confirms the use of the HOV
lane is displayed.
Yes: Search for a HOV lane route.
No: Search for a non-HOV lane route.
This displays the guidance start screen.
ADVICE
• Touching Last 5 allows you to select from among the last
5 searches.
• All Intersections can be selected when the street is input.
• Depending on the state of the information recorded in the
map data, representative locations for that area may be
displayed.
To Activate the Navigation Voice Command:
1. Push and hold the SPEAK button down on the steering wheel
for a couple of seconds.
2.To activate the navigation voice command, touch the SPEAK
button on the steering wheel and you will engage only that
system.
Way Points – Once you have set a destination, you can enter additional stops along the way called Way Points. For details on how to set Way Points refer
to your Navigation Owner’s Manual.
Saving Addresses - To save an address, first enter the address into the system. Then touch Address Book and confirm location to be stored.
Touch Set to Address Book to complete.
NAVIGATION SYSTEM (if equipped)
Guidance Start Screen
This is the screen displayed when the location to set as the destination is decided.
This section explains the operations you can do on this screen.
1. Location information
1)
When such location information as the “establishment name”, “street name”,
“city name”, “country name”, “latitude”, “longitude”, or “telephone number”
has been obtained, it is displayed.
2.Start
2)
The search is executed and route guidance is started.
3)
3.Dial
4)
If a mobile phone is connected, you can call the establishment.
→ “Call a Telephone Number Registered on the Map”
Refer to the Navigation Owner’s Manual for further instructions.
4. Home
If your home is not registered, you can register the searched for location as your home.
5. Show Route
Sets the currently searched for location as the destination and shows a simple sketch of the route. You can check the route and change the
search conditions.
→ “Show Route”
Refer to the Navigation Owner’s Manual for further instructions.
6. Itinerary List
You can change the destination, add waypoints, and change the route search conditions.
→ “Set and Change a Waypoint”
Refer to the Navigation Owner’s Manual for further instructions.
7. Address Book
Registers the search for location in the address book.
→ “Set an Address in the Address Book”
Refer to the Navigation Owner’s Manual for further instructions.
8. Adjust *
You can scroll the map and change the location.
* When the destination setting is set when scrolling the map, it is not displayed.
5)
6)
7)
8)
15
16
FAQ’s
Q: Is my phone compatible with the factory Mitsubishi Bluetooth® Hands Free System?
A: Check the list of compatible phones, www.mitsubishicars.com/owners to see if the phone is Bluetooth® supported.
Q. Why doesn’t my device (USB, iPhone, Bluetooth® Audio, etc.) work?
A: You need to press the Mode button to select the appropriate device you want to use.
Q: How do I use Bluetooth® Audio (if equipped)?
A: Please refer to your Owner’s Manual for instructions.
Q: Why does my Anti-Lock Braking System (ABS) make a noise?
A:Each time your vehicle is started and driven a short distance, you will hear the sound of the ABS motor operating from the right front engine
compartment. This is the normal sound the Anti-Lock Braking System makes when performing a self check.
Q: Why does the Audio System take so long to upload my music from my audio music device?
A: The Mitsubishi system can read multiple device structures in order to catalog the music files for easy playing and listening. Depending on the amount
of music you have on your device, this may take a few minutes.
Q: What are the different ways of playing music from my portable music player through the stereo system in my vehicle, when equipped with the FUSE Hands-free
Link System™?
A:There are three ways of playing music through your vehicle’s sound system.
• USB port - The FUSE system will find the songs in your device and categorize them according to Artist, Album, and Genre. Then you can have the
FUSE system find and play the song in your device that you prefer without physically searching your device. This is done via voice commands.
• Bluetooth® Streaming - Once your device is paired to the FUSE system, you can stream music from your device through the FUSE system to your
vehicles sound system. No wires or cords. Your music stops and restarts at the same song when you exit and when you re-enter the vehicle. Voice
commands are not available.
Q: Why can’t I control the music track selection via voice commands while Bluetooth® streaming?
A:The Mitsubishi system uses AVRCP 1.3 (Audio/Video Remote Control Profile) which does support song information (title, artist, track, etc.). However,
you must have a device that also supports AVRCP 1.3 to supply that information to the Mitsubishi system.
Q: My Outlander is equipped with “Micron Air Filtration”. Where is the filter located and does it need servicing?
A: The micron air filter is a small filter element which is located in the HVAC box just behind the lower glove box. The filter should be inspected
frequently for debris. The filter works well at filtering incoming air however the filter will clog and lead to reduced outlet air volume if not serviced on a
regular basis.
Q: I am having trouble with my Power Liftgate working properly. Sometimes it works and sometimes it doesn’t. Am I doing something wrong?
A: First check the ACTIVE/OFF button located below the climate control unit and check to see that this button is set to ACTIVE. If so, then you will find that
the system needs to have ALL the doors unlocked for the unit to work properly. If only the driver’s door is unlocked, the power liftgate button will not
work.
FAQ’s
Q: My Outlander has two 12V accessory outlets. What devices can be plugged into these outlets?
A:Both of these outlets are protected with 15 amp fuses. Always check the current draw rating of any device prior to use in the vehicle. If the
device is rated above 12 amps, this could lead to circuit overload and the electrical fuse opening (no current flow).
Q: How can I get the MPG stated on the window sticker?
A: Vehicle driving styles will greatly affect MPG. Avoid sudden abrupt starts from a stop and let the vehicle coast to the traffic light. Both of these
styles will increase mileage and reduce brake lining wear.
• Vehicles are designed to achieve the best fuel mileage when they are driven at the speed limits on the freeway. Avoid driving over 65 mph.
• Under inflated tires will increase rolling resistance and will reduce fuel mileage. Check tire pressure frequently to increase miles per gallon.
Proper tire pressure also ensures optimum tire performance (including tire wear.)
Q: How does the Navigation System choose a certain route?
A:The system takes into account traffic conditions, road types, distance and road width to recommend the route.
Q: Why do my Rain Sensing Windshield Wipers operate on their own when it’s not raining?
A: • When the lever is in the AUTO position, the rain sensor detects rain or snow and automatically turns on the wipers. • The wipers may automatically operate when things such as insects or foreign objects are affixed to the windshield on top of the rain sensor
or when the windshield is frosted over.
• To stop the wipers, place the lever in the OFF position.
Q: Why does my check engine light come on after I put gas in my car?
A:There are many reasons why your check engine light may illuminate. Before calling your dealership, make sure the fuel cap is fully engaged and
you have heard three clicks when tightening it. After checking and hearing three clicks and the light is still on, contact your dealership.
Q: How do I use the emergency key when the F.A.S.T.-key battery or vehicle battery is run down?
A:If your Outlander is equipped with a One Touch Start button and the door does not open, take the key out from the fob and unlock the door
manually. Put the key back into the fob and insert it into the slot provided below the Climate Control Switches. Starting the engine and charging
the operation mode should now be possible. Remove the F.A.S.T.-key from the key slot after starting the engine or charging the operation mode.
17
2014 OUTLANDER
www.mitsubishicars.com
ACAD-P08000 (4/13)