Samsung S300W - SIR Satellite TV Receiver User`s guide

DirecTV Mnl MDTV6
3/21/03
2:04 PM
DIRECTV® Universal
Remote Control
User’s Guide
Page 1
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 2
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features And Functions . . . . . . . . . . . . . . . . . . . . . . 4
Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DIRECTV DVR and UltimateTV Key Charts. . . . . . . . . . 7
Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 8
About DIRECTV Control . . . . . . . . . . . . . . . . . . . . . . 9
Programming DIRECTV Control. . . . . . . . . . . . . . . . . . 9
Setup Codes for DIRECTV® Receivers. . . . . . . . . . . . 10
Setup Codes for DIRECTV DVRs . . . . . . . . . . . . . . . . 11
Programming Other Device Control. . . . . . . . . . . 11
Programming TV/VCR Combo Control . . . . . . . . 12
Manufacturer’s Codes. . . . . . . . . . . . . . . . . . . 14
Setup Codes for TVs. . . . . . . . . . . . . . . . . . . . . . . . . 14
Setup Codes for VCRs . . . . . . . . . . . . . . . . . . . . . . . 17
Setup Codes for TV/VCR Combos . . . . . . . . . . . . . . . 19
Setup Codes for Digital Video Recorders (DVRs) . . . . . 20
Setup Codes for DVD Players . . . . . . . . . . . . . . . . . . 20
Setup Codes for Stereo Receivers . . . . . . . . . . . . . . . 21
Setup Codes for Stereo Amplifiers . . . . . . . . . . . . . . 22
Searching For Your Code . . . . . . . . . . . . . . . . . . . . 23
Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . 24
Using The Master Power Key . . . . . . . . . . . . . . . . . 25
Re-Assigning Device Keys . . . . . . . . . . . . . . . . . . 26
Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . 27
To Change Volume Lock to the VCR Mode . . . . . . . . . 27
To Change Volume Lock to the SAT Mode . . . . . . . . . 27
To Change Volume Lock to the AUX Mode . . . . . . . . . 27
To Change Volume Lock Back to the TV Mode . . . . . . 28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Repair Or Replacement Policy . . . . . . . . . . . . . . . 30
Additional Information . . . . . . . . . . . . . . . . . . . . . . 31
2
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 3
INTRODUCTION
Congratulations! You now have an exclusive DIRECTV®
Universal Remote Control that will control four devices,
including a DIRECTV Receiver, TV,VCR, and an auxiliary
device. Moreover, its sophisticated technology allows you to
consolidate the clutter of your original remote controls into
one easy-to-use unit that’s packed with features such as:
• Preprogrammed interactive technology that links hot
keys to your DIRECTV® service
• Master Power key for master on/off control of all of
your equipment with a single keystroke (when Power
is held for 3 seconds)
• Macro keys for sorting movie and sports programs
in the DIRECTV® programming (on most
DIRECTV Receivers)
• ID Lock to lock your remote control for use only with a
selected DIRECTV Receiver
• Automatic back lighting of most commonly-used keys
that become active with any key press
• Code library for popular video and audio devices
• Code Search to help program control of older or
discontinued devices
Before using your DIRECTV Universal Remote Control,
you may need to program it to operate with your
particular home entertainment devices. Please follow the
instructions detailed in this User’s Guide to setup your
DIRECTV Universal Remote Control so you may start
enjoying its features.
3
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 4
FEATURES AND FUNCTIONS
Use the illustration below to locate feature keys on the
DIRECTV Universal Remote Control. The Key Charts on
the next three pages explain their functions.
4
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 5
Key Charts
Press TV, AUX, VCR, or SAT once to
select a home entertainment device
to control. Each key has a red
indicator light that blinks upon
selection and indicates the device
currently being controlled by your
DIRECTV® Universal Remote Control.
Press Power once to turn on or off
a home entertainment device.
Press and hold Master Power for
3 seconds to turn on or off all
home entertainment devices
(see Using The Master Power Key
on page 25).
Use Input/ANT to select available
inputs on the TV. For VCR or DVD
use, select Input/ANT to view the
TV or video.
Use Volume to raise (or lower) the
sound volume.
Press Mute once to turn the sound
off or on.
Use Info to display the current
channel and program information.
Press Menu/DIRECTV once to
display the main menu.
Use Guide to display the DIRECTV
program guide.
While watching TV, use CH ▲ (or
▼) to select the next higher (or
lower) channel.
While in the DIRECTV program
guide, use Page ▲ (or ▼) to page
up (or down) through available
channels in the program guide.
Use the cursor keys to move the
cursor in the program guide and
menu screens.
continued on next page..
5
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 6
FEATURES AND FUNCTIONS
Key Charts (continued)
Use Select/OK to choose highlighted
items in the menu screens and
in the program guide.
Use Exit (Clear) to exit menu
screens and the program guide.
Use (DIRECTV INTERACTIVE™)
to access interactive features (if available on your DIRECTV Receiver).
Use Favorite to view favorite channels that have been programmed.
Use Movies to sort the guide to
show programs that are movies (on
most DIRECTV® Receivers).
Use Sports to sort the guide for
available sports-related programs
(on most DIRECTV Receivers).
Use the keypad (0 ~ 9) to directly
tune a channel (e.g., 206).
Press Prev CH once to return to the
the last channel viewed.
Press Back once to page back one
page in the menu.
Press Alt Audio once to switch
between English and a foreign
language (e.g.,Spanish) if alternate
audio is avaialble.
Press Enter once to tune to a
channel on some TVs.
Use the transport keys to control
your VCR, DVR, or CD/DVD player.
To record a program, press Record
twice.
Use (–) to separate main and
sub-channel numbers (e.g., 2-1).
Press and hold Setup for 3 seconds
for all programming sequences.
6
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 7
DIRECTV® DVR and UltimateTV Key Charts
NOTE: On DIRECTV DVRs and DIRECTV Receivers with Tivo
or UltimateTV service, several remote control keys function
differently than those listed in the previous section. They are
described below:
For DIRECTV DVRs, press to
display program options
(DIRECTV Central).
For DIRECTV Receivers with
UltimateTV, press
to display the shows you have
recently recorded (Recent).
For DIRECTV DVRs, use Favorite
to switch from watching a recorded
show to live TV (Return To Live).
For DIRECTV Receivers with
UltimateTV, use Favorite to view a
list of shows you have recorded
(My Shows).
Use Info to display the current
channel and program information.
Press Info while in the program
guide to display additional guide
options.
Press Movies for “Thumbs Down.”
(Available only on DIRECTV
DVRs).
Press Sports for “Thumbs Up.”
(Available only on DIRECTV
DVRs).
Use these transport keys to control
the digital video recorder (DVR)
built into your DIRECTV DVR
or DIRECTV Receiver with
Ultimate TV.
Use (–) to separate main and
sub-channel numbers (e.g., 2-1).
Use Skip Back to replay a program
recorded by your digital
video recorder.
Use Skip Fwd to advance a program
a program recorded by your
digital video recorder.
7
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 8
INSTALLING BATTERIES
❶
❷
❷
❸
The DIRECTV® Universal Remote Control comes with
preinstalled batteries.To activate them,pull the tab out
of the battery case. To change the batteries, perform the
following steps:
NOTE: The DIRECTV Universal Remote Control will stop
operating when the batteries are fully drained. Replacing the
batteries will restore your DIRECTV Universal Remote Control
to its full functionality, complete with your favorite settings.
1.
On the back of the remote control, push the
latch (as shown), lift off the battery cover, and
remove the used batteries.
2.
Obtain two (2) new AA alkaline batteries.
Match their + and – marks to + and – marks
in the battery case, then insert them.
3.
Align the cover’s tabs with the case’s holes.
Press down on the cover until the latch locks.
4.
Test the remote control by pressing Power and
any device key (e.g.TV,VCR,AUX,or SAT).If the
batteries are inserted correctly,the selected
device key will blink once.
8
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 9
ABOUT DIRECTV CONTROL
The DIRECTV® Universal Remote Control is designed to
give you access to features not found on the original remote
control.It is preprogrammed at the factory to operate a
HNS-manufactured DIRECTV Receiver, so you can skip
this section if you have this brand. However,to use it with
other brands of DIRECTV Receivers,you will need to program the remote control by performing the following steps:
Programming DIRECTV Control
1.
Locate the DIRECTV Receiver’s brand and
model number (on the back or bottom panel)
and write it in the spaces below.
Brand __________________________
Model # _________________________
NOTE: Please read steps 2-5 completely before proceeding. Highlight or write down the codes and device
you wish to program before moving on to step 2.
2.
Power on the DIRECTV Receiver.
3.
On the DIRECTV Universal Remote Control,
press SAT once. Press and hold Setup until
the SAT key blinks twice,then release Setup.
4.
Use the Setup Codes for DIRECTV Receivers or
DVRs (on the next two pages) to locate the
brand name and code for your specific
DIRECTV receiver. Then use the keypad to
enter the four-digit code. If performed correctly,
the SAT key will blink twice.
NOTE: If the SAT key emits a long blink, the code is
invalid. Repeat steps 3 and 4 and try entering the
same code again.
5.
Aim the DIRECTV Universal Remote Control at
the DIRECTV Receiver and press Power once.
The DIRECTV Receiver should turn off. If it
does not, repeat steps 3 and 4, trying each
code for your brand until you find one that
works. If it still does not work, try Searching
For Your Code on page 23.
6.
For future reference, write down the working
satellite receiver code in the following box:
SAT Code:
continued on next page...
9
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 10
ABOUT DIRECTV CONTROL (continued)
Setup Codes for DIRECTV Receivers:
Hughes Network Systems (most models)
Hughes Network Systems models GAEB0, GAEB0A,
GCEB0, GCEB0A, HBH-SA, and HAH-SA
GE models GRD33G2A and GRD33G3A
GE model GRD122GW
Hitachi model HDS210R
Mitsubishi HD models SRHD400 and SRHD500
Panansonic models TZ-DBS01 and TZ-DRD100
Panasonic models TUIRD10 and TUIRD20
Philips models DSX5150R, DSX5250R/I,
DSX5350R, DSX5353R, DSX5353X, and DSX5375R
Philips models DSX5500 and DSX5400
Philips HD model DSHD800R
Proscan model PRD8630A
Proscan model PRD8650B
RCA models DRD102RW and DRD203RW
RCA models DRD301RA, DRD302RA, DRD303RA,
DRD403RA, and DRD703RA
RCA models DRD502RB, DRD503RB, DRD505RB,
DRD515RB, DRD523RB, and DRD705RB
RCA models DRD202RD, DRD221RD, DRD222RD,
DRD223RD, DRD225RD, DRD420RE, DRD440RE,
DRD460RE, DRD480RE, DRD430RG, DRD431RG,
DRD450RG, DRD451RG, DRD485RG, DRD486RG,
DRD430RGA, DRD450RGA, DRD485RGA, DRD435RH,
DRD455RH, and DRD486RH
RCA model DTC-100
Samsung model SIR-S60W
Samsung model TS-160
Samsung models SIR-S70, SIR-S75, SIR-S300W,
and SIR-S310W
Sony models SAT-A1 and SAT-B1
Sony models SAT-A2 and SAT-B2
Sony models SAT-A3, SAT B3, SAT-A4, and SAT-B4
Sony models SAT-A50, SAT-A55, SAT-B50, SAT-B55,
and SAT-HD100
Sony models SAT-A65, SAT-A65A, SAT-B65, and
SAT-B65A
Toshiba model DST-3000
Uniden model UDS100
Zenith model DTV1080
10
0749
1749
0566
0866
0819
0749
0247
0701
1076
0099
0749
0566
0766
0866
0566
0766
0392
0492
1109
1256
1309
0639
0739
0839
0939
1039
1749
0724
1856
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 11
Setup Codes for DIRECTV DVRs:
Hughes Net. Sys./TiVo
model GXCEBOT
Philips/TiVo
model DSR6000R
RCA UltimateTV
model DWD490RE
Sony/TiVo
model SAT-T60
Sony UltimateTV
model SAT-W60
1142 (program under DIRECTV mode)
1142 (program under DIRECTV mode)
1492 (program under DIRECTV mode)
1639 (program under DIRECTV mode)
1739 (program under DIRECTV mode)
PROGRAMMING OTHER DEVICE CONTROL
The DIRECTV® Universal Remote Control is also preprogrammed to operate an RCA TV, an RCA VCR, and a
Pioneer audio receiver. To control devices other than the
default brands, perform the following steps; otherwise
skip this section:
NOTE: To control a DVD/DVR player, program the VCR key.
For TV/VCR Combo control, skip this section and perform the
instructions on the next page.
1.
Turn on a device and, if applicable, insert a
video cassette or DVD.
NOTE: Please read steps 2 through 4 completely before
proceeding. Highlight or write down the codes and
device you wish to program before moving on to step 2.
2.
On the DIRECTV Universal Remote Control,
press the device key you wish to program once
(e.g., TV, VCR, or AUX). Press and hold Setup
until the selected device key blinks twice and
then release Setup.
3.
Use the Manufacturer’s Codes (starting on
page 14) to locate the four digit number
corresponding to the brand name of the device
you want to control. Enter the first four-digit
code for your device. If performed correctly, the
light under the select device key will blink twice.
NOTE: If the selected device key emits a long blink,
the code is invalid. Repeat steps 2 through 3 and try
entering the same code again.
continued on next page...
11
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 12
PROGRAMMING OTHER DEVICE CONTROL
(continued)
4.
Aim the DIRECTV Universal Remote Control at
the device and press Power once. The device
should turn off. If it does not, repeat steps 2
and 3, trying each code for your brand until
you find one that works. If it still does not
work, try Searching For Your Code on page 23.
NOTE: If the device does not have a Power key, press
the (Play) key.
5.
Repeat steps 1 through 4 for each device you
want the the DIRECTV Universal Remote
Control to control. For future reference, write
down each working device code in the boxes
on the next page:
TV Code:
VCR Code:
AUX Code:
PROGRAMMING TV/VCR COMBO CONTROL
If you own a TV/VCR Combo, perform the following
instructions to control this device:
1.
Turn on your TV/VCR Combo and insert a
video cassette.
2.
On the DIRECTV Universal Remote Control,
press VCR once. Press and hold Setup until the
VCR key blinks twice, then release Setup.
3.
Use the Setup Codes For TV/VCR Combos (on
page 19) to locate the brand name and then
enter the first four-digit code for your TV/VCR
Combo. If you perform this procedure correctly,
the VCR key will blink twice.
NOTE: If the VCR key did not blink twice after entering the code’s last digit, then repeat steps 2 through 3
and try entering the same code again.
12
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 13
4.
Aim the DIRECTV Universal Remote Control at
your TV/VCR Combo and press Power once.
The unit should turn off. If it does not respond,
repeat steps 2 and 3, trying each code listed for
your brand until you find one that works. If it
still does not work, try Searching For Your Code
on page 23.
5.
If you’ve located a TV/VCR setup code that
works your TV/VCR Combo and a separate TV
code is also listed,you’ll need to program this
code into the DIRECTV Universal Remote
Control to access volume control (see
Programming Other Device Control on page 11).
If there is no separate TV code listed, you will
need to perform the following steps to access
volume control:
a. Press and hold Setup until the VCR key
blinks twice, then release Setup.
b. Enter 9 - 9 - 3. The VCR key will blink twice.
c. Press VCR once. The VCR key will blink
twice.
6.
For future reference, write down each working
device code in the below boxes:
TV/VCR Code:
TV Code (if used):
13
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 14
MANUFACTURER’S CODES
Setup Codes for TVs:
AOC
Admiral
Aiko
Akai
Alaron
America Action
Anam
Audiovox
Baysonic
Belcor
Bell & Howell
Bradford
Brockwood
Broksonic
CXC
Candle
Carnivale
Carver
Celebrity
Cineral
Citizen
Concerto
Contec
Craig
Crosley
Crown
Curtis Mathes
Daewoo
Daytron
Denon
Dumont
Electroband
Emerson
Envision
Fisher
Fujitsu
Funai
Futuretech
GE
Gibralter
GoldStar
Gradiente
Grunpy
Hallmark
Harley Davidson
Harman/Kardon
Harvard
0019, 0030
0093, 0463
0092
0030
0179
0180
0180
0092, 0180, 0451, 0623
0180
0019
0016, 0154
0180
0019
0236, 0463
0180
0030, 0056
0030
0054
0000
0092, 0451
0030, 0056, 0060, 0092
0056
0180
0180
0054
0180
0016, 0030, 0047, 0051, 0054, 0056, 0060, 0093, 0145, 0154,
0166, 0451, 0747, 1147, 1347
0019, 0092, 0451, 0623, 0624
0019
0145
0017, 0019
0000
0019, 0154, 0178, 0179, 0180, 0236, 0463, 0623, 0624
0030
0154
0179, 0683
0171, 0179, 0180
0180
0021, 0047, 0051, 0093, 0178, 0451, 0747, 1147, 1347
0017, 0019, 0030
0019, 0030, 0056, 0178
0053, 0056
0179, 0180
0178
0179
0054
0180
14
DirecTV Mnl MDTV6
Hitachi
Infinity
Inteq
JBL
JCB
JVC
KEC
KTV
Kenwood
LG
LXI
Logik
Luxman
MGA
MTC
Magnavox
Majestic
Marantz
Matsushita
Megatron
Memorex
Midland
Minutz
Mitsubishi
Motorola
Multitech
NAD
NEC
NTC
Nikko
Onwa
Optimus
Optonica
Orion
Panasonic
Penney
Philco
Philips
Pilot
Pioneer
Portland
Prism
Proscan
Proton
Pulsar
Quasar
RCA
Radio Shack
Realistic
3/21/03
2:04 PM
Page 15
0016, 0056, 0145
0054
0017
0054
0000
0053
0180
0030, 0180
0019, 0030
0056
0047, 0054, 0154, 0156, 0178, 0747
0016
0056
0019, 0030, 0150, 0178
0019, 0030, 0056, 0060
0030, 0054, 0179, 1254
0016
0030, 0054
0250
0145, 0178
0016, 0056, 0150, 0154, 0178, 0179, 0250, 0463
0017, 0047, 0051, 0747
0021
0019, 0093, 0150, 0178
0093
0180
0156, 0166, 0178
0019, 0030, 0056
0092
0030, 0092, 0178
0180
0154, 0166, 0250
0093, 0165
0179, 0236, 0463
0051, 0250
0019, 0021, 0030, 0047, 0051, 0056, 0060, 0156, 0178, 0747,
1347
0019, 0030, 0054, 0145, 0463
0054
0019, 0030
0166, 0679
0019, 0092
0051
0047, 0747
0178
0017, 0019
0051, 0165, 0250
0019, 0047, 0051, 0090, 0093, 0679, 0747, 1047, 1147, 1247,
1347, 1447
0019, 0030, 0047, 0056, 0154, 0165, 0178, 0180, 0747
0019, 0030, 0056, 0154, 0165, 0178, 0180
continued on next page...
15
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 16
MANUFACTURER’S CODES
Setup Codes for TVs (continued):
Runco
SSS
Sampo
Samsung
Sansei
Sansui
Sanyo
Scimitsu
Scotch
Scott
Sears
Semivox
Semp
Sharp
Shogun
Signature
Sony
Soundesign
Squareview
Starlite
Supreme
Sylvania
Symphonic
TMK
TNCi
Tandy
Technics
Technol Ace
Techwood
Teknika
Telefunken
Toshiba
Vector Research
Victor
Vidikron
Vidtech
Wards
White Westinghouse
Yamaha
Zenith
0017, 0030
0019, 0180
0030
0019, 0030, 0056, 0060, 0178
0451
0463
0154
0019
0178
0019, 0178, 0179, 0180, 0236
0047, 0054, 0056, 0154, 0156, 0171, 0178, 0179, 0747
0180
0156
0093, 0165, 0688
0019
0016
0000
0178, 0179, 0180
0171
0180
0000
0030, 0054
0171
0056, 0178
0017
0093
0051, 0250
0179
0051, 0056
0016, 0019, 0054, 0056, 0060, 0092, 0150, 0179, 0180
0056
0060, 0154, 0156, 1256
0030
0053
0054
0019, 0178
0016, 0019, 0021, 0030, 0054, 0056, 0165, 0178, 0179
0463, 0623, 0624
0019, 0030
0016, 0017, 0092, 0463, 0624
16
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 17
Setup Codes for VCRs:
Admiral
Adventura
Aiko
Aiwa
America Action
American High
Asha
Audiovox
Beaumark
Bell & Howell
Broksonic
CCE
Calix
Canon
Carver
Cineral
Citizen
Colt
Craig
Curtis Mathes
Cybernex
Daewoo
Denon
Dynatech
Electrohome
Electrophonic
Emerex
Emerson
Fisher
Fuji
Funai
GE
Garrard
Go Video
GoldStar
Gradiente
HI-Q
Harley Davidson
Harman/Kardon
Harwood
Hitachi
Hughes Network Sys.
JVC
KEC
KLH
Kenwood
Kodak
0048, 0209
0000
0278
0000, 0037
0278
0035
0240
0037
0240
0104
0121, 0184, 0209, 0479
0072, 0278
0037
0035
0081
0278
0037, 0278
0072
0037, 0047, 0072, 0240, 0271
0035, 0060, 0162, 0760
0240
0045, 0278
0042
0000
0037
0037
0032
0000, 0037, 0043, 0121, 0184, 0209, 0278, 0479
0047, 0104
0035
0000
0035, 0048, 0060, 0240, 0760
0000
0432, 0526
0037, 0038
0000
0047
0000
0038, 0081
0072
0000, 0042
0042
0067
0037, 0278
0072
0038, 0067
0035, 0037
continued on next page...
17
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 18
MANUFACTURER’S CODES
Setup Codes for VCRs (continued):
LXI
Lloyd’s
Logik
MEI
MGA
MGN Technology
MTC
Magnasonic
Magnavox
Magnin
Marantz
Marta
Matsushita
Memorex
Minolta
Mitsubishi
Motorola
Multitech
NEC
Nikko
Noblex
Olympus
Optimus
Orion
Panasonic
Penney
Pentax
Philco
Philips
Pilot
Pioneer
Polk Audio
Profitronic
Proscan
Protec
Pulsar
Quasar
RCA
Radio Shack
Radix
Randex
Realistic
Runco
STS
Samsung
Sanky
Sansui
0037
0000
0072
0035
0043, 0240
0240
0000, 0240
0278
0000, 0035, 0039, 0081
0240
0035, 0081
0037
0035, 0162
0000, 0035, 0037, 0039, 0047, 0048, 0104, 0162, 0209, 0240,
0479, 1037, 1162, 1262
0042
0043, 0048, 0067
0035, 0048
0000, 0072
0038, 0067, 0104
0037
0240
0035
0037, 0048, 0104, 0162, 0432, 1048, 1062, 1162, 1262
0184, 0209, 0479
0035, 0162, 0225, 1062, 1162, 1262
0035, 0037, 0038, 0042, 0240
0042
0035, 0209, 0479
0035, 0081, 1081, 1181
0037
0067
0081
0240
0060, 0760
0072
0039
0035, 0162, 1162
0035, 0042, 0048, 0060, 0240, 0760
0000, 1037
0037
0037
0000, 0035, 0037, 0047, 0048, 0104
0039
0042
0045, 0240
0039, 0048
0000, 0067, 0209, 0271, 0479
18
DirecTV Mnl MDTV6
Sanyo
Scott
Sears
Semp
Sharp
Shintom
Shogun
Singer
Sony
Sylvania
Symphonic
TMK
Teac
Technics
Teknika
Thomas
Toshiba
Totevision
Unitech
Vector
Vector Research
Video Concepts
Videosonic
Wards
White Westinghouse
XR-1000
Yamaha
Zenith
3/21/03
2:04 PM
Page 19
0047, 0104, 0240
0043, 0045, 0121, 0184
0000, 0035, 0037, 0042, 0047, 0104
0045
0048
0072
0240
0072
0000, 0032, 0035, 1032
0000, 0035, 0043, 0081
0000
0240
0000
0035, 0162
0000, 0035, 0037
0000
0043, 0045
0037, 0240
0240
0045
0038
0045
0240
0000, 0035, 0042, 0047, 0048, 0060, 0072, 0081, 0240, 0760
0072, 0209, 0278
0000, 0035, 0072
0038
0000, 0039, 0209, 0479
Setup Codes for TV/VCR Combos:
American High
Brocksonic
Colt
Curtis Mathis
Daewoo
Emerson
Funai
GE
Hitachi
HQ
Lloyds
MGA
Magnavox
Magnin
Memorex
Mitsubishi
Orion
Panasonic
Penney
0035 (for TV use 0051)
0002, 0294,
0072
0035 (for TV use 0051)
0278
0002, 0294, 0479
0000
0035 (for TV use 0051), 0060 (for TV use 0047),
0048 (for TV use 0093), 0240
0035 (for TV use 0051), 0000
0000
0000
0240
0081 (for TV use 0054), 0035 (for TV use 0051), 0000
0240
0037, 0162 (for TV use 0250)
0048 (for TV use 0093)
0002, 0294, 0479
0035 (for TV use 0051), 0162 (for TV use 0250)
0035 (for TV use 0051), 0240, 0162 (for TV use 0250)
continued on next page...
19
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 20
MANUFACTURER’S CODES
Setup Codes for TV/VCR Combos (continued):
Quasar
RCA
Sansui
Sanyo
Sears
Sharp
Sony
Symphonic
Zenith
0035 (for TV use 0051), 0162 (for TV use 0250)
0060 (for TV use 0047), 0035 (for TV use 0051),
0048 (for TV use 0093)
0000, 0479
0240
0000, 0037
0048 (for TV use 0093)
0032 (for TV use 0000)
0000
0000
Setup Codes for Digital Video Recorders (DVRs):
Panasonic Replay
Replay
TiVo
0614, 0616 (program under VCR mode)
0614, 0616 (program under VCR mode)
0618 (program under VCR mode)
Setup Codes for DVD Players:
Apex
Denon
Fisher
GE
Harman/Kardon
Hitachi
Hiteker
JVC
Kenwood
Magnavox
Marantz
Mitsubishi
Onkyo
Optimus
Panasonic
Philips
Pioneer
Proscan
RCA
Samsung
Sharp
Sony
Technics
Theta Digital
Toshiba
Yamaha
Zenith
0672
0490, 0634
0670
0522
0582
0664
0672
0558, 0623
0534, 0682
0503, 0675
0539
0521
0503, 0627
0571
0490, 0632
0503, 0539
0525, 0571, 0632
0522
0522, 0571
0573
0630
0533
0490
0571
0503
0490, 0545
0503, 0591
20
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 21
Setup Codes for Stereo Receivers:
ADC
ADC
Aiwa
Capetronic
Carver
Curtis Mathes
Denon
Garrard
Harman/Kardon
JBL
JVC
Kenwood
Linn
MCS
Magnavox
Marantz
Onkyo
Optimus
Panasonic
Philips
Pioneer
Polk Audio
Proscan
Quasar
RCA
Sansui
Sharp
Sony
Soundesign
Sunfire
Teac
Technics
Thorens
Victor
Wards
Yamaha
0531
0531
0121, 0158, 0189, 0405, 1089, 1405
0531
0189, 1089, 1189
0080
0004, 1104, 1160
0463
0110, 0189
0110
0074
0027, 0186, 1027, 1313, 1569
0189
0039
0189, 0391, 0531, 1089, 1189
0039, 0189, 1089, 1189
0135
0080, 0186, 0531, 0670, 1023
0039, 0309, 1518
0189, 0391, 1089, 1189
0014, 0080, 0150, 0531, 0630, 1023
0189
1254
0039
0080, 0531, 1023, 1254
0189, 1089
0186
0158, 1058, 1158, 1258
0670
1313
0463
0039, 0309, 1308, 1309, 1518
1189
0074
0014, 0080, 0158, 0189
0176, 0186, 1176
continued on next page...
21
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 22
MANUFACTURER’S CODES (continued)
Setup Codes for Stereo Amplifiers:
Aiwa
Carver
Curtis Mathes
Denon
Harman/Kardon
JVC
Linn
Magnavox
Marantz
Optimus
Panasonic
Philips
Pioneer
Polk Audio
RCA
Sony
Technics
Victor
Wards
Yamaha
0406
0269
0300
0160
0892
0331
0269
0269
0269, 0892
0300
0308
0269, 0892
0013, 0300
0269, 0892
0300
0220, 0689
0308
0331
0013
0354
22
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 23
SEARCHING FOR YOUR CODE
If your TV,VCR, DIRECTV® Receiver, or auxiliary device
does not respond to the DIRECTV Universal Remote
Control after trying all of the codes listed for your brand,
or if your brand is not listed at all, try searching for
your code.
For example, to search for a code for your TV:
1.
Turn on your TV.
2.
On the DIRECTV Universal Remote Control,
press TV once. Then press and hold Setup until
the TV key blinks twice, then release Setup.
3.
Enter 9 - 9 - 1. The TV key will blink twice.
4.
Aim the remote control at the TV and slowly
alternate between pressing Power and TV.
Stop when the TV turns off.
NOTE: In the search mode, the DIRECTV Universal
Remote Control will send IR codes from its library to
the selected device, starting with the most popular
code first.
5.
Press Setup once to lock in the code.
6.
To search for the codes of your other devices,
repeat steps 1 through 5, but substitute the
appropriate key (i.e., VCR, AUX, or SAT) for the
device you are searching for.
23
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 24
CHECKING THE CODES
If you have set up the DIRECTV® Universal Remote
Control using the Searching For Your Code procedure (on
the previous page), you may need to find out which fourdigit code is operating your equipment. For example, to
find out which code is operating your TV:
1.
Turn on your TV.
2.
On the DIRECTV Universal Remote Control,
press TV once. Then press and hold Setup until
the TV key blinks twice, then release Setup.
3.
Enter 9 - 9 - 0.
4.
To view the code for the first digit, press 1 once.
Wait 3 seconds and count the number of LED
blinks (e.g., 3 blinks = 3) and write down
the number in the leftmost TV Code box on
page 12.
NOTE: If a code digit is “0”, the LED will not blink.
5.
Repeat step 4 three more times for remaining
digits. Use 2 for the second digit, 3 for the third
digit, and 4 for the fourth digit. Finish writing
down the code in the TV Code boxes (on
page 12).
6.
To check for other device codes, repeat steps 1 to
5, but substitute the appropriate key (i.e., VCR,
AUX, or SAT) for the device you are checking.
Write down the codes in the appropriate boxes
on pages 10 and 12.
24
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 25
USING THE MASTER POWER KEY
The DIRECTV® Universal Remote Control is equipped
with a unique feature that allows you to sequentially turn
on or off all of your home entertainment devices with a
single key press in the following way:
1.
Point the remote control at the devices.
2.
Press and hold Power for 3 seconds to activate
the Master Power feature.Thereafter,your
DIRECTV Universal Remote Control will
sequentially turn on or off all of your home
entertainment devices.
Depending on what mode is currently selected,
the DIRECTV Universal Remote Control will
send IR commands to the devices in this order:
Start Mode
Device On/Off
End Mode
SAT
TV,VCR,AUX
SAT
TV
VCR,AUX, SAT
SAT
VCR
AUX, SAT, TV
SAT
AUX
SAT, TV,VCR
SAT
For example, if TV is selected, pressing and
holding Power for 3 seconds will first turn on
(or off) the TV, then the VCR, then the auxiliary device, and finally the DIRECTV Receiver.
NOTE: The DIRECTV Universal Remote Control
always defaults to the SAT mode after all devices are
turned off. Therefore, the initial power-on settings
will always be SAT, TV, VCR, and AUX, with the remote
control returning to the SAT mode as long as no other
device key is pressed first.
25
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 26
RE-ASSIGNING DEVICE KEYS
The DIRECTV® Universal Remote Control can be set up
to control a second TV or VCR, or any combination of
up to four home entertainment devices. For example, to
have the DIRECTV Universal Remote Control a TV, a
DIRECTV Receiver, and two VCRs, you will need to
re-assign the unused AUX key to operate the second VCR
as follows:
1.
On the DIRECTV Universal Remote Control,
press AUX once. Then press and hold Setup
until the AUX key blinks twice, then release
Setup.
2.
Enter 9 - 9 - 2.
3.
Press VCR once, then press AUX once. The
AUX key will blink twice.
4.
The AUX key is now ready to be programmed
for your second VCR. See Programming Other
Device Control on page 11.
To re-assign other device keys, repeat steps 1 to 4 and
substitute the key sequence using the following chart:
To Re-Assign
Perform Key Sequence
VCR as 2nd TV key:
Setup - 9 - 9 - 2 - TV - VCR
VCR as 2nd AUX key: Setup - 9 - 9 - 2 - AUX - VCR
VCR as 2nd SAT key:
Setup - 9 - 9 - 2 - SAT - VCR
VCR back to VCR:
Setup - 9 - 9 - 2 - VCR - VCR
AUX as 2nd TV key:
Setup - 9 - 9 - 2 - TV - AUX
AUX as 2nd VCR key:
Setup - 9 - 9 - 2 - VCR - AUX
AUX as 2nd SAT key:
Setup - 9 - 9 - 2 - SAT - AUX
AUX back to AUX:
Setup - 9 - 9 - 2 - AUX - AUX
Upon completion of a re-assignment, the selected mode
key will blink twice to confirm your selection. Then, you’ll
need to program device control (see Programming Other
Device Control on page 11).
26
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 27
CHANGING VOLUME LOCK
The DIRECTV® Universal Remote Control is set to control
volume of a device through your TV while in the TV,VCR,
or SAT mode. However, in the AUX mode, you still have
separate control of of your auxilary device’s volume.
If your TV is not remote controllable, or if you would like
the volume to be controlled by a different device, you can
change the Volume Lock setting to control a volume
through a non-associated mode (e.g., through the VCR in
the TV mode).
To Change Volume Lock To The VCR Mode:
1.
On the DIRECTV Universal Remote Control,
press VCR once. Then press and hold Setup
until the VCR key blinks twice, then release
Setup.
2.
Enter 9 - 9 - 3.
3.
Press VCR once. It will blink twice.
4.
Now, whenever you press Volume or Mute,
volume will be controlled by your VCR.
To Change Volume Lock To The SAT Mode
(Selected Models Only) :
1.
On the DIRECTV Universal Remote Control,
press SAT once. Then press and hold
Setup until the SAT key blinks twice,then
release Setup.
2.
Enter 9 - 9 - 3.
3.
Press SAT once. It will blink twice.
4.
Now, whenever you press Volume or Mute,
volume will be controlled by your satellite
receiver.
To Change Volume Lock To The AUX Mode:
NOTE: Performing these steps will allow you to access the volume
control of your auxilary device in all modes.
1.
On the DIRECTV Universal Remote Control,
press AUX once. Then press and hold Setup
until the AUXkey blinks twice, then release
Setup.
continued on next page...
27
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 28
CHANGING VOLUME LOCK
To Change Volume Lock To The AUX Mode
(continued):
2.
Enter 9 - 9 - 3.
3.
Press AUX once. It will blink twice.
4.
Now, whenever you press Volume or Mute,
volume will be controlled by your auxilary
device.
To Change Volume Lock Back To The TV Mode:
1.
On the DIRECTV Universal Remote Control,
press TV once. Then press and hold Setup until
the TV key blinks twice, then release Setup.
2.
Enter 9 - 9 - 3.
3.
Press TV once. It will blink twice.
4.
Now, whenever you press Volume or Mute,
volume will again be controlled by your TV.
28
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 29
TROUBLESHOOTING
PROBLEM:
Mode key does not blink when you press a key.
SOLUTION: Replace the batteries with two (2) new AA
alkaline batteries (see page 8).
PROBLEM:
Mode key blinks when you press a key, but home
entertainment device does not respond.
SOLUTION: Make sure you are aiming the DIRECTV®
Universal Remote Control at your home
entertainment device and that you are within
15 feet of the device you are trying to control.
PROBLEM:
The DIRECTV Universal Remote Control does
not control home entertainment devices or
commands are not performing properly.
SOLUTION: Try all listed codes for the device brand being set
up. Make sure all home entertainement devices
can be operated with an infrared remote control.
PROBLEM:
TV/VCR combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some combo
units may require both a TV code and a VCR
code for full operation (see page 12).
PROBLEM:
No volume on a second TV.
SOLUTION: Follow instructions in Changing Volume Lock
(see page 27).
PROBLEM:
Channel ▲, Channel ▼, and Previous CH
do not work for your RCA TV.
SOLUTION: Due to RCA design (1983-1987), only the original
remote control will operate these functions.
PROBLEM:
Changing channels does not work properly.
SOLUTION: If original remote control required pressing
ENTER to change channels, press ENTER on the
remote control after entering a channel number.
PROBLEM:
Tried “Search Method” and still could not find a
working code.
SOLUTION: Try the “Search Method” again after clearing out
the device key as follows: Press and hold Setup
until mode key blinks twice, then release. Next
enter 9 - 9 - 2. Then press and release the device
key to be cleared two times.
PROBLEM:
Remote control does not turn on Sony or Sharp
TV/VCR Combo.
SOLUTION: For power on, these products require programming TV codes on the remote control. For Sony,
use TV code 0000 and VCR code 0032. For Sharp,
use TV code 0093 and VCR code 0048.
29
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 30
REPAIR OR REPLACEMENT POLICY
If the DIRECTV® Universal Remote Control does not
function properly, DIRECTV will, in our sole discretion,
repair or replace the DIRECTV Universal Remote Control,
provided that:
a. You are a customer of DIRECTV and your account is in
good standing; and
b. The problem with the DIRECTV Universal Remote
Control was not caused by abuse, mishandling, alteration,
accident, failure to follow operating, maintenance or environmental instructions set forth in this User Guide, or
service performed by someone other than DIRECTV.
THE DIRECTV UNIVERSAL REMOTE CONTROL IS
PROVIDED ON AN AS IS,AS AVAILABLE BASIS, SOLELY
FOR YOUR NON-COMMERCIAL,RESIDENTIAL USE.
DIRECTV DOES NOT MAKE ANY REPRESENTATIONS OR
WARRANTIES OF ANY KIND,WHETHER STATUTORY,
EXPRESS OR IMPLIED, REGARDING THE DIRECTV
UNIVERSAL REMOTE CONTROL, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR
PURPOSE OR IMPLIED WARRANTIES ARISING FROM
A COURSE OF DEALING OR COURSE OF PERFORMANCE. DIRECTV EXPRESSLY DISCLAIMS ANY
REPRESENTATION OR WARRANTY THAT THE
DIRECTV UNIVERSAL REMOTE CONTROL WILL
BE ERROR FREE. NO ORAL ADVICE OR WRITTEN
INFORMATION GIVEN BY DIRECTV, ITS EMPLOYEES,
AND LICENSORS OR THE LIKE SHALL CREATE A
WARRANTY; NOR SHALL CUSTOMER RELY ON ANY
SUCH INFORMATION OR ADVICE.
UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL DIRECTV OR ANYONE ELSE INVOLVED
IN ADMINISTERING, DISTRIBUTING, OR PROVIDING
THE DIRECTV UNIVERSAL REMOTE CONTROL BE
LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, INCLUDING,WITHOUT
LIMITATION, LOSS OF REVENUES OR INABILITY TO
USE THE DIRECTV UNIVERSAL REMOTE CONTROL,
MISTAKES, OMISSIONS, INTERRUPTIONS, DEFECTS,
FAILURE OF PERFORMANCE, EVEN IF DIRECTV HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES.
Because some states do not allow the exclusion or limitation
of liability for consequential or incidental damages, in such
states, DIRECTV’s liability is limited to the greatest extent
permitted by law.
30
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 31
ADDITIONAL INFORMATION
This product does not have any user-serviceable parts.
Opening the case, except for the battery cover, may
cause permanent damage to your DIRECTV® Universal
Remote Control.
For help via the Internet, visit us at:
DIRECTV.com
Or ask for technical support at:
1-800-DIRECTV (347-3288)
Copyright 2003 by DIRECTV, Inc. No part of this publication may be reproduced, transmitted, transcribed, stored
in any retrieval system, or translated to any language, in
any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without prior written
permission of DIRECTV, Inc.
DIRECTV and the Cyclone Design logo are registered
trademarks of DIRECTV, Inc., a unit of Hughes
Electronics Corp.
MDTV6 for use with the DTVURC3B, DIRECTV
Universal Remote Control.
03/03
31
DirecTV Mnl MDTV6
3/21/03
2:04 PM
Page 32