Mitsubishi NZ2WL-EU Specifications

Programmable Controllers
MELSEC-L series
Little on size, Large on performance
The new L series has a small footprint and is loaded with features.
Simple!
Compatible with
Windows® 7
Simple
Convenience that fits in the palm of your hand.
The L series is the latest in a long line of MELSEC products renowned for
exceptional performance and rock solid reliability.
Get the performance, functions, and capabilities required for today's most
demanding applications in an incredibly small package.
MELSEC-L series greatly expands the range of functionality traditionally associated
with compact PLCs and through user-centric design, pushes the limits of ease of use.
USB
Display unit*1
Built-in I/O functions
SD Memory Card Slot
Built-in CC-Link
connectivity*2
Ethernet
Functionality
Performance
Capabilities
The CPU module contains a
diverse range of control
functions.
High speed, large memory
capacity CPU
Advanced capabilities
focused on improving
efficiency
A large variety of I/O types and
features are built-in for
convenience.
Due to an abundance of advanced
functionality, L series CPUs are
flexible enough to meet a wide
variety of needs.
The CPU has a basic operation
processing speed of 9.5ns*2 and
260k steps of program capacity are
available for complex programs and
equipment control.
The user-friendly display unit enables
routine operations to be made
without a computer. An SD memory
card slot is included as standard for
data logging and program storage.
Write programs and manage L series
controllers using GX Works2 and iQ
Works, the most advanced and
effective software for Mitsubishi
controllers yet.
*1: Option (Sold separately)
*2: Included with L26CPU-BT, L26CPU-PBT
Built-in I/O Features
P.5
Positioning
High-speed
Counter
Interrupt Input
General Purpose
I/O
Pulse Catch
Every L series CPU module comes with 24 points of built-in I/O that
support advanced features to meet challenges head on.
Built-in Connectivity
Ethernet
P.7
USB
SD Memory Card
CC-Link Ver.2.0*2
Convenient communication options and memory card storage are
included with every CPU.
CPU Features*2
P.8
Program Memory
Maximum number of I/O points
260 k steps
8192 points
Basic operation processing speed
Floating-point operation
MOV instruction
9.5 ns
0.057 µs
19 ns
L series raises the bar for performance specifications in a compact
PLC with 260k steps of program memory and a basic operation
processing time of just 9.5 nanoseconds.
Display unit
P.13
Multi-lingual Display
English / Japanese
Display Size
Multi-color Backlight
16 characters x 4 lines Green(Normal), Red(Error)
The display unit allows for quick troubleshooting
and diagnostic operations of the CPU and connected
modules.
Programming Tools
GX Works2
P.15
iQ Works
L series is compatible with the latest and most
advanced programmable controller engineering
software from Mitsubishi.
Compact Design
Integrated
backplane
P.9
Mount on standard
DIN rail
For extension
system
By eliminating the need for a separate backplane base unit,
system design flexibility has been improved and overall size
has been reduced.
Simple Motion Modules
P.47
Positioning
Speed Control
Torque Control
16-Axis
Interpolation
Synchronous
Control
Auto cam
generation function
Control sophisticated motion applications with ease using
proven and innovative features.
Analog Modules
P.39
Conversion Speed
Precision
20 µs/ch
±0.1%
Shorten takt times using high-speed analog conversion modules
that operate at 20µs per channel.
Temperature Control Modules
P.43
Heating-cooling
control
Peak current
suppression function
Self-tuning
function
Simultaneous
temperature
rise function
Selectable
sampling cycle
Temperature
input mode
Temperature control module with highly stable regulation performance.
Network Modules
CC-Link IE Field
P.59
CC-Link Ver.2.0
CC-Link/LT
Supports the FA network standard.
*The L26CPU-BT, L26CPU-PBT has CC-Link built-in.
GOT1000 Series
P.23
MELSEC-L
Troubleshooting
Function
Intelligent Module
Monitor
Backup and
Restore
Log viewer
function
Ladder Monitor
System Monitor
New GOT models have been designed with connection to L series
in mind. When used together, several template screens are
available to enhance their combined operational functionality.
INDEX
L series Features
P.5
Flexible
CPU
P.25
The L series has the ability to flex to meet your
application's requirements.
MELSEC L series has been designed with three key concepts in mind.
The first key is reliability.
I/O
P.33
Mitsubishi Electric products are world renowned for quality.
The second is ease of use.
We are committed enabling engineers and programmers to do their job as
efficiently as possible to reduce costs.
The third key is flexibility.
Analog / Temperature Control
P.39
L series systems expand to meet the application requirements without
wasting money or space.
Save on total costs by designing the system that is a perfect fit.
Simple Motion
P.47
Positioning
P.51
High-Speed Counter
P.55
Serial Communication
P.57
Network
P.59
L series Features
L series Built-in I/O Features
Every L series CPU comes with 24 points of built-in I/O standard. These I/O points are capable of many
functions usually reserved for separate modules. Save on system costs by using the built-in functions
rather than relying exclusively on additional modules.
The built-in I/O*1 comes in sink or source type format and may be chosen based on the application.
■ L series CPU Built-in I/O Functions
Positioning
High-Speed Counter
(Built-in control of 2 axes)
(Two channels built-in)
Pulse Catch
Function
Interrupt Input
General Input /
Output
Features
Positioning*2
Number of axes: Maximum 2 axes
Maximum speed: 200kpulse/s
High-speed activation: 30μs (Shortest activation time)
S-curve acceleration and deceleration are supported.
High-Speed
Counter*2
Number of channels: Maximum 2 channels
Maximum counting speed: 200kpulse/s
Open collector, Differential line driver input
High accuracy ON/OFF measurements with a resolution of 5μs
High precision PWM control up to 200kHz (High speed pulse output)
Pulse Catch
Number of input points: 16 points
Minimum input response time: 10μs
Pulse signals whose ON time is shorter than the scan time can be detected.
Interrupt Input
Number of interrupt points: 16 points
Built-in CPU provides high-speed processing.
All input points support interrupt inputs.
General Input
Number of high-speed inputs: 6 points
Number of standard inputs: 10 points
Minimum input response time of high-speed input: 10μs
Minimum input response time of standard input: 100μs
General Output Number of output points: 8 points
Output response time: 1μs or less
*1 The L02CPU and L26CPU-BT are sink type, and the L02CPU-P and L26CPU-PBT are source type.
*2 Points used by the positioning and high speed counting functions are fixed (as in A phase, B phase, near-point dog).
Custom points for these functions may not be assigned.
Easy setup of built-in I/O functions
Configuring built-in I/O functions can be done easily by setting parameters using the programming tool.
[Built-in I/O function example parameter settings]
Pulse Catch: 0.01ms (response time)
Interrupt Input: 1ms (response time)
[Positioning function example parameter settings]
Pulse Output Mode: CW/CCW mode
Rotation Direction Setting:
Current Value Increment with Forward Run Pulse Output
Built-in CPU positioning control function
[Positioning Function]
The built-in positioning function has a start time of just 30μs
with a maximum high speed output of 200k pulses per
second.
Furthermore, it supports S-curve acceleration and
deceleration for applications that require minimal machine
vibration.
[High-Speed Counter Function]
Two channels support the high speed counting function. The
differential line driver inputs support counting speeds up to
200k pulses per second.
5
[High-speed counter function example parameter settings]
Pulse Input Mode: 1-Phase Multiple of 1
Counting Speed Setting: 100kpps
Positioning
High-Speed Counter
OFF
ON
at work passing end
at work passing start
Sensor
(Pulse generator)
Sensor on time
(the time it takes
for the work
object to pass)
A(ON)
CPU
Using pulse measurement mode, where the input signal ON/
OFF time is 200μs or greater, highly accurate measurements
in units of 5μs or greater are possible.
For example it is possible to calculate length by knowing the
"work object passing speed" and measuring the ON time of
the sensor.
L series Features
High-Speed Counter
Make highly accurate measurements with a resolution of 5μs
Work object
A: Work passing start
B: Work passing end
B(OFF)
The ON time of the input
signal (minimum of 200µs)
can be measured precisely
to a resolution of 5µs.
High-speed counter
I/O
High-Speed Counter
High precision PWM control up to 200 kHz
■ Lighting dimmer control using PWM output
Overhead lighting dimmer control,
maximum load 250mA*2
Analog /
Temperature Control
Using the pulse width modulation control function of the high
speed outputs, cycle times as fast as 5μs can be created.
Simply input the ON time and cycle time to drive a wide range
of devices from lighting dimmer control, motors, and heaters
to precision inspection equipment requiring high resolution
performance.
PWM output
ON time
D=
D : Duty Cycle
: ON time
Simple Motion
Setting item
Setting Range
Description
PWM output
0 or 10 to
Set
the
ON
time of output pulse
ON time*1
10000000*1 (0.1μs)
PWM output
50 to 10000000*1 (0.1μs)
Set the cycle time of output pulse
cycle time*1
*1 The PWM output ON time must be ≤ the PWM output cycle time.
*2 In cases where the first six digits of the serial number are "120722" or later.
Previous serial numbers of the CPU module are applied to 100mA.
T : Cycle time
PWM output
cycle time
Program
Scan
Sequence
program
Time
I/O Refresh
Input signal
Rising edge
detection
ON for 1 scan
Pulse
catch input
Input detection is assured
CPU with built-in CC-Link network connectivity*1
*1 L26CPU-BT, L26CPU-PBT only.
CPUs with built-in CC-Link can function
as master or local stations.
Master
station
Serial
Communication
Local station  Master station
Up to 128 words*2
Network
L series CC-Link ready CPUs are compatible with the latest
generation of CC-Link devices and support connections with
over 1,000 different product types. Without adding a module,
these CPUs can perform high-speed communication with a
maximum of 128 words*2 between a master station and a
local station. CC-Link is the dominate FA network standard in
Asia and continues to gain support worldwide.
High-Speed
Counter
Typical PLC input devices are unable to detect pulse signals
whose ON time is shorter than the scan time or do not
occur during I/O refresh periods. The pulse catch function
allows these signals to be reliably detected and passed to
the sequence program. This function is different from the
interrupt input function in that it does not require any special
programming. Pulse catch inputs may be used in programs
exactly the same as traditional input (X) signals.
Positioning
Pulse Catch
Guaranteed input pulse detection
Local stations (Up to 26)
Choose from an extensive range of CC-Link compatible equipment.
Up to 64 devices can be connected.
*2 When the number of occupied stations is 4 and the extended cyclic setting is octuple in the
Remote net Ver.2 mode.
6
L series Features
USB port (Mini-B type)
Convenient communication and
storage options come standard
Ethernet port
Program, configure, and perform diagnostics on L series systems
using either the USB 2.0 or Ethernet connections. The SD Memory
Card slot has many uses including the easy backup and restore of
programs and parameters.
SD memory card slot
USB and Ethernet connections standard
Use the USB 2.0 interface or Ethernet to connect directly
at the instillation site. The Ethernet interface supports direct
connection with either a cross or straight LAN cable and does
not require any configuration of the PLC or PC to operate
(patent pending).
IP address setting not required!
PC
Ethernet
Direct connection with straight or
cross cable.
Easy connection through hub
All CPUs connected to the same hub can be searched and
displayed in a list.
By selecting the access target CPU from the list, it can be
connected to even if the IP address is unknown.
Ethernet
Hub
PC
Use GX Works2 to retrieve a list of
all CPUs connected to the network.
Precise time synchronization
Synchronize systems on an Ethernet network using an
SNTP*1 server. Highly precise time synchronization can be
achieved to enable simultaneous operations, quality control,
or error tracking.
*1 SNTP: Simple Network Time Protocol
7
SNTP server time
Synchronized with the server time
Ethernet
L series Features
Program-less device data transfer
■ Simple PLC Communication Setting
CPU
[Simple PLC communication function*1]
Using the programming tool, a simple parameter setting is
all that is needed to transfer device data such as production
information with no programming required.
This function makes it possible to easily establish
communications not only with L series, but also Q Series and
QnA/A Series controllers.
*1 C
PU module whose first five serial number digits are "13042" or later is required.
Item
Read
Transfer
Available
devices
Ethernet
Read
Write
Transfer
Set between 10ms and 65535ms (1ms unit)
Data send/receive is executed at the rising edge
(OFF to ON) of the specified device (X, M, B).
Setting No. Set between 1 and 64.
The maximum number that can be set for each setting No. is
Device
512 words. (Maximum points of a word device: 256 points +
points
Maximum points of a bit device: 4096 points)
The total of setting No. 1 to 64 is maximum 4096 words.
POWER
POWER
MODE
RUN
ERR.
USER
BAT.
BOOT
MODE
RUN
ERR.
USER
BAT.
BOOT
0
1
2
3
USB
L Series
Q Series
Ethernet
( Built-in
)
port CPU
Q Series
( +Ethernet
module )
3
5
6
7
8
9
9
A
A
B
C
RS-232
4
5
8
PULL
USB
6
7
PULL
PULL
0
1
2
4
PULL
Analog /
Temperature Control
Execution
Communication Interval
Request
Setting:
Contact
Data communication is also possible between the CPU
modules in which the parameters are not set.
(In that case, the data communication is done through the
CPU module in which the parameters are set.)
I/O
Communication
Write
Pattern
Description
Read the data of the specified destination device
(transmission source) to the specified device of the host
station (transmission destination).
Write the data of the specified device of the host station
(transmission source) to the specified destination device
(transmission destination).
Read the data of the specified destination device
(transmission source) and write it to another specified
destination device (transmission destination).
B
C
D
D
E
E
F
F
QnA/A Series
( +Ethernet
module )
SD Memory Card special features
Simple Motion
Use the SD/SDHC compatible memory card to quickly and
easily back-up the CPU programs and parameters.
The backups can then be just as easily restored or used to
program other CPUs. The memory card can also be used to
hold data captured with the data logging function*1.
*1 For details about the data logging function, refer to page 11.
Positioning
CPU Modules
Basic operation processing speed
Floating point
Single precision
operation speed
Addition instruction
Double precision*2
(E+)
MOV instruction
Program capacity
Total device capacity
L26CPU-BT,
L26CPU-PBT
9.5ns
L02CPU,
L02CPU-P
40ns
0.057μs
0.18μs
4.3μs
4.8μs
19ns
260k Steps
413k Words
80ns
20k Steps
93k Words
Serial
Communication
With a program capacity of 260k steps and basic operation
(LD instruction) speed of 9.5ns, L series CPUs have the
performance necessary for highly demanding applications.
Furthermore, the double-precision real number operation
instruction is also available to reduce operation errors in
complicated mathematical formulas.
*1 L26CPU-BT, L26CPU-PBT only
High-Speed
Counter
Incredible performance in a compact design*1
*2 Minimum value
Network
8
L series Features
Gain more flexibility with an integrated
system bus structure
Save space in control panels by utilizing the integrated system bus structure.
Flexibility in system design is made possible by choosing only the required
expansion modules for the application.
Expand L series systems with no base unit restrictions
L series modules do not require a base unit. The installation
space is not restricted by base size, and the system can be
installed with minimal required space.
Furthermore, the addition of modules to the system is not
restricted by the number of available base unit slots and
costs may be reduced due to the elimination of expansion
base units.
Control panel
Base unit not required!
Installation space is reduced in the control panel
Identify important information easily
Every L series module has the serial number printed on the
front surface of the module to allow viewing even during
system operation (modules do not need to be removed).
*Serial numbers can also be checked using GX Works2.
123450000000000-A
Function version
A serial number is printed
on the front surface.
9
L series Features
System expandable according to production equipment scale
Up to three extension blocks connectable to the main block
using branch and extension modules. A maximum of 40
modules*1 caters a wide range of production equipment and
line scale.
■ Example of largest system configuration of L26CPU-BT
10 modules
[ Main block ]
Number of extension blocks
Number of connectable modules*3
Up to 2 blocks
Up to 3 blocks
CPU
Branch module
Extension module
CPU module*2
L02CPU
L02CPU-P
L26CPU-BT
L26CPU-PBT
END cover
11 modules
[ Extension block 1 ]
Main block: 10 modules
Extension block: 11 modules
*1 In the case of L26CPU-BT and L26CPU-PBT.
Branch module
Extension cable
*2 C
PU modules whose first five serial number digits are 13072 or later.
When adding a branch module to a fully occupied block, shift one of the other
modules to a new block to give way to the branch module.
[ Extension block 2 ]
11 modules
[ Extension block 3 ]
11 modules
Analog /
Temperature Control
*4 Total number of I/O modules, intelligent function modules and network
modules, excluding branch modules.
Well-organized control panel with minimum wiring
*1 The total length of extension cables should be within 3.0 m.
: Branch module
■ Example of horizontal system configuration
: Branch module
: Extension module
Simple Motion
Branch module can be strategically placed in a block to minimize wiring space. Extension cables are available in 0.6-,
1.0- and 3.0-m. The maximum extension length is 3.0 m*1.
The extension cable is a one-touch type which can be easily connected and disconnected.
■ Example of vertical system configuration
I/O
*3 Total number of I/O modules, intelligent function modules, network modules
and branch modules.
The power supply modules, CPU modules, display units, extension modules,
RS-232 adapters and END covers are not included.
When the main block and
3 extension blocks are
used, 40 modules can be
connected in all.*4
: Extension module
Positioning
Wiring space is minimized by mounting the branch module before the END cover.
■ Example of vertical and horizontal mixed system
: Extension module
High-Speed
Counter
: Branch module
A system with both vertical and
horizontal layout can be
configured to match the
installation space.
Wiring space is minimized by mounting the branch
module next to the extension module.
Serial
Communication
The modules can be replaced according to the system configuration!
■ Mounting position when branch or extension module is used
Modules
Branch module
Extension module
Mounted block
Main block
Extension block
Main block
Extension block
Possible mounting position
Right side of CPU module or left side of END cover
Right side of extension module or left side of END cover
Impossible
Right side of power supply module
Network
Matching marks on
the slot and the cable
10
L series Features
Data logging function
The built-in data logging function provides an easy way to collect
information for troubleshooting, performance evaluation, and other
uses. The included configuration tool makes setting up the data
logging function a breeze with a step-by-step wizard like interface.
Using GX LogViewer, the captured data is easy to interpret and
understand.
■ Configuration tool
Select the logging type.
Make the desired settings on each screen and click
the [Next] button until all settings are complete.
High speed data sampling
The high speed data logging function has the power to synchronize with the sequence program scan, ensuring
that every value available to the program is logged for analysis. Using this method it is possible to perform detailed
operational analysis and identify existing or potential problems.
■ Generic sample data from a PC or external device at 100ms intervals
■ L series data logging function is capable of sampling data at
much higher resolutions to detect quickly changing values.
Abnormal values are detected
and clearly identified.
Rapidly changing values result in undetected errors
Measure value (Lseries)
Measure value (PC)
Measure value (PC)
Abnormal
range
0
100
200
300
Time [ms]
0
100
200
300
Time [ms]
Auto logging function
Data logging configuration settings are stored on the SD Memory Card and when the auto logging function is enabled,
data sampling will begin immediately after the SD Memory Card is inserted.
Even when data sampling is required at a remote location, it is easy to configure a logging settings file and send it to
the remote location via e-mail, for example.
The user then only needs to copy to the file to an SD Memory Card and plug it in. (Patent pending)
Example: Configure the data logging feature and capture data in a remote location
I'll send you the
logging setting file.
Thank you.
Send the file
On-site manager
System manager
Internet
Copy the file to SD Memory Card
11
Begin data
logging
By inserting the SD memory card,
the settings are read and the data
logging function automatically
begins sampling data.
■ File transfer feature* 1
Forward files to an FTP server to
manage the data collectively.
FTP server
Logging file is forwarded
CPU
Data logging files stored on the SD memory card can be
forwarded to an FTP server just by making a simple setting
with the LCPU logging Configuration Tool.
Maintenance and management work can be reduced by
batch-managing multiple logging files.
L series Features
Automatically forward logging files to an FTP server
Ethernet
Machine 1
Machine 2
Machine 3
*1 Using a CPU module with the first 5 digits of the serial number "12112" or later.
I/O
Easy-to-see graphical display
Sample data can be displayed using the dedicated software tool, GX LogViewer. The tool allows the user to freely
change colors, super-impose graphs, and use multiple color-coded cursors to instantly identify shifts in value and time.
Red cursor
Analog /
Temperature Control
Blue cursor
Simple Motion
Positioning
The difference in time and value between the cursors is automatically calculated and displayed.
Trigger logging function
High-Speed
Counter
By only recording data when abnormalities occur, even high speed data logging files do not occupy a large space on
the SD Memory Card. Perhaps more importantly, the process of investigating why the abnormality has occurred and
identifying solutions is greatly simplified.
Trigger occurrence
Serial
Communication
Data
(Condition of
equipment)
Time
Use SD Memory Card
space efficiently.
Only saving data necessary
for analysis enables quick
identification of the root cause
and restoration of normal operation.
Network
Only logging data
just before and
after the trigger
occurrence is saved.
Before trigger
occurrence
Trigger occurrence
After trigger
occurrence
To receive a copy of GX LogViewer, contact your local Mitsubishi Electric representative.
12
L series Features
Device monitor
Built-in I/O monitor
Feature rich and easy
to use display
Error message display
(Red backlight)
Check the system status and make setting
changes directly from the display. Error status is
clearly identified and troubleshooting and error
investigation can be performed all without the need
for any connections or engineering software.
Instant error information check
Error history and detailed error information is available directly from the display unit.
Error number, message,
and occurrence time and date
General error information
Detailed error information
Intuitive menu navigation
The menu navigation guide shows the current menu tree location and an arrow to indicate the scroll direction at the top
of the display.
Parent menu
Level navigation
When vertical scrolling is possible,
( , , ) arrows are displayed
Current menu
Selected item flashes
Multilingual operation
The display unit language can be selected (Japanese or English).
Choose the desired language
13
Japanese display
English display
L series Features
CPU
The L series has been designed from
the ground up to be easy to use
I/O
The L series module labeling design has been created to ensure clear legibility
and identification of information at glance to avoid mistakes.
Universal design
■ Regular Gothic font
0 1 2 3 4
5 6 7 8 9
ABCDE
0 1 2 3 4
5 6 7 8 9
ABCDE
The space indicated with a red circle
has been enlarged.
The numbers “3, 6, 8, 9” and the
alphabet “C” are clearly distinguishable.
Characters are legible even in small print.
Simple Motion
■ Font for L series
The characters are thick enough,
however the numbers “3, 6, 8, 9” and
the alphabet “C” are not clearly
distinguishable because the spacing
indicated with a red circle is not large
enough.
Analog /
Temperature Control
[Adopting a universal font]
A high visibility font has been chosen for characters printed
on system modules.
Positioning
[Module design]
White and red are used to distinguish inputs from outputs
respectively to allow for easy identification of terminal
connection type.
High-Speed
Counter
White for input module
Red for output module
Easily identify module status
LEDs display the current status of modules including run and error states.
Serial
Communication
Network
LEDs are located on the top
front surface of the modules.
14
L series Features
Increase productivity and lower the
total cost of ownership.
Introducing the next generation
of IA programming software:
GX Works2 focuses on driving down total cost by including features
that speed up commissioning, reduce downtime, improve programming
productivity, and provide strong security.
Compatible with
Windows® 7
User interface that is "easy to use" by design
The programming tool GX Works2 has been developed from the ground up to be intuitive for all users and allow
anyone to begin programming easily. The user interface and other functions provide a comfortable programming
environment that enables improvements in design efficiency.
Fully integrated intelligent function
module management tools.
Use tabs to easily switch between
programs, parameters, and other
screens.
Improve readability by hiding ladder
rungs not relevant to the current
operation.
Use "Watch windows" to
conveniently monitor pertinent
values.
Quickly identify each program and
its execution type.
Program titles help to identify the
content of each program.
Cross reference devices and labels
with ease.
Use the Inline-ST*1 feature to
quickly write complex expressions
in ladder programs.
*1 In-line ST can be only be created in projects that use labels.
15
L series Features
Time saving programming features
Ladders can be easily edited just by choosing from candidates of instructions and labels.
The information of arguments are also shown to reduce errors during ladder input.
Instruction options
Instruction details
Instruction usage details
CPU
I/O
Label data type
Hold down Ctrl and use the arrow keys (←, →, ↑, ↓) to draw and erase lines.
Use Ctrl + Shift + (←, →) to edit continuous lines.
 

Then press
+
Analog /
Temperature Control
Use
to draw a line down and automatically extent the ladder block.
+
+
keys to extend the line to the first intersecting object.
Simple Motion
Positioning
Crunch numbers easily in ladder programs
Example string operation
[Using only ladder]
[Using Inline ST]
[Using Inline ST]
Serial
Communication
Example numerical operation
[Using only ladder]
High-Speed
Counter
Using the Inline ST function it is possible to include structured text program code in ladder programs to simplify
numerical and string operations. Using Inline ST can save time in the program development process and is more
efficient with program memory.
Network
Only one line of code is required!!
16
L series Features
Use function blocks for common operations
Function blocks allow selections of commonly used code to be easily reused and shared among projects. Shared
or created function blocks can be added to a program using simple drag and drop operation. Using function blocks
effectively results in faster development times with fewer programming mistakes.
Use the function block
selection window to
find and import function
blocks to the program.
Drag and drop
Eliminate the need to input comments
[Sample comment import feature]
Sample comments are provided for the special relays/registers of the CPU as well as the buffer memory/XY signal of
the intelligent function module.
They can be copied as comments for the project and you do not need to enter them from scratch.
Comments can be easily utilized
by right-clicking menu.
■ Choose the intelligent function module to utilize comment
■ For X/Y comment
■ For buffer memory
Various ladder editor functions have been improved
[Bit-wise commenting of word devices]
A comment can be set for each bit of a word device and displayed on the ladder.
The comments of each bit in a word device may be displayed directly in the ladder diagram.
17
■ For special relay/register
L series Features
Easy project contents search
[Cross reference]
The cursor position can be used to automatically select a part of the program and perform a cross reference of
devices/labels and display a list of the relevant sections. Easily jump from the cross reference results to the relevant
parts of the program to confirm the locations.
CPU
Cross reference information for the device
at the cursor location is automatically displayed.
Label names may be
batch replaced.
 
+
F
I/O
■ Consecutive search
with Enter key function
While performing a find
operation, when the Enter key
is pressed the cursor will jump
to the next result.
The cursor moves to the first result for "Auto"
1

When the Enter key is pressed,
the next result for "Auto" is
selected.
(The cursor changes position.)
2
Analog /
Temperature Control
[Cross reference]
Jump to other parts of the program
by double-clicking the results.
3
Simple Motion
Offline debugging without physical hardware
The simulation function is now integrated. The program can be executed in a step-by-step method, finding program
errors more easily.
Debugging features can be
accessed using the toolbar.
Positioning
It's easy to begin debugging
High-Speed
Counter
Serial
Communication
Set breakpoints and confirm them in
the docking window
Debug programs using only a PC, no
connection to the actual hardware is
necessary.
Network
18
L series Features
Advanced PLC diagnostics
The diagnostics screen provides a wealth of
information about the currently connected controller.
The main screen allows the operational status of the
entire programmable controller to be seen at a glance,
allowing the immediate identification of problems.
Additional detailed information is available to help with
routine maintenance and problem resolution.
Jump to the module information screen
[PLC diagnostics]
[Module information]
Jump to the PLC diagnostics screen
[Built-in I/O monitor]
Jump to the error history screen
Time-stamped error history list
Simplify troubleshooting with a combined, time-stamped, error history list for the CPU and all expansion modules.
The details section provides explanations of error codes and suggested solutions.
Quickly identify the error, its cause, and solution
without the need to reference a manual.
19
Programmable Controller
Engineering Software
MELSOFT GX Works2
MELSOFT MT Works2
L series Features
Motion Controller
Engineering Software
HMI Screen Creation Software
MELSOFT GT Works3
CPU
System Management Software
MELSOFT Navigator
Next Generation Seamless
Engineering Environment
I/O
Robot Programing Software
MELSOFT RT ToolBox2
iQ Works is the combination of Mitsubishi engineering software (GX Works2,
MT Works2, GT Works 3, RT ToolBox2) that allows for the sharing of design
information to improve programming efficiency and reduce TCO.
Graphical Project Management
Analog /
Temperature Control
The entire control system is represented using the "Network
Configuration" and "Module Configuration" windows.
System components are easily added using a drag & drop
interface and the validity of the system can be confirmed
using the check function to ensure parameters are configured
correctly, the power supply is sufficient, etc.
Different project types can be grouped together (for example
by factory, line, and cell) for central management.
Simple Motion
Positioning
High-Speed
Counter
Batch Parameter Generation
Serial
Communication
Greatly reduce engineering time by letting MELSOFT
Navigator automatically generate the parameter settings for
each project based on the graphical system configuration
diagram.
With one operation, complex parameter settings for networks,
I/O assignments, and multi-CPU systems are done for you,
preventing mistakes and saving valuable time.
Additionally, programs and parameters from multiple CPUs
and GOTs can be read in one operation using the batch read
function.
Network
20
L series Features
MX Component
Easily connect personal computer
to PLC
MX Component is the Active X® control library enables communication
from a personal computer to a PLC regardless of communication protocol.
Complicated programs for serial and Ethernet communication can be
developed with simple steps.
Greatly improved development efficiency
The wizard style configuration utility facilitates access to the target PLC CPU. Once configured, the conditions are
saved. Then the PLC CPU can be accessed simply by specifying its station number.
➀ Set the communication conditions according to the Wizard. (Control for
configuration only with a program without using the Wizard is available.)
➁ Paste the MX Component control icon in the form, and set the
communication path number specified in ➀ as a property for the control.
➂ Then, describe the program for retrieving the device.
➃ Completed.
Data collection by VBA
Real time graph display application can be created
using VBA programming in Excel® and Access®.
Logged PLC device data can be collected and saved
in real time.
Remote monitoring and operation via Internet/Intranet
Remote PLCs can be monitored and operated from an ASP web page created with VB Script. Such web page can be
accessed from personal computers or smart phones using Microsoft®’s browser (Internet Explorer®).
It is also accessible through internet or intranet.
21
L series Features
MX Sheet
MX Sheet is an Excel® software package that enables
PLC device data collection. PLC system monitoring, data
logging, alarm message collection, system setting, etc. can
be done using Excel®.
CPU
Easy data collection
using Excel®
I/O
Simple and program-less setting
[ Step1 ]
[ Step2 ]
Start the configuration utility, select
a function, and set the device
conditions.
Then, data collection will be
started only by arranging the
screen and executing the function.
Analog /
Temperature Control
MX Sheet operation conditions can be set from Excel®.
Therefore, a communication program is not required to
communicate between PLC and Excel®.
Positioning
The device data in the PLC is monitored and logged real
time before being written to Excel®. Recipe data can also be
transferred to PLC directly from Excel®.
Simple Motion
Direct connection between office and field
PLC
High-Speed
Counter
HMI (GOT)
Auto-generate periodic reports
Serial
Communication
The data displayed on Excel® is automatically saved
or printed at the specified time or as requested by the
PLC. Periodic reports and test result lists are generated
automatically.
M0 turns on
MX Sheet
<html lang="ja">
<head>
<meta name=XXX>
.................
</html>
Excel
HTML
18 : 55 : 16 1,001 0
18 : 55 : 17 1,002 1
18 : 55 : 18 1,003 1
18 : 55 : 19 1,004 0
18 : 55 : 20 1 005 0
CSV
Automatic printing of Excel file
(easy preparation of daily,
weekly and monthly reports)
Daily reports and monthly reports can be automatically saved
and printed according to various conditions.
22
Network
Automatic saving to Excel file,
HTML file and CSV file
L series Features
Harness the power of L series and GOT combined
When connected to an L series system, Mitsubishi Graphic Operation Terminals are capable of advanced
system maintenance and diagnostic functions that can reduce downtime.
Dedicated MELSEC-L series
maintenance screen*
(Troubleshooting functions for L series)
Jump from the L series maintenance screen to
the intelligent function module monitor screen
*GT16 only.
Save time by performing system maintenance functions directly from the GOT
Graphic Operation Terminals include maintenance screens dedicated
for the L series that let the user check CPU status and error
information. No PC is required and no special screens need to be
created for the GOT. Jump directly from the L series maintenance
screen to other maintenance screens such as the intelligent function
module monitor.
GT16
Intelligent module monitor, System monitor
Ladder monitor, Ladder editor, SFC monitor
Backup / restoration, Log viewer
General system information and combined error history
[Intelligent Module Monitor]
Monitor and test built-in I/O and expansion modules.
This feature works with nearly all expansion module types
from analog I/O to high speed counters and positioning.
GT16
GT15
[Backup / Restore]
Using this feature, it's easy to create backups of sequence
programs and other CPU data. It can even be configured
for automatic operation. Create backups after programs are
updated and restore programs in case of trouble. Because
the data are stored on the GOT, no PC is required.
GT16
GT15
Copy saved program files to a new CPU...
CPU exchange
Sequence
programs
Restore
GT14
Use GT Works3 templates to easily create screens
Select a template from the library and put it on the editor screen, and you can easily
create a simple motion module*1 operation monitor or error history screen, etc.
GT16
*1 LD77MH4 only
23
GT15
Memory
card,
etc.
GOTs enable ladder programs to be edited without the need for a PC. Furthermore, because it is possible to perform
write during run operations using the GOT, ladder programs may be corrected without stopping the machine, even if it
GT16
GT15
is in operation. (Ladder editing function)
Edit
Find/Replace Convert
Edit
Display Online
Find/Replace Convert
L series Features
Make simple corrections to ladder programs using a GOT
Display Online
CPU
Enter ladder program
Touch the area you wish to edit and
the ladder input window appears.
Enter ladder program
Insert row
Delete row
Insert column
Delete column
I/O
Ladder symbol: Change from normally closed contact to
normally open contact.
Device: Change from M422 to M200
Insert row
Delete row
Insert column
Delete column
Changes to M200,
normally open contact!
View logging data without a PC
Analog /
Temperature Control
For rapid support of troubleshooting activities, logging data can be analyzed using a GOT(GT16) even if no PC is
available. The change in data values can be quickly identified using dual cursors, the same as using GX LogViewer.
GT16
(Log viewer function)
Blue cursor
Simple Motion
Red cursor
GOT (GT16)
Positioning
Quickly see the difference in time
and value between cursors
The L series CPU's logging data can be saved to a USB memory stick when connected to the GOT's front USB interface.
Logging data can be retrieved easily without opening any control panels or removing the SD memory card from the CPU.
GT16
(Log viewer function)
USB memory
Serial
Communication
Retrieve logging data
without opening
the machine
Display and
analyze logging data
with GX LogViewer
Logging data
Ethernet
■ Copy logging data from the GOT (on site)
Machine
Retrieve logging data without removing the L Series CPU's SD memory card.
USB memory
PC
Network
Logging data is saved
to the GOT CF card
and can be transferred
to USB memory
High-Speed
Counter
Retrieve logging data without opening any panels
■ Use GX LogViewer(PC) to display logging data
Even where an Ethernet connection is unavailable,
logging data can be transferred from the GOT
to a USB device for use on a PC.
24
CPU
CPU Modules
■ L02CPU
Program capacity
20ksteps
Number of I/O points
1024points
Ethernet
USB
General Output
■L
02CPU-P
■ L26CPU-BT
16 inputs / 8 outputs
Program capacity
20ksteps
Number of I/O points
1024points
Ethernet
USB
Built-in I/O
Positioning
2 axes
Built-in I/O
16 inputs / 8 outputs
Program capacity
260ksteps
Number of I/O points
4096points
Basic operation
processing speed
9.5ns
Ethernet
USB
CC-Link Ver.2.0
Sink type
Built-in I/O
Positioning
2 axes
Built-in I/O
16 inputs / 8 outputs
Number of I/O points
4096points
Basic operation
processing speed
9.5ns
Ethernet
USB
CC-Link Ver.2.0
General Output
*END cover is included.
Built-in I/O
High-Speed Counter
2 ch
*END cover is included.
Built-in I/O
High-Speed Counter
2 ch
Program capacity
260ksteps
Source type
Built-in I/O
High-Speed Counter
2 ch
Basic operation
processing speed
40ns
Source type
General Output
■L
26CPU-PBT
Built-in I/O
Positioning
2 axes
Built-in I/O
Sink type
General Output
Basic operation
processing speed
40ns
Built-in I/O
16 inputs / 8 outputs
Built-in I/O
Positioning
2 axes
Built-in I/O
High-Speed Counter
2 ch
*END cover is included.
*END cover is included.
CPU packages
■ L02CPU-SET
Includes CPU (L02CPU), power supply module (L61P), and display unit (L6DSPU).
■ L26CPU-BT-SET
Includes CPU (L26CPU-BT), power supply module (L61P), and display unit (L6DSPU).
25
■ L02CPU-P-SET
Includes CPU (L02CPU-P), power supply module (L61P), and display unit (L6DSPU).
■ L26CPU-PBT-SET
Includes CPU (L26CPU-PBT), power supply module (L61P), and display unit (L6DSPU).
L series Features
■ General specifications
General specifications indicate the environmental specifications in which this product can be installed and operated. Unless otherwise specified, these general specifications apply to all L series products.
*General specifications of jointly developed products are different from those of MELSEC products. For more information, please refer to the product manuals or contact your local Mitsubishi Electric representative.
Item
Operating ambient
temperature
Storage ambient temperature
Ambient humidity (operating)
Ambient humidity (storage)
Specification
0 to 55°C
-25 to 75°C
5 to 95%RH, non-condensing
Vibration resistance
Sweep count
10 times each in
X, Y, and Z directions
—
I/O
Shock resistance
Operating atmosphere
Operating altitude*1
Installation location
Overvoltage category*2
Pollution degree*3
Equipment class
Frequency
Constant accelration
Half amplitude
5 to 8.4Hz
—
3.5mm
8.4 to 150Hz
9.8m/s2
—
5 to 8.4Hz
—
1.75mm
Under continuous
vibration
8.4 to 150Hz
4.9m/s2
—
Compliant with JIS B 3502 and IEC 61131-2 (147m/s2, 3 times each in X, Y, and Z directions)
No corrosive gases
0 to 2000m
Inside a control panel
ΙΙ or less
2 or less
Class Ι
Under intermittent
vibration
CPU
Compliant with
JIS B 3502 and IEC
61131-2
*1: Do not use or store the programmable controller under pressure higher than the atmospheric pressure of altitude 0m.
Doing so may cause malfunction. When using the programmable controller under pressure, please consult your local Mitsubishi Electric representative.
*2: This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the machinery within premises.
Category ΙΙ applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for up to the rated voltage of 300V is 2500V.
*3: This index indicates the degree to which conductive material is generated in terms of the environment in which the equipment is used.
Pollution level 2 is when only non-conductive pollution occurs. A temporary conductivity caused by condensing must be expected occasionally.
Analog /
Temperature Control
■ CPU module specifications
Item
L02CPU
Control method
I/O control mode
Memory
card (ROM)
SD SDHC
Built-in CC-Link function
Displayed information
Clock function
1.00A
0.94A
Serial
Communication
0°C: -2.96 to +3.74s (TYP. +1.42s) per day
25°C: -3.18 to +3.74s (TYP. +1.50s) per day
55°C: -13.20 to +2.12s (TYP. -3.54s) per day
Accuracy
With display unit
5VDC internal current CPU
Without display unit
consumption
END cover (Accessory)*4
With display unit
CPU
Weight
Without display unit
END cover (Accessory)*4
High-Speed
Counter
Standard RAM
Standard ROM
Initial setting
Maximum number of intelligent
function module parameters
Refresh
Maximum number of modules specification*3
Built-in I/O function
Data Logging function
Built-in Ethernet function
40ns
9.5ns
80ns
19ns
0.5 to 2000ms (Setting is available in increments of 0.5ms by parameter.)
20k steps (80k bytes)
260k steps (1040k bytes)
80k bytes
1040k bytes
—
Depends on the SD/SDHC memory card used.*2
128k bytes
768k bytes
512k bytes
2048k bytes
64 files
252 files
—
Root directory: 511 files (maximum)
Subdirectory: 65533 files (maximum)
Root directory: 65534 files (maximum)
Subdirectory: 65533 files (maximum)
4 files (each one of the following files: file register file, local device file, sampling trace file, and module error collection file)
128 files
256 files
2048 parameters
4096 parameters
1024 parameters
2048 parameters
30
40
Refer to the built-in I/O specifications ➡ P.27 to P.29
Refer to the Data Logging function specifications ➡ P.29
Refer to the built-in Ethernet specifications ➡ P.30
Refer to the built-in
—
CC-Link specifications ➡ P.63
Year, month, date, hour, minute, second, and day of the week (automatic leap year detection)
Positioning
Maximum number of
files stored
Function block, relay symbol language, MELSAP3 (SFC), MELSAP-L, structured text (ST), logic symbolic language
Simple Motion
Programming language
(sequence control language)
LD X0
Processing speed*1
(sequence instruction) MOV D0 D1
Constant scan
Program size
Program memory (drive 0)
Memory card (RAM) (drive 1)
Memory capacity
Memory card (ROM) (drive 2)
Standard RAM (drive 3)
Standard ROM (drive 4)
Program memory
Memory card (RAM)
L02CPU-P
L26CPU-BT
L26CPU-PBT
Stored program repeat operation
Refresh mode
(Direct mode is available by specifying the direct access input/output (DX, DY).)
1.43A
1.37A
0.04A
0.40kg
0.37kg
0.50kg
0.47kg
0.06kg
Network
*1: Indexing devices does not delay processing time.
*2: Mitsubishi Electric shall not guarantee the operation of any non-Mitsubishi Electric products.
*3: The total number of modules that can be mounted to a CPU. Refer to the "Maximum number of modules specification" for each module.
(Power supply modules, CPU module, Display unit, Extension module, RS-232 adapter, END cover, and END cover with error terminal are not included. Note that only one CPU or head module per system is
possible.)
*4: The END cover is included with the CPU module and must be placed on the right end of the last module in the system.
26
CPU
■ CPU module device specifications
Item
Number of I/O device points
L02CPU
(number of points available on a program)
Number of I/O points
Internal relay (M)
Latch relay (L)
Link relay (B)
Timer (T)
Retentive timer (ST)
Counter (C)
Data register (D)
Extended data register (D)
Link register (W)
Extended link register (W)
Annunciator (F)
Edge relay (V)
Link special relay (SB)
Link special register (SW)
(R)
File register
(ZR)
Step relay (S)
Index register/standard device register (Z)
Index register (Z)
L02CPU-P
L26CPU-BT
1024 points (X/Y0 to X/Y3FF)
4096 points (X/Y0 to X/YFFF)
8192 points (M0 to M8191) by default (changeable)
8192 points (L0 to L8191) by default (changeable)
8192 points (B0 to B1FFF) by default (changeable)
2048 points (T0 to T2047) by default (changeable) (Low-speed and high-speed timers available)
Low-speed or high-speed is specified by an instruction.
The measurement unit is set by parameter.
(Low-speed timer: 1 to 1000ms (in increments of 1ms), default: 100ms)
(High-speed timer: 0.1 to 100ms (in increments of 0.1ms), default: 10ms)
0 points by default (changeable)(Low-speed and high-speed retentive timers available)
Low-speed or high-speed is specified by an instruction.
The measurement unit is set by parameter.
(Low-speed retentive timer: 1 to 1000ms (in increments of 1ms), default: 100ms)
(High-speed retentive timer: 0.1 to 100ms (in increments of 0.1ms), default: 10ms)
Normal counter 1024 points (C0 to C1023) by default (changeable)
12288 points (D0 to D12287) by default (changeable)
32768 points (D12288 to D45055) by default
131072 points (D12288 to D143359) by default
(changeable)
(changeable)
8192 points (W0 to W1FFF) by default (changeable)
0 points by default (changeable)
2048 points (F0 to F2047) by default (changeable)
2048 points (V0 to V2047) by default (changeable)
2048 points (SB0 to SB7FF) by default (changeable)
2048 points (SW0 to SW7FF) by default (changeable)
32768 points (R0 to R32767)
32768 points (R0 to R32767)
(Maximum 65536 points are available by switching blocks.)
(Maximum 393216 points are available by switching blocks.)
65536 points (ZR0 to ZR65535)
393216 points (ZR0 to ZR393215)
(Blocks do not need to be switched.)
(Blocks do not need to be switched.)
8192 points (S0 to S8191) by default (The points can be changed to 0.)
20 points (Z0 to Z19) (maximum)
(32-bit index modification of ZR device)
Pointer (P)
Interrupt pointer (I)
Special relay (SM)
Special register (SD)
Function input (FX)
Function output (FY)
Function register (FD)
Intelligent function module device
Latch (data retention during power failure) range
10 points (Z0 to Z18) (maximum)
(The index register is used as a double-word device.)
4096 points (P0 to P4095) (The local pointer range and the common pointer range can be set by parameter.)
256 points (I0 to I255)
(The fixed scan interval for the system interrupt pointer I28 to I31 can be set by parameter.)
0.5 to 1000ms (in increments of 0.5ms)
Default I28: 100ms, I29: 40ms, I30: 20ms, I31: 10ms
2048 points (SM0 to SM2047) (The number of device points is fixed.)
2048 points (SD0 to SD2047) (The number of device points is fixed.)
16 points (FX0 to FX F) (The number of device points is fixed.)
16 points (FY0 to FY F) (The number of device points is fixed.)
5 points (FD0 to FD4) (The number of device points is fixed.)
Device that directly accesses the buffer memory of an intelligent function module
Specification format: U/G
8192 points (L0 to L8191) by default
(The latch range can be set for the devices, B, F, V, T, ST, C, D, W, and R by parameter.)
■ CPU built-in I/O - Input signal assignment
External input signal
X0(high-speed)
X1(high-speed)
X2(high-speed)
X3(high-speed)
X4(high-speed)
X5(high-speed)
X6(standard)
X7(standard)
X8(standard)
X9(standard)
XA(standard)
XB(standard)
XC(standard)
XD(standard)
XE(standard)
XF(standard)
L26CPU-PBT
8192 points (X/Y0 to X/Y1FFF)
: Selectable
×: No combination
Function
General-purpose input
















Interrupt input
*1
*1
*1
*1












Pulse catch
















High-speed counter
Counter CH1 A phase*1
Counter CH1 B phase*1
Counter CH2 A phase*1
Counter CH2 B phase*1
Counter CH1 Z phase*2
Counter CH2 Z phase*2
Counter CH1 Function input*2
Counter CH2 Function input*2
Counter CH1 latch counter*2
Counter CH2 latch counter*2
×*3
×*3
×*3
×*3
×*3
×*3
Positioning
×*3
×*3
×*3
×*3
Axis #1 Zero signal*2
Axis #2 Zero signal*2
Axis #1 External command signal*2
Axis #2 External command signal*2
Axis #1 Drive module READY signal*2
Axis #2 Drive module READY signal*2
Axis #1 Near-point dog dignal*2
Axis #2 Near-point dog dignal*2
Axis #1 Upper limit signal*2
Axis #2 Upper limit signal*2
Axis #1 Lower limit signal*2
Axis #2 Lower limit signal*2
*1: When using CH1 for the high-speed counter function, X0 and X1 cannot be used as interrupt inputs. Also, when using CH2 for the high-speed counter function, X2 and X3 cannot be used as interrupt inputs.
Other functions such as the general-purpose input can be used.
*2: When this signal is not required, the input signal can be used for other functions such as the general-purpose input.
*3: When the high-speed counter function or positioning function is selected, this signal is not used for that function. This input signal may be used for another function such as a general-purpose input.
27
External input signal
: Selectable
Function
High-speed counter
CH1 Coincidence output No.1*1
CH2 Coincidence output No.1*1
CH1 Coincidence output No.2*2
CH2 Coincidence output No.2*2
×*3
×*3
×*3
×*3
Positioning
×*3
×*3
Axis #1 Deviation counter clear*1
Axis #2 Deviation counter clear*1
Axis #1 CW/PULSE/A phase output*1
Axis #2 CW/PULSE/A phase output*1
Axis #1 CCW/SIGN/B phase output*1
Axis #2 CCW/SIGN/B phase output*1
CPU
General-purpose output








Y0
Y1
Y2
Y3
Y4
Y5
Y6
Y7
×: No combination
L series Features
■ CPU built-in I/O - Output signal assignment
*1: This signal must be used depending on parameter settings.
When this signal is not used, the output signal can be used for the general-purpose output function.
*2: When this signal is not used, the output signal can be used for the general-purpose output function.
*3: When the high-speed counter function or positioning function is selected, this signal is not used for that function.
This input signal may be used for another function such as a general-purpose output.
■ CPU built-in I/O function - input specifications (general input/interrupt input/pulse catch function)
The minimum input response time
Input response time setting
Common terminal arrangement
L02CPU-P
L26CPU-BT
L26CPU-PBT
10
24VDC 4.1mA (TYP.)
100μs
0.1ms/1ms/5ms/10ms/20ms/70ms
10 points/common (Positive or negative common)
6
24VDC 6.0mA (TYP.)
EIA Standard RS-422-A Differential line driver level
AM26L31 (manufactured by Texas Instruments Incorporated) or equivalent
10μs
0.01ms/0.1ms/0.2ms/0.4ms/0.6ms/1ms
Independent
Analog /
Temperature Control
High-speed input
L02CPU
I/O
Standard input
Item
Points
Input voltage/current
The minimum input response time
Input response time setting
Common terminal arrangement
Points
DC input
Input voltage/current
Differential input
■ CPU built-in I/O function - output specifications (general output function)
Item
L02CPU
L02CPU-P
Response time
L26CPU-BT
L26CPU-PBT
8
5 to 24VDC 0.1A
OFF to ON
ON to OFF
Common terminal arrangement
1μs or less (rated load, resistance load)
8 points/common (Sink type)
8 points/common (Source type)
8 points/common (Sink type)
8 points/common (Source type)
L26CPU-BT
L26CPU-PBT
■ CPU built-in I/O function - positioning function specifications
Item
Number of controlled axes
Control unit
2
pulse
Available
Not usable
10 data/axis
ABS/INC
PTP*1 control
Path control
Number of positioning data
Positioning
control
PTP*1 control
Positioning control
Speed/position
method
switching control
PTP*1 control
Positioning range Speed/position
switching control
Speed command
Acceleration/deceleration system selection
Acceleration/deceleration time
INC
-2147483648 to 2147483647 pulses
0 to 2147483647 pulses
Starting time (1-axis linear control)
Speed/position switching signal
Near-point dog signal
Upper and lower limit signal
Drive unit ready signal
24VDC 4.1 mA (TYP.)
Deviation counter clear signal
Response time
5 to 24VDC 0.1A (Sink type)
OFF to ON
ON to OFF
Zero signal: 10 μs
Speed/position switching control, near-point dog signal: 100 μs
Upper and lower limit signal, drive unit ready signal: 2 ms
5 to 24VDC 0.1A (Source
5 to 24VDC 0.1A (Sink type)
type)
Network
Input response time
External
output
Serial
Communication
Pulse output method
Command Pulse output mode
pulse output Maximum output pulse
Maximum connection distance with drive unit
DC input
Zero signal
Differential input
High-Speed
Counter
0 to 200 kpulses/s
Automatic trapezoid acceleration/deceleration and S-curve acceleration/deceleration
0 to 32767 ms
6 types
Trapezoid acceleration/deceleration (single-axis start): 30 μs/axis
S-curve acceleration/deceleration (single-axis start): 35 μs/axis
5 to 24VDC (Sink type)
5 to 24VDC (Source type)
5 to 24VDC (Sink type)
5 to 24VDC (Source type)
4 types
200 kpulses/s
2m
24VDC 6.0 mA (TYP.)
EIA RS-422-A differential line driver level
(AM26LS31 (by Texas Instruments Japan Limited.) or equivalent)
OPR method
External
input
L02CPU-P
Positioning
Operation pattern
L02CPU
Simple Motion
Points
Output voltage/current
5 to 24VDC 0.1A (Source
type)
1 μs or less (rated load, resistive load)
*1: Abbreviation for "Point to Point." This is a type of position control.
28
CPU
■ CPU built-in I/O function - high-speed counter specifications
Item
L02CPU
Number of channels
Phase
Count input
signal
DC input
Differential
input
Signal level
Maximum counting speed
Counting range
Model
Counter
External
input
1 phase
2 phases
Min. phase differential for 2-phase
input
DC input
Phase Z (preset)
Differential
input
Function start
Latch
Minimum count pulse
width (Duty ratio 50%)
Response time
L26CPU-PBT
5μs
24VDC 4.1mA (TYP.)
Output format
Output voltage / current
L26CPU-BT
2
1-phase input (1 multiple/2 multiples)
CW/CCW,
2-phase input (1 multiple/2 multiples/4 multiples)
24VDC 6.0mA (TYP.)
EIA Standard RS-422-A Differential line driver level
(AM26L31(manufactured by Texas Instruments Incorporated) or equivalent)
200k pulse/s (for 2 multiples of 1 phase and 4 multiples of 2 phases)
-2147483648 to 2147483647
UP/DOWN preset counter (with ring counter function)
5μs
10μs
24VDC 6.0mA (TYP.)
EIA Standard RS-422-A Differential line driver level
(AM26L31(manufactured by Texas Instruments Incorporated) or equivalent)
Input response time
External
output
L02CPU-P
Sink type
Coincidence
output No. 1 /
PWM output
Coincidence
output No. 2
OFF to ON
ON to OFF
Phase Z: 10μs
Function start, latch: 100μs
Source type
Sink type
Source type
5 to 24 VDC / 0.25 A*1
5 to 24 VDC / 0.1 A
1μs or less (Rated load, resistance load)
Comparison range
-2147483648 to 2147483647
Set value < Counted value
Set value = Counted value
Set value > Counted value
2 points / channel
DC to 200kHz
1μs
On width can be set in increments of 0.1μs.
1 point / channel
Pulse width (On width: 200μs or more, Off width: 200μs or more)
5μs
1 point/channel
Coincidence
Comparison result
output
I/O points
Output frequency range
ON width
PWM
output
Duty ratio
I/O points
Measurement item
Pulse width
Measurement resolution
measurement
Measurement points
*1: For units where the first six digits of the serial number are "120722" or later. The specification for previous serial numbers is 5 to 24 VDC / 0.1 A.
■ CPU Data logging function specifications
Item
Number of data logging settings
L02CPU
L26CPU-BT
L26CPU-PBT
10
For each setting, any of 32 to 4832 k bytes (in units of 1 k byte) can be specified.
The total value of settings No.1 to No.10 is up to 5120 k bytes.
Standard ROM (configuration files only), SD Memory Card
• Continuous logging
• Trigger logging
• Each scanning cycle
• Time specification
• Condition specification (Device specification, Step No. specification)
Up to 1280 (128 points per setting)
In the Sampling interval setting, Device and Step No. under "Condition specification" can be specified in combination
(AND conjunction).
• Condition specification (Device change specification, Step No. specification)
• When trigger instruction executed
• When data logging trigger activated
In the Trigger setting, Device data change and Step No. under "Condition specification" can be specified in combination
(AND conjunction).
Data of the specified number of records are logged before and after a trigger.
1
Data logging buffer capacity
Data storage location
Logging type
Data
sampling
Sampling interval
No. of data sampling points
AND conjunction
Trigger condition
Data
Trigger
processing logging
AND conjunction
Trigger logging range
Number of triggers
Number of trigger logging
Up to 1000000
records
File Name
File format
File output
Data type
Data output format (CSV file)
Handling of File
File switching timing
output files switching
Number of saved files
*1: Part of the saved file name, this number is automatically assigned.
*2: Optional data to be appended to the saved file name.
29
L02CPU-P
Up to 48 one-byte characters can be used for the following.
• File number (serial number)*1
• Character string (name)*2 • Date and time*2
CSV file
•Bit
•Word (unsigned)
•Word (signed)
•Double word (unsigned)
•Double word (signed)
•FLOAT [single precision]
•FLOAT [double precision] •Character string: 1 to 256 •Numeric string: 1 to 256
characters
bytes
• Decimal format
• Hexadecimal format
• Exponential format
• No. of records
• File size
1 to 65535
L series Features
■ CPU built-in Ethernet function specifications
L02CPU
L02CPU-P
L26CPU-BT
100 or 10 Mbps
Full-duplex or half-duplex
Base band
100 m
Cascade connection: Up to four
Cascade connection: Up to two
L26CPU-PBT
Total of 16 for socket communications, MELSOFT connections, and MC protocol.*1
One for FTP
CPU
Item
Data transfer speed
Communication mode
Transmission Transmission method
specifications Maximum distance between hub and node
Maximum number of 10BASE-T
nodes/connection
100BASE-TX
TCP/IP
Number of
connections
UDP/IP
10BASE-T
Connection
cable*2
100BASE-TX
Ethernet cable of category 3 or higher (STP/UTP cable)*3
Ethernet cable of category 5 or higher (STP cable)
*1: Only the QnA-compatible 3E frame may be used.
*2: Straight through cable. Also, when the CPU is connected directly with a GOT, a cross cable (category 5e or less) may be used.
*3: The use of STP (Shielded Twisted Pair) cables is recommended in noisy environments.
I/O
■ How to read the product code
➀
Number
➀
Item
Program memory capacity
Item
Type of module
Number
➂
Item
Built-in I/O output format
➃
Item
Built-in CC-Link function
Number
➄
Item
Product set
➃
➄
Code
02
26
Specification
20k steps
260k steps
Code
Specification
CPU
CPU module
Code
Blank
P
Specification
Sink type
Source type
Code
Blank
BT
Specification
—
✓
Code
Blank
SET
Specification
—
Set includes a power supply module (L61P) and display unit (L6DSPU)
Positioning
Number
➂
Simple Motion
Number
➁
➁
Analog /
Temperature Control
L 26 CPU - P BT - SET
High-Speed
Counter
Serial
Communication
Network
30
CPU
Branch / Extension Module
■L
6EXB
For extension
system
(branch)
■L
6EXE
For extension
system
(extension)
■ Specifications for branch and extension modules
Item
5VDC internal current consumption
Weight
L6EXB [ Branch module ]
0.08A
0.12kg
L6EXE [ Extension module ]
0.08A
0.13kg
■ Specifications for extension cables
Item
LC06E
0.6m
0.19kg
Cable length
Weight
LC10E
1.0m
0.23kg
LC30E
3.0m
0.45kg
Power Supply Modules
■ L61P
Input
100 to 240VAC
■ L63P
Input
24VDC
Output
5VDC, 5A
Output
5VDC, 5A
■ Power supply module specifications
Item
Input power supply
Input frequency
Input voltage distortion
Maximum input apparent power
Maximum input power
Inrush current
Rated output current (5VDC)
Overcurrent protection (DC5V)
Overvoltage protection
Efficiency
Allowable momentary power failure time
Weight
31
L61P
100 to 240VAC (-15% to +10%)
50/60Hz (-5% to +5%)
L63P
24VDC (-35% to +30%)
—
Within 5%
—
130VA
—
20A, within 8ms
—
45W
100A, within 1ms (24VDC input)
5A
5.5A or more
5.5 to 6.5V
70% or more
Within 10ms
0.32kg
Within 10ms (24VDC input)
0.29kg
RS-232 Adapter
RS-232
L series Features
■ L6ADP-R2
*For connection of GOT
Transmission speed
115.2kbps
CPU
■ RS-232 adapter specifications
Item
Maximum data transmission speed
5VDC internal current consumption
Weight
Specification
115.2kbps
0.02A
0.10kg
I/O
END Cover with Error Terminal
■ L6EC-ET
Analog /
Temperature Control
Error output
Relay
Specification
24VDC 0.5A
5VDC, 1mA
10ms or less
12ms or less
20 million times or more
Rated switching voltage/current: 10 million times or more
—
—
0.3 to 2.0mm2 (AWG22 to 14) (Twisted wire/Solid wire)
Spring clamp terminal block
0.06A
0.11kg
Positioning
Item
Rated switching voltage, current
Minimum switching load
OFF to ON
Response time
ON to OFF
ERR. terminal
Mechanical
Life
Electrical
Surge suppressor
Fuse
Applicable wire size
External connections
5VDC internal current consumption
Weight
Simple Motion
■ END cover with error terminal specifications
■ L6DSPU
Number of display
characters
16 characters x 4 lines
Language selection
High-Speed
Counter
Display Unit
Backlight display
Japanese or English Green or Red
Serial
Communication
■ Display Unit specifications
Item
Number of displayed characters
Language
Backlight
Weight
Network
Displayed characters
Specification
16 one-byte characters × 4 lines
• Alphanumeric (two-byte/one-byte character)
• Katakana (two-byte/one-byte character)
• Hiragana (two-byte character)
• Chinese character (two-byte character)
• Symbol (two-byte/one-byte character)
Japanese/English
Green (normal), red (error)
0.03kg
32
I/O
Input Modules
■ LX10
AC input
NEW
■ LX28
AC input
NEW
■ LX40C6
DC input
Number of inputs
16points
Rated input voltage
100 to 120VAC
Response time
20ms or less
External connections
18-point
terminal block
Number of inputs
8points
Rated input voltage
100 to 240VAC
Response time
20ms or less
External connections
18-point
terminal block
Number of inputs
16points
Rated input voltage
24VDC
Response time
1 to 70ms or less
■ LX41C4
DC input
■ LX42C4
DC input
Rated input voltage
24VDC
Response time
External connections
40-pin
33
Positive/Negative
common
connector
Number of inputs
64points
Rated input voltage
24VDC
Response time
External connections
40-pin
1 to 70ms or less
common
External connections
18-point
terminal block
Number of inputs
32points
1 to 70ms or less
Positive/Negative
connector ×2
Positive/Negative
common
LX40C6
LX41C4
LX42C4
All DC input modules are capable of using both positive or negative common connections; separate modules are not
necessary.
LX40C6
LX41C4
LX42C4
For all DC input modules, match the response speed to the connected devices. Choose from 1, 5, 10, 20 or 70ms.
I/O
■ Input module specifications
[AC input module]
Item
Number of input points
Rated input voltage, frequency
Input voltage distortion
Inrush current
ON voltage/ON current
OFF voltage/OFF current
Input impedance
Response
time
OFF to ON
Simple Motion
ON to OFF
Common terminal arrangement
Maximum number of modules
specification
Number of occupied I/O points
External connections
5VDC internal current
consumption
Weight
LX10 NEW
LX28 NEW
16 points
8 points点
100 to 120VAC (+10%/-15%), 50/60Hz (±3Hz)
100 to 240VAC (+10%/-15%), 50/60Hz(±3Hz)
Within 5%
16.4mA (200VAC, 60Hz),
8.2mA (100VAC, 60Hz),
13.7mA (200VAC, 50Hz),
6.8mA (100VAC, 50Hz)
8.2mA (100VAC, 60Hz),
6.8mA (100VAC, 50Hz)
Max. 200mA within 1ms
Max. 950mA within 1ms
80VAC or higher/5mA or higher (50Hz, 60Hz)
30VAC or lower/1.7mA or lower (50Hz, 60Hz)
12.2kΩ (60Hz), 14.6kΩ (50Hz)
15ms or less (100VAC 50Hz, 60Hz)
15ms or less (100VAC 50Hz, 60Hz)
10ms or less (200VAC 50Hz, 60Hz)
20ms or less (100VAC 50Hz, 60Hz)
20ms or less (100/200VAC 50Hz, 60Hz)
16 points/common
8 points/common
Analog /
Temperature Control
Rated input current
Counts as 1 module
16 points (I/O assignment: input 16 points)
18-point screw terminal block
90mA (TYP. all points ON)
80mA (TYP. all points ON)
0.17kg
0.15kg
Positioning
[DC input module]
LX40C6
16 points
6.0mA TYP. (at 24VDC)
15V or higher/4mA or higher
8V or lower/2mA or lower
3.8kΩ
LX41C4
32 points
24VDC (+20%/-15%, ripple ratio within 5%)
4.0mA TYP. (at 24VDC)
19V or higher/3mA or higher
9V or lower/1.7mA or lower
5.7kΩ
LX42C4
64 points
1ms/5ms/10ms/20ms/70ms or less
Initial setting is 10ms.
16 points/common
High-Speed
Counter
32 points/common
Counts as 1 module
16 points (I/O allocation: input 16 points)
18-point screw terminal block
32 points (I/O assignment: input 32 points)
40-pin connector
64 points (I/O allocation: input 64 points)
40-pin connector ×2
90mA (TYP. all points ON)
100mA (TYP. all points ON)
120mA (TYP. all points ON)
0.15kg
0.11kg
0.12kg
Serial
Communication
Item
Number of input points
Rated input voltage
Rated input current
ON voltage/ON current
OFF voltage/OFF current
Input impedance
OFF to ON
Response time
ON to OFF
Common terminal arrangement
Maximum number of modules
specification
Number of occupied I/O points
External connections
5VDC internal current
consumption
Weight
CPU
Adjustable sensing speed
L series Features
Positive or negative common
Network
34
I/O
Output Modules
■ LY10R2
■L
Y20S6
Contact output
Triac output
NEW
Number of outputs
16points
Rated switching
current
2A/point
Max. switching load
264VAC/125VDC
Number of outputs
16points
Rated load voltage
100 to 240VAC
Response time
12ms or less
Max. load current
0.6A/point
1ms + 0.5cycles
External connections
18-point
terminal block
or less
External connections
18-point
terminal block
■ LY40NT5P
■ LY41NT1P
Transistor output
Transistor output
Number of outputs
16points
Rated load voltage
12 to 24VDC
Number of outputs
32points
Rated load voltage
12 to 24VDC
Max. load current
0.5A/point
Response time
1ms or less
Max. load current
0.1A/point
Response time
1ms or less
Sink type
Protection
Function
Sink type
Protection
Function
External connections
18-point
terminal block
External connections
40-pin
connector
■ LY42NT1P
■ LY40PT5P
Transistor output
Transistor output
Number of outputs
64points
Rated load voltage
12 to 24VDC
Number of outputs
16points
Rated load voltage
12 to 24VDC
Max. load current
0.1A/point
Response time
1ms or less
Max. load current
0.5A/point
Response time
1ms or less
Sink type
Protection
Function
Source type
Protection
Function
External connections
18-point
terminal block
External connections
40-pin
connector ×2
■ LY41PT1P
■ LY42PT1P
Transistor output
Transistor output
Number of outputs
32points
Rated load voltage
12 to 24VDC
Number of outputs
64points
Rated load voltage
12 to 24VDC
Max. load current
0.1A/point
Response time
1ms or less
Max. load current
0.1A/point
Response time
1ms or less
Source type
Protection
Function
Source type
Protection
Function
External connections
40-pin
connector
35
Response time
External connections
40-pin
connector ×2
LY40NT5P
LY41NT1P
LY42NT1P
LY40PT5P
LY41PT1P
LY42PT1P
Modules are built with countermeasures in case of external load short-circuits to protect against over-current and overheating.
■ Output module specifications
[ Contact output module ]
Rated switching voltage, current
Minimum switching load
Maximum switching load
OFF to ON
Response time
ON to OFF
Mechanical
LY10R2
16 points
24VDC 2A (resistive load)/point, 8A/common
240VAC 2A (COSf=1)/point, 8A/common
5VDC 1mA
264VAC 125VDC
10ms or less
12ms or less
20 million times or more
Usage environment
Electrical
100 thousand times
200VAC 1.5A, 240VAC 1A (COSf = 0.7)
100 thousand times
200VAC 0.4A, 240VAC 0.3A (COSf = 0.7)
300 thousand times
200VAC 1A, 240VAC 0.5A (COSf = 0.35)
100 thousand times
200VAC 0.3A, 240VAC 0.15A (COSf = 0.35)
300 thousand times
24VDC 1A, 100VDC 0.1A (L/R = 7ms)
100 thousand times
24VDC 0.3A, 100VDC 0.03A (L/R = 7ms)
300 thousand times
3600 times/hour
—
—
16 points/common
Counts as 1 module
16 points (I/O assignment: 16 input points)
18-point terminal block
460mA (TYP. all points ON)
0.21kg
Analog /
Temperature Control
Maximum switching frequency
Surge suppressor
Fuse
Common terminal arrangement
Maximum number of modules specification
Number of occupied I/O points
External connections
5VDC internal current consumption
Weight
Switching life
Rated switching voltage/current, rated load
I/O
Life
CPU
Item
Number of output points
Simple Motion
[ Triac output module ]
LY20S6 NEW
16 points点
100 to 240VAC (+10%/-15%), 50/60Hz(±3Hz)
0.6A/point, 4.8A/common
Within 5%
264VAC
24VAC/100mA, 100VAC/25mA, 240VAC/25mA
20A/cycle or less
3mA or lower (at 240V, 60Hz), 1.5mA or lower (at 120V, 60Hz)
1.5V or lower (at load current of 0.6A)
Total of 1ms and 0.5 cycles or less
Total of 1ms and 0.5 cycles or less (rated load, resistive load)
CR absorber
None (Attaching a fuse to each external wiring is recommended.)
16 points/common
Counts as 1 module
16 points (I/O assignment: output 16 points)
18-point terminal block
300mA (TYP. all points ON)
0.22kg
Positioning
High-Speed
Counter
Item
Number of output points
Rated load voltage, frequency
Maximum load current
Load voltage distortion ratio
Maximum load voltage
Minimum load voltage/current
Maximum inrush current
Leakage current at OFF
Maximum voltage drop at ON
OFF to ON
Response time
ON to OFF
Surge suppressor
Fuse
Common terminal arrangement
Maximum number of modules specification
Number of occupied I/O points
External connections
5VDC internal current consumption
Weight
L series Features
Module protection features
Serial
Communication
Network
36
I/O
[Transistor output module (Sink type)]
Item
Number of output points
Rated load voltage
Maximum load current
Maximum inrush current
Leakage current at OFF
LY40NT5P
16 points
0.5A/point, 5A/common
0.2VDC(TYP.)0.5A,
0.3VDC(MAX.)0.5A
Maximum voltage drop at ON
Response time
OFF to ON
ON to OFF
Surge suppressor
Fuse
Protection function
Overload protection
Overheat protection
Voltage
Current
Common terminal arrangement
Maximum number of modules specification
External power supply
Number of occupied I/O points
External connections
5VDC internal current consumption
Weight
LY41NT1P
32 points
12 to 24VDC (+20%/-15%)
0.1A/point, 2A/common
Current is limited by the overload protection function.
0.1mA or less
0.1VDC (TYP.) 0.1A,
0.2VDC (MAX.) 0.1A
0.5ms or less
1ms or less (rated load, resistance load)
Zener diode
—
Limited current when detecting
overcurrent (overload protection):
1.5 to 3.5A/point.
Activated in increments of 1 point.
LY42NT1P
64 points
Overcurrent detection/overload protection limit current: 1 to 3A/point,
Activated in increments of 1 point
Activated in increments of 1 point
12 to 24VDC (+20%/-15%, ripple ratio within 5%)
9mA (at 24VDC)/common
13mA (at 24VDC)/common
9mA (at 24VDC)/common
16 points/common
32 points/common
Counts as 1 module
16 points
32 points
64 points
(I/O assignment: 16 output points)
(I/O assignment: 32 output points)
(I/O assignment: 64 output points)
18-point terminal block
40-pin connector
40-pin connector ×2
100mA (TYP. all points ON)
140mA (TYP. all points ON)
190mA (TYP. all points ON)
0.15kg
0.11kg
0.12kg
[Transistor output module (Source type)]
Item
Number of output points
Rated load voltage
Maximum load current
Maximum inrush current
Leakage current at OFF
Maximum voltage drop at ON
Response time
OFF to ON
ON to OFF
Surge suppressor
Fuse
Protection function
Overload protection
Overheat protection
Voltage
Current
Common terminal arrangement
Maximum number of modules specification
External power supply
Number of occupied I/O points
External connections
5VDC internal current consumption
Weight
37
LY40PT5P
16 points
LY41PT1P
LY42PT1P
32 points
64 points
12 to 24VDC (+20%/-15%)
0.5A/point, 5A/common
0.1A/point, 2A/common
Current is limited by the overload protection function.
0.1mA or less
0.2VDC(TYP.)0.5A,
0.1VDC (TYP.) 0.1A,
0.3VDC(MAX.)0.5A
0.2VDC (MAX.) 0.1A
0.5ms or less
1ms or less (rated load, resistance load)
Zener diode
—
Limited current when detecting overcurrent (overload protection):
Overcurrent detection: 1.5A or more/point.
1 to 3A/point.
Activated in increments of 1 point.
Activated in increments of 1 point.
Activated in increments of 1 point.
Activated in increments of 2 point.
12 to 24VDC (+20%/-15%, ripple ratio within 5%)
17mA (at 24VDC)/common
20mA (at 24VDC)/common
16 points/common
32 points/common
Counts as 1 module
16 points
32 points
64 points
(I/O assignment: 16 output points)
(I/O assignment: 32 output points)
(I/O assignment: 64 output points)
18-point terminal block
40-pin connector
40-pin connector ×2
100mA (TYP. all points ON)
140mA (TYP. all points ON)
190mA (TYP. all points ON)
0.15kg
0.11kg
0.12kg
L series Features
■ How to read the product code
L Y 4 0 NT 5 P
➀ ➁ ➂
➀
➄ ➅
Item
Code
X
Y
Item
Code
Module type
CPU
Number
➃
Specification
Input
Output
Specification
Number
Voltage specification
Number
➂
Code
0
1
2
8
Specification
16 points
32 points
64 points
8 points
Item
Code
Blank
C
NT
PT
R
S
Specification
AC input
DC input (positive / negative shared common)
Transistor output module (Sink type)
Transistor output module (Source type)
Contact output
Triac output
Item
Code
I/O type
Transistor output
—
—
12 to 24VDC
Analog /
Temperature Control
➃
Output module
Triac output
—
100 to 240VAC
—
Item
I/O points
Number
Contact output
24VDC/240VAC
—
—
I/O
➁
1
2
4
Input module
AC input
DC input
100 to 120VAC
—
100 to 240VAC
—
—
24VDC
Specification
➄
Current specification
Code
P
Output module
AC input
DC input
Contact output
Triac output
Transistor output
—
—
—
—
—
—
—
4mA
—
6mA
—
2A
—
—
—
—
—
—
—
0.6A
0.1A
—
—
0.5A
—
Specification
Includes protection function
Positioning
Number
Item
Extra Specifications
➅
1
2
4
5
6
Input module
Simple Motion
Number
High-Speed
Counter
Serial
Communication
Network
38
Analog / Temperature Control
Analog Input Module
■ L60AD4
Number of inputs
4 points
(channels)
Input voltage
Input current
-10 to 10VDC
0 to 20mADC
Conversion speed
20μs/ch
1/20000
Resolution
Accuracy
±0.1%
Scaling
function
Shift
function
Logging
function
Difference
conversion
function
Flow amount
integration
function
Input signal error
Input range
detection extension extended mode
function
function
Conversion
speed switch
function
Warning output
function
GX Works2
Error history
Analog Output Module
■ L60DA4
Number of outputs
4 points
(channels)
output voltage
output current
-10 to 10VDC
0 to 20mADC
Resolution
Accuracy
±0.1%
Conversion speed
20μs/ch
1/20000
Analog output
Warning output
HOLD/CLEAR
function
function
Scaling
function
GX Works2
Error history
Reduce programming man-hours using the scaling function
L60AD4
L60DA4
The scaling function converts values directly to easy-to-understand units without any programming.
Speed up scan times by eliminating the conversion process by sequence program.
Scaling settings for A to D conversion module (example)
Normally an analog input of 4 to 20mA is converted to a digital value from 0 to 20000. Using the scaling feature, the
same input can result in a digital value of ±20000.
[Before scaling]
Digital output value
[After scaling]
Scaling value
20000
Input current (mA) Digital output value
4
0
8
5000
12
10000
16
15000
20
20000
20000
Scaling: Valid
Scaling upper limit value
“20000”
0
Scaling lower limit value
Scaling value
−20000
−10000
0
10000
20000
“-20000”
0
4
8
12
16
20
Input current (mA)
Scaling upper/lower limit values
can be set within the range from
-32000 to 32000.
−20000
4
8
12
16
20
Input current (mA)
Easily and finely adjust the system startup time with the shift function.
L60AD4
[ Shift function*1]
Using this function, the set shifting amount to conversion value can be added (shifted) to the digital output value.
When the shifting amount to conversion value is changed, it is reflected to the scaling value (digital operation value) in
real time. Therefore, fine adjustment can be easily performed when the system starts.
*1 T
his function is compatible with analog input modules starting with serial No. “13041” or higher.
■ Before adjustment
Input voltage (V)
0
5
■ After adjustment
Input voltage (V)
0
5
39
Digital output value
-10
19990

Shifting amount to
conversion value: +10
Scaling value
(digital operation value)
0
20000
20000
Digital output value
19990
+
Shifting amount to
conversion value
Scaling value
(digital operation value)
Scaling value
(digital operation value)
+10
Digital output value
(before adjustment)
0
−10
5
Analog input
voltage (V)
L60AD4
[ Logging function*1 ]
Data is continuously collected at the set cycle and stored in
the buffer memory.
Data stored in the buffer memory can be used for
debugging, and to periodically confirm data variations.
Item
Collectable points
Collectable data
Logging cycle*2
CPU
Conversion speed
Level trigger condition
Logging points after trigger
Description
10000 points (ch)
Digital output value or scaling value
(digital operation value)
80 to 32767μs
1 to 32767ms
1 to 3600s
80μs, or 1ms
Above, Below, Pass Through
1 to 10000
L series Features
Log data for up to 10,000 points
*1 T
his function is compatible with analog input modules starting with
serial No. “13041” or higher.
I/O
The logging data can be analyzed with the GX LogViewer
or MX Sheet.
*2 The actual logging cycle is "an integral multiple of the conversion
cycle of each A/D conversion method".
Ex.) W
hen using the sampling processing: Conversion cycle =
conversion speed × number of channels in use.
When an error is detected in the digital value:
Start
the logging facility
Store data to
the buffer memory
Trigger occurred
A large amount of
data can be logged
at high speed.
Conditions for the
level trigger can be
set.
Stop logging
Logging points after
the trigger can be
set.
Logging data can be transferred to the CPU device memory while still logging.
Logging and data transmission can be executed simultaneously so the next logging session can be started right away.
Collected data
Buffer memory (L60AD4)
Logging area
Buffer memory (L60AD4)
2001st to 3000th data
5001st to 6000th data
6001st to 7000th data
7001st to 8000th data
8001st to 9000th data
9001st to 10000th data
When data for 10,000 points has
been stored, the data is
overwritten from the 1st point data.
Positioning
[Continuous logging example]
While logging the 1001st
to 2000th data, the 1st to
the 1000th data is
transferred to the CPU
device memory by the
ladder program.
By transferring the data for
every 1000 points, data for
more than 10000 points
can be logged.
4001st to 5000th data
9999th data
10000th data
1st to 1000th data
Log data for more
than 10,000 points!
1001st to 2000th data
3001st to 4000th data
Logging
standby area
CPU device memory
Transfer
1st to 1000th data
Easily measure part thicknesses!
L60AD4
High-Speed
Counter
1
Scaling value
(digital operation value)
20000
Difference conversion
reference value
Scaling value
(digital operation value)
10000
7500
2500
Time
0
−2500
Difference conversion No request (0)
trigger
Trigger request (1)
No request (0)
Serial
Communication
[ Difference conversion function* ]
When the difference conversion starts, the
scaling value (digital operation value) at that
time is determined as the difference conversion
reference value. The value acquired by
subtracting the difference conversion reference
value from the scaling value (digital operation
value) is stored as the scaling value (digital
operation value) after difference conversion.
Simple Motion
1st data
2nd data
3rd data
4th data
5th data
6th data
Logging
completed
area
Analog /
Temperature Control
Display and analyze data
with GX LogViewer or MX Sheet
Network
Scaling value (digital operation value)
Scaling value
Difference conversion
=
–
after difference conversion
(digital operation value)
reference value
*1 T
his function is compatible with analog input modules starting with serial No. “13041” or higher.
40
Analog / Temperature Control
Extend the detection method according to applications
L60AD4
[ Input signal error detection extension function*1 ]
Using this function, the detection method of the input signal error detection function can be extended. Use this function
to detect an input signal error only at the lower or upper limit, or to execute the disconnection detection.
[ Input range extended mode function*1 ]
The input range can be extended. By combining this function with the input signal error detection function,
simple disconnection detection can be executed.
*1 T
his function is compatible with analog input modules starting with serial No. “13041” or higher.
Quickly calculate and record flow amount
L60AD4
[ Flow amount integration function*1]
This function performs the A/D conversion of analog input value (voltage or current) from a flow meter and others, and
integrates the scaling value (digital operation value) by every integration cycle. In this function, integral processing is
performed regarding the scaling value (digital operation value) as the instantaneous flow amount.
■ Concept of integral processing
Analog input value
With this function, integral processing is performed using the following formula.
Integrated
=
flow amount
(
Instantaneous
×
flow amount
∆T
T
)
× Unit scaling + Previous amount
Time
0
*1 T
his function is compatible with analog input modules starting with serial No. “13041” or higher.
Integrated
flow amount
Integration
cycle
Item
Description
Integrated flow amount
Result of integral processing
Instantaneous flow amount Instantaneous flow amount value output in analog from flow meter
Integration cycle (ms)
∆T
Conversion value to convert time unit of instantaneous flow amount to ms unit
Range of flow meter
Setting value to specify flow amount time unit
/s
0
T
/min
1
/h
2
Unit scaling
Unit scaling for integrated flow amount
This is used when the value of instantaneous flow amount × ∆T/T is 0 to 1.
Setting value to specify unit scaling
0
1
2
3
4
Previous amount
Stored integrated flow amount value before integral processing
High-speed conversion of 20μs/ch
L60AD4
L60DA4
Unit scaling
1
10
100
1000
10000
High resolution of 1/20000
L60AD4
L60DA4
Take advantage of CPU performance with 20μs/ch highspeed analog conversion rates.
An extremely fine level of control is possible with high
resolution (1/20000) in all ranges.
High conversion accuracy of ±0.1%
Ensure stability with variable conversion speed
L60AD4
L60DA4
Experience more reliable control with conversion
accuracy as high as ±0.1%.
41
T (ms)
1000
60000
3600000
L60AD4
The conversion speed can be switched between
20μs/ch, 80μs/ch, and 1ms/ch. By selecting the
appropriate conversion speed according the connected
device's specifications, stable analog input signals can
be obtained even in noisy environments.
L60AD4
L60DA4
GX Works2 contains support tools to help configure
intelligent function modules. All of the required
information to configure and revise complicated
parameter settings is included so it is not necessary to
reference a manual.
L series Features
Configure modules without the need to reference a manual
CPU
Setting details are listed so referencing the manual is unnecessary.
I/O
■ Specifications
Item
Number of analog input points
Voltage
Analog
input
Current
-10 to 10VDC (Input resistance value 1MΩ)
0 to 20mADC (Input resistance value 250Ω)
When using
scaling function
Digital output value
0 to 10V
0 to 5V
0 to 20000
1 to 5V
Voltage
External power supply
1 to 5V
200μV
1 to 5V
(Extended mode)
-5000 to 22500
200μV
-20000 to 20000
307μV*1
0 to 20000
Voltage
-10 to 10V
Users range setting
0 to 20mA
Current
4 to 20mA
Users range setting
Digital value
Resolution
250μV
0 to 20000
-20000 to 20000
0 to 20000
-20000 to 20000
200μV
500μV
333μV*1
1000nA
800nA
700nA*1
1000nA
800nA
4 to 20mA
(Extended mode)
-5000 to 22500
800nA
Users range setting
-20000 to 20000
1230nA*1
Within ±0.1% (±20digit)
Within ±0.1% (voltage: ±10mV, current: ±20μA)
Within ±0.2% (±40digit)
Within ±0.3% (voltage: ±30mV, current: ±60μA)
20μs/ch
—
Available
24VDC (+20%/-15%)
Ripple, spike 500mVP-P or lower
Inrush current: 4.3A, 1000μs or shorter
Current consumption: 0.18A
High-Speed
Counter
High speed: 20μs/ch
Medium speed: 80μs/ch*2*3
Low speed: 1ms/ch*3*4
Voltage: ±15V, Current: 30mA*5
—
—
—
—
—
Positioning
Absolute maximum input
Output short protection
250μV
500μV
4 to 20mA
Conversion speed
0 to 5V
-20000 to 20000
0 to 20mA
Analog output range
500μV
-10 to 10V
Users range setting
Current
Resolution
Simple Motion
I/O characteristics, resolution
Ambient temperature
25±5°C
Ambient temperature
0 to 55°C
-10 to 10VDC (External load resistance value 1kΩ to 1MΩ)
0 to 20mADC (External load resistance value 0Ω to 600Ω)
-20480 to 20479
-32768 to 32767
Analog input range
Accuracy
L60DA4 [ Analog output module ]
4 points (ch)
Analog /
Temperature Control
Digital
output
L60AD4 [ Analog input module ]
Serial
Communication
Maximum number of modules
Counts as 1 module
specification
Number of occupied I/O points
16 points (I/O assignment: Intelligent 16 points)
External connections
18-point terminal block
5VDC internal current consumption
0.52A
0.16A
Weight
0.19kg
0.20kg
*1: Maximum resolution in users range settings.
*2: The default value is 80μs/channel.
*3: The logging function can be used only in the middle speed (80μs/channel) or low speed (1ms/channel).
*4: The flow amount integration function can be used only in the low speed (1ms/channel).
*5: Maximum instantaneous current value that will not cause destruction of the internal components. The maximum constant input current value is 24mA.
Network
42
Analog / Temperature Control
Temperature Control Modules
■L
60TCTT4
Thermocouple
4
Temperature
input points
points (channels)
Standard
control
Self-tuning
function
Peak current
suppression
function
Temperature
input mode
Temperature
control mode
Heating-cooling
control
Simultaneous
Selectable
temperature
sampling cycle
rise function
GX Works2
Error history
■L
60TCTT4BW
Thermocouple
4
Temperature
input points
points (channels)
Standard
control
Heating-cooling
control
Self-tuning
function
Peak current
suppression
function
Simultaneous
Selectable
temperature
sampling cycle
rise function
Temperature
input mode
Temperature
control mode
Heater
disconnection
detection function
Standard
control
Heating-cooling
control
GX Works2
Error history
■L
60TCRT4
Platinum RTD
4
Temperature
input points
points (channels)
Self-tuning
function
Peak current
suppression
function
Temperature
input mode
Temperature
control mode
Simultaneous
Selectable
temperature
sampling cycle
rise function
GX Works2
Error history
■L
60TCRT4BW
Platinum RTD
4
Temperature
input points
points (channels)
Heating-cooling
control
Self-tuning
function
Peak current
suppression
function
Simultaneous
Selectable
temperature
sampling cycle
rise function
Temperature
input mode
Temperature
control mode
Heater
disconnection
detection function
GX Works2
Error history
43
Standard
control
L series Features
Highly stable temperature control
[ Standard control/heating and cooling control ]
Prevent overheating and overcooling in devices which require a high level of temperature stability, such as in an
extrusion molding machine.
In addition to standard temperature control (heating or cooling), control of cooling may be performed.
Furthermore, mix control (a combination of heating and cooling control) can be performed.
The temperature of the object is controlled by adjusting the
heater output based on the PID calculations resulting from the
temperature sensor input.
■ Example: Heating-cooling control
CPU
■ Example: Standard control (heating only)
(heating and cooling elements controlled simultaneously)
Heating is performed when the control object's temperature is lower
than the target temperature, and cooling is performed when it is hotter
or the humidity needs to be reduced.
Temperature sensor input
Temperature sensor input
I/O
Refrigeration
unit
Control output
(cooling)
Control output (heating)
Control output (heating)
Heater coil
Heater coil
Analog /
Temperature Control
Reduce running costs by taking advantage of the energy-saving effect
The maximum power supply capacity requirement is lowered.
We can save money on our electricity contract!
Power control unit
(conditioning)
Switch gear
Switch gear
Channel
CH1 - CH4
Switch gear
Channel
CH1 - CH4
Positioning
Channel
CH1 - CH4
Switch gear
Simple Motion
[ Peak current control function ]
This function reduces the peak current by automatically
adjusting the upper bound and output limiter of each
channel and dividing transistor output timing.
Output timing can be split between up to 4 outputs.
Channel
CH1 - CH4
When two or more loads are being controlled, the peak current can be minimized by spreading the total load out over time.
■ Without peak current control function
■ With peak current control function
20s
5s
5s
High-Speed
Counter
20s
5s
5s
CH1
Transistor
output
CH2
Transistor
output
The output
timing is offset
Serial
Communication
CH3
Transistor
output
CH4
Transistor
output
Because all transistor outputs are turned on
at the same time, the peak current is high.
By controlling the output timing,
the peak current can be reduced by 75%.
Peak
current
The peak current
is reduced.
Network
It is possible to space the outputs out over a longer period of time.
44
Analog / Temperature Control
Ensures uniform temperature control
[ Simultaneous temperature rise function ]
Ensures uniform temperature control by synchronizing the temperature arrival times from multiple loops.
Perform a uniform temperature rise using two or more control loops without going over temperature or resulting in
unexpected thermal expansion.
A "no idling" format increases energy efficiency and reduces running costs.
■ Example: Temperature control of injection molding machine
Heating coils
Part mold
Heating cylinder
■ Example: Wafer heating process for semiconductor manufacturing
Wafer
Hot plate
■ Without the simultaneous temperature rise function
Temperature
Setting value 1
Setting value 2
Setting value 3
Setting value 4
CH2
Temperature
measurements
Setting
value 1
Setting
value 2
Setting
value 3
Setting
value 4
The running costs is reduced!
■ With the simultaneous temperature rise function
CH3
CH4
Temperature Temperature
measurements measurements
Temperature
Setting value 1
Setting value 2
Setting value 3
Setting value 4
CH1
Temperature
measurements
CH2
Temperature
measurements
CH3
Temperature
measurements
Simultaneous temperature
rise completion
CH1
Temperature
measurements
CH4
Temperature
measurements
Time
CH1 CH2
CH3
The time it takes each channel to reach it's set value is
matched to the slowest time of CH4.
CH4
Temperature rise completion
Time
Using this function, it is possible to coordinate the control of two or more loops to reach their target values (SV) at the
same time. Control the simultaneous rise in temperature of separate loops by setting a channel group (Max. 2 groups).
This is an effective way to control applications where differing target temperature arrival times can result in undesirable
temperature differentials.
Support a range of system requirements
[ Sampling cycle change function ]
Choose a sampling cycle of 250 ms/4 channels or 500 ms/4
channels.
CH1 PID
operation
CH2 PID
operation
CH3 PID
operation
CH4 PID
operation
CH1 PID
operation
CH2 PID
operation
Sampling period
Sampling period
Sampling period: The time it takes to execute a PID operation for all channels
(CHn) before beginning the PID operation of the present channel (CHn) again is
called a sampling period.
Temperature input mode
This function allows the temperature control module to be used as
a standard temperature input module.
Using the switch setting, it is possible to easily change the input
mode.
45
Temperature sensor input
■ Specifications
L60TCTT4
L60TCTT4BW
L60TCRT4
L60TCRT4BW
Transistor output
Number of temperature input points
4 points (ch)
Thermocouple
Applicable temperature sensors
Resistive thermal device
Ambient temperature: 25 ± 5°C
Indication accuracy
Accuracy*1
L series Features
Item
Control output
Full scale × (±0.3%)
Ambient temperature: 0 to 55°C
Full scale × (±0.7%)
Temperature process value (PV):
Cold junction temperature -100°C or more
compensation accuracy: Temperature process value (PV):
(ambient temperature:
-150 to -100°C
0 to 55°C)
Temperature process value (PV):
Within ± 1.0°C
—
CPU
Within ± 2.0°C
Within ± 3.0°C
-200 to -150°C
250ms/4 channels
500ms/4 channels
Sampling cycle
Control output cycle
0.5 to 100.0s
Input impedance
1MΩ
Input filter
0 to 100s (0: Input filter OFF)
-50.00 to 50.00%
Sensor correction value setting
Upscale processing
Temperature control method
I/O
Operation at sensor input disconnection
PID ON/OFF pulse or two-position control
PID constants range
PID constants setting
Can be set by auto tuning.
Proportional band (P)
0.0 to 1000.0% (0: Two-position control)
Integral time (I)
0 to 3600s (set 0 for P control and PD control.)
Derivative time (D)
0 to 3600s (set 0 for P control and PI control.)
Within the temperature range set in the thermocouple/platinum resistance thermometer to be used
Set value (SV) setting range
Dead band setting range
0.1 to 10.0%
Output signal
Rated load voltage
10 to 30VDC
Max. load current
Transistor output
Analog /
Temperature Control
ON/OFF pulse
0.1A/point, 0.4A/common
Max. inrush current
0.4A 10ms
Leakage current at OFF
0.1mA or less
Max. voltage drop at ON
1.0VDC (TYP) at 0.1A 2.5VDC (MAX) at 0.1A
Response time
OFFON: 2ms or less, ONOFF: 2ms or less
Number of accesses to non-volatile memory
Max. 1012 times
Insulation method
Simple Motion
Between input terminal and programmable controller power supply: Transformer insulation
Between input channels: Transformer insulation
Between input terminal and programmable controller power supply: 500VAC for 1 minute
Between input channels: 500VAC for 1 minute
Dielectric withstand voltage
Between input terminal and programmable controller power supply: 500VDC 20MΩ or more
Between input channels: 500VDC 20MΩ or more
Insulation resistance
Current sensor
Heater disconnection
detection specifications
—
Input accuracy
• CTL-12-S36-8
(0.0 to 100.0A)*2 *3
• CTL-12-S36-10
(0.0 to 100.0A)*2
• CTL-12-S56-10
(0.0 to 100.0A)*2
• CTL-6-P
(0.00 to 20.00A)*2 *3
• CTL-6-P-H
(0.00 to 20.00A)*2
—
Full scale × (±1.0%)
Number of alert delay
Full scale × (±1.0%)
3 to 255
Maximum number of modules specification
3 to 255
Counts as 1 module
Counts as 2 modules
18-point terminal block
18-point terminal block × 2
18-point terminal block
5VDC internal current consumption
0.30A
0.33A
0.31A
0.35A
Weight
0.18kg
0.33kg
0.18kg
0.33kg
Number of occupied I/O points
Positioning
• CTL-12-S36-8
(0.0 to 100.0A)*2 *3
• CTL-12-S36-10
(0.0 to 100.0A)*2
• CTL-12-S56-10
(0.0 to 100.0A)*2
• CTL-6-P
(0.00 to 20.00A)*2 *3
• CTL-6-P-H
(0.00 to 20.00A)*2
Counts as 1 module
Counts as 2 modules
16 points (I/O assignment: Intelligent 16 points)
External connections
18-point terminal block × 2
High-Speed
Counter
*1:Calculate the accuracy in the following method (only when it is not affected by noise).
Accuracy (°C) = full scale × indication accuracy + cold junction temperature compensation accuracy
Ex.) Accuracy at the input range of 38 (-200.0 to 400.0°C), the operating ambient temperature of 35°C, and the temperature process value (PV) of 300°C
(Full scale) × (indication accuracy) + cold junction temperature compensation accuracy
= (400.0°C - (-200.0°C)) × (±0.007) + (±1.0°C)
= ± 5.2°C
*2:U.R.D.Co., LTD. For more information, visit http://www.u-rd.com/
*3:The CTL-12-S36-8 and CTL-6-P can be used although they have been discontinued.
■ Control mode
Contents
Number of controllable loops
Performs the standard control of four channels.
Standard control 4 loops
Heating-cooling control (normal mode)
Performs the heating-cooling control. CH3 and CH4 cannot be used.
Heating-cooling control 2 loops
Heating-cooling control (expanded mode)
Performs the heating-cooling control. The number of loops is expanded using an output module and others in the system. Heating-cooling control 4 loops
Mix control (normal mode)
Performs the standard control and the heating-cooling control. CH2 cannot be used.
Standard control 2 loops
Heating-cooling control 1 loop
Mix control (expanded mode)
Performs the standard control and the heating-cooling control. The number of loops is expanded using an output
module and others in the system.
Standard control 2 loops
Heating-cooling control 2 loops
Serial
Communication
Control mode
Standard control
Control for each channel is as follows.
Standard control
CH1
Heating-cooling control
Mix control
Normal mode
Expanded mode
Normal mode
Expanded mode
Standard control
Heating-cooling control
Heating-cooling control
Heating-cooling control
Heating-cooling control
CH2
Standard control
Heating-cooling control
Heating-cooling control
—*
Heating-cooling control*2
CH3
Standard control
—*1
Heating-cooling control*2
Standard control
Standard control
CH4
Standard control
—*1
Heating-cooling control*2
Standard control
Standard control
1
Network
Channel
*1:Only temperature measurement using a temperature input terminal can be performed.
*2:Heating-cooling control is performed using an output module in the system.
46
Simple Motion
High
iQ Platform
compatible
motion
controller
Servo function and performance
Stand-alone
motion controller
Simple
motion module
Simple
motion module
LD77MH4
LD77MH16
Positioning module
LD75D4
LD75D2
LD75D1
Introducing simple motion
control, evolved
LD75P4
LD75P2
LD75P1
The MELSEC-L series includes simple motion and general positioning
modules.
When used together, various possibilities become available such as synchronous
control which was previously only possible using motion controllers.
Low
1 axis
4 axes
8 axes
16 axes
32 axes
Number of control axes
Simple Motion Modules
■ LD77MH4
Number of control
axes
4 axes
Connection system
SSCNET 3
-compatible
Positioning
Speed/torque
control function control function
Synchronous control
function
Synchronous control
function
Manual pulse
generator operation
function
OPR control
function
External encoder
■ LD77MH16
Number of control
axes
16 axes
Cam
Connection system
SSCNET 3
-compatible
Positioning
Speed/torque
control function control function
Synchronous control
function
Synchronous control
function
Manual pulse
generator operation
function
OPR control
function
External encoder
Cam
Positioning data
600 data/axis
4-axis
interpolation
(Linear interpolation)
2-axis
interpolation
(Circular interpolation)
Synchronous control
function
Phase compensation
Positioning data
600 data/axis
4-axis
interpolation
(Linear interpolation)
2-axis
interpolation
(Circular interpolation)
Synchronous control
function
Phase compensation
*SSCNET(Servo System Controller NETwork)
47
L series Features
Countless applications are possible
A variety of control types including positioning control, speed control, torque control, cam control and synchronous
control can be implemented easily with simple parameter settings and a sequence program.
XY table
Sealant application
•• 2-axis linear interpolation
•• 2-axis circular interpolation
•• 3-axis linear interpolation
•• Continuous orbit control
•• Continuous orbit control
•• High-speed, high-accuracy orbit
calculation
•• Linear/circular interpolation
CPU
[ Positioning control ]
•• Support for a multitude of applications thanks to a wide
variety of control formats including linear interpolation control
(up to 4 axes), 2-axis circular interpolation control, fixed feed
control and continuous orbit control.
•• Use a sequence program to set the positioning address,
speed, etc. for easy automatic operation.
•• Quickly implement powerful auxiliary functions such as step
operation, target position change, M codes, and the skip
function.
Z
r1
r2
X
Z
X
Y
Y
I/O
[ Speed control and torque control ]
•• Tension control applications such as winding and rewinding
are supported.
•• Switch from positioning control, to speed and torque control,
and back to positioning control.
Because the present location is tracked even in speed and
torque control mode, it is possible to maintain the current
absolute position when returning to positioning control.
Tension detector
Winding
axis
Tension detector
Servomotor
Servomotor
Analog /
Temperature Control
Unwinding
axis
Servomotor
[ Cam control ]
•• Cam control may be used alone or combined with synchronous control.
Positioning control
Simple Motion
Example application for cam control:
To create a movement path around a workpiece using
positioning control, axis 2 waits for axis 1 to complete
the move from P1 to P2 before it begins moving from
P2 to P3. By using cam control, axis 2 does not need
to wait for axis 1 to complete its movement and the in
position time can be shortened.
Axis 1 motor speed
Axis 1 BUSY signal
P3
Workpiece
Axis 2 motor speed
Cam control
P2
Axis 1 motor speed
Cam data
Axis 2 motor speed
Positioning
P1
Cam data
Time shortening
Many functions in a compact design
Rotary cutter
High-Speed
Counter
[ Use a synchronous encoder with synchronous control ]
•• Input pulses from a synchronous encoder can be used to perform
synchronous control and cam control.
•• Connect an incremental synchronous encoder directly to the LD77MH
built-in interface, or connect an absolute synchronous encoder SOON via
servo amplifier. Option modules are no longer necessary.
•• To Further improve the synchronization accuracy, the phase compensation
function, designed to compensate for synchronous encoder delays, can be
used.
INC
synchronous
encoder
Mark sensor
Serial
Communication
[ Standard mark detection function ]
•• The built-in mark detection signal interface allows these units to be used in
packaging systems for example, without additional option modules.
Sheet
synchronization
width
Sheet synchronization width
Synchronous axis length
Input
Time
Sheet
synchronization
width
Network
Sheet length
Cam data
Stroke ratio
Cam resolution
Sheet length
HMI (GOT)
Speed
[ Automatic cam data generation for rotary cutter ]
•• Complicated cam data for rotary cutters can
be automatically generated just by specifying
a few parameters like the sheet length and
synchronization width.
Time
48
Simple Motion
Perfect synchronous control is easy to achieve
Replace mechanical gears, shafts, speed change
gears, cams, etc. and generate synchronous control
operations using software.
•• Complicated programs are unnecessary for synchronous
control because it can be implemented easily using
parameter settings.
•• Start and stop synchronous control for each axis.
Use the synchronous control axis and positioning control axis
together.
•• Convey the travel value of main shaft to the output axis via
the clutch.
Synchronous Control Parameter Settings
Cam control made simple
Create cam data patterns easily.
•• Create cam profiles unrestricted by existing concepts of electronic cam control.
•• Change the acceleration, speed, stroke, and jerk while simultaneously seeing how it effects the profile.
•• Easily check created cam data by viewing them as thumbnails.
•• Import and export cam data in CSV format.
Cam Data
Cam Data List
Simplified debugging and commissioning
[ Digital oscilloscope function ]
•• Collection of data from the Simple Motion Module is
synchronized with the operation cycle and waveform displays
to facilitate an efficient start up.
•• The assistant function explains each step.
•• Use the purpose-based probe setting to easily set frequentlyviewed data.
•• Sample 16CH word and 16CH bit data and display 8CH
words and 8CH bits in real time.
Digital Oscilloscope
49
[ Monitor and test functions ]
•• Complete the system installation and perform operational
checks easily using powerful monitor and test functions.
•• Select items to be displayed on the monitor using a wealth of
information monitoring options.
•• The test function can be used to check basic operations without
a sequence program.
Axis Monitor
Positioning Test
■ Specifications
Control system
Linear control
Position
control
1-axis speed control, 2-axis speed control, 3-axis speed control, 4-axis speed control
INC mode, ABS mode
INC mode
Changing to a new current value using the positioning data , Changing to a new current value using the start No.
Provided
Unconditional JUMP, Conditional JUMP
Provided
Block start, Condition start, Wait start, Simultaneous start, Repeated start
Provided
Provided
Possible to connect 1 module (Incremental)
Unit magnification (1 to 10000times)
Speed control without positioning loops, Torque control without positioning loops
Connect a battery to the servo amplifier to ensure compatibility
Up to 4 channel (internal interface , servo amplifier, via the PLC CPU interface )
1channel (Incremental)
Support coming soon
Speed limit value, JOG speed limit value
Torque limit value_same setting, torque limit value_individual setting
valid/invalid setting
Movable range check with current feed value, movable range check with machine feed value
Provided
Provided
Provided
Simple Motion
Provided
Positioning
Provided
Target position address and target position speed are changeable
Provided
Deceleration unit step, Data No. unit step
Via sequence CPU, Via external command signal
Provided
Mark detection mode (Continuous Detection mode, Specified Number of Detections mode, Ring Buffer mode)
4points
4
16
4points/axis
Provided
Provided
bit data :8channels, word data: 4channels
bit data :16channels, word data: 16channels *2
0.88ms
50m
Counts as 2 modules
32 points (I/O assignment: Intelligent 32 points)
SSCNET ΙΙΙ-compatible (50Mbps)
0.55A
Network
Maximum connection distance between drive units
Maximum number of modules specification
Number of occupied I/O points
Servo amplifier connection system
5VDC internal current consumption
Weight
Serial
Communication
Starting time*3
1-axis linear control
1-axis speed control
2-axis linear interpolation control (Composite speed)
2-axis linear control (Reference axis speed)
2-axis circular interpolation control
2-axis speed control
3-axis linear interpolation control (Composite speed)
3-axis linear interpolation control (Reference axis speed)
3-axis speed control
4-axis linear interpolation control
4-axis speed control
High-Speed
Counter
Mark detection
Mark detection signal
function
Mark detection setting
Optional data monitor function
Master-slave operation function
Amplifier-less operation function
Digital oscilloscope function
sub point designation, center point designation
Analog /
Temperature Control
Expansion
Speed-torque control
control
Absolute position system
Synchronous encoder interface
Internal interface
Via servo amplifier
Speed limit function
Torque limit function
Functions that
Forced stop function
limit control
Software stroke limit function
Hardware stroke limit function
Speed change function
Override function
Functions that
Acceleration/deceleration time
change control
change function
details
Torque change function
Target position change function
M code output function
Step function
Other functions
Skip function
Teaching function
I/O
Fixed-feed control
2-axis circular
interpolation control
Speed control
Position control
Speed-position switching control
Position-speed switching control
Current value changing
NOP instruction
Other
control
JUMP instruction
LOOP,LEND
High-level positioning control
JOG operation
Inching operation
Manual control
Manual pulse generator operation
LD77MH4
LD77MH16[NEW]
4 axes
16 axes
0.88ms
0.88ms/1.77ms*1
Linear interpolation(Up to 4 axes),Circular interpolation(2 axes)
PTP (Point To Point) control, path control (both linear and arc can be set), speed control,
torque control, speed-position switching control, position-speed switching control
Trapezoidal acceleration/deceleration, S-pattern acceleration/deceleration
Backlash compensation, Electronic gear, Near pass function
External encoder, Cam, Phase Compensation, Cam generated automatically
mm, inch, degree, pulse
600 data (positioning data No. 1 to 600)/ axis (Can be set with GX Works2 or PLC program.)
Parameters, positioning data, and block start data can be saved on flash ROM (battery-less backup)
Near-point dog method, Count method 1), Count method 2), Data set method, scale origin signal detection method
Provided
OPR retry, OP shift
1-axis linear control, 2-axis linear interpolation control, 3-axis linear interpolation control, 4-axis linear interpolation control
(Composite speed, Reference axis speed)
1-axis fixed-feed control, 2-axis fixed-feed control, 3-axis fixed-feed control, 4-axis fixed-feed control
CPU
Acceleration/deceleration process
Compensation function
Synchronous control
Control unit
Positioning data
Backup
Machine OPR control
OPR control
Fast OPR control
Sub functions
L series Features
Item
Number of control axes
Operation cycle
Interpolation function
0.70A
0.22kg
*1: Default value is 1.77 ms. If necessary, check the operation time and change to 0.88 ms.
*2: 8CH word data and 8CH bit data can be displayed in real time.
*3: The starting time varies with conditions. For details, refer to the manual.
50
Positioning
Positioning Modules
■L
D75P1
■L
D75D1
Open collector
Differential driver
NEW
NEW
Number of control
axes
1 axis
Max. output pulse
200kpulse/s
Number of control
axes
1 axis
Max. output pulse
4Mpulse/s
Positioning data
600 data/axis
Max. connection
distance
2m
Positioning data
600 data/axis
Max. connection
distance
10m
Positioning
control
function
Speed control
function
Positioning
control
function
Speed control
function
OPR control
function
Error history
OPR control
function
Error history
GX Works2
■L
D75P2
■L
D75D2
Open collector
Differential driver
NEW
NEW
Number of control
axes
2 axes
Max. output pulse
200kpulse/s
Number of control
axes
2 axes
Max. output pulse
4Mpulse/s
Positioning data
600 data/axis
Max. connection
distance
2m
Positioning data
600 data/axis
Max. connection
distance
10m
Positioning
control
function
Speed control
function
Positioning
control
function
Speed control
function
OPR control
function
Error history
OPR control
function
Error history
GX Works2
■ LD75P4
GX Works2
■ LD75D4
Open collector
51
GX Works2
Differential driver
Number of control
axes
4 axes
Max. output pulse
200kpulse/s
Number of control
axes
4 axes
Max. output pulse
4Mpulse/s
Positioning data
600 data/axis
Max. connection
distance
2m
Positioning data
600 data/axis
Max. connection
distance
10m
Positioning
control
function
Speed control
function
Positioning
control
function
Speed control
function
OPR control
function
Error history
OPR control
function
Error history
GX Works2
GX Works2
LD75D1
LD75D2
LD75D4
Control high resolution devices such as linear servos and direct drive motors without compromising speed.
Max. output pulse
Max. connection distance
LD75D1, LD75D2, LD75D4
4Mpulse/s
10m
LD75P1, LD75P2, LD75P4
200kpulse/s
2m
L series Features
High-speed control of high resolution devices
CPU
Reduce machine vibration by using the optimal acceleration/deceleration system
Speed
Speed
I/O
Chosen between trapezoidal acceleration/deceleration
or S-curve acceleration/deceleration in accordance with
machine characteristics such as the amount of load or
vibration characteristics.
*S-curve acceleration/deceleration cannot be used with stepping motors.
Time
Trapezoidal acceleration/deceleration
Is a system in which the acceleration and
deceleration changes linearly based on
acceleration/deceleration time and the
speed-limit value set by users.
Time
Simple Motion
Visualize positioning module buffer data
Analog /
Temperature Control
S-curve acceleration/deceleration
Is a system in which acceleration/
deceleration changes gradually based
on acceleration/deceleration time,
speed-limit, and the S-curve ration
value (1 to 100%).
Monitor online or save and review command data such as speed, simultaneous start, and dual axis interpolation
routines using customizable graphs.
Positioning
Trace function - location trace display
High-Speed
Counter
Trace function - waveform display
Configure modules without the need to reference a manual
Serial
Communication
GX Works2 contains support tools to help configure intelligent
function modules. All of the required information to configure
and revise complicated parameter settings is included so it is not
necessary to reference a manual.
Network
Configure modules easily and with no manual thanks to the included settings information.
52
Positioning
■ Specifications
[ Open collector ]
Item
Number of control axes
Interpolation function
Control system
Control unit
Positioning data
Backup
PTP*1 control
Positioning
Speed-position switching control
control
Position-speed switching control
system
Path control
In ABS system
Positioning In INC system
control
range
Positioning
In speed-position switching
control
control (INC mode)/
position-speed switching control
In speed-position switching
control (ABS mode)*2
Speed command
Acceleration/deceleration system selection
Acceleration/deceleration time
Sudden stop deceleration time
OPR method
Starting time*3
LD75P1 NEW
1 axis
LD75P2 NEW
LD75P4
2 axes
4 axes
2-axis linear interpolation
2-axis/3-axis/4-axis linear interpolation,
—
2-axis circular interpolation
2-axis circular interpolation
PTP (Point To Point) control,
path control (both linear and arc can be set),
speed control, speed-position switching control,
position-speed switching control
mm, inch, degree, pulse
600 data (positioning data No.1 to 600)/axis
(Can be set with peripheral device or sequence program.)
Parameters, positioning data, and block start data can be saved on flash ROM (battery-less backup)
INC system, ABS system
INC system, ABS system*2
INC system
INC system, ABS system
-214748364.8 to 214748364.7 (μm)
-21474.83648 to 21474.83647 (inch)
0 to 359.99999 (degree)
-2147483648 to 2147483647 (pulse)
-214748364.8 to 214748364.7 (μm)
-21474.83648 to 21474.83647 (inch)
-21474.83648 to 21474.83647 (degree)
-2147483648 to 2147483647 (pulse)
0 to 214748364.7 (μm)
0 to 21474.83647 (inch)
0 to 21474.83647 (degree)
0 to 2147483647 (pulse)
0 to 359.99999 (degree)
0.01 to 20000000.00 (mm/min)
0.001 to 2000000.000 (inch/min)
0.001 to 2000000.000 (degree/min)
1 to 4000000 (pulse/s)
Trapezoidal acceleration/deceleration, S-curve acceleration/deceleration
1 to 8388608ms
Four patterns can be set for each of acceleration time and deceleration time
1 to 8388608ms
6 types
1-axis linear control
1-axis speed control
2-axis linear interpolation control (Composite speed)
2-axis linear control (Reference axis speed)
2-axis circular interpolation control
2-axis speed control
3-axis linear interpolation control (Composite speed)
3-axis linear interpolation control (Reference axis speed)
3-axis speed control
4-axis linear interpolation control
4-axis speed control
Pulse output method
Open collector output
Maximum output pulse
200k pulse/s
Maximum connection distance between drive units
2m
Maximum number of modules specification
Counts as 2 modules
Number of occupied I/O points
32 points (I/O assignment: Intelligent 32 points)
External connections
40-pin connector
5VDC internal current consumption
0.44A
0.48A
Weight
0.18kg
*1: The abbreviation for Point To Point, referring to position control.
*2: In speed-position switching control (ABS mode), "degree" is the only control unit available.
*3: Starting times may vary depending on conditions. For details, refer to the manual.
53
1.5ms
1.5ms
1.5ms
1.5ms
2.0ms
1.5ms
1.7ms
1.7ms
1.7ms
1.8ms
1.8ms
40-pin connector ×2
0.55A
Item
Number of control axes
Interpolation function
Control system
Positioning data
Backup
PTP*1 control
Positioning
Speed-position switching control
control
Position-speed switching control
system
Path control
Positioning In INC system
control
range
Positioning
In speed-position switching
control
control (INC mode)/
position-speed switching control
Speed command
Acceleration/deceleration system selection
Acceleration/deceleration time
Starting time*3
High-Speed
Counter
Pulse output method
Differential driver output
Maximum output pulse
4M pulse/s
Maximum connection distance between drive units
10m
Maximum number of modules specification
Counts as 2 modules
Number of occupied I/O points
32 points (I/O assignment: Intelligent 32 points)
External connections
40-pin connector
5VDC internal current consumption
0.51A
0.62A
Weight
0.18kg
*1: The abbreviation for Point To Point, referring to position control.
*2: In speed-position switching control (ABS mode), "degree" is the only control unit available.
*3: Starting times may vary depending on conditions. For details, refer to the manual.
1.5ms
1.5ms
1.5ms
1.5ms
2.0ms
1.5ms
1.7ms
1.7ms
1.7ms
1.8ms
1.8ms
Positioning
1-axis linear control
1-axis speed control
2-axis linear interpolation control (Composite speed)
2-axis linear control (Reference axis speed)
2-axis circular interpolation control
2-axis speed control
3-axis linear interpolation control (Composite speed)
3-axis linear interpolation control (Reference axis speed)
3-axis speed control
4-axis linear interpolation control
4-axis speed control
Simple Motion
Sudden stop deceleration time
OPR method
0 to 359.99999 (degree)
0.01 to 20000000.00 (mm/min)
0.001 to 2000000.000 (inch/min)
0.001 to 2000000.000 (degree/min)
1 to 4000000 (pulse/s)
Trapezoidal acceleration/deceleration, S-curve acceleration/deceleration
1 to 8388608ms
Four patterns can be set for each of acceleration time and deceleration time
1 to 8388608ms
6 types
Analog /
Temperature Control
In speed-position switching
control (ABS mode)*2
I/O
In ABS system
LD75D2 NEW
LD75D4
2 axes
4 axes
2-axis linear interpolation
2-axis/3-axis/4-axis linear interpolation,
—
2-axis circular interpolation
2-axis circular interpolation
PTP (Point To Point) control,
path control (both linear and arc can be set),
speed control, speed-position switching control,
position-speed switching control
mm, inch, degree, pulse
600 data (positioning data No.1 to 600)/axis
(Can be set with peripheral device or sequence program.)
Parameters, positioning data, and block start data can be saved on flash ROM (battery-less backup)
INC system, ABS system
INC system, ABS system*2
INC system
INC system, ABS system
-214748364.8 to 214748364.7 (μm)
-21474.83648 to 21474.83647 (inch)
0 to 359.99999 (degree)
-2147483648 to 2147483647 (pulse)
-214748364.8 to 214748364.7 (μm)
-21474.83648 to 21474.83647 (inch)
-21474.83648 to 21474.83647 (degree)
-2147483648 to 2147483647 (pulse)
0 to 214748364.7 (μm)
0 to 21474.83647 (inch)
0 to 21474.83647 (degree)
0 to 2147483647 (pulse)
CPU
Control unit
LD75D1 NEW
1 axis
L series Features
■ Specifications
[ Differential driver ]
40-pin connector ×2
0.76A
Serial
Communication
Network
54
High-Speed Counter
High-Speed Counter Modules
■ LD62
DC input
■ LD62D
Differential input
Number of channels
2ch
5/12/24VDC
input
Max. counting speed
200kpulse/s
Linear counter
function
Ring counter
function
Coincidence
output function
Disable count
function
Latch counter Sampling counter Periodic pulse
function
function
counter function
Preset
function
Number of channels
2ch
Differential
driver input
Max. counting speed
500kpulse/s
Linear counter
function
Ring counter
function
Coincidence
output function
Disable count
function
Latch counter Sampling counter Periodic pulse
function
function
counter function
Preset
function
High-speed pulse measurement of 500kpulse/s
LD62D
It is easy to achieve accurate measurement of high
speed pulses using the LD62D.
Due to the wide range of supported pulse speeds,
the module is capable of supporting many different
applications including various conveyor systems, work
piece length measurement, and processing speed
measurement.
Fixed feeding (drilling holes)
Drill
Pulse
Temporary stop
(coincidence output)
Configure modules without the need to reference a manual
GX Works2 contains support tools to help configure
intelligent function modules. All of the required
information to configure and revise complicated
parameter settings is included so it is not necessary to
reference a manual.
Configure modules easily and with no manual thanks to the included settings information.
55
LD62D
LD62
■ Specifications
LD62 [DC input]
Maximum counting speed*1
Counting range
Type
10kpulse/s, 100kpulse/s, 200kpulse/s
10kpulse/s, 100kpulse/s, 200kpulse/s, 500kpulse/s
1-phase input (multiple of 1/2), CW/CCW, 2-phase input (multiple of 1/2/4)
EIA Standard RS-422-A differential type line driver level
5/12/24VDC 2 to 5mA
(Equivalent with AM26LS31 (manufactured by Texas Instruments Japan Limited))
200kpulse/s
500kpulse/s
-2147483648 to 2147483647
UP/DOWN preset counter and ring counter functions
Minimum count pulse width
(Duty ratio 50%)
10kpulse/s
100kpulse/s
200kpulse/s
50μs
5μs
2.5μs
10kpulse/s
100kpulse/s
200kpulse/s
500kpulse/s
50μs
5μs
2.5μs
1μs
Minimum phase differential for 2-phase
input
10kpulse/s
100kpulse/s
200kpulse/s
25μs
2.5μs
1.25μs
10kpulse/s
100kpulse/s
200kpulse/s
500kpulse/s
25μs
2.5μs
1.25μs
0.5μs
External
input
Preset
Function start
Minimum input
response time
Coincidence output
Output voltage/current
5/12/24VDC 2 to 5mA
OFF to ON
ON to OFF
5/12/24VDC 2 to 5mA (Differential type line drivers
conforming to EIA standard RS-422-A are also applicable.)
Function start: 0.5ms
Function start: 1ms
2 points/channel
12 to 24VDC 0.5A
OFF to ON
0.1ms or less (rated load, resistive load)
ON to OFF
Maximum number of modules specification
Counts as 1 module
Number of occupied I/O points
16 points (I/O assignment: Intelligent 16 points)
External connections
40-pin connector
5VDC internal current consumption
0.31A
Weight
0.13kg
*1: The counting speed is affected by the rising/falling pulse speed. For details, refer to the corresponding manual.
Analog /
Temperature Control
External
output
Comparison result
I/O
Binary with 32-bit code
(-2147483648 to 2147483647)
Set value < Count value
Set value = Count value
Set value > Count value
Comparison range
Coincidence
output
CPU
Counter
LD62D [Differential input]
2ch
L series Features
Item
Number of channels
Counting speed switch setting
Phase
Count input
signal
Signal level ( A, B )
Output response time
0.36A
Simple Motion
Positioning
High-Speed
Counter
Serial
Communication
Network
56
Serial Communication
Serial Communication Modules
■ LJ71C24
Interface
Interface
RS-232
RS-422/485
Communication
system
Communication
system
MC protocol
Max. transmission
speed
230.4kbps*
Communication
system
Communication
system
Communication
system
Communication
system
Pre-defined protocol Nonprocedural protocol Bidirectional protocol
GX Works2
Error history
*Available for only channel 1
■ LJ71C24-R2
Interface
RS-232 x 2
Communication
system
MC protocol
Max. transmission
speed
230.4kbps*
Communication
system
Pre-defined protocol Nonprocedural protocol Bidirectional protocol
GX Works2
Error history
*Available for only channel 1
Quick connection using pre-defined protocols
Establish communication with devices quickly by simply selecting a device from the pre-defined protocol library
included in GX Works2.
➀ Select the manufacturer and model (series) of the device
to be connected.
There is no need for complicated predefined protocol setting
for the device. Simply select the device from the prepared
predefined protocol library.
➁ Write the predefined protocol to the module.
Write the set predefined protocol to Serial communication
module. Up to 128 protocols can be set in one module.
Write predefined protocol.
GX Works2
Connected
device
Simply select a device you want
to establish communication with
➂ Execute the protocol with ladder program.
With ladder program, communication with any external device can be made only by executing a dedicated predefined protocol
starting instruction.
Execute dedicated
instruction.
57
Communication starts.
L series Features
Easy to prepare and edit predefined protocol
Even if the device to be connected is not contained in the predefined protocol library, the device can be added easily.
CPU
Click “Add button.”
Select “Add New.”
Item has been added.
The contents of the prepared predefined protocol can be displayed in a list form. The protocol can be edited easily.
I/O
Analog /
Temperature Control
The data can be
edited as needed.
Simple Motion
■ Specifications
Interface
LJ71C24
LJ71C24-R2
RS-232 compliant (D-Sub 9P female)
RS-232 compliant (D-Sub 9P female)
RS-422/485 compliant (2-piece terminal block)
RS-232 compliant (D-Sub 9P female)
Full-duplex/half-duplex communications
Half-duplex communications
Positioning
Communication
system
Item
ch1
ch2
Line
MC protocol
Pre-defined protocol
Nonprocedural protocol
Full-duplex/half-duplex communications
Bidirectional protocol
Synchronization method
Transmission speed
Start bits
Data bits
Parity bits
Stop bits
MC protocol
Access cycle
Sum check code
Transmission control
All protocols and when ODD/EVEN is selected by parameter.
MC protocol/bidirectional protocol selected by parameter.
For the pre-defined protocol, whether or not a sum check code is needed depends on the selected protocol.
Nonprocedural protocol selected by user frame.
DTR/DSR (ER/DR) control
RS/CS control
CD signal control
DC1/DC3 (Xon/Xoff) control
DC2/DC4 control
RS-232
Enabled
Enabled
Enabled
RS-422/485
Disabled
Disabled
Disabled
Enabled
Enabled
Network
Transmission distance RS-232
(Overall distance)
RS-422/485
Maximum number of modules specification
Number of occupied I/O points
5VDC internal current consumption
Weight
Sends each time a send request is issued. Can receive at any time.
Serial
Communication
Error detection
Pre-defined protocol
Nonprocedural protocol
Bidirectional protocol
Parity check
High-Speed
Counter
Data foramat
Start-stop synchronization method
50bps/300bps/600bps/1200bps/2400bps/4800bps/9600bps/14.4kbps/
19.2kbps/28.8kbps/38.4kbps/57.6kbps/115.2kbps/230.4kbps
Transmission speed 230.4kbps is only available for channel 1.
Total transmission speed of two interfaces is available up to 230.4kbps.
Total transmission speed of two interfaces is available up to 115.2kbps when the communication data monitoring function is used.
1
7 or 8
1 (vertical parity) or none
1 or 2
Processes one request during installed C24 CPU module END processing.
(Number of scans that must be processed/number of link scans depends on the contents of the request.)
Sends or receives data when requested with the dedicated instruction (CPRTCL).
• DTR/DSR signal control and DC code control are selected by the user.
Maximum 15m
Maximum 1200m (overall distance)
—
Counts as 1 module
32 points (I/O assignment: Intelligent 32 points)
0.39A
0.26A
0.17kg
0.14kg
58
Network
Seamless integration of multiple networks
Today there is an increasing demand from production facilities for high speed control, effective management of data, flexible wiring, easy parameter settings,
and predictive maintenance. To answer these demands, Mitsubishi Electric has teamed up with the CC-Link Partner Association to provide reliable, openstandards networks that operate seamlessly with one another. Together, These and other Mitsubishi networks allow for flexible integration at any network
level. The latest addition to the CC-Link portfolio is IE Field; an Ethernet based gigabit network designed to provide cost-effective, reliable connectivity to
field devices.
10 0 /
10 Mb
MES
(Manufacturing
Execution System)
ps
Industrial switching HUB
Wireless LAN
Ethernet
Q series
Programmable Controller Engineering Software
MELSOFT GX Works2
CC-Link IE Control
Network Interface Board
1Gbp
s
Laptop
with built-in wireless
Q series
Wireless LAN
1Gbp
s
HMI
(GOT)
Industrial
switching HUB
CC-Link IE Field Network
Master/Local Module
(master station)
Ethernet Adapter Module
Industrial
switching HUB
CC-Link IE Field
Network Head Module
(remote station)
Ethernet
1Gbp
s
CC-Link IE Field Network
Master/Local Module
(local station)
Industrial
switching HUB
10 0 /
10 Mb
CC-Link IE Field Network
Master/Local Module
(local station)
ps
Vision sensor
SERVO SYSTEM CONTROLLER NETWORK
PC
Max
CC-Link/LT
Master Module
(master station)
. 10 M
CC-Link IE Field
Network Head Module
(remote station)
+
Simple Motion Modules
bps
Inverter
Max
Robot
Servo, motor
General I/O
Max
59
CC-Link IE Field Network
Master/Local Module
(master station)
. 2.5
Mbp
s
. 50M
bps
Seamless communication
Ethernet
Enterprise level
network
Within
the factory
Control level
network
Within
the production line
Device level
network
SERVO SYSTEM CONTROLLER NETWORK
Within
the machine or panel
CPU
L series combines enterprise, control, and device level networks together
through Ethernet, MELSECNET/H, and CC-Link networks to allow easy
access to information, no matter where it resides on the network. It is
possible to “drill down” from the top Ethernet layer, through multiple networks,
and access programmable controllers using GX Works2 or other engineering
tools.
In addition, many devices supporting SLMP* such as vision sensors and
RFID controllers may be connected to the CC-Link IE Field network.
*SLMP (SeamLess Message Protocol) is a protocol advocated by the CCLink Partner Association.
L series Features
Between factories
and departments
Device level
network
I/O
This versatile field network integrates distributed control, I/O control,
and motion control. Its flexible wiring design allows for star, line, star
and line mixed, or ring topology to ensure the network can meet the
needs of any production line or equipment layout.
• 1 Gbps high-speed communication
• Maximum link points per network:
Remote inputs/outputs (RX, RY): 16384 points
Remote registers (RWw): 8192 points, (RWr): 8192 points
• Maximum overall distance: 12km
Analog /
Temperature Control
This highly-reliable control network is designed to transfer large
amounts of data at real-time speeds between PLCs. The CC-Link IE
Control network includes a variety of functions and allows seamless
communications among other CC-Link networks.
• 1 Gbps high-speed communication
• Maximum number of link points per network:
Link relays (LB): 32768 points
Link registers (LW): 131072 points
Link inputs/outputs (LX, LY): 8192 points each
• Maximum number of connected stations per network:
max. 120 units
• Maximum overall distance: 66km
*L series does not support the CC-Link IE Controller network.
Simple Motion
SERVO SYSTEM CONTROLLER NETWORK
• Communication speed: 50Mbps
• Communication cycle: 0.44ms/0.88ms
• Connect up to 16 axes per system
• Maximum overall distance: 100m(10mbps)
High-Speed
Counter
• Communication speeds up to 10 Mbps
• 8192 link device remote I/O points and 2048+2048 remote register
points
• Connect with over 1,000 different 3rd party CC-Link compatible
products
• Maximum overall distance: 100m(10mbps)
Specially designed for Mitsubishi servo systems, this networking
technology addresses the need for long distance, noise resistant, high
speed communication. Fiber optical daisy-chain connections improve
reliability and allow for large volumes of data to be shared between
controllers and servo amplifiers in real time.
Positioning
CC-Link is Semiconductor Equipment and Materials International
(SEMI ®) certified and provides an open device level network that allows
great flexibility in system design and configuration. CC-Link provides
the means to link controllers to numerous devices while reducing wiring
costs and adding additional benefits such as improved diagnostic
capabilities.
Serial
Communication
At the bottom of the network hierarchy, sensor level networks can
reduce wiring costs inside panels between simple discrete devices
such as push-buttons and sensors. CC-Link/LT accomplishes this and
is fully supported by L series. Achieve tremendous flexibility and cost
savings through innovative connection technology, which does not
require cutting/stripping of the network cable to make connections.
• Make connections quickly and easily using dedicated connectors
• Use I/O points efficiently by using 'number of points mode' (4 points,
8 points, 16 points).
• Connect up to 1024 link points in 16-point mode.
• Up to 39m from master station(2.5Mbps)
Network
60
Network
CC-Link IE Field Network Master/Local Module
■ LJ71GF11-T2
Master/
local station
Transmission speed
1Gbps
Remote I/O
16384 points
Remote register
8192 words
CC-Link IE Field
*Sequence CPUs whose first five serial number digits are "13012" or later are required.
Easy to configure settings
Network parameters are configured using the engineering tool,
GX Works2. Only the master station needs to be configured,
thereby greatly simplifying the network setup. Updating the
system configuration is a breeze.
Master station settings are all that is required!
Master station
Transfered
master station
parameters
Station #1
Station #2
Station #3
Flexible network topology
Various network topologies are supported including star, line,
star and line combination, and ring. When hubs*1 are used,
new equipment can be added and machine layouts can be
changed easily.
*1 Hubs cannot be used in a ring configuration.
■ Examples of network topologies
[ Line topology ]
Master
station
Local
station
[ Star and line combination topology ]
Remote
station
Remote
station
Master
station
HUB
[ Ring topology ]
Master
station
Local
station
Remote
station
Remote
station
Local
station
Remote
station
HUB
Local
station
Remote
station
■ Specifications
Item
Transmission speed
Line topology
Maximum overall cable distance
Star topology
(Maximum transmission distance)
Ring topology
Master station
Maximum number of connected
stations
Local station
Remote register (RWw)
Remote register (RWr)
Maximum link points per station
Remote input (RX)
Master
station
Local
station
16384 points, 2KB
Remote register (RWw)
Remote register (RWr)
8192 points, 16KB
8192 points, 16KB
Remote input (RX)
16384 points, 2KB
8192 points, 16KB (also including the send range of own station)
Remote register (RWr)
8192 points, 16KB
Remote input (RX)
16384 points, 2KB
Remote output (RY)
16384 points, 2KB (also including the send range of own station)
Communication method
Communication port
RAS function
Connection cable*1
Maximum number of modules specification
Number of occupied I/O points
5VDC internal current consumption
Weight
61
16384 points, 2KB
Remote register (RWw)
Network topology
*1: Straight through cable
16384 points, 2KB
Remote output (RY)
Remote output (RY)
Maximum link
points per station
LJ71GF11-T2
1Gbps
12000m (when cables are connected to 1 master station and 120 slave stations)
Depends on the system configuration
12100m (when cables are connected to 1 master station and 120 slave stations)
1 station (Up to 120 slave stations can be connected to the master station)
120 stations
8192 points, 16KB
8192 points, 16KB
Line topology, star topology (Coexistence of line topology and star topology is possible.),
and ring topology
Token passing method
CC-Link IE Field network port x 2
Automatic return, Slave station disconnection, Loopback function
Ethernet cable of category 5e or higher (Double shielded cable) which satisfies 1000BASE-T standard
Counts as 2 modules
32 points (I/O assignment: Intelligent 32 points)
0.89A
0.27kg
Remote
station
■ LJ72GF15-T2
Intelligent
device station
Remote register
1024 words
Remote I/O
2048 points
Max. number of
connected modules
120
RAS function
CPU
RAS function
Transmission speed
1Gbps
L series Features
CC-Link IE Field Network Head Module
RAS function
System monitor Remote RESET Self-diagnosis
CC-Link IE Field
*END cover is included.
I/O
CC-Link IE Field network remote I/O station
L-series I/O and intelligent function modules can be
connected to the remote I/O head module without
a dedicated CPU. There are many benefits to using
intelligent device stations including reduced CPU
and wiring costs, great flexibility in selecting I/O and
intelligent function modules, and compact unit size.
Universal model QCPU
Analog /
Temperature Control
Modules compatible with the CC-Link IE Field network head module
Item
Product
Intelligent function module
Network module
Simple Motion
Input module
Output module
Analog input module
Analog output module
Temperature Control module
Simple Motion Module
Positioning Module
High-speed counter module
Serial communication module
CC-Link master/local module
CC-Link/LT master module
I/O module
Universal model QCPU
Error occurrence in
analog module
CPU module
error log area
< latch area >
Error occurrence in
a remote station
High-Speed
Counter
One feature of RAS is to store all remote station error
histories in the master station's latched memory. This
preserves the error information in one place in the
event of power loss and allows for easy troubleshooting.
Other RAS features include network event logging, unit
error logging, and testing and monitoring capabilities.
Positioning
RAS (Reliability, Availability, Serviceability) functions
Remote station
Head module
error log area
< latch area >
Notify
ch1 Alarm generation
Analog module
error log area
< non latch area >
Register
Error code
****
■ Specifications
Line network topology
LJ72GF15-T2
1Gbps
12000m (with 1 master and 120 slaves connected)
Maximum overall cable
distance
(Maximum transmission
distance)
Star network topology
Depends on the system configuration
12100m (with 1 master and 120 slaves connected)
Line, star, line and star mixed, or ring topology
Deterministic (token passing)
10
CC-Link IE Field network port x 2
Network event logging, unit error logging, testing, monitoring, and error history preservation function
Ethernet cable of category 5e or higher (Double shielded cable) which satisfies 1000BASE-T standard
1.00A
0.23kg
Network
Ring network topology
Transmission path
Communication method
Maximum number of modules specification*1
Communication port
RAS function
Connection cable*2
5VDC internal current consumption
Weight
Serial
Communication
Item
Transmission speed
*1: The total number of modules that can be mounted to a CC-Link IE Field network head module. (END cover and power supply module are not included.)
*2: Straight through cable
62
Network
CC-Link Master/Local Module
■ LJ61BT11
Master/
local station
Max. transmission
speed
10Mbps
Remote I/O
Remote register
2048 words*
8192 points*
Local station
CC-Link Ver.2.0
Standby master Transmission speed
station function auto-tracking function
*Link points for CC-Link Ver.2.0 master station
Connect with a huge selection of device types
using CC-Link
Local stations do not require transmission
speed settings
With such a large selection of CC-Link open network
compatible devices, constructing a control system is
easy.
Even applications requiring vast amounts of data
transmissions can be satisfied because CC-Link Ver.2.0
is supported.
[Transmission speed auto-tracking function]
When used as a local station, no transmission speed
setting is required; the setting is made through
automatic detection of the master station setting.
The current transmission speed in is indicated by an
LED on the front surface of the module.
Master station
Local stations automatically
track the transmission-speed
setting of the master station.
Local station
Local station
■ Specifications
Item
Transmission speed
Maximum overall cable distance
(Maximum transmission distance)
Maximum number of connected stations (master station)
Number of occupied stations (local station)
Remote I/O (RX, RY)
Maximum number of
Remote register (RWw)
link points per system*1
Remote register (RWr)
LJ61BT11
156kbps/625kbps/2.5Mbps/5Mbps/10Mbps
1200m (without repeater, varies according to the transmission speed)
64
1 to 4 stations (The number of stations can be switched using the GX Works2 parameter setting)
2048 points
256 points (master station ➝ remote device station/local station/intelligent device station/standby master station)
256 points (remote device station/local station/intelligent device station/standby master station ➝ master station)
Remote I/O (RX, RY)
Number of link points per
Remote register (RWw)
station*1
Remote register (RWr)
32 points (local station is 30 points)
4 points (master station ➝ remote device station/local station/intelligent device station/standby master station)
4 points (remote device station/local station/intelligent device station/standby master station ➝ master station)
Communication method
Synchronous method
Encoding method
Transmission path
Transmission format
Error control system
RAS function
Connection cable
Maximum number of modules specification
Number of occupied I/O points
5VDC internal current consumption
Weight
*1: Indicates the number of link points for Remote net Ver.1 mode.
63
Broadcast polling method
Frame synchronization method
NRZI method
Bus (RS-485)
Conforms to HDLC
CRC (X16+X12+X5+1)
Automatic return function
Slave station cut-off function
Error detection via link special relay/register
CC-Link dedicated cables compatible with Ver.1.10
Counts as 1 module
32 points (I/O assignment: Intelligent 32 points)
0.46A
0.15kg
■L
J61CL12
Master station
Max. transmission
speed
2.5Mbps
CC-Link/LT
No parameter
settings
L series Features
CC-Link/LT Master Module
Remote I/O
1024 points*
Remote station
Transmission speed
auto-tracking function
CPU
*In the 16-point mode
I/O
High speed equipment response
■ CC-Link/LT link scan time (using a transmission speed of 2.5Mbps)
2.5
16 point mode
2.0
8 point mode
4 point mode
1.5
1.0
0.5
0
0
20
40
60
Number of stations
Analog /
Temperature Control
Link scan time (ms)
CC-Link/LT has an excellent response time. With 64 stations
and a transmission speed of 2.5Mbps, the maximum link scan
time is just 1.2ms. According to the transmission distance
required, it is possible to select speeds of 2.5Mbps, 625kbps,
or 156kbps.
Simple Motion
Simple networking that 'just works'
There are no confusing parameters settings to make, and with remote I/O, only the master station needs to set the
transmission speed.
■ Specifications
Item
Point mode
Positioning
High-Speed
Counter
Serial
Communication
Network
Maximum link points
(the same I/O address used)
Link points per station
(the same I/O address used)
Points
32 stations 2.5Mbps
Control
connected 625kbps
specifications
156kbps
Link scan
time
Points
64 stations 2.5Mbps
connected 625kbps
156kbps
Transmission speed
Communication method
Network topology
Error control system
Communication
Number of connectable modules
specifications
Remote station number
Installation position of master station
RAS function
Connection cable*1
Maximum number of modules specification
Number of occupied I/O points*4
5VDC internal current consumption
Voltage
24VDC power supply*5
Current consumption
Current on startup
Weight
LJ61CL12
8-point mode
16-point mode
512 points
1024 points
(1024 points)
(2048 points)
8 points
16 points
(16 points)
(32 points)
256 points
512 points
0.8ms
1.0ms
2.7ms
3.8ms
10.0ms
14.1ms
512 points
1024 points
1.5ms
2.0ms
5.4ms
7.4ms
20.0ms
27.8ms
2.5Mbps/625kbps/156kbps
BITR method (Broadcastpolling + Interval Timed Response)
T-branch type
CRC
64
1 to 64
End of a trunk line
Network diagnostics, internal loopback diagnostics, slave station cutoff function, automatic return function
Dedicated flat cable (0.75mm2 × 4)*2, VCTFcable*3, flexible cable*2
Counts as 1 module
16, 32, 48, 64, 128, 256, 512, or 1024 points (I/O assignment: Intelli.)
0.16A
20.4 to 28.8VDC
0.03A
0.07A
0.12kg
4-point mode
256 points
(512 points)
4 points
(8 points)
128 points
0.7ms
2.2ms
8.0ms
256 points
1.2ms
4.3ms
15.6ms
*1: When the cables other than dedicated flat cables, VCTF cables, and flexible cables are used, performance of CCLink/LT is not guaranteed.
*2: Use the dedicated flat cables and flexible cables accredited by CC-Link Partner Association. CC-Link Partner Association website: http://www.cc-link.org/
*3: Refer to the manual for details regarding VCTF cable specifications.
*4: Set the number of occupied I/O points using the operation setting switch. Refer to the manual for details.
*5: 24VDC power supply is supplied through the dedicated power supply or power supply adapter.
64
Network
Ethernet and CC-Link IE Field related products
■ Wireless LAN Adapter
Ethernet
NZ2WL-US (U.S.A)* * , NZ2WL-EU (Europe)* 1*2, NZ2WL-CN (China)* 1*2, NZ2WL-KR (Korea)* 1*2, NZ2WL-TW (Taiwan)* 1*2
1 2
Features
• Wireless LAN (Ethernet) in the factory provides flexibility in installing new line or alteration
layouts.Wireless saves your wiring costs.
• Simply installing wireless LAN adapters makes existing FA equipment wireless.
• Compatible with the latest security standards of WPA2/WPA.
The security prevents unauthorized access from outside.
*1 Each product can be used only in the respective countries.
*2 Supported both Access point and Station. They can be used by changing the setting.
The wireless LAN adapters were developed and are produced with CONTEC Co., ltd.
Please note that the general specifications and guarantee conditions of these products are different from those of programmable
controllers (such as MELSEC series) and CONTEC products.
Refer to the manual for details on the product.
Wireless LAN needs no cables!
●●Easy to work without being bothered by cable routing.
Factory layouts can be easily changed, and costs for wiring can be substantially reduced.
AP
AP
AP
AP
AP
Helpful as radio signals reach the
confined place where cable
installation is troublesome!
Enables to communicate
production data with a
distant office!
AP
Office
ST
Need to streamline the shop
cables but re-layout seems
not very easy ...
Provides a free space for a
new line!
Easy to re-layout with wireless!
AP:Access point
ST:Station
Easily adapt existing FA devices to wireless connections!
●●PLCs, displays and personal computers can be easily added to an existing Ethernet network just by attaching wireless LAN
adapters.
[Note] E
thernet data communication through wireless LAN could be unstable compared to wired one due to packet loss
depending on peripheral conditions and place of installation.Be sure to confirm it works as intended.
Ethernet
HMI
Industrial
switching
hub
PLC
PC
“Wireless”
offers you:
Connect
wireless LAN
adapters to
respective
Ethernet ports!
ST
HMI
Industrial
switching
hub
AP
ST
PLC
ST
PC
AP:Access point
ST:Station
Trustworthy security
●●Compatible with the latest security standards of WPA2/WPA.
The security prevents unauthorized access such as bugging and falsification of data from outside.
65
CC-Link IE Field
L series Features
■ Industrial Switching HUB
Ethernet
NZ2EHG-T8 / NZ2EHF-T8*1
Features
• NZ2EHG-T8 is compatible with transmission rates of 10 Mbps, 100 Mbps, and 1 Gbps.
• NZ2EHF-T8 is compatible with transmission rates of 10 Mbps and 100 Mbps.
CPU
• These switching hubs comply with IEEE802.3ab (1000 BASE-T), IEEE802.3u(100 BASETX), IEEE802.3 (10 BASE-T) standards.
• AutoMDI/MDI-X and auto-negotiation are available.
• The automatic power adjustment function can reduce power consumption by up to 80
percent.*2
• These hubs do not use cooling fans, and yet a wide ambient-temperature operating range is
permissible (0 to 50°C).
• Quick detach mechanism allows easy DIN rail attachment and detachment.
[1Gbps]
[100Mbps]
I/O
*1 This model may not be connected directly to the CC-Link IE Field Network (1 Gbps). An Ethernet adapter module NZ2GF-ETB is
required. For direct use with the CC-Link IE Field Network, please use NZ2EHG-T8.
*2 For comparison, power consumption was measured when all 8 ports were used and when none of them were used. This function is
only available for NZ2EHG-T8.
This series was developed and is produced with Contec Co. Ltd. Please note that the specifications and guarantee conditions of
these products are different from those of MELSEC products.
Please refer to the product manual for details.
CC-Link IE Field
Analog /
Temperature Control
■ CC-Link IE Field Network Ethernet Adapter Module
Ethernet
NZ2GF-ETB
Features
• Using Seamless Message Protocol (SLMP*1), a variety of Ethernet devices such as vision
sensors and RFID controllers can be connected to the CC-Link IE Field network.
• Use a web browser to set station numbers, Ethernet options, and view error history.
Simple Motion
• This Ethernet adapter module is compatible with transmission rates of 100 Mbps and 1
Gbps.
*1 SLMP (SeamLess Message Protocol) is a protocol advocated by the CC-Link Partner Association.
Positioning
High-Speed
Counter
Serial
Communication
Network
66
External Dimension Diagrams
CPU Modules
4
4
L02CPU, L02CPU-P
90
90
45
END cover (accessory)
4
4
4
(45)
DIN rail center
13
70
95
4
4
L26CPU-BT, L26CPU-PBT
90
90
45
END cover (accessory)
13
98.5
118
Extension Module
L6EXB
L6EXE
END cover
(accessory)
DIN rail center
90
90
90
45
45
4
4
Branch Module
4
95
4
4
4
(45)
DIN rail center
(45)
(45)
DIN rail center
95
28.5
4
4
4
4
4
28.5
95
13
Extension Cable
60.1
LC06E, LC10E, LC30E
32.0
11.5
Unit: mm
67
Power Supply Modules
RS-232 adapter
L6ADP-R2
90
90
45
45
4
L61P, L63P
DIN rail center
(45)
(45)
DIN rail center
4
45
4
95
109
4
4
28.5
95
Display Unit
L6EC-ET
L6DSPU
(45)
DIN rail center
ERR.
24VDC
0.5A
95
112.5
L
4
+
−
4
50
90
45
4
END cover with error terminal
28.5
10
15
(2.3)
45
I/O Modules
LX28
NEW ,
LX40C6,
LY10R2, LY20S6
NEW ,
LY40NT5P, LY40PT5P
LX41C4, LY41NT1P, LY41PT1P
4
NEW ,
90
90
45
45
4
LX10
DIN rail center
95
4
4
4
117
28.5
4
(45)
(45)
DIN rail center
95
28.5
90
45
4
LX42C4, LY42NT1P, LY42PT1P
4
4
(45)
DIN rail center
95
28.5
Unit: mm
68
External Dimension Diagrams
Analog I/O Modules
90
45
4
L60AD4, L60DA4
4
95
4
(45)
DIN rail center
117
28.5
Temperature Control Modules
L60TCTT4BW, L60TCRT4BW
90
90
45
45
4
4
L60TCTT4, L60TCRT4
DINレール中心
95
4
4
4
117
28.5
95
4
(45)
(45)
DIN rail center
117
57.0
Simple Motion Module
90
45
4
LD77MH4, LD77MH16
4
95
98.5
4
(45)
DIN rail center
45
Unit: mm
69
Positioning Modules
LD75P2
LD75D1
NEW
NEW ,
LD75D2
NEW
(45)
DINレール中心
(45)
DINレール中心
90
45
90
45
4
NEW ,
4
LD75P1
4
4
4
4
45
95
90
45
90
45
4
LD75D4
4
LD75P4
45
95
(45)
DIN rail center
(45)
DIN rail center
4
4
4
4
45
95
45
95
High-Speed Counter Modules
90
45
4
LD62, LD62D
4
4
(45)
DIN rail center
28.5
95
Serial Communication Modules
LJ71C24-R2
90
90
45
45
4
4
LJ71C24
DIN rail center
(45)
(45)
DIN rail center
118
4
28.5
4
95
4
4
95
4
28.5
Unit: mm
70
External Dimension Diagrams
LJ71GF11-T2
LJ61BT11
90
45
90
45
4
CC-Link Master/Local Module
4
CC-Link IE Field Network Master/Local Module
DIN rail center
4
4
4
95
45
95
4
(45)
(45)
DIN rail center
118
28.5
CC-Link/LT Master Module
90
45
4
LJ61CL12
4
95
4
(45)
DIN rail center
28.5
CC-Link IE Field Network Head Module
4
4
LJ72GF15-T2
90
90
45
END cover (accessory)
4
4
4
(45)
DIN rail center
95
50
13
Unit: mm
71
MEMO
72
Reaching out to the world using a global network
Global FA center
"Mitsubishi Electric Global FA centers" have been established in various countries around the world to cover the Americas, Europe, and Asia.
FA centers help to ensure compliance with the certifications and regulations of different regions, initiate product development in response to local
demands, and provide full-time, professional customer service.
UK FA Center
European FA Center
Mitsubishi Electric Europe B.V. UK Branch
Travellers Lane, Hatfield, Hertfordshire, AL10
8XB, UK.
Tel: +44-1707-27-6100 / Fax: +44-1707-27-8695
Area covered: UK, Ireland
Mitsubishi Electric Europe B.V. Polish Branch
Krakowska 50, 32-083 Balice, Poland
Tel: +48-12-630-47-00 / Fax: +48-12-630-47-01
Area covered: Central and Eastern Europe
German FA Center
Mitsubishi Electric Europe B.V. German Branch
Gothaer Strasse 8, D-40880 Ratingen, Germany
Tel: +49-2102-486-0 / Fax: +49-2102-486-1120
Area covered: Mainly Western Europe
Nagoya,Japan
Czech republic FA Center
Mitsubishi Electric Europe B.V.-o.s.Czech office
Avenir Business Park, Radicka 714/113a, 158 00
Praha5, Czech Republic
Tel: +420-251-551-470 / Fax: +420-251-551-471
Area covered: Czech,Slovakia
India FA Center
Mitsubishi Electric India Pvt. Ltd.
India Factory Automation Centre
2nd Floor, Tower A & B, Cyber Greens, DLF
Cyber City, DLF Phase-III, Gurgaon-122002
Haryana, India
Tel: +91-124-463-0300 / Fax: +91-124-463-0399
Area covered: India
Beijing FA Center
China (including Hong Kong area)
Local factory in China
Mitsubishi Electric Automation (CHINA) Ltd.
Beijing Office
Unit 908, Office Tower 1, Henderson Centre, 18
Jianguomennei Avenue, Dongcheng District,
Beijing, China
Tel: +86-10-6518-8830 / Fax: +86-10-6518-3907
Area covered: China
Mitsubishi Electric Dalian
Industrial Products Co., Ltd.
Changchun
Tianjin FA Center
Shanghai FA Center
Mitsubishi Electric Automation (CHINA) Ltd.
Tianjin Office
Unit 2003, Tianjin City Tower, No.35, You Yi
Road, Hexi District, Tianjin, China
Tel: +86-22-2813-1015 / Fax: +86-22-2813-1017
Area covered: China
Tianjin
Qingdao
Xiangfan
Chengdu
Guangzhou FA Center
Mitsubishi Electric Automation (CHINA) Ltd.
Guangzhou Office
Rm.1609, North Tower, The Hub Center,
No.1068, Xin Gang East Road, Haizhu District,
Guangzhou, China
Tel: +86-20-8923-6730 / Fax: +86-20-8923-6715
Area covered: China
73
Shenyang
Dalian
Beijing
Chongqing
Shanghai
Wuhang
Fuzhou
Taipei
Guangzhou
Shenzhen
Taichung
Hong Kong
Mitsubishi Electric Automaiton (China) Ltd.
10F, Mitsubishi Electric Automation Center,
No.1386 Hongqiao Road, Changning District,
Shanghai, China
Tel: 86-21-2322-3030 / Fax: 86-21-2322-3000
Area covered: China
to provide comprehensive customer support.
FA center
FA center satellite
(China)
Mechatronics service center
(China)
Sales and Service office
Factory location
Development center
Russian FA Center
Korean FA Center
Mitsubishi Electric Europe B.V. Russian Branch
St.Petersburg office
Piskarevsky pr. 2, bld 2, lit "Sch", BC "Benua",
office 720; 195027, St. Petersburg, Russia
Tel: +7-812-633-3497 / Fax: +7-812-633-3499
Area covered: Russia
Mitsubishi Electric Automation Korea Co., Ltd.
3F, 1480-6, Gayang-Dong, Gangseo-Gu, Seoul,
157-200, Korea
Tel: +82-2-3660-9530 / Fax: +82-2-3664-8372
Area covered: Korea
Taiwan FA Center
L : Setsuyo Enterprise Co., Ltd.
6F., No.105, Wugong 3rd, Wugu Dist, New Taipei
City 24889, Taiwan, R.O.C.
Tel: +886-2-2299-2499 / Fax: +886-2-2299-2509
R : Mitsubishi Electric Taiwan Co.,Ltd.
No.8-1.Industrial 16th Road,Taichung Industrial
Park ,Taichung, Taiwan 407, R.O.C.
Tel: +886-(0)4-2359-0688 / Fax: +886-(0)4-2359-0689
Area covered: Taiwan
Thailand FA Center
North American FA Center
Mitsubishi Electric Automation (Thailand) Co., Ltd.
Bang-Chan Industrial Estate No.111 Soi Serithai
54, T.Kannayao, A.Kannayao, Bangkok 10230
Thailand
Tel: +66-2906-3238 / Fax: +66-2906-3239
Area covered: Thailand
Mitsubishi Electric Automation, Inc.
500 Corporate Woods Parkway, Vernon Hills, IL
60061, USA
Tel: +1-847-478-2100 / Fax: +1-847-478-2253
Area covered: North America, Mexico, Chile,
Brazil
ASEAN FA Center
Brazil FA Center
Mitsubishi Electric Asia Pte. Ltd.
ASEAN Factory Automation Centre
307 Alexandra Road #05-01/02,
Mitsubishi Electric Bulding, Singapore
Tel: +65-6470-2480 / Fax: +65-6476-7439
Area covered: Southeast Asia, India
MELCO-TEC Representacao Comercial e
Assessoria Tecnica Ltda.
Av. Paulista, 1439, cj74, Bela Vista, Sao Paulo
CEP: 01311-200-SP Brazil
Tel: +55-11-3146-2200 / Fax: +55-11-3146-2217
Area covered: Brazil
Complying with international quality assurance standards.
All of Mitsubishi Electric's FA component products have acquired the international quality assurance "ISO9001"
and environment management system standard "ISO14001" certification. Mitsubishi Electric's products also
comply with various safety standards, including UL standards.
*For jointly developed and partner products, guaranteed quality standards may differ. Please refer to the product manuals for details.
Safety Standards
CE :
Council Directive of the
European Communities
UL :
Underwriters Laboratories
Listing
74
Product List
*Refer to the product user manuals for information about compatible modules, restrictions, etc., before using the products.
*Contact your local Mitsubishi Electric sales office or representative for the latest information about MELSOFT software versions and compatible operating systems.
MELSEC-L series
[ Legend ]
Product
Model
L02CPU
L02CPU-P
CPU
L26CPU-BT
L26CPU-PBT
CPU packages
Branch / Extension module
Extension cable
Power supply
RS-232 adapter
END cover with error terminal
Display unit
CPU options
Battery
SD Memory Card
AC
Input
L02CPU-SET
L02CPU-P-SET
L26CPU-BT-SET
L26CPU-PBT-SET
L6EXB
L6EXE
LC06E
LC10E
LC30E
L61P
L63P
L6ADP-R2
L6EC-ET
L6DSPU
Q6BAT
Q7BAT-SET
Q7BAT
L1MEM-2GBSD*1
L1MEM-4GBSD*1
LX10 NEW
LX28 NEW
LX40C6
DC
(Positiv e or negative LX41C4
common)
LX42C4
Relay
LY10R2
Triac
LY20S6 NEW
I/O module
LY40NT5P
Output
Transistor
(Sink)
LY41NT1P
LY42NT1P
LY40PT5P
Transistor
(Source)
LY41PT1P
LY42PT1P
DB
: Double brand product (Note)
NEW
: Recently released product
*1: Mitsubishi Electric does not guarantee the operation of non-Mitsubishi Electric products.
Note: General specifications and product guarantee conditions of jointly developed products are different from those of MELSEC products.
For more information, please refer to the product manuals or contact your local Mitsubishi representative for details.
75
SOON
: Product available soon
Outline
Number of I/O points: 1024 points, Number of I/O device points: 8192 points, Program capacity: 20k steps,
Basic operation processing speed (LD instruction): 40ns, Program memory capacity: 80KB,
Peripheral connection ports: USB and Ethernet, Memory card I/F: SD Memory Card,
Built-in I/O functions (General input:16 points, General output (Sink type):8 points, Interrupt input,
Pulse catch, Positioning, High-speed counter), END cover included
Number of I/O points: 1024 points, Number of I/O device points: 8192 points, Program capacity: 20k steps,
Basic operation processing speed (LD instruction): 40ns, Program memory capacity: 80KB,
Peripheral connection ports: USB and Ethernet, Memory card I/F: SD Memory Card,
Built-in I/O functions (General input:16 points, General output (Source type):8 points, Interrupt input,
Pulse catch, Positioning, High-speed counter), END cover included
Number of I/O points: 4096 points, Number of I/O device points: 8192 points, Program capacity: 260k steps,
Basic operation processing speed (LD instruction): 9.5ns, Program memory capacity: 1040KB,
Peripheral connection ports: USB and Ethernet, Memory card I/F: SD Memory Card,
Built-in I/O functions (General input:16 points, General output (Sink type):8 points, Interrupt input,
Pulse catch, Positioning, High-speed counter), CC-Link master/local station function, END cover included
Number of I/O points: 4096 points, Number of I/O device points: 8192 points, Program capacity: 260k steps,
Basic operation processing speed (LD instruction): 9.5ns, Program memory capacity: 1040KB,
Peripheral connection ports: USB and Ethernet, Memory card I/F: SD Memory Card,
Built-in I/O functions (General input:16 points, General output (Source type):8 points, Interrupt input,
Pulse catch, Positioning, High-speed counter), CC-Link master/local station function, END cover included
CPU module (L02CPU), Display unit (L6DSPU), and Power supply module (L61P) set
CPU module (L02CPU-P), Display unit (L6DSPU), and Power supply module (L61P) set
CPU module (L26CPU-BT), Display unit (L6DSPU), and Power supply module (L61P) set
CPU module (L26CPU-PBT), Display unit (L6DSPU), and Power supply module (L61P) set
Branch module
Extension module with END cover
0.6-m cable for connecting branch and extension modules
1.0-m cable for connecting branch and extension modules
3.0-m cable for connecting branch and extension modules
Input voltage: 100 to 240VAC, Output voltage: 5VDC, Output current: 5A
Input voltage: 24VAC, Output voltage: 5VDC, Output current: 5A
For GOT connection, 1 x RS-232 channel, maximum transmission speed: 115.2Kpbs
END cover with error terminal
STN black-and-white LCD, 16 characters x 4 lines
Replacement battery
High capacity battery with a battery holder for CPU installation
High capacity replacement battery
2GB SD Memory Card
4GB SD Memory Card
16 points, 100 to 120VAC, Response time:20ms or less, 16 points/common, 18-point terminal block
8 points, 100 to 240VAC, Response time:20ms or less, 8 points/common, 18-point terminal block
16 points, 24VDC, Response time: 1/5/10/20/70ms or less,
16 points/common, Positive/Negative common, 18-point terminal block
32 points, 24VDC, Response time: 1/5/10/20/70ms or less,
32 points/common, Positive/Negative common, 40-pin connector
64 points, 24VDC, Response time: 1/5/10/20/70ms or less,
32 points/common, Positive/Negative common, 40-pin connector x 2
16 points, 24VDC/240VAC, 2A/point, 8A/common, Response time: 12ms or less,
16 points/common, 18-point terminal block
16 points, 100 to 240VAC, 0.6A/point, 4.8A/common, Response time:1ms + 0.5 cycles or less,
16 points/common, 18-point terminal block
16 points, 12 to 24VDC, 0.5A/point, 5A/common, Response time: 1ms or less, 16 points/common,
18-point terminal block, overload protection function, overheat protection function, surge suppression
32 points, 12 to 24VDC, 0.1A/point, 2A/common, Response time: 1ms or less, 32 points/common,
Sink type, 40-pin connector, overload protection function, overheat protection function, surge suppression
64 points, 12 to 24VDC, 0.1A/point, 2A/common, Response time: 1ms or less, 32 points/common,
Sink type, 40-pin connector x 2, overload protection function, overheat protection function, surge suppression
16 points, 12 to 24VDC, 0.5A/point, 5A/common, Response time: 1ms or less, 16 points/common,
18-point terminal block, overload protection function, overheat protection function, surge suppression
32 points, 12 to 24VDC, 0.1A/point, 2A/common, Response time: 1ms or less, 32 points/common,
40-pin connector, overload protection function, overheat protection function, surge suppression
64 points, 12 to 24VDC, 0.1A/point, 2A/common, Response time: 1ms or less, 32 points/common,
40-pin connector x 2, overload protection function, overheat protection function, surge suppression
MELSEC-L series
[ Legend ]
Product
Model
Analog input
L60AD4
Analog output
L60DA4
L60TCTT4
Thermocouple
L60TCTT4BW
Temperature
Control
L60TCRT4
RTD
L60TCRT4BW
LD77MH4
Intelligent
function
module
Simple motion
LD77MH16
LD75P1 NEW
Open collector
LD75P2 NEW
LD75P4
Positioning
LD75D1 NEW
Differential
driver
LD75D2 NEW
LD75D4
LD62
High-speed counter
LD62D
Serial communication
CC-Link IE Field network
Network
CC-Link
CC-Link/LT
LJ71C24
LJ71C24-R2
LJ71GF11-T2
LJ72GF15-T2*2
LJ61BT11
LJ61CL12
DB
: Double brand product
NEW
: Recently released product
SOON
: Product available soon
Outline
4 channels, Input: -10 to 10VDC, 0 to 20mADC, Output (resolution): 0 to 20000, -20000 to 20000,
Conversion speed: 20μs, 80μs, 1ms/ch, 18-point terminal block
4 channels, Input (resolution): 0 to 20000, -20000 to 20000, Output: -10 to 10VDC, 0 to 20mADC,
Conversion speed: 20μs/ch, 18-point terminal block
4 channels (normal mode) / 2 channels (heating-cooling control),
Thermocouple (K,J,T,B,S,E,R,N,U,L,PL2,W5Re/W26Re), No Heater disconnection detection function,
sampling cycle: 250ms/4CH, 500ms/4CH, Channel isolated, 18 point terminal block
4 channels (normal mode) / 2 channels (heating-cooling control),
Thermocouple (K,J,T,B,S,E,R,N,U,L,PL2,W5Re/W26Re), Heater disconnection detection function,
sampling cycle: 250ms/4CH,500ms/4CH, Channel isolated, 18 point terminal block x 2
4 channels (normal mode) / 2 channels (heating-cooling control),
Platinum type resistive temperature device(Pt100, JPt100), No Heater disconnection detection function,
Sampling cycle: 250ms/4CH,500ms/4CH, Channel isolated, 18 point terminal block
4 channels (normal mode) / 2 channels (heating-cooling control),
Platinum type resistive temperature device(Pt100, JPt100), Heater disconnection detection function,
Sampling cycle: 250ms/4CH,500ms/4CH, Channel isolated, 18 point terminal block x 2
4 axes, 2-/3-/4-axis linear interpolation, 2-axis circular interpolation, synchronous control,
Control unit: mm, inch, degree, pulse, Number of positioning data: 600 data/axis, SSCNET 3 connectivity
16 axes, 2-/3-/4-axis linear interpolation, 2-axis circular interpolation, synchronous control,
Control unit: mm, inch, degree, pulse, Number of positioning data: 600 data/axis, SSCNET 3 connectivity
1 axis, Control unit: mm, inch, degree, pulse,
Number of positioning data: 600 data/axis, Maximum output pulse: 200kpps, 40-pin connector
2 axes, 2-axis linear interpolation, 2-axis circular interpolation, Control unit: mm, inch, degree, pulse,
Number of positioning data: 600 data/axis, Maximum output pulse: 200kpps, 40-pin connector
4 axes, 2-/3-/4-axis linear interpolation, 2-axis circular interpolation, Control unit: mm, inch, degree, pulse,
Number of positioning data: 600 data/axis, Maximum output pulse: 200kpps, 40-pin connector x 2
1 axis, Control unit: mm, inch, degree, pulse,
Number of positioning data: 600 data/axis, Maximum output pulse: 4Mpps, 40-pin connector
2 axes, 2-axis linear interpolation, 2-axis circular interpolation, Control unit: mm, inch, degree, pulse,
Number of positioning data: 600 data/axis, Maximum output pulse: 4Mpps, 40-pin connector
4 axes, 2-/3-/4-axis linear interpolation, 2-axis circular interpolation, Control unit: mm, inch, degree, pulse,
Number of positioning data: 600 data/axis, Maximum output pulse: 4Mpps, 40-pin connector x 2
2 channels, 200/100/10kpps, Count input signal: 5/12/24VDC, External input: 5/12/24VDC,
Coincidence output: transistor (sink), 12/24VDC, 0.5A/point, 2A/common, 40-pin connector
2 channels, 500/200/100/10kpps, Count input signal: EIA standards RS-422-A (Differential line driver level),
External input: 5/12/24VDC, Coincidence output: transistor (sink), 12/24VDC, 0.5A/point, 2A/common,
40-pin connector
RS-232: 1 channel, RS-422/485: 1 channel, Total transmission speed of 2 channels: 230.4kbps
RS-232: 2 channels, Total transmission speed of 2 channels: 230.4kbps
Master/Local station
Remote station (Head module with END cover)
Master/Local station, CC-Link Ver.2.0 compatible
Master station, CC-Link/LT compatible
*2: Systems using the LJ72GF15-T2 head module cannot also use a CPU module, Branch module, Extension module, Display unit, RS-232 adapter, or CC-Link IE Field Network master/local module.
Options
Product
Connector
Connector/terminal block converter module
Model
A6CON1*1 *2
A6CON2*1 *2
A6CON3*1 *3
A6CON4*1 *2
A6TBXY36*4 *5
A6TBXY54*4 *5
A6TBX70*4
Outline
Soldering type 32-point connector (40-pin connector)
Crimp contact type 32-point connector (40-pin connector)
Flat cable pressure welding type 32-point connector (40-pin connector)
Soldering type 32-point connector (40-pin connector, cable connectable in bidirection)
For positive common type input module and sink type output module (Standard type)
For positive common type input module and sink type output module (2-wire type)
For positive common type input module (3-wire type)
*1: Available for L02CPU, L02CPU-P, L26CPU-BT, L26CPU-PBT, LX41C4, LX42C4, LY41NT1P, LY42NT1P, LY41PT1P and LY42PT1P.
*2: Available for LD75P1, LD75P2, LD75P4, LD75D1, LD75D2, LD75D4, LD62 and LD62D.
*3: When used with L02CPU, L02CPU-P, L26CPU-BT, L26CPU-PBT, only when all points are general I/O.
*4: Available for LX41C4 and LX42C4. (Positive common only)
*5: Available for LY41NT1P, LY42NT1P, LY41PT1P and LY42PT1P.
Ethernet related products
Product
U.S.A.
Europe
Wireless LAN
China
Adapter
Korea
Taiwan
Industrial switching HUB
CC-Link IE Field Network Ethernet Adapter
Model
NZ2WL-US*1*2 DB
NZ2WL-EU*1*2 DB
NZ2WL-CN*1*2 DB
NZ2WL-KR*1*2 DB
NZ2WL-TW*1*2 DB
NZ2EHG-T8 DB
NZ2EHF-T8 DB
NZ2GF-ETB
Outline
Conforms to IEEE 802.11a, IEEE 802.11b, IEEE 802.11g standards
Conforms to IEEE 802.11a, IEEE 802.11b, IEEE 802.11g standards
Conforms to IEEE 802.11a, IEEE 802.11b, IEEE 802.11g standards
Conforms to IEEE 802.11a, IEEE 802.11b, IEEE 802.11g standards
Conforms to IEEE 802.11a, IEEE 802.11b, IEEE 802.11g standards
10Mbps/100Mbps/1Gbps AUTO-MDIX, DIN rail mountable, 8 ports
10Mbps/100Mbps AUTO-MDIX, DIN rail mountable, 8 ports
100Mbps/1Gbps compatible station for expanding CC-Link IE Field networks
*1: Each product is usable only in the respective country.
*2: Both access points and stations are supported, and can be switched with the settings.
76
MELSOFT*1 — Programming Tool
Product
GX Works2
GX Developer*2
Model
Outline
SW1DNC-GXW2-E
Programmable controller engineering software
(Functions integrated software: Programming, simulation, module settings, and monitoring)
SW8D5C-GPPW-E
Programmable controller programming software
SW8D5C-GPPW-EV
Programmable controller programming software (upgrade)
FA engineering software*3
• System Management Software: MELSOFT Navigator
MELSOFT Navigator is a comprehensive system configuration solution that serves as a launching pad
for the other software packages.
SW1DNC-IQWK-E
(CD-ROM edition)
• Controller Programming Software: MELSOFT GX Works2
The next generation configuration, programming, and simulation software for FX, L, and Q Series
controllers.
SW1DND-IQWK-E
(DVD-ROM edition)
• Motion Programming Software: MELSOFT MT Works2
Design and maintenance tool for motion controllers.
MELSOFT iQ Works
• HMI Programming Software: MELSOFT GT Works3
GOT configuration, screen design, and maintenance tool.
• Robot Programing Software: MELSOFT RT ToolBox2 mini
Programming and total engineering tool for robots
MX Component
SW3D5C-ACT-E
ActiveX® library for communication
MX Sheet *4
SW1D5C-SHEET-E
Excel® communication support tool
*1: For details on the software versions compatible with each module, refer to the manual for each product.
Please contact your local Mitsubishi Electric sales office or representative for the latest information about MELSOFT software versions and compatible operating systems.
*2: Some functions have restrictions. For details, refer to “Precautions on L Series Modules” in the appendix of the GX Developer Version 8 Operating Manual.
*3: For detailed information about supported modules, refer to the manuals of the relevant software package.
*4: To use MX Sheet, MX Component is required.
77
Microsoft, Windows, Windows Vista are registered trademarks of Microsoft Corporation in the United States and other countries.
Ethernet is a trademark of Xerox Corporation.
SDHC logo is a trademark.
All other company names and product names used in this document are trademarks or registered trademarks of their respective companies.
Mitsubishi Electric
Programmable Controllers
Precautions before use
This publication explains the typical features and functions of the products herein and
does not provide restrictions and other information related to usage and module
combinations. Before using the products, always read the product user manuals.
Mitsubishi Electric will not be held liable for damage caused by factors found not to be
the cause of Mitsubishi Electric; opportunity loss or lost profits caused by faults in
Mitsubishi Electric products; damage, secondary damage, or accident compensation,
whether foreseeable or not, caused by special factors; damage to products other than
Mitsubishi Electric products; and to other duties.
To use the products given in this publication properly, always read the relevant manuals
before use.
The products have been manufactured as general-purpose parts for general industries,
and have not been designed or manufactured to be incorporated in a device or system
used in purposes related to human life.
Before using the products for special purposes such as nuclear power, electric power,
aerospace, medicine or passenger movement vehicles, consult with Mitsubishi.
The products have been manufactured under strict quality control. However, when
installing the products where major accidents or losses could occur if the products fail,
install appropriate backup or fail-safe functions in the system.
Country/Region Sales office
Tel/Fax
USA
Mitsubishi Electric Automation lnc.
500 Corporate Woods Parkway Vernon Hills, IL 60061, USA
Tel : +1-847-478-2100
Fax : +1-847-478-2253
Brazil
MELCO-TEC Rep. Com.e Assessoria Tecnica Ltda.
Av Paulista, 1439-Cj. 72 Cerqueira Cesar CEP 01311-200,
Sao Paulo, SP, CEP:01311-200, Brazil
Tel : +55-11-3146-2200
Fax : +55-11-3146-2217
Germany
Mitsubishi Electric Europe B.V. German Branch
Gothaer Strasse 8 D-40880 Ratingen, Germany
Tel : +49-2102-486-0
Fax : +49-2102-486-1120
UK
Mitsubishi Electric Europe B.V. UK Branch
Travellers Lane, Hatfield, Hertfordshire., AL10 8XB, UK
Tel : +44-1707-276100
Fax : +44-1707-278695
Italy
Mitsubishi Electric Europe B.V. Italian Branch
Viale Colleoni 7-20041 Agrate Brianza (Milano), Italy
Tel : +39-039-60531
Fax : +39-039-6053312
Spain
Mitsubishi Electric Europe B.V. Spanish Branch
Carretera de Rubi 76-80 E-08190 Sant Cugat del Valles (Barcelona), Spain
Tel : +34-93-565-3131
Fax : +34-93-589-2948
France
Mitsubishi Electric Europe B.V. French Branch
25,Boulevard des Bouvets, F-92741 Nanterre Cedex, France
Tel : +33-1-5568-5568
Fax : +33-1-5568-5757
Czech Republic Mitsubishi Electric Europe B.V.-o.s.-Czech office
Avenir Business Park, Radlická 714/113a CZ-158 00 Praha 5
Tel : +420-251-551-470
Fax : +420-251-551-471
Poland
Mitsubishi Electric Europe B.V. Polish Branch
ul. Krakowska 50 32-083 Balice, Poland
Tel : +48-12-630-47-00
Fax : +48-12-630-47-01
Russia
Mitsubishi Electric Europe B.V. Russian Branch St.Petersburg office
Tel : +7-812-633-3497
Sverdlovskaya emb., bld "Sch", BC "Benua", office 720; 195027, St.Petersburg, Russia Fax : +7-812-633-3499
South Africa
Circuit Breaker Industries Ltd.
Tel : +27-11-977-0770
9 Derrick Road, Spartan, Gauteng PO Box 100, Kempton Park 1620, South Africa Fax : +27-11-977-0761
China
Mitsubishi Electric Automaiton (China) Ltd.
No.1386 Hongqiao Road,Mitsubishi Electric Automation Center Shanghai China
Tel : +86-21-2322-3030
Fax : +86-21-2322-3000
Taiwan
Setsuyo Enterprise Co., Ltd.
6F., No.105, Wugong 3rd, Wugu Dist, New Taipei City 24889, Taiwan, R.O.C.
Tel : +886-2-2299-2499
Fax : +886-2-2299-2509
Korea
Mitsubishi Electric Automation Korea Co., Ltd.
1480-6, Gayang-dong, Gangseo-ku Seoul 157-200, Korea
Tel : +82-2-3660-9530
Fax : +82-2-3664-8372
Singapore
Mitsubishi Electric Asia Pte, Ltd.
307 Alexandra Road #05-01/02, Mitsubishi Electric Bulding Singapore 159943
Tel : +65-6470-2480
Fax : +65-6476-7439
Thailand
Mitsubishi Electric Automation (Thailand) Co., Ltd.
Bang-Chan Industrial Estate No.111 Soi Serithai 54,
T.Kannayao, A.Kannayao, Bangkok 10230 Thailand
Tel : +66-2-906-3238
Fax : +66-2-906-3239
Indonesia
P.T. Autoteknindo Sumber Makmur
Muara Karang Selatan Block A/Utara No.1 Kav.
No.11 Kawasan Industri/Pergudangan Jakarta-Utara 14440, P.O Box5045
Jakarta 11050, Indonesia
Tel : +62-21-663-0833
Fax : +62-21-663-0832
India
Mitsubishi Electric India Pvt. Ltd.
Tel : +91-124-4630300
2nd Floor, DLF Building No.9B, DLF Cyber City Phase III, Gurgaon 122002, Haryana, India Fax : +91-124-4630399
Australia
Mitsubishi Electric Australia Pty.Ltd.
348 Victoria Road, Rydalmere, N.S.W 2116, Australia
Tel : +61-2-9684-7777
Fax : +61-2-9684-7245
HEAD OFFICE: TOKYO BUILDING, 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS: 1-14, YADA-MINAMI 5, HIGASHI-KU, NAGOYA, JAPAN
L(NA)08159E-F 1205(MDOC)
New publication, effective May 2012.
Specifications are subject to change without notice.