PORTABLE CD, CD-R / RW PLAYER
with CASSETTE RECORDER
and AM / FM STEREO RADIO
OWNER’S MANUAL
PD6513
Visit our web site at www.emersonradio.com
PD6513_D120403.p65
22
4/12/2003, 16:17
CAUT I ON
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
C AU T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle is intented to
alert the user to the presence
of uninsulated ‘dangerous voltage’
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK), NO USER
SERVICEABLE PARTS INSIDE
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
!
The exclamation point within
an equilateral triangle is intended to alert the user to
the presence of important
operating and maintenance
(ser vi ci ng) instr ucti ons in
the liter ature accompanying the appl iance.
IMPORTANT SAFETY INSTRUCTIONS
1.)
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
16.)
17.)
18.)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Only use attachments / accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
This appliance shall not be exposed to dripping or splashing water and no object filled with
liquids such as vases shall be placed on the apparatus.
Do not overload wall outlet. Use only power source as indicated.
Use replacement parts as specified by the manufacturer.
The product may be mounted to a wall only if recommended by the manufacturer.
Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.
1
PD6513_D120403.p65
1
4/12/2003, 16:17
BEFORE WE BEGIN
Thank you for purchasing this Emerson audio product. The Emerson brand is your
assurance of quality, performance and value.
Our engineers have included many useful and convenient features in this product.
Please be sure to read this Owner’s Manual completely to make sure you are
getting the maximum benefit from each feature.
This product was manufactured using the highest quality components and standards
of workmanship. It was tested by Emerson inspectors and found to be in perfect
working order before it left our factory. However, there is always the chance that
some problem may occur because of rough handling during shipment to the retail
store or to the final consumer.
If, after reading this Manual, you experience any problems with the operation of
this product, please refer to the instructions for obtaining service at the end of this
Manual. Emerson and Emerson retailers are committed to your satisfaction.
Once again, thanks for purchasing this Emerson audio product.
For future reference, record the serial number in the space provided.
Model No: PD6513
Serial No:
2
PD6513_D120403.p65
2
4/12/2003, 16:17
IMPORTANT NOTES
• Avoid installing this unit in places
exposed to direct sunlight or close to
heat radiating appliances such as
electric heaters, on top of other stereo
equipment that radiates too much heat,
places lacking ventilation or dusty areas,
places subject to constant vibration and/
or humid or moist areas.
• Operate controls and switches as
described in the manual.
• Before turning ‘On’ the power, make
certain that power cord is properly
installed.
• Store your CDs, cassettes in a cool area
to avoid damage from heat.
• When moving the set, be sure to first
disconnect the power cord.
• Do not attempt to clean this unit with
chemical solvents as this might damage
the finish. Use a clean dry cloth.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
This product contains a low power Laser Device.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
3
PD6513_D120403.p65
3
4/12/2003, 16:17
PREPARATION FOR USE
UNPACKING AND SET UP
·Carefully remove the unit from the carton and remove all packing materials from
the unit.
·Carefully remove any small strips of tape which may have been used to keep
the CD and Cassette doors closed during shipment.
·Open the CD compartment by placing you finger under the notch on the right
side of the CD door and lifting upward. Inside the CD compartment you will see
a white transit card which is used to prevent the laser pick-up from moving
during shipment. Carefully remove this card and close the CD compartment
door.
·Please save the carton and packing materials in the event that your unit ever
needs to be returned for service. The original carton and packing materials are
the only way to protect the unit from damage during shipment.
POWER SOURCES
This unit is designed to operate on 8 “C” batteries, not included, or on normal 120V
60Hz AC house current. Operating this unit from any other power source may
cause damage to the unit, and such damage is not covered by your warranty.
AC Operation
Connect the small end of the AC Power Cord to the AC socket on the back cabinet,
then insert the plug in any convenient household 120V 60Hz AC outlet.
4
PD6513_D120403.p65
4
4/12/2003, 16:17
NOTE:
This unit has a polarized AC plug with one
wide blade and one narrow blade. This plug
will only fit into a matching polarized AC
AC Outlet
outlet. This is a safety feature to reduce
the possibility of electric shock. If this plug
will not fit in your AC outlet, you probably
AC Plug
have an outdated non-polarized outlet. You
should have your outdated outlet changed by a qualified, licensed electrician. Do
not file the wide blade on the plug, or use an adapter to make the plug fit into your
outlet. This defeats the safety feature and could expose you to electric shock.
Battery Operation
1.) Remove the battery compartment door on
the back of the cabinet by pressing down
on the two tabs directly above the “OPEN
” marks.
2.) Insert 8 “C” size batteries into the battery
compartment according to the polarity
d i a g r am e n g r a v e d i n s i d e t h e
compartment. If the batteries are inserted
incorrectly the unit will not work.
3.) Replace the battery compartment door.
NOTE: In order to operate the unit on battery power the AC cord must be
disconnected from the AC socket on the back cabinet.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
5
PD6513_D120403.p65
5
4/12/2003, 16:17
LOCATION OF CONTROLS AND INDICATORS
TOP VIEW
9
3
5
4
2
7
6
8
11
FRONT VIEW
14
12
16
15
13
18
20
19
17
23
22
BACK VIEW
24
25
26
6
PD6513_D120403.p65
10
6
4/12/2003, 16:17
21
12
1.) BASS BOOST ON/OFF Switch.
2.) FUNCTION (CD / TAPE-RADIO OFF / RADIO ) Selector Switch.
3.) Volume Control.
4.) FM Telescopic Antenna.
5.) CD door.
6.) Carrying Handle.
7.) CD door OPEN Tab.
8.) BAND (AM / FM / FM ST.) Selector Switch.
9.) Dial Pointer.
10.) TUNING Control.
11.) Cassette Control keys.
(PAUSE
/ RECORD
/ STOP
, EJECT
/ F.FWD
D
/REW
)
12.) Speakers.
13.) FM STEREO Indicator.
14.) CD REPEAT Button.
15.) CD PROGRAM Button.
16.) POWER ‘On’Indicator.
17.) CD Track LCD Display.
18.) CD SKIP – /Search
Button.
19.) CD SKIP + /Search
Button.
20.) CD PLAY/PAUSE
21.) CD STOP
Button.
Button.
22.) Built-in Microphone.
23.) Cassette door.
24.) Battery Compartment.
25.) AC Cord Socket.
26.) PHONES
(Stereo Headphone) Jack.
7
PD6513_D120403.p65
7
4/12/2003, 16:17
/ PLAY
Y
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1.) Move the FUNCTION selector to the RADIO position.
2.) Move the BAND selector to the desired band, FM ST, FM or AM.
3.) Tune to your desired station with the TUNING control. If you have set the BAND
selector to FM ST. (Stereo) and you tune to a FM Stereo station the FM STEREO
LED Indicator will light.
4.) Set the Volume control to the desired level.
5.) When you are finished listening move the FUNCTION selector back to the
TAPE (RADIO OFF) position to shut the power ‘Off’and extend the battery life.
Antenna Information
AM
The AM antenna is inside the
cabinet. IF AM reception is
unsatisfactory try rotating the
entire unit until you find the
position that provides the best
reception.
FM
Vary the direction of the FM antenna to find
the position that provides the best reception.
NOTE: If you are listening to a weak FM Stereo station you can usually improve
the reception by moving the BAND selector from the FM ST position to the FM
position, however the sound will now be mono.
8
PD6513_D120403.p65
8
4/12/2003, 16:17
PLAYING COMPACT DISCS
Note: Although this portable CD player can read CD-R and CD-RW discs, in addition
to normal CDs, the playability of CD-R and CD-RW discs may be effected by the
type of software that was used to create the discs, as well as the quality and condition
of the blank media you are using. 100% playability cannot be guaranteed. This is
not an indication of a problem with the player.
NORMAL PLAYBACK
1.) Move the FUNCTION selector to the CD position.
2.) Open the CD door by placing your finger in the OPEN notch on the right of the
door and lifting upward. If you have not already
removed the white transit card from the CD player,
please remove it now.
3.) Place your CD on the center spindle with the printed
label side facing up. Close the CD door. The player
will read the Table of Contents and the display will
show the total number of tracks on the disc. If the disc
is damaged or up side down, display shows “- -”
4.) Press the CD PLAY/PAUSE
button to begin
playback on Track 1. The PLAY Indicator appears in
the display .
PLAY
• To skip to higher or lower numbered tracks during playback press the
or
button repeatedly until the desired track number appears in the display..
Playback will begin on the selected track.
• To search rapidly forward or backward during playback to locate a specific
portion of a track, depress and hold the
or
button. The player will search
rapidly forward or backward as long as the buttons are depressed. Normal
speed playback will resume when the buttons are released.
• To Pause momentarily during playback press the
button again. The sound stops
PLAY/PAUSE
and the PLAY Indicator flashes, however the disc
continues to spin. To cancel Pause and resume
PLAY
normal playback press the PLAY/PAUSE
button
once more. Normal playback resumes and the PLAY Indicator stops flashing.
9
PD6513_D120403.p65
9
4/12/2003, 16:17
5.) Adjust the Volume and BASS BOOST control as desired.
6.) To Stop playback at any time press the CD STOP button. The disc stops and
the display again shows the total number of tracks on the disc. After the last
track has played the disc stops automatically and the display again shows the
total number of tracks on the disc.
7.) Open the CD door, remove your disc, and close the CD door again.
8.) Move the FUNCTION selector to the TAPE (RADIO OFF) position to shut the
power ‘Off’.
TO START PLAYBACK FROM A SPECIFIC TRACK
Insert your disc in the player, close the door, and wait until the display shows the
or
total tracks. Press either the
button until the desired track number appears
in the display, then press the PLAY/PAUSE
track.
button to begin playback on that
REPEAT PLAYBACK
You can program the player to repeat either a single track or all tracks on the disc
continuously. The Repeat feature can be activated while the disc is playing or
while the disc is stopped.
One Track Repeat
Press the REPEAT button once. The REP. indicator
appears on the display. Select the track you wish to repeat
with the
PAUSE
or
buttons and then press the PLAY/
Y/
button. The selected track will be repeated
REP
PLAY
continuously.
To cancel One Track Repeat press the STOP
button.
ALL Tracks Repeat
Press the REPEAT button twice. The REP. A indicator
appears on the dispaly. Press the PLAY/PAUSE
button to begin playback. The entire disc will be repeated
REP. A
PLAY
continuously.
To cancel All Tracks Repeat press the STOP
button.
10
PD6513_D120403.p65
10
4/12/2003, 16:17
PROGRAMMED PLAYBACK
You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing
press the STOP
steps below.
button to stop playback before you begin the programming
1.) Move the FUNCTION selector to CD, insert your disc in the player, close the
door, and wait until the total track number appears in the display.
2.) Press the CD PROGRAM button once. The PROG
Indicator flashes and program memory “00” begins
PROG
flashing in the display.
3.) Use the
/
buttons to select the first track to
be programmed. (Example: Track 08).
PROG
4.) When track number “08” flashes in the display, press
the PROGRAM button once again to enter the track
“08” in program memory number “01”. Track number
“08” disappears and program memory number
PROG
returns to “00”, indicating that you may now select
a track to be entered in program memory number “02”.
5.) Use the
/
buttons to select the next track to be programmed. When the
desired track number appears in the display press the PROGRAM button again
to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks
in the program memory. When the memory is full,
PROG
“- -” indicator flashes.
7.) To begin programmed playback press the PLAY/
PAUSE
button. The LCD display will show the
first programmed track and playback will begin on
that track. The PROG Indicator flashes.
PLAY
PROG
11
PD6513_D120403.p65
11
4/12/2003, 16:17
After the last programmed track has played the player
stops but the program remains in the memory. To play
the programmed tracks again, press the PROGRAM
button, then the PLAY/PAUSE
button.
To cancel the programmed sequence from memory press the PROGRAM button,
then press the STOP
button, open the CD door, or move the FUNCTION selector
to the TAPE (RADIO OFF) position.
Program Repeat Playback
You can use the Program and Repeat features together to continuously repeat a
programmed sequence of tracks.
First, program the desired tracks according to Steps 1 through 7 in previous page.
W hen Programmed Playback begins press the
REPEAT button twice to activate the All Tracks Repeat
feature. The REP. A Indicator appears in LCD display
and all the tracks in your programmed sequence will be
REP. A
PLAY
PROG
repeated continuously.
12
PD6513_D120403.p65
12
4/12/2003, 16:17
PLAYING CASSETTE TAPES
1.) Open the cassette door by pressing the STOP
/ EJECT
key..
2.) Place a pre-recorded cassette tape into the slots on the inside of the door with
the exposed tape facing up and the full reel on the right side.
Close cassette door.
3.) Move the FUNCTION selector to the TAPE position.
4.) Press the cassette PLAY
key to begin playback.
5.) Set the Volume and BASS BOOST controls as desired.
6.) To advance the tape rapidly press the F. FWD
it ends press the STOP
/EJECT
key..
7.) To rewind the tape rapidly press the REW
ends press the STOP
/EJECT
key. To stop the tape before
key. To stop the tape before it
key..
7.) When the tape ends the Automatic Stop System releases the PLAY
key and
shuts off the tape motor. You may then open the cassette door, remove your
tape, turn it over and play the other side if desired.
8.) When you are finished listening, stop the tape, open the door, remove the tape
and close the door. If you are playing a tape and then switch to the RADIO or
CD function be sure to press the STOP
/EJECT
key to disengage the
tape mechanism. This prevents excess wear and tear on the mechanism.
IMPORTANT:
Always press the STOP /EJECT
key to shut off the tape motor before opening
the cassette door to remove your tape. The Automatic Stop System does not function
in the F. FWD
REW
and REW
modes. When the tape ends in the F. FWD
modes the motor continues to run. You must press the STOP
and
/EJECT
key to shut off the motor before opening the door to remove your tape.
13
PD6513_D120403.p65
13
4/12/2003, 16:17
MAKING A TAPE RECORDING
This model allows you to make tape recordings directly from the CD player, the
radio, or “live” through the built in condenser microphone.
• Refer to “PLAYING COMPACT DISCS” if necessary to operate the CD player.
• Refer to “LISTENING TO THE RADIO” if necessary to tune in the station you
wish to record from radio.
• To make a “live” recording through the built in condenser microphone, set the
FUNCTION selector to the TAPE (RADIO OFF) position.
1.) Press the STOP
/EJECT
key to open the cassette door..
2.) Insert a good quality blank cassette tape into the slots on the cassette door
with the open end facing up and the full reel on the right. Use normal tape only.
Do not use tape identified as “CrO2” (Chrome) or “Metal” tape formulations.
For best results use tapes of 60 minutes (C-60) or less. Do not use 90 minute
or 120 minute tapes as these thinner tapes are more likely to jam in the
mechanism.
3.) Close the cassette door.
4.) When you are ready to start recording press the RECORD
key. The PLAY
Y
key will also engage. The CD you are playing, or radio program you selected
will be recorded directly on to the tape.
5.) If you are making a “live” recording all of the sounds picked up by the condenser
microphone will be recorded directly on to the tape. For best results when
making “live” recordings try to stay within six feet of the condenser microphone.
6.) Press the PAUSE
key during recording to stop the tape temporarily and
avoid recording unwanted material such as radio commercials.
7.) When you have finished recording press the STOP
/EJECT
and remove the tape.
14
PD6513_D120403.p65
14
4/12/2003, 16:17
key to stop
Automatic Recording Volume Level Control
This unit has an Automatic Level Control (ALC) circuit which controls the recording
volume level and prevents overloaded and distorted recordings. The Volume control
has no effect on recording volume level. You may change the Volume control setting
during the recording or even reduce the volume level to “Minimum”. This will not
effect the level of the recording.
STEREO HEADPHONE JACK
Connect a set of stereo headphones (not included) with a 3.5mm mini plug to the
PHONES
jack located at back cabinet for private listening without disturbing
others. Before putting on the headphones reduce the Volume control to a low
level, then put the headphones on and gradually increase the Volume control to a
comfortable listening level. The built in speakers are automatically disconnected
when headphones are connected to the headphone jack.
15
PD6513_D120403.p65
15
4/12/2003, 16:17
CARE AND MAINTENANCE
ABOUT CASSETTE TAPES
Whenever you record on a cassette any previously recorded material is erased as
the new material is recorded. To prevent you from accidentally erasing material
which you wish to save, blank cassettes are equipped with erase prevention tabs
for each side of the tape. If the erase prevention tab for side A is removed, you
cannot accidentally record on side A. The RECORD
key cannot be depressed if
the erase prevention tab on the cassette has been removed.
To prevent accidental erasing on side A of a cassette use a small screw driver or
similar tool to break off the erase prevention tab for side A. This prevents the
record key from locking.
A
TAB FOR SIDE A
BREAK OUT TO PREVENT RECORDING
If later you do wish to record on side A of the cassette, cover the tab opening with
a piece of cellophane tape. This will allow the record key to function again.
A
COVER OPENING WITH TAPE
IN ORDER TO RECORD AGAIN.
16
PD6513_D120403.p65
16
4/12/2003, 16:17
CASSETTE CARE
Two common causes of trouble experienced when using cassettes are:
1.) Tape jamming — Leading to uneven speed in playback, and
2.) Tape tangling — Where the tape wraps itself around vital parts of themechanism.
To reduce the likelihood of these problems occurring, the following precautions
should be observed:
• Check that there are no loose layers of tape visible
through the cassette center window (see Fig. 1).
Take up any loose layers, using a pencil or hexagonal
barrelled ballpoint pen, before inserting the cassette
into the machine (see Fig. 2).
• If the cassette feels “tight” while performing operation
shown (see Fig. 2), the tape may be jamming due to
“ridges” formed in the winding of the tape (visible
through the center window). These may be removed,
in most cases, by fast winding of the cassette from
one end to the other and back again.
• Use only well-known brands of tape. Avoid use of C-120 cassettes.
Furthermore, do not expose cassettes to direct sunlight, dust or oil, and do not touch
the tape surfaces.
HEAD CLEANING
The tape heads, pinch roller and capstan require periodic cleaning. This removes
particles of the metal oxide coating that wear off the tape and accumulate on these
parts and impair performance. Switch off the power, press the STOP/EJECT
key
key. Clean the tape heads, pinch
to open the cassette door, and press the PLAY
roller and capstan with a soft cloth or cotton pad dampened in isopropyl alcohol or
special tape head cleaner.
Pinch Roller
Capstan
Record/Play
Head
Erase Head
17
PD6513_D120403.p65
17
4/12/2003, 16:19
COMPACT DISC CARE
• To remove a disc from its storage case, press down on the center of the case
and lift the disc out, holding it carefully by the edges.
• Fingerprints and dust should be carefully wiped off the disc’s recorded surface
with a soft cloth.Unlike conventional records, compact discs have no grooves
to collect dust and microscopic debris, so gently wiping with a soft cloth should
remove most particles. Wipe in a straight line from the inside to the outside of
the disc. Small dust particles and light stains will have absolutely no effect on
reproduction quality.
• Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents
or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.
• Never write on or affix labels to the surface of compact discs.
CARE OF THE CABINET
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax,
polish sprays, or abrasive cleaners on the cabinet.
CAUTION:
Never allow any water or other liquids to get inside the unit while cleaning.
18
PD6513_D120403.p65
18
4/12/2003, 16:17
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service.
Symptom
Radio
Noise or sound
Possible Cause
Solution
Station not tuned properly for
Retune the AM or FM
distorted on AM or FM
broadcasts.
AM or FM.
FM: Telescopic antenna is not
broadcast station.
Extend FM Telescopic
extended.
AM: The bar antenna is not
antenna.
Reposition the unit until
FM STEREO indicator
positioned correctly.
best reception is obtained.
The BAND selector is switched Switch the BAND selector
does not light.
AM or FM, no sound.
to FM position.
to FM ST position.
FUNCTION switch is not set to Set FUNCTION switch to
RADIO.
Volume at minimum.
Compact Disc Player
CD Player will not play.
CD skips while playing.
RADIO.
Increase Volume.
FUNCTION switch is not set to Set FUNCTION switch to
CD.
CD is not installed or installed
CD.
Insert CD with Iabel side
incorrectly.
Disc is dirty or scratched.
up.
Wipe disc with cloth or use
another disc.
R
SERVICE
TO FIND THE LOCATION AND PHONE
NUMBER OF YOUR NEAREST SERVICE
CENTER PERMITTED TO PERFORM
WARRANTY...
CALL TOLL FREE: 1-800-695-0098
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE
PLEASE CALL:
1-800-898-9020
FOR CUSTOMER SERVICE, PLEASE WRITE TO:
Emerson Radio Corp.
Consumer Affairs Dept.
1901 Diplomat Drive,
Farmers Branch, TX 75234.
19
PD6513_D120403.p65
19
4/12/2003, 16:17
LIMITED WARRANTY
Emerson Radio Corp. warrants manufacturing defects in original material, including
original parts and workmanship, under normal use and conditions, for a period of
ninety (90) days from the date of original purchase in the U.S. With your dated
proof of purchase, we will provide repair service at no charge for labor and parts at
an authorized Depot Repair Facility, or replace the product in our discretion. For
repair or replacement, pack your unit in a padded box, enclose your check or
money order payable to Emerson Radio Corp. in the amount of $9.00 (not required
by California residents) to cover shipping and handling costs, and enclose a copy
of your proof of purchase. Send your unit to:
Emerson Radio Corp.
1901 Diplomat Drive.
Farmers Branch, TX 75234.
This warranty does not cover damage from negligence, misuse, abuse, accident,
failure to follow operating instructions, commercial use, rental, repairs by an
unauthorized facility, or products purchased, used, serviced or damaged outside
of the United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
AU898M
20
PD6513_D120403.p65
20
4/12/2003, 16:17
R
EMERSON
Part No.: 16-2839D
312-01
PD6513_D120403.p65
Printed in China
21
4/12/2003, 16:17