DESAXL
Instruction Manual
EN Digital Video
Recorders
DÉSAXL | Instruction Manual | Important Safeguards
EN | 2
Important Safeguards
1. Read, Follow, and Retain Instructions - All safety
and operating instructions should be read and
followed before operating the unit. Retain instructions
for future reference.
2. Heed Warnings - Adhere to all warnings on the unit
and in the operating instructions.
3. Attachments - Attachments not recommended by
the product manufacturer should not be used, as they
may cause hazards.
4. Installation Cautions - Do not place this unit on an
unstable stand, tripod, bracket, or mount. The unit
may fall, causing serious injury to a person and
serious damage to the unit. Use only manufacturerrecommended accessories, or those sold with the
product. Mount the unit per the manufacturer's
instructions. Appliance and cart combination should
be moved with care. Quick stops, excessive force, or
uneven surfaces may cause the appliance and cart
combination to overturn.
5. Cleaning - Unplug the unit from the outlet before
cleaning. Follow any instructions provided with the
unit. Generally, using a damp cloth for cleaning is
sufficient. Do not use liquid cleaners or aerosol
cleaners.
6. Servicing - Do not attempt to service this unit
yourself. Opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
7. Damage Requiring Service - Unplug the unit from
the main AC power source and refer servicing to
qualified service personnel under the following
conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled or an object has fallen
into the unit.
• If the unit has been exposed to water and/or
inclement weather (rain, snow, etc.).
• If the unit does not operate normally, when
following the operating instructions. Adjust only
those controls specified in the operating
instructions. Improper adjustment of other controls
may result in damage, and require extensive work
by a qualified technician to restore the unit to
normal operation.
• If the unit has been dropped or the cabinet
damaged.
• If the unit exhibits a distinct change in
performance, this indicates that service is needed.
8. Replacement Parts - When replacement parts are
required, the service technician should use
replacement parts specified by the manufacturer or
that have the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electrical shock or other hazards.
9. Safety Check - Upon completion of servicing or
repairs to the unit, ask the service technician to
perform safety checks to ensure proper operating
condition.
Bosch Security Systems | November 17, 2004
10. Power Sources - Operate the unit only from the type
of power source indicated on the label. If unsure of
the type of power supply to use, contact your dealer
or local power company.
• For units intended to operate from battery power,
refer to the operating instructions.
• For units intended to operate with External Power
Supplies, use only the recommended approved
power supplies.
• For units intended to operate with a limited power
source, this power source must comply with
EN60950. Substitutions may damage the unit or
cause fire or shock.
• For units intended to operate at 24VAC, normal
input voltage is 24VAC. Voltage applied to the
unit's power input should not exceed 30VAC.
User-supplied wiring, from the 24VAC supply to
unit, must be in compliance with electrical codes
(Class 2 power levels). Do not ground the 24VAC
supply at the terminals or at the unit's power
supply terminals.
11. Coax Grounding - If an outside cable system is
connected to the unit, ensure that the cable system is
grounded. U.S.A. models only - Section 810 of the
National Electrical Code, ANSI/NFPA No.70,
provides information regarding proper grounding of
the mount and supporting structure, grounding of the
coax to a discharge unit, size of grounding
conductors, location of discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.
12. Grounding or Polarization - This unit may be
equipped with a polarized alternating current line
plug (a plug with one blade wider than the other).
This safety feature allows the plug to fit into the
power outlet in only one way. If unable to insert the
plug fully into the outlet, try reversing the plug. If the
plug still fails to fit, contact an electrician to arrange
replacement of the obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Alternately, this unit may be equipped with a
3-wire grounding plug (a plug with a third pin, for
grounding). This safety feature allows the plug to fit
into a grounding power outlet only. If unable to insert
the plug into the outlet, contact an electrician to
arrange replacement of the obsolete outlet. Do not
defeat the safety purpose of the grounding plug.
13. Lightning - For added protection during a lightning
storm, or when this unit is left unattended and
unused for long periods of time, unplug the unit from
the wall outlet and disconnect the cable system. This
will prevent damage to the unit due to lightning and
power line surges.
EN | 3
DÉSAXL | Instruction Manual | FCC & ICES Information
For Indoor Product
1. Water and Moisture - Do not use this unit near
water - for example, in a wet basement, in an
unprotected outdoor installation or in any area
classified as a wet location.
2. Object and Liquid Entry - Never push objects of
any kind into this unit through openings, as they
may touch dangerous voltage points or short out
parts that could result in a fire or electrical shock.
Never spill liquid of any kind on the unit.
3. Power Cord and Power Cord Protection - For
units intended to operate with 230VAC, 50Hz,
the input and output power cord must comply
with the latest versions of IEC Publication 227 or
IEC Publication 245.
Power supply cords should be routed so they are
not likely to be walked on or pinched. Pay
particular attention to location of cords and plugs,
convenience receptacles, and the point of exit
from the appliance.
4. Overloading - Do not overload outlets and
extension cords; this can result in a risk of fire or
electrical shock.
For Outdoor Product
Power Lines - An outdoor system should not be
located in the vicinity of overhead power lines,
electric lights or power circuits, or where it may
contact such power lines or circuits. When
installing an outdoor system, extreme care should
be taken to keep from touching power lines or
circuits, as this contact might be fatal. U.S.A.
models only - refer to the National Electrical
Code Article 820 regarding installation of CATV
systems.
For Rack-mount Product
1. Ventilation - This unit should not be placed in a
built-in installation or rack, unless proper
ventilation is provided, or the manufacturer’s
instructions have been adhered to. The
equipment must not exceed its maximum
operating temperature requirements.
2. Mechanical Loading - Mounting of the
equipment in a rack shall be such that a
hazardous condition is not achieved due to
uneven mechanical loading.
Bosch Security Systems | November 17, 2004
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC SENSITIVE
DEVICES
WARNING:
Electrostatic-sensitive device. Use
proper CMOS/MOSFET handling
precautions to avoid electrostatic
discharge.
NOTE: Grounded wrist straps must be worn and proper ESD
safety precautions observed when handling the electrostaticsensitive printed circuit boards.
CAUTION: Lithium Battery
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the battery manufacturer’s
instructions.
Safety Precautions
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates the presence of
uninsulated “dangerous voltage” within the
product’s enclosure. This may constitute a
risk of electric shock.
The user should consult the operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Attention: Installation should be performed by
qualified service personnel only in accordance
with the National Electrical Code or applicable
local codes.
Power Disconnect. Units with or without
ON-OFF switches have power supplied to the
unit whenever the power cord is inserted into the
power source; however, the unit is operational
only when the ON-OFF switch is in the ON
position. The power cord is the main power
disconnect for all units.
EN | 4
DÉSAXL | Instruction Manual | Safety Precautions
FCC & ICES INFORMATION
Sicherheitshinweise
(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules and ICES-003 of Industry Canada. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses and radiates radio
frequency energy, and if not installed and used in accordance
with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which
case the user will be required to correct the interference at his
expense.
Intentional or unintentional changes or modifications, not
expressly approved by the party responsible for compliance, shall
not be made. Any such changes or modifications could void the
user’s authority to operate the equipment. If necessary, the user
should consult the dealer or an experienced radio/television
technician for corrective action. The user may find the following
booklet, prepared by the Federal Communications Commission,
helpful: How to Identify and Resolve Radio-TV Interference
Problems. This booklet is available from the U.S. Government
Printing Office, Washington, DC 20402,
Stock No. 004-000-00345-4.
WARNING: This is a Class A product. In a domestic
environment, this product may cause radio interference,
in which case, the user may be required to take adequate
measures.
VORSICHT: UM EINEN ELEKTRISCHEN SCHLAG ZU
VERMEIDEN, IST DIE ABDECKUNG (ODER RÜCKSEITE) NICHT
ZU ENTFERNEN. ES BEFINDEN SICH KEINE TEILE IN DIESEM
BEREICH, DIE VOM BENUTZER GEWARTET WERDEN
KÖNNEN. LASSEN SIE WARTUNGSARBEITEN NUR VON
QUALIFIZIERTEM WARTUNGSPERSONAL AUSFÜHREN.
Das Symbol macht auf nicht isolierte „gefährliche Spannung"
im Gehäuse aufmerksam. Dies kann zu einem elektrischen
Schlag führen.
Der Benutzer sollte sich ausführlich über Anweisungen für
die Bedienung und Instandhaltung (Wartung) in den
begleitenden Unterlagen informieren.
Achtung! Die Installation sollte nur von qualifiziertem
Kundendienstpersonal gemäß jeweils zutreffender
Elektrovorschriften ausgeführt werden.
Unterbrechung des Netzanschlusses. Geräte mit oder ohne
Netzschalter haben Spannung am Gerät anliegen, sobald der
Netzstecker in die Steckdose gesteckt wird. Das Gerät ist jedoch
nur betriebsbereit, wenn der Netzschalter (EIN/AUS) auf EIN
steht. Wenn das Netzkabel aus der Steckdose gezogen wird, ist
die Spannungszuführung zum Gerät vollkommen unterbrochen.
Precauciones de Seguridad
Sécurité
ATTENTION : POUR ÉVITER TOUT RISQUE D'ÉLECTROCUTION,
N'ESSAYEZ PAS DE RETIRER LE CAPOT (OU LE PANNEAU
PRECAUCIÓN: PARA DISMINUIR EL RIESGO DE DESCARGA
ELÉCTRICA, NO RETIRE LA CUBIERTA (NI LA PARTE
POSTERIOR). NO EXISTEN PIEZAS DE RECAMBIO EN EL
INTERIOR DEL EQUIPO. EL PERSONAL DE SERVICIO
CUALIFICADO SE ENCARGA DE REALIZAR LAS
REPARACIONES.
ARRIÈRE). CET APPAREIL NE CONTIENT AUCUN COMPOSANT
SUSCEPTIBLE D'ÊTRE RÉPARÉ PAR L'UTILISATEUR. CONFIEZ
LA RÉPARATION DE L'APPAREIL À DU PERSONNEL QUALIFIÉ.
Ce symbole signale que le produit renferme une « tension
potentiellement dangereuse » non isolée susceptible de
provoquer une électrocution.
Ce symbole invite l'utilisateur à consulter les instructions
d'utilisation et d'entretien (dépannage) reprises dans la
documentation qui accompagne l'appareil.
Attention : l'installation doit exclusivement être réalisée par du
personnel qualifié, conformément au code national d'électricité
américain (NEC) ou au code d'électricité local en vigueur.
Coupure de l'alimentation. Qu'ils soient pourvus ou non d'un
commutateur ON/OFF, tous les appareils reçoivent de l'énergie une
fois le cordon branché sur la source d'alimentation. Toutefois,
l'appareil ne fonctionne réellement que lorsque
le commutateur est réglé sur ON. Le débranchement du cordon
d'alimentation permet de couper l'alimentation des appareils.
Bosch Security Systems | November 17, 2004
Este símbolo indica que existen puntos de tensión peligrosos
sin aislamiento dentro de la cubierta de la unidad. Estos
puntos pueden constituir un riesgo de descarga eléctrica.
El usuario debe consultar las instrucciones de funcionamiento y
mantenimiento (reparación) en la documentación que se
suministra con el aparato.
Atención: la instalación la debe realizar únicamente personal
cualificado de conformidad con el National Electric Code o las
normas aplicables en su país.
Desconexión de la alimentación. Las unidades con o sin
interruptores de encendido/apagado reciben alimentación
eléctrica siempre que el cable de alimentación esté conectado a
la fuente de alimentación. Sin embargo, la unidad sólo funciona
cuando el interruptor está en la posición de encendido. El cable
de alimentación es la principal fuente de desconexión de todas
las unidades.
EN | 5
DÉSAXL | Instruction Manual | Safety Precautions
Veiligheidsmaatregelen
VOORZICHTIG: OPEN DE BEHUIZING OF DE ACHTERKANT
VAN HET APPARAAT NIET. ZO VERMINDERT U HET RISICO
OP ELEKTRISCHE SCHOKKEN. IN HET APPARAAT
BEVINDEN ZICH GEEN ONDERDELEN DIE U ZELF KUNT
REPAREREN. LAAT SERVICE EN ONDERHOUD UITVOEREN
DOOR GEKWALIFICEERD PERSONEEL.
Medidas de Segurança
CUIDADO: PARA REDUZIR O RISCO DE CHOQUE
ELÉCTRICO, NÃO RETIRE A TAMPA (OU A PARTE
POSTERIOR). NO INTERIOR, NÃO EXISTEM PEÇAS QUE
POSSAM SER REPARADAS PELO UTILIZADOR. REMETA A
ASSISTÊNCIA PARA OS TÉCNICOS QUALIFICADOS.
Dit symbool geeft aan dat er binnen in het apparaat
ongeïsoleerde, gevaarlijke spanning aanwezig is die mogelijk
elektrische schokken kan veroorzaken.
Este símbolo indica a presença de "tensão perigosa" não isolada
dentro da estrutura do produto, o que pode constituir risco de
choque eléctrico.
De gebruiker dient de bedienings- en onderhoudsvoorschriften
te raadplegen in de documentatie die werd meegeleverd met
het apparaat.
O utilizador deve consultar as instruções de funcionamento
e manutenção (assistência) nos documentos que
acompanham o aparelho.
Attentie: het apparaat mag alleen door gekwalificeerd personeel
worden geïnstalleerd. De installatie dient in overeenstemming
met de nationale elektrische richtlijnen of de van toepassing
zijnde lokale richtlijnen te worden uitgevoerd.
Spanning uitschakelen. Apparatuur met of zonder
aan-uitschakelaar staat onder spanning zolang de stekker is
aangesloten op de wandcontactdoos. De apparatuur is uitsluitend
in werking als de aan-uitschakelaar aan staat. Het netsnoer is de
"hoofdschakelaar" voor alle apparatuur.
Sicurezza
ATTENZIONE: PER RIDURRE IL RISCHIO DI SCOSSE
ELETTRICHE NON RIMUOVERE LA COPERTURA (O IL
PANNELLO POSTERIORE). L'UNITÀ NON CONTIENE
COMPONENTI INTERNI RIPARABILI DALL'UTENTE. PER
QUALSIASI INTERVENTO, RIVOLGERSI A PERSONALE
TECNICO QUALIFICATO.
Questo simbolo indica la presenza di "tensione pericolosa" non
isolata all'interno del contenitore del prodotto. Ciò comporta un
potenziale rischio di scosse elettriche.
Si consiglia di consultare le istruzioni operative e di
manutenzione (interventi tecnici) contenute nella
documentazione fornita con il dispositivo.
Attenzione: l'installazione deve essere effettuata esclusivamente
da personale tecnico qualificato in conformità con il National
Electrical Code o con le normative locali vigenti.
Scollegamento dell'alimentazione. Le unità dotate o sprovviste di
interruttori ON-OFF vengono alimentate quando si inserisce il
cavo nella presa dell'alimentazione. L'unità è tuttavia in funzione
solo quando l'interruttore ON-OFF si trova nella posizione ON. Il
cavo di alimentazione costituisce il dispositivo di scollegamento
dell'alimentazione principale per tutte le unità.
Bosch Security Systems | November 17, 2004
Atenção: a instalação deve ser executada apenas por técnicos
qualificados da assistência, de acordo com o código eléctrico
nacional ou os códigos locais aplicáveis.
Corte de corrente. As unidades com ou sem interruptores
ON-OFF (ligar/desligar) recebem corrente sempre que o fio de
alimentação está introduzido na fonte de alimentação; contudo, a
unidade apenas está operacional quando o interruptor ON-OFF
está na posição ON. O fio de alimentação destina-se a desligar a
corrente em todas as unidades.
DÉSAXL | Instruction Manual | Table of Contents
EN | 6
Table of Contents
DÉSAXL Instruction Book
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1.
PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
1.1
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
1.2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
1.3
Basic Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
1.4
DÉSAXL Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2
UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.1
Supplied Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.2
User-Supplied Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
3
APPROVED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
3.1
Extended Storage Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
3.2
KVMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
3.3
Power Backup/UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
3.4
PTZ Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
3.5
Analog Keyboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
5
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
5.1
Before Powering Up The DÉSAXL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
5.2
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
5.3
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
5.4
Basic Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
5.5
Connecting Bosch AutoDomes® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
5.6
Connecting Other Manufacturer’s Domes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
5.7
Connecting Sensor Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
5.8
Connecting Control Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
5.9
Connecting the Watchdog Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
6
INITIAL DÉSAXL POWER-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
6.1
DÉSAXL Launch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
6.2
First Time Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
6.3
Initial Power-up Administrative Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
7
MAIN SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
7.1
Live Display Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
7.2
Storage Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
7.3
Time and Date Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
7.4
Camera Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
7.5
Alarm Sensor Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
7.6
Auxiliary Control Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
7.7
Search Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
7.8
Setup Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
7.9
Login / Logout Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
7.10 Quit Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
7.11 Item Description In Cameos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
7.12 Event Alert Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
7.13 About Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
7.14 Help Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Table of Contents
EN | 7
7.15 Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
7.16 Server Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
8
DÉSAXL SYSTEM SETUP OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
8.1
Integrated Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
8.2
Save and Close Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
8.3
Hardware Setup Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
8.4
Motion Setup Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
8.5
Schedule Setup Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
8.6
Screen Division Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
8.7
Communications Setup Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
8.8
Server Information Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
8.9
Password Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
8.10 Audio Setup Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
8.11 System Setup Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
8.12 Storage Setup Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
8.13 E-Map Setup Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
8.14 View Log Records Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
8.15 E-Mail Setup Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
8.16 Smart Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
8.17 Video Measure Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
9
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
9.1
Search Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
9.2
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
9.3
IntelliSearch Graphical Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
9.4
Selecting Information Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
9.5
Screen Divisions Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
9.6
Backup Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
9.7
Bookmark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
9.8
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
9.9
Image Enhancement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
9.10 Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
9.11 Index Search Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
9.12 Skip and Delay Sliders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
9.13 Smart Motion Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
9.14 Remote Web Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
10
DÉSAXL REMOTE CLIENT GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
10.1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
10.2 Loading the DÉSAXL Remote Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
10.3 DÉSAXL Remote Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
10.4 Making a Remote Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
10.5 Searching Archived Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
10.6 Remote Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
11
POCKET PC VIDEO VIEWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
APPENDIX A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Bosch Security Systems | November 17, 2004
EN | 8
DÉSAXL | Instruction Manual | Product Description
1
PRODUCT DESCRIPTION
1.4 DÉSAXL Cautions
1.1 Models
•
DR2xxxxx:
• DÉSAXL
• Channel 8 or 16
• 120/240 fps
• 250, 500, 750, 1000GB
Isolate all connections to the DÉSAXL from
outside environments, by surge suppression or
nonconductive materials (i.e. fiber).
•
Switch power supply disconnect switch to the
OFF (O) position before unplugging from any
power source.
1.2 Features
•
Ensure that the Watchdog cable is connected on
the rear of the system from COM 1 to the
Watchdog Card (DIN) connector.
•
It is NOT recommended to modify or add the
following:
•
Windows® XP Professional OS
•
Frame Rates of 120, 240 fps
•
Remote Multiserver Access (Maximum of 16
Simultaneous Connections)
•
Remote Administration Configuration (Limited)
•
In-cameo Local and Remote PTZ Control
•
POS Database Interface (Using Separate
Software, Optional)
•
Smart Motion Search
•
Intelligent Search Engine
•
Remote Event Notification
•
Ethernet, USB 2.0, and IEEE 1394
Connections, Standard
•
DVD/CD Writer, Standard
•
Remote Client Software, 2002 or Newer,
Standard
•
Pocket PC Software, Standard
•
Single Channel Audio Recording
•
Two Way Audio From Local to Remote Center
1.3 Basic Functionality
The DÉSAXL Digital Recorder is designed to
simultaneously record, search, play back, archive, and
have a spot monitor output. Additionally, remote
connections can view live video, play back, archive,
and create a video audit trail. Single channel audio
recording is available, with any selected camera.
The LTC 8016/90 BilinxTM Data Interface Unit
accepts a Biphase output from the DESAXL
to allow control and configuration of Bosch
DinionTM and AutoDome cameras using only
the video cable1.Recording can be continuous, or
1. Hardware not recommended or supported
by Bosch.
2. Software that is not already installed on the
DÉSAXL.
3. Open the DÉSAXL chassis to add, modify,
or repair without being instructed to do so
by an authorized Bosch Technician.
2
UNPACKING
This electronic equipment should be unpacked and
handled carefully.
2.1 Supplied Package Contents
Ensure that the following items are included:
•
DÉSAXL DVR (Digital Video Recorder)
•
PC Case Door Keys
•
Removable OS Drive Key
•
Installation Manual
•
Mouse
•
Keyboard
•
Power Cord
•
Watchdog/PTZ Control Cable
•
RS-422 PTZ Data Cable
•
DÉSAXL Software CD
•
DÉSAXL Remote Client and Pocket PC
Software CD
activated in a variety of setting combinations. Activity
detection is by motion, physical alarm input, or both.
All cameras can be individually masked from viewing,
recording, or from scheduled recording.
•
LTC 8508/01 Looping Cable
•
Six (6) Rack-mount Screws and Spacers
•
Roxio® CD Software
1
•
DÉSAXL Warning Sheet
NOTE: Bosch LTC 8786/60-RS-232 to Biphase
converter is required.
Bosch Security Systems | November 17, 2004
EN | 9
DÉSAXL | Instruction Manual | Approved Accessories
2.2 User-supplied Components
•
PC Monitor (1024x768 32-bit True Color)
•
Surge Protection or UPS (Uninterruptible Power
Supply); Highly Recommended
•
PTZ Converters or Adapters (LTC 8786/60)
•
USB Modem
•
Ethernet Cables
•
PC Speakers
•
PC Microphone
•
CD-R, CD-RW Media
•
CD-R, CD-RW, DVD +R, DVD -R,
DVD +RW, DVD -RW
3
APPROVED
ACCESSORIES
3.1 Extended Storage Devices
•
Bosch DVAD Series Arrays
•
Bosch DVAS Series Arrays
3.2 KVMs
•
StarTech®.com Ltd. StarView KVM Switches.
3.3 Power Backup/UPS/Surge
Suppression
•
Uninterruptible Power Supplies (UPS)
•
Surge Suppressors
Why is UPS and Surge Suppression Important?
The product purchased is electronic
equipment that is sensitive to fluctuations in
power sources. This product contains
components that can be damaged if the power
source has a sudden surge, brown out, or
black out. The use of UPS and Surge
Suppression devices can greatly reduce this
factor. If you have any questions in regards to
the type of UPS or surge device, contact
Technical Support.
Bosch Security Systems | November 17, 2004
3.4 PTZ Adapters
•
Bosch LTC 8786 (RS-232 and Analog Keyboard
Input to 16 Biphase Outputs)
3.5 Analog Keyboards
•
4
Bosch LTC 5136 AutoDome Controller
(compatible with LTC 8786)
SERVICE
If the unit ever needs repair service, the customer
should contact the nearest Bosch Security Systems, Inc.
Service Center for authorization to return and shipping
instructions.
Service Centers
USA: Phone:
800-366-2283 or 717-735-6638
fax:
800-366-1329 or 717-735-6639
CCTV Spare Parts
Phone:
800-894-5215 or 408-956-3853 or 3854
fax:
408-957-3198
E-mail:
BoschCCTVparts@ca.slr.com
Canada:
514-738-2434
Europe, Middle East & Asia Pacific Region:
32-1-440-0711
For additional information, see
www.boschsecuritysystems.com.
EN | 10
DÉSAXL | Instruction Manual | Installation
5
INSTALLATION
5.1 Before Powering up the DÉSAXL
5.1.1
Ensure that the DÉSAXL is installed in a secure, temperature-controlled, dry location.
5.1.2 Ensure that the power source is the proper, stable operating voltage. Refer to APPENDIX A for
technical specifications.
5.1.3 Ensure that all external equipment and connections to the DÉSAXL are made.
5.2 Front Panel (Inside the DÉSAXL door)
1 System HDD LED
2 Run LED
3 System Power LED
4 Secondary Power Switch
5 USB Port
6 Floppy Disk Drive
7 Removable OS Drive
8 DVD-writer
7
1
2
3
6
4
5
Bosch Security Systems | November 17, 2004
8
EN | 11
DÉSAXL | Instruction Manual | Installation
5.3 Rear Panel
1 Camera BNC Inputs (1-16)
12 Mouse Port (Green)
2 Looping Port and Termination Switches
13 Keyboard Port (Purple)
3 Watchdog Card
14 COM 1
A. External Monitor Output
15 USB Ports
B. RS-422 Output
16 Audio Out (Light Green)
C. DIN Connector (Connect to COM 1 with
17 PC Monitor Port (Blue)
Watchdog/PTZ Cable)
18 Microphone In (Pink)
4 SCSI Port
19 LTC 8508/01 Looping Cable
5 Sensor and Control Connector Blocks
20 Grounding Shield Lug*
6 Printer Port (Pink DB-25)
7 IEEE-1394 Port
*NOTE: Twisted shielded cable is required for all
8 Ethernet Port
sensor inputs and auxiliary outputs.
9 Audio In (Light Blue)
10 Primary Power Disconnect Switch
11 Power Cord Receptacle
1
2
3
4
Shield
20
A
5
6
11
10
7
B
8
9
12
16
13
14
19
Bosch Security Systems | November 17, 2004
15
18
17
C
EN | 12
DÉSAXL | Instruction Manual | Installation
5.4 Basic Connections
5.4.1 Connect cameras to BNC inputs labeled
1-16 or 1-8.
5.4.2 Connect the power cord (Ensure that the
Primary Disconnect Switch is in the OFF
(O) position).
5.4.3 Connect Ethernet cable (if used; not supplied).
5.4.4 Connect Speakers (if used; not supplied).
5.4.5 Connect Microphone (if used; not supplied).
5.4.6 Connect Audio Source (if used).
5.4.7 Connect External Monitor (requires
BNC-RCA adapter; not supplied).
5.5.3 Connect the 2-conductor shielded biphase
wire from the AutoDomes to the biphase
output on the LTC 8786. The connections
are polarity-sensitive; (+) positive, (-)
negative, (S) shield. Use 18 - 2 twisted
shielded Belden 8760 or equivalent.
5.5.4 The LTC 8786 is recommended for use in
most cases, and supports 16 biphase outputs.
Control of AutoDomes should only be done
from an LTC 5136 or the GUI interface at a
time (not to be used simultaneously).
NOTE: The LTC 8786 DOES NOT need to be
reconfigured from the factory.
5.4.8 Connect PC Monitor (not supplied).
5.6 Connecting Other Manufacturer’s
Domes
5.4.9 Connect Grounding Shield Lug*
The DÉSAXL provides two types of PTZ output:
*NOTE: Twisted shielded cable is required for all
sensor inputs and auxiliary outputs.
•
RS-232 (typically connected to a converter)
•
RS-422
1. Top Pin (+) positive
5.5 Connecting Bosch AutoDomes
5.5.1 Requires the Bosch LTC 8786 to convert
from RS-232 to Biphase (if used; not
supplied).
5.5.2 Connect the supplied Watchdog/PTZ
control cable to the RS-232 input, on
the LTC 8786.
2. Middle Pin (GND) ground
3. Bottom Pin (-) negative
NOTE: The Watchdog cable must be properly
connected to COM 1 and the DIN connector on
the Watchdog Card.
5.7 Connecting Sensor Inputs
•
Connect one of the two conductors to the
proper sensor input 1-16 or 1-8.
•
Connect the other conductor to the (GND)
ground input of the sensor input.
5.8 Connecting Control Outputs
Bosch Security Systems | November 17, 2004
•
Connect one of the two conductors to the
proper control output 1-16 or 1-8.
•
Connect the other conductor to the (GND)
ground input of the Control.
DÉSAXL | Instruction Manual | Installation
5.9 Connecting the Watchdog Cable
The purpose of the Watchdog cable and card is to
provide:
•
Sensor Input Functions
•
Control Output Functions
•
PTZ Control
•
Watchdog Monitoring Functions
•
Remote Event Status
NOTE: The Watchdog cable must always be used so
the system functions properly.
5.9.1 Locate the supplied cable with the two DB-9
connectors, and one DIN connector end.
5.9.2 Connect the DB-9 connector end (that has two
cables going into it) to COM 1.
5.9.3 Connect the DIN (barrel connector) to the
receiver on the Watchdog Card.
5.9.4 Connect the DB-9 connector (with a single
cable) to a PTZ converter box (if used).
Bosch Security Systems | November 17, 2004
EN | 13
DÉSAXL | Instruction Manual | Initial DÉSAXL Power-up
6
INITIAL DÉSAXL POWER-UP
Once all appropriate connections to the DÉSAXL have been made, begin the power up process:
• Turn on the Primary Power Switch on the rear panel of the DÉSAXL.
• Briefly push and release the Secondary Power Switch on the front panel of the
DÉSAXL.
6.1 DÉSAXL Launch Screen
• The DÉSAXL will immediately start and launch the DÉSAXL application.
• The following screens appear while the DÉSAXL application is loading.
6.2 First Time Login
6.2.1
Once the DÉSAXL application has launched,
login to operate the system.
6.2.2
6.2.3
Click Login.
The default User Name and Password for
Administrator is ‘desa’ / ‘desa’ (lowercase letters).
The DÉSAXL application login button now
displays logout.
6.2.4
6.2.5
Click Setup and select the Passwords Tab. Enter a
new DÉSAXL User Password immediately. This is
covered in SECTION 8.9.
NOTE: DO NOT leave the DÉSAXL password as the default.
Bosch Security Systems | November 17, 2004
EN | 14
DÉSAXL | Instruction Manual | Initial DÉSAXL Power-up
EN | 15
6.3 Initial Power-up Administrative Access
Initial Power-up: The DÉSAXL runs on a Windows XP Professional Platform, and starts up under the DÉSAXL
User. In order to make any changes to the operating system, including the IP Address, you must logoff, and
login as the Administrator.
To Login as the Windows ADMINISTRATOR:
6.3.1
Login to the DÉSA Application as the Administrator.
6.3.2
Exit the DÉSA Application as follows:
Push and hold CTRL/ALT/SHIFT, and then F4 to exit the DÉSA Application only if
you are the Administrator.
6.3.3
Click START and logoff. When promted, if you are sure, click logoff and IMMEDIATELY hold down
the left SHIFT key.
6.3.4
The logon to Windows dialog appears.
6.3.5
The Username and Password are as follows:
a. Username: administrator
b. Password: desa
6.3.6
Windows will logon as the Administrator and immediately prompt for a new password. This is
recommended for security reasons.
a. Username: Administrator
b. New Password:
WARNING: If you forget your Windows password, a recovery procedure will be required to reset the
default password.
Bosch Security Systems | November 17, 2004
EN | 16
DÉSAXL | Instruction Manual | Main Screen
7
MAIN SCREEN
7.1 Live Display Buttons
1. Quad
2. Five Plus One
1
2
3
4
5
6
7
8
3. Three By Three
4. Eight Plus Two
5. Twelve Plus One
6. Four By Four
7. Full Screen
8. Sequence
7.2 Storage Indicator
There are two parts to the Storage Indicator:
1. Total Space is the total amount of storage available on the system.
2. Free is the amount of free space available before the video starts to
Recycle (Overwrite).
7.3 Time and Date Display
Displays the current time and date of the Server.
NOTE: Do not change the time and date of the server while the DÉSAXL application
is running. Close the DÉSAXL application before making any changes. (Refer to
SECTION 6.3)
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Main Screen
EN | 17
7.4 Camera Indicators
When depressed, it indicates when the cameras are
recording.
7.5 Alarm Sensor Indicators
When depressed, it indicates when a sensor input has been triggered.
7.6 Auxiliary Control Indicators
When depressed, it indicates when the control output is
triggered (active). The auxiliary output can be manually activated by depressing the individual control button.
7.7 Search Button
This button opens the server Search screen.
7.8 Setup Button
This button opens the Setup menus.
7.9 Login / Logout Button
This button restricts access to the system functions, requiring a user name and
password to access the system. When logged out of the system, the functionality of
the system is restricted to the configuration of the Logout User.
7.10 Quit Button
Quit can only be used if the system user has been given permission in the Password
Setup menu, (SECTION 8.9), to exit the system.
7.11 Item Description In Cameos
C1, C2 etc. indicates the physical input on the system. The [ ] contains the
description of the Camera Setup, in the Hardware Setup menu.
7.12 Event Alert Button
The Alarm button on the Main Display flashes when there’s an alarm. Click Alarm
to open Log Records and allow comments to be made for each event.
7.13 About Button
This button displays the current version of DÉSAXL
Server Software.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Main Screen
7.14 Help Button
Click Help to open the Help window that contains basic user functions and
troubleshooting.
7.15 Location
The Location is found in the top center of the DÉSAXL’s main screen,
and displays information about the unit.
7.16 Server Code
The Server Code is found in the top center of the DÉSAXL’s
main screen, and is used by the remote software to identify
each DÉSAXL System. This code must be seven (7) characters
long, and unique for every unit.
Bosch Security Systems | November 17, 2004
EN | 18
DÉSAXL | Instruction Manual | System Setup Options
8
DÉSAXL SYSTEM SETUP OPTIONS (Setup Button)
Click Setup to initiate System Setup.
8.1 Integrated Keyboard
8.1.1 The Integrated Keyboard icon is located at the
bottom of the Setup screens, and eliminates need
for a physically connected keyboard after initial
setup.
8.1.2 The Integrated Keyboard stays open while moving
between tabs. When finished, the Integrated
Keyboard must be closed.
NOTE: At times, a keyboard may need to be
reconnected to the system, so be sure the supplied
keyboard is available for advanced system
configuration.
8.2 Save and Close Buttons
8.2.1 Save is used to retain any changes made in
each of the Setup menu tabs.
8.2.2 To save your changes, press Save before moving between tabs, and
before pressing Close.
8.2.3 Close is used to close out of the Setup menus, exiting to the Main Display.
8.2.4 Closing the Setup menu without clicking Save results in no changes being made.
Bosch Security Systems | November 17, 2004
EN | 19
DÉSAXL | Instruction Manual | System Setup Options
EN | 20
8.3 Hardware Setup Tab
8.3.1 Camera Setup
8.3.1.1
Use the Camera Setup section of the
Hardware Setup tab to Enable (Disable)
cameras connected to the system. Check
the box to enable camera input; uncheck
the box to disable camera input.
NOTE: Unchecking the box for a camera also disables
that camera in the Screen Division tab, and in the External Monitor section of the Hardware Setup tab. Re-enabling
the camera DOES NOT automatically re-enable these settings. The settings need to be manually restored.
8.3.1.2
Cam. ID enables logical numbering of every camera in the system; typically used when multiple
DÉSAXL comprise a large system. Cam. ID directly relates to AutoDomes connected to the DÉSAXL
system for control. The Cam. ID must match the address of the connected AutoDome.
8.3.1.3
Name allows a camera description to be associated with each camera. Character length is limited to
13 uppercase characters or 14 lowercase characters.
8.3.1.4
Sensor associates the physical sensors (alarm inputs) to a specific camera. Multiple sensors can be
associated with multiple cameras by separating the sensor numbers by commas i.e. 1,2,3, etc.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | System Setup Options
EN | 21
8.3.1.5
Motion associates motion activity to other cameras in the system, to record based on another
camera’s motion. Multiple cameras can be associated to multiple other cameras’ motion.
(Example - 2, 3, 4).
8.3.1.6
PTZ: If checked, designates that the camera connected is a PTZ type camera.
8.3.1.7
Type: If the PTZ box has been checked for any camera, the type of PTZ protocol to be used can be
selected. The default is Bosch biphase protocol. NOTE: Biphase and Pelco® protocols have been tested
and verified. All other protocols have yet to be tested.
8.3.1.8
The scroll bar on the right side of the display allows scrolling up or down to reveal additional
cameras.
8.3.2 Sensor (Alarm) Setup
8.3.2.1
Enable (Disable): If checked, enables an
alarm input; remove the check to disable
the alarm input.
8.3.2.2
NC/NO: Press NC/NO to toggle between
normally closed or normally open alarm
input.
8.3.2.3
Sound File: Any .wav file can be loaded into
the Wave folder in the following directory:
C:\DESA\Wav. This .wav file provides audible
indication that an alarm input has been
triggered (example - greeting.wav).
8.3.2.4
Recording Time By Sensor, Motion sets 1 to 60
seconds of global post-alarm recording once
an alarm has been triggered.
8.3.3 Control Setup
8.3.3.1
Enable (Disable) activates/deactivates the
designated Control Output.
8.3.3.2
Name designates a camera description to
be associated with each Control Output.
Length is limited to 13 uppercase
characters or 14 lowercase characters.
8.3.3.3
Auto ON/OFF Time: Setting an ON and
OFF time of day defines the period of
time (each day) during which the control
is activated.
8.3.3.4
Sensor (Alarm) associates the physical
sensor inputs to a specific Control
Output. Multiple sensors can be
associated with multiple auxiliaries, by
separating the alarm numbers by
commas i.e. 1,2,3, etc.
8.3.3.5
Dwell is the duration that the Control will be closed, once triggered by an sensor input. The
maximum is 9999 seconds, individually.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | System Setup Options
8.3.4 External Monitor
This screen is used to select cameras to be displayed on the analog monitor
output.
8.3.4.1
Dwell (Sec) is the time that each selected camera will be
displayed during sequence operation. Cameras are available
only if Enabled in Camera Setup.
Synchronize External Monitor: Once cameras have been added and
saved, press this button to reset the sequencing.
8.3.5 PTZ Camera Alarm/Preset Setup
8.3.5.1
This option can only be used if there is a camera with
PTZ selected in Camera Setup.
8.3.5.2
Press Alarm/Preset to display the Setup
screen.
8.3.5.3
Cameras with PTZ selected appear on the
left side of the chart, and across the top are
the sensors (alarm inputs).
8.3.5.4
Click the box intersecting the desired
camera with the appropriate alarm. A
dropdown box with 1-10 presets will appear.
Select the preset to be associated with that
alarm input.
8.3.5.5
The same preset can be assigned to as many
of the cameras or alarm inputs as desired.
Bosch Security Systems | November 17, 2004
EN | 22
DÉSAXL | Instruction Manual | System Setup Options
8.4 Motion Setup Tab
8.4.1 Camera Selection
Select the camera number to be set for motion detection, sensitivity, and individual camera adjustment.
8.4.2 Motion Detection Area
Use the mouse to draw the area in which activity is to be
detected. Up to five detection areas can be defined for each
camera.
Bosch Security Systems | November 17, 2004
EN | 23
DÉSAXL | Instruction Manual | System Setup Options
EN | 24
8.4.3 Motion Sensitivity
This setting adjusts the sensitivity of the detection area.
Sensitivity is global for all detection areas created.
8.4.4 Alarm(M)
When enabled (per camera), upon the occurrence of a
motion event, an audible alarm sounds from connected PC speakers. The Start and Stop times determine the
activation of notification. For example, an alarm can be set to be audible from 4pm to 8am, and silent from
8am to 4pm.
8.4.5 Area Clear/Area Draw
These functions quickly Draw or Clear the entire area for
motion detection activity.
8.4.6 Individual Camera Adjustment
Specify Color or Day/Night for each camera, by clicking
Color or Day/Night (a toggle button). The default for all
camera inputs is Color. Adjustments for Brightness, Hue, and
Contrast are also available for each camera. These options
affect the way the video is displayed and recorded. Click
Default to set Brightness, Hue, and Contrast back to zero,
and the camera type to Color.
8.4.7 Setup for All Cameras
Area Clear /Area Draw are the same as the previously
mentioned Area Clear /Area Draw, but affect ALL enabled cameras in the system.
8.4.8 Resolution
Options of recording resolution are 160x120, 320x240, or 640x480. As
resolution is increased, the size of the corresponding image file increases.
This will affect the number of days or weeks of video that can be stored on
the available hard drive storage. To determine the storage characteristics of a
particular DÉSAXL model, refer to http://www.boschsecurity.us.
8.4.9 Quality
The five (5) Quality settings are: 100%, 90%, 70%, 50%, and 30%. This setting
affects the amount of compression done on the recorded images. The lower the
setting, the blockier (more pixilated) the recording becomes. This also affects file
size and recording duration. As quality increases, recording duration decreases,
based on hard drive storage capacity.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | System Setup Options
8.4.10 Transfer Quality
Transfer Quality affects the amount of network bandwidth used, by compressing
the images requested from a Remote Client, for live display. This precompresses
the images before streaming to the Remote Client. The settings are 100%, 90%,
70%, 50%, and 30%. This setting does not have any affect on streaming video
being searched from the remote, only streaming video being viewed live at the
remote.
8.4.11 Color of Motion Area
The selections to visually indicate that motion has been detected are
Red or Green.
8.4.12 Full Screen When Motion
Select cameras in the dropdown list to cause those cameras
to display full screen when motion is detected. Set the
Dwell Time for the video to remain full screen. Once the motion
has stopped and the dwell time has expired, the video reverts to
the previous multiscreen display. Click No Full Screen to clear
the selected cameras from being displayed full screen.
8.4.13 Set Quad Dwell Time
On the main monitor display there is a button that allows
sequencing of the quad displays. This Dwell Time designates the
duration of the quad’s display (in seconds), before switching to
the next quad display.
8.4.14 Recording Frame Rate per Camera
The capability of maximum frame rate is based upon
your system and the number of cameras connected and
enabled. Click Default to maximize the total available
frame rate to all cameras. Adjust the frame rates by
clicking and holding the slide bar, and moving it up or
down (system specific limitations may exist).
Bosch Security Systems | November 17, 2004
EN | 25
DÉSAXL | Instruction Manual | System Setup Options
EN | 26
8.5 Schedule Setup Tab
8.5.1 Simple Mode Scheduling
Simple Mode provides one 24-hour period to schedule all days of the week. All time slots can be adjusted, down
to the second or up to an hour, by clicking the desired time frame and moving the slide bar up or down to the
desired time.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | System Setup Options
8.5.2 Advanced Mode Scheduling
Advanced Mode provides three 24-hour periods, based on Weekday, Weekend, and Custom, to set different
time frames for certain parts of the week.
8.5.2.1
Camera Selection
Selecting each camera allows independent scheduling of that camera and it’s own
24-hour time period.
8.5.2.2
Weekday
24 blocks are available for selection of recording type for that time
frame. Each block can have a different type of recording set. In Advanced
Mode, Weekday can have it’s own times to record or not record.
8.5.2.3
Saturday
24 blocks are available for selection of desired recording type for the time
frame. Each block can have a different type of recording set. In Advanced
Mode, Advanced Mode can have it’s own times to record or not record.
Bosch Security Systems | November 17, 2004
EN | 27
DÉSAXL | Instruction Manual | System Setup Options
8.5.2.4
Sunday/Custom
Twenty-four (24) blocks are available for selection of desired recording type
for that time frame. Each block can have a different type of recording set. In
Advanced mode, Sunday/Custom can have it’s own times to record or not
record.
8.5.2.5
Set Custom
Set Custom is directly related to the
Sunday/Custom schedule, but is saved as a
Custom schedule that can occur once, or
rotate on a Monthly or Yearly basis. Setup
the Sunday/Custom record schedule, and
click Set Custom. Select the Month via the
<< or >> arrows, click the day of the
month, and select Rotate. If Rotate is left as
None, it will occur on that day only, never
again. Once the Month, Day, and Rotate are
set, click Add to add it to the Custom List.
NOTE: Once the Custom Schedule has been set, you
must change the schedule back to the setup desired for
Sundays.
8.5.2.6
Time Settings
There are time settings that increment hourly, up to a
24-hour period. Clicking on a block with this time frame
opens a slide bar for adjustment from 1 hour down to
1 second. This provides full 24-hour scheduling
flexibility.
Bosch Security Systems | November 17, 2004
EN | 28
DÉSAXL | Instruction Manual | System Setup Options
8.5.2.7
•
EN | 29
Record Modes
C
Continuous
The Continuous record mode records the selected cameras continuously (nonstop).
•
M
Motion
The Motion record mode records based on any changes made in the camera view. There may be large
gaps in the recording time if no motion is detected.
•
Sensor (alarm)
S
Sensor record mode activates recording based on alarm input activation, for the duration set forth in the
Hardware Setup Tab for Alarm Setup.
•
Motion + Sensor
M:S
Motion + Sensor records based on activation from Motion and/or an alarm triggered input.
•
Motion + Prealarm
M:P
Recording based on Motion, adding an additional five (5) seconds of video prior to the Motion trigger.
The five (5) seconds is global and cannot be adjusted.
•
Sensor + Prealarm
S:P
Recording based on Sensor input activation, adding an additional five (5) seconds of video prior to the
Sensor. The five (5) seconds is global and cannot be adjusted.
•
Motion + Sensor + Prealarm
M:S:P
Combines the recording capabilities based on Motion or Sensor activation, adding the five seconds of
video prior to the Motion or Sensor recording triggers. The five (5) seconds is global and cannot be
adjusted.
•
None
NONE
If no record mode is selected, the specified camera will
not record. This could be used during down times when
recording is not necessary, to conserve storage capacity.
8.5.2.8
Copy To
Copy to is designed to speed the setup process of
the schedule. If you set up the schedule for one
camera, and want to copy it to either another
camera, or all cameras, click Copy to and select
the appropriate camera option to copy to.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | System Setup Options
8.6 Screen Division Tab
8.6.1 Selecting Screen Division
Select the Screen Division for setup or modification.
8.6.2 Camera Selection
Click the camera numbers to be displayed or not displayed in each
screen division. The darkened buttons are the currently selected
cameras; lighter buttons are unselected.
•
Large Screen Camera Selection
On screen divisions with the option of a Large Screen
display, choose the camera to show in that display.
Choose one of the selected camera buttons (darkened),
otherwise the chosen camera will not display.
•
Default and Default All
Default sets the selected screen division as the default.
Default All defaults all screen divisions, without making
any selections.
Bosch Security Systems | November 17, 2004
EN | 30
DÉSAXL | Instruction Manual | System Setup Options
8.7 Communications Setup Tab
8.7.1 Type of Connection
8.7.1.1
The two Types of Connections are:
•
LAN/PSTN/ISDN/Leased Circuit (Router), all means of
communications or
•
No connection. If selected, Remote Clients will not be able to connect to the local server.
8.7.1.2
8.7.2
Live Video Stream Bandwidth
There are five (5) bandwidth settings per connection:
•
256Kbps
•
512Kbps
•
768Kbps
•
1.5Mbps
•
2.0Mbps
Frequency of Call Out: The number of calls, in a 24-hour period, for the
system to communicate to a remote location.
Bosch Security Systems | November 17, 2004
EN | 31
DÉSAXL | Instruction Manual | System Setup Options
EN | 32
8.7.3 Emergency Setup
•
Select the Sensor for Emergency by depressing each
Sensor (Alarm Input) number (darkened) or
deselecting (light).
•
Emergency Phone can be used to dial out via a
modem (not supplied) to a Remote Client running
the DÉSAXL remote software. This option cannot
be used if emergency notification is via IP
Address (LAN). Two (2) phone numbers may be
entered.
•
Emergency IP Address may be via the Internet, LAN,
or WAN. Two (2) IP addresses may be entered for
remote notification.
•
Transfer Time is the time allowed for remote notification. If the transmission is not completed within the
designated time, the DÉSAXL will stop transmission in minutes.
NOTES: 1. A transfer time of 0 means the transfer time is unlimited.
2. Transfer time can be 1 to 60 minutes within a 24-hour period.
8.8 Server Information Tab
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | System Setup Options
8.8.1 Server Information
•
The Server ID is used for verification of remote and
backup connections. It must be seven (7) characters
in length, and be unique for each DÉSAXL.
•
The IP Address displays the current server IP Address
set up under Windows.
•
The Location, Model, etc. entries are for convenience,
to describe the unit.
•
The Main Display Configuration options configure the
appearance of the main screen.
•
Select from three Clock Display Formats available for
time/date display.
8.8.2
DÉSAXL Server Information
8.8.2.1
DÉSAXL Server Version is shown in the
following format: x.xx.
8.8.2.2 User Name displays the Windows Operating
System logon name.
•
Computer Name indicates the current
PC name.
•
Disk Drive indicates the current PC
configuration and hard drive space.
•
Computer indicates the processor type
and memory.
•
System refers to the Operating System
and Version.
8.8.2.3
Enable Intelli Search Tooltip
IntelliSearch is the graphical display shown
when using the server search screen. If
unchecked, the same type of search display
is shown as on the remote.
Bosch Security Systems | November 17, 2004
EN | 33
DÉSAXL | Instruction Manual | System Setup Options
8.8.2.4
Export/Import of Setting
•
Click Export to send a copy of the current
DÉSAXL settings to any specified drive. It is
recommended to specify a removable media type,
i.e. CD, floppy, etc. Assign a meaningful name to
associate to the current setup i.e. date, unit,
location, and click OK.
•
Click Import to import a system setup. This may
require insertion of removable media, i.e. CD,
floppy, etc. Select the file to import, and click OK.
Restart the PC or close and restart the DÉSAXL
application.
8.9 Password Setup
Bosch Security Systems | November 17, 2004
EN | 34
DÉSAXL | Instruction Manual | System Setup Options
8.9.1 Users
By default, there are two (2) users that cannot be deleted; LOGOUT
and DÉSAXL. There is no need for a password for LOGOUT,
however, the DÉSAXL user password can be changed for security
reasons. The DÉSAXL user is the Administrator, and has all privileges.
8.9.2 Adding and Deleting Users
•
Clicking Add User grays out all options until the User Name,
Password, and Confirm Password are entered.
•
Users can be deleted by selecting the user and clicking Delete. You
must have access to the Password Setup tab to delete passwords.
8.9.3 Setup List and Enable Camera
•
The Setup List shows all functions available to select
or deselect, per user.
•
Enable Camera allows enabling and disabling
connected cameras, for live viewing. Note that
disabled cameras still record.
Bosch Security Systems | November 17, 2004
EN | 35
DÉSAXL | Instruction Manual | System Setup Options
8.10 Audio Setup Tab
8.10.1 Audio Settings
•
The Audio save enabled checkbox allows/disallows single channel
recording of audio with associated video.
•
The Audio playback enabled checkbox allows/disallows playback of
the audio. Audio playback must be enabled in order to review
audio with associated video.
8.10.2 Camera
Select the Camera that is to have the audio recording associated
with it.
Bosch Security Systems | November 17, 2004
EN | 36
DÉSAXL | Instruction Manual | System Setup Options
EN | 37
8.11 System Setup Tab
8.11.1 System restart time
It is recommended, although not required, that the system be restarted on a regular basis, to free up resources.
This will occur weekly.
8.11.2 Watermark
Check or uncheck the checkbox to use Watermark, or not. Check
Display Watermark protect image for visual indication that
watermarking is enabled.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | System Setup Options
8.11.3 Backup
Click Backup settings to open the Setup Backup schedule screen.
Use this function to set a schedule for the system to backup on a
one-time, weekly, monthly, or yearly basis.
Bosch Security Systems | November 17, 2004
EN | 38
EN | 39
DÉSAXL | Instruction Manual | System Setup Options
8.11.3.1
Setup Backup Schedule
Click Add to add a schedule. The Add schedule window
below is displayed.
1.
Title is the name of the schedule being set.
2.
Date/Time is the desired time frame for the backup
to occur.
1
5
2
NOTE: Date/Time is limited to a 24-hour period, and
must be for future dates only.
ALERT!
Scheduled Backup will not overwrite when the storage
media gets full. Please ensure there is sufficient free space
before configuring and starting the backup at all times.
20 GB of free space is suggested for every hour of backup.
The Scheduled Backup will stop functioning if storage media
is full, and backup will not be completed.
3
If Scheduled Backup stops because storage media is full, to
resume the Scheduled Backup you must:
6
4
(1) Delete contents of the storage media,
7
(2) Delete the Scheduled Backups that were stopped, and
(3) Reconfigure all Schedules.
3.
The Rotate option is used to schedule a backup on a regular basis.
Options are: None (one time), Weekly, Monthly, and Yearly.
4.
Backup start time interval after options are Immediately, or from
1 to 4 hours. Backup time is set for after the End time/date.
5.
Media
Click Add media to open the Select backup media box. Select
any Local drive(s), or a Remote drive. For redundancy, multiple
drives can be set as backup locations. The remote password
is the password of the operating system.
NOTE: To backup to a remote drive, the remote software must be
loaded and running (minimized), for remote connection to occur.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | System Setup Options
6.
Setup
Priority can be set to either Low or High. If set to Low, the system
will queue the backup. If set to High, the backup immediately
begins, before all other queued backups.
7.
Add and Cancel
Click Add so the schedule will take effect.
If unsure of the scheduling process, click Cancel
8.11.3.2
Delete Schedule
To Delete an existing schedule, select the schedule to be deleted from the
list and click Delete.
8.11.3.3
Setup
Once backup schedule setup is complete, click Setup to enable the backup
schedule.
8.11.4 Video Loss Alarm
Video Loss Alarm can be enabled to trigger a control output and/or an audible
sound. It can also be enabled during certain times of the day.
NOTE: Controls must be enabled in the Hardware Setup tab to be
selected.
8.11.5 Hardware Setup
8.11.5.1 Watchdog Card Port
This port is assigned for communication between the software
and the Watchdog Card. It is recommended that this port
remain COM1.
8.11.5.2 Video Format
Options are NTSC or PAL. Typically, this setting should be
NTSC.
Bosch Security Systems | November 17, 2004
EN | 40
DÉSAXL | Instruction Manual | System Setup Options
EN | 41
8.12 Storage Setup Tab
8.12.1 Storage Setup
The Storage Setup screen shows the currently
allocated drives for the OS, and all video storage.
8.12.2 Modify storage structure
Click Modify storage structure to:
• Purge video that is already stored on the allocated hard drives.
•
Allocate new storage space for video storage. Example: To add a DVAD JBOD Array, once connected
to the unit, the drive space must be allocated for video storage.
NOTES:
• Arrays can be added without deleting any of the existing stored video.
• Only Allocation buttons for the unallocated space can be modified.
• The system must be shut down and rebooted to start modifications. This will delete all previously recorded
video and create a new video storage structure.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | System Setup Options
8.13 E-Map Setup Tab
8.13.1 Enable E-Map Check Box
E-Map must be enabled (via this check box) to be used.
8.13.2 Position No.
Select the position of the E-Map for any or all divisions,
then select the cameo position for the E-Map.
NOTE: The E-Map can be set up in one division, and then
copied to another division in any cameo location. The E-Map
will take up the camera position in the screen division.
8.13.3 Import Image
Click Find, which opens the Windows dialogue box to
allow search of any drive or media present on the system.
Once the directory is specified, click Go to load the
image.
NOTES:
• The image must be .BMP format.
• E-Map can only be used on the local Server; this feature is not available on the remote.
Bosch Security Systems | November 17, 2004
EN | 42
DÉSAXL | Instruction Manual | System Setup Options
EN | 43
8.13.4 Setting
Once the .BMP has been imported, to place
cameras on the E-Map, check the Camera radio
button, and select the camera number and desired
icon type for the camera. Repeat for Control and
Sensor. To delete an item from the E-Map, check
the Delete Camera, Control, Sensor radio button, and
click on the items to be removed. Check the Delete
Image check box to delete the loaded image when
Save is pressed.
8.14 View Log Records Tab
The system logs all activity by the user that is logged in. Click Export on the View Log Records screen to store
events to disk or removable media, in text format, for later review or archiving.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | System Setup Options
8.15 E-mail Setup Tab
1
2
5
6
7
3
4
8.15.1 Enable E-mail
1.
This checkbox should be checked to enable E-mail.
NOTE: E-mail Setup is required to be set up for this option
to be used in Intelliguard.
2.
Sending E-mail for Sensor
Select any or all sensors to send an E-mail to if the input is triggered.
3.
Video Loss: Notification via email when any camera
displays Video Loss.
Bosch Security Systems | November 17, 2004
EN | 44
DÉSAXL | Instruction Manual | System Setup Options
Server Status
4.
•
Send E-mail: Check this checkbox to send a Server Status E-mail.
•
E-mail Transmission: Set the frequency that the Server Status should be sent, in a 24-hour period.
•
Include image of: Select the Camera image to send as a JPEG to the E-mail address.
•
E-mail Title: Enter an optional E-mail Title for the Server Status E-mail.
5.
Send To
•
E-mail Address: Enter only one E-mail address.
E-mail
•
E-mail Transmission delay: Set a delay in seconds to
delay E-mail transmission.
•
Threshold: The time after the delay, to allow the
transmission to go through.
6.
Send From
•
Name (optional): This option describes the system
that the e-mail is coming from (ie. DESA-01).
•
E-mail Address: The sending E-mail address.
7.
SMTP Server
•
IP: Can be either the IP address of the SMTP
Server, or the account (ie. mail.comcast.net).
•
Port: Typically 25, but can be changed to the
appropriate port of the SMTP Server.
•
Logon method: Select the type of authentication or
user access.
None
1.
•
Logon Auth.: Authenticates with your ISP login.
2.
•
Logon Plain: Authenticates to the Windows Username and Password.
3.
•
Logon Auth.:
Logon Plain:
User Name: The User Name and Password are those used to access the SMTP Server.
Bosch Security Systems | November 17, 2004
EN | 45
DÉSAXL | Instruction Manual | System Setup Options
8.16 Smart Shield
Smart Shield functions are: Surveillance (without POS installed), and Count (only installed with POS).
Bosch Security Systems | November 17, 2004
EN | 46
DÉSAXL | Instruction Manual | System Setup Options
#
Name
EN | 47
Function
1
Surveillance
Surveillance allows six (6) independently configurable areas of detection to be set.
Each area can be configured to send an E-mail, make a phone call, play a sound
file, and trigger a control output.
2
Control Out
Allows the activity to trigger a Control Output.
3
Area No.
Displays the area of detection currently being configured.
4
Send E-mail
E-mail Setup must be configured for E-mail to function. Refer to E-mail Setup (in
this manual).
5
Audio Dial Out
If a modem is connected to the system, the system can dial out to a remote PC
with the DESA remote running.
6
Never Update Background Background of the detection area does not refresh.
7
Name
Assign a name to the detection area.
8
Background Refresh Time
Seconds of time to refresh the image being captured.
9
Detection Size
The number of pixels used for detection of an object.
10 Detection Sensitivity
Sensitivity of the pixel area of the Detection Size.
11 Sound Wave File
Select a .WAV file to be played if an object is detected.
12 Duration of Sound Wave
Duration that the sound should play.
13 Set Active Time
Click to allow a specific time to be set for the area to be active. This is set on an
hourly basis.
14 Reset & Add All
Click to delete all areas and selects the entire picture area.
15 Reset
Click to remove all items in the picture area.
16 Hide (or Show) Objects Click to display/Hide the pixel detection area.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | System Setup Options
EN | 48
8.17 Video Measure Tab
The Video Measure is a line of measurement for the height or length of an object. The line should be drawn in
the direction of the starting (lowest) measurement. Then select the Degrees and Units. If the ruler is to be
displayed in Live Mode, select the color of the line to be displayed and recorded on the video, whether it is
displayed or not.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Search
9
SEARCH
9.1 Search Button (from Main Display)
Click Search to open the Search screen.
9.2 Calendar
Year, Month, Days of the month, and Hour and Minutes of the day are displayed. Days
of the month are shaded three colors if the system has been recording for one day
or more.
9.2.1 Gray represents that there’s no recorded video for that day.
9.2.2 Red represents that there has been some type of recording for that day.
9.2.3 Yellow represents that there is recording for that day, which is the current
day, but another day is selected.
9.2.4 White represents that it’s the current day that is recording, and the current
day is selected.
Bosch Security Systems | November 17, 2004
EN | 49
DÉSAXL | Instruction Manual | Search
9.3 IntelliSearch Graphical Display
This graph displays the recorded information in detail
and gives a colored indication of what type of recording
occurred. The graph is based on a 24-hour period and
can be zoomed in by clicking on the hours at the top of
the graph.
9.3.1 The color bars depict the type of recording that
occurred:
•
Pink – Continuous Recording
•
Blue – Motion Recording
•
Red – Alarm Recording
•
Green – Pre-alarm Recording
•
None – Nothing has been recorded
9.4 Selecting Information Playback
To playback video, select the year, month, day, and
cameras to view. Click on the approximate time on the
graph, and the blue Start bar will move there.
Bosch Security Systems | November 17, 2004
EN | 50
EN | 51
DÉSAXL | Instruction Manual | Search
9.5 Screen Divisions Icons
Choose an icon to allow quick selection of multiple cameras for playback.
Icon
Function
Description
Panorama/Thumbnail
Search Icon
Click this icon to enable the Thumbnail Search. Select
one camera and the type of screen division that the
thumbnails will be displayed in. To deselect the thumbnail
search, click on the icon again to toggle it off.
Screen Resize Icon
If images are recorded at less than 640x480 resolution,
you can resize a lesser resolution up to 640x480. A single
image must be selected, by left-clicking inside the cameo.
Zoom In/ Zoom Out/ Move Left-click this icon to switch to the next type of icon.
During playback, when a camera is left-clicked on, it
Icon
enlarges to full screen. By right-clicking the image and
holding the button while moving, you can digitally zoom
in by using , zoom out using , or move around inside
the screen using .
Full Screen Playback
Click the Full Screen Playback icon
to view video
currently being played back, in full screen (without the
GUI interface). Single camera or multiscreen division
video playback is available full screen. Right-click screen
to return to GUI.
This allows for playback of a single camera or any of the
multiscreen divisions.
Refresh Icon
Refreshes the graphical recording display during a search.
Printer Icon
By connecting a printer to the system you can print image
directly to a printer. Left-click on the image to pull it full
screen. Once the image is full screen you can click on the
printer icon
and print the picture.
Backup Icon
Click to display the Backup screen.
Bosch Security Systems | November 17, 2004
EN | 52
DÉSAXL | Instruction Manual | Search
9.6 BackupScreen
1
3
2
4
5
6
7
8
9
1.
Type
Available backup types are:
•
SnapShot
To do a SnapShot, first left-click on the cameo to be backed up to pull it full screen, then click OK. NOTE:
This option only allows backup of images, not clips.
•
Encrypted
Select Encrypted to archive clips to some type of media. This option backs up all cameras for the selected
time.
•
AVI
AVI backup offloads video clips per camera, in a format readable on most computers.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Search
2.
Date/Time
•
Select the date and time for the video clips that are to be
offloaded.
Backup Media
3.
•
Click Select Media to open a drive selection box for
selection of local or remote drives.
Available drives are listed.
NOTE: Remote drive backup requires the remote software to
be loaded and running (minimized).
Bosch Security Systems | November 17, 2004
EN | 53
DÉSAXL | Instruction Manual | Search
•
Format CDR/CDRW
If using a CD as the media for a backup,
the CD must first be formatted. This option
is selectable from the Backup screen.
Once Format CD is selected,
Roxio
Drag-to-Disc utility launches. This utility will
format the CD for use as backup media,
ready for video clips. Insert a CD or DVD
and click ALT F to start the format process,
or click the menu icon and select Format
Disc. When prompted for a label, a
maximum of 12 characters, including
spaces, can be entered.
Bosch Security Systems | November 17, 2004
EN | 54
DÉSAXL | Instruction Manual | Search
4.
EN | 55
Option
•
Check the Delete old data when free space insufficient box to
automatically overwrite any drive that has previous archives.
•
Priority
Set the priority to Low or High to indicate when to backup, or to
put the backup into a queue.
5.
Click Calculate Size to ensure that the clip does not exceed the media size. If backing up as AVI, the
clip can be broken up into various clip sizes by selecting the Split By dropdown menu.
6.
Camera
Select the individual camera(s) to be backed up.
7.
Select Compressor
Select the AVI compressing method.
8.
AVI Caption
Specified area on screen for Camera No.,
Camera Name, Date Time, and Left Top to
appear.
9.
OK when satisfied with selection.
Cancel to exit without saving.
9.7 Bookmark
Click the Bookmark icon
on the Search screen to
set a bookmark for a certain point in the playback
screen. The starting point must be selected before
pressing the icon. The following screen will appear:
• Click Add to import the starting date and time,
providing for a description of the bookmark.
NOTE: If the added bookmark of a clip is overwritten,
the bookmark will no longer work.
• Click Delete to delete the selected bookmark.
• Delete All deletes all bookmark entries.
• Goto advances to the start date and time of the selected bookmark. Highlight the event with a left mouse
click. Left-click Goto, then left-click OK to close the box and view the date and time of selected video clip.
• Click OK to save the added bookmark.
9.8 Audio
Click the Audio icon
to disable audio playback or adjust the volume.
Bosch Security Systems | November 17, 2004
EN | 56
DÉSAXL | Instruction Manual | Search
9.9
Icon
Image Enhancement
Function
Description
Brightness
Adjusts the brightness for stored images.
Contrast
Adjusts the darkness of black and white shading.
Smoothness/Sharpness Smooths out the roughness/blurriness in the stored video image.
Noise Reduction
Eliminates noise stored in the video image.
De-skew
Corrects twisted or skewed video images by flattening or rotating the
images for better viewing.
Gamma
Adjusts the value between brightness and contrast, for correction of the
color of stored video, when abnormal.
Rotation
Consecutive stored image rotating, by 90, 180, or 270 degrees. The image
can also be flipped from the rotated angle.
Restoration
Returns the controlled video image (for each button) to its original
condition.
9.10 Index Search
The Index Search icon
selects certain types of recordings that have occurred for each camera. An index of
the events that have occurred is displayed.
Bosch Security Systems | November 17, 2004
EN | 57
DÉSAXL | Instruction Manual | Search
9.11 Index Search Panel
Use this option
to narrow a search to a certain type of recording.
9.12 Skip and Delay Sliders
By moving the SKIP slider in the positive or negative direction, frames can be
skipped for a faster search. The DELAY slider enables video playback at the
rate it was recorded, or slower.
9.13 Smart Motion Search
Smart Motion Search allows search for activity in a designated area of the selected camera
Icon
Description
Opens the Smart Motion Search window. Click this button to toggle the
Smart Motion Search On and Off.
Starts searching the selected area for motion activity.
Toggles the Smart Motion Search results screen On and Off.
Toggles the motion grid On and Off.
Toggles the selected pixel area marking On and Off.
Click Smart Motion Search to open the Smart Search window.
• Set the Start Time and End Time
and click Start Search icon
.
Bosch Security Systems | November 17, 2004
EN | 58
DÉSAXL | Instruction Manual | Search
Any motions detected, are shown as thumbnails. To show motions as text, click the Text icon
.
9.14 Remote Web Viewer
The Remote Web Viewer provides live video viewing from any DESA with Internet Explorer 5.5 or higher.
Connecting
To connect, enter the IP Address of the DESA recorder into the URL line of Internet Explorer. The following
screen appears, for entry of Site Code, Username, and Password.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Search
EN | 59
At the Security Warning screen, click Yes to load additional components:
Once connected, the following screen appears. Select the camera(s) for viewing by clicking the appropriate
numbered button(s) at the bottom of the screen, and click Live.
NOTE: All available cameras will be automatically selected and displayed LIVE.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Remote Client Guide
10
EN | 60
DESAXL REMOTE CLIENT GUIDE
10.1 System Requirements
• Processor:
Pentium® III, Pentium 4 or AMD; minimum for Drag and Drop feature 1Ghz
• Memory:
256MB RAM minimum; 512MB recommended
• Video:
32MB dedicated video RAM minimum; 64MB recommended. Recommended graphics
boards are ATI Rage or RadeonTM, or nVidia® gForceTM. The software does NOT support
video cards based on the SiS or RivaTM TnT2 chipsets.
• Monitor:
SVGA or XVGA, set to 1024x768 resolution at 60Hz refresh rate
• Hard Disk:
500MB free disk space
• Operating Systems: Windows 2000 Professional SP3 or Windows XP Professional.
• Browser:
Internet Explorer 5.5 or greater
NOTE: When installing the Remote Client software, it is important to upgrade Windows Scripting to Version 5.2 or
greater. Versions below 5.2 cause installation issues.
10.2 Loading the DESAXL Remote Client
The software is located on the DESAXL Client Software CD, contained in the two-CD package supplied with
the unit.
• Insert the CD. If Autorun is enabled on your PC, the install application will automatically launch. If
not, click Start/Run and browse to the CD drive containing the disk. Select the Autorun.exe file and
Click Open, then OK to launch the installation application.
• Click Remote to launch the InstallShield application to install the Remote View Client. If a previous
version of Remote Viewer is already installed, remove this version prior to installing the new version.
• Follow the next installation instructions throughout the DESA Remote Setup screens, clicking Next as required,
and Finish when notified of successful completion.
• Initial launching of the DÉSAXL Remote Client
Double-click the DÉSAXL Remote icon on the desktop (also accessible via Start/Programs/Startup).
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Remote Client Guide
EN | 61
10.3 DESAXL Remote Display
The buttons at the right of the screen provide functions in both the Connected state and the Disconnected state.
• LIVE is available when the Remote Client is connected to at least one DÉSA Server. When activated, the
button changes to STOP.
• SEARCH Before connection, searches video backup on the remote computer (or CD/DVD). After
connection, searches video on the local DÉSAXL.
• SETUP (see SECTION 10.3.1 for further information)
Before connection, configures Remote Client software. After connection, allows modification of a subset of the
DÉSAXL Server settings.
• CONNECT / DISCONNECT to the active DÉSA Server’s live feed.
• MULTI-SITE is only applicable when the remote station is connected to more than one DÉSA Server. This
function allows to clicking and dropping cameras from among the various servers, onto the remote view
screen.
Bosch Security Systems | November 17, 2004
EN | 62
DÉSAXL | Instruction Manual | Remote Client Guide
10.3.1
Setup Button (before connection)
Setup is done while no connection is active for a DÉSA
Server.
10.3.1.1
About DÉSAXL Remote Tab
Provides a summary of pertinent system information.
10.3.1.2
Setup Configuration Tab
1
2
3
4
#
Option
Description
1
Modem Connection,
When checked, the DÉSAXL automatically re-establishes the modem connection, in the event it is
Reconnect Automatically lost. A designated number of connection retries cab be indicated.
2
Display Auxiliary Status
BAR
For a connected server, this shows/hides the Alarm and Auxiliary icons below the Camera icons .
3
Watermark
Watermarked is displayed in the view of searched video on the Remote Client.
4
Remote Video Recording Live video storage designation: on the remote PC (for later search and review), or streamed from the
server.
A. Record live video
If checked, video displayed during a remote connection is also written to the local hard drive
storage specified by the Select Drive setting.
NOTE: This consumes disk space at a fairly rapid rate, and may fill up local hard disk storage
if left connected!
B. Save recorded video on search
If checked, searched video is automatically written to local storage (same as Record live video).
Video that is recorded live, or in response to a search, is available for review via Search when
the Remote Client is disconnected from all DÉSAXL Servers.
C. Select Drive
Select Drive designates the storage location for recorded video. It is strongly recommended to choose
a drive other than the system drive of the Remote Client, to avoid filling up the system drive.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Remote Client Guide
10.3.1.3
EN | 63
Communications Tab - Types of
connection
• PSTN/ISDN (Public Switched Telephone Network /
Integrated Services Digital
Network) is the basic modem (dialup) connection.
PSTN is also referred to as POTS (Plain Old
Telephone Service): business and home phones.
NOTE: Some businesses use a local PBX phone
system, which may complicate modem
connections. A direct access phone line is
recommended.
• LAN (Local Area Network) may also involve an
ISDN line, but typically uses the newer DSL or
cable modem service.
If the PSTN/ISDN radio button is selected, the
following settings are available:
A. Installed modem name (automatically read from the Device Manager setting on the PC)
B. Initialization string (automatically provided from the modem configuration)
C. Port and Bps (automatically assigned by the PC).
If the LAN/ISDN radio button is set, connection is made using whichever Local Area Network is active per
Windows. This setting is also used for DSL or cable modem connections.
•
Regarding networks
The DÉSAXL is a network device. Some form of network is required between the Remote Client and the
DÉSAXL Server. When both are on the same Local Area Network (LAN), simply set the name and IP address,
and click Connect on the main screen.
Firewall, Network Address Translation, Router, Bridge, Modem, Cable, DSL, ISDN, LAN, and WAN are all
terms describing networks; each must be considered when connecting a PC to a DESA for remote video
viewing.
Connection to the DÉSAXL at a business location from a remote PC in an office or home can be more
complicated. A Cable/DSL router in the network configuration may be present, allowing connection sharing.
The firewall in the router setup must be turned off. Each brand of Internet sharing router is somewhat different,
but the firewall setup is usually an on/off setting.
IMPORTANT: Remember to re-enable the firewall setting after using use of the DÉSAXL Remote Client.
Leaving the firewall disabled may present a risk to the rest of the network.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Remote Client Guide
EN | 64
• For the Technical Support Staff
Units are set for dynamic IP addressing by default,
but the configuration can be set to static.
Firewalling
Units should work fine behind a firewall as long as
the proper ports are forwarded to the unit.
Remember that they are TCP ports, not UDP.
Ports Used
Site:
8080(user inputs), 8081 (video streaming)
Remote:
8083
P2P:
3001, 3005 (Two Way Audio)
Remote Controlled Backup:
8090 (Center)
10.3.1.4
Other Tab
• Clock display format
Use this dropdown box to select a clock display:
YYYY/MM/DD – Year/Month/Day
MM/DD/YYYY – Month/Day/Year
DD/MM/YYYY – Day/Month/Year
• Date and Time Display
The date and time display on the Remote Client reflects that of the PC; same as displayed in the lower righthand corner of the desktop.
NOTE: If the DÉSAXL Server is located in another time zone, the date time clock will be different than the time
displayed in the cameo while viewing live video. Time shown within the video display reflects the time of the
search, recorded video searching on the local server, or archives stored on the PC.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Remote Client Guide
10.3.2
EN | 65
Indicators
The Camera, Alarm and Auxiliary indicators are displayed at the bottom of the main screen at the time
of connection to a DÉSAXL Server. Each indicator has two states. The normal state is light blue; the
selected (active) state is a darker shade of blue. The darker shaded blue of the Camera indicators shows
cameras selected for live display or search. The darker shaded blue of the Auxiliary and Alarm
indicators show that an alarm state is present, or an auxiliary relay has been activated.
Nothing selected:
Cameras selected:
10.3.3
Two Way Audio Feature
This feature allows the operator at the DÉSAXL Local Server to communicate verbally with an operator at a
connected Remote Client. Both sites must have a microphone and speakers connected via Audio Connections
(see Audio Connections on the DÉSAXL Local). The best communication is via PC headset, providing both
microphone and speakers, hands-free to prevent external disturbances.
NOTE: Upon initiating the Two Way Audio Feature, local audio recording stops.
10.4 Remote Connection Instructions
To open the DÉSAXL Remote client software, doubleclick the icon on the desktop, then click Connect.
NOTE: Connection profile creation is required prior
to first time connection, as follows.
10.4.1Creating a connection profile
•
Click Add on the Connect Site-LAN screen.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Remote Client Guide
•
To Create a Group, click Group Add and enter a
text description (e.g., MyStores, Parking Garage,
etc.).
•
Enter the Local Code that matches the Local
Code on the target DÉSAXL Server (found on
the Local Information tab under Setup).
•
Enter a Local Name to be used as the name on
the Remote Client; it doesn’t need to match the
Local Code.
•
Enter the IP Address of the DÉSAXL Server
(required if the DNS Host field is blank). This
field is automatically filled when the DNS host
address is resolved to an IP Address.
•
Enter the User Name and Password, as assigned
by the Administrator.
This procedure adds a connection profile to the
list under the group named, and appears on the
Main Screen in the window titled Server Info. To
connect in the future, double-click Server Id in
the Server Info window.
10.4.2 To connect, open the group by clicking the plus
sign at the top left of the screen, select the
desired DÉSAXL Server, and click Connect.
The Connecting to Local window displays the
progress of the connection. If successful, the
window disappears and the name of the profile
and the IP Address appears in the Connection
List box in the lower left-hand corner of the
screen.
•
If connection fails, a Connection Failed message
appears, click OK to continue.
•
Setting up Multiple Locals.
For setup and connection of additional Local
Servers, repeat the prior instructions to create a
group.
There is a maximum connection limit of 16
DÉSAXL Local Servers from one Remote
Client. There is also a 16 Remote Client
connections limit per DÉSA Local Server.
Bosch Security Systems | November 17, 2004
EN | 66
DÉSAXL | Instruction Manual | Remote Client Guide
10.4.3
EN | 67
Multiserver Access
•
Connecting to Multiple Locals
Repeat the connection process using another IP Address.
•
Switching Between Locals
The lower left-hand corner of the screen shows
a scrollable list of each DÉSAXL that the
Remote Client is connected to. The Stop, Live
and Search apply to the DÉSAXL Server shown in
the connection window.
When scrolling the list, cameos for the stream
associated with each DÉSA show timestamps in
red characters. Other connected DÉSAXLs have
timestamps in white characters.
10.4.4
Connected Display
10.4.4.1 Connected Locals Display
To view video, select the desired cameras by clicking on each Camera indicator. Once the cameras have
been selected, click Live to begin video display. To add cameras, first Stop the video and select the
additional Camera numbers, then re-click Live.
The Receive Status bar shows the progress of the streaming video from the Local DÉSAXL to the Remote
Client. It will flicker faster or slower, depending upon network connection speed.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Remote Client Guide
10.4.4.2
Remote Search of the Local
1. Click STOP to exit LIVE viewing.
2. Click SEARCH to enter the Search menu shown below.
3. Select the day of the month to search by clicking on a day displayed in RED.
Use the up/down arrow keys to select the Hour and Minute desired.
•
Calendar Calendar Color Representation
The days of the month are shaded if the system has been recording for one day
or more.
1. Gray: No recorded video for that day.
2. Red: Some type of recording is present for this day.
3. Yellow: There is recording for this day, which is the current day, but
another day is selected.
4. White: The current day is selected and recording.
4. Select Camera to search by clicking the camera buttons. Camera
buttons indent when selected.
5. Click the PLAY arrow to start playback once date, time,
and cameras have been selected.
6. Skip Frames, increases the speed of playback. Select 1 to skip
some of the frames.
7. Delay of Frames slows playback. Increase the delay time to slow
playback.
Bosch Security Systems | November 17, 2004
EN | 68
DÉSAXL | Instruction Manual | Remote Client Guide
10.4.4.3
•
Backing up Video from DÉSAXL Local
A single screen shot may be saved to a floppy disk as either
BMP or JPEG:
1. Stop playback.
2. Click on a single Camera, for full screen view.
3. Click BACKUP, then the Floppy Disk icon.
4. Click OK to save the displayed image as either BMP or
JPEG, depending on the Remote Viewer.
•
Backup a clip of video as follows:
NOTE: The video is backed up in blocks of 66 MB. Time required
varies with hardware settings of the local DÉSAXL.
1. Stop Playback.
2. Ensure that the video is being displayed in Multi-screen mode.
3. Click on the Floppy Disk icon.
4. Select the Start Date/Time, and End/Date/Time.
5. Select the Backup Media, then click OK.
6. After a few seconds, a small VCR tape symbol should
appear at the top right-hand side of the monitor. Doubleclick this symbol to check the backup progress.
•
AVI backup requires the following steps:
1. Save a full backup clip, as above.
2. Disconnect from the local DÉSAXL, then click
SEARCH (See SECTION 10.4.4.4).
3. Select the Backup Media for saving the video.
4. Select the desired Date/Time.
5. Select the Cameras to be viewed, then click
PLAY.
6. Stop playback, click Backup, then the Floppy
Disk icon.
7. Now click the AVI radio button and choose the
individual Camera to be saved in AVI format.
8. Click OK, a small VCR symbol will appear
indicating that the backup is in process. This is
the only indication of progress during an AVI
backup.
Bosch Security Systems | November 17, 2004
EN | 69
EN | 70
DÉSAXL | Instruction Manual | Remote Client Guide
10.4.4.4
•
Disconnecting from a Local
To disconnect from the Local Server:
1. Click Stop. This changes its label to Live.
2. Click Disconnect.
3. When prompted, click OK to Disconnect.
10.5 Searching Archived Video
•
Search
Click Search to open the Search screen.
1
2
3
4
Search Mode Select - The Remote Client allows searching of archived video. Options are as follows:
1. Backup Data is used for video that was saved from the server to the internal HDD or removable media on
the Remote Client.
2. Removable HDD Drive Data is used for video the has been stored on a HDD that has been removed from
the server.
3. Server NowScreen is used for searching video that was recorded on the Remote Client when the Record Live
Video option is selected in the Setup Configuration of the Remote Client.
4. Server Search Data is used for searching video from the server. This option must be selected in the Setup
Configuration of the Remote Client.
Bosch Security Systems | November 17, 2004
EN | 71
DÉSAXL | Instruction Manual | Remote Client Guide
10.6 Remote Administration
Schedule tab (all functions)
The following server settings, can be modified via
Setup while connected. Follow the instructions in the
Local DÉSAXL Setup:
Server Information Tab (Server information only)
Hardware Tab
•
Camera Enable
•
Sensor Enable
•
Control Enable
•
External Monitor
Motion Tab
•
Sensitivity (by camera)
•
Motion as Alarm with temporal applicability
•
Area Clear & Area Draw
•
Individual Camera adjustment
•
Setup for all cameras:
A. Area Clear/Draw
B. Screen Size (resolution)
C. Quality
D. Transfer Quality
E. Color of Motion areas
•
Full Screen when motion, Dwell Time and No
Full Screen
•
Set Quad Rotation Time
•
Now Screen (captures current camera image
and stores on Remote Client PC)
Bosch Security Systems | November 17, 2004
Server System Tab
•
System Restart Time (automatic reboot of
server)
•
Emergency Phone, IP Address or DNS
•
Watermark
•
Server Backup Schedule
•
Live video stream bandwidth (Network
Throttle)
Other Tab (change screen division view at Server
only)
DÉSAXL | Instruction Manual | Remote Client Guide
EN | 72
Health Monitor:
The Health Monitor displays the status of a connected Server. To display status of a
connected Server, click the plus sign in the directory tree on the left-hand side of the screen, select a Server from
the list, and click Connect
. The display now shows status of Cameras, Control Outputs, and Recording.
NOTE: Memo and
System Log, found at
the bottom of the screen,
are not yet available.
Emergency Monitor:
The Emergency Monitor screen displays realtime events from the Servers. Remote
notification must be configured to enable this function.
IntelliUpgrader:
The IntelliUpgrader allows the Remote Client to upgrade any of the DESA Servers.
Click Package Select and select the location of the latest software, then click OK. Click Start Update to
connect to the selected server and start the update process. An update notification is displayed when the process
is finished.
Bosch Security Systems | November 17, 2004
DÉSAXL | Instruction Manual | Pocket PC VIdeo Viewer
K-Remote Backup Server:
11
EN | 73
Displays the status of a remote backup from the Server to the Remote.
POCKET PC VIDEO VIEWER
Utilization of the Pocket PC software requires a Pocket PC Handheld device running Pocket PC 2002 or higher.
To install the Pocket PC application, your Pocket PC must be docked in it’s cradle. The required software can be
found on the Client CD supplied with the system. Insert this CD into the CD-ROM drive. Browse to the PDA
folder and double click DESA Pocket PC.exe to launch the Install Shield for the Pocket PC application. Enter the
location of the Pocket PC to be installed.
Once the software is installed on the Pocket PC, configure it like the Remote Client Software.
1. To launch the DESA Pocket PC application for the first time select, Start/Programs/File Explorer/Program
Files/Desa/Desa.
2. Select Remote/Connect and click ADD.
3. A default Group is created, or create a new group.
4. Enter Server ID.
5. Enter the Name of the Remote location, Server location, or another descriptive name.
6. Enter the IP Address, Subnet Mask, and Gateway.
7. Enter Username and Password.
8. TYPE should be left as Auto Detect.
9. Click OK.
10. Select the Server just created, and click Connect.
NOTE: Make sure that a connection is established with the Wireless Access Point before trying to connect. This
requires the Pocket PC to be configured to communicate with the wireless LAN before a connection to the
DESA can be established.
Bosch Security Systems | November 17, 2004
EN | 74
DÉSAXL | Instruction Manual | APPENDIX A
Specifications
Electrical
Model
DR2xxxxxx
Composite Output
Full Screen/Sequencing
Power Supply
Pentium-4 Power Supply
Selectable Full range 115-240 VAC 60-50 Hz
Display (Max) FPS
120 or 240
560 W (Max)
Video Input-Cameras
1 to 8 or 1 to 16
It is highly recommended to use a UPS
Digital Audio Recording
1-channel
(Uninterruptable Power Supply)
External Alarm
4/4 or 16/16 (Input/Auxiliary Output)
Video
SVGA Display
1024 x 768
Display Resolution
160 x 120, 320 x 240, 640 x 480 NTSC
Standard HDD
250, 500, 750, 1000 GB
Input
1 Vp-p composite video signal, 75 Ω
Memory
1 GB
Composite Output
1 Vp-p composite video signal, 75 Ω
Recording Resolution
320 x 240 / 120 FPS or 240 FPS
SVGA
One (1) DB 15
Audio
*1-channel (line in, mic in, line out)
640 x 480 / 120 FPS (maximum)
Average Record Days Disk format (GB) / Recording Speed (FPS)
DR2161xx
Total
Continuous
15% Motion
FPS
Recording
Recording
*Line level inputs only
250 GB
16
60 days
290 days
.78 V RMS = 0dB@600Ω
250 GB
112
8 days
41 days
Connectors
1000 GB
16
250 days
1200 days
Video Input
BNC
1000 GB
112
35 days
171 days
Video Looping Out
AMP 34-pin header LTC 8508/01 cable
NOTE: The above record calculations are examples based on continuous or
Composite Video Output
RCA
motion at 15% recording, with 320 x 240 resolution, and an average of 3 KB file
Audio
1/8 in. mini phone jack
size at normal quality setting.
10/100/1000 MB Ethernet
RJ-45
4U Rack-mount Chassis
Dimensions
W x D x H: 17 1/4 in. x 21 in. x 7 in.
Alarms
Weight
25-55 lb based on model
Alarm Inputs
4 or 16 programmable N/O, N/C dry contacts
Alarm Outputs1
4 or 16 programmable output relays
Image Compression
Proprietary temporal compression
Hard Drive Capacity
8-channel
250-500 GB
16-channel
250-1000 GB
(Based on enhanced MJPEG and
Camera Inputs
8 or 16 BNC Type 1 Vp-p 75 Ω
H.263 compression technology)
Camera Looping Outputs
1
8 or 16-34-pin AMP Connector 1 Vp-p 75 Ω
Image Integrity
manually switched termination
Proprietary Codec, time/date stamp,
watermark authentication
With LTC 8508/01 Cable
1x supplied
VGA Card
Composite Output
Full Screen/Sequencing 1 V p-p 75 Ω
Resolution/Average File Size2
1
160 x 120/1.5 KB; 320 x 240/3 KB;
One (1) SVGA Monitor Output-1024x768
Display Rate (Max) FPS
120 or 240
Record Rate (Max) FPS
120 or 240
640 x 480/6 KB
PTZ Control
One (1) RS-422, one (1) RS-2323
output supplied
One (1) Audio Input
1/8 in. mini phono jack
One (1) Mic Input
1/8 in. mini phono jack
NOTES:
One (1) Audio Output
1/8 in. mini phono jack
1
One (1) RJ-45 Ethernet Port
10/100/1000 Base-T (Standard)
2
One (1) SCSI-2 Port
HD50 (Standard)
3
Specifications on next page
Average file size based on temporal refresh
LTC 8786/60 Series Data Converter is required for RS-232 conversion to biphase
NOTE: Biphase and Pelco® protocols have been tested and verified. All other
One (1) IEEE-1394 Input
Five (5) USB 2.0 Ports- 4/Rear, 1/Front
One (1) LPT Port
One (1) RS-232 COM Port
One (1) RS-422 Connector via Watchdog Card
Removable HDD
AGP 128 MB RAM
80 GB Operating System Only (Standard)
DVD/CD writer (Standard) Formats IR/IRW
One (1) Keyboard Port PS/2
One (1) Mouse Port PS/2
Bosch Security Systems | November 17, 2004
protocols have yet to be tested.
EN | 75
DÉSAXL | Instruction Manual | APPENDIX A
Remote PC Requirements
Processor
Warranty
®
Pentium III, Pentium 4, or AMD,
1GHz minimum
Memory
Video
3 years
Bosch Accessories (Optional)
256MB minimum, 512MB recommended for
LTC 8786/60 – RS-232 to biphase converter
Drag and Drop feature
S1363-BNC-RCA Converter
Dedicated AGP Graphics Adaptor,
DVAS
32MB RAM minimum (64MB recommended),
DVAD
32-bit color or better
CAUTION: Recommended graphics boards are ATI RadeonTM or NVIDIA®
Approved Accessories (Third Party Manufacturers)
GeForce . The software does not support video cards based on SiS or
StarTech.com (Starview) KVMs
RivaTM TnT2 chip sets, or onboard integrated graphics adaptor with shared
Any UPS (Uninterruptable Power Supply)
memory.
rated at 560W per unit
TM
Monitor
Hard Disk
SVGA or XVGA set to 1024 x 768 resolution
Norton AntiVirus™
at 60Hz refresh rate
McAfee VirusScan
500MB free disk space
Ordering Information
Use the chart below to create your part number, based on this
Operating System
Windows 2000 Pro SP3, or Windows XP Pro
Browser
Internet Explorer 5.5 or greater
example:
• DÉSAXL
DR2 16 2 25:
NOTE: When installing the Remote Client software, it is important to upgrade
• 16-channel
Windows Scripting to version 5.2 or greater. Versions below 5.2 cause
• 240 fps
installation issues.
• 250GB
Capacity
Mechanical
Rack-mount Dimensions 17 1/4inW x 21inD x 7inH
Rack-mount Weight
11.3 - 20.4Kg (25 – 55lb) based on model
Environmental
Temperature
Operating: 5° to 40°C (41° to 105°F)
Relative Humidity
0 to 90%, noncondensing
Product Regulatory Compliance
Electromagnetic Compatibility (EMC)
Complies with FCC Part 15 and ICES-003
Product Safety
# Channels
16
08
Product
DR2
16 Channels
8 Channels
IT 1000 GB (16-channel only)
75 750 GB (16-channel only)
50 500 GB
25 250 GB
16 2 50
DÉSAXL
2
120 fps
240 fps (16-channel only)
# Compression
Cards
DÉSAXL Part Numbering Structure
Complies with UL and CSA Standards
Windows® is a registered trademark of Microsoft Corporation.
Pentium® is a registered trademark of Intel Corporation.
Norton Antivirus™ is a trademark of Symantec Corporation.
McAfee is a business unit of Network Associates, Inc.
RivaTM is a trademark of RIVA Technologies, Inc.
ATI RadeonTM is a trademark of ATI Technologies Inc.
NVIDIA® is a registered trademark of NVIDIA Corporation.
GeForceTM is a trademark of NVIDIA Corporation.
Roxio® is a trademark of Roxio, Inc.
StarTech®.com Ltd.
Bosch Security Systems | November 17, 2004
Bosch Security Systems, Inc.
850 Greenfield Road
Lancaster, PA 17601 USA
Tel: 800-326-3270
Fax: 1-717-735-6560
www.boschsecurity.com
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven
The Netherlands
Tele +31 40 27 87113
Bosch Security Systems Pte Ltd.
38C Jalan Pemimpin
Singapore 577180
Republic of Singapore
Tel: 65 (6) 319 3486
© 2004 Bosch Security Systems GmbH
3935 890 48012 04-47 | Updated November 17, 2004 | Data subject to change without notice.
DESAXL is registered by Bosch Security Systems, Inc. in the US Patent & Trademark Office.
Roxio is a registered trademark of Roxio, Inc.