Carrier TP-NRH-B Owner`s manual

Performance™ Programmable Owner’s Manual
You will love this thermostat.
You have the Edge™ thermostat. This unique device’s
state-of-the-art technology makes it easier than ever
for you to keep your home comfortable. And with an
ultra-thin profile and a selection of attractive faceplates,
it is easily the most decorator-friendly thermostat
available. Designed to be as smart – and smart-looking
– as any of the other electronics in your home, your new
Edge thermostat offers programming options to fit your
lifestyle – not anybody else’s. Let this manual show
you how easy it is to enjoy the newest experience in
home comfort.
1
Table of Contents
Button Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
On-screen Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Quick Start
Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Setting the temperatures for heating and cooling . . . . . . . . . . . . .12
Holding the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Using the EXP – Edge™ Expansion Port – to program the thermostat . .15
Programming the Thermostat
Determining your programming schedule . . . . . . . . . . . . . . . . . . . . .16
Setting up your schedule when all days of the week will follow
the same schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Setting up your schedule when all days of the week won’t follow
the same schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Using the programmable fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Programming a vacation schedule . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Activating your vacation program . . . . . . . . . . . . . . . . . . . . . . . .28
Operating the Thermostat
Using the thermostat to turn the heating and cooling system off . .30
2
Table of Contents
Using the fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Changing the humidity level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Using normal humidify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Using auto humidify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
How to turn off the humidify or dehumidify feature . . . . . . . .34
Using emergency heat (heat pump systems only) . . . . . . . . . . . . .35
Advanced Programming Options
Advanced programming display codes chart . . . . . . . . . . . . . . . . .36
Clearing the reset reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Changing from Fahrenheit to Celsius . . . . . . . . . . . . . . . . . . . . . . . . .39
Adjusting or turning off the continuous backlighting . . . . . . . . . . .40
Keypad lockout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Unlocking the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Changing from programmable to nonprogrammable . . . . . . . . .44
Changing the number of programming periods . . . . . . . . . . . . . . .46
Turning on the programmable fan feature . . . . . . . . . . . . . . . . . . . .47
Turning off the daylight savings time feature . . . . . . . . . . . . . . . . . .48
3
Table of Contents
Special Features
Hybrid Heat (heat pump systems only) . . . . . . . . . . . . . . . . . . . . . . .49
Service reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Outdoor temperature display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Auto changeover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Smart Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
What If . . .
“Auxiliary heat on” is displayed (heat pump systems only) . . . . . .51
“Em heat” is displayed (heat pump systems only) . . . . . . . . . . . . .51
There is a power outage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
You get a service reminder message . . . . . . . . . . . . . . . . . . . . . . . . .52
You get a system error message . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Common Terms and Where to Find Them
Auto changeover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Auxiliary heat (heat pump systems only) . . . . . . . . . . . . . . . . . . . . . .53
Backlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Daylight savings time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Dehumidify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
4
Table of Contents
Emergency heat (heat pump systems only) . . . . . . . . . . . . . . . . . . .54
EXP – Edge™ Expansion Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Hybrid Heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Humidify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Programmable fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Service reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Smart Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Temporary hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Time period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
5
Button Identification
c
b
d
a
e
f
g
m
l
k
j
6
i
h
Button Identification
a
SET
Enters the programming schedule, adjusts the clock, changes calendar, etc.
b
SCHEDULE
Choose follow schedule, hold, or vacation
c
FAN
Selects whether the fan operates continuously (on) or only when needed for
heating or cooling (auto)
d
MODE
Selects whether thermostat is set for heating, cooling, emergency heat, or
auto (heat and cool as needed), or off
e
DONE
Saves settings when completing a set-up or programming step
f
UP
Adjusts the currently chosen value (temperature, clock, calendar, etc.)
g
DOWN
Adjusts the currently chosen value (temperature, clock, calendar, etc.)
h
“SOFT” BUTTON
Selects the on-screen indicator directly above the button for adjustment
i
“SOFT” BUTTON
Selects the on-screen indicator directly above the button for adjustment
j
“SOFT” BUTTON
Selects the on-screen indicator directly above the button for adjustment
k
“SOFT” BUTTON
Selects the on-screen indicator directly above the button for adjustment
l
“SOFT” BUTTON
Selects the on-screen indicator directly above the button for adjustment
m
“SOFT” BUTTON
Selects the on-screen indicator directly above the button for adjustment
7
On-Screen Indicators
7
8
6
9
5
10
4
11
3
12
2
13
1
14
15
16
17
26 25
24 23 22 21 20 19 18
8
On-Screen Indicators
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
Day of the week
Battery strength
Programming option; indicates which settings are being adjusted
Filter, UV lamp, humidifier pad reminders
Current temperature
Current program routine – follow scheduled programming, hold current settings,
run vacation program
Fan mode – on or auto
Current system mode – heating, cooling, emergency heat, heat/cool (auto), off
Indicates humidify or dehumidify settings
F/C – Fahrenheit or Celsius
Advanced programming indicators
Keypad is locked (no padlock means unlocked)
Programming option; indicates which settings are being adjusted
System is in auxiliary (supplemental) mode
Selected cooling set point; cooling on
Selected heating set point; heating on (the 2 indicates second stage of heating
or cooling is active)
Heating setpoint
Year part of the date
Vacation schedule return date
Day part of the date
Length of time for temporary temperature hold
Month part of the date
Outdoor temperature; also displays other information during programming
Indicates whether setting humidify or dehumidify preferences
Time period start
Period of the day
9
Quick Start
Setting the time and date
You must set the time and date before you can use any
of the thermostat’s programming features.
1. Open the door.
2. Press the set button on the left. The screen will show
the word clock on the left and the time on the bottom.
3. To set the hour, press the button underneath the hour,
then press the up or down button on the right. Stop at
the desired hour.
4. To set the minutes, press the button underneath the
minutes, then press the up or down button on the right.
Stop at the desired number.
5. To set the date, press the set button until the screen
displays the word calendar and the date on the bottom
of the screen.
10
Quick Start
6. To set the month, press the button underneath the
letter M (month), then press the up or down button
on the right. Stop at the desired month.
7. To set the day of the month, press the button
underneath the letter D (day), then press the up or
down button on the right. Stop at the desired date.
8. To set the year, press the button underneath the letter
Y (year), then press the up or down button on the right.
Stop at the desired year.
9. Close the door.
11
Quick Start
Setting or changing the temperatures for heating and cooling
Your thermostat is installed with pre-set heating and cooling temperature
settings. You can use these or change them so your home is as warm or
as cool as you would like it to be. You can also temporarily change the
temperature after you’ve programmed your thermostat according to your
specific schedule needs.
These steps will temporarily hold the temperature where you set it for
two hours until the next programmed cycle begins.
1. Open the door. You will see an arrow next to the word heat or cool
on the screen, depending on the mode your system is in. (If it’s
the first time you’ve used the thermostat, it will say heat.) The
pre-programmed heating or cooling temperature is displayed
in a box at the bottom of the screen.
2. To change the displayed temperature, press the up or
down button located on the right side of the display
until you reach the desired setting.
3. To change the other temperature, press the mode
button above the screen. The arrow will move to the
word cool or heat and the screen will show that
temperature in a box.
12
Quick Start
4. Press the up or down button, located to the right of the
display, to change the displayed setting. Stop on the
desired setting.
5. When there are arrow indicators next to both the words
heat and cool at the top right of the screen, the heating
and cooling temperatures are also displayed at the
bottom of the screen. You can change either one by
pressing the button underneath the temperature you
want to change, then pressing the up or down button
on the right. Repeat the process for the other temperature
if necessary and press the done button when you are finished.
6. The thermostat will hold these changes for two hours or until
the next programmed cycle begins, as indicated by the words
temporary hold for 2:00 next to the set temperatures. To change
the amount of time the temperature is on hold, press the button
under the hold hours or minutes. Then press the up or down
button on the right. Stop at the desired amount of hold time.
7. Close the door.
13
Quick Start
Holding the temperature
Here’s how to override your programmed temperature settings and hold
the temperature at a specific setting without the temperature changing
during the next programmed period.
1. Open the door.
2. Press the schedule button at the top. The arrow will
move to the word hold under the button.
3. The screen displays the set temperature in the lower
right. To change that temperature, press the up or
down button on the right. The temperature will stay at
the setting you selected until you release the hold.
4. To change the heating temperature when the cooling
temperature is displayed – and vice versa – press the mode
button at the top of the screen until the arrow moves to your
choice – heat or cool. Then press the up or down button
on the right to reach your desired temperature setting.
5. To return the temperature to the pre-set level for that time period,
press the mode button until the arrow moves to follow schedule.
6. Close the door.
14
Quick Start
Using the EXP – Edge™ Expansion Port – to program the thermostat
Your Edge™ thermostat includes a unique EXP – Edge
Expansion Port – that allows you to use a digital memory
card to program the thermostat on your computer.
Remove the dual port digital memory card and insert it in
your computer’s digital or USB memory card reader. Follow
the onscreen instructions to program temperatures, the corresponding
time, and the day of the week. You can even schedule your thermostat to
remind you to change your furnace filter, the UV light or humidifier pad.
When you’ve completed the process on your computer, simply reinsert
the card back into the EXP port on the thermostat. It will automatically
transfer the settings on the card to the thermostat.
15
Programming the Thermostat
Determining your programming schedule
Unlike many thermostats, this one gives you the option of programming every day of the week differently. It is pre-programmed at the
factory with the same settings for all seven days:
Monday
through Sunday
Time
Heat
Cool
Wake
6 AM
68
76
Day
8 AM
60
85
Evening
5 PM
68
76
Sleep
10 PM
60
82
16
Programming the Thermostat
You can change those settings easily. Each day in your schedule must
have four time periods. The thermostat thinks of these time blocks in
terms of when people wake up, when they leave for the day, when
they return home, and when they go to sleep. Use this blank grid to
determine those time periods based on your own schedule along with
how warm or cool you want your home to be at those times.
Day of the
week and
program period
Start time
Heat setting
Monday Wake
Monday Day
Monday Evening
Monday Sleep
17
Cool setting
Programming the Thermostat
Tuesday Wake
Tuesday Day
Tuesday Evening
Tuesday Sleep
Wednesday
Wake
Wednesday
Day
Wednesday
Evening
Wednesday
Sleep
18
Programming the Thermostat
Thursday
Wake
Thursday
Day
Thursday
Evening
Thursday
Sleep
Friday Wake
Friday Day
Friday Evening
Friday Sleep
19
Programming the Thermostat
Saturday
Wake
Saturday
Day
Saturday
Evening
Saturday
Sleep
Sunday
Wake
Sunday
Day
Sunday
Evening
Sunday
Sleep
20
Programming the Thermostat
Setting up your schedule when all days of the week will follow the
same schedule
Here’s how to program your thermostat when all seven days of the
week will follow the same schedule.
1. Open the door.
2. Press the set button on the left repeatedly until the
screen shows daily schedule in the center and the list of
the days of the week on the left. The arrows next to
each day indicate that you can program all seven days
the same way now.
3. Notice the arrow pointing to wake on the screen. To set
the wake time, press the up or down button on the right
and stop at the desired wake time.
4. Next, set the heating temperature for that time period
by pressing the button under the heat set at: temperature on the right and then pressing the up or down button until you reach the desired heating temperature.
5. Set the cooling temperature for that time period by
pressing the button under the cool set at: temperature
on the right and then pressing the up or down button
until you reach the desired cooling temperature.
21
Programming the Thermostat
6. Repeat this process for each of the three remaining
time periods for Monday – day, evening and sleep –
by first pressing the button under the four time
periods to select the time period with the arrow. To
change the start at time, press the button under the
time, then press the up or down button, stopping on the
desired time. To set the heating temperature, press the
button under heat set at:, then press the up and down
button, stopping on the desired temperature. To set the
cooling temperature, press the button under cool set at:,
then press the up or down button, stopping on the
desired temperature.
7. Press the done button on the right when you’ve
completed the process.
8. Close the door.
22
Programming the Thermostat
Setting up your schedule when all days of the week won’t follow the
same schedule
Here’s how to program your thermostat when one or more days will
follow a different schedule from the rest.
1. Open the door.
2. Press the set button on the left repeatedly until the
screen shows daily schedule in the center and the list of
the days of the week on the left. There will be an arrow
next to every day of the week.
3. Press the button under the days of the week until the
arrow is next to the day you want to program.
4. There is an arrow pointing to wake on the screen. To set
the wake time, press the up or down button on the
right and stop at the desired wake time.
5. Next, set the temperature for that time period by
pressing the button under the heat set at: temperature
on the right and then pressing the up or down button
until you reach the desired heat temperature.
23
Programming the Thermostat
6. Set the cooling temperature for that time period by
pressing the button under the cool set at: temperature
on the right and then pressing the up or down button
until you reach the desired cooling temperature.
7. Repeat this process for each of the three remaining
time periods – day, evening and sleep – by first pressing
the button under the four time periods to select the
time period with the arrow. To change the start at time,
press the button under the time, then press the up or
down button, stopping on the desired time. To set the heating
temperature, press the button under heat set at:, then press the
up and down button, stopping on the desired temperature. To set
the cooling temperature, press the button under cool set at:, then
press the up or down button, stopping on the desired temperature.
8. To set the schedule for another day, press the button
under the days of the week on the left again until the
arrow is next to the day you want to program.
9. Repeat steps 4 through 7 to program that day.
10. Continue to repeat step 8, then steps 4 through 7 to program
remaining days.
24
Programming the Thermostat
11. Press the done button on the right when you’ve
completed the process.
12. Close the door.
25
Programming the Thermostat
Using the programmable fan
When you use the instructions on page 47 in the Advanced
Programming Options section to turn on the programmable fan
feature, you can program the fan selection to “auto” or “on” for each
of the program schedule periods. When scheduling and setting your
program periods, simply press the fan button at the top to select auto
or on for that period. You can make this change in as many days and
time periods as desired.
26
Programming the Thermostat
Programming a vacation schedule
You can program a special heating and cooling schedule to follow
when you will be gone for a vacation or an extended period of time.
1. Open the door.
2. Press the set button on the left side repeatedly until
the screen shows vacation settings on the right side,
your vacation heating and cooling temperatures in the
lower right, and humidify* on the bottom.
3. The selection box is around the heating temperature.
Press the up or down button to select your desired
heating temperature.
4. To adjust your cooling temperature, press the button
under the cool set at temperature on the screen. The
selection box will move to that number.
5. Press the up or down button to select your desired
cooling temperature.
6. To change the humidity setting, press the button
under humidify. The current setting will appear in the
center of the screen.
* Only homeowners with the TP-PRH model of thermostat will see a "humidify" icon.
27
Programming the Thermostat
7. Press the up or down button on the side and stop at the desired
setting.
8. To change the fan from auto to on, press the fan
button at the top.
9. To change the thermostat mode to heat, cool, Em heat
or heat/cool (auto), press the mode button at the top
until the arrow is next to the option you want.
10. Press the done button.
11. Close the door.
Activating your vacation program
You must schedule a return date to activate your vacation
settings before leaving. The thermostat will begin following the vacation
schedule after you’ve selected the return date. On 12:00 AM on the
return date, the thermostat will automatically switch to the follow
schedule option and run your programmed schedule.
28
Programming the Thermostat
1. Press the schedule button at the top until the arrow
is next to vacation.
2. You will see the next day’s date at the bottom of
the screen under the words return on. There is a
box around the date. To set the date (D) you will
return home, press the up button and stop on the
desired date.
3. If you need to change the month (M) for your return,
press the button under the month on the screen. The
selection box will move to the month number.
4. Press the up button to set the desired month.
5. Repeat this process to change the year (Y)
if necessary.
6. Press the done button. This will instruct the thermostat
to begin adjusting to these settings immediately.
7. Close the door.
29
Operating the Thermostat
Using the thermostat to turn the heating and cooling system off
Here’s how to use the thermostat to turn the heating and cooling
system off.
1. Open the door.
2. Press the mode button on the top left repeatedly until
the display shows off shows in the upper left.
3. Close the door.
30
Operating the Thermostat
Using the fan
When the fan is on, it helps distribute air throughout your home for a
more even temperature in all spaces. You can set the thermostat so
that the fan runs only during your heating and cooling cycles (auto
mode) or to run continuously.
1. Open the door.
2. Press the fan button on the top. The arrow underneath
the button moves from auto to on.
3. When you want to return the fan to auto mode, press
the fan button again. You will see the arrow next to auto
under the button.
4. Close the door.
31
Operating the Thermostat
Changing the humidity level
Your thermostat offers three humidity* options: normal, auto and off.
It is set at the factory for “normal humidify,” which is a fixed setting
based on how much humidity you want in the home. This humidity
level remains constant, regardless of the outdoor temperature. You can
manually adjust the humidity level according to your own preferences.
The second option, “auto humidify,” uses an outdoor temperature
sensor (when installed) to automatically adjust the inside humidity
level according to the outside temperature when the thermostat is
set for auto humidify.
You can also turn off the humidify/dehumidify feature.
Using normal humidify
Here’s how to change the fixed (constant) humidity setting.
1. Open the door. You will see humidify at the bottom of the screen
if the operating mode is heat or dehumidify if the operating mode
is cool.
2. Press the button under humidify or dehumidify.
The screen will display the current setting.
* Only homeowners with the TP-PRH model of thermostat will see a "humidify" icon.
32
Operating the Thermostat
3. Press the up or down button to change the setting.
It is factory-set at 26% for humidify and 60% for
dehumidify. It there’s too much condensation on the
windows, try a lower number. If the air is too dry, try a
higher number. If your home is newer and has quality
windows that create a “tight” home, try a higher setting. If your
home is older, you might need a lower setting. You can set the
humidity between 10% and 46%; the dehumidify range is from
46% to 66%.
4. Close the door.
Using auto humidify
The auto humidify feature automatically adjusts the amount
of humidity according to the outside temperature. It can be
manually adjusted when there is too much condensation
accumulating on windows or the air seems too dry. Here’s
how to switch to auto humidify and make adjustments.
1. Open the door. Press the button under humidify. You
will see the current humidity settings.
2. Press the mode button. You will see auto at the top,
the current humidity reading, and 5 set at, which is
33
Operating the Thermostat
the factory setting for the auto humidify mode.
(Auto indicates you have put the thermostat in auto humidify mode.)
3. Press the up or down button to change this auto
humidify set at number. If there is too much condensation
on the windows, select a number lower than 5. If there
seems to be a lot of static electricity, which often
means the air is too dry, select a number higher than 5.
If your home is newer and has quality windows that create
a “tight” home, try a higher setting. If your home is older,
you might need a lower setting.
4. Close the door.
How to turn off the humidify or dehumidify feature
Here’s how to turn off the humidify and/or dehumidify
features.
1. Open the door. To turn off either feature, press the
button under the word humidify or dehumidify.
2. Press the mode button until the screen says OF.
3. Close the door.
34
Operating the Thermostat
Using emergency heat (heat pump systems only)
Emergency heat is useful when the automatic auxiliary heat system
can’t keep up with demand. (Systems with heat pumps use “auxiliary
heat” when it’s too cold outside for the heat pump to heat the house
without help. The display indicator for this is auxiliary heat on.)
If the heat pump compressor that works with auxiliary heat fails, or if
the heat pump isn’t working at all, you can turn on the emergency heat
for that extra help. (You’ll know there’s a problem if the house can’t
seem to get warm when it’s very cold outside.) You want to avoid using
emergency heat, though, because it’s the most expensive option. And,
of course, if you suspect a problem with your heat pump, call your
heating and cooling dealer immediately.
Here’s how to set your thermostat to use emergency heat.
1. Open the door.
2. Press the mode button repeatedly until the arrow under
the button moves to Em heat on the screen.
3. Close the door.
35
Advanced Programming Options
Advanced programming display codes chart
You can customize several features of your thermostat. This chart
shows which features you can change and the codes associated
with them. The codes will be shown on the display when you follow
the instructions.
Feature
Configuration Change
Code
Indication
reset reminders
01
0 to 100%
Fahrenheit to Celsius
02
F or C
backlighting
03
Of, 1, 2, 3, 4, 5
keypad lockout
04
Of, 1, 2, 3, padlock
programmable or
nonprogrammable
05
P or nP
number of program periods
06
4 or 2
programmable fan
07
Of or On
daylight savings time
08
Of or On
36
Advanced Programming Options
Clearing the reset reminders
The thermostat tells you when it’s time to change the UV light in the
evaporator coil box connected to the furnace (if equipped), humidifier
pad (if equipped), and furnace filter. (See page 49 for more information.)
When the reminder icons are displayed on the screen, pressing and
holding the done button for about three seconds clears all reminders
on the screen. This might not be the best option when you have
multiple reminders but have done only one of the tasks. This option
lets you reset the reminders individually.
1. Open the door.
2. Press the buttons underneath the heat and cool
temperatures simultaneously (the two bottom buttons
on the right). The screen will display 01 and up to three
reset reminders, as enabled by your installer. One of
the reminders will flash; the display will show the
percentage of time used by that reminder item.
3. Repeatedly press the set button until the reminder
you want to clear flashes.
37
Advanced Programming Options
4. Press and hold the done button for about three
seconds to remove the reminder. The percentage
associated with it will go down to zero.
5. Press the done button.
6. Close the door.
38
Advanced Programming Options
Changing from Fahrenheit to Celsius
Your thermostat is preset to display the temperature in
degrees Fahrenheit. You can change this to Celsius.
1. Open the door.
2. Press the buttons underneath the heat and cool
temperatures simultaneously (the two bottom buttons
on the right). The screen will display the reset reminders
and 01.
3. Press the button under the configuration number, 01.
The number will change to 02 with F (Fahrenheit) next to it.
4. Press the button under the F to change it to C (Celsius).
5. Press the done button.
6. Close the door.
39
Advanced Programming Options
Adjusting or turning off the continuous backlighting
Your thermostat may feature a low level amount of backlighting until
you press any button, which increases the lighting temporarily. You can
adjust the intensity of the backlighting or turn if off completely. Here’s
how.
1. Open the door.
2. Press the buttons underneath the heat and cool
temperatures simultaneously (the two bottom buttons
on the right). The screen will display the reset reminders
and 01.
3. Press the button under the configuration number, 01
(second button from the right), until the number changes
to 03 with 3 next to it.
4. To increase the amount of backlighting, press the up
button. To decrease the amount, press the down button.
The range is 1 to 5 with 1 being the lowest.
5. Press the down button until Of is displayed.
40
Advanced Programming Options
6. Press the done button.
7. Close the door.
41
Advanced Programming Options
Keypad lockout
The keypad lockout feature lets you “lock” the thermostat at one of
three levels that increasingly limit anyone’s ability to make changes by
pressing buttons. The levels are:
1 – You can change the temperature settings, the time of day, and the
day of the week only
2 – You can change the temperature settings only
3 – The entire keypad is locked, allowing no changes
Here’s how to lock the keypad on each of the three levels.
1. Open the door.
2. Press the buttons underneath the heat and cool
temperatures simultaneously (the two bottom
buttons on the right). The screen will display the
reset reminders and 01.
3. Press the button under the configuration number, 01,
until the number changes to 04 with Off next to it.
42
Advanced Programming Options
4. Press the bottom button under off until the screen
displays the level you want – 1, 2 or 3. You will also
see a padlock icon on the screen.
5. Press the done button.
6. Close the door.
Unlocking the Keypad
Here’s how to temporarily unlock the keypad after you have locked it.
1. Open the door.
2. Press and hold the up and down buttons on the right
simultaneously for about five seconds.
3. The padlock icon will disappear. This means the
keypad is unlocked and can be used. The keypad will
revert back to the locked state after you’ve stopped
pushing buttons for two minutes.
4. Close the door.
43
Advanced Programming Options
Changing from programmable to nonprogrammable
It is possible to convert your thermostat’s operation from programmable
to nonprogrammable. This eliminates its advanced features. When
switching to the nonprogrammable format, you lose the programming,
hold, vacation and Smart Recovery features. Switching to nonprogrammable also means you’ll give up some of the thermostat’s energy saving
features. The time of day and day of the week will still show on the display and you will be able to increase or decrease the temperature settings manually. Here’s how to switch to nonprogrammable.
1. Open the door.
2. Press the buttons underneath the heat and cool
temperatures simultaneously (the two bottom buttons
on the right). The screen will display the reset reminders
and 01.
3. Press the button under the configuration number, 01,
repeatedly until the number changes to 05 with P
(programmable) next to it.
44
Advanced Programming Options
4. Press the button under the P to change it to
nP (nonprogrammable).
5. Press the done button.
6. Close the door.
45
Advanced Programming Options
Changing the number of programming periods
Your thermostat is preset with four time periods. You can change this
to two. Here’s how to change the number of periods in the day.
1. Open the door.
2. Press the buttons underneath the heat and cool
temperatures simultaneously (the two bottom buttons
on the right). The screen will display the reset
reminders and 01.
3. Press the button under the configuration number, 01,
repeatedly until the number changes to 06 with 4 next
to it.
4. Press the button under the 4 to change it to 2.
5. Press the done button.
6. Close the door.
46
Advanced Programming Options
Turning on the programmable fan feature
When you turn on the programmable fan feature using these
instructions, you can program the fan selection to “auto” or “on”
for each of the program schedule periods. (Learn more
about this on page 26.)
1. Open the door.
2. Press the buttons underneath the heat and cool
temperatures simultaneously (the two bottom buttons
on the right). The screen will display the reset
reminders and 01.
3. Press the button under the configuration number, 01,
repeatedly until the number changes to 07 with Off next
to it.
4. Press the button under Off to change it to On.
5. Press the done button.
6. Close the door.
47
Advanced Programming Options
Turning off the daylight savings time feature
The thermostat will automatically change the clock according to
daylight savings time procedures twice a year. Here’s how to turn
off the daylight savings time feature so the clock doesn’t automatically
change.
1. Open the door.
2. Press the buttons underneath the heat and cool
temperatures simultaneously (the two bottom buttons
on the right). The screen will display the reset
reminders and 01.
3. Press the button under the configuration number, 01,
repeatedly until the number changes to 08 with On next
to it.
4. Press the button under On to change it to Off.
5. Press the done button.
6. Close the door.
48
Special Features
Hybrid Heat (heat pump with a furnace system only)
This thermostat works with the Carrier Hybrid Heat systems offering
maximum comfort and economy by automatically controlling whether
your system delivers heating with the heat pump, with the furnace, or
with both options working together.
Service reminders
The thermostat tells you when it’s time to change the UV light in the
evaporator coil box connected to the furnace (if equipped), humidifier
pad (if equipped), and furnace filter. Each reminder – check UV light,
check hum pad, check filter – will be displayed on the upper left of
the screen. (For important safety reasons, ask your dealer to replace
your UV light.)
To remove the reminder after you or your dealer have
replaced the indicated product, press and hold the done
button for about three seconds.
Outdoor temperature display
The thermostat automatically displays the outdoor temperature only
when the door is closed.
49
Special Features
Auto changeover
The thermostat displays one of five modes: heat, cool, Em heat (heat
pump version only), heat cool (auto mode) and off. When the mode
selection is for both heating and cooling – auto mode – the thermostat
is in auto changeover mode. This allows the system to switch from
heating to cooling – or from cooling to heating – to maintain the
temperatures you’ve programmed. It does this automatically.
Smart Recovery
The Smart Recovery feature transitions your home from one temperature
period (wake, day, evening, sleep) to the next so that the your home’s
temperature matches the temperature setting at the start of each time
period. This means, for example, that if your sleep period temperature
setting is lower than the period that precedes it, the thermostat will start
cooling down the home before the beginning of the scheduled sleep
period. It does this at an energy-efficient rate. This not only helps make
your home as comfortable as possible, it also makes your thermostat
more cost effective. Call your dealer to adjust Smart Recovery settings.
50
What If . . .
“Auxiliary heat on” is displayed (heat pump and Hybrid Heat
systems only)
Auxiliary heat on applies only to the heat pump version. If it is on, you
will see auxiliary heat on. When it is displayed, it means the system has
determined that it’s too cold outside for your heat pump to heat the
house without help, so it’s getting help from the electric heaters. This
happens automatically.
“Em heat” is displayed (heat pump and Hybrid Heat systems only)
Em heat is the display term for emergency heat and applies only to
the heat pump version. When emergency heat has been turned on,
Em heat is displayed. You have to turn on emergency heat manually –
it doesn’t happen automatically – so if you see Em heat on the display,
it means somebody has turned it on.
There is a power outage
If you lose electricity, you won’t have to reprogram the thermostat
because your settings are retained in its memory.
51
What If . . .
You get a service reminder message
Service reminder messages – check UV light, check hum pad, check
filter – tell you that it’s time to change the UVC lamp in the evaporator
coil box connected to the furnace (when installed), humidifier pad
(when installed), and furnace filter. Make the indicated changes with
the exception of the UV lamp – for important safety reasons, ask your
dealer to replace that.
You get a system error message
Here are the possible system error messages and what they mean:
E1
The system isn’t communicating properly. Call your heating and
cooling dealer for service.
--
The temperature sensor isn’t working. Call your heating and
cooling dealer for service.
E4 There’s an internal memory failure. Call your heating and cooling
dealer for service.
E5 The humidity sensor isn’t working. Call your heating and cooling
dealer for service.
52
Common Terms and Where to Find Them
Auto changeover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 50
This feature automatically switches your system from heating to
cooling – or from cooling to heating – whenever necessary when
in auto mode only (heat/cool).
Auxiliary heat (heat pump and Hybrid Heat systems only) . . .page 35
Most heat pump systems can’t heat a home sufficiently when it gets
very cold outside so they use a supplemental heating source called
auxiliary heat. The system knows when to use this help and does so
automatically. If it’s using auxiliary heat, the display will show auxiliary
heat on when you press the mode button. You have no control over
the auxiliary heat function.
Backlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 40
Backlighting illuminates your display. The backlight is on constantly at
a dim level that brightens when you push a button.
Daylight savings time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 48
The thermostat will automatically change the clock according to
daylight savings time procedures twice a year.
53
Common Terms and Where to Find Them
Dehumidify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 32
When your heating and cooling system is used to dehumidify the
air and the thermostat is set up to dehumidify, the thermostat will
instruct it to remove moisture from the air as necessary when the
air conditioning is on.
Emergency heat (heat pump and Hybrid Heat systems only) . .page 35
You can manually set the thermostat to use emergency heat but it is
the most expensive option. If it’s using emergency heat, the display
will show Em heat.
EXP (Edge™ Expansion Port) . . . . . . . . . . . . . . . . . . . . . . . . . .page 15
The unique EXP – Edge Expansion Port – allows you to use a digital
memory card to program the thermostat on your computer.
Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 14
This function holds the current set temperature.
Hybrid Heat (heat pump with a furnace system only) . . . . .page 49
This Carrier heating and cooling system concept offers maximum
comfort and economy. When a Hybrid Heat system is installed, the
54
Common Terms and Where to Find Them
thermostat automatically controls whether your system delivers
heating with the heat pump, with the furnace, or with both options
working together.
Humidify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 32
When your heating and cooling system includes a humidifier, the thermostat will instruct it to add moisture to the air as necessary when the
heat is on.
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 30
This term refers to the type of operation your system is performing.
The options are heat, cool, emergency heat, auto (heat/cool) and off.
Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 14
This happens when you temporarily disregard the thermostat’s
programmed temperature settings and schedules by using the
temporary hold or hold options.
Programmable fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 26
You can program the fan selection to “auto” or “on” for each of the
program schedule periods.
55
Common Terms and Where to Find Them
Service reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 49
The thermostat tells you when it’s time to change the UVC lamp (if
equipped), humidifier pad (if equipped) and furnace filter. (For safety
reasons, ask your dealer to replace your UV lamp.)
Smart Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 50
This feature allows your system to shift from one temperature period
to the next scheduled period at an energy-efficient rate.
Temporary hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 12
This function lets you temporarily maintain your temperature settings.
The system will return to the scheduled settings during the next
time period.
Time period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 17
The thermostat features four time periods – wake, day, evening and
sleep. These blocks of time are linked to temperatures you set
according to how warm or cool you want the house during those
time periods.
56
Notes Page
57
Thermostat Limited Warranty
FOR SERVICE OR REPAIR, FOLLOW THESE STEPS IN ORDER:
FIRST: Contact the installer. You may find their name on the furnace or in your Homeowner’s Packet. If the
installer’s name is not known, call your builder or home retailer if yours is a new residence.
SECOND: Contact the nearest distributor. (See yellow pages.)
THIRD: Contact:
Carrier Corporation
Consumer Relations
P.O. Box 4808
Syracuse, New York 13221
Phone: 1-800-428-4326
Model No.
Unit Serial No.
Date of Installation
Installed by
Name of Owner
Address of Installation
THERMOSTAT LIMITED WARRANTY
FIVE-YEAR LIMITED WARRANTY – Carrier Corporation (hereinafter referred to as “Company”) warrants
this product to be free from defects in material and workmanship. If a defect is found within five years
from date of original installation of product (whether or not actual use begins on that date) Company will
provide a new or remanufactured part, at Company’s sole option, to replace any defective part, without
charge for the part itself.
This warranty does not include labor or other costs incurred for diagnosing, repairing, removing, installing,
shipping, servicing or handling of either defective parts or replacement parts.
WARRANTY CONDITIONS:
1. Warranties apply only to products in their original installation location.
2. Installation, use, care, and maintenance must be normal and in accordance with instructions contained
58
Thermostat Limited Warranty
in the Owner’s Manual and Company’s service information.
3. Defective parts must be returned to the distributor through a registered servicing dealer for credit.
4. All work shall be performed during normal working hours.
LIMITATIONS OF WARRANTIES – ALL IMPLIED WARRANTIES (INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY LIMITED IN DURATION TO THE
PERIOD FOR WHICH THE LIMITED WARRANTY IS GIVEN AND APPLIES. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE MAY NOT APPLY TO YOU.
THE EXPRESSED WARRANTIES MADE IN THIS WARRANTY ARE EXCLUSIVE AND MAY NOT BE ALTERED,
ENLARGED, OR CHANGED BY ANY DISTRIBUTOR, DEALER, OR OTHER PERSON, WHATSOEVER.
COMPANY WILL NOT BE RESPONSIBLE FOR:
1. Normal maintenance as outlined in the installation and servicing instructions or Owner’s Manual,
including filter cleaning and/or replacement and lubrication.
2. Damage or repairs required as a consequence of faulty installation, misapplication, abuse, improper
servicing, unauthorized alteration or improper operation.
3. Failure to start due to voltage conditions, blown fuses, open circuit breakers, or damages due to the
inadequacy or interruption of electrical service.
4. Damage as a result of floods, winds, fires, lightning, accidents, corrosive environments or other
conditions beyond the control of Company.
5. Parts not supplied or designated by Company, or damages resulting from their use.
6. Company products installed outside the continental U.S.A., Alaska, Hawaii, and Canada.
7. Electricity or fuel costs, or increases in electricity or fuel costs from any reason whatsoever, including
additional or unusual use of supplemental electric heat.
8. ANY SPECIAL INDIRECT OR CONSEQUENTIAL PROPERTY OR COMMERCIAL DAMAGE OF ANY
NATURE WHATSOEVER. Some states do not allow the exclusion of incidental or consequential
damages, so the above limitation may not apply to you.
This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
59
Infinity™ Air Purifier Offers
Healthier Air for the Entire Home
The Infinity™ Air Purifier is Carrier’s premier air purification
solution. It’s ideal for homeowners with allergy concerns,
those susceptible to airborne germs – such as infants and
the elderly – and those sensitive to the effects of molds,
pollen, pets and more. And, it is an integral component to
Carrier Healthy Home Solutions.
• The Infinity Air Purifier’s patented technology is
so effective it even captures and kills airborne
pathogens such as bacteria, viruses and mold.
• Its exclusive technology is also trusted to
protect secure government facilities and
hospital room patients.
• The Infinity Air Purifier cleans over 100 times
more air than some of the popular portable
units – and can clean your entire home.
• It’s convenient -- no cleaning is required.
Simply remove and replace the media cartridge
periodically to maintain peak performance.
OM-TPPRH-1CA
Manufacturer reserves the right to discontinue, or change at any time,
specifications or designs without notice or without incurring obligations.
© Carrier Corporation 2007