GOT1000 - GT10 and Alpha2 Quick start guide

HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI
GT10 HMIs connected to
Alpha2 controller
Quick Start Guide
Mitsubishi Electric – GOT1000 – GT10 and Alpha2 connection, December 2007
HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI
Notes
• In the following Quick Start
guide, we will configure a
system using the GT10xx-LBD2
(RS232,24VDC) connected
directly to Alpha2 GSM Port.
Mitsubishi Electric – GOT1000 – GT10 and Alpha2 connection, December 2007
1
HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI
STEP 1 - HMI
• Select the Terminal
(must have 232 interface),
product names and SAP no.:
–
–
–
–
GT1030-LBD2
GT1030-LBDW2
GT1020-LBD2
GT1020-LBDW2
206970
206972
200492
208669
• Locate GT10 Mounting
Packaging
– (1) Rubber Gasket
– (4) Mounting Clips
– (1) Communication
Terminal IF
Mitsubishi Electric – GOT1000 – GT10 and Alpha2 connection, December 2007
HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI
STEP 2 – Alpha2 controller
• Select the Alpha2 controller
Product names and SAP no.:
AL2-10MR-A
163515
Alpha XL Base Unit AC 100-240 V;
6 inputs AC 100-240 V; 4 relay
outputs
AL2-10MR-D
163516
Alpha XL Base Unit DC 24 V; 6
inputs DC 24 V; 4 relay outputs
AL2-14MR-A
164867
Alpha XL Base Unit AC 100-240 V;
8 inputs AC 100-240 V; 6 relay
outputs
AL2-14MR-D
164868
Alpha XL Base Unit DC 24 V; 8
inputs DC 24 V; 6 relay outputs
AL2-24MR-A
164869
Alpha XL Base Unit AC 100-240 V;
15 inputs AC 100-240 V; 9 relay
outputs
AL2-24MR-D
164870
Alpha XL Base Unit DC 24 V; 15
inputs DC 24 V; 9 relay outputs
Mitsubishi Electric – GOT1000 – GT10 and Alpha2 connection, December 2007
2
HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI
STEP 3 – communication cable
[2]: Use Alpha 2 GSM communication cable
to connect to GSM Port of ALPHA2:
• AL2-GSM-CAB, 142528
[4]: Create small RS232 Adapter cable (7 wires)
9-pin
DSUB
female
GT10
Terminal
block
Mitsubishi Electric – GOT1000 – GT10 and Alpha2 connection, December 2007
HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI
STEP 4 – Programming cable
• Programming Cable HMI
– Option #1 for Serial connections
(9pin, RS232)
• GT01-C30R2-6P, 163959
– Option #2 for USB connections
(USB mini)
QC30R2 or GT01-C30R2-6P
• USB/Serial Converter and USB Cable
• GT01-RS2TUSB-5S, 200500
• GT09-C30USB-5P, 166373
• Programming Cable
Alpha2
GT10-RS2TUSB-5S
GT09-C30USB-5P
– Serial connection
(9pin, RS232)
• AL-232CAB, 87674
Mitsubishi Electric – GOT1000 – GT10 and Alpha2 connection, December 2007
3
HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI
Successful Configuration Example
GT1020GT1020-LBD2 with RS232 CONNECTION
GT1020-LBD2
24VDC Power Supply (+10%,-15%)
AL2-GSM-CAB +
user-created
Adapter cable
GT01-C30R2-6P or
GT10-RS2TUSB-5S +
GT09-C30USB-5P
ALPHA2
AL-232CAB
Mitsubishi Electric – GOT1000 – GT10 and Alpha2 connection, December 2007
HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI
STEP 5 – Software 1
• GT-Works2
software Suite
– GT-Designer2
• MUST have Version
2. 73B or later to
support Alpha2
driver!!
• Alpha programming
software
Mitsubishi Electric – GOT1000 – GT10 and Alpha2 connection, December 2007
4
HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI
STEP 5 – Software 2
• Select
ALPHA2 driver
• Install new OS and ALPHA2 driver
to GT10 HMI
– => See next page!
Mitsubishi Electric – GOT1000 – GT10 and Alpha2 connection, December 2007
HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI
STEP 5 – Software 3
• Switch GT10 into
“OS installation
mode”
• Install new OS and
ALPHA2 driver to
GT10
• Download
GT Designer and
ALPHA
applications
Mitsubishi Electric – GOT1000 – GT10 and Alpha2 connection, December 2007
5
HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI
Alpha2 Device range available
for GOT1000 series
• The device ranges of
Alpha2 that can be used
for GOT are shown in the
right table.
• Note that the device
ranges in the right table
are the maximum values
that can be set in
GT Designer2.
• When a non-existent
device or device No.
outside the range is
specified, other objects
may not be monitored.
Mitsubishi Electric – GOT1000 – GT10 and Alpha2 connection, December 2007
6