Samsung AA59-00411A - Original Remote Control Specifications

Ow
st
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
- Model
- Serial No.
Contents
•
•
•
•
Accessories .............................................................................
Viewing the Control Panel .......................................................
Viewing the Connection Panet ................................................
Remote Control .......................................................................
4,
•
•
•
•
•
•
•
Connecting
Connecting
Connecting
Connecting
Connecting
Connecting
Connecting
Connecting
3
3
4
5
VHF and UHF Antennas ...................................... 6
Cable TV .............................................................. 6
a VCR .................................................................. 7
a Camcorder ........................................................ 7
a DVD Player/Set-Top Box .................................. 8
a DVD Player/Set-Top Box via HDMI ................... 8
a Digital Audio System ......................................... 9
an Amplifier/DVD Home Theater- Analog ........... 9
•
•
•
•
Plug & Play Feature ..............................................................
Memorizing the Channels .....................................................
To Select the Source .............................................................
To Edit the input Source Name .............................................
10
11
12
12
•
•
•
UsingAutomatic Picture Settings .......................................... 12
Changing the Screen Size .................................................... 13
Tilt ......................................................................................... 13
•
•
•
•
•
•
•
•
Clearing Scrambled Channels - Digital .................................
Adding and Erasing Channels ..............................................
Setting Your Favorite Channels ............................................
Viewing the Channel Lists .....................................................
Setting the Default Channel List Mode .................................
Labeling Channels-Analog ..................................................
Fine Tuning Analog Channels ...............................................
Checking the Digital-Signal Strength ....................................
15
15
16
16
16
17
17
17
Selecting a Menu Language .................................................
Setting the Time ....................................................................
Using the V-Chip ...................................................................
Viewing Closed Captions
(On-Screen Text Messages) - Analog ...................................
• Viewing Closed Captions
(On-Screen Text Messages) - Digital ....................................
• Menu Transparency Level .....................................................
• Setting the Blue Screen Mode ..............................................
• Adjusting the Melody Sound .................................................
• Setting the HDMI Black Level ...............................................
• Setting the Film Mode ...........................................................
4, Setting the Function Help......................................................
• Upgrading the Software ........................................................
17
18
19
•
•
•
•
•
•
•
•
•
•
•
•
•
UsingAutomatic Sound Settings ........................................... 13
Customizing the Sound ......................................................... 14
Setting the SRS TruSurround XT .......................................... 14
AutomaticVotume Control .................................................... 14
Choosing a Multi-Channel Sound (MTS) Track - Digital ....... 14
Choosing a Multi-Channel Sound (MTS)Track -Analog ...... 15
21
22
22
23
23
23
23
24
24
Setting Up Your Remote Control ........................................... 24
identifying Problems ............................................................. 27
Specifications
Symbols
m_
Press
Important
Note
One-Touch
Button
important Warranty information Regarding Television Format Viewing
Standard screen format televisions(4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format
full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying
stationary graphics and images on screen, such as the dark top and bottom letterbox bars(wide screen pictures), should be limited to no
more than 15% of the total television viewing per week.
Wide screen format televisions(16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format
full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen
if your model offers this feature, and constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on non-expanded standard format television video and programming, should be limited to no more than 15% of the total television
viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station Iogos, web sites or
computer graphics and patterns, should be limited as described above for alt televisions. Displaying any stationary images that
exceed the above guidelines can cause uneven aging of picture tubes(CRTs) that leave subtle, but permanent burned-in ghost
images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving
images, not stationary patterns or dark bars. On television models that offer picture sizing features, use these controls to view the
different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven CRT aging as a result of format selection and
use, as welt as other burned-in images, is not covered by your Samsung limited warranty.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Accessories
Please make sure the following items are included with your TV.
If any items are missing, contact your dealer.
RemoteControl(AA59-00411A)/
AAA Batteries
Owner'sInstructions/
SafetyGuideManual
WarrantyCards/
RegistrationCard
Viewing the Control Panel
You can control your TV's basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
_,_ If you press MENU button for less than 2 seconds, the button operates as MENU button.
Otherwise (pressed for 2 or longer time), it operates as ENTER button
......................................................................................
O
SOURCE
Toggles between all the available input sources (TV, AV1,
AV2, S-Video, Component1, Component2, HDMI, HDMI1 or
HDMI2(depending on the model)).
in the on-screen menu, use this button as you would use the
ENTER button on the remote control.
O
MENU
Press to see an on-screen menu of your TV's features.
Q
+ VOLPress to increase or decrease the volume. In the on-screen
menu, use the + VOL - buttons as you would use the 4 and 1_
buttons on the remote control.
O
ACHV
Press to change channels.
in the on-screen menu, use the zX CH V buttons as you
would use the A and _' buttons on the remote control.
O
Power Indicator
Lights up when you turn the power off.
- Power Off: Red
- Power On: Off
O
Remote Control Sensor
Aim the remote control towards this spot on the TV.
POWER
Press to turn the TV on and off
TX-T2701H/
TX-T3091WH
TX-T3092WH
............................
TX-T2793H/TX-T3003WH
_
Viewing the Connection Panel
Use the rear panel jacks to connect A/V components that will be connected continuously,
Rear of the TV
such as VCR or DVD players.
Side of the TV
TX-T2791 H/TX-T3091WH
O
m
I
O_.......l i_il;!¸ O
O o=lB|lm.........
oo
O
o
f--1
TX-T2793H/TX-T3092WH/TX-T3093WH
O
ANT IN
Connect to an antenna(air) or cable TV system.
O
AVlN I/AVIN 2
Video and audio inputs for external devices, such as a
camcorder or VCR
O
AV OUT
Connect to the audio/video input jacks of a recording VCR
0
COMPONENT IN 1, 2
Connect Component video/audio.
O
DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio component.
0
HDMI IN 2 (TX-T2793H/TX-T3092WH/TX-T3093WH only)
Connect to the HDMI jack of a device with HDMI output.
UPGRADE PORT (USB)
Connect for service and software upgrade.
HDMI/DVI IN (TX-T2791H/TX-T3091WH)
HDMII/DVI IN (TX-T2793H/TX-T3092WH/TX-T3093WH)
- Connect to the HDMI jack of a device with HDMI output.
These inputs can also be used as a DVI connection with
separate analog audio inputs.
An optional HDMI/DVl cable witl be necessary to make this
connection. When using the optionat HDMI/DVI adapter, the
DVI analog audio inputs on your TV allow you to receive left
and right audio from your DVI device.
(HDMI/DVl connection to a computer is not possible.
This TV cannot be used as a Monitor with your PC.)
- When connecting this product via HDMI or DVI to a Set Top
Box, DVD Player or Games Console etc, make sure that it
has been set to a compatible video output mode as shown
in the table below. Failure to observe this may result in
picture distortion, image breakup or no picture.
- Do not attempt to connect the HDMI/DVI connector to a PC
or Laptop Graphics Card. (This wilt result in a blank screen
being displayed)
DVI IN/AUDIO L/R
DVI audio outputs for external devices.
_orted
modes for HDMt/DVl and Com_
(o = supported,X = notsupported)
480i
0
720p
1080i
HDMI_DV160Hz
X
O
O
O
Component
O
480p
O
O
O
S-VIDEO IN
Connect an S-Video signal from a camcorder or video game.
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote control, always point it
directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.
• This is a special remote control for the visually impaired, and has Braille points on the POWER, Channel, Volume, STOP and
PLAY/PAUSE buttons.
•
The performance of the remote control may be affected by bright light.
O
POWER
Turns the TV on and off.
O
Numeric Buttons
Press to directly select a channel.
_)
Q-
0
Press to select additional channels
being broadcast by the same station.
For example, to select channel '543", press '54", then press '-" and '3".
CH LIST
Used to display Channel Lists on the
screen.
O
ANTENNA
Press to select "Air" or 'Cable"
Q
VCR/DVD Functions
- Rewind
- Stop
- Play/Pause
- Fast Forward
Press to activate the backlight of
the VOL CH, and the active source
button (TV, DVD, CABLE, STB_VCR)
on the remote control.
_)
_)
_)
MENU
Displays the main on-screen menu.
UP MDOWN _r lLEFT 41RIGHT_. I
ENTER _<J
Use to select on-screen menu items
and change menu values.
RETURN
Returns to the previous menu.
P.MODE
Press to setect the picture mode.
&MODE
Press to select the sound mode.
AUTO PROG.
Press to automatically store selected
Air/Cable channels.
_{_ ADD/DEL
Use to store and delete channels
to/from memory.
_) SET
Sets the remote to control your TV,
VCR_ Cable_ DVD, or Set-Top Box.
_) TV, DVD, STB, CABLE, VCR
Press to operate your TV, DVD, STB,
CABLE (box)_ or VCR
_)
SLEEP
Press to select a preset time interval
for automatic shut off.
0-
_)
CH/% CH v
Press to change channels.
EXIT
Press to exit from the menu.
0=
INFO
Press to display information on the
TV screen.
_)
CAPTION
Controls the caption decoder.
Color buttons
Press to add or deiete channels
and to store channels to the favorite
channel list in the "Channel List"
menu. (Refer to pages 15~16)
S.STRENGTH
Press to check the digital signal
strength.
RSIZE
Press to change the screen size.
@ SRS
Selects SRS TruSurround XT mode.
_)
MTS
Press to choose Stereo, Mono or
Separate Audio Program (SAP
broadcast).
RESET
When your remote control does not
work, change the batteries and press
the RESET button for 2-3 seconds
before use.
Batteries in the Remote Control
1
2
3
_
_)) PRE-CH
Tunes to the previous channel.
FAV.CH
Press to switch to your favorite
channels.
MUTE
Press to temporarily cut off the sound.
VOL +, VOL Press to increaseor decrease the
volume.
_)
SOURCE
Press to display atl of the available
video sources.
Lift the cover at the back of the remote control upward as shown in the figure.
install two AAA size batteries.
_' Make sure to match the + and - ends of the batteries with the diagram inside the
compartment.
_' Do not mix battery types, i.e. alkaline and manganese.
Reptacethe cover.
Remove the batteries and store them in a coot and dry place if you won't be using the
remote control for a long time. The remote controi can be used up to about 23 feet from
the TV. (Assuming typical TV usage, the batteries last for about one year.)
Connecting VHF and UHF Antennas
Antennas with 300 Q Flat Twin Leads
If you are using an air antenna(such as a roof antenna or "rabbit ears") that has 300 £_twin fiat
leads, follow the directions below.
1
Place the wires from the twin leads under the screws on a 300-75 _ adapter(not supplied).
Use a screwdriver to tighten the screws.
2
Plug the adaptor into the ANT IN terminal on the back of the TV.
ANT IN
ANT
IN
Antennas with 75 Q Round Leads
1
Plug the antenna lead into the ANT IN terminal on the back of the TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV(one VHF and one U HF), you must combine the
two antenna signals before connecting the antennas to the TV. This procedure requires an
optional combiner-adaptor(available
at most electronics shops).
1 Connect both antenna leadsto the combiner.
2
ANT
IN
Plug the combiner into the ANT IN terminal on the back of the TV.
Connecting
Cable TV
Cable without a Cable Box
1
Plug the incoming cable into the ANT IN terminal on the back of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable
channels.
ANT
IN
ANT
IN
a Cable Box that Descrambtes All Channels
1
Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".
2
Connect the other end of this cable to the ANT IN terminal on the back of the TV.
to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels(such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable.
These items are available at most electronics stores.)
ANT
%
IN
CABL
cable
Cable Box
1
IN
_ _
Splitter
Find and disconnect the cable that is connected to the ANT
IN terminal on your cable box.
This terminal might be labeled 'ANT IN_, "VHF IN" or
simply, "IN".
2
Connect this cane to a two-way splitter.
3
Connect an Antenna cable between an OUT terminal on the
splitter and the iN terminal on the cable box.
4
Connect an Antenna cable between the ANT OUT terminai
on the cable box and the B-IN terminai on the RF(A/B)
switch.
_]_
"''_ L
_
J_
Cable Box
_l
[ =""_.\,_./,_
RF(A/B)
Switch
TV Rear
5
Connect another cable between the other OUT terminal on
the splitter and the A-IN terminal on the RF (A/B) switch.
6
Connect the last Antenna cable between the OUT terminal on
the RF (A/B) switch and the ANT IN terminal on the back of
the TV.
After you have made this connection, set the A/B switch to the 'W'
position for normal viewing. Set the A/B switch to the "B' position
to view scrambled channels. (When you set the A/B switch to "B",
you wilt need to tune your TV to the cable box's output channel,
which is usually channel 3 or4.)
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system(according
instructions on page 6). Skip step 1 if you have not yet connected to an antenna or a cable system.
_,_
•
Each VCR has a different back panel configuration.
•
When connecting a VCR, match the color of the connection terminal to the cable.
1
2
Unplug the cable or antenna from the back of the TV.
Connect the cable or antenna to the ANT IN terminal on the
back of the VCR.
VCR
3
Connect an Antenna cable between the ANT OUT terminal
on the VCR and the ANT iN terminal on the TV.
J\
4
Connect a Video Cable between the VIDEO OUT jack on
the VCR and the AV iN 1 [VIDEO] jack on the TV.
5
Connect Audio Cables between the AUDIO OUT jacks on
the VCR and the AV iN 1 [L-DVI IN/AUDIO-R] jacks on the
TV.
If you have a "mono' (non-stereo) VCR, use a
Y-connector (not supplied) to hook up to the right and
left audio input jacks of the TV. If your VCR is stereo,
you must connect two cables.
Rear
_
to the
of the TV
q@e
L_J
@ [_J
%
AntennaCable(Netsupp!ied)
Also, you can connect to AV IN 2 on the side panel of TV.
S-Video Connection
Your Samsung TV can be connected to the S-Video jack of a VCR.
(This connection delivers a better picture when compared to the regular video connection above.)
•
•
1
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cabte.
To begin, follow steps 1-3 in the previous section to
connect the antenna or cable to your VCR and your TV.
2
Connect an S-Video Cable between the S-VIDEO OUT jack
on the VCR and the AV IN 2 [S-VIDEO] jack on the TV.
3
Connect Audio Cables between the AUDIO OUT jacks on
the VCR and the AV iN 2 [L-AUDIO-R] jacks on the TV.
Side of the TV
Rear of the TV
VCR
Some games may be displayed with a cut off picture when
the TV is connected to a game player.
Connecting
a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
_,_
1
2
•
•
Each Camcorder has a different back panel configuration.
When connecting a Camcorder, match the color of the connection terminal to the cable.
Connect a Video Cable (or S-Video Cable) between the
AV IN 2 [VIDEO] (or S-ViDEO) jack on the TV and the
VIDEO OUT jack on the camcorder.
Connect Audio Cables between the AV IN 2
[L-AUDIO-R] jacks on the TV and the AUDIO OUT jacks on
the camcorder.
Camcorder
Side of the TV
Connecting a DVD PlayedSet-Top Box
The rear panel jacks on your TV make it easy to connect a DMD player/Set-Top Box.
_;_
1
2
•
Each DVD Player/Set-Top Box has a different back panel configuration.
•
When connecting a DVD Player/Set-Top Box_ match the color of the connection terminal to the cable.
Connect Component Cables between the COMPONENT
IN 1 [Y, PB, PR]or COMPONENT IN 2 [Y, PB, PR]jacks on
the TV and the COMPONENT OUT [Y, PB, PR]jacks on the
DVD Player/Set-Top Box.
Connect Audio Cables between the COMPONENT IN 1
[L-AUDIO-R] or COMPONENT IN 2 [L-AUDIO-R] jacks on
the TV and theAUDIO OUT jacks on the DVD Player/
Set-Top Box.
Component video separates the video into Y(Luminance
(brightness)), PB(Blue), and PR(Red) for enhanced video
quality. Be sure to match the component video and
audio connections. For example, if connecting the video
cable to COMPONENT IN, connect the audio cable to
COMPONENT IN also.
Rear of the TV
_ Component Cable(Net supplied)
Connecting a DVD PlayedSet-Top Box via HDMI
This connection
_;_
1
•
•
can only be made if there is an HDMt/DVI Output jack on the external device.
Each DVD Player/Set-Top Box has a different back panel configuration.
When connecting a DVD Player/Set-Top Box_ match the color of the connection terminal to the cable.
Connect an HDMI Cable between the HDMI/DVI IN
(or HDMI1/DVl IN, HDMI IN 2) on the TV and the HDMI
OUT on the DVD player/Set-Top Box or connect a DVI to
HDMI Cable or DVI-HDMI Adapter between the HDMI/DVI
IN (or HDMII/DVI IN, HDMI IN 2) jack on the TV and the
DVI jack on the DVD player/Set-Top Box.
If connecting via HDMI/DVL you must also connect audio
cables. Connect Audio Cables between the AV IN 1
Rear
of the
TV
Rear of the TV
[L-DVI IN/AUDIO-R] jacks on the TV and the AUDIO OUT
jacks on the DVD player/Set-Top Box.
When connecting via HDMI, you do not need to connect
Audio Cables. You onty need to connect Audio cables when
connecting via HDMI/DVI.
DVI to HDMI Cable
(Not supplied)
What is HDMI?
HDMI_or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video
signals using a single cable.
"Multimedia interface" is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP(High Bandwidth Digital Copy
Protection) coding feature installed, and supports multi-channel digital audio.
Connecting a DigitaJAudio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TM.
Each Digital Audio System has a different back panel configuration.
Connect an Optical Cable between the DIGITAL AUDIO
OUT (OPTICAL) jack on the TV and the Digital Audio Input
jack on the Digital Audio System.
When a Digital Audio System is connected to the DIGITAL
AUDIO OUT (OPTICAL) terminal: Decrease the gain
(volume) of the TV_and adjust the volume level with the
system's volume control.
Digital
Audio
System
Rear of the TV
5.1CH audio is possible when the TV is connected to an
external device supporting 5.1CH.
What is OPTICAL?
•
Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a transmission system of
digital audio in the form of a light wave that uses a glass conductor.
DIGITAL AUDIO OUT (OPTICAL}
! Component,
RF (Digital/Analog),
HDMI AV, S-Video
! Sound
Sound is
is output
not output
When the COMPONENT IN or HDMI IN jacks are connected, the Optical jack on the TV does not output audio. If you want to hear
audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Set-Top Box directly to an Amplifier or DVD Home
Theater, not the TV.
Connecting
_;_
•
•
an Amplifier/DVD
Home Theater =Analog
Each Amplifier/DVD Home Theater has a different back panel configuration.
When connecting an AmplJfier/DVD Home Theater, match the color of the connection terminal to the cable.
Connect Audio Cables between the AV OUT
[L-AUDIO-R] on the TV and AUDIO IN on the Amplifier/
DVD Home Theater.
When an audio amplifier is connected to the AUDIO OUT
[L-AUDIO-R] terminals: Decrease the volume of the TV,
and adjust the volume level with the Amplifier's volume
controk
Rear of the TV
[_ _:
_Amplifier/
I DVDHomeTheater
Audio Cable (Not supplied)
AV OUT L-AUDIO-R
t Component,
RF (Digital/Analog),
HDMI AV, S-Video
is output
!JSound
Sound is
not output
When the COMPONENT IN or HDMt IN jacks are connected, the AV Out jacks on the TV does not output audio. If you want to hear
audio, connect the AUDIO OUT jacks on the DVD player or Set-Top Box directly to an Amplifier or DVD Home Theater_ not the TV.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently:
1
Press the POWER button on the remote control.
The message Menu language, Shop Mode, Channels and Time will be set is displayed.
Press the ENTER button, then the message Select the language of the OSD. is displayed.
2
Press the ENTER button to enter the language.
Press the A or _' button to select language, then press the ENTER button.
The message Select Home Mode when installing this TV at home. is displayed.
Press the .,4or _- button to select Shop or Home, then press the ENTER button.
The message Selects the antenna to execute the Auto Program function, is displayed.
_• The default selection is Home.
• We recommend setting the TV to Home mode for the best picture in your home
environment.
• Shop mode is only intended for use in retail environments.
• If the unit is accidentally set to Shop mode and you want to return to Dynamic
(Home) mode, press the Volume button and then hold down the MENU button for
five seconds on the TV panel.
Press the A or V' button to memorize the channels of the selected connection.
Press the ENTER button to select Start.
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the 4 button, then press the A or T button.
Press the _,-button to select Start, then press the ENTER button.
Contact your local cable company to identify the type of cable system that exists in
your particular area.
The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete. The Clock Mode menu
is displayed.
To stop the search before it has finished, press the ENTER button with Stop selected.
Press the ENTER button.
Press the A or _' button to select Manual for setting the current time manually, then press
the ENTER button. The message Enter the current date and time. is displayed.
If you select Auto, Set to daylight saving time. is displayed, then go to step 9.
(If you want to set the time automatically, skip to step 9 below.)
Press the _ or _,, button to move to Month, Day, Year, Hour, Minute, or am/pro.
Set the date and time you want by pressing the A or T button, then press the ENTER
button.
You can set the Month, Day, Year, Hour, and Minute directly by pressing the number
buttons on the remote control.
The message Enjoy your watching, is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the message will automatically disappear
after several seconds.
Continued...
_the
Clock Automatically
9
Pressthe ENTER button.
Press the A or • button to select On or Off, then the ENTER button.
The message Select the time zone where you are located, is displayed.
10 Press the _. or T button to highlight the time zone for your local area.
Press the ENTER button.
If clock is not automatically set, see pages 18~19 to set the clock.
11 The message Enjoy your watching, is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the message will automatically disappear
after several seconds.
If you want to reset this feature...
1 Press the MENU button to display the menu.
Press the A or _' button to select Setup, then press the ENTER button.
2
Press the ENTER button to select Plug & Play.
For further details on setting up options, refer to the page 10.
The Plug & Play feature is only available in the TV mode.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both air and cable
channels. After the available channels are memorized, use the CN _*, and CH V button
to scan through the channels. This eliminates the need to change channels by entering
the channel digits. There are three steps for memorizing channels: selecting a broadcast
source, memorizing the channels(automatic) and adding or deleting channels(manual).
Selectin- the Video Si nal-source
Before your television can begin memorizing the available channels, you must specify
the type of signal source that is connected to the TV(i.e. an air or a cable system).
1 Press the MENU button to displaythe menu.
Press the A or T button to select Channel, then press the ENTER button.
2
Press the ENTER button select Antenna.
Press the A or _' button to select Air or Cable, then press the ENTER button.
Channels in Memor_
3
4
5
6
7
Press the A or _' button to select Auto Program, then press the ENTER button.
Press the A or T button to select the antenna connection, then press the ENTER button.
Air: "Ai¢ antenna signal.
Cable: "Cable" antenna signal.
Air+Cable: "Air" and "Cable" antenna signals.
If you selected "Air", then go to step 7.
Press the A or _' button to select Cable, then press the ENTER button.
The cable system menu is displayed.
Press the _i button, then the A or T button to select the cable system for analog and
digital channels respectively. Press the _,-button to select Start, then press the ENTER
button.
If you have Digital cable, select the signal source for both Analog and Digital.
STD, HRC, and IRC identify various types of cable TV systems. Contact your local
cable company to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected.
After all the available channels are stored, the Auto Program menu reappears.
You
can also
press the AUTO PROG. button on the remote control to bring up the Auto
Program
menu.
To Select the Source
Use to select TV or other external input sources such as DVD players, VCRs, etc.
connected to the TV.
1
2
Press the MENU button to display the menu.
Press the A or _r button to select Input, then press the ENTER button.
Press the ENTER button to select Source List.
Press the A or T button to select signal source, then press the ENTER button,
You can choose between the following sets of jacks: TV, AV1, Component1,
Component2, HDMI or HDMI1,2 (depending on the model) on the TV's rear panel and
AV2 or S-Video on the TV's side panel,
'1
[..........
'
_
Press
the SOURCE
the remote
view an external
signal source,
HDMI
wilt appearbutton
in theon
Source
list forcontrol
modelstoTX-T2791H
and TX-T3091WH,
HDMI1/HDMI2 will appear in the Source list for models TX-T2793H, TX-T3092WH,
and TX-T3093WH
,f
l
I _
SOURCE
oo sb,
/
,
_
l
......
To Edit the Input Source Name
Name the external device connected to the input jacks to make your input source
selection easier.
i
2
3
Press the MENU button to display the menu.
Press the A or _' button to select Input, then press the ENTER button.
Press the A or T button to select Edit Name, then press the ENTER button,
Press the A or T button to select AV1, AV2_S-Video, Component1, Component2,
HDMI (TX-T2791H and TX-T3091WH), or HDMI1, 2 (TX-T2793H, TX-T3092WH, and
TX-T3093WH) input jack, then press the ENTER button,
Press the A or T button to select VCR, DVD, D-VH& Cable ST& HD STB, Satellite STB,
PVR STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DVD HDD
Recorder, Internet TV Recv., Interactive TV Recv., VOD STB, or TV input source, then press the ENTER button.
Press the EXIT button to exit.
Using Automatic
Picture Settings
Your TV has three automatic picture settings ("Dynamic", "Standard", "Movie") that are
preset at the factory.
You can activate a Picture Setting by making a selection from the menu.
1
2
Press the
Press the
Press the
Press the
press the
MENU button to display the menu.
ENTER button to select Picture.
ENTER button to setect Mode.
J, or _' button to select the Dynamic, Standard, or Movie picture setting, then
ENTER button.
* Choose Dynamic for viewing the TV during the day or when ther e is bright light in the
room.
, Choose Standard for general TV watching mode.
* Choose Movie when watching movies.
r--_
Press
the
P, MODE
button
on
the
remote
control
to
select
one
of
the
standard
settings.
3
4
5
6
7
P_
8
Defaults
Press the EXIT button to exit.
_
II
II
_Mo__MOOE
_,z _,_,_,
_.
• _ _L J
iii
II
_
AUTQ
[
p_o_V
: :_
i
-
................
Press the A or V' button to select Color Tone, then press the ENTER button.
Press the A or T button to select Cool2, Coo11, Normal, Warml, or Warm2, then press
the ENTER button.
:_ When the picture mode is set to Dynamic or Standard, Warml and Warm2 cannot be
selected.
Sett'm sto the Factor
_
:
!
picture
Press the A or T button to select Contrast, Brightness, Sharpness, Color, or Tint,
then press the ENTER button.
Press the ,1 or I- button to decrease or increase the value of a particular item.
:_ You cannot adjust the Tint in DTV, Component or HDMI mode.
Press the ENTER button to return to Mode.
Press the & or T button to select Reset, then press the ENTER button.
Each picture mode can be reset.
.....................................
I
l_-J
......
_....................
_Tm
E
MTS
_Sf_S_ll) i]
Ji_--_
TF
I
_
_
!
l/
i
Ill
Changing the Screen Size
You can select the picture size which best corresponds to your viewing requirements.
1
Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2
3
Press the A or _' button to select Size, then press the ENTER button.
Press the A or _' button to select the screen format you want, then press the ENTER
button.
When Zoom1 or Zoom2 is selected, you can adjust the vertical position of the enlarged
picture using the A or _' button and initializethe display selecting the Reset.
Press the EXIT button to exit.
.. 16;9: sets the picture to 16:9 wide mode.
.* Zoeml: Magnifies the size of the picture on the screen.
,. Zoom2: Expands the Zoom1 format picture.
t WideFit:Enlargestheaspectrati0ofthepictu[et0fittheentirescre
[_
en.
I
]1 _
_
aUTO_'_O_AUO/_EL
I_
Press the P.SlZE button on the remote control repeatedly to change the picture size.
fL
4i
'_LZ]t
MIS_
J ,_
g,,,j
The Screen Size Changing feature availability depends on the signal's format of the current broadcast your TV is receiving.
_,_
_, Only 16:9 and 4:3 are available in DTV Component (720p, 1080i) and HDMI (720p, 1O8Oi)modes.
_, Wide Fit sets the optimum picture format by expanding it both horizontally and vertically.
Wide Fit does not support all external devices (DVD, VCR etc.).
16:9
Zoom1
S-_sthepicturete16:g
_es
Zoom2
wide mode.
picture on screen. It is
_erticaltg en!arged.
the size d the _es
the size of
the picture more than
Zoom1. ]ts vertica!ty
enlarged.
WideFit
_theaspect
4:3
_'_s the pictureto 4:3
ratio of the picture to fit
the entire screen.
norma! mode.
Tilt
Due to the Earth's magnetic field there may be some minor image tilt depending on the
TV's location. When this occurs, follow the steps below.
1
Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2
Press the A or T button to select Tilt, then press the ENTER button.
3
Press the 4 or _- button to adjust screen tilt.
Press the EXIT button to exit.
Using Automatic
Sound Settings
Your TV has automatic sound settings ("Standard", "Music", "Movie", "Speech", and
"Custom") that are preset at the factory. Or, you can select "Custom", which automatically
recalls your personalized sound settings.
1
2
Press the MENU button to display the menu.
Press the _. or T button to select Sound, then press the ENTER button.
Press the ENTER button to select Mode. Press the A or T button to select Standard,
Music, Movie, Speech, or Custom sound setting, then press the ENTER button.
Press the EXiT button to exit.
Choose Standard for the standard factory settings,
* Choose Music when watching music videos or concerts-
r-----n...... r..........
i
_ _
_
_, Choose Movie when watching movies,
Choose Speech when watchlng a show that is mostly dlaiog (i.e., news).
i
!
....
_}
ress the S.MODE button on the remote control repeatedly to select one of the standard
sound settings.
_:----T ...... Tr---q
L _ _
J
i
_ ,_oo_ i_o_,._!,
H ............ _.,_
_
[_____U
cJ
// i
/J
!
.[L____J
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
(Alternatively, you can use one of the "automatic" settings.)
1
2
3
Press
Press
Press
Press
Press
Press
the
the
the
the
the
the
MENU button to display the menu.
A or T button to setect Sound, then press the ENTER button.
A or T button to seIect Equalizer, then press the ENTER button.
_ or _,, button to select a particular frequency to adjust.
A or T button to increaseor decrease the level of the particular frequency.
EXIT button to exit.
•
R/L Sound Balance Adjustment:
To adjust the sound batance of the R/L speakers.
• Bandwidth Adjustment(10OHz, 300Hz, 1KHz, 3KHz, f0KHz):
To adjust the level of different bandwidth frequencies.
if you make any changes to the equalizer settings, the sound mode is automatically switched to the Custom.
Setting the SRS TruSurround
XT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1
multichannel content over two speakers. TruSurround delivers a compelling, virtual
surround sound experience through any two-speaker playback system, including internal
television speakers. It is fully compatible with all multichannel formats.
1
2
3
[_
Press the MENU button to display the menu.
Press the A or T button to select Sound, then press the ENTER button.
Press the A or T button to select SRS TruSurround XT, then press the ENTER button.
Press the A or _r button to select Off or On, then press the ENTER button.
Press the EXIT button to exit.
Press the SRS button on the remote control to select On or Off.
SRS(O_
_
TruSurround
TruSurround
Automatic
XT, SRS and (e) Symbol are trademarks of SRS Labs, Inc.
XT technology is !ncorporated under !icense from SRS Labs, Inc,
Volume Control
Reduces the differences in volume level among broadcasters.
i
2
3
Press
Press
Press
Press
Press
the
the
the
the
the
MENU button to display the menu.
_. or _' button to select Sound, then press the ENTER button.
A or T button to select Auto Volume, then press the ENTER button.
A or _' button to select On or Off, then press the ENTER button.
EXIT button to exit.
Choosing a IVlulti-Channel Sound (MTS) Track = Digital
The digitaI-TV transmission system is capable of simultaneous transmission of many
audio tracks (for example, simultaneous translations of the program into foreign
languages).
The availability of these additional "multitracks" depends upon the program.
1
2
3
[_
Press the MENU button to display the menu.
Press the A or _' button to select Sound, then press the ENTER button.
Press the _, or T button to seIect Multi-Track Options, then press the ENTER button.
Press the ENTER button to seiect Preferred Language. Press the A or V' button to choose
the language (English, Spanish, or French) you want, then press the ENTER button.
Press the EXIT button to exit.
ress the language.
MTS button on the remote control to listen in a language other than the
preferred
i
II
L
li
i
Choosing a IVlulti-Channel Sound (MTS) Track =Analog
1
2
3
4
Press
Press
Press
Press
the MENU button to display the menu.
the A or T button to select Sound, then press the ENTER button.
the A or _' button to select Multi-Track Options.
the ENTER button to select Multi-Track Sound.
Press the _, or _' button to select a setting you want, then press the ENTER button.
Press the EXIT button to exit.
,, Choose Mono for channels that are b[oadcasting in moao, Or if YOUare having difficulty
receiving a stereo signal.
* Choose Stereo for channels that are broadcasting in stereo,
lannuane
=
translation
Ch°ose
listenon
tothe
the remote
Separate
Audi°repeatedly
pr°gram' to
which
is usuatlYa
f°reign'orSAP,
r-_ _Press
the SAP
MTS to
button
control
select
Mono, Stereo,
t._MJ
Clearing Scrambled Channels =Digital
The Clear Scrambled Channel function is used to filter out scrambled channels after Auto
Program is completed. It removes the scrambled channels from the list by tuning the
digital cable channels. This process may take up to 20-30 minutes.
1
2
3
Press the MENU button to display the menu.
Press the A or _r button to select Channel, then press the ENTER button.
Press the A or _' button to select Clear Scrambled Channel, then press the ENTER
button, It searches scrambled channels, which are to be removed from the list.
To stop searching scrambled channels;
Press the ENTER button to select Stop.
Press the _ button to select Yes, then press the ENTER button.
When the scrambled channel searching is completed, press the ENTER button.
Press the EXIT button to exit.
Adding and Erasing Channels
You can add or delete a channel to display the channels you want.
To use the Channel List function, first run Auto Program (see page 11).
1
2
3
4
5
Press
Press
Press
Press
the
the
the
the
MENU button to display the menu.
_. or V button to select Channel, then press the ENTER button.
A or T button to select Channel List, then press the ENTER button.
ENTER button to select All.
Press the A/T/4/_button to select a channel to delete, then press the ENTER button.
Press the A or _' button to select Delete, then press the ENTER button to delete the
channel. The "_" symbol disappears. Press the RETURN button to go back.
Press the A/T/4/_
button to select a channel to add, then press the ENTER button.
Press the A or V button to select Add, then press the ENTER button to add the channel.
Press the EXIT button to exit.
All added channels will be shown on Added menu.
* Red button! Press repeated y t0 Select All, Added, or Favorite:
*, Green button: Press to add all channels deleted.
_. Yellow button: Press to delete all channels memorized:
_
ress the ADD/DEL button on the remote control. Press the CH _. and CH V
setect the channel to be added or deteted, then press the ENTER button.
r-----_...... r.................
button to
I[
pMODE
II
i
II "_"
_
L___JJ. _
I
SMO[IE
AUTO PROG ADD/D
_
.....
PI
L
M1£
T ......
£STREN
_'_.
_"_,_ieq
-J
TH
IIiill
Setting Your Favorite Channels
You can set channels you watch frequently as favorites.
1
2
3
4
5
Press the MENU button to displaythe menu.
Press the A or T button to select Channel, then press the ENTER button.
Press the A or _' button to select Channel List, then press the ENTER button.
Press the A or _' button to select All or Added, then press the ENTER button.
Press the A/'_/41/I_ button to select a channel as a favorite channel, then press the
ENTER button,
Press the CH/x end CH V button to display the next channel list page.
Press the A or T button to select Favorite, then press the ENTER button, The "v" symbol
will appear and the channel will be set as a Favorite,
To cancel your Favorite channel selection, press the ENTER button until the "v" symbol
disappears,
Press the EXIT button to exit,
,,,,,,,,,,,,,,,,,,,,
_-- Only memorized channels can be set as favorite channels.
_- All favorite channels wilt be shown on the Favorite menu.
To
selectcontrol.
the favorite channels you have set up, press the FAV.CH button on the
remote
Viewing the Channel Lists
You can display a list of all channels, added channels or your favorite channels.
1
2
3
Press the MENU button to displaythe menu.
Press the A or T button to select Channel, then press the ENTER button.
Press the A or T button to select Channel List, then press the ENTER button.
Press the A or _' button to select All, Added, or Favorite, then press the ENTER button.
To toggle between your all channels, add channels, or favorite channels, use the red button
on the remote control,
Press the EXIT button to exit,
* Red button: Press repeatedly to select All, Added, or Favorite.
, Yellow button: Press to delete all channels memorized,
i......... _2_5_
_-_----_
_'_"_
I--- i
,LJ ............
,=,
LI
Setting the Default Channel List Mode
You can set All, Added, or Favorite to be the Default List that appears when you press the
CH LIST button.
1
2
3
4
Press
Press
Press
Press
Press
Press
the
the
the
the
the
the
MENU button to displaythe menu.
A or _' button to select Channel, then press the ENTER button.
A or V' button to select Channel List, then press the ENTER button.
A or T button to select Default List Mode, then press the ENTER button.
h, or T button to select All, Added, or Favorite, then press the ENTER button.
EXIT button to exit.
,, All: ShowsAIt the channels when you press the CH LIST button on the remote contrO,
,, Added: Shows Added channels when you press the CH LIST button on the remote
controI,
._ Favorite: SHOWSFavorite channels when you press the CH LIST button On the remote
control.
_
Press the CH LtST button on the remote control to bring up the Channel Lists.
i
:_
i
H
i/
(_
_
_
__
(_(_
_,J_'_"
/;_'$;_
_.___J
(_
_-_
__J_
H
)1
[
_
!
Labeling Channels =Analog
Channels can be labeled so that their call letters appear whenever the channel is selected.
1 Press the MENU button to display the menu
Press the J, or T button to select Channel, then press the ENTER button.
2
Press the _, or V' button to select Name, then press the ENTER button
3
Press the A or V' button to select the channel to be assigned a new name, then press the
ENTER button.
4
Press the A or T button to select a letter, a number or a blank(Results in this sequence:
A~Z, 0~9, +, -, *,/, blank).
Press the _ button to switch to the next field, which will be selected.
Select a second letter or digit by pressing the _. or V' button, as above.
Repeat the process to select the last three digits. When you have finished, press the ENTER button to assign the new name.
To erase the assigned new name_select Clear by pressing the 4 or I,- button_then press the ENTER button.
Press the EXIT button to exit.
•
•
The names of digital broadcasting channels are automatically assigned and thus cannot be assigned by users.
If you add or delete the TV channel_the corresponding labet information will also be added or deleted.
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
2
3
4
Press the MENU button to display the menu.
Press the _, or T button to select Channel, then press the ENTER button.
Press the A or T button to select Fine Tune_ then press the ENTER button.
Press the 4 or I_ button to adjust the fine tuning.
To store the fine tuning setting in the TV's memory, press the ENTER button.
To reset the fine tuning setting, press the _' button to select Reset, then press the ENTER button.
Press the EXIT button to exit.
•
•
Only analog TV channels can be fine tuned.
.... will appear next to the number of fine-tuned channels.
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from "snowy" to clear,
digital(HDTV) channels have either perfect reception quality or you will not receive
them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can,
however, adjust your antenna to improve the reception of available digital channels.
f
2
Press the MENU button to display the menu.
Press the _. or T button to select Channel, then press the ENTER button.
Press the A or • button to select Signal Strength, then press the ENTER button.
if the signal strength meter indicates that the signal is weak, physically adjust your antenna
to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest signal.
Press the EXIT button to exit.
You can also press the ENTER button to select OK, then press the EXIT button to exit.
You can also press the S.STRENGTN button on the remote control to check the signal
strength.
Selecting a Menu Language
1
2
3
Press the MENU button to display the menu.
Press the A or _' button to select Setup, then press the ENTER button.
Press the A or T button to select Language, then press the ENTER button.
Press the A or V' button to select the appropriate language: English_ Espahol or Fran£:ais_
then press the ENTER button.
Press the EXIT button to exit.
Setting the Time
Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching
the TV. (Just press the INFO button.)
_the
1
2
3
4
5
Clock Manually
Press the MENU button to display the menu.
Press the A or T button to select Setup, then press the ENTER button,
Press the A or T button to select Time, then press the ENTER button.
Press the ENTER button to select Clock.
Press the ENTER button to select Clock Mode.
Press the A or T button to select Manual, then press the ENTER button,
Press the _, or T button to select Clock Set, then press the ENTER button.
Press the 41or _,, button to move to Month, Day, Year, Hour, Minute, or am/pro.
Set the date and time you want by pressing the A or T button, then press the ENTER
button.
Press the EXIT button to exit.
The current time wilt appear every time you press the INFO button.
You can set the month, day, year, hour, and minute directly by pressing the number buttons
on the remote control.
_the
1
2
3
4
5
6
Clock Automatically_
Press the MENU button to display the menu.
Press the A or • button to select Setup, then press the ENTER button.
Press the A or '_ button to select Time, then press the ENTER button.
Press the ENTER button to select Clock.
Press the ENTER button to select Clock Mode.
Press the A or T button to select Auto, then press the ENTER button.
Press the h, or T button to select Time Zone, then press the ENTER button.
Press the A or _' button to highlight the time zone for your local area, then press the
ENTER button.
Press the A or T button to select DST (Daylight Saving Time), then press the ENTER
button. Press the A or T button to select On or Off, then press the ENTER button.
Press the EXIT button to exit.
Depending on the broadcast station and signal, the auto time may not be set correctly.
if this occurs, set the time manually.
Air or cable must be connected in order to set the time automatically.
_the
On/Off Timer
Use this feature to set the TV to turn on or off at a desired time. You must set the clock
first.
1
2
3
Press the MENU button to display the menu.
Press the A or '_ button to select Setup, then press the ENTER button.
Press the A or _' button to select Time, then press the ENTER button.
Press the A or T button to select Timer1, Timer2, or Timer3, then press the ENTER
button. The timer menu is displayed.
Press the ._1or _ button to select the required item below.
Press the A or _!' button to adjust to the setting satisfied.
Press the EXIT button to exit.
,_ On Timer i Select hour, minute, am/pro, and Inactivated/Activated.
(To activate timer with the setting satisfied, set to Activated )
,, Off Timer : Select hour, minute, am/pro, and Inactivated/Actiyated.
(To activate timer with the setting satisfied, set to Activated.)
,, Repeat : Select Once, Everyday, MON*-FRI, MQN*-SAT, or SATe,SUN
,_ Volume : Select the required volume level.
• Antenna :Select Air or CabJe.
,, Channel : Select the required channel.
You can set the hour, minute, and channel directly by pressing the number buttons on the remote control.
Auto Power Off
When you set the timer "On", the TV will eventually turn off if no controls are operated for 3 hours after the TV was turned on by
timer. This function is only available in timer "On' mode and prevents overheating, which may occur if a TV is on for tee long time.
Continued...
Settin
the Slee Timer
The Sleep Timer automatically
shuts off the TV after a preset time (from 30 to 180 minutes).
1
Press the MENU button to display the menu.
Press the A or '_ button to select Setup, then press the ENTER button,
Press the _, or T button to select Time, then press the ENTER button.
2
3
Press the A or T button to select Sleep Timer, then press the ENTER button,
Press the _, or T button to select the minute,
Setting the Timer sets the Activation to On automatically.
To cancel the set sleep timer:
Press the _- button to select Activation.
Press the _. or T button to select Off, then press the ENTER button.
Press the EXIT button to exit.
_
[-----_----_.r_..;--c..%;--_;.;_7.---_-.:
;.........
PresstheSLEEPbuttonontheremotecontroiuntiitheappropriatetimeinterva,
(any ofthepresetvaluesfrom30min,
appears,
to180 min.),
i
,
-A_
_
_
_
_P'_'_
Ou
_-_
'
"1l
Using the V-Chip
U.S.A Only
Th s product s covered by the following U.S. patents : US4,930,158 US4,930,160
The V-Chip feature automatically locks out programs that are deemed inappropriate for children.
The user must enter a PIN (Personal ID number) before any of the V-Chip restrictions are set up or changed,
How to Enable/Disable the V-Chi£
1
2
3
Press the MENU button to display the menu.
Press the A or _!' button to select Setup, then press the ENTER button.
Press the A or T button to select V-Chip, then press the ENTER button. The message
Enter PIN will appear. Enter your 4 digit PIN.
The default PIN of a new TV set is "0-0-O-0".
The V-Chip screen will appear.
To enable the V-Chip feature, press the ENTER button so that the V-Chip Lock field is On.
(Pressing the A or T button will alternate between On and Off.) Press the ENTER button.
S_r
4
5
Personal ID Number PIN
Press the A or T button to select Change PIN, then press the ENTER button.
The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them.
As soon as the 4 digits are entered, the Confirm new PIN. screen appears. Re-enter the
same 4 digits. When the Confirm screen disappears, your PIN has been memorized.
If you forget the PIN, press the remote control buttons in the following sequence, which
resets the pinto O-O-0-0: Power Off _MUTE
8
2
4 _ Power On.
How to Set u
Restrictions Usin
the 'TV Parental Guidelines'
First, set up a personal identification number(PIN), and enable the V-Chip. (See previous section.}
Parental restrictions can be set up using either of two methods: The TV Parental guidelines or the MPAA rating.
6
7
Press the _, or _' button to select TV Parental Guidelines, then press the ENTER button.
The TV Parental Guidelines screen will appear.
Press the A or T button to select one of the six aged based categories:
°
*
,
*
,*
]
TV-Y: AtI children. The themes and elements [n this program are specifically designee
for a very young auoience, including children from ages two to stx
TV-Y7: Directed to older children. The themes ano eJemenrsin th_s program may
mcluoe mHo 3nysicat or comedic woience, or may frighten chlldren under tne age d
seven.
TV-G: General audience. It contains tl[rle or no violence, no s[rong language, and httJe
or no sexual dialog or sauatlons.
TV-PG: Parental guidance suggested. This program ma_ contain infreuuen[ coarse
anguage. Ilml[ed violence some sugges[tve sexual olalog and situations
TV-t4: Parents strongly cautioned. Tnis program may contain sophisticated themes
sexual conrem, strong tanguage anu more intense Vlolence.
TV-MA: Mature audiences only. This program may contain mature themes profane
Continued...
"
8 Atthispoint,
one
oftheTV-Ratings
isselected.
Press
theENTER
button.
Depending
onyour
existing
setup,
the"_"
symbol will be
selected. (Blank = Unblocked, @= Blocked) While "_ ' is selected, press the ENTER button to block or unblock the category.
To select a different TV-Rating, press the A or _' button and then repeat the process.
,, FV: Fantasy Violence.
*D: Sexually suggestive dialog.
,, L: Adult language.
g
,, S: Sexuat situation.
_' V: Violence,
Allow all: Press to unlock all TV ratings.
Block all: Press to lock all TV ratings.
The TV-Y, TV-Y7, TV-G, TV-PG, TV-14 and TV-MA have additional options. See the next step to change any of the following
sub-ratings.
The V-Chip will automatically block certain categories that are "more restrictive". For example, if you block TV-Y category, then
TV-Y7 wilt automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the 'young adult" group
will be blocked (TV-G, TV-PG, TV-14, and TV-MA). The sub-ratings (D, L, S, V) work together similarly. (See next section.)
How to set the FV, V, S, L and D sub-ratings.
First, select one of these TV-Ratings: TV-Y, TV-Y7, TV-G, TV-PG, TV-14, or TV-MA (See Step 7), and press the ENTER button.
The "_" symbol wilt be displayed for each sub-rating. While "_ ' is selected, press the I_ button to go to a sub rating.
Press the ENTER button to block the sub rating. To select a different TV-Rating, press the A or _' button and then repeat the
process.
The V-chip will automatically block certain categories that are "more restrictive". For example, if you block L sub-rating in
TV-PG, then the L sub-ratings in TV-14 and TV-MA will automatically be blocked.
These categories consist of two separate groups: TV-Y and TV-Y7 (young children through age 7), and TV-G through TV-MA
(everybody else). The restrictions for these two groups work independently: If a household includes very young children as welt as
young adults, the TV guidelines must be set up separately for each age group.
How to Set u R_s
Usin the MPAA Ratin s: G, PG, PG-13, R, NC-17, X, NR
The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for
movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings
(either MPAA or TV-Ratings).
10 Press the A or T button to select MPAA Rating, then press the ENTER button.
11 Press the A or T button to select an appropriate restriction.
Press the ENTER button to activate the restriction selected. The "_" symbol is indicated.
While "_" is selected, press the ENTER button to block or unblock the category.
* G: Generat audience(no restriction).
* PG: Parental guidance suggested.
,, PG-13: Parents strongly cautioned.
, R: Restricted. Children under I7 should be accompanied by an adul L
t NC-17: No ch!ldren under age 17:
* X:Adults only.
* NR: Not rated.
Allow all: Press to unlock all TV ratings.
Block all: Press to lock all TV ratings.
The V-Chip witl automatically block any category that is "more restrictive". For example, if you block the PG-13 category, then
R, NC-17 and X wilt automatically be blocked also.
How to Set u
Restrictions Usin
the'Canadian
En lish' for canada models}
12 Press the A or _' button to select Canadian English, then cress the ENTER button.
13 Press the J, or T button to select an appropriate restriction.
Press the ENTER button to activate the restriction selected. The "_" symbol is indicated.
C: Programming intended for children under age 8.
* C8+: Programming generally P0nSideredacceptable for children 8 Years and ove r te
watch on their own.
*. G: Generat programming, suitable for atl audiences.
,, PG: parental guidance.
., t4+: Programming contains themes or content which may not be suitable fo r viewers
under the age of 14.
Allow all: Press to unlock all TV ratings.
Block all: Press to lock all TV ratings.
The V-Chip will automatically block any category that is "more restrictive". For example, if you block G category, then PG, 14+,
and 18+ will automatically be blocked also.
Continued...
How to Set u
Restrictions Usin
the 'Canadian French' (.for canada models}
14 Press the A or • button to select Canadian French, then press the ENTER button.
15 Press the J, or _' button to select an appropriate restriction.
Press the ENTER button to activate the restriction selected. The "_" symbol is indicated.
• G: Generat.
,, 8 arts*: Not recommended for young children.
,, t3 arts÷: Programming may not be suitable for children under the age of 13,
• 16 ans+: Programming is not suitable for children under the age of 16:
,, 18 ans+: Programming restricted to adults.
Allow all: Press to unlock all TV ratings.
Block all: Press to lock all TV ratings.
:,',',',',',',',','_
The V-Chip will automatically block any category that is "more restrictive". For example, if you block 8 ans+ category, then 13
ans% 16 ans% and 18 ans+ wilt automatically be blocked also.
Usin
theV-Chi
for Di ital channels
Parental restriction information
can be used while watching DTV channels.
16 Press the A or _' button to select Downloadable U.S. Rating, then press the ENTER
button.
_'_ • If information is not downloaded from the broadcasting station, the
Downloadable U.S. Rating menu is deactivated.
• Parental restriction information is automatically downloaded while watching DTV
channels. It may take several seconds.
• The Downloadable U.S. Rating menu is available for use after information
is downloaded from the broadcasting station. However. depending on the
information from the broadcasting station, it may not be available for use.
17 Press the A or T button to select an appropriate restriction.
Press the ENTER button to activate the restriction selected. The "@" symbol is indicated.
Press the EXIT button to exit.
•
•
•
•
•
•
Rating title
The number of current rating
title
The number of
all rating title
AltowAII: Press to unlock all TV ratings.
Block All: Press to lock ali TV ratings.
Parental restriction levels differ depending on the broadcasting station.
The default menu name and Downloadabte US rating changes depending on the downloaded information.
Even if you set the On-screen display to your desired language, the Downtoadable U.S. Rating menu will appear in
English only.
The rating will automatically block certain categories that are more restrictive.
The rating titles (for example: Humor LeveLetc) and TV ratings (for example: NV, MV, V_.etc) may differ depending on the
broadcasting station.
Viewing Closed Captions(On-Screen
Text Messages) -Analog
The Analog Caption function operates in either analog TV channel mode or external
signal mode. (Depending on the broadcasting signal, the Analog Caption function may
operate on digital channels.)
1
2
3
4
Press the MENU button to displaythe menu.
Press the _, or _' button to select Setup. then press the ENTER button.
Press the A or T button to seIect Caption, then press the ENTER button.
Press the ENTER button to seIect Caption.
Press the A or T button to select On, then press the ENTER button.
Press the A or _' button to select Caption Mode, then press the ENTER button.
Press the A or T button to select the submenu (Default, CC1~CC4 or Text1 ~ Text4) you
want, then press the ENTER button.
Press the EXIT button to exit.
* CCt: The Primary S__chronous Caption Service. These are cautions inthe primary
anguage that must be in sync '¢ ltn the sound, preferably matched to a specific frame.
, CC2: The Soecial Non-S_mchronousUse Cautions. This channel carries aa[a [na[ is
intended to augment information carried in the urogram.
- CC3: Secondary S__chronous Caution Service.Alterna[e program-rela[ea capuon aa[a.
typically second language captions.
- CC4: Soeciat Non-S_nchronous Use Cauuons. Similar to CC2.
- Text1: First Text Service. This may De vanous non-program related data.
- Text2: Second Text Service. Additional aa[a. usua ,j no[ program relatea.
,, Text3/Text4: Third Text Service. These data channels should be used onlj if Textl and
Text2 are not sufficient.
:.'.'.'.'.'.'.'.'.'_
• The default is Default.
4!, The availability of captions depends on the program being broadcast.
You
can also
press
CAPTION
button
onthe
the
remote control to select
Captions On or Off.
Viewing Closed Captions(On=Screen Text Messages) - Digital
The Digital Captions function operates on digital channels.
1
2
3
4
5
6
Press the MENU button to display the menu.
Press the A or _' button to select Setup, then press the ENTER button.
Press the _, or T button to select Caption, then press the ENTER button.
Press the ENTER button to select Caption.
Press the A or 'f' button to select On, then press the ENTER button.
Press the A or • button to select Caption Mode, then press the ENTER button.
Press the A or _' button to select the submenu (Default, Service1~ Service6, CC1~CC4,
or Text1 ~ Text4) you want, then press the ENTER button.
Press the A or _' button to select Caption Options, then press the ENTER button.
Press the A or _' button to select the desired caption option, then press the ENTER button.
Press the A or _r button to select the desired sub-menu options (see options below), then
press the ENTER button.
Press the EXIT button to exit.
* Size: This option consists of Default. Small. Standard. and Large.
* Font Style: This option consists of Default, Style0 - Style7. You can change the fonl
you wan[
* Foreground Color: This option consists of Default. White. Black. Red. Green. Blue.
Yellow. Magenta, and Cyan. You can cnange the color of the =et[er
* Background Color: This option consists of Default. White. Black. Red. Green. Blue.
Yellow, Magenta, and Cyan. You can change me bac!<groanacolor of the caDbon.
', Foreground Opacity: This option consists of Default Transparent. Translucent.
Solid and Flashing. Youcan change the opacity of the letter.
* Background Opacity: This option consists of Default, Transparent. Translucent
Solid and Flashing You can change the background opacity of the caption.
, Return to Default: This op[ion se[s each of Size. Font Style, Foreground Color
Background Color, Foreground Opacity, and Background Opacity to its factory
default
O
O
O
O
The availability of captions depends on the program being broadcast.
Default means to follow the standard set by the broadcaster.
Foreground Color and Background Color cannot be set to have the same color.
Foreground Opacity and Background Opacity cannot be both set to Transparent.
Menu Transparency Level
Adjusts the transparency
1
2
Press
Press
Press
Press
Press
the
the
the
the
the
of the menu screen.
MENU button to display the menu.
A or _' button to select Setup, then press the ENTER button.
A or _r button to seIect Menu Transparency, then press the ENTER button.
A or T button to select the level you want, then press the ENTER button.
EXIT button to exit.
You
can also
press
CAPTION
button
onthe
the
remote control to select
Captions On or Off.
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to
"Off".
1
2
Press
Press
Press
Press
Press
the MENU button to display the menu.
the A or _' button to select Setup, then press the ENTER button.
the A or _' button to select Blue Screen, then press the ENTER button.
the A or _' button to select On or Off, then press the ENTER button.
the EXIT button to exit.
Adjusting
the Melody Sound
The TV power on/off melody sound can be adjusted.
1 Press the MENU button to display the menu.
Press the A or T button to setect Setup, then press the ENTER button.
2
Press the A or V' button to setect Melody, then press the ENTER button.
3
Press the A or _' button to select Off, Low, Medium, or High, then press the ENTER
button.
Press the EXIT button to exit.
DD _
Manufactured under license from Dolby Laboratories. D0!bY and the doubte:D
i e I "[A L symbol are trademarks of DoIby Laboratories.
Setting the HDMI Black Level
Use this function when the screen is too dim in the HDMI mode. (by HDMI input for the
RGB limited range of 16 to 235)
1 Press the MENU button to display the menu.
Press the A or T button to select Setup, then press the ENTER button.
2
Press the A or T button to select NDMI Black Level, then press the ENTER button.
3
Press the A or _' button to select Normal or Low, then press the ENTER button.
Press the EXIT button to exit.
This function is active only when the externel input connects to HDMI(RGB signals).
Setting the Film Mode
Film mode automatically senses and processes film signals from all sources and adjust
the picture for optimum quality.
_,_ Film mode is supported in 480i only.
1
2
3
Press
Press
Press
Press
Press
the
the
the
the
the
MENU button to display the menu.
A or _' button to seIect Setup, then press the ENTER button.
A or _' button to select Film Mode, then press the ENTER button.
_, or T button to select Off or On, then press the ENTER button.
EXIT button to exit.
Setting the Function Help
Displays help on the menu functions.
1
2
Press
Press
Press
Press
Press
the
the
the
the
the
MENU button to display the menu.
A or _' button to select Setup, then press the ENTER button.
A or T button to setect Function Help, then press the ENTER button.
A or • button to select On or Off, then press the ENTER button.
EXIT button to exit.
The default setting of the function help is On.
Upgrading the Software
Samsung may offer upgrades for your TV's firmware in the future. Please contact the
Samsung call center at f-800-SAMSUNG to receive information about downloading
upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to
the USB port located on the back of your TV.
1
2
3
4
insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the back
of the TV.
Press the MENU button to display the menu.
Press the A or T button to select Setup, then press the ENTER button.
Press the A or T button to select SW Upgrade, then press the ENTER button.
Press the ENTER button to select USB.
USB Drive
The message Scanning for USB.. It may take up to 30 seconds, is displayed.
Please be careful to not disconnect the power or remove the USB drive while upgrades are
being applied.
The TV will shut off and turn on automatically after completing the firmware upgrade.
Please check the firmware version after the upgrades are complete.
_,_ The firmware and upgrade process may be different by country and region.
Setting Up Your Remote Control
After your remote control has been properly set up, your remote control can operate in
five different modes: TV, VCR, Cable, DVD, or Set-Top Box.
Pressing the corresponding button on the remote control allows you to switch between
these modes, and control whichever piece of equipment you choose.
I
POWER
_,_ The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and
Set-Top Boxes.
Your Remote Control to Operate Your VCR_Cable box, DVD or Set
1
2
3
4
4
Turn off your VCR, CABLE, DVD or STB.
Press the VCR, CABLE, DVD or STB button on your TV's remote control.
Press the SET button on your TV's remote control.
Using the number buttons on your remote control, enter three digits of the VCR, Cable box,
DVD or Set Top Box code listed on pages 25~27 of this manual for your brand of VCR,
Cable box, DVD or Set Top Box. Make sure you enter three digits of the code, even if the
first digit is a "0". (tf more than one code is listed, try the first one.)
Press the POWER button on the remote control. Your VCR, Cable box, DVD or Set Top Box
should turn on if your remote control is set up correctly.
if your VCR, Cable box, DVD or Set Top Box does not turn on, repeat steps 2, 3, and 4, but
try one of the other codes listed for the brand of your particular VCR, Cable box, DVD or
Set Top Box.
Note on Using Remote Control Modes: VCR, CABLE, DVD, STB.
When your remote control is in VCR, Cable box, DVD or Set Top Box mode, the volume
buttons still control your TV's volume.
Q
GG®
'MODE
SMOf_E
Ab_TO_OG
ADD/[_E}
RSlZE
SSTRENGTH
MTS
SRS
SAMSUNG
Continued...
Remote Control Codes
VCR
Brand
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTISMATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAt
GENERALELECTRIC
GO VIDEO
LG(Goldstar)
HARMANKARDON
HITACHI
INSTANTREPLAY
JC PENNEY
JCL
KENWOOD
KLH
LLOYD
LOGIK
LXl
JVO
MAGNAVOX
MARANTZ
MARTA
KONIA
ORION
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
Code
%0 001 002003 004005 077078 079
020
025
004027 032
007026
018
022
002003 006008 015055
021056
002003 006008 015055
007
002024
002007 008017 021025 056064 066
003010 011012013 014015 016
007026
017
025
034
001003 006021 022025 030032 034
040047 050052 060063 065066 067
069073
018024 028029 048051 061
025
002005 017021 056
002
006007 008009 010
007
019025 041042 074
021
002007 018019 021026 037041
054056
007008 018021 026037
007008 018026 037
070
025
038
025
08I 082 083
021056 059
007008 018021 026037 062
006
036
073074 075076
021
006021 024025
034
005
019041 075
Brand
MITSUBISHI
MONTGOMERYWARD
MTC
MULTITECH
NEC
OPTtMUS
PANASONIC
PENTAX
PENTEXRESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIOSHACK/
REALISTIC
RCA
YAMAHA
ZENITH
Code
019034041 046
020
002025
002005025 038
007008018 026037 062064
020
021056071 072
019041075
008
021056059
021080
019026039 053
015049055
017
018
021056
006018020 021024 025029 034
048056
002017019 021035 041043 057
068076
026
018024
003047052 067
006018019 024028 029041 048051
020034045 015
027033038 058
025
027033044
021025056 059
025
018025
006
037
025037068
021
006021025 031
066
003019029 051052
002006
002
007026
026
007026
002
002003006 019020 021024 025034
038041
007008018 026037
023027033
Code
%0 001 002003 004005 006007
041
003024 031
025030
038039
025030
019023 028
026
003022 027037 044
019021 023028
004018 020044
014022 040
003
Brand
REGENCY
SA
SCIENTIFICATLAN
SPRUCER
STARGATE2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VlEWSTAR
WARNERAMEX
ZENITH
Code
015023
042043
042043
022
036
016
016
032
033034
019021023 028
046
017029035 037045
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVIStON
UNITECH
VECTORRESEARCH
VICTOR
VIDEOCONCEPTS
VlDEOSONIC
WARDS
CABLE BOX
Brand
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Continued...
DVD
Brand
ANAM
AUDIOVOX
AUDIOLOGiC
ANABA
APEXDIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTISMATHES
CYBERHOME
CLARION
CIRRUS
CINEVlSION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN/ KARDON
IRT
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILEAUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
Code
030
075
085
072
070071 074086 083084 088
111112
114
062
074
122 123
027
065077 078079 082
080125
08I
095
066
146
067068
090
060
061089 133 135
069074
074
064 113
071
073
091 110
089
092
091
022033 115116
073
051 108109
073
059100 106 107
074075
025031
057
058
054
055
056
076093
074094
073
Brand
NORCENT
NEXTBASE
NEC
NANTAUS
NESA
OPTOMEDIAELECTRONICS
OPTIVlEW
ONKYO
PHILCO
PRINCETON
PROSCAN
PANASONIC
PHILIPS
ROTEL
RiO
RCA
RAITE
ROWA
SAMPO
SONY
Code
023
043
018034
019
035
015016 0t7 019 022045 060
061062 065066 067068
074
069070
069
018024 032
027
025069 070071
069
069
065
046047 048063 064
069
056
022
015017
020
020
059
063
069070
Brand
LG(Goldstar)
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXTLEVEL
PHILIPS
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
SANYO
THOMSON
TOSHIBA
TECHNICS
TVlEW
TOKAI
TEAC
TEOHWOOD
TREDEX
URBANCONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Code
048049 050
052
053
144
074
105
072
076092 119
044045
046047
023
024034 124 134136 137138
036076
117118
120
023035 074 075131 132
073
038
104
026029 126 127128 129
130141
039041
042
043093
140
062
062
094
090
145
028062 076
139
072
073
096
097
098099 101
076
075
102
032063
040073
103
076 121
SET-TOP BOX
Brand
ALPHASTAR
ANAM
CHANNELMASTER
CROSSDIGITAL
CHAPARRAL
DIRECTTV
DAEWOO
DISHNETWORKSYSTEM
DISHPRO
DRAKE
DXANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERALINSTRUMENT
HTS
HOMECABLE
HITACHI
HUGHESNETWORK
IQ
IQPRISM
JANEIL
JERROID
JVC
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STS
STARTRAK
SKY
SKYLIFE
SHACK
STARCHOICE
SONY
TOSHIBA
ULTIMATETV
UNIDEN
ZENITH
Code
044 073
016 021036038 039040 04I 042
016
064
018
015
047 048064
015016 017021 033036 038039
040 041042067
046 049050063
058 059061062
016
065 066
051 052053065 066
064
057
020 027
026
031
005 006007
064
064
054 060
015 017028029 030072
060 066
016 021037055 056057
024 031068
Continued...
8AMSUNG DVD
Product
DVD
DVDR
BDRecord
VCR COMBO
VCR Record
DHRCOMBO
Code
000001 002
003004
005006
007008 009010011
012
013
Product
HomeTheaterVCR COMBO
HDDRecordCOMBO
TWIN TRAYCOMBO
STBDVDCOMBO
DVDReceiver
AV Receiver
Code
014015016
017
018
019
020
021
8AMSUNG SET-TOP BOX
Product
GroundwaveSTB
SatelliteSTB
CABLESTB
STB DVDCOMBO
SatelliteSTBHDD COMBOStandard
Code
00I 002
003
004
008
009
Product
SatelliteSTB HDDCOMBOPremium
CABLESTB HDDCOMBOStandard
CABLESTB HDDCOMBOPremium
GroundwaveSTB HDDCOMBOStandard
GroundwaveSTB HDDCOMBOPremium
Code
010
01t
012
013
014
identifying Problems
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
....
.........................
! Possibte Solution
Poor sound quality.
No u_ctureor sound
--
_- Fry anoiher channei.
...................... _- Adjust ti_eantenna.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the MUTE button is off.
No sound or sound is too low a[
maximum volume,
First, check the volume of units connected to your TV (digital broadcasting receiver, DVD,
cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.
Picture rolls vertlca y.
Check all connections.
The TV operates erraticatl_
LJnp]ugthe TV fct[ 30 sec0ncis !h?n ![y 0pe[ating it again.
The TV won't turn on.
Remote control matfuncuons
Make sure the wfi!l €,utlet!s wc,rking:
- Replace the remote control batteries.
Clean the upper edge of the remote control(transmission window).
Check the battery terminals.
Press the TV button to put your remote control in the TV mode.
Make sure the remote has batteries.
Digital broadcasting screen prooiem.
The image is too hgh[ or too darK.
The visual quahties of digital channels
vary.
Although the TV caption shows HD
the visual quality is not satisfactory.
Check tha! the i'_" and ":'lends of the batte_ies ale inser!ed c0[rectly_
Please check the digital signal strength and input antenna.
- Adjust the Brightness and Contrast.
Adiuat the F!n? tun!ng: .............................................................................
The visual qualities of digital channets may vary depending on the original production
method(analog or digital).
- If the original production method is digitat: High visual quality program
If the original production method is analog: The digital program displayed on the screen is
originally an analog program which has been converted to digital. The visual quality is of an
SD!Standa[d De[in!ti0n) glade: ............................................................
The HD(High Definition) caption that appears when switching channels or when pressing the
Information button on the remote controI means the selected channel is a digital channel. If
the broadcasting station converts an analog signat into digital and transmits the signal, the
_!isualquality may not b e PedecL
• This
product
uses
parts
ofthesoftware
from
theindependent
JPEG
Group.
• This
product
uses
parts
ofthesoftware
owned
bytheFreetype
Project
(www.freetype.org).
• This
product
uses
some
software
programs
which
aredistributed
under
theGPL/LGPL
license.
Accordingly,
thefollowing
GPL
and
LGPL
software
source
codes
thathave
been
used
inthisproduct
can
beprovided
after
asking
tovdswmanager@samsung.com
GPL
software:
Linux
Kernel,
Busybox,
Binutils
LGPL
software:
Glibc
The GNU General Public License (GPL)
Version 2, ,June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed
Preamble
The licenses for most software are designed to take away your freedom to share and change it By contrast, the GNU General Public License is intended to
guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the
Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom
to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the
software or use pieces of it in new free programs; and th at you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate
to certain responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have You must make sure
that they, too_ receive or can get the source code And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify
the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is
modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will
not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain
patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not
licensed at all
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS
FOR COPYING, DISTRIBUTION
AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of
this General Public License. The "Program", below, refers to any such program or work, and a 'work based on the Program" means either the Program or any
derivative work under copyright law: that is to say a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the term "modification '_) Each licensee is addressed as "you"
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope The act of running the Program is not
restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running
the Program) Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the
absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such
modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files 10carry prominent notices stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be
licensed as a whole at no charge to all third parties under the terms of this License
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most
ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that
you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required 1oprint
an announcement.)
Continued...
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably
considered independent and separate works in themselves, then this License, and its terms, de not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on
the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the irffent is to exercise the right to control the
distribution of derivative or collective works based on the Program.
in addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2
above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on
a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing
source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial
distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all
the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the
executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form)
with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the
executable.
if distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code
from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy_ modify.
sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or
rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program
or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work
based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program
or works based on it
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy,
distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients exercise of the rights
granted herein. You are not responsible for enforcing compliance by third parties to this License
7. If, as a consequence of a court judgment or aflegafion of patent infringemerrt or for any other reason (not limited to patent issues), conditions are imposed on
you (whether by court order, agreement or otherwise) that contradict the conditions of this License they do not excuse you from the conditions of this License.
if you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may
not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.
if any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as
a whole is intended to apply in other circumstances.
it is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has
the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/
donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who
places the Program under this License may add an explicit geographical distribution limitation excluding those countries_ so that distribution is permitted only in
or among countries not thus excluded, in such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time Such new versions will be similar in
spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you
have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program
does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.
Condnued...
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission.
For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our
decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED
BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF
THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILLANY COPYRIGHT HOLDER, OR ANY OTHER PARTY
WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT
LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE
PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
END OF TERMS AND CONDITIONS
HOW to Apply These Terms to Your New Programs
if you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which
everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of
warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
One line to give the program's name and a brief idea of what it does.
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple
Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
if the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type "show w'. This is
free software, and you are welcome to redistribute it under certain conditions; type "show c' for details
The hypothetical commands "show w' and "show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be
called something other than "show w' and "show c'; they could even be mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any. to sign a "copyright disclaimer" for the program, if necessary Here is a
sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program "Gnomovision (which makes passes at compilers) written by James Hacker
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it
more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this
License.
Condnued...
GNU Lesser General Public License (LGPL)
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation_ inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and
distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version
number 2 1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it By contrast, the GNU General Public Licenses are intended to
guarantee your freedom to share and change free software--to make sure the software is free for all its users.
This license, the Lesser General Public License_ applies to some specially designated software packages--typically libraries--of the Free Software Foundation
and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public
License is the better strategy to use in any particular case, based on the explanations below
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licensee are designed to make sure that you have the
freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can
change the software and use pieces of it in new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions
translate to certain responsibilifies for you if you distribute copies of the library or if you modify it
For example, if you distribute copies of the library,whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure
that they, too, receive or can get the source code If you link other code with the library, you must provide complete object files to the recipients, so that they can
relink them with the library after making changes to the libraryand recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute
and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed
on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might
be introduced by others
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users
of a free program by obtaining a restrictive license from a patent holder Therefore, we insist that any patent license obtained for a version of the library must be
consistent with the full freedom of use specified in this license
Most GNU software, includingsome libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License,
applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit
linking those libraries into non-free programs
When a program is linked with a library,whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative
of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom The Lesser
General Public License permits more lax criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also
provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary
General Public License for many libraries However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard.
To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free
libraries In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License
in other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software For
example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant,
the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has
the freedom and the wherewithal to run that program using a modified version of the Library
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library"
and a "work that uses the library" The former contains code derived from the library, whereas the latter must be combined with the library in order to run
TERMS AND CONDITIONS
FOR COPYING, DISTRIBUTION
AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party
saying it may be distributed under the terms of this Lesser General Public License (also called "this License") Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those
functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been distributed under these terms. A 'work based on the Library" means either the
Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or
translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".)
Continued...
"Source code" for a work means the preferred form of the work for making modifications to it For a library, complete source code means all the source code for
all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope The act of running a program using the
Library is not restdcted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the
Library in a tool for writing it) Whether that is true depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the
absence of any warranty; and distribute a copy of this License along with the Library
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or
work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as
an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such
function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore,
Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the
square root function must still compute square roots.)
These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Library, and can be reasonably
considered independent and separate works in themselves then this License and its terms, do not apply to those sections when you distribute them as
separate works But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on
the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control
the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter
all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version
than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change
in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and
derivative works made from that copy
This option is useful when you wish to copy part of the code of the Library into a program that is not a library
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) fn object code or executable form under the terms of Sections 1 and
2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange.
if distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same
place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work
that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.
However, linking a 'work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of
the Library), rather than a "work that uses the library" The executable is therefore covered by this License. Section 6 states terms for distribution of such
executablee
When a 'work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the
Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a
library. The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in
length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work (Executables containing this object code plus portions
of the Library will still fall under Section 6.)
Condnued...
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6 Any executables containing that
work also fall under Section 6, whether or net they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also combine or link a 'work that uses the Library" with the Library to produce a work containing portions of
the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse
engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must
supply a copy of this License If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well
as a reference directing the user to the copy of this License Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work
(which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable
"work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library win not necessarily be able to
recompile the application to use the modified definitions)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already
present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the
library, if the user installs one_ as long as the modified version is interface-compatible with the version that the work was made with
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a
charge no more than the cost of performing this distribution
d) if distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from
the same place
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the 'work that uses the Library" must include any data and utility programs needed for reproducing the executable
from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form)
with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the
executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such
a contradiction means you cannot use both them and the Library together in an executable that you distribute.
7. You may place library facilifies that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this
License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is
otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilifies. This must be distributed
under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying
uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy,
modify sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received
copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or
its derivative works These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based
on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works
based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy,
distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients exercise of the
rights granted herein You are not responsible for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on
you (whether by court order, agreement or otherwise) that contradict the conditions of this License they do not excuse you from the conditions of this License.
if you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may
not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly
or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section
as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has
the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/
donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice
Condnued...
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who
places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or
among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be
similar in spirit to the present version, but may differ in detail to address new problems or concerns
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you
have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does
not specify a license version number, you may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask
for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for
this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of
software generally.
NO WARRANTY
15. BECAUSE
APPLICABLE
'AS
THE LIBRARY
LAW. EXCEPT
IS" WITHOUT
WARRANTY
MERCHANTABILITY
WITH
WHO MAY MODIFY
OF ANY KIND,
AND FITNESS
YOU. SHOULD
16. IN NO EVENT
IS LICENSED
FREE
WHEN OTHERWISE
THE LIBRARY
UNLESS
AND/OR
EITHER
PROVE
REQUIRED
OR IMPMED,
INCLUDING,
THE ENTIRE
RISK AS TO THE
BY APPLICABLE
WITH ANY OTHER
YOU ASSUME
DAMAGES
RENDERED
THE
LAW OR AGREED
THE LIBRARY
SOFTWARE),
FOR THE LIBRARY, TO THE EXTENT PERMITTED
BY
HOLDERS AND/OR
OTHER PARTIES PROVIDE THE LIBRARY
PURPOSE.
DEFECTIVE,
REDISTRIBUTE
IS NO WARRANTY
THE COPYRIGHT
EXPRESSED
FOR A PARTICULAR
SPECIAL, INCIDENTAL
OR CONSEQUENTIAL
LIMITED TO LOSS OF DATA OR DATA BEING
LIBRARY TO OPERATE
SUCH DAMAGES.
OF CHARGE, THERE
STATED iN WRITING
COST
ABOVE,
QUALITY
OF ALL NECESSARY
TO IN WRITING
AS PERMITTED
BUT NOT LIMITED
WILLANY
BE LIABLE
AND
PERFORMANCE
SERVICING,
COPYRIGHT
TO YOU
TO, THE IMPLIED
REPAIR
HOLDER,
FOR DAMAGES,
WARRANTIES
OF THE
OF
LIBRARY
IS
OR CORRECTION.
OR ANY OTHER
INCLUDING
PARTY
ANY GENERAL,
ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY
(INCLUDING
BUT NOT
INACCURATE
OR LOSSES SUSTAINED
BY YOU OR THIRD PARTIES OR A FAILURE OF THE
EVEN
IF SUCH
HOLDER
OR OTHER
PARTY
HAS BEEN ADVISED
OF THE
POSSIBILITY
OF
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
if you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making itfree software that everyone can
redistribute and change You can do so by permitting redistribution under these terms (or alternatively, under the terms of the ordinary General Public License)
To apply these terms attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion
of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
<one line to give the library's name and an idea of what it does.> Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free
Software Foundation; either version 2 1 of the License, or (at your option) any later version
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, inc., 59
Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any. to sign a "copyright disclaimer" for the library, if necessary. Here is a
sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library "Frob' (a library for tweaking knobs) written by James Random Hacker.
signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice
That's all there is to it!
Specifications
Sc_oe.
s_o(D_agona_)
.......................................................................................
30!nob
................................................................
.................................................
27!n_h
....................................
Sound Output
10W+ 10W
Dirnensions (WxHxD)
Body
wo_ght
159 inches/
1&3inches/
934x568x406mm 796x586x415mm
18.3inches/
185 inches/
183 inches/
910x570x415mm 771x593x420mm 796x586x415mm
......
......
OperatingTemperature
Environmental OperatingHumidity
50 °F to 104°F (10°C to 40 °C)
10%to 80%,non-condensing
Conside!a!ions
-4 °Fto 113°F (-20°C to 45 °C)
StorageTemperature
_1, Design and specifications are subject to change without prior notice.
_, For the power supply, refer to the label attached to the product.
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
CANADA
U.S.A
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
1-800-SAMSUNG (7267864)
www.samsung.com/ca
1-800-SAMSUNG (7267864)
www.samsung.com
Samsung Electronique Canada Inc. Service & la Clientele
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
AA68-03782G-00