CSC-5300 - Extron Electronics

IP Link® Device Interface
Communication Sheet
cyps_2_7164_1.pke
Revision: 2/24/2014
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user's manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Manufacturer:
Firmware Version:
Model(s):
Switcher
Cypress
N/A
CSC-5300
Version History:
Driver
Version
1
Date
2/20/2014
IP Link
Compiler
GC
Version
1.6.0
3.5.1
Notes
Initial version.
Driver Notes:
Page 1 of 3
IP Link® Device Interface
Communication Sheet
cyps_2_7164_1.pke
Revision: 2/24/2014
Control Commands & States:
Audio Delay
On
Off
De-Interlacing
On
Off
Input
HDMI1-3
PC
S-Video 1-2
Video 1-2
Power Control
On
Off
Reset
Execute
Component 1-2
Status Available:
Audio Delay
On
Off
Connection Status
Connected
Disconnected
De-Interlacing
On
Off
Input
HDMI1-3
PC
S-Video 1-2
Video 1-2
On
Off
Power Control
Component 1-2
MLC60 Series Supported Commands:
Audio Delay
On
Off
De-Interlacing
On
Off
Input
HDMI1-3
PC
S-Video 1-2
Video 1-2
Power Control
On
Off
Reset
Execute
Page 2 of 3
Component 1-2
cyps_2_7164_1.pke
IP Link® Device Interface
Communication Sheet
Revision: 2/24/2014
Cable and Adapter Requirements:
M/F DB9 RS-232 straight serial cable (Extron Electronics P/N 26-433-XX)
Notes for the Device:
Serial communication:
Port Type: RS-232
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Pin Assignments Diagram:
Note: Captive screw connector may also be used as a serial connection.
General Notes:
Page 3 of 3