HP Deskpro EN 6533 Specifications

Illustrated Parts & Service Map
HP ProDesk 600 G1 - Small Form Factor
© 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Document Number 723285-001. 1st Edition July 2013.
Cables
Key Specifications
Processor Type
Intel® Core i7, i5
RAM Type
Non-ECC DDR3 PC3-12800 (1600 MHz)
Maximum RAM
32 GB
Expansion Slots
•
•
Chipset
Intel Q85
Graphics Adapter
Integrated Intel HD graphics
Bays
•
•
•
•
I/O Interfaces
Front: (2) USB 3.0 ports, (2) USB 2.0 ports, headphone jack,
microphone jack
Rear: (2) USB 3.0 ports, (4) USB 2.0 ports, (2) DisplayPort,
VGA, serial port, PS/2 mouse and keyboard, RJ-45 network
connector, 3.5mm audio in/out jacks
Preinstalled Operating
Systems
•
•
•
•
1
Front I/O assembly
732755-001
2
Power switch assembly
732756-001
3
SATA drive power cable
732759-001
*
Hard drive SATA cable, 14 inch, 1 straight end, 1 angled end
732753-001
*
Optical drive SATA cable, 19.5 inch, 2 straight ends
638813-001
*
DMS-59 to dual VGA cable
463023-001
*
Adapter, DisplayPort to VGA
632484-001
*
Adapter, DisplayPort to DVI
662723-001
*
Adapter, DisplayPort to HDMI
617450-001
*
Adapter, DVI to VGA
657401-001
*
Adapter, DVI-I to VGA
720216-001
*
DisplayPort cable
487562-001
*Not shown
(1) PCIe-x16
(3) PCIe-x1
Keyboards (not illustrated)
(1) Slimline optical drive bay
(1) external 3.5-inch
(1) internal 3.5-inch storage drive bay
(1) internal 2.5-inch storage drive bay
Windows 8
Windows 7
Novell SUSE Linux Enterprise Desktop 11
FreeDOS 2.0
Spare Parts
PS/2
USB
Wireless
Smart card
Smart card, CCID
Wireless (keyboard, mouse, dongle)
Washable*
724718-xx1
724720-xx1
724722-xx1
701427-xx1
701671-001
730323-xx1
700510-xx1
Arabic
-17x
LA Spanish
-16x
Belgian
-18x
Norwegian
-09x
Brazilian Portuguese
-20x
People’s Republic of China
-AAx
Bulgaria
-26x
Portuguese
-13x
Czech
-22x
Romanian
-27x
Danish
-08x
Russian
-25x
Finnish
-35x
Saudi Arabia
-DEx
French
-05x
Slovakian
-23x
French Canadian
-12x
South Korea
-KDx
German
-04x
Spanish
-07x
Greek
-15x
Swedish
-10x
Hebrew
-BBx
Swiss
-11x
Hungarian
-21x
Taiwanese
-ABx
International
-37x
Thai
-28x
International English
-L3x
Turkish
-14x
Italian
-06x
U.S.
-00x
Japanese
-29x
U.K.
-03x
*-001, -121, -161, -201 only
Mass Storage Devices (not illustrated)
System Unit
1
Front bezel
732757-001
DVD-ROM drive
2
Access panel
732760-001
DVD±RW drive
657958-001
3
Power supply, 92% efficient
702455-001
Blu-ray BD-RW SuperMulti XL Drive
719157-001
*
Power supply, 90% efficient
702456-001
2 TB, 7200 rpm hard drive
616608-001
*
Power supply, standard
702457-001
1 TB, hybrid SSD, 2.5-inch hard drive
724937-001
*
Optical drive bezel blank
732769-001
1 TB, 7200 rpm hard drive
613202-001
* Not shown
HP ProDesk 600 G1, SFF Chassis
608394-001
500 GB hard drive, hybrid SSD, 2.5-inch hard drive
724938-001
500 GB, 7200 rpm hard drive, self-encrypting (SED), 2.5-inch hard drive
696442-001
500 GB, 7200 rpm hard drive
613208-001
256 GB Solid State Drive (SSD), self-encrypting (SED)
680020-001
160 GB Solid State Drive (SSD)
646809-001
128 GB Solid State Drive (SSD)
665961-001
128 GB Solid State Drive (SSD), TCG
728559-001
120 GB Solid State Drive (SSD)
661841-001
723285-001
page 1
Standard and Optional Boards (not illustrated)
System board (includes replacement thermal material)
System board for use in models without Windows 8
696794-001
System board for use in models with Windows 8 Standard
696794-501
System board for use in models with Windows 8 Professional
696794-601
System board for use in models with Windows 8 Professional
726848-001
Memory modules (PC3-12800, CL11)
8-GB
689375-001
4-GB
671613-001
2-GB
671612-001
Other boards
Miscellaneous Parts
nVidia Quadro NVS315 PCIe x16 graphics card, 1 GB
720837-001
nVidia Quadro NVS310 PCIe x16 graphics card, 512 MB
707252-001
1
Fan sink
727150-001
AMD Radeon HD8490 PCIe x16 graphics card, 1 GB
717219-001
2
Fan duct
727145-001
AMD Radeon HD8350 DH PCIe x16 graphics card, 1 GB DDR3
717220-001
3
Speaker, 40mm x 70mm
727149-001
Intel PRO/1000 single port GbE NIC, includes bracket
728562-001
4
Hood sensor
638816-001
HP WLAN 802.11 a/b/g/n 2x2 PCIe module
695915-001
*
Card reader, 14-in-1, USB 3.0, 3.5-inch
716390-001
HP WLAN/Bluetooth module
733687-001
*
Solenoid lock
732772-001
Intel Core i7 processors (include thermal material)
*
Printer port, PCI card
638817-001
4770, 3.4 GHz, 8-MB L3 cache
*
HP Ultraslim Keyed Cable Lock
703372-001
Intel Core i5 processors (include thermal material)
*
Rubber foot
583654-001
4670, 3.4 GHz, 6-MB L3 cache
727381-001
*
Chassis stand
688952-001
4570, 3.2 GHz, 6-MB L3 cache
727380-001
*
Serial port, PCI card
638815-001
*
Adapter, 2.5-inch hard drive
586721-001
*
Hard drive grommet for use on 2.5-inch drives
594220-001
*
Hard drive grommet for use on 3.5-inch drives
450712-001
*
Hard drive carrier, 2.5-inch to 3.5-inch
703597-001
*
Hard drive conversion bracket
397117-001
*
WLAN antennas
583345-001
*
Mouse, PS2, optical
674315-001
*
Mouse, USB, HP Elite
674318-001
*
Mouse, washable
724795-001
*
Mouse, wireless, HP Elite
674317-001
*
Mouse, USB, optical
674316-001
*Not shown
Common POST Error Messages
Screen Message
Probable Cause
Recommended Action
101-Option ROM Error
1. System ROM checksum
error.
1. Verify ROM, reflash if required
2. Remove suspected card,
reboot
3. Clear CMOS memory, reboot
4. Replace system board
2. Expansion board option
ROM checksum
103-System Board
Failure
DMA, timers
1. Clear CMOS memory.
2. Remove expansion boards.
3. Replace system board.
164-Memory Size Error
and
201-Memory Error
Incorrect memory configuration
1. Run Setup (F10).
2. Check DIMMs for proper
seating, type, and HP
compatibility.
3. Remove DIMMs singularly and
reboot to isolate faulty DIMM.
4. Replace system board.
214-DIMM Configuration
Warning
Populated DIMM configuration is not optimized
Rearrange the DIMMs so that
each channel has the same
amount of memory.
301-, 304-Keyboard
error
Keyboard failure.
Check keyboard connection or
keys. Check connector for bent or
missing pins. Replace keyboard. If
304, possible system board problem.
Diagnostic LEDs
LED
Color
LED Activity
State/Message
Power
White
On
Computer on
Power
White
1 blink every 2 seconds
Normal Suspend Mode
Power
Red
1 blink every second followed
by a 2 second pause
CPU thermal shutdown
Power
Red
3 blinks, 1 blink every second
followed by a 2 second pause
Processor not installed
Power
Red
4 blinks, 1 blink every second
followed by a 2 second pause
Power failure (power supply overload)
Power
Red
5 blinks, 1 blink every second
followed by a 2 second pause
Pre-video memory error
Power
Red
6 blinks, 1 blink every second
followed by a 2 second pause
Pre-video graphics error
Power
Red
7 blinks, 1 blink every second
followed by a 2 second pause
System board failure (ROM
Power
Red
8 blinks, 1 blink every second
followed by a 2 second pause
Invalid ROM based on Checksum
Power
Red
9 blinks, 1 blink every second
followed by a 2 second pause
System powers on but is unable to
boot
Power
Red
10 blinks, 1 blink every second
followed by a 2 second pause
Bad option card
Power
Red
11 blinks, 1 blink every second
followed by a 2 second pause
Current processor does not support a
feature previously enabled.
none
none
System does not power on and
LEDs are not flashing
System unable to power on
HP ProDesk 600 G1, SFF Chassis
727373-001
501-Display Adapter Fail- Graphics display controller.
ure
1. Reseat graphics card.
2. Clear CMOS.
3. Check monitor connection.
4. Replace graphics card.
1720-SMART Hard Drive
Detects Imminent Failure
1. Determine if hard drive is giving
correct error message. Enter
Computer Setup and run the
Drive Protection System test
under Storage > DPS Self-test.
2. Apply hard drive firmware
patch if applicable.
3. Back up contents and replace
hard drive.
723285-001
Hard drive is about to fail.
page 2
System Setup and Boot
Device Options - Allows you to set:
• Printer mode (Bi-Directional, EPP + ECP, Output Only)
• Num Lock State at Power-on (off/on)
• Integrated Video (enable/disable)
• Integrated Graphics (Auto/Disable/Force)
• Internal Speaker (enable/disable)
• NIC PXE Option ROM Download (enable/disable)
• SATA RAID Option ROM Download (enable/disable)
• Multi-Processor (enable/disable)
• Hyper-threading (enable/disable)
• Turbo Mode (enable/disable)
Access the Setup Utility during computer boot by pressing the F10 key. If you do not press F10
at the appropriate time, you must restart the computer and again press F10 when the monitor
light turns green. NOTE: Not all settings are available for all models.
Computer Setup Menu
Heading
Option/Description
File
System Information - Lists the following main system specifications:
•
•
•
•
•
•
Product name
SKU number (some models)
Processor type/speed/stepping
Cache size (L1/L2/L3)
Installed memory size/speed/ch
Integrated MAC Address
•
•
•
•
•
System BIOS
Chassis serial number
Asset tracking number
ME firmware version
ME management mode
VGA Configuration - Allows you to specify which VGA controller is the “boot”/
primary. Displayed only if add-in video card installed.
AMT Configuration - Allows you to set:
• AMT (enable/disable)
• Unconfigure AMT/ME (enable/disable)
• Hide Unconfigure ME Confirmation Prompt (enable/disable)
• Watchdog Timer (enable/disable)
About - Displays copyright notice.
Set Time and Date - Allows you to set system time and date.
Replicated Setup - Allows you to save or restore system configuration to/from
a USB flash drive.
Default Setup - Allows you to save current settings as default or restore factory settings as default.
Apply Defaults and Exit - Applies the selected default settings and clears any
established passwords.
Ignore Changes and Exit - Exits Computer setup without saving changes.
Save Changes and Exit - Saves changes to system configuration or default settings and exits Computer Setup.
Storage
Device Configuration - Lists all installed BIOS-controlled storage devices. The
following options are available:
•
•
•
•
CD-ROM
Hard Disk
Default Values
Translation Mode
•
•
•
•
SSD Life Used
SMART (ATA disks only)
Diskette
SATA Defaults
Establishing a Setup or Power-On password:
1. Turn on or restart the computer.
2. As soon as the computer turns on, press the Esc key while “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
3. Press the F10 key to enter Computer Setup.
4. To establish Setup password, select Security > Setup Password and follow the instructions.
- or To establish a Power-On password, select Security > Power-On Password and follow the
instructions on the screen
5. Before exiting, click File > Save Changes and Exit.
Storage Options - Allows you to set:
• SATA Emulation - Choose how the SATA controller and devices are accessed
by the OS. SATA Emulation choices are AHCI, RAID, or IDE.
• Removable Media Boot - Enables/disables ability to boot the system from
removable media.
DPS Self-Test - Execute self-tests on ATA hard drives capable of performing
the Drive Protection System (DPS) self-tests.
Boot Order - Specify boot order for UEFI and legacy boot sources. Also specify
hard drive boot order.
• Shortcut to Temporarily Override Boot Order
Security
Password Security
Setup Password - Set and enable the setup (Admin) password.
Power-On Password - Set and enable power-on password.
Changing a Setup or Power-On password:
1. Turn on or restart the computer.
To change the Setup password, go to step 2.
To change the Power-on password, go to step 3.
2. To change the Setup password, as soon as the computer turns on:
- Press the Esc key while “Press the ESC key for Startup Menu” message is displayed.
- Press the F10 key to enter Computer Setup.
3. When the key icon appears, type your current password, a slash (/) or alternate delimiter
character, your new password, another slash (/) or alternate delimiter character, and your
new password again as shown:
current password/new password/new password.
NOTE: Type the new password carefully since the characters do not appear on the screen.
4. Press Enter.
Password Options - Allows to you enable/disable:
• Lock Legacy Resources
• Setup Browse Mode
• Password prompt on F9 & F12
• Network Server Mode
The new password will take effect the next time the computer is restarted.
Deleting a Power-On or Setup password
1. Turn on or restart the computer.
Smart Cover - Allows you to lock/unlock the smart cover and set the cover
removal sensor to disable/notify user/setup password.
To delete the Setup password, go to step 2.
To delete the Power-On password, go to step 3.
Device Security - Set Device Available/Device Hidden for: embedded security device,
system audio, network controller, USB controller, serial/parallel ports, and SATA
ports.
2. To change the Setup password, as soon as the computer turns on:
- Press the Esc key while “Press the ESC key for Startup Menu” message is displayed.
- Press the F10 key to enter Computer Setup.
USB Security - Set Device Available/Device Hidden for front USB ports, rear USB
ports, internal USB ports, accessory USB ports.
Slot Security - Disable the PCI, PCIe, and Mini Card slots.
3. When the key icon appears, type your current password followed by a slash (/) or alternate
delimiter character as shown. Example: currentpassword/
4. Press Enter.
Network Boot - Enables/disables boot from OS (NIC models only).
System IDs - Allows you to update asset tag, ownership tag, UUID, keyboard
locale setting.
Clearing CMOS
1. Turn off the computer and disconnect the power cord from the power outlet.
Master Boot Record Security - enables/disables MBR.
2. Remove the access panel.
System Security - Allows you to set:
• Data Execution Prevention (enable/disable)
• SVM CPU Virtualization (enable/disable).
• Virtualization Technology (VTx) (enable/disable)
• Virtualization Technology/Directed IO (VTd) (enable/disable)
• Trusted Execution Technology (enable/disable)
• Embedded Security Device (enable/disable)
• Reset to Factory Settings (Do not reset/Reset)
• Measure boot variables/devices to PCR1 (enable/disable)
• OS management of Embedded Security Device (enable/disable)
• Reset of Embedded Security Device through OS (enable/disable)
• No PPI provisioning (Windows 8 only; enable/disable)
• Allow PPI policy to be changed by OS (enable/disable)
3. On the system board, press and hold the CMOS button for 5 seconds.
4. Replace the chassis access panel and reconnect the power cord.
5. Turn on the computer and allow it to start.
DriveLock Security - Allows you to assign or modify a master or user password
for hard drives.
Secure Boot Configuration (Windows 8 only)
• Legacy Support (enable/disable)
• Secure Boot (enable/disable).
• Key Management (enable/disable)
• Fast Boot (enable/disable)
Power
OS Power Management - Allows you to enable/disable Runtime Power Management, Idle Power Savings, Unique Sleep State Blink Rates.
Hardware Power Management - Enable/disable SATA power management, S5 maximum power savings., PCI slots, network controller, USB 3.0 controller
Thermal - Control minimum fan speed.
Advanced
Power-On Options - Allows you to set:
• POST mode (QuickBoot, Clear Memory, FullBoot, or FullBoot Every x Days)
• POST messages (enable/disable)
• Press the ESC key for Startup Menu (enable/disable)
• Option ROM Prompt (enable/disable)
• After Power Loss (off/on/previous state)
• POST Delay (none, 5, 10, 15, 20, or 60 seconds)
• Remote Wakeup Boot Source (remote server/local hard drive)
• Factory Recovery Boot Support (enable/disable)
• Bypass F1 Prompt on Configuration Changes (enable/disable)
BIOS Power-On - Set the computer to turn on at a preset time.
Advanced
(continued)
Bus Options - Allows you to enable/disable PCI SERR# Generation and PCI VGA
palette snooping.
Onboard Devices - Allows you to set resources for or disable on-board system
devices.
HP ProDesk 600 G1, SFF Chassis
723285-001
page 3
System Board
System Board Connectors and Jumpers (component location may vary)
X1PCIEXP3
PCI Express x1 slot
DIMM2
Memory socket - Channel B
X1PCIEXP2
PCI Express x1 slot
DIMM1
Memory socket - Channel B
X!PCIEXP1
PCI Express x1 slot
PB/LED
Power switch connector
X16PCIEXP
PCI Express x16 slot
PWR CMD
Power connector
Optical drive power connector
IN//OUT
Audio connectors
SATA PWR0
USB
USB connectors
PWR
Main power connector
VGA/COMA
Monitor connector/serial port
FRONT USB 3.0
Front USB 3.0 port connector
DISPLAYPORT
DisplayPort connector
SPKR
Speaker connector
RJ45/USB
Network/USB connectors
SATA0
Primary hard drive
PS2
PS/2 keyboard/mouse connectors
SATA1
Any SATA Device other than the primary hard drive
CHFAN2
System fan connector
SATA2
Any SATA Device other than the primary hard drive
PWRCPU
CPU power connector
SATA3
Any SATA Device other than the primary hard drive
HLOCK
Hood lock connector
MEDIA
Media card reader connector
HSENSE
Hood sensor connector
FRONT_USB
1st USB connector
XU1
Processor socket
PSWD
Password header
CHFAN
Fan connector
BAT
RTC battery socket
CMOS
CMOS header
COMB
Serial port
DIMM4
Memory socket - Channel A
PAR
Parallel port connector
DIMM3
Memory socket - Channel A
FRNT AUD
Front panel connector
HP ProDesk 600 G1, SFF Chassis
723285-001
page 4