Belkin | F1DV108 | User manual | Introduction Powering On the Splitter Powering On the Splitter
Add to my manuals
advertisement
P74184_F1DV104_108_QIG.qxd 3/10/03 3:40 PM Page 1
Introduction
This guide will lead you through the basic steps needed to install the
ExpandView Series Video Splitter (the Splitter). If you need further information during this installation, please refer to the Belkin User
Manual for this product.
You will need the following items for installation:
• OmniView ExpandView Series Video Splitter (included)
• One VGA Cable
• 9V DC, 1.5A Power Supply (included)
Powering On the Splitter
1.
Connect the included 9V DC, 1.5A power supply to an available power outlet.
2.
Attach the barrel plug into the power jack of the Splitter.
VIDEO IN
VIDEO OUT
VGA IN
VGA 8 VGA 7 VGA 6 VGA 5 VGA 4 VGA 3 VGA 2 VGA 1
Powering On the Splitter
1.
Make sure your computer is powered off.
2.
Using the OmniView Video Extension Cable (F1D9003-XX), connect the HDDB15 male-type connector to the video card on your computer.
3.
Connect the HDDB15 female-type connector to the input port on your Splitter.
VIDEO IN
VIDEO OUT
VGA IN
VGA 8 VGA 7 VGA 6 VGA 5 VGA 4 VGA 3 VGA 2 VGA 1
F1DV104
4.
Boot up your computer.
F1DV108
P74184_F1DV104_108_QIG.qxd 3/10/03 3:33 PM Page 2
Connecting Monitors to the Splitter
1.
Make sure your monitors are powered off.
2.
Connect the HDDB15 male-type connector of your monitor to the
HDDB15 female-type connector output port on your Splitter.
VIDEO IN
VIDEO OUT
VGA IN
VGA 8 VGA 7 VGA 6 VGA 5 VGA 4 VGA 3 VGA 2 VGA 1
3.
Turn ON your monitor.
Repeat steps 1-3 for each additional monitor you wish to connect.
You are now ready to use your Belkin OmniView ExpandView Series Video
Splitter. Please refer to your User Manual for additional information.
belkin.com
Belkin Corporation
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Belkin Components, Ltd.
Express Business Park
Shipton Way • Rushden • NN10 6GL
United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Belkin, Ltd.
7 Bowen Crescent • West Gosford
NSW 2250 • Australia
Tel: +61 (0) 2 4372 8600
Fax: +61 (0) 2 4372 8603
Belkin Tech Support
US: 310.898.1100 ext. 2263
800.223.5546 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 666 040
P74184
© 2003 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
OmniView
Video Splitter
™
Broadcast and control video signals on up to eight monitors
Quick Installation Guide
ExpandView ™ Series
F1DV104
F1DV108
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement