AT-HD-V44M

IP Link® Device Interface
Communication Sheet
atna_15_5984_1.pke
Revision: 7/30/2012
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user's manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Manufacturer:
Firmware Version:
Model(s):
Matrix Switcher
Atlona
N/A
AT-HD-V44M
Version History:
Driver
Version
1
Date
7/26/2012
IP Link
Compiler
GC
Version
1.5.1
3.3.2
Notes
Initial version.
Driver Notes:
Page 1 of 3
IP Link® Device Interface
Communication Sheet
atna_15_5984_1.pke
Control Commands & States:
Output 1-4
1-4
Power Control
On
Preset Clear
0-9
Preset Recall
0-9
Preset Save
0-9
Off
Status Available:
Connection Status
Connected
Output 1-4
1-4
Disconnected
MLC60 Series Supported Commands:
Output 1-4
1-4
Power Control
On
Preset Clear
0-9
Preset Recall
0-9
Preset Save
0-9
Off
Page 2 of 3
Revision: 7/30/2012
atna_15_5984_1.pke
IP Link® Device Interface
Communication Sheet
Revision: 7/30/2012
Cable and Adapter Requirements:
F /F Straight cable
Notes for the Device:
Serial communication:
Port Type: RS-232
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Pin Assignments Diagram:
Note: Captive screw connector may also be used as a serial connection.
General Notes:
Page 3 of 3