6050-074-A-1-12 Post Kit

DoorKing Part Number
MODEL 6050/6100 POST MOUNT BASE KIT
2600-674
This kit is designed for the 6050/6100 model swing gate operators only. This kit bolts to the bottom of the operator and mounts
directly into a poured concrete foundation.
Kit Includes:
Hardware for Post Mount:
Support Plate
(2) 2 1/4” O.D. Threaded Support Posts
1 1/2” bolts
30” Crank Arm
60” Connecting Arm
Locking Pin and Padlock
(2) 1 1/2 inch bolts. For support plate.
1” bolts
(2) 1 inch bolts. For support plate.
(3) Non-slip nuts. For existing threaded
studs on bottom of operator.
r
ato
om
ott
of
er
Op
B
ort
pp ate
u
S Pl
Locking Pin
and Padlock
30”
k
ran
Arm
C
rm
rA
we
o
kP
an
00
Cr
1
0/6
5
60
0
10 et
/6 ck
50 Bra
60 te
a
G
Refer to the manual for complete installation instructions.
Illustrations are to inventory the post kit.
Hardware for Connecting Arm:
2 1/4 inch bolt, 3 washers, brass bushing and locknut.
60”
6050-074-A-1-12
ing
ect
Arm
nn
Co
Copyright 2012 DoorKing, Inc. All rights reserved.
120 Glasgow Avenue
Inglewood, California 90301 U.S.A.