advertisement
QuickSpecs
Overview
HP ProLiant BL490c Generation 7 (G7) Server Blade
1.
2.
Access Panel
Internal USB connector
3.
Internal SD card slot
4.
Two (2) mezzanine I/O expansion slots
HP ProLiant BL490c G7 Server Blade
5.
Embedded Dual Port FlexFabric 10GbE Converged Network
Adapter
6.
Up to two (2) Intel® Xeon® 5600 or 5500 series processors
NOTE: SSD Drives placed on baffle above processors; See storage illustration for more details.
7.
Local I/O connector
8.
Eighteen (18) DDR3 DIMM Memory Slots
DA - 13711 North America — Version 16 — September 24, 2012 Page 1
QuickSpecs
Overview
HP ProLiant BL490c Generation 7 (G7) Server Blade
What's New
Support for HP BLc NC360m NIC Adapter Opt Kit
At A Glance
The HP ProLiant BL490c G7 Virtualization Blade raises the bar for memory capacity and I/O bandwidth in a half-height blade. Coupling up to 2 Intel® Xeon® processors with 18 DIMM slots and support for up to 24 NICs, the BL490c G7 gives enterprise data center managers the ideal server platform for hosting virtual machines.
This document covers the HP ProLiant BL490c G7 server blade only. For more information on HP BladeSystems c-Class Enclosure and
HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_na/12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_na/12810_na.html
HP BladeSystem c-Class Interconnect and Mezzanine Components: http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
The HP ProLiant BL490c G7 is a 2-processor server blade optimized for virtualization with high memory capacity and high bandwidth and flexible networking.
HP ProLiant BL490c G7 server blade includes:
Processor:
Up to two (2) Intel® Xeon® 5600 Series processors
Intel® 5520 Chipset
Memory:
Eighteen (18) DIMM slots
Up to 384GB, using PC3-10600R DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated at 2
DIMMs per Channel in 12 of the 18 slots
Up to 48GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully populated at 2
DIMMs per Channel in 12of the18 slots
Storage Controller:
HP Embedded SATA RAID Controller
NOTE: This is a chipset SATA RAID controller. It supports RAID 0 and 1 only and no Battery Backed Write Cache. User needs to enable the RAID option through HP RBSU (ROM Base Setup Utility) first before the RAID can be activated. Users also need to download the OS driver from: http://www.hp.com/support/BL490cG7 for OS Array Monitoring.
NOTE: HW RAID functionality requires the use of an optional Smart Array mezzanine card. See the Storage Controller options section below.
Internal Drive Support:
Up to two (2) non-hot plug SATA Solid State Drives (SSD)
With an attached D2200sbStorage Blade, up to six (12) hot plug SFF Serial Attached SCSI (SAS) or SATA Hard Drives
(optional)
DA - 13711 North America — Version 16 — September 24, 2012 Page 2
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Overview
Network Controller:
Integrated NC553i Dual Port FlexFabric 10GbE Adapter supporting stateless TCP/IP offload, TCP Offload Engine (TOE),
Fibre Channel over Ethernet (FCoE) and iSCSI protocols
NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric 10Gb/24-port
Module. Learn more at: www.hp.com/go/virtualconnect .
NOTE: Each port is autosensing 1 Gb / 10 Gb, and can interoperate with 1 Gb HP BladeSystem c-Class interconnect components. Both ports will operate at the same speed.
One (1) additional 10/100 server adapter dedicated to iLO 3 Management
Mezzanine Support:
Two (2) I/O expansion mezzanine slots
Supports up to two (2) mezzanine cards
Dual Port FlexFabric Adapter mezzanine option
Dual-Port Fibre Channel Mezzanine options for SAN connectivity (Choice of Emulex ,QLogic or Brocade) iSCSI Ethernet mezzanine option for optimized iSCSI connectivity
Ethernet server adapter mezzanine options for additional network ports
InfiniBand (IB) Mezzanine options for low latency and high bandwidth server interconnectivity
Storage Controller mezzanine options for additional internal and external storage connectivity
I/O Accelerator mezzanine options for high transaction rate local storage
SAS mezzanine option for external direct attach and shared SAS storage
Internal USB Support:
One (1) internal USB 2.0 connector for security key devices and USB drive keys
One (1) internal SD-HC Card slot
Trusted Platform Module:
One (1) internal TPM 1.2 module connector
Form Factor:
HP ProLiant BL490c G7 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures
Infrastructure Management:
This server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades
Firmware Maintenance website at: http://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html
HP Integrated Lights-Out 3 (iLO 3) management processor for simplified server setup, health monitoring and recovery, power and thermal control, and lights-out remote administration.
HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple management console. Insight Control supports both Windows and Linux-based central management servers.
HP Matrix Operating Environment, a product option, is an integrated command center that enables IT Staff personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's changing business requirements
Operating Systems:
Supports Windows, RHEL, SLES, Solaris, VMware, and Citrix XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport
Enclosures:
HP offers two different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 16 ProLiant BL490c G7 servers plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 8 HP ProLiant BL490c G7 servers plugged horizontally.
DA - 13711 North America — Version 16 — September 24, 2012 Page 3
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Overview
Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard Administrator modules are all designed to fit into the c3000 and c7000 enclosures.
For additional enclosure information, please see: http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html
.
NOTE: For optimal cooling and system performance the BL490c G7 requires the c7000 enclosure to be configured with 10 fans and the c3000 enclosure to be configured with 6 fans.
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of purchase.
Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Certain restrictions and exclusions apply.
Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs for details.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a
Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity.
Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13711 North America — Version 16 — September 24, 2012 Page 4
QuickSpecs
Standard Features
HP ProLiant BL490c Generation 7 (G7) Server Blade
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
Processor
One of the following depending on Model
Six Core Processors
Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor
Intel® Xeon® X5670 (2.93GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor
Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor
Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W, DDR3-1333, HT, Turbo 1/1/1/1/2/2) Processor
Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W, DDR3-1333, HT, Turbo 2/2/3/3/4/4) Processor
Four Core Processors
Intel® Xeon® X5672 (3.20GHz/4-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/3/3) Processor
Intel® Xeon® L5630 (2.13GHz/4-core/12MB/40W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost
Technology, with 4, 3, 2, and 1 cores active on four core 5600 series processors or with 6,5,4,3,2,1 cores active on six core 5600 series processors.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5600 Series, the letter preceding the model number indicates the performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise
Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
Upgradeability
Upgradeable to two (2) processors
Cache Memory
Chipset
12MB shared L3 cache
Intel® 5520 Chipset
DA - 13711 North America — Version 16 — September 24, 2012 Page 5
QuickSpecs
Standard Features
Memory
HP ProLiant BL490c Generation 7 (G7) Server Blade
Type
Standard
Maximum (RDIMM)
DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
6 GB (3 x 2GB) RDIMM and 12GB (3 x 4GB) RDIMM
384 GB (12 x 32 GB) for Registered Memory configurations
Maximum (UDIMM) 48 GB (12 x 4 GB) for Unbuffered Memory configurations
NOTE: A minimum of 2GB of memory must be installed.
NOTE: Depending on the memory configuration and processor model the memory speed may run at
1333MHz, 1066MHz or 800MHz. Please see the Online Memory Configuration Tool for details; www.hp.com/go/ddr3memory-configurator
DDR3 memory options part number decoder
Memory Protection
Network Controller
Advanced ECC (multi-bit error protection)
Memory Mirroring Mode
Memory Lock-Step Mode
Memory Online Spare Mode supported on Xeon 5600 Series processors
Integrated NC553i Dual Port FlexFabric 10Gb Adapter
NOTE: FlexFabric capability requires the use of an HP Virtual Connect Flex-Fabric module. Learn more at: www.hp.com/go/virtualconnect .
NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric
10Gb/24-port Module. Learn more at: www.hp.com/go/virtualconnect .
One (1) additional 10/100 NIC dedicated to iLO 3 Management
Two (2) I/O expansion mezzanine slots (x8 PCI Express)
I/O Expansion Slots
Integrated Manageability HP Integrated Lights-Out 3 (iLO 3) management processor
DA - 13711 North America — Version 16 — September 24, 2012 Page 6
QuickSpecs
Standard Features
Storage Controller
HP ProLiant BL490c Generation 7 (G7) Server Blade
HP Embedded SATA RAID Controller
NOTE: This is a chipset SATA RAID controller. It supports RAID 0 and 1 only and no Battery Backed Write
Cache. User needs to enable the RAID option through HP RBSU (ROM Base Setup Utility) first before the
RAID can be activated. Users also need to download the OS driver from: http://www.hp.com/support/BL490cG7 for OS Array Monitoring.
NOTE: HW RAID functionality requires the use of an optional Smart Array mezzanine card. See the Storage
Controller options section below.
Maximum Internal
Storage
One of the following depending on Model
Graphics
Non-Hot Plug SATA SSD 800GB 2 x 400GB
NOTE: Hot Plug SFF SAS maximum internal storage supported with optional D2200sb Storage Blade attached.
Integrated Matrox G200
Resolution Color Depths 1600 x 1200, 64K, 256, 16
1280 x 1024, 16.7M, 64k, 256, 16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
NOTE: Maximum resolution available via HP Integrated Lights-Out 3 (iLO 3) remote console is 1280 x 1024.
Fibre Channel Support
Two (2) optional Fibre Channel HBAs are supported by the HP ProLiant BL490c G7. Both mezzanine circuit boards connect directly to the server blade system board. These Fibre Channel HBAs are available via option kits and must be ordered separately.
HBA mezzanine card option kits:
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 403621-B21)
Based on the same field-proven ASIC, firmware, and driver technology as Emulex's renowned
LPe1150 HBA, the Emulex LPe1105-HP is fully driver compatible with all Emulex HBAs
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 456972-B21)
Exceptional performance, enhanced security, and scalable management for virtual server and enterprise-class applications
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 403619-B21)
Uses common drivers which means that customers can standardize on one QLogic driver whether they are using the QMH2462 or other HBAs powered by QLogic
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 451871-B21)
Provides a first step into the 8Gb future, advanced, embedded support for virtualized environments and reduced power consumption
HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter (PN 590647-B21)
DA - 13711 North America — Version 16 — September 24, 2012 Page 7
QuickSpecs
Standard Features
HP ProLiant BL490c Generation 7 (G7) Server Blade
Application oriented Quality of Service (AQoS) providing the ability to configure, prioritize, and optimize traffic flows from virtual machines and/or applications to the target port
Brocade, Emulex and QLogic Fibre Channel HBAs for HP BladeSystem c-Class feature:
Optimal performance utilizing PCI Express
4/2/1Gb/s auto negotiating speeds (4Gb HBAs)
8/4/2Gb/s auto negotiation speeds (8Gb HBAs)
Dual-ports for redundant path connections
Up to two FC HBAs per server blade providing redundant FC HBA support
Optimized for HP Storage and supported by third party SAN vendors
Support for Microsoft® Windows® and Linux operating system environments
Compatible SAN
HP ProLiant BL490c G7 server blades are optimized for HP MSA, EVA and XP
HP ProLiant BL490c G7 server blades are compatible with select 3rd party SANs (please see blade storage page for more details: http://h18004.www1.hp.com/products/blades/components/c-class-sans.html
HP Virtual Connect
HP Virtual Connect is an interconnect option for BladeSystem c-Class that simplifies server connectivity to data and storage networks, and reduces costs. Unique HP Flex-10 and FlexFabric technologies make maximum use of network bandwidths, provide dynamic tuning and enable extreme flexibility to meet individual server and infrastructure requirements. HP Virtual Connect Enterprise Manager (VCEM) provides a central console to administer network connections and workloads for thousands of servers. For more information on Virtual Connect Ethernet, Fibre Channel, Converged Network and management options see: www.hp.com/go/virtualconnect
HP Insight management software
HP Service Pack for
ProLiant
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM) version 5 provide a new, comprehensive approach to firmware and system software maintenance. Together they provide better operating stability and ensure maximum uptime. The SPP will be updated at a predictable cadence, typically coinciding with new HP server hardware launches. By enabling firmware to be updated online and integrating firmware and system software updates in one operation HP SUM and the SPP offer faster updates of individual servers and dramatically faster updates of entire BladeSystem enclosures. Further improving system uptime and stability is the fact that HP provides 12 months of support on each Service Pack for ProLiant.
The user experience around HP SUM and the SPP has been improved in several ways, starting with the web download. A single web page provides access to a single download containing both the latest version of HP SUM version 5 and the latest SPP. Optional smaller subsets with only specific types of servers or specific operating systems are offered to save on download time. The HP SUM application has been re-written to provide a more straightforward, intuitive user interface that guides the user through the steps of discovery, analyses and update, providing comprehensive information on available updates, criticality and interdependencies. This information is also available in reports.
By providing the option of multiple local or shared repositories which can be easily updated from hp.com, HP SUM provides the tools to optimize stability
DA - 13711 North America — Version 16 — September 24, 2012 Page 8
QuickSpecs
Standard Features
HP ProLiant BL490c Generation 7 (G7) Server Blade
and consistency throughout the company. While HP SUM and the SPP will recommend the combinations of firmware and system software that HP has found to be the best practice, the application gives customers the flexibility to set their own specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific attention for interaction between firmware, drivers and agents both within the server as well as in interaction with the BladeSystem enclosure components
(Onboard Administrator and Virtual Connect). This testing ensures the highest quality as well as providing the input for HP SUM to deploy updates taking into account all interdepencies, when determining the correct updates and order of update deployment.
HP Insight Foundation
The Service Pack for ProLiant (which includes HP SUM 5) can be downloaded from www.hp.com/go/spp/download . More information can be found: www.hp.com/go/spp and http://www.hp.com/go/hpsum
Insight Foundation is being baselined at version v8.70 which means the following:
Its Media Kit (contains 2 SmartStart CDs, the Firmware DVD, and the
Management DVD) will continue to ship with all supported ProLiant G7 or earlier BTO servers until the last supported server is no longer shipping.
The Media Kit will not be updated past version 8.70.
ProLiant G7 or earlier CTO servers are able to order the Media Kit with the understanding that the media is not updated. Please check specific server QuickSpecs for availability of CTO Kit.
PSP and Firmware DVD downloads will be updated through 2Q 2012 at the HP Insight Foundation Suite for ProLiant downloads tab: http://www.hp.com/go/foundation
Customers are urged to use the replacement product, HP Service Pack for
ProLiant, instead of Insight Foundation Suite which is found at these location: www.hp.com/go/spp www.hp.com/go/spp/download
HP Integrated Lights-Out HP Integrated Lights-Out (iLO) simplifies server setup, health monitoring, power and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP iLO functions without additional software and can be accessed from any location via a web browser. HP iLO works hand-in-hand with HP Systems Insight Manager, Insight Control suites, and HP Matrix
Operating Environment, helping customers unleash the value of the ProLiant platform and deliver the highest possible quality of IT service. For more information, visit: www.hp.com/go/iLO
HP Insight Control HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console.
Two versions of Insight Control are available, to serve environments requiring either a Linux-based or a Windows-based central management server: HP
DA - 13711 North America — Version 16 — September 24, 2012 Page 9
QuickSpecs
Standard Features
High Performance
Clusters
HP ProLiant BL490c Generation 7 (G7) Server Blade
HP Matrix Operating
Environment
Insight Control for Linux, and HP Insight Control. See www.hp.com/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight .
The HP Matrix Operating Environment (Matrix OE) for ProLiant and Integrity servers is an integrated command center that helps you instantly adjust to dynamic business demands. This advanced infrastructure management software lets you reduce the cost of common data center tasks by up to 40 percent while keeping pace with your changing business.
The HP Matrix OE includes the automated provisioning, optimization, and recovery management capabilities for HP CloudSystem Matrix, the ideal platform for private cloud and Infrastructure as a Service (IaaS).
NOTE: For more information, visit: http://www.hp.com/go/matrixoe
HP Cluster Platforms
HP HPC Interconnects
HP Insight Cluster
Management Utility
HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software. Operating system options include specially priced offerings for Red Hat Enterprise Linux and SUSE Linux
Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster
Platform Configurator simplifies ordering. http://www.hp.com/go/clusters
High Performance Computing (HPC) interconnect technologies are available for this server as part of the HP Cluster Platform portfolio. These high-speed
InfiniBand and Gigabit interconnects are fully supported by HP when integrated within an HP cluster. Flexible, validated solutions can be defined with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Insight Cluster Management Utility (CMU) is an HP-licensed and HPsupported suite of tools that are used for lifecycle management of hyperscale clusters of Linux ProLiant systems. CMU includes software for the centralized provisioning, management and monitoring of nodes. CMU makes the administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
HP HPC Linux Value Pack HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HP-supported option to HP Insight CMU, for the development and deployment of applications on HPC Cluster Platforms. Value Pack includes the Platform LSF workload scheduler and Platform Application Center, as well as the HP-MPI parallelization library. HP HPC Linux Value Pack
DA - 13711 North America — Version 16 — September 24, 2012 Page 10
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Standard Features
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Solaris
VMware
Citrix XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, including how to purchase from
HP, please visit our OS Support at: http://www.hp.com/go/ossupport
Availability
Industry Standard
Compliance
Security
Dual-port embedded 10 Gigabit adapters for redundant network connections
Two (2) non hot-plug SATA SSD with integrated chipset RAID
Redundant ROM
Advanced ECC Memory
Support for Memory Mirroring Mode and Memory Lock-Step Mode
Support for Memory Online Spare Mode with Xeon 5600 Series processors
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing)
ACPI V2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
IMPI 2.0 Compliant
SMASH CLP Compliant
Power-on password
Administrator's password
Integrated Lights-Out 3 with:
12 customizable user accounts
SSL encryption
Secure Shell version 2
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser,
CLP and XML scripting interface
AES and RC4 encryption of video
Disable via a global setting
Keyboard password
External USB port enable/disable
Network server mode
Serial interface control
TPM (Trusted Platform Module) 1.2 option
DA - 13711 North America — Version 16 — September 24, 2012 Page 11
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Standard Features
Factory Express Portfolio for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services on your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express .
HP Simple Configurator
SCE is a guided self service tool to help sales and non technical people provide customers with initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require "custom" rack configuration or configuration for products not available in SCE, please contact HP's Customer Business Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator
DA - 13711 North America — Version 16 — September 24, 2012 Page 12
QuickSpecs
Service and Support
Service and Support
HP ProLiant BL490c Generation 7 (G7) Server Blade
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.
What HP ProLiant and BladeSystem Services can do for you
HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support, and manage
IT and infrastructure solutions. This way, HP proposes services solutions that include more than just uplift of base warranty. You can get the support you need by choosing from one of a number of service packaged solutions we have designed to address wider set of customer support needs.
HP Technology Services meets business challenges with services offered in three packages -
Optimized Care Package, Standard Care Package, and Basic Care Package - available for each product group. Such packaged solutions enable customers to optimize technology operations, minimize risk and drive better business outcomes with easy-to-buy, easy-to-use scalable support packages for servers, storage, networking and software.
Optimized Care Package Supports maintaining servers at optimum performance availability
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000 enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and VPM http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW.pdf
3-Year HP Critical Advantage L3 for c3000/c7000 enclosure + 3-Year HP Critical Advantage L3 for
Blade server
Provides end-to-end infrastructure support solution for business critical applications running on virtualized/x86 infrastructures, enabling the customers to cost effectively build, operate, and continuously improve their IT environment http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA3-1772ENW.pdf
HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network
HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to facilitate proper implementation of network protocols and access to advanced features.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW.pdf
Additional Services: Virtualization Services - Strategy, Design, Transition, Operation, Continual Service
Improvement.
DA - 13711 North America — Version 16 — September 24, 2012 Page 13
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Service and Support
Standard Care Package Package that maintains high level of server availability
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000 enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and VPM http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW.pdf
HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network
HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to facilitate proper implementation of network protocols and access to advanced features http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW.pdf
3-Year, HP 6 hour Hardware Support Onsite Call-to-Repair Service for c3000/c7000 enclosure + 3-
Year, HP 6 hour Hardware Support Onsite Call-to-Repair Service for Blade server
Provides an IT manager with a team of support specialists who will quickly begin troubleshooting the system to help return the hardware to operating condition within 6 hours of the initial service request to the HP Global Solution Center http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EN.pdf
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL series servers or HP BladeSystem servers http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
1-Year HP Proactive Select 30 Credit
Provides a flexible way to purchase HP best-in-class consultancy and technical services http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA2-3842ENN.pdf
Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat) & VMware Installation & Start Up and
Software Support); Microsoft or Linux or VMware education courses; +60 Proactive Select Credits, Factory
Express.
DA - 13711 North America — Version 16 — September 24, 2012 Page 14
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Service and Support
Basic Care Package Delivers minimum recommended support service level
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000 enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and VPM http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW.pdf
3-Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for c3000/c7000 enclosure + 3-
Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for Blade server
Provides you with rapid remote support and if required an HP authorized representative who will arrive on site any time and day of the year to begin hardware maintenance service within 4 hours of the service request being logged http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL series servers or HP BladeSystem servers http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
1-Year HP Proactive Select 10 Credit
Provides a flexible way to purchase HP best-in-class consultancy and technical services http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA2-3842ENN.pdf
Additional Services: Startup Blade System c-Cass Enhanced Network Service; Software OS (Microsoft,
Linux (SUSE/Red Hat) & VMware Installation & Start Up and Software Support); +30 Proactive Select
Credits, Factory Express
Insight Remote Support
The packages include HP Insight Remote Support that uses proven technology to deliver secure, reliable
24x7 remote monitoring, diagnoses, and problem resolution. It is available at no additional cost to all warranty, HP Care Pack Service, and service agreement customers.
For more information
To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales representative or HP Authorized Channel Partner. Or visit: www.hp.com/services/bladesystem
DA - 13711 North America — Version 16 — September 24, 2012 Page 15
QuickSpecs
Models
HP ProLiant BL490c Generation 7 (G7) Server Blade
Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
HP ProLiant BL490c G7
X5675 1P 12GB-R Server
637392-B21
HP ProLiant BL490c G7
X5670 1P 12GB-R Emb
SATA Server
603599-B21
HP ProLiant BL490c G7
X5650 1P 6GB-R Emb
SATA Server
603602-B21
Processor(s)
One of the following depending on Model
Cache Memory
Memory
One of the following depending on Model
Network Adapter
(1) Intel® Xeon® Processor X5675 (3.06GHz/6-core/12MB/95W, DDR3-1333,
HT, Turbo 2/2/2/2/3/3)
(1) Intel ® Xeon® Processor X5670 (2.93GHz/6-core/12MB/95W, DDR3-1333,
HT, Turbo 2/2/2/2/3/3)
(1) Intel® Xeon® Processor X5650 (2.66GHz/6-core/12MB/95W, DDR3-1333,
HT, Turbo, 2/2/2/2/3/3)
(1) Intel® Xeon® Processor L5630 (2.13GHz/4-core/12MB/40W, DDR3-1066,
HT, Turbo, 1/1/2/2)
(1) Intel® Xeon® Processor E5649 (2.53GHz/6-core/12MB/80W, DDR3-1333,
HT, Turbo1/1/1/1/2/2)
12MB
HP ProLiant BL490c G7
L5630 1P 12GB-L Emb
SATA Server
603605-B21
Storage Controller
Hard Drives
12 GB (3 x 4 GB) PC3-10600 (DDR3-1333) Registered DIMMs
6 GB (3 x 2 GB) PC3-10600 (DDR3-1333) Registered DIMMs
12GB (3 x 4 GB) PC3L-10600 (DDR3-1333) Low Voltage Registered DIMMs
Embedded NC553i Dual Port FlexFabric 10GbE Adapter and one (1) additional
10/100 server adapter dedicated to iLO 3 Management
HP Embedded SATA chipset RAID
None ship standard
HP ProLiant BL490c G7
E5649 1P 6GB-R Server
637615-B21
Internal Storage
Optical Drive
Power Supply
Form Factor
SSD: Up to 800GB (2 x 400GB) SATA, Maximum
None
None
Up to eight (8) half-height blades supported in the HP BladeSystem c3000
Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem c7000
Enclosure
DA - 13711 North America — Version 16 — September 24, 2012 Page 16
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order server blades must start with a CTO Blade.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models HP ProLiant BL490c G7 Configure-to-order Server
Configurable Model ships with:
Integrated NC553i Dual Port FlexFabric 10Gb Adapter and one (1) additional 10/100 server adapter dedicated to iLO 3 management
Integrated Lights-Out 3 Standard Blade Edition
603719-B21
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HP Processors For single processor configuration choose:
NOTE: If two processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
HP Memory
Six-Core Processor Option Kits
HP BL490c G7 Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W) FIO Processor Kit
HP BL490c G7 Intel® Xeon® X5670 (2.93GHz/6-core/12MB/95W) FIO Processor Kit
HP BL490c G7 Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W) FIO Processor Kit
HP BL490c G7 Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W) FIO Processor Kit
HP BL490c G7 Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W) FIO Processor Kit
Four-Core Processor Option Kits
HP BL490c G7 Intel® Xeon® X5672 (3.20GHz/4-core/12MB/95W) FIO Processor Kit
HP BL490c G7 Intel® Xeon® L5630 (2.13GHz/4-core/12MB/40W) FIO Processor Kit
Registered DIMMS (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power
Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power
Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP
Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit
637437-L21
603600-L21
603603-L21
637441-L21
612892-L21
637439-L21
603606-L21
500656-B21
500658-B21
593339-B21
604504-B21
500662-B21
604506-B21
627812-B21
500666-B21
DA - 13711 North America — Version 16 — September 24, 2012 Page 17
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Configuration Information - Factory Integrated Models
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP Memory
Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration
Tool: www.hp.com/go/ddr3memory-configurator .
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant
Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient .
NOTE: PC3L is a low voltage memory.
627814-B21
500668-B21
500670-B21
500672-B21
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional options, including server blade enclosures interconnect and mezzanine options and power subsystem options; please see the Core Options and
Additional Options sections below; or the following:
HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_na/12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_na/12810_na.html
and HP BladeSystem c-Class Interconnect and Mezzanine Components: http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
DA - 13711 North America — Version 16 — September 24, 2012 Page 18
QuickSpecs
Core Options
HP ProLiant BL490c Generation 7 (G7) Server Blade
NOTE: Some options may not be available for factory integration. Please contact an HP sales representative for additional information.
HP Ethernet Mezzanine
Options
Gigabit Ethernet Mezzanines
HP NC325m PCI Express Quad Port Gigabit Server Adapter
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on 2 of the 4 ports.
HP NC360m Dual Port 1GbE BL-c Adapter
416585-B21
445978-B21
447883-B21 HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on only 2 of the 4 ports.
HP NC382m PCI Express Dual Port Multifunction Gigabit Server Adapter 453246-B21
NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000 Mbps, full duplex per port only. For more information, see the "Network Controller" segment in the Standards Features section.
10 Gigabit Ethernet Mezzanines
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade connecting to a
10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP
BladeSystem c3000 Enclosure).
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server memory.
NOTE: Each 10 Gigabit Either adapter supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.
NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring of a
FlexFabric Adapter to any of the supported protocols. For example iSCSI to FCoE (Fibre
Channel over Ethernet). Note that a HP Virtual Connect profile takes precedence over the setting in this menu. Also, some FlexFabric Adapters may require that network boot be enabled in order to configure the protocol. If the protocol is configured without enabling network boot with certain FlexFabric Adapters, the protocol may not take effect. Once the protocol has taken effect on the first boot after configuring this option, network boot may be disabled if desired.
HP NC532m Dual Port 10GbE Multifunction BL-c Adapter
HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
HP NC553m 10Gb 2-port FlexFabric Adapter
467799-B21
539857-B21
610609-B21
613431-B21
HP Fibre Channel
Mezzanine Options
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter
456972-B21
403621-B21
451871-B21
403619-B21
590647-B21
DA - 13711 North America — Version 16 — September 24, 2012 Page 19
QuickSpecs
Core Options
HP Processors
HP ProLiant BL490c Generation 7 (G7) Server Blade
Six-Core Processors
HP BL490c G7 Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W) Processor Kit
HP BL490c G7 Intel® Xeon® X5670 (2.93GHz/6-core/12MB/95W) Processor Kit
HP BL490c G7 Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W) Processor Kit
HP BL490c G7 Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W) Processor Kit
HP BL490c G7 Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W) Processor Kit
Four-Core Processors
HP BL490c G7 Intel® Xeon® X5672 (3.20GHz/4-core/12MB/95W) Processor Kit
HP BL490c G7 Intel® Xeon® L5630 (2.13GHz/4-core/12MB/40W) Processor Kit
NOTE: When upgrading or ordering spares for CPU 1, reuse the heatsink that was originally shipped with CPU 1 and ensure sufficient thermal grease is applied.
637437-B21
603600-B21
603603-B21
637441-B21
612892-B21
637439-B21
603606-B21
HP Memory Registered DIMMs (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power
Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power
Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP
Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP Memory
Kit
Unbuffered with ECC (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration
Tool: www.hp.com/go/ddr3memory-configurator .
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant
Energy Efficient Features, see: http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
NOTE: PC3L is a low voltage memory.
500656-B21
500658-B21
593339-B21
604504-B21
500662-B21
604506-B21
627812-B21
500666-B21
627814-B21
500668-B21
500670-B21
500672-B21
DA - 13711 North America — Version 16 — September 24, 2012 Page 20
QuickSpecs
Core Options
HP Hard Drives
HP ProLiant BL490c Generation 7 (G7) Server Blade
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SATA Non-hot Plug 2.5" Enterprise Mainstream Solid State Drives
HP 400GB 3G SATA MLC SFF (2.5-inch) Non-hot plug Enterprise Mainstream 3yr Wty
Solid State Drive
HP 200GB 3G SATA MLC SFF (2.5-inch) Non-hot plug Enterprise Mainstream 3yr Wty
Solid State Drive
HP 100GB 3G SATA MLC SFF (2.5-inch) Non-hot plug Enterprise Mainstream 3yr Wty
Solid State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/14038_na/14038_na.html
636605-B21
636601-B21
636599-B21
DA - 13711 North America — Version 16 — September 24, 2012 Page 21
QuickSpecs
Additional Options
HP Insight software
HP ProLiant BL490c Generation 7 (G7) Server Blade
HP Insight Control
HP iLO Advanced Blade Electronic License with 3yr 24x7 Tech Support and Updates
HP iLO Advanced Blade 1 Server License with 3yr 24x7 Tech Support and Updates
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic License
HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server
License
HP Insight Management Media Kit
NOTE: HP Insight Management Media Kit contains DVDs without licenses. Contains HP
Systems Insight Manager, HP Insight Control, HP Matrix Operating Environment, and
Virtual Connect Enterprise Manager software. Uses an integrated installer to perform quick and accurate software installation and updates.
NOTE: Licenses ship without media. The HP Insight Control Media Kit can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates .
NOTE: Electronic licenses can be used to purchase multiple licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support & Update Service.
NOTE: For additional license kits, including bundles with HP BladeSystem enclosures, please see the Insight Control QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Insight Control for Linux
HP Insight Control for Linux including 1yr 24x7 Support Electronic License
HP Insight Control for Linux including 1yr 24x7 Support Single Server License
HP Insight Control for Linux Media Kit
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux can be ordered separately, or can be downloaded at: http://www.hp.com/go/ic-linux (click on
Download button).
NOTE: Electronic licenses can be used to purchase multiple licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, including electronic licensing options, please see the
QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
HP Integrated Lights-Out (iLO) Advanced for BladeSystem
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Electronic License
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server License
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates .
NOTE: Electronic licenses can be used to purchase multiple licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24
BD503AAE
BD502A
T9074BAE
452148-B22
436222-B21
TC213AAE
TC209A
TC208A
TA851AAE
512488-B21
DA - 13711 North America — Version 16 — September 24, 2012 Page 22
QuickSpecs
Additional Options
HP ProLiant BL490c Generation 7 (G7) Server Blade
x 7 HP Software Technical Support Service
NOTE: For additional license kits please see the HP Integrated Lights-Out QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12362_na/12362_na.html
HP Insight Control server deployment
HP Insight Control Server Deployment including 1yr 24x7 Support Electronic License
HP Insight Control Server Deployment including 1yr 24x7 Support Single Server License
NOTE: Licenses ship without media. The Insight Control Media Kit can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates .
NOTE: Electronic licenses can be used to purchase multiple licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the Insight Control QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12631_na/12631_na.html
T9082AAE
452151-B21
High Performance
Clusters
HP Cluster Management Utility
HP Cluster Management Utility Flexible License
NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key. Each license is for one node (server). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key.
HP Insight Cluster Management Utility Flexible License with 3 years of 24x7 updates and technical support
NOTE: These part numbers can be used to purchase one certificate for multiple licenses and support with a single activation key. Each license is for one node (server). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key. Customer also will receive a support agreement.
HP Cluster Management Utility Media
NOTE: Order a minimum of one license per cluster to purchase media including software and documentation, which will be delivered to the customer, and also licenses
CMU management. No license key is delivered or required.
NOTE: For additional license kits please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12612_na/12612_na.html
HP HPC Linux Value Pack
HP High Performance Computing Linux Value Pack 1 Processor Flexible License
NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key. Each license is for one socket (a.k.a. processor). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key.
HP High Performance Computing Linux Value Pack Media Kit
NOTE: This part number can be used to purchase media including software and documentation, which will be delivered to the customer.
QL803B
BD476A
BD477A
TC293B
TC294A
DA - 13711 North America — Version 16 — September 24, 2012 Page 23
QuickSpecs
Additional Options
HP ProLiant BL490c Generation 7 (G7) Server Blade
NOTE: For additional license kits please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/13485_na/13485_na.html
HP Security
HP Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption
(BitLocker) is a data protection feature available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server running Windows Server 2008 has not been tampered with while the system was offline.
NOTE: For more information about TPM, including a white paper, go to: http://www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
488069-B21
HP Storage Controller HP Smart Array P700m Controller
HP Smart Array P700m/512 4-ports Ext PCIe x8 SAS Controller
HP Smart Array P711m Controller
HP Smart Array P711m/1G 6Gb FBWC 4-ports Ext Mezzanine SAS Controller
NOTE: The P711m 1GB cache adds RAID 1+0 and 5.
HP Smart Array P712m Controller
HP Smart Array P712m/256 6Gb 2-ports Int/2-ports Ext Mezzanine SAS Controller
HP Smart Array P712m/ZM 2-ports Int PCIe x8 SAS Controller
NOTE: Provides RAID support on internal non-hot plug SSDs.
Optional Upgrades
HP Smart Array P-Series Low Profile Battery
NOTE: Supports HP Smart Array P700m Controller.
HP 650 mAh P-series Low Profile Battery
NOTE: Supports HP Smart Array P712m Controller.
HP 256MB P-series Cache Upgrade
NOTE: Supports HP Smart Array P712m Controller.
HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and Updates
Single Server License
NOTE: A license key, a minimum of 256MB cache, and battery kit is required to enable
Smart Array Advanced Pack features. For more information go to: http://www.hp.com/go/saap
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13175_na/13175_na.html
(P700m) http://h18000.www1.hp.com/products/quickspecs/14035_na/14035_na.html
(P711m) http://h18000.www1.hp.com/products/quickspecs/13296_na/13296_na.html
(P712m)
DA - 13711 North America — Version 16 — September 24, 2012
508226-B21
513778-B21
488348-B21
484299-B21
452348-B21
575031-B21
462968-B21
516471-B21
Page 24
QuickSpecs
Additional Options
HP ProLiant BL490c Generation 7 (G7) Server Blade
http://h18000.www1.hp.com/products/quickspecs/13200_na/13200_na.html
(Smart Array Advanced Pack)
BK836A
AJ878B
HP I/O Expansion Options HP 640GB IO Accelerator for BladeSystem c-Class
HP 320GB IO Accelerator for BladeSystem c-Class
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13220_na/13220_na.html
HP c-Class Mezzanine
Options
HP 4X QDR QLogic InfiniBand Dual Port Mezzanine HCA for c-Class BladeSystem
HP 4X QDR InfiniBand ConnectX-2 Dual Port Mezzanine HCA for c-Class BladeSystem
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12586_na/12586_na.html
HP Ultrium Tape Blades
HP LTO-4 SB1760c Tape Blade
NOTE: LTO-4 Ultrium tape technology.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html
HP Storage Blades
HP Expansion Blade
HP LTO-5 SB3000c Tape Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html
HP D2200sb Storage Blade
NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is required to support the HP D2200sb PCIe Storage Blade with the BL620c G7. Up to two storage blades are supported per server mix and match (Ultrium Tape, D2200sb PCIe Storage, and/or PCI Expansion Blades).
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in mezzanine slot 2 and/or 3.
NOTE: Please see the HP D2200sb PCIe Storage Blade QuickSpecs for technical specifications and additional information at: http://h18006.www1.hp.com/storage/bladesystem/index.html
.
HP BLc PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe connect board which requires installation.
NOTE: Please see the QuickSpecs for Technical Specifications and additional configuration information: http://h18000.www1.hp.com/products/quickspecs/12753_na/12753_na.html
583210-B21
592519-B21
AQ697A
BS580A
AP880A
448018-B21
DA - 13711 North America — Version 16 — September 24, 2012 Page 25
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Additional Options
HP USB and SD Options
HP USB 2-Button Optical Scroll Mouse
HP USB Standard Keyboard
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that support the
VMware virtualization environment and other HP value-add software like SmartStart.
HP recommends this industry standard USB flash device for use with VMware ESXi. USB device must be installed in the internal slot of the ProLiant server for use with VMware
ESXi. Refer to HP VMware Getting Started Guide for installation instructions.
HP 4GB Secure Digital High Capacity Flash Media Kit
NOTE: Blank SD media devices are supported for use with VMware and Citrix. SD media must be installed in the internal slot of the ProLiant server. Learn more at: http://www.hp.com/go/proliantvirtualization
DC172B
DT528A#ABA
608447-B21
580387-B21
HP Care Pack Services
NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class server blades, cover the server blade and all HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the server.
Hardware Services On-site Service
HP 3 year 4 hour 13x5 BL4xxc Server Blade Hardware Support
HP 3 year 4 hour 24x7 BL4xxc Server Blade Hardware Support
HP 3 year 6 hour 24x7 Call to Repair BL4xxc Server Blade Hardware Support
UK065E
UK066E
UK067E
DA - 13711 North America — Version 16 — September 24, 2012 Page 26
QuickSpecs
Memory
HP ProLiant BL490c Generation 7 (G7) Server Blade
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Memory Population Guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator
Some DIMM installation guidelines are summarized below;
For the BL490c G7 server with eighteen (18) memory slots:
There are three (3) channels per processor; six (6) channels per server
There are three (3) DIMM slots for each memory channel; eighteen (18) total slots
Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
If any Quad rank DIMMs are installed, all channels are limited to only 2 DIMMs per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots will be
1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system
Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of supporting
1.5V operations
DIMM slot/capacity/populated speed table
DIMM Type
Registered DIMMS (RDIMMs)
Unbuffered with ECC DIMMs
(UDIMMs)
DIMM Rank
DIMM Capacity
DIMM Native Speed
(MHz)
Single
Rank
(1R)
4GB
1333
2GB
1333
DIMM Voltage LV/Std
SLOTS THAT CAN BE POPULATED
Std
4GB
1333
Std
Dual Rank (2R)
8GB
1066
Std
8GB
1333
LV/Std
1333
LV Std
Quad Rank (4R)
1066 1066
Std
1066
LV
Single
Rank
(1R)
16GB 4GB 16GB 32GB 1GB
1333
Std
Dual Rank (2R)
2GB
1333
Std
4GB
1333
Std
18 slot servers 18
MAXIMUM CAPACITY (GB)
72
18
36
18
72
18
144
18
144
18
288
12
48
12
192
12
384
12
12
12
24
12
48
DA - 13711 North America — Version 16 — September 24, 2012 Page 27
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Memory
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel 1333 1333 1333 1066 1333 1333 1066 1066 1066 1333 1333 1333
2 DIMM Per Channel 1333 1333 1333 1066 1333 1333 800 800 800 1066 1066 1066
3 DIMM Per Channel 800 800 800 800 800 800 n/a n/a n/a n/a n/a n/a
NOTES:
PC3-10600 DIMMs have a maximum speed of 1333MHz. PC3-8500 DIMMs have a maximum speed of 1066MHz
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slower
DIMM is on the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be 1066MHz
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels, the maximum speed will be 1066MHz
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz
Maximum memory speed will also depend on the processor installed
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc
HP ProLiant BL490c G7 Server Blade DIMM slot and configuration diagrams
Basic memory slot & population diagram
Chnl 1
Chnl 2
Chnl 3
Population order; start with "A" first, "B" second, "C" third, etc.
slot #
3
1
2
4
5
6
7
8
9
18 DIMM SLOTS (9 per CPU node)
CPU1
population order
A
G
D
I
F
C
B
H
E
7
8
9
6
4
5 slot #
3
1
2
HP ProLiant BL490c G7 Server Blade (1P Model)
Standard memory configuration (1 CPU model)
6GB (3 x 2GB) of PC3-10600 (DDR3-1333) RDIMMs
CPU2
population order
Chnl 1
B
H
E
A
G
D
Chnl 2
Chnl 3 I
F
C
DA - 13711 North America — Version 16 — September 24, 2012 Page 28
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Memory
Chnl 1
Chnl 2
Chnl 3
5
6
4 slot #
1
2
3
8
9
7
CPU1
population order
G: empty
D: empty
A: 2GB DIMM
H: empty
E: empty
B: 2GB DIMM
I: empty
F: empty
C: 2GB DIMM
Standard memory plus optional memory (1 CPU model)
5
6
4 slot #
1
2
3
8
9
7
CPU2
population order
G: empty Chnl 1
D: empty
A: empty
H: empty
E: empty
B: empty
Chnl 2
I: empty
F: empty
C: empty
Chnl 3
Chnl 1
54GB, consisting of three (3) 2GB RDIMMs plus six (6) 8GB RDIMMs
3x 2GB dual-rank PC3-10600 RDIMMs
6x 8GB dual-rank PC3-8500 RDIMMs
Chnl 2
Chnl 3
5
6
4 slot #
1
2
3
8
9
7
CPU1
population order
G: 8GB DIMM
D: 8GB DIMM
A: 2GB DIMM
H: 8GB DIMM
E: 8GB DIMM
B: 2GB DIMM
I: 8GB DIMM
F: 8GB DIMM
C: 2GB DIMM
Standard Memory Replaced with Optional Memory (1 CPU model)
RDIMM maximum configuration
96GB, consisting of nine (9) 16GB quad-rank PC3-8500 RDIMMs
5
6
4 slot #
1
2
3
8
9
7
CPU2
population order
G: empty Chnl 1
D: empty
A: empty
H: empty
E: empty
B: empty
Chnl 2
I: empty
F: empty
C: empty
Chnl 3
DA - 13711 North America — Version 16 — September 24, 2012 Page 29
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Memory
Chnl 1
Chnl 2
Chnl 3
5
6
4 slot #
1
2
3
8
9
7
UDIMM maximum configuration (1 CPU model)
CPU1
population order
G: empty
D: 16GB DIMM
A: 16GB DIMM
H: empty
E: 16GB DIMM
B: 16GB DIMM
I: empty
F: 16GB DIMM
C: 16GB DIMM
5
6
4 slot #
1
2
3
8
9
7
CPU2
population order
G: empty Chnl 1
D: empty
A: empty
H: empty
E: empty
B: empty
Chnl 2
I: empty
F: empty
C: empty
Chnl 3
Chnl 1
Chnl 2
Chnl 3
24GB, consisting of six (6) 4GB dual-rank PC3-10600 UDIMMs
8
9
7
5
6
4 slot #
1
2
3
CPU1
population order
G: empty
D: 4GB DIMM
A: 4GB DIMM
H: empty
E: 4GB DIMM
B: 4GB DIMM
I: empty
F: 4GB DIMM
C: 4GB DIMM
Standard Memory Replaced with Optional Memory (2 CPU Model)
RDIMM maximum configuration
384GB, consisting of twelve (18) 32GB quad-rank PC3L-8500 RDIMMs
5
6
4 slot #
1
2
3
8
9
7
CPU2
population order
G: empty Chnl 1
D: empty
A: empty
H: empty
E: empty
B: empty
Chnl 2
I: empty
F: empty
C: empty
Chnl 3
DA - 13711 North America — Version 16 — September 24, 2012 Page 30
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Memory
Chnl 1
Chnl 2
Chnl 3
5
6
4 slot #
1
2
3
8
9
7
UDIMM maximum configuration (2 CPU model)
CPU1
population order
G: empty
D: 32GB DIMM
A: 32GB DIMM
H: empty
E: 32GB DIMM
B: 32GB DIMM
I: empty
F: 32GB DIMM
C: 32GB DIMM
5
6
4 slot #
1
2
3
8
9
7
CPU2
population order
G: empty Chnl 1
D: 32GB DIMM
A: 32GB DIMM
H: empty
E: 32GB DIMM
B: 32GB DIMM
Chnl 2
I: empty
F: 32GB DIMM
C: 32GB DIMM
Chnl 3
Chnl 1
Chnl 2
Chnl 3
48GB, consisting of twelve (12) 4GB dual-rank PC3-10600 UDIMMs
8
9
7
5
6
4 slot #
1
2
3
CPU1
population order
G: empty
D: 4GB DIMM
A: 4GB DIMM
H: empty
E: 4GB DIMM
B: 4GB DIMM
I: empty
F: 4GB DIMM
C: 4GB DIMM
NOTE: Capacity references are rounded to the common Gigabyte values.
1GB = 1024MB
2GB = 2048MB
4GB = 4096MB
8GB = 8192MB
16GB = 16384MB
32GB = 32768MB
5
6
4 slot #
1
2
3
8
9
7
CPU2
population order
G: empty Chnl 1
D: 4GB DIMM
A: 4GB DIMM
H: empty
E: 4GB DIMM
B: 4GB DIMM
Chnl 2
I: empty
F: 4GB DIMM
C: 4GB DIMM
Chnl 3
DA - 13711 North America — Version 16 — September 24, 2012 Page 31
QuickSpecs
HP ProLiant BL490c Generation 7 (G7) Server Blade
Memory
Following are memory options available from HP:
HP Memory Registered DIMMs (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power
Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power
Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP
Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP Memory
Kit
Unbuffered with ECC (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration
Tool: www.hp.com/go/ddr3memory-configurator .
NOTE: PC3L is a low voltage memory.
500656-B21
500658-B21
593339-B21
604504-B21
500662-B21
604506-B21
627812-B21
500666-B21
627814-B21
500668-B21
500670-B21
500672-B21
DA - 13711 North America — Version 16 — September 24, 2012 Page 32
QuickSpecs
Storage
HP ProLiant BL490c Generation 7 (G7) Server Blade
1 Non Hot Plug Solid State Drive (SSD) Bay 1
2 Non Hot Plug Solid State Drive (SSD) Bay 2
Hard Drives
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SATA Non-hot Plug 2.5" Midline (MDL) Solid State Drives
Quantity
Supported
2 400GB 3G SATA MLC SSF
SSD
200GB 3G SATA MLC SSF
SSD
100GB 3G SATA MLC SSF
SSD
Position
Supported Controller
1-2 HP Integrated SATA Controller
HP Smart Array P712m Controller
DA - 13711 North America — Version 16 — September 24, 2012 Page 33
QuickSpecs
Technical Specifications
System Unit
HP ProLiant BL490c Generation 7 (G7) Server Blade
Dimensions (H x W x D)
(with bezel)
Weight
(approximate)
Power Specifications
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
7.154 x 2.19 x 20.058 in (18.17 x 5.56 x 50.95 cm)
Maximum
(all hard drives and processors installed)
Minimum
(one hard drive and processor installed)
14.20 lb (6.44 kg)
10.75 lb (4.87 kg)
For power specifications including Input Requirements, BTU Rating, and Power
Supply Output, please see the HP BladeSystem c-Class Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_na/
12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_na/
12810_na.html
To review typical system power ratings use the HP BladeSystem Power Sizer which is available via the online tool located at URL: http://www.hp.com/go/bladesystem/powercalculator
NOTE: For optimal cooling and system performance the BL490c G7 requires the c7000 enclosure to be configured with 10 fans and the c3000 enclosure to be configured with 6 fans.
Operating 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the type and number of options installed.
Non-operating
Operating
Non-operating
Operating
System performance may be reduced if operating with a fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, noncondensing.
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, noncondensing.
3050 m (10,000 ft). This value may be limited by the type and number of options installed.
Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
DA - 13711 North America — Version 16 — September 24, 2012 Page 34
QuickSpecs
Technical Specifications
HP ProLiant BL490c Generation 7 (G7) Server Blade
Acoustic Noise
Non-operating 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
For acoustic noise specifications, please see the HP BladeSystem c-Class
Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_na/
12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_na/
12810_na.html
HP Integrated Lights-Out
3 (iLO 3) integrated on system board
Architecture
Processor
Upgradeability
Video Support
Interfaces
PCI Express based health and remote management ASIC
PCI Express RISC processor core running at 250MHz
Option firmware upgradeable via Flash ROM
1600 x 1200 DVR max resolution
One Ethernet network connection (10/100Mb/s)
128-MB DDR with ECC
Memory
Operating System
Support
Microsoft Windows 2008 R2
Microsoft Windows 2008 (32 bit and 64 bit)
Microsoft Windows Server 2008 Standard Edition (32bit and 64bit)
Microsoft Windows Server 2008 Enterprise Edition (32bit and 64bit)
Red Hat Enterprise Linux 5.4 (32 bit and 64 bit)
SUSE LINUX Enterprise Server 11 (32bit and 64bit)
SUSE LINUX Enterprise Server 10 (32bit and 64bit)
VMware ESX 4.0
VMware ESX 3.5.0
Client System Support
Microsoft Windows 7
Microsoft Windows XP Professional Edition
Microsoft Windows Vista Business and Ultimate Editions
Red Hat Enterprise Desktop 5.00
SUSE Linux Enterprise Desktop 11
SUSE Linux Enterprise Desktop 10
Client Browser Support
Microsoft Internet Explorer 8
Microsoft Internet Explorer 7
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows and Linux systems)
Firefox 3.0 (on supported Windows and Linux systems)
Command Line Support
Secure Shell and serial port access
Secure Socket Layer
Secure Shell version 2
DA - 13711 North America — Version 16 — September 24, 2012 Page 35
QuickSpecs
Technical Specifications
Security
HP ProLiant BL490c Generation 7 (G7) Server Blade
Directory Support
Services
Driver Support
Management protocols supported
Advanced Encryption Standard (AES) and Triple Data Encryption Standard
(3DES) on browser, CLP and XML scripting interface
AES encryption of video
RC4 encryption of video
Active Directory v1.0 (Windows 2003)
HP ProLiant iLO3 Management Controller Driver Package
SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems Management
Architecture for Server Hardware Command Line Protocol (SMASH CLP), HP
RIBCL XML
Embedded HP NC553i Dual
Port FlexFabric 10Gb
Adapter
Type
Network Processor
Data Transfer Method
Standard Features
Integrated dual-port KR 10GbE with FlexFabric (FCoE or iSCSI) capability
ServerEngines BE3 x8 PCI Express 2.0
Network Transfer Rate
Two ports at 20 Gbps full duplex; 40 Gbps aggregate full duplex theoretical bandwidth
NOTE: Each port is autosensing 1 Gb / 10 Gb, and can interoperate with 1 Gb
HP BladeSystem c-Class interconnect components. Both ports will operate at the same speed.
NOTE: Each port on the NC553i adapter transmits from the server at 20 Gbps
(theoretical) full duplex.
IEEE Compliance
802.1p QoS, 802.1Q VLAN tagging, 802.3ad link aggregation, 802.3ap
10GBase-KR, and 802.3x flow control
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
9K Jumbo frames (4K Jumbo frames when in FCoE mode)
Microsoft Windows Receive Side Scaling (RSS)
Optional accelerated iSCSI
Environment-friendly
Products and Approach
End-of-life Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green . To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green . These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.
DA - 13711 North America — Version 16 — September 24, 2012 Page 36
QuickSpecs
Technical Specifications
© Copyright 2012 Hewlett-Packard Development Company, L.P.
HP ProLiant BL490c Generation 7 (G7) Server Blade
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13711 North America — Version 16 — September 24, 2012 Page 37
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project