Bosch UHI-SBG-0 Installation manual

UHI-SBG-0 Indoor Housing
en
Installation Manual
| en
Important Safeguards
1. Read, Follow, and Retain Instructions - All safety and operating
instructions should be read and followed before operating the unit.
Retain instructions for future reference.
2. Heed Warnings - Adhere to all warnings on the unit and in the operating instructions.
3. Attachments - Attachments not recommended by the product manufacturer should not be used, as they may cause hazards.
4. Installation Cautions - Do not place this unit on an unstable stand,
tripod, bracket, or mount. The unit may fall, causing serious injury to
a person and serious damage to the unit. Use only manufacturer-recommended accessories, or those sold with the product. Mount the
unit per the manufacturer's instructions. Appliance and cart combination should be moved with care. Quick stops, excessive force, or
uneven surfaces may cause the appliance and cart combination to
overturn.
5. Cleaning - Unplug the unit from the outlet before cleaning. Follow any
instructions provided with the unit. Generally, using a damp cloth for
cleaning is sufficient. Do not use liquid cleaners or aerosol cleaners.
6. Servicing - Do not attempt to service this unit yourself. Opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
7. Damage Requiring Service - Unplug the unit from the main AC power
source and refer servicing to qualified service personnel under the
following conditions:
•
•
•
When the power supply cord or plug is damaged.
If liquid has been spilled or an object has fallen into the unit.
If the unit has been exposed to water and/or inclement weather
(rain, snow, etc.).
• If the unit does not operate normally, when following the operating instructions. Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may
result in damage, and require extensive work by a qualified technician to restore the unit to normal operation.
• If the unit has been dropped or the cabinet damaged.
• If the unit exhibits a distinct change in performance, this indicates
that service is needed.
8. Replacement Parts - When replacement parts are required, the service technician should use replacement parts specified by the manufacturer or that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electrical shock or
other hazards.
9. Safety Check - Upon completion of servicing or repairs to the unit,
ask the service technician to perform safety checks to ensure proper
operating condition.
Bosch Security Systems, Inc.
iii
10.Power Sources - Operate the unit only from the type of power source
indicated on the label. If unsure of the type of power supply to use,
contact your dealer or local power company.
•
For units intended to operate from battery power, refer to the
operating instructions.
• For units intended to operate with External Power Supplies, use
only the recommended approved power supplies.
• For units intended to operate with a limited power source, this
power source must comply with EN60950. Substitutions may
damage the unit or cause fire or shock.
• For units intended to operate at 24VAC, normal input voltage is
24VAC. Voltage applied to the unit's power input should not
exceed 30VAC.
User-supplied wiring, from the 24VAC supply to unit, must be in compliance with electrical codes (Class 2 power levels). Do not ground
the 24VAC supply at the terminals or at the unit's power supply terminals.
11.Coax Grounding - If an outside cable system is connected to the unit,
ensure that the cable system is grounded. U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides
information regarding proper grounding of the mount and supporting
structure, grounding of the coax to a discharge unit, size of grounding
conductors, location of discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
12.Grounding - This unit may be equipped with a 3-wire grounding plug
(a plug with a third pin, for grounding). This safety feature allows the
plug to fit into a grounding power outlet only. If unable to insert the
plug into the outlet, contact an electrician to arrange replacement of
the obsolete outlet. Do not defeat the safety purpose of the grounding plug.
•
•
•
Outdoor equipment should only be connected to the unit's inputs
after this unit has had its grounding plug connected to a grounded
outlet or its ground terminal properly connected to a ground
source.
The unit's input connectors must be disconnected from outdoor
equipment before disconnecting the grounding plug or grounding
terminal.
Proper safety precautions such as grounding should be followed
for any outdoor device connected to this unit.
13.Lightning - For added protection during a lightning storm, or when
this unit is left unattended and unused for long periods of time,
unplug the unit from the wall outlet and disconnect the cable system.
This will prevent damage to the unit due to lightning and power line
surges.
September 15, 2006 | F01U032279_01
iv
en |
Safety Precautions
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol indicates the presence of uninsulated
“dangerous voltage” within the product’s enclosure that can cause an electric shock.
This symbol indicates the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Installation should be performed by qualified service personnel only in accordance with the
National Electrical Code or applicable local codes.
Power Disconnect. An appropriate disconnect
device shall be provided as part of the building
installation.
Directive 2002/96/EC on waste electrical and
electronic equipment and its implementation in
accordance with national law, electrical tools that
have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
September 15, 2006 | F01U032279_01
Bosch Security Systems, Inc.
UHI-SBG-0 Series
v
Preface
This guide describes how to install the UHI-SBG-0 Series.
Audience
This guide is intended for qualified installation and service personnel who are familiar with the applicable national
and local electrical codes.
Document Conventions
Convention
Bold
Italic
Underline
courier
Meaning
Denotes a part, item, or assembly.
Denotes a reference to another paragraph, figure or table.
Used to emphasize a point.
Denotes the actual name of an object, the exact code that should be typed or a message
returned from a system.
Symbols
You may encounter these symbols within the document. Explanatory text accompanies each symbol, which provides
additional information detailing the operation or highlighting safety information.
i
!
NOTICE! Notices inform you of essential but non-critical information. Read these messages
carefully as any directions or instructions contained therein can help you avoid making
mistakes.
WARNING! Warnings highlight information, that if overlooked may cause damage to the
system or result in personal injury. Take warnings seriously.
Bosch Security Systems, Inc.
Installation Manual
September 15, 2006 | F01U032279_01
vi
UHI-SBG-0 Series
Customer Support and Service
If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and
shipping instructions.
Service Centers
USA
Phone: 800-366-2283 or 585-340-4162
Fax: 800-366-1329
Email: cctv.repair@us.bosch.com
CCTV Spare Parts
Phone: 800-894-5215 or 408-957-3065
Fax: 408-935-5938
Email: BoschCCTVparts@ca.slr.com
Canada
Phone: 514-738-2434
Fax: 514-738-8480
Europe, Middle East & Asia Pacific Region
Phone: 44 (0) 1495 274558
Fax: 44 (0) 1495 274280
Email: rmahelpdesk@solectron.com
For additional information, see www.boschsecurity.com
Related Publications
Refer to the latest Bosch Security Systems, Inc. Databook for the most up-to-date datasheets. To obtain a copy of
the Databook, please contact your local Bosch representative.
You can also visit the Bosch Security Systems World Wide Web site at: http://www.boschsecurity.com to view a current listings of our publications.
September 15, 2006 | F01U032279_01
Installation Manual
Bosch Security Systems, Inc.
UHI-SBG-0 Series
vii
1
Unpacking ..............................................................................................................................1
1.1
Parts List ................................................................................................................................1
1.2
Tools Required .......................................................................................................................1
2
Exploded View.......................................................................................................................2
3
Description ............................................................................................................................3
4
Cable Requirements ..............................................................................................................4
5
Installing the Housing ...........................................................................................................5
5.1
Opening the Cover .................................................................................................................5
5.2
Feed-through Wiring...............................................................................................................5
5.3
NPT Fittings............................................................................................................................5
5.4
Wire Preparation ....................................................................................................................7
5.5
Attaching the Camera and Spacer to the Tray .......................................................................8
6
Mounting the Housing ...........................................................................................................9
6.1
Installing the Camera Tray ...................................................................................................10
6.2
Connecting the Wires...........................................................................................................10
7
Operation.............................................................................................................................10
8
Maintenance ........................................................................................................................10
Bosch Security Systems, Inc.
Installation Manual
September 15, 2006 | F01U032279_01
viii
September 15, 2006 | F01U032279_01
UHI-SBG-0 Series
Installation Manual
Bosch Security Systems, Inc.
UHI-SBG-0 Series
1
Unpacking
1
Unpacking
This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are missing,
notify your Bosch Security Systems Sales or Customer Service Representative.
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.
1.1
Parts List
The following table lists the parts included:
1.2
Quantity
Part
1
Housing
1
Bracket
1
Installation manual
1
Bag of accessories
1
Wrench 3 mm HEX
1
Wrench tamperproof M3.5 T20
2
SCR 1/4 in. 20 x 5/8 in. N(+) SS
2
SCR 1/4 in. 20 x 1/2 in. N(+) SS
2
SCR 1/4 in. 20 x 3/8 in. N(+) SS
2
1/4 in. Washers
1
4 mm Spacer
1
9 mm Spacer
2
Rubber washers PG 3/8 in.
2
Rubber washers PG 1/2 in.
2
NPT fittings 3/8 in. NPT UL/CE
2
NPT fittings 1/2 in. NPT UL/CE
Tools Required
•
•
•
•
Bosch Security Systems, Inc.
Small flat blade screwdriver
Phillips screwdriver (#1 and #2)
Adjustable wrench
Wire cutter/stripper/crimper tool
Installation Manual
September 15, 2006 | F01U032279_01
2
2
Exploded View
UHI-SBG-0 Series
Exploded View
Reference
Part
1
Top cover
2
Camera tray
3
Connector block
4
Plugs
5
Front window holder
6
NPT fittings
7
Adjustable head
8
Mount head
9
J-mount base
September 15, 2006 | F01U032279_01
Installation Manual
Bosch Security Systems, Inc.
UHI-SBG-0 Series
3
Description
3
Description
The UHI-SBG-0 Series is an indoor housing which meets customer demand for appearance,
cost competitiveness, and easy installation. Removal of two tamper-resistant screws is all that
is necessary to open the cover and access the camera and lens in its mounted position. Power
and video cabling can be routed through liquid tight fittings in the rear or bottom of the housing.
Camera Ratings
0°C (32°F) - 50°C (122°F)
Ambient temperature1
Power consumption
max. 10 W
Voltage
100 - 240 VAC or for low voltage
models 12 - 28 VAC / 12 - 30 VDC
Weight camera without lens
0.45 kg (1 lb)
Weight lens max
1 kg (2.2 lb)
Temperature operating conditions
-20°C (-4°F) to 50°C (122°F)
Approvals
UL, cUL, CE, VDE, CSA
1. Maximum recommended ambient temperature camera enclosures: 50°C (122°F) with a de-rating of 0.8 °C
(1.4°F) per Watt of the rated power consumption of the camera and lens installed inside.
Bosch Security Systems, Inc.
Installation Manual
September 15, 2006 | F01U032279_01
4
4
Cable Requirements
UHI-SBG-0 Series
Cable Requirements
The specifications for the UHI-SBG-0 Series may vary depending on the model that you are
operating. Refer to the following tables for more information.
Video Transmission (coaxial)
Type
Specification
Cable Type
RG-59/U for runs < 300 m (1000 ft)
Cable Size
Outside diameter between 4.6 mm
RG-11/U for runs < 600 m (2000 ft)
(0.181 in.) -7.9 mm (0.312 in.)
Cable Shape
Round
Shield
> 93% Braided copper shield
Center Conductor
Stranded copper center
DC Resistance
< 15 Ohm/1000 (RG-59/U)
< 6 Ohm/1000 (RG-11/U)
Cable Impedance
75 Ohm
Agency Rating
UL
Environmental
Outdoor rated
Temperature Rating > 80°C
Sources
Belden 9259 H05RN-F 3 G 1.00
Input Power Cord - North American
Type
Specification
Cable Type
Rated
Cable Size
Outside diameter between
4.6 mm (0.18 in.) -7.9 mm (0.31 in.)
Cable Shape
Round
Conductors
3-conductor version
Agency Rating
UL/C.S.A., UL VW-1
Environmental
Outdoor rated
Temperature Rating 105°C
Voltage Rating
Input Power Cord - European
Type
300 V
Specification
Cable Type
H05RN-F 3 G 0.75 and H05RN-F 3 G 1.00
Cable Size
Outside diameter between
4.6 mm (0.18 in.) -7.9 mm (0.31 in.)
September 15, 2006 | F01U032279_01
Cable Shape
Round
Conductors
3-Conductor version
Agency Rating
VDE
Environmental
Outdoor rated
Installation Manual
Bosch Security Systems, Inc.
UHI-SBG-0 Series
5
Installing the Housing
5
Installing the Housing
This chapter outlines the procedures needed to install the UHI-SBG-0 Indoor Housing Series.
Installation should be made by a qualified service person and all local codes should be conformed to.
5.1
Opening the Cover
The UHI-SBG-0 housing is secured with two (2) tamper-resistant screws. To open the cover,
use the supplied tamper-resistant wrench to remove the screws.
Fig. 5.1 Opening the Cover
5.2
Feed-through Wiring
The UHI-SBG-0 features feed-through wiring holes which are used to feed the cabling through.
Prior to mounting the camera, remove the rear (2) or bottom (2) rubber dome plugs and
install the NPT fittings (see Section 5.3: NPT Fittings).
5.3
NPT Fittings
The NPT fittings ensure a tight seal. Depending on how the UHI-SBG-0 is mounted, the NPT fittings can be installed either in the rear or from the bottom of the housing. The supplied 3/8 in.
NPT fittings accept a round cable with diameters from 4.3 mm (0.17 in.) to 11.4 mm (0.45 in.).
The two larger 1/2 in. NPT fittings accept cables with diameters from 6.5 mm (0.26 in.) to
10.5 mm (0.42 in.).
Fig. 5.2 Installing the NPT Fittings
Screw Nut (discard if using 3/8 in. NPT for bottom openings)
Rubber Washer
NPT Fitting
Sealing Nut
Fig. 5.3 NPT Exploded View
Bosch Security Systems, Inc.
Installation Manual
September 15, 2006 | F01U032279_01
6
Installing the Housing
UHI-SBG-0 Series
Installing the NPT Fittings
1.
Determine to use either the rear or bottom gland holes and remove the (2) rubber hole
plugs.
2.
Remove the screw inside the housing that holds the camera tray. Set screw aside.
3.
Unlock and remove the tray by sliding it toward the rear of the housing. Set tray aside.
4.
Attach the two (2) 1/2 in. NPT fittings with the rubber washer on the outside of the housing directly to the rear hole openings (see Figure 5.4 on page 6).
Fig. 5.4
Attaching the 1/2 in. NPT Fittings
- or Attach the two (2) 3/8 in. NPT fittings (discard the screw nut) with the rubber washer on
the outside of the housing directly to the bottom openings (see Figure 5.5 on page 6).
Fig. 5.5
5.
Attaching the 3/8 in. NPT Fittings
Cover any unused holes with the provided dome plugs supplied with the housing.
NOTE! Tighten all fittings to ensure a secure liquid-tight seal. Failure to do so could allow
i
moisture to enter the housing and damage the camera and lens. If a sealant is used, be sure it
is a neutral cure type. Sealants that release acetic acid may harm camera electronics. Use of
drip loops is recommended on the wiring outside of the rear end cap.
September 15, 2006 | F01U032279_01
Installation Manual
Bosch Security Systems, Inc.
UHI-SBG-0 Series
5.4
Installing the Housing
7
Wire Preparation
Supply the UHI-SBG-0 with power by using a power cord that complies with the Nec 400-4
CEC rule 4-010 and is marked with INDOOR, W or W-A. For 24 V cameras, use the recommended maximum cable length chart for selecting the proper wire size.
Wire Size AWG
Housing Distance
0.5
20
27 m (90 ft)
1
18
42 m (140 ft)
1.5
16
67 m (220 ft)
2.5
14
108 m (355 ft)
4
12
172 m (565 ft)
Wire Size mm2
Table 5.1 Maximum cable lengths for 24 V camera housings
Preparing the Power Supply
Cut the power cord on 120 VAC and 230 VAC camera models; leave enough cable to allow a
connection to the terminal block. Strip no less than 6 mm (0.25 in.) and no more than 8 mm
(0.31 in.) of insulation away from the wire. Do not nick the wires.
Preparing the Terminal Block
Wire sizes larger than 2.5 mm2 (14 AWG) require a splice to accommodate the terminal block.
The terminal block accepts wires ranging from 0.5 to 2.5 mm2 (20 to 14 AWG). When using
larger wire sizes, splice to a smaller size wire at the terminal block end. The splice may need
to be enclosed in a junction box if it does not pass through the fittings.
WIRING DIAGRAM
12 V - 230 V AC/DC L
N
GND
Camera
.............
(not used) X
Fig. 5.6 Terminal Wiring
WARNING! External interconnecting cables are to be installed in accordance to NEC, ANSI/
NFPA70 (for US application) and Canadian Electrical Code, Part I, CSA C22.1 (for CAN
!
application) and in accordance to local country codes for all other countries.
Branch circuit protection incorporating a 20 A, 2-pole Listed Circuit Breaker or Branch Rated
Fuses are required as part of the building installation. A readily accessible 2-pole disconnect
device with a contact separation of at least 3 mm must be incorporated.
Bosch Security Systems, Inc.
Installation Manual
September 15, 2006 | F01U032279_01
8
5.5
Installing the Housing
UHI-SBG-0 Series
Attaching the Camera and Spacer to the Tray
The UHI-SBG-0 includes two (2) spacers which may be required to keep the camera level (see
Figure 5.7 on page 8). If a spacer is not used, the camera may dip down creating a port hole
effect.
Camera and Spacer Installation
1.
Attach the lens to the camera.
2.
Tentatively place the camera tray inside the housing. Do not secure.
3.
Determine if one of the supplied spacers are required and place on top of the lower portion of the tray as seen in Figure 5.7 on page 8.
4.
Place the camera in the up-right position inside the housing with the lens approximately
1/8 in. away from the housing window (lens should not touch window).
Fig. 5.7
5.
Attaching the Camera and Spacer to the Tray
Hold all three (3) components in place (tray, spacer, and camera) and remove from housing. Turn components over and secure with 1/4-20 x 5/8 in. screw and large flat washer.
6.
Set aside.
September 15, 2006 | F01U032279_01
Installation Manual
Bosch Security Systems, Inc.
UHI-SBG-0 Series
6
Mounting the Housing
9
Mounting the Housing
The UHI-SBG-0 housing includes a J-mount which features a removable camera bracket and
locking grooves to keep the housing from drooping. The mount is vertically adjustable by
pushing the housing up or down.
Mounting Procedure
1.
Determine a proper location for the housing.
2.
Insert the coax and power lead wires from the wall through the supplied J-mount allowing enough slack to pull through the housing (see Figure 6.1 on page 9 if using the bottom
glands or see Figure 6.2 on page 9 if using the rear glands).
.
Fig. 6.1 Feeding the Wire using the Bottom NPT Fittings
Fig. 6.2 Feeding the Wire using the Rear NPT Fittings
3.
Prepare the surface for mounting and install the J-mount.
Fig. 6.3 Mounting the J-mount and Housing
4.
Place the UHI-SBG-0 housing on top of the J-mount while feeding the wires through the
bottom or rear NPT fittings.
5.
Bosch Security Systems, Inc.
Make sure that the weight of the camera is distributed evenly.
Installation Manual
September 15, 2006 | F01U032279_01
10
Operation
UHI-SBG-0 Series
6.
Secure the housing to the mount by attaching two 1/4-20 x 0.50 in. screws and two 1/4
in. washers. The washers must be used for the screws to thread properly.
NOTE! The outermost set of 1/4-20 threaded holes are for mounting to feed-through mounts
i
6.1
and the innermost 1/4-20 holes are for mounting to all other mounts and pan/tilts (see Figure
1). For mounting to all other mounts and pan/tilts, refer to the specific device’s installation
guide.
Installing the Camera Tray
Verify operation of the camera and lens and adjust the camera focus and iris as necessary. See
the instruction manual for your specific camera.
Installing the Camera Tray
1.
Slide the camera tray with attached camera (see Section 5.5: Attaching the Camera and
Spacer to the Tray) into the slot of the housing.
2.
6.2
Secure the camera tray with screw.
Connecting the Wires
Before proceeding, verify that the BNC for the Video Coax Cable is separated from the mains
power connections / circuitry and there is a physical spacing barrier between cables. For wiring video coax connections, use only the cables specified in Section 4: Cable Requirements.
Connecting the Wires
1.
Attach the BNC connector to the coax.
2.
Connect the coax cable to the camera.
3.
Connect the power leads from the source to the terminated block.
4.
Connect the wires from the terminal block to the camera.
5.
Tighten the fittings to 8.5 N.m to 9.0 N.m (75 in. lb to 80 in. lb). The torque rating is
approximately 1 to 1-1/2 turns past the point where the fitting starts to grip the wire.
•
•
•
7
Tighten all fittings to ensure a liquid-tight seal. Failure to do so could allow moisture
to enter the housing and damage electronic parts, camera, and lens.
If a sealant is used, be sure it is a neutral cure type. Sealants that release acetic acid
may harm camera electronics.
Use of drip loops is recommended on the wiring outside of the rear end cap.
6.
Use the provided hole plugs to plug any unused holes.
7.
Close the cover and secure the tamper-resistant screws with the supplied wrench.
Operation
These housings require no operational adjustments other than camera/lens adjustments.
8
Maintenance
No special maintenance is required other than occasional cleaning of the window. The window can be cleaned with water or any non aggressive liquid. Regularly scheduled maintenance
will help prolong the operation life of this unit. Clean the viewing window as needed with a
mild, nonabrasive detergent in water and a soft cloth.
September 15, 2006 | F01U032279_01
Installation Manual
Bosch Security Systems, Inc.
Americas:
Bosch Security Systems
130 Perinton Parkway
Fairport, New York, 14450
USA
Phone
+1 800 289 0096
Fax
+1 585 223 9180
www.boschsecurity.us
© Bosch Security Systems, Inc. 2006
Europe, Middle East, Asia:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven
The Netherlands
Phone
+31 (0) 40 27 83955
Fax
+31 (0) 40 27 86668
www.boschsecurity.com
Asia-Pacific:
Bosch Security Systems Pte Ltd.
38C Jalan Pemimpin
Singapore 577180
Phone
+65 6319 3450
Fax
+65 63139 3499
www.boschsecurity.com