Accessories
DVS Thermostatic Mixing Valve
DVS mixing valves
2in1 DVS thermostatic mixing valve
TMV3 Thermostatic Mixing Valves
A highly advanced TMV3 approved thermostatic mixing valve for use
in basin, shower, bidet and high pressure bathfill applications (above
1 bar) .
The valve is designed to control the mixed water outlet temperature
to within +/- 2°c regardless of fluctuations in the temperature and
pressure of the hot and cold water supplies, and to shut the mixed
water outlet instantly in case of hot or cold water failure* .
It incorporates a unique purpose-built adjuster key so that standard
tools cannot be used by unauthorised persons to change the set
outlet temperature .
DVS mixing valve supplying mixed water to DVS tap
Supplied with 2in1 connection fittings incorporating a single check
valve to prevent cross flow, and disc type strainers, fitted upstream
of the check valves, to prevent the valve becoming contaminated . A
"dummy" valve blanking set is available (part no . HTEE 219 001) to
be fitted in place of the valve body to enable the installer to flush out
the system prior to commissioning .
Supplied with 4in1 service fittings featuring an isolating ball valve,
large surface area strainer, single check valve for crossflow
protection, and a gauge/flushing port for checking system
conditions or for connection of a flushing hose (part no . FLSE 100
001) to remove system debris prior to commissioning the
mixing valve .
*Supply conditions must remain within limits stated .
Disclaimer: All valves should be commisioned after installation
Features include:
•
•
•
•
•
t: 01803 529021
f: 01803 559016
w: www .dartvalley .co .uk
D214/TMV3/4
4in1 DVS Thermostatic Mixing Valve
Specifications
Factory temperature setting:
Temperature setting range:
Temperature, hot supply:
Temperature, cold supply:
Minimum hot to mix differential temperature:
Temperature stability:
Working pressure, static:
Working pressure:
Maximum pressure loss ratio:
Flow rate, minimum:
Flow rate @ 1 bar pressure loss:
41-43°c
38-46°c
52-65°c
5-20°c
10°c
+/- 2°c
16 bar max
0 .2-5
10:1
4 lpm
21 lpm
DVS Thermostatic Mixing Valve
Accessories
Accessories
Fully approved by WRAS under the TMV3 scheme to the DO8
specification for basin, shower, bidet, and high pressure bath
fill applications
Rapid thermostatic failsafe on either cold or hot supply failure
protects the user from extreme temperature dangers
Unique temperature adjuster tool prevents unauthorised
tampering
Provides extreme mixed water temperature stability under
changing supply conditions
Available in a vast selection of connection formats, including
standard 15 and 22mm compression, 15/22mm universal
compression
85
Accessories
Water Heaters
Heading
Hand Wash Water Heaters
Content
Thanks to their compact sizes, the range of Ariston electric water
heaters can be installed virtually anywhere . There are under-sink
and over-sink models to suit demands from low-usage single basin
installations, to heavy-usage 2-3 basin installations . Features
include:
•
•
•
•
•
•
•
•
•
•
•
•
Unvented cold water feed
Extra thick steel-plated tank
Pressure tested and double coated vitreous enameled
Large magnesium anode
CFC free polyurethanethermal insulation
Regulation thermostat equipped with safety thermostat
External temperature control
Heating indicator light
Front access for ease of maintenance
Simple installation
Suitable for serving up to 5 handwash taps
Does not require vented taps
Accessories
Left: Hand wash water heater
Zip Hydroboil
Zip Hydrotap
Unlike vending machines that dispense drinks at temperatures
significantly less than boiling point, Zip Hydroboil provides truly
boiling water at the touch of a tap so your beverages are always
piping hot .
Zip Hydrotap is an advanced instant boiling and chilled water
system that is far quicker, simpler and safer to use than any kettle .
This means that drinks made with Zip instant boiling water taste
so much better than drinks from a vending machine . And you
won’t have to put up with the limited choice of drinks that vending
machines provide, or the ongoing expense of costly consumables .
86
Water Heaters
Accessories
Simple to use, press the red lever for boiling water, blue for chilled
and also has the capacity to 'lock-on' for hands free water delivery .
With an exceptional flow rate for fast filling of cups and glasses and
a safety lock if required .
t: 01803 529021
f: 01803 559016
w: www .dartvalley .co .uk
Accessories
Dimensions
Not to scale
47
65
51
98
50
145
50
Valves and Valve Accessories
62.5
33
78
160
62.5
33
31
125
40
D214/TMV3/4/15/22
4in1 Thermostatic mixing valve - 15/22mm
24
26
70
38
58
D214/TMV3/2/15/22
2in1 Thermostatic mixing valve - 15/22mm
80
78
90
D178/12 .7MM
Standard 12 .7mm solenoid valve
(Commonly used with DVS
automatic taps) - 15mm
D184
Standard plastic solenoid valve
(Commonly used with showers and
DVS high security backplates) - 15mm
23
23
24
B
D213
Temperature blending valve - 15mm
77
50
D040
Restrictaflow valve - 15mm
80
D038
15mm Isolating valve - 15mm
D331
Y Strainer compression - 15mm
127
84
B
121
86
B
JG/MAN/2
2 Port push fit manifold
VEM/MAN/2
2 Port brass manifold
VEM/MAN/3
2 Port brass manifold
D191 and D191/22
Pressure regulator
Inlet: 3/4" BSP
Outlet: 15mm push fit
Inlet: 3/4" BSP
Outlet: 15mm compression
Inlet: 3/4" BSP
Outlet: 15mm compression
Available in 15mm or 22mm
Accessories
86
53
53
96
. . .continued on next page
t: 01803 529021
f: 01803 559016
w: www .dartvalley .co .uk
Dimensions
Accessories
87
Accessories
Dimensions
Not to scale
Hand Wash Water Heaters
100
D
Dimensions for 15 litre water heaters
20
Model
62
A
WHS/15L/US/2KW 345
WHS/15L/US/3KW 345
B
C
D
300
300
345
345
80
80
203
C
A
B
Zip Hydroboil
Dimensions for 1.5 litre model
B
G
D
C
Model
A
B
C
D
E
F
G
H
J
K
HS001
335
289
180
20
163
95
198
35
25
42
Dimensions for 3.0, 5.0, 7.5 litre model
A
Model
A
B
C
D
E
F
G
H
J
K
HS003
HS005/105
HS007/107
431
465
578
289
318
318
180
198
198
20
20
20
163
163
163
95
95
95
198
198
198
35
35
35
25
25
25
42
42
42
H
Cold inlet
J
E
F
K
Vent
Dimensions for 10.0, 15.0, 25.0, 40.0 litre model
Model
A
B
C
D
E
F
G
H
J
K
HS010/110
HS015/115
HS025/125
HS040/140
600
600
780
840
390
390
390
515
244
299
299
284
20
20
20
20
163
163
163
163
95
95
95
95
295
295
295
420
41
41
41
41
28
28
28
28
42
42
42
42
Zip HydroTap
48
130
Accessories
210
H
D
Model
BC150/175
BC100/125
BC60/85
88
Dimensions
Accessories
Power Rating
kW
2 .1
1 .8
1 .8
Maximum Chilled
Cups/hr
175
125
85
Maximum Boiling
Cups/hr
150
100
60
H
Dimensions (mm)
WxDxH
500 x 465 x 395
440 x 430 x 337
440 x 430 x 337
t: 01803 529021
f: 01803 559016
w: www .dartvalley .co .uk
Accessories
Price Guide
Other Products
Below are some of the other products that DVS supply, including
valves necessary for supplying mixed water to taps etc .
Valves and Valve Accessories
Profile - Not to scale
Code
Description
Price (RRP)
D214/TMV3/2/15/22
Thermostatic mixing valve 2in1 - 15/22mm
£52 .00
DS
A
D214/TMV3/4/15/22
Thermostatic mixing valve 4in1 - 15/22mm
£66 .00
A
£25 .00
A
Notes: Thermostatic mixing valves come with both 15mm and 22mm connections.
D213
Temperature blending valve - 15mm
Notes: Should only be used where safety thermostatic mixing valves are considered
unnecessary.
Restrictaflow in-line flow restricting valve - 15mm
£5 .00
A
D038
Isolating valve - 15mm
£3 .00
A
D331
Standard Y-strainer compression - 15mm
£12 .00
A
B
D040
Standard latching valves
D178/1 .2MM
6v DC ASCO valve (H262601BW) 1 .2mm orifice - 0-12 BAR - 15mm
£37 .00
A
D178/2MM
6v DC ASCO valve (H262602BW) 2mm orifice - 0-12 BAR - 15mm
£37 .00
A
D178/3 .2MM
6v DC ASCO valve (H262603BW) 3 .2mm orifice - 0-3 BAR - 15mm
£37 .00
A
D178/4MM
6v DC ASCO valve (H262604BW) 4mm orifice - 0-2 BAR - 15mm
£37 .00
A
D178/6 .7MM
6v DC ASCO valve (H262605BW) 6 .7mm orifice - 0-0 .7 BAR - 15mm
£37 .00
A
D178/12 .7MM
6v DC ASCO valve (SCXH210G202BW) 12 .7mm orifice - 0 .35-10 BAR - 15mm
£43 .00
A
Special applications
Please note: The D107 range of control systems all use 3W coils
D178/NC/4/12V
12v DC Normally closed ASCO valve 4mm orifice - 3W - 0-2 BAR - 15mm
£37 .00
A
D178/NC/7 .1/12V
12v DC Normally closed ASCO valve 7 .1mm orifice - 3W - 0-0 .7 BAR - 15mm
£37 .00
A
D178/NC/22/LP
12v DC Normally closed low pressure high flow ASCO valve - 3W - 0-1 BAR - 15/22mm
£85 .00
A
D178/22/6VL/LP
6v DC Low pressure high flow ASCO valve - Latching - 0-6 BAR - 15/22mm
£85 .00
A
D178/22/6VL
6v DC ASCO valve 19mm orifice - Latching - 0 .5-8 BAR - 22mm
£70 .00
A
D178/NC/15
6v DC Normally closed ASCO valve 15mm orifice - 0-8 BAR - 15mm
£43 .00
A
D178/NC/22/12V
12v DC Normally closed ASCO valve 22mm orifice - 0 .5-8 BAR - 3/4" BSP
£70 .00
A
D178/NC/28/12V
12v DC Normally closed ASCO valve 25mm orifice - 0 .5-8 BAR - 1" BSP
£97 .00
A
D150
Valve latcher
£50 .00
A
Notes: Enables manual operation of solenoid valve without requiring urinal control.
Useful for testing or commissioning purposes.
12v DC Plastic valve - Normally closed - For mains powered units
£26 .00
A
D184/6VL
6v DC Plastic valve - Latching - For battery powered units
£26 .00
A
£10 .00
A
Notes: 15mm. 3m wire and spade connectors incl.
D811/VALVE
WRAS approved side entry valve - Individual
Accessories
D184
. . .continued on next page
t: 01803 529021
f: 01803 559016
w: www .dartvalley .co .uk
Price Guide
Accessories
89
Accessories
Price Guide
Valves and Valve Accessories
Profile - Not to scale
Heading
Code
Description
Price (RRP)
JG/MAN/2/R
2 Port push fit manifold - 3/4" x 15mm - Red
£35 .00
DS
D
JG/MAN/2/B
2 Port push fit manifold - 3/4" x 15mm - Blue
£35 .00
D
£13 .00
D
£15 .00
D
Notes: Inlet: 3/4" BSP. Outlet: 15mm push fit.
VEM/MAN/2
2 Port brass manifold - 3/4" x 15mm
B
Notes: Inlet: 3/4" BSP. Outlet: 15mm compression. Includes fittings.
VEM/MAN/3
3 Port brass manifold - 3/4" x 15mm
B
Notes: Inlet: 3/4" BSP. Outlet: 15mm compression. Includes fittings.
D191
Pressure regulator - 15mm
£38 .00
D
D191/22
Pressure regulator - 22mm
£40 .00
D
Code
Description
Price (RRP)
WHS/15L/US/2KW
Undersink hand wash water heater - 15 litre - 2kW
£125 .00
D
WHS/15L/US/3KW
Undersink hand wash water heater - 15 litre - 3kW
£150 .00
D
Hand Wash Water Heaters
Profile - Not to scale
DS
D229
Kit A - 2 litre expansion vessel and non-return valve (required for all installations)
£40 .00
D
D230
Kit B - Preset 3 .5 BAR pressure reducing valve (required for all installations above 3 .5 BAR)
£35 .00
D
D231
Kit C - Discharge tundish (required for all installations)
£10 .00
D
Notes: Suitable for serving up to 5 handwash taps and does not require vented taps.
Hydroboilers
Profile - Not to scale
Code
Description
Price (RRP)
HS001
Zip Hydroboil - 1 .5 litre (9 cups) White Enamel - 1 .5kW
£572 .00
DS
C
HS003
Zip Hydroboil - 3 litre (18 cups) White Enamel - 1 .5kW
£660 .00
C
HS005
Zip Hydroboil - 5 litre (30 cups) White Enamel - 2 .4kW
£745 .00
C
HS007
Zip Hydroboil - 7 .5 litre (45 cups) White Enamel - 2 .4kW
£825 .00
C
HS010
Zip Hydroboil - 10 litre (60 cups) White Enamel - 3kW
£1020 .00
C
HS015
Zip Hydroboil - 15 litre (100 cups) White Enamel - 3kW
£1225 .00
C
HS025
Zip Hydroboil - 25 litre (150 cups) White Enamel - 3kW
£1502 .00
C
HS040
Zip Hydroboil - 40 litre (240 cups) White Enamel - 6kW
£1860 .00
C
HS105
Zip Hydroboil - 5 litre (30 cups) Stainless Steel - 2 .4kW
£815 .00
C
HS107
Zip Hydroboil - 7 .5 litre (45 cups) Stainless Steel - 2 .4kW
£910 .00
C
HS110
Zip Hydroboil - 10 litre (60 cups) Stainless Steel - 3kW
£1115 .00
C
HS115
Zip Hydroboil - 15 litre (100 cups) Stainless Steel - 3kW
£1360 .00
C
HS125
Zip Hydroboil - 25 litre (150 cups) Stainless Steel - 3kW
£1600 .00
C
HS140
Zip Hydroboil - 40 litre (240 cups) Stainless Steel - 6kW
£2110 .00
C
Code
Description
Price (RRP)
BC150/175
Zip HydroTap - Boiling and chilled water delivery (150 boiling, 175 chilled cups per hour)
£2916 .00
C
BC100/125
Zip HydroTap - Boiling and chilled water delivery (100 boiling, 125 chilled cups per hour)
£2550 .00
C
BC60/85
Zip HydroTap - Boiling and chilled water delivery (60 boiling, 85 chilled cups per hour)
£2139 .00
C
Accessories
Hydrotap
90
Profile - Not to scale
Price Guide
Accessories
DS
t: 01803 529021
f: 01803 559016
w: www .dartvalley .co .uk
90