User manual
Cooker
Top Oven/Grill
ZKG5030
Back Left
Front left
Front Reight
Back Reight
Thank you for selecting our
appliance
We wish you lots of enjoyment with your new
appliance and we hope that you will consider
our brand again when purchasing household
appliances.
Please read this user manual carefully and
keep it throughout the product life cycle as a
reference document. The user manual should
be passed on to any future owner of the
appliance.
Contents
Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ 3
Cooking tables _ _ _ _ _ _ _ _ _ _ _ _ _ _ 19
Description of the appliance _ _ _ _ _ _ _ _ 5
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ 21
Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7
What to do if... _ _ _ _ _ _ _ _ _ _ _ _ _ _ 25
Grill and oven furniture _ _ _ _ _ _ _ _ _ _ 8
Technical Data _ _ _ _ _ _ _ _ _ _ _ _ _ _ 26
The hob _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 28
The grill _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11
Environmental Information _ _ _ _ _ _ _ _ 33
The top oven _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15
Guarantee/Customer Service _ _ _ _ _ _ 33
The main oven _ _ _ _ _ _ _ _ _ _ _ _ _ _ 16
Subject to change without notice
2
Safety instructions
General safety
These warnings are provided in the interest of
your safety. Ensure that you understand them
all before installing or using the appliance. Your
safety is of paramount importance. If you are
unsure about any of the meanings of these
warnings please contact customer care.
Installation
• The appliance must be installed according
to the instructions supplied.
• The installation work must be undertaken by
a qualified electrician or competent person
as stated in the Gas Safety (Installation &
Use) Regulations current editions and the
IEE Wiring Regulations.
• For appliances installed in the Republic of
Ireland please refer to NSAI - Domestic Gas
installation IS813 Current Editions.
• The appliance should be serviced by an authorised Service Engineer and only genuine
approved spare parts should be used.
• It is important that the appliance is suitable
for your gas supply. Your installer should
check the rating plate.
• Make sure that a stability chain is fitted.
• The appliance must be installed in an
adequately ventilated room.
• If the appliance is to be placed on a base,
measures must be taken to prevent the appliance from slipping.
• This appliance is heavy and care must be
taken when moving it.
• Do not attempt to lift or move this appliance
by the handles.
• All packaging, both inside and outside the
appliance must be removed before the appliance is used.
• It is dangerous to alter the specifications or
modify the appliance in any way.
Child safety
• Do not allow children to play with any part of
the packaging.
• Do not allow children to sit or climb on the
drop down doors.
• This appliance is not intended for use by
children and other persons whose physical,
sensory or mental capabilities or lack of experience and knowledge prevents them from
using the appliance safely without supervision or instruction by a responsible person
to ensure that they can use the appliance
safely.
• Children should be supervised to ensure that
they do not play with the appliance.
WARNING!
Accessible parts may be hot during use. Young
children should be kept away.
During use
• This appliance is not intended to be operated
by means of an external timer or separate
remote control system.
• This appliance has been designed for domestic use to cook edible foodstuffs only and
must not be used for any other purposes.
• Take great care when heating fats and oils,
as they will ignite if they become too hot.
3
• When you are lighting any burner check that
it is lit before you leave the appliance. When
turning off a burner, do not leave the appliance until the flame has gone out.
• Never place plastic or any other material,
which may melt in or on the oven.
• Do not leave the grill pan handle in position
when grilling, as it will become hot.
• Always support the grill pan when it is in the
withdrawn or partially withdrawn position.
• Always use oven gloves to remove and replace the grill pan handle when grilling.
• Always use oven gloves to remove and place
food in the oven.
• Ensure cooking utensils are large enough to
contain foods to prevent spillage and boil
over.
• The handles of saucepans, which are
smaller than the heated area on the hob, will
become hot.
• Ensure your hand is protected before handling the pan.
• During use the appliance becomes hot. Care
should be taken to avoid touching heating
elements inside the oven.
• Ensure that all vents are not obstructed to
ensure ventilation of the oven cavity.
• Never line any part of the appliance with foil.
• Always stand back from the appliance when
opening the doors to allow any build up of
steam or heat to release.
WARNING!
Never leave the appliance unattended when
the oven door is open.
• Do not place sealed cans or aerosols inside
the oven. They may explode if they are
heated.
4
• Ensure that all control knobs are in the off
position when not in use.
• Do not stand on the appliance or on the open
oven doors.
• Do not hang towels, dishcloths or clothes
from the appliance or its handles.
• Do not use this appliance if it is in contact
with water.
• Never operate it with wet hands.
Cleaning and maintenance
WARNING!
For hygiene and safety reasons this appliance
should be kept clean at all times. A build-up of
fat or other foodstuff could result in a fire
especially in the grill pan.
• Do not leave the cookware containing foodstuff, e.g. fat or oil in the appliance in case it
is inadvertently switched on.
• Do not disconnect the appliance from the
gas supply if the supply pipe does not have
a bayonet connection as described in the installation section. If this is the case contact
the person who installed the appliance.
• Always allow the appliance to cool before
switching off before carrying out any cleaning/maintenance work.
• Only clean this appliance in accordance with
the instructions given in this book.
• Never use steam or high-pressure steam
cleaners to clean the appliance.
• Do not use harsh abrasive cleaners or sharp
metal scraper to clean the oven door glass
since they can scratch the surface, which
may result in shattering of the glass.
Description of the appliance
Product description
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
Glass Hob Lid
Pan Supports
Control Panel
Top Oven Door
Main Oven Door
Grill Pan Grid
Grill Pan
Shelf
Levelling Feet
5
Controls and their functions
1
2
3
4
5
6
7
6
Top Oven/Grill
Main Oven
1
2
Top Oven/Grill Knob
Main Oven Knob
Left Medium Burner Knob
Large Burner Knob
Small Burner Knob
Right Medium Burner Knob
Ignition Button
Back Left
3
Front Left
Front Right
Back Right
4
5
6
7
Before first use
Rating plate
• This is usually situated on the front frame of
the appliance and can be seen upon opening
the door.
Alternatively the rating plate may also be
found on the back or top of some models
(where applicable).
• Do not remove the rating plate from the
appliance as this may invalidate the guarantee.
Preparing to use your
appliance
• Carefully check whether there is any damage after you unpack the appliance. If there
is any defect; do not use the appliance and
contact your retailer immediately. As the materials used for packaging (nylon, stapler,
Styrofoam etc.) may cause harmful effects
to children, they should be collected and removed immediately.
• For your safety wall coverings at the rear of
the appliance should be securely fixed to the
wall.
• Wipe over the base of the oven(s) with a soft
cloth using hot soapy water. Wash the oven
furniture before use.
• We suggest that you run the oven(s) and grill
for 10 – 15 minutes at maximum tempera-
ture, to burn off any residue from their surfaces. Accessible parts may become hotter
than in normal use. Children should be kept
away. During this period an odour may be
emitted, it is therefore advisable to open a
window for ventilation.
Condensation and steam
• When food is heated it produces steam similar to a boiling kettle. The vents allow some
of this steam to escape. However, always
stand back from the appliance when opening
the door(s) to allow any build up of steam or
heat to release.
• If the steam comes into contact with a cool
surface on the outside of the appliance, e.g.
a trim, it will condense and produce water
droplets. This is quite normal and is not
caused by a fault on the appliance.
• To prevent discolouration, regularly wipe
away condensation and foodstuff from surfaces.
Cookware
• Do not use baking trays larger than
25cmx30cm (10") (12") as they will restrict
the circulation of heat and may affect performance.
7
Grill and oven furniture
• The following items of grill and oven furniture
have been supplied with the appliance. If you
require replacements of any of the items listed below please contact your local service
force centre.
1 straight shelf
(For grilling and top
oven cooking)
1 grill pan
2 straight shelves
(For main oven cooking)
1 grill pan handle
1 grill pan grid
8
The hob
The gas hob has different burner sizes to suit different To ensure maximum burner efficiency only use pots
types of cooking.
and pans with flat bases appropriate to the burner size
used.
Using the hob
To light the hob burners
The hob ignition works by means of a battery.
Lift up the lid. You can not use the hob when
the lid is down.
Push in and hold the control knob, turn to the large
flame symbol (highest setting).
Press the ignition button
immediately. Keep the
control knob depressed
for up to 5 seconds, but no
longer than 10 seconds.
After this time release the controls. The flame should
remain alight. If after 10 seconds the burner has not lit,
stop operating the appliance and wait at least 1 minute
before attempting a further ignition of the burner. When
the burner has lit release the control and ignition button,
adjust the setting as required.
WARNING!
In the event of the burner flame being
accidentally extinguished, turn off the burner
control and do not attempt to re-ignite the
burner for at least 1 minute.
WARNING!
If the ignition button is not pressed immediately
a build up of gas may cause the flame to spread.
WARNING!
Ensure the pan supports are correctly fitted before using the hob.
9
Pans
To get the best efficiency from your appliance
and for your safety, use the following pan sizes
for each burner.
Rapid Burner: 22-26 cm
Medium Burner: 14-22
cm
Auxillary Burner: 12-18
cm
To turn off any burner
Turn the control knob to the off position. This is shown
by a dot. Turn knob clockwise until dot position is
reached. Do not attempt to turn the burner off by turning
the knob counter-clockwise.
WARNING!
When lighting any burner, ensure that it is lit
before you leave the appliance. When turning
off a burner, ensure the flame has gone out
before leaving the appliance.
IMPORTANT!
If you are having any difficulty lighting a hob
burner turn all the hob controls off and make
sure the burner parts have been replaced
correctly.
Hints and tips
• Do not overfill pans or they will boil over.
• Do not use pans with very heavy handles,
which cause the pan to tip.
• The hob surface should be allowed to cool
before closing the lid.
10
WARNING!
Place pans on the centre of the burners. Position pans so the handles cannot be accidentally
knocked or overhang the appliance. Lift pans
on and off the pan supports. Do not slide them
across the hob.
• Any spillage should be removed from the lid
before opening.
• Do not leave accidental spillage on the hob
or removable parts. The spillage should be
wiped up and the parts washed and carefully
dried as soon as the hob, pan supports and
burner parts are cool enough to touch.
• A flat-based Wok will stand stable on the pan
supports. If you use a round Wok with a collar
support, the collar must be the open wirework type otherwise the performance of the
burner will be affected.
WARNING!
Take care to avoid burns and scalds when
reaching across the hotplate.
WARNING!
Take extra care when deep fat frying, do not
cover the pan with a lid. Do not leave a pan
unattended. If the pan catches fire, leave it
where it is and turn off all controls. Place a damp
cloth or a fitting lid over the pan to smother the
flames. Never put water on the fire. Leave to
cool for 30 minutes.
WARNING!
Do not use the lid as a work surface or chopping
board. This could damage the glass and reduce
it's strength.
WARNING!
Gas flame safety device (FSD) is used for cutting off the gas feed to the burners in case the
flames are accidentally put out by wind, overflowing liquids, etc. To activate this feature,
press the knob during ignition, and when the
ignition occurs, keep it pressed for 5 seconds,
but no longer than 10 seconds. When the flame
is accidentally put out, the device will cut out
the gas flow. To see if your appliance is equipped with FSD, please refer to “Model Recognition Table” on page 28.
WARNING!
For your safety, the glass hob lid is equipped
with a safety valve that will cut out the gas feed
to the hob burners in case the lid is lowered.
However, the oven and grill burners will
continue to operate regardless of the position
of the hob lid. This function must not be used
for controlling the burners. The gas will continue
to flow when the lid is lifted, and will not reignite
until manual intervention.
A
Gas hob off
Gas hob on
Shut off mechanism
11
The grill
CAUTION!
Accessible parts may be hot when the grill is in use.
Young children should be kept away.
IMPORTANT!
When you first operate the grill you may hear some
sounds as the burner heats up, this is quite normal and
is not a fault on the appliance.
Using the grill
Fully open the door before lighting the grill.
Keep the control knob depressed for up to 5 seconds,
but no longer than 10 seconds. After this time release
the controls. The flame should remain alight. If after 10
seconds the burner is not lit, stop operating the appliances and wait at least 1 minute before attempting a
further ignition of the burner.
Push in and hold the con- Press the ignition button
trol knob, turn to the large immediately.
flame symbol (highest setting).
WARNING!
The grill door must be left open when grilling.
When the burner has lit release the control and ignition
button, adjust the setting as required.
12
To turn off the grill
The grill pan and handle
WARNING!
Always use an oven glove to protect your hand
when using the grill as all the metal parts can
become very hot!
Turn the control knob to the off position shown by
a dot.
WARNING!
Never cover the grill pan or grid with foil as this
can lead to grill fires.
The grill pan has a detachable handle. Ensure
to locate the tip of grill pan handle inside the
recessed form as indicated in the figure below.
Do not leave the handle in position when grilling. If the handle is left in position when grilling,
it will get very hot.
WARNING!
Ensure that the grill is turned off before closing
the door.
1
2
The grill pan
The grill pan handle
WARNING!
Ensure the handle is properly located.
WARNING!
Protect your hands when removing the grill pan
handle. Always remove the grill pan handle
during grilling. Place the grill pan on the shelf
so that the pan is positioned centrally beneath
the grill.
Hints and tips
• Most foods should be placed on the grid in
the grill pan to allow maximum circulation of
air to lift the food out of the fats and juices.
• Adjust the grid and grill pan runner position
to allow for different thicknesses of food.
13
• Food should be thoroughly dried before grilling to minimise splashing. Brush lean meats
and fish lightly with a little oil or melted butter
to keep them moist during cooking.
• Accompaniments such as tomatoes and
mushrooms may be placed underneath the
grid when grilling meats.
• When toasting bread use the shelf in position
1 with the grid in the high position.
• Preheat the grill on a full setting for a few
minutes before sealing steaks or toasting.
Adjust the heat setting and the shelf as
necessary during cooking.
• The food should be turned over during cooking as required.
Grilling chart
FOOD
GRILL TIME (mins in total)
Bacon Rashers
0:10 - 0:15
Beef Burgers
0:15 - 0:20
Chicken Joints
0:40 - 0:50
Lamb Chops
0:20 - 0:30
Pork Chops
0:20 - 0:30
Whole Trout/Mackerel
0:20 - 0:30
Plaice/Cod Fillets
0:15 - 0:25
Kebabs
0:20 - 0:30
Kidneys - Lamb/Pig
0:15 - 0:20
Liver - Lamb/Pig
0:15 - 0:30
Sausages
0:20 - 0:30
Steak - Rare
0:06 - 0:12
Steak - Medium
0:12 - 0:16
Steak - Well Done
0:14 - 0:20
Toasted Sandwiches
0:05 - 0:10
IMPORTANT!
The times quoted above are given as a guide
and should be adjusted to suit personal taste.
14
The top oven
The top oven is the smaller of the two ovens. It
is designed for cooking smaller quantities of
food. The top oven is also ideal for use as
warming compartment to warm dishes and
keep food hot. Use the top oven when you want
to warm plates. Use the lowest setting on the
top oven temperature control.
Using the top oven
Press the ignition button
immediately. Keep the
control knob depressed
for up to 5 seconds, but no
longer than 10 seconds.
S
3
4
0
5 6
78
Fully open the door before
lighting the top oven. Push
in and hold the control
knob, turn to gas mark 8.
12
78
0
6
S
After this time release the controls. The flame should
remain alight. If after 10 seconds the burner has not lit,
stop operating the appliance and wait at least 1 minute
before attempting a further ignition of the burner. When
the burner has lit release the control and ignition button,
adjust the setting as required.
12 34
5
Preheating
When you need to preheat the oven, we recommend you do so for 20 minutes. For recipes
needing high temperatures, e.g. bread, pastries, scones, soufflés etc., best results are
achieved if the oven is preheated first. For best
results when cooking frozen or cooked chilled
ready meals always preheat the oven first.
WARNING!
Do not place dishes, tins and trays directly on
the oven base as it becomes very hot and damage will occur.
15
To fit the top oven shelf
To turn the top oven off
0
S
12
3
4
5 6
78
Turn the control knob to the off position. This is
shown by a dot.
Hints and tips
• Arrange the shelves in the required positions
before switching the oven on. Shelf positions
are counted from the bottom upwards.
• Ensure that food is placed centrally on the
shelf and there is sufficient room around the
baking tray/dish to allow for maximum circulation.
• Do not push dishes too far back as food will
burn if it overhangs the burner flame.
16
• Stand dishes on a suitably sized baking tray
on the shelf to prevent spillage onto the oven
base and to help reduce cleaning.
• The material and finish of the baking tray and
dishes used affect base browning. Enamelware, dark, heavy or non-stick utensils increase base browning. Shiny aluminium or
polished steel trays reflect the heat away and
give less base browning.
• Do not place baking trays directly on the
oven base as it interferes with the oven air
circulation and can lead to base burning; use
the lower shelf position.
• For economy leave the door open for the
shortest possible time, particularly when
placing food into a pre-heated oven.
WARNING!
Do not place cookware and cooking pots with
rough bases e.g. cast iron on the oven door as
damage to the glass may occur.
The main oven
Heat zones
There are zones of heat within the oven. The
temperature in the middle is the gas mark you
have chosen. The top of the oven is slightly
hotter and the lower shelf slightly cooler. The
base of the oven is quite a lot cooler. You can
make use of these heat zones when you are
cooking foods requiring different temperatures
all at the same time. If you are cooking more
than one tray of similar items, for example
cakes or biscuits, swap the trays during cooking
or you can remove the top tray when the food
is cooked and move the lower tray to the higher
shelf to finish cooking.
Push in and hold the control knob, turn to gas mark
9.
Preheating
When you need to preheat the oven, we recommend you do so for 20 minutes. For recipes
needing high temperatures, e.g. bread, pastries, scones, soufflés etc., best results are
achieved if the oven is preheated first. For best
results when cooking frozen or cooked chilled
ready meals always preheat the oven first.
Using the main oven
Fully open the door before lighting the main
oven.
Press the ignition button immediately. Keep the control
knob depressed for up to 5 seconds, but no longer than
10 seconds. After this time release the controls. The
flame should remain alight. If after 10 seconds the
burner has not lit, stop operating the appliance and wait
at least 1 minute before attempting a further ignition of
the burner. When the burner has lit release the control
and ignition button, adjust the setting as required.
To turn the main oven off
Turn the control knob to the off position. This is shown
by a dot.
17
Slow Cook Function
S
The food needs to be cooked at Gas mark 6 for 30 minutes before the oven is turned
down to "Slow Cook". This ensures that the central temperature of the food gets
hot enough to start the food cooking.
Main Oven
s
1
23 4 5
6
78
Hints and tips
• Arrange the shelves in the required positions
before switching the oven on. Shelf positions
are numbered from bottom upwards.
6
5
4
3
2
1
• Ensure that food is placed centrally on the
shelf and there is sufficient room around the
baking tray/dish to allow for maximum circulation.
• Do not push dishes too far back as food will
burn if it overhangs the burner flame.
18
• Stand dishes on a suitably sized baking tray
on the shelf to prevent spillage onto the oven
base and to help reduce cleaning.
• The material and finish of the baking tray and
dishes used affect base browning. Enamelware, dark, heavy or non-stick utensils increase base browning. Shiny aluminium or
polished steel trays reflect the heat away and
give less base browning.
• When cooking more than one dish in the
oven, place dishes centrally on different
shelves rather than cluster several dishes on
one shelf, this will allow the heat to circulate
freely for the best cooking results.
• If you are cooking more than one tray of
similar items, for example cakes or biscuits,
swap the trays during cooking or you can
remove the top tray when the food is cooked
and move the lower tray to the higher shelf
to finish cooking.
• Do not place baking trays directly on the
oven base as it interferes with the oven air
circulation and can lead to base burning; use
the lower shelf position.
WARNING!
Do not place cookware and cooking pots with
rough bases e.g. cast iron on the oven door as
damage to the glass may occur.
Cooking tables
erence and requirements. For best results,
moist recipes (for example pizza, fruit flans etc.)
should be baked on one level. To ensure optimal performance when cooking convenience
foods, pizza or frozen and chilled ready meal,
always preheat the oven first.
Oven cooking chart
The temperature and baking times are for guidance only, as these will depend on the
consistency of the various ingredients and the
number, type and size of baking tray or tins
used. It may be necessary to increase or decrease the temperature to suit individual prefMain oven
Food
Gas mark
Top oven
Pos.
Gas mark
Pos.
Approximate
cook time (h)
Biscuits
5
3+5
5
2
0:15 - 0:25
Bread
81)
4
-
-
0:30 - 0:45
Bread rolls/buns 81)
4
-
-
0:15 - 0:30
Small / Queen
Cakes
5
6+4
5
2
0:20 - 0:30
Sponges
4
3+5
4
2
0:25 - 0:35
Victoria Sandwich
4
3+5
4
2
0:25 - 0:35
Madeira Cake
4
4
-
-
1:15 - 1:45
Rich Fruit Cake
2
3
-
-
2:30 - 3:00
Christmas Cake 2
3
-
-
4:00 - 5:15
Gingerbread
2
3
2
1
1:15 - 1:45
Meringues
1
3
1
1
2:30 - 3:15
Flapjack
5
3
5
1
0:30 - 0:35
Shortbread
3
3
3
1
0:45 - 1:00
Fruit Pies,
Crumbles
6
3
6
1
0:45 - 1:00
Milk Puddings
2
3
2
1
1:30 - 2:15
Scones
7
3+5
7
1
0:08 - 0:18
Choux Pastry
6
4
6
2
0:35 - 0:45
19
Main oven
Food
Gas mark
Top oven
Pos.
Gas mark
Pos.
Approximate
cook time (h)
Éclairs / Profiter5
oles
4
5
2
0:25 - 0:35
Flaky Pastry
6
4
6
2
0:25 - 0:45
Mince Pies
5
3+5
5
1
0:15 - 0:30
Pasta Lasagne
etc.
5
3
5
1
0:45 - 1:00
Meat Pies
7
4
7
1
0:40 - 0:50
Quiche, Tarts,
Flans
5
4
5
1
0:35 - 0:45
Shepherd’s Pie
7
3
7
1
0:30 - 0:55
Soufflés
5
3
5
1
0:20 - 0:40
Fish
4
4
4
1
0:20 - 0:40
Fish Pie
6
3
6
1
0:30 - 0:40
Beef Casserole
3
2
3
1
2:30 - 3:15
Lamb Casserole 3
2
3
1
2:30 - 3:15
Convenience
Foods
Follow manufacturer’s instructions
Baked Potatoes 5
4
5
1
1:30 - 2:15
Roast Potatoes
6
4
6
1
1:00 - 1:45
Large Yorkshire
Puddings
7
5
7
1
0:35 - 0:45
Individual Yorkshire Puddings
7
5
7
1
0:15 - 0:30
1) When baking bread cook for 10 minutes at gas mark 8 then reduce to mark 6 for the remaining cook time.
IMPORTANT!
Shelf positions are counted from the bottom of
the oven.
20
IMPORTANT!
To help pastry dishes brown on the underside
cook on a metal plate or place on a baking tray.
Roasting chart
Meat
Beef/ Beef boned
Mutton/Lamb
Pork/Veal/Ham
Chicken
Gas mark
5
0:20 - 0:35 minutes per ½kg (1lb)
and 0:20 - 0:35 minutes over.
5
0:25 - 0:35 minutes per ½kg (1lb)
and 0:25 - 0:35 minutes over.
5
0:30 - 0:40 minutes per ½kg (1lb)
and 0:30 - 0:40 minutes over.
5
0:20 - 0:25 minutes per ½kg (1lb)
and 0:20 minutes over.
5
0:20 - 0:25 minutes per ½kg (1lb)
up to 3½kg (7lb) then 0:10 minutes
per ½kg (1lb) over 3½kg (7lb).
5
0:25 - 0:35 minutes per ½kg (1lb)
and 0:25 - 0:30 minutes over.
5
0:35 - 0:40 minutes per ½kg (1lb)
and 0:35 - 0:40 minutes over.
5
0:20 minutes per ½kg (1lb) and
0:20 minutes over.
Turkey/Goose
Duck
Pheasant
Rabbit
Cooking time
INTERNAL TEMPERATURES –
Rare: 50-60°C; Medium: 60-70°C; Well done:
70-80°C
The roasting temperatures and times given in
the chart should be adequate for most joints,
but slight adjustments may be required to allow
for personal requirements and the shape and
texture of the meat. However, lower temperatures and longer cooking times are recommended for less tender cuts, or larger joints.
Wrap joints in foil if preferred, for extra browning
uncover for the last 0:20 – 0:30 min. cooking
time.
Care and cleaning
WARNING!
Before cleaning always allow the appliance to
cool down.
Cleaning materials
• Before using any cleaning materials on your
appliance, check that they are suitable and
that their use is recommended by the
manufacturer.
21
• Cleaners that contain bleach should not be
used as they may dull the surface finishes.
Harsh abrasives and scourers should also
be avoided.
Cleaning the outside of the
appliance
• Do not use abrasive cleaning materials e.g.
abrasive cream cleaners, wire wool pads or
scourers on painted or printed finishes as
damage may occur. Regularly wipe over the
control panel, control knobs, handles, doors
and appliance sides using a soft cloth and
hot soapy water. To prevent streaking, finish
with a soft cloth.
• Stainless Steel cream cleaners are abrasive
and should be avoided as they may dull the
surface finish. Any spillage on the stainless steel finish must be wiped off
immediately.
WARNING!
Do not attempt to remove any of the control
knobs from the appliance as this may cause
damage and is a safety hazard.
Cleaning the hob
• Clean the hob using a mild abrasive.
• Take care not to damage the spark electrodes. If the spark electrodes are damaged the
burners will not light. You can remove the
pan supports, burner caps and burner
crowns to clean them. Again take care not
to damage the spark electrodes.
• Clean the burner crowns and pan supports
by soaking them in very hot soapy water.
22
• Aluminium based saucepans can leave
shiny metal marks on the pan supports. You
can remove any stubborn stains by scouring
with a soap impregnated steel wool pad. If
you look after the burner crowns and pan
supports in this way they will stay reasonably
clean. However the surface will dull with
time. After cleaning the appliance parts, dry
them thoroughly before you put them back.
When replacing hob burner parts
1. Crown to body. (Do not try to force the
crown on to the body). Make sure that the
hole in the crown is over the electrode.
Check that the location pegs sit in the slots
in the body. When the crown is in this position let it fall freely on to the body. Check
that the crown can be moved slightly from
side to side.
2. Cap to crown. Place cap centrally on the
top of crown (enamel side up). Move sideways and front to back to check the cap is
properly fitted.
3. Check for ignition. If a burner will not light
then you need to check the crown and cap
positions.
Cleaning the grill
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Pan Support
Cap
Hole
Crown
Location peg
Electrode
Slots
Body
Cleaning the grill/oven
furniture
• All removable parts, except the grill pan handle can be washed in the dishwasher.
• The grill pan, grill pan grid and oven shelves
may be cleaned using a soap impregnated
steel wool pad. Soaking first in hot soapy
water will make cleaning easier.
Do not clean the grill burner itself. Cleaning the
grill may cause the holes in the burner to become blocked preventing it from operating
correctly. Due to the nature of stainless steel
the grill burner may tarnish through use over a
period of time. This is quite normal and is not a
fault on the appliance. Clean the area around
the grill frequently using hot soapy water.
Cleaning inside the grill and oven
compartments
• The vitreous enamel main oven and grill
compartment can be cleaned using normal
oven cleaners with care. Ensure that the
manufacturers instructions are followed and
that all parts are well rinsed afterwards.
WARNING!
Aerosol cleaners must not come into contact
with elements, the door seal, or any painted
finishes as this may cause damage.
Cleaning the door(s)
WARNING!
To prevent damaging or weakening the door
glass panels avoid the use of the following:
• Household detergents and bleaches.
• Soap impregnated pads unsuitable for nonstick saucepans.
• Abrasive cleaning pads, scourers and steel
wool pads.
• Chemical oven pads or aerosols.
• Rust removers.
• Bath/Sink stain removers.
23
Cleaning between the outer and
inner door glass
IMPORTANT!
Please note that the door glass on your product
may differ in type and shape from that shown
in the diagrams.
To remove the inner door glass
2
1
4
3
If the oven door is the triple glass oven door, the third
glass can also be pulled out the same way as second
glass.
2
B
Before cleaning the oven door glasses, you must pull
out the inner glass as shown:
• Push the glass towards direction 1 and release from
the location bracket.
• Pull out the glass towards direction 2.
After cleaning:
• Push the glass towards under the cover (towards
direction 3).
• Place the glass under the location bracket (towards
direction 4).
1
After cleaning:
• Push the glass towards under the location bracket
“A”.
• Place the glass under location bracket “B”.
A
To clean the glass door panels
Clean the outer and inner glass using hot soapy
water or hob cleaner may be used. Do not use
24
hob cleaner on the Stainless Steel or painted
finishes.
WARNING!
If the door glass panel becomes chipped or has
deep scratches the glass will be weakened and
must be replaced to prevent the possibility of
the panel shattering. Please contact your local
service force centre who will be pleased to advise further.
WARNING!
Do not attempt to use the oven without the glass
being in place.
What to do if...
Maintenance must only be carried out by a
competent/qualified person. Do not try to alter/
modify the appliance yourself, as this could be
dangerous.
We recommend that your appliance has an
annual gas safety check carried out by our approved service agent. Please carry out the
following checks on your appliance before calling a Service Engineer. It may be that the
Problem
problem is a simple one that you can solve
yourself without the expense of a service call.
In-guarantee customers should make sure
that the checks have been made as the engineer will make a charge if the fault is not
a mechanical or electrical breakdown.
Please note that proof of purchase is required
for in-guarantee service calls.
Possible solution
The grill and oven do not work.
• Check that there is not a problem with your gas
supply.
You can do this by making sure the other gas appliances such as central heating or gas fires are
working.
• The battery may need replacing
• If you have checked the above: Allow the appliance
to cool for a couple of hours. The appliance should
now be working normally.
The oven is not cooking evenly.
• Check that the appliance is correctly installed and
is level.
• Check that the recommended temperatures and
shelf positions are being used.
The oven temperature is too high or too low.
• Check that the recommended temperatures and
shelf positions are being used. Be prepared to adjust the temperature up or down slightly to achieve
the results you want.
25
Problem
Possible solution
The hob burners will not light.
• Ensure the burner parts have been placed correctly.
• The battery may need replacing.
• Check that there is not a problem with your gas
supply. You can do this by making sure the other
gas appliances such as central heating or gas fires
are working.
The flame colour is orange/yellow.
• Due to the design of the burner the flame can appear
to be orange/yellow (flame disturbance) in certain
areas of the burner this is a natural occurrence.
The burner is not igniting or only partially lighting.
• Check that the burner is dry and that food spillage
or cleaning fluids are not present on the burner. This
can be dried with a cloth and stubborn marks
cleaned away with a dry nylon brush (old toothbrush
etc.)
The burner sounds noisy.
• It is natural for the burners to emit noise as the gas
is being drawn through the burner and may reduce
as they heat up.
The burner is emitting a popping sound.
• This is a natural occurrence when the burner is
alight and does not affect the performance of the
burner.
Noise
• It is normal for some metal parts on the cooker to
produce noise when in use, this is due to expansion
and contraction when heating up and cooling down.
Technical Data
Dimensions
Height:
900mm (nominal)
Width:
500mm (nominal)
Depth:
600mm (nominal)
Weight:
47.3Kg
Space for fixing at hob level
2mm minimum clearance
Space for fixing above hob level
See important note location of appliance
26
Minimum space above hob level
787mm (If a cooker hood is fitted refer to the cookerhood installation instructions)
Connections
Gas connection
Rear left hand side of appliance at hob level. Rc ½" ( ½
" B.S.P. female)
Electrical connection
None
Ignition
Battery 1.5 Volt AA size
LPG
GB: I3+
IE: I3+
GAS CONSUMPTION TABLE
NG
GB: I2H
LARGE BURNER
INJECTOR
85
115
NOMINAL RATING (KW)
3
3
CONSUMPTION IN 1h
218.3 gr/h
285.7 lt/h
INJECTOR
65
97
NOMINAL RATING (KW)
1.75
1.75
CONSUMPTION IN 1h
127.25 gr/h
166.7 lt/h
INJECTOR
50
72
NOMINAL RATING (KW)
1
1
CONSUMPTION IN 1h
72.7 gr/h
95.3 lt/h
INJECTOR
98
115
NOMINAL RATING (KW)
2.4
2.4
CONSUMPTION IN 1h
174.5 gr/h
228.6 lt/h
INJECTOR
98
115
NOMINAL RATING (KW)
2.4
2.4
CONSUMPTION IN 1h
174.5 gr/h
228.6 lt/h
68
110
MEDIUM BURNER
SMALL BURNER
MAIN OVEN BURNER
TOP OVEN BURNER
GRILL BURNER
INJECTOR
27
LPG
GB: I3+
IE: I3+
GAS CONSUMPTION TABLE
NG
GB: I2H
NOMINAL RATING (KW)
2.2
2.2
CONSUMPTION IN 1h
160 gr/h
209.5 lt/h
This appliance complies with: European Council Directives Low voltage Directive 73/23/EEC,
Gas Directive 90/396/EEC EMC Directive
89/336/EEC, CE Marking Directive 93/68/EEC.
Installation
MODEL RECOGNITION TABLE
MODEL NAME
GAS TYPE1)
COLOR
HOB FSD2)
ZKG5030WN1
WHITE
NG
NO 3)
ZKG5030SN1
SILVER
NG
NO3)
ZKG5030XN1
STAINLESS STEEL
NG
NO3)
ZKG5030KL1
BLACK
LPG
YES
1) For more information, refer to Technical Data on page 26.
2) For more information, refer to FSD warning clause on page 11.
3) This appliance is not suitable for installation in flats or other multi occupancy dwellings as defined in clause 8.2.1 of IGE/G/
5.
Safety requirements
• Natural Gas / LPG versions of this appliance
are available.
• Check that this model is suitable for the type
of supply available. This appliance must be
installed and/or serviced by a competent
person in accordance with the Gas Safety
(Installation and Use) Regulations Current
Editions and the I.E.E. Wiring Regulations.
• Detailed recommendations are contained in
the following British Standard Codes of Practice - BS.6172, BS.5440: Part 2 and B.S.
28
6891. All British Standards must be 'Current
Editions'.
• For appliances installed in the Republic of
Ireland please refer to NSAI – Domestic Gas
Installation IS813 Current Editions and the
ETCI Rules for Electrical Installations. In the
Republic of Ireland a signed Declaration of
Conformity is issued by the installer (IS813
Current Editions Annex D.1).
WARNING!
This appliance must be installed by a qualified
electrician / competent person (CORGI Registered). Safety may be impaired if installation is
not carried out in accordance with these instructions. Do not alter the electrical circuitry of
this appliance.
Provision for ventilation
• This appliance is not connected to a combustion products evacuation device. It
should be installed and connected in accordance with the current installation regulations. Particular attention should be given
to the relevant requirements regarding ventilation.
• The room containing the appliance should
have an air supply in accordance with BS.
5440: Part 2 Current Edition. All rooms require an openable window or equivalent and
some rooms will require a permanent vent
as well. For room volumes up to 5m³ an air
vent of 100cm² is required: for room volumes
between 5m³ and 10m³ an air vent of 50cm²
is required. . If the room has a door that
opens directly to the outside, no air vent is
required. For room volumes that exceed
11m³ no air vent is required. If there are other
fuel burning appliances in the same room,
BS.5440: Part 2 Current Edition should be
consulted to determine the requisite air vent
requirements.
• Prolonged intensive use of the appliance
may call for additional ventilation, for example opening a window, or more effective
ventilation, for example increasing the level
of mechanical ventilation where present.
Moving your appliance
• You may damage some soft or badly fitted
floor coverings when you move the appliance. The floor covering under the appliance
should be securely fixed so it does not ruck
up when you move the appliance across it.
Alternatively you could remove the floor covering. This appliance is heavy and care must
be taken when moving it. Do not try to move
the appliance by pulling the door handles.
• To move the appliance, open the grill door.
Raise the appliance off its front feet by lifting
it from inside the oven. Pull the appliance
forward. When you replace the appliance
push it back to the stop and make sure there
is the same gap at each rear corner.
For your safety
• Do not try to disconnect the appliance from
the gas supply if the supply pipe does not
have a bayonet connection, as described in
the installation instructions. If this is the case
contact the person who installed the appliance.
Location of appliance
• This appliance must not be installed in a bedsitting room of volume less than 20m³ or in
a bathroom, shower room or garage. It is
essential that the appliance is positioned as
shown.
29
750
max 400
• Curtains must not be fitted immediately behind the appliance or within 150mm of the
sides of the hotplate. If fitted next to or between two base units a minimum space of
1mm must be left between each unit and the
sides of the appliance. The hob must be set
to a minimum of 7mm above the adjacent
units. (Note: The levelling feet fitted to the
appliance will achieve a nominal height of
907mm -5+ 13mm. Base units not meeting
the above conditions must be a minimum of
100mm away from the hob.
Levelling the appliance
• Adjustment to suit floor conditions or height
is obtained by rotating clockwise or anti
clockwise the feet at the front and rear of the
appliance. A spirit level should be placed on
one of the shelves to confirm the appliance
is correctly levelled.
Connecting to gas supply
• This appliance is designed to be installed
with an appliance flexible connection only.
• Supply piping should not be less than R3/8.
Connection is made to the Rc ½ (½" B.S.P)
female threaded entry pipe located just below the hob level on the rear left hand side
of the appliance.
min 150
min 7
min 1
• For appliances installed in the Republic of
Ireland please refer to NSAI-Domestic Gas
Installation IS813 Current Edition Section7
Permitted Locations of appliance Table4--Locations and Permanent Ventilation requirements-flueless appliances. Note: L.P.G. cookers MUST NOT be installed
below ground level i.e. in a basement or
aboard any boat, yacht or other vessel.
30
IMPORTANT!
Only liquid sealants to be used when inlet gas
pipe is fitted i.e.: do not use P.T.F.E. sealant
tape.
• Carry out a gas tightness test after connecting to the gas supply.
• The gas bayonet connector must be fitted in
the enlarged area indicated.
• Take into account that it must be possible to
pull the appliance forward sufficiently. Ensure the hose does not become trapped
when pushing the appliance into position.
IMPORTANT!
Flexible tubing used must comply with BS.
669 current edition.
LPG Flexible connections must be a type
suitable for L.P.G and capable of operation
up to 50 mbar and carry a red stripe, band
or label.
Fixing the stability chain
To further prevent tilting and for safe usage of
the appliance a stability chain should be used.
Unscrew the screw shown in the figure. Then,
align the first loop of the chain with the hole and
assemble with the screw so that the chain
stands in its place safely. Check the assembly
by gently pulling the chain from its loose end.
Fix the loose end to the rear wall as appropriate
for your kitchen. The chain is not supplied within
the package of the appliance, but can easily be
supplied from the market.
The battery
WARNING!
After unpacking, install the battery in the battery
box as explained below. The battery is placed
in the document bag.
1. The battery is located on the left hand side
of the front plinth.
2. To gain access to the battery, open the
main oven door and lift up the battery
holder lid.
3. Fit the new battery ensuring (+) terminal is
next to the (+) sign on the battery.
4. Close the lid of the battery holder.
Pressure testing
1. The Rapid injector is used as a pressure
test point.
2. Connect the pressure gauge to the Rapid
injector.
31
3. Check the supply pressure by turning the
Rapid burner on and one other hob burner
full on and light the appropriate burner.
The pressure should be either:
– For Natural Gas 20mbar
– For LP. Gas. The pressure must be set
to 29 mbar for use on butane or 37 mbar
for use on propane.
4. Turn off the taps, disconnect the pressure
gauge.
5. Check operation of each hob burner.
Checking the grill
• Place the grill pan containing the grid, with
the handle attached, into the grill compartment. To light the grill burner push in and
hold the control knob, turn to the large flame
symbol (highest setting). Press the ignition
button immediately. Keep the control knob
depressed for up to 5 seconds, but no longer
than 10 seconds. After this time release the
controls. The flame should remain alight. If
after 10 seconds the burner has not lit, stop
operating the appliance and wait at least 1
minute before attempting a further ignition of
the burner. When the burner has lit release
the control and ignition button, adjust the
setting as required.
Checking the hob
• Lift the lid. Fit the burner crowns and caps
ensuring that they are correctly seated. Fit
the pan supports.
• To light the hob burner push in and hold the
control knob, turn to the large flame symbol
(highest setting). Press the ignition button
immediately. If the appliance is equipped
with, FSD you can also check the FSD system by the following procedure: keep the
32
control knob depressed for up to 5 seconds,
but no longer than 10 seconds. After this time
release the controls. The flame should remain alight. If after 10 seconds the burner
has not lit, stop operating the appliance and
wait at least 1 minute before attempting a
further ignition of the burner. When the
burner has lit release the control and ignition
button, adjust the setting as required. Turn
off the hob and wait 1 minute. Turn the hob
control knob to the large flame symbol (highest setting). DO NOT depress or attempt to
ignite the burner. No gas should flow.
Checking the main oven
1. To light the main oven burner push in and
hold the control knob, turn to gas mark 9
Press the ignition button immediately.
Keep the control knob depressed for up to
5 seconds, but no longer than 10 seconds.
After this time release the controls. The
flame should remain alight. If after 10 seconds the burner has not lit, stop operating
the appliance and wait at least 1 minute
before attempting a further ignition of the
burner. When the burner has lit release the
control and ignition button.
2. After 1 minute check that the flame covers
the full width of the burner and is stable.
3. Set the oven control to Mk 2, close the oven
door and check that after about 10 minutes
the flame size has reduced.
4. Turn off the control and check that the oven
flames go out.
Checking lid shut-off device
1. Lift the lid.
2. To light the hob burner push in and hold the
control knob, turn to the large flame symbol
(highest setting) Press the ignition button
immediately. Keep the control knob depressed for up to 5 seconds, but no longer
than 10 seconds. After this time release the
controls. The flame should remain alight. If
after 10 seconds the burner has not lit, stop
operating the appliance and wait at least 1
minute before attempting a further ignition
of the burner. When the burner has lit release the control and ignition button.
3. Close the lid. There should now be no gas
supply to the hotplate and the burner will
go out.
4. Turn off the hob and lift the lid. The gas
supply should now be restored to the hob,
when the control is turned on.
IMPORTANT!
Instruct the user on how to use the appliance
and its ignition system. Refer the user to the
wording inside this manual which gives advice
on the safe operation of the appliance.
Environmental Information
The symbol
on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local council, your
household waste disposal service or the shop
where you purchased the product.
After installation please dispose of the packaging with due regard for safety and the environment. Your local authority can arrange this.
Guarantee/Customer Service
GREAT BRITAIN & IRELAND
Standard guarantee conditions
We, Electrolux, undertake that if within 12
months of the date of the purchase this Electrolux appliance or any part thereof is proved to
be defective by reason only of faulty workmanship or materials, we will, at our option repair or
replace the same FREE OF CHARGE for labour, materials or carriage on condition that:
• The appliance has been correctly installed
and used only on the electricity supply stated
on the rating plate.
• The appliance has been used for normal domestic purposes only, and in accordance
with the manufacturer's instructions.
33
• The appliance has not been serviced, maintained, repaired, taken apart or tampered
with by any person not authorised by us.
• Electrolux Service Force Centre must undertake all service work under this guarantee
• Any appliance or defective part replaced
shall become the Company's property.
• This guarantee is in addition to your statutory
and other legal rights.
Exclusions
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts
of glass or plastic.
• Costs incurred for calls to put right an appliance which is improperly installed or calls to
appliances outside the United Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are
subject to rental agreements.
• Products of Electrolux manufacturer that are
not marketed by Electrolux
Service and Spare Parts
In the event of your appliance requiring service,
or if you wish to purchase spare parts, please
contact your local Service Force Centre by telephoning
0870 5 929 929
Your telephone call will be automatically routed
to the Service Force Centre covering your postcode area.
Tel:
Electrolux
08705 950 950 (*)
AEG-Electrolux
08705 350 350 (*)
Zanussi-Electrolux
08705 727 727 (*)
(*) Calls may be recorded for training purposes
34
For the address of your local Service Force
Centre and further information about Service
Force, please visit the website at
www.serviceforce.co.uk
Before calling out an engineer, please ensure
you have read the details under the heading
"What to do if..."
When you contact the Service Force Centre
you will need to give the following details:
1. Your name, address and postcode.
2. Your telephone number.
3. Clear concise details of the fault.
4. The model and Serial number of the appliance (found on the rating plate).
5. The purchase date.
Please note a valid purchase receipt or guarantee documentation is required for in guarantee service calls.
Customer Care
For general enquiries concerning your Electrolux appliance, or for further information on Electrolux products please contact our Customer
Care Department by letter or telephone at the
address below or visit our website at
www.electrolux.co.uk
Customer Care Department Electrolux Major
Appliances Addington Way Luton
Bedfordshire, LU4 9QQ
For Customer Service in The Republic of
Ireland please contact us at the address below:
Electrolux Group (Irl) Ltd Long Mile Road,
Dublin 12, Republic of Ireland Tel: +353 (0)1
4090751 Email: service.eid@electrolux.ie
35
www.electrolux.com
www.zanussi-electrolux.co.uk
892 930 003-A-04022008-01