Better Music Builder VM-93C G2 Operating instructions

®
®
Unlike any others ... that’s cost & value for you
Professional UHF Wireless Microphone System
VM-93C G2
Operating Instructions
UHF
Frequency Selectable
UHF WIRELESS SYSTEM VM-93C G2
UHF WIRELESS SYSTEM VM-93C G2
VM-93C G2 CHARGER
VOLUME
MICROPHONE 1
SET
VOL
CH
22 25
2450.00
POWER ACTIVE
VOLUME
MICROPHONE 2
POWER
MHz
ACTIVE POWER
VM-93C G2
2 Wireless Microphone System
VOL
CH
18 28
2456.00
SET
UHF
MHz
2-IN-1 BASE RECEIVER MODULE
G2 SERIES
Generation 2
2-in-1 Base Module ***1 Receive Module with 2 Wireless Microphones System
Thank you for purchasing this unit. To
make full and effective use of this unit,
please read this Owner's Manual
carefully before operating it. Please
retain this manual for future reference.
Passionate about Music
www.BetterMusicBuilder.com
CONTENTS
INTRODUCTION................................................................................ 1
Intro
SYSTEM FEATURES............................................................................. 1
Features
Package
Base Module
hand-held
Operation
PACKAGE ACCESSORIES................................................................... 2
2-in-1 BASE MODULE........................................................................ 3
• Controls and Functions................................................................. 3~4
• Hardware Setup.............................................................................5~6
HANDHELD MICROPHONE............................................................... 7
• Controls and Functions...................................................................... 7
• Controls and Functions: Rechargeable Charger........................... 7
OPERATION.................................................................................8~10
• How to Select Frequencies/Channel.......................................... 8~9
• How to Adjust Microphone Volume.............................................. 10
• How to Turn On/Off Microphone................................................. 10
• How to Interchange Microphone Head........................................10
TECHNICAL SPECIFICATION.............................................................11
Spec
TROUBLESHOOTING.................................................................. 12~13
Troubleshooting
APPENDIX..................................................................................14~15
Appendix
WARRANTY..................................................................................... 16
Warranty
CONTACT INFORMATION............................................................... 17
Contact Us
INTRODUCTION
Intro
Better Music Builder VM-93C G2 Wireless Microphone is certainly the most
innovative model we’ve ever had! Equipped with the latest 2.4 GHz wireless
technology, the sleek system features heavy duty UHF dual-channel
microphones, Wireless Auto Sync System technology, and for the first time ever
uses lithium-ion battery for extremely long battery life.
Built for professional entertainers, the VM-93C G2 Wireless Microphone is
packed with the newest technologies and innovations to improve your
performance and simplify your setup. The built-in Wireless Auto Sync System
makes setting up frequencies a breeze. Using the technology, there is no need
to manually adjust the microphone’s frequency. With a touch of the button, the
microphone automatically sets it to create a complete interference free and
crystal clear microphone system.
Clear Voice technology is pure genius. It enhances the sound of the vocal by
detecting and eliminating artifact noises, thus creating crystal clearer sound. The
result is a sound closer resembles that of a wired microphone. What you get is
a cleaner and clearer sound at all audio levels.
With years of experience designing wireless microphone system, we at Better
Music Builder understand the problem with short battery life. Well, that’s a thing
of the past now. The VM-93C G2 Wireless Microphone can easily last 12
hours! It is our first ever wireless microphone to use rechargeable lithium-ion
battery, commonly used in today’s portable electronics such as mobile phones
and computer laptops. It is simply the best solution for home and professional
karaoke performance!
Features
SYSTEM FEATURES
1. Equipped with the latest 2.4 GHz wireless technology and UHF dual-channel
in a 2-in-1 Base Module to pick up weak signals and prevent signal
interference.
2. Clear LCD screen displays Radio Frequency, Volume, Channel, and
Frequency.
3. Wireless Auto Sync System technology makes setting up a breeze.
4. Clear Voice technology delivers crystal clearer sound just like a wired
microphone.
5. 32 selectable channels!
6. 12 hours of battery life using rechargeable lithium-ion battery.
7. Charger base provided.
8. Adjustable antennas for better signal receiving.
1
PACKAGE ACCESSORIES
Package
The package comes with one 2-in-1 Base Module [Receiver], two handheld
microphones, one charge base, two receiver antennas, and two AC-Power
cords.
VOLUME
MICROPHONE 1
SET
VOL
CH
22 25
2450.00
POWER ACTIVE
VOLUME
MICROPHONE 2
POWER
MHz
ACTIVE POWER
VM-93C G2
2 Wireless Microphone System
VOL
CH
18 28
2456.00
SET
UHF
MHz
2-IN-1 BASE RECEIVER MODULE
G2 SERIES
Generation 2
2-IN-1 BASE MODULE [RECEIVER]: 1 SET
4.3 inches
10.8 cm
UHF WIRELESS SYSTEM VM-93C G2
UHF WIRELESS SYSTEM VM-93C G2
RECEIVER ANTENNA: 2 UNITS
HANDHELD MICROPHONE: SET of 2
AC-POWER CORD: 2 UNITS
VM-93C G2 CHARGER
HANDHELD MICROPHONE CHARGE BASE: 1 SET
2
Base Module
2-in-1 BASE MODULE [RECEIVER]
CONTROLS AND FUNCTIONS
VOLUME
MICROPHONE 1
SET
VOL
CH
22 25
2450.00
VOLUME
MICROPHONE 2
POWER
POWER ACTIVE
ACTIVE POWER
MHz
CH
UHF
SET
MHz
G2 SERIES
Generation 2
2-IN-1 BASE RECEIVER MODULE
1
2
3
VM-93C G2
2 Wireless Microphone System
VOL
18 28
2456.00
4
5
6
7
8
9
10
11
FRONT PANEL:
1. MIC 1 VOLUME CONTROL: Controls volume. When pressed,
channel/frequency can be adjusted.
2. MIC 1 SET BUTTON: Confirms selection. Holding the button for 3 seconds
to initiate syncing process with the microphone.
3. MIC 1 LCD SCREEN: Displays system status.
4. MIC 1 POWER INDICATOR: Lights up when the receiver is powered ON.
5. MIC 1 ACTIVE INDICATOR: Lights up when the microphone is ready for
usage. Blinks when the receiver is in the syncing process.
6. POWER BUTTON: Turns the system ON/OFF.
7. MIC 2 ACTIVE INDICATOR: Lights up when the microphone is ready for
usage. Blinks when the receiver is in the syncing process.
8. MIC 2 POWER INDICATOR: Lights up when the receiver is powered ON.
9. MIC 2 LCD SCREEN: Displays system status.
10. MIC 2 SET BUTTON: Confirms selection. Holding the button for 3 seconds
to initiate syncing process with the microphone.
11. MIC 2 VOLUME CONTROL: Controls volume. When pressed,
channel/frequency can be adjusted.
3
LCD PANEL:
After turning on the “POWER” button, LCD screen will display the following:
12
14
VOL
CH
22 25
2450.00
13
MHz
15
12. VOLUME: Displays the current microphone volume.
13. RADIO FREQUENCY: Strength indicator of radio signal.
14. CHANNEL: Displays the current channel.
15. FREQUENCY: Displays the current frequency.
REAR PANEL:
MICROPHONE 2 AUDIO OUT
®
Better Music Builder®
MICROPHONE 1 AUDIO OUT
G2 SERIES
Generation 2
Model No.: VM-93C G2
(UHF Microphone)
ANTENNA-A
XLR BALANCED
¼” UNBALANCED
16
17
CALIFORNIA, UNITED STATES OF AMERICA
E-MAIL: sales@bettermusicbuilder.com
w w w . B e t t e r M u s i c B u i l d e r. c o m
ENGINEERED AND DESIGN IN U.S.A.
ANTENNA-B
360110810500
SERIAL NO.
18
XLR BALANCED
¼” UNBALANCED
19
20
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Taking apart or modifying the
receiver may lead to electric shock,
fire, or damage to the receiver and
will void your warranty.
AC-POWER
120V / 60Hz
21
22
16. MIC 2 BALANCED OUTPUT: Balanced XLR audio output.
17. MIC 2 UNBALANCED OUTPUT: Unbalanced 1/4 inch audio output.
18. ANTENNA-A: Connect antenna to BNC socket here.
19. MIC 1 BALANCED OUTPUT: Balanced XLR audio output.
20. MIC 1 UNBALANCED OUTPUT: Unbalanced 1/4 inch audio output.
21. ANTENNA-B: Connect antenna to BNC socket here.
22. POWER SUPPLY: Removable AC power cord with AC 120V / 60Hz.
4
HARDWARE SETUP
Set Up
HOW TO CONNECT AUDIO OUTPUT:
There are four audio outputs as shown in the below diagram:
MICROPHONE 2 AUDIO OUT
®
Better Music Builder®
MICROPHONE 1 AUDIO OUT
G2 SERIES
Generation 2
Model No.: VM-93C G2
(UHF Microphone)
ANTENNA-A
XLR BALANCED
2
1
CALIFORNIA, UNITED STATES OF AMERICA
E-MAIL: sales@bettermusicbuilder.com
w w w . B e t t e r M u s i c B u i l d e r. c o m
ENGINEERED AND DESIGN IN U.S.A.
ANTENNA-B
360110810500
SERIAL NO.
¼” UNBALANCED
XLR BALANCED
MIC 2 UNBALANCED OUTPUT
MIC 2 BALANCED OUTPUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Taking apart or modifying the
receiver may lead to electric shock,
fire, or damage to the receiver and
will void your warranty.
4
3
AC-POWER
120V / 60Hz
¼” UNBALANCED
MIC 1 UNBALANCED OUTPUT
MIC 1 BALANCED OUTPUT
1. MIC 2 BALANCED OUTPUT is balanced audio output using XLR connection.
The grounding of the balanced XLR connection delivers better quality signal by
reducing noise.
2. MIC 2 UNBALANCED OUTPUT is unbalanced audio output using ¼ inch
connection.
3. MIC 1 BALANCED OUTPUT is balanced audio output using XLR connection.
The grounding of the balanced XLR connection delivers better quality signal by
reducing noise.
4. MIC 1 UNBALANCED OUTPUT is unbalanced audio output using ¼ inch
connection.
Recommend
We highly recommend using balanced XLR connections if the distance between the
microphone receiver and the mixer is more than 10 feet. The grounding of the balanced XLR
connection delivers better quality signal by reducing noise.
UHF WIRELESS SYSTEM DIAGRAM:
UHF WIRELESS SYSTEM VM-93C G2
UHF WIRELESS SYSTEM VM-93C G2
MIC 1 HANDHELD MICROPHONE
MICROPHONE 2 AUDIO OUT
®
Better Music Builder®
MIC 2 HANDHELD MICROPHONE
MICROPHONE 1 AUDIO OUT
G2 SERIES
Generation 2
Model No.: VM-93C G2
(UHF Microphone)
ANTENNA-A
XLR BALANCED
REAR VIEW
¼” UNBALANCED
CALIFORNIA, UNITED STATES OF AMERICA
E-MAIL: sales@bettermusicbuilder.com
w w w . B e t t e r M u s i c B u i l d e r. c o m
ENGINEERED AND DESIGN IN U.S.A.
ANTENNA-B
360110810500
SERIAL NO.
XLR BALANCED
¼” UNBALANCED
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Taking apart or modifying the
receiver may lead to electric shock,
fire, or damage to the receiver and
will void your warranty.
AC-POWER
120V / 60Hz
BALANCE CONNECTION
XLR
XLR
XLR
XLR
Balance Input Balance Input Balance Input Balance Input
1/4"
1/4"
1/4"
1/4"
Unbalance Input Unbalance Input Unbalance Input Unbalance Input
AUDIO MIXER AMPLIFIER OR A KARAOKE UNIT INPUT TERMINAL
5
HOW TO CONNECT AC-POWER CORD:
MICROPHONE 2 AUDIO OUT
®
Better Music Builder®
MICROPHONE 1 AUDIO OUT
G2 SERIES
Generation 2
Model No.: VM-93C G2
(UHF Microphone)
ANTENNA-A
XLR BALANCED
¼” UNBALANCED
CALIFORNIA, UNITED STATES OF AMERICA
E-MAIL: sales@bettermusicbuilder.com
w w w . B e t t e r M u s i c B u i l d e r. c o m
ENGINEERED AND DESIGN IN U.S.A.
ANTENNA-B
360110810500
SERIAL NO.
XLR BALANCED
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Taking apart or modifying the
receiver may lead to electric shock,
fire, or damage to the receiver and
will void your warranty.
¼” UNBALANCED
AC-POWER
120V / 60Hz
REAR VIEW
AC Power Cord
For the North America market, use AC 120V 60Hz POWER CORD. For market
outside North America, use 220V~240V.
NOTE
Please make sure to use the right AC Power Cord. Otherwise, it may damage the 2-in-1
Base Module or the CHARGER BASE because their maximum battery capacity is different. The
product warranty will be void if there is damage caused by using the wrong AC Power Cord.
6
HANDHELD MICROPHONE
Hand-held
CONTROLS AND FUNCTIONS
UHF WIRELESS SYSTEM VM-93C G2
1
2
1. INTERCHANGEABLE MICROPHONE HEAD
2. POWER BUTTON: Turns the microphone ON/OFF. Holding the button for
5 seconds to initiate syncing process with the receiver.
CONTROLS AND FUNCTIONS: RECHARGEABLE CHARGER
3
VM-93C G2 CHARGER
AC-POWER
90V~240V/50Hz~60Hz
RISK OF ELECTRIC SHOCK
DO NOT OPEN
FRONT VIEW
SIDE VIEW
4
3. CHARGER BASE INDICATOR: Red light indicates that the battery is being
charged. Green light indicates that the battery is fully charged. It takes
approximately 6 hours for a full charge. The battery is not under our
product warranty.
4. POWER SUPPLY: For the North America market, use POWER CORD with
AC 120V 60Hz. For market outside North America, use 220V~240V.
7
OPERATION
Operation
HOW TO SELECT FREQUENCY/CHANNEL
Setting up the best frequency channel is quick and easy. There are two
handheld microphones and each microphone is preset with 32 frequency
channels.
STEP 1: Press the VOLUME CONTROL on the receiver to go to channel
selection. Notice the blinking channel number.
VOLUME
MICROPHONE 2
ACTIVE POWER
VM-93C G2
2 Wireless Microphone System
VOL
CH
18 00
2400.00
UHF
SET
MHz
STEP 2: While the channel number is blinking, turn the VOLUME CONTROL
left and right on the receiver to change the channel (32 selectable frequency
channels). Then press the SET BUTTON on the receiver to confirm.
VOLUME
MICROPHONE 2
ACTIVE POWER
VM-93C G2
2 Wireless Microphone System
VOL
CH
18 28
2456.00
UHF
SET
MHz
STEP 3: Press and hold the SET BUTTON on the receiver for 4 seconds to
initiate the syncing process. Notice the blinking ACTIVE INDICATOR yellow
light on the receiver.
4 SECONDS
VOLUME
MICROPHONE 2
ACTIVE POWER
VM-93C G2
2 Wireless Microphone System
VOL
CH
18 28
2456.00
UHF
SET
MHz
8
STEP 4: While the ACTIVE INDICATOR light on the receiver is blinking, turn
ON the microphone and hold the POWER BUTTON on the microphone for 5
seconds to initiate the syncing process.
VOLUME
MICROPHONE 1
SET
VOL
CH
22 25
2450.00
POWER ACTIVE
VOLUME
MICROPHONE 2
POWER
ACTIVE POWER
VM-93C G2
2 Wireless Microphone System
VOL
CH
18 28
2456.00
UHF
SET
MHz
MHz
G2 SERIES
Generation 2
2-IN-1 BASE RECEIVER MODULE
Sy
ce
Pro
ng
i
c
n
ss
UHF WIRELESS SYSTEM VM-93C G2
IMPORTANT: For syncing to
work, the receiver and the
microphone have to initiate the
syncing process at the same time. It
means when holding the POWER
BUTTON during STEP 4, it has to
be done while the ACTIVE
INDICATOR is still blinking.
Otherwise, it will not work.
When the microphone is in sync with the receiver and is ready to be used, the
ACTIVE INDICATOR light will be on and the RADIO FREQUENCY will display
signal.
MICROPHONE 2
ACTIVE POWER
MICROPHONE 2
VOL
CH
18 28
2456.00
SET
ACTIVE POWER
MHz
VOL
CH
18 28
2456.00
SET
MHz
Each unit is fully tested and qualified by the manufacturer. However, due to the nature of
NOTE
wireless connection, interference may occur because of local environments and/or radio signals
emitted by other wireless devices within the household.
If MIC 1 or MIC 2 is actively picking up RADIO FREQUENCY signal when the handheld
microphone is turned off, this is an indication that the frequency is being used by some other active
device within a 200 feet radius. Therefore, selecting a different frequency is highly recommended.
9
HOW TO ADJUST MICROPHONE VOLUME
Turn VOLUME CONTROL:
Turn LEFT to decrease the volume and Turn RIGHT to increase the volume.
VOLUME
MICROPHONE 2
VM-93C G2
2 Wireless Microphone System
ACTIVE POWER
VOL
CH
18 28
2456.00
UHF
SET
MHz
Recommend
We recommend setting the microphone volume to a medium position, then control the
overall volume from the amplifier/mixer.
If the user does any damage to the receiver either accidentally or intentionally, we have
the right to void the warranty.
HOW TO TURN ON/OFF MICROPHONE
UHF WIRELESS SYSTEM VM-93C G2
Press the POWER BUTTON to
turn ON/OFF the microphone.
The POWER BUTTON lights up
when the microphone is ON.
NOTE
If the microphone cannot be turned ON, battery may be low and should be
recharged by placing the microphone onto the CHARGER BASE. Typical battery life is 12 hours.
Battery life may vary depending on usage.
HOW TO INTERCHANGE MICROPHONE HEAD
2
1
NOTE
Replacement parts such as the
INTERCHANGEABLE MICROPHONE
HEAD can be purchased from any of
our authorized dealers.
UHF WIRELESS SYSTEM VM-93C G2
INTERCHANGEABLE
MICROPHONE HEAD
10
TECHNICAL SPECIFICATION
Spec
A. TECHNICAL FEATURE OF THE 2-IN-1 BASE MODULE:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Frequency Range: 2400MHz~2462MHz
Channels: 32
Signal to Noise Ratio: > 95dB
Total Harmonic Distortion: < 0.1%
Frequency Response: 30Hz ~ 18kHz (±1dB)
Dynamic Range: 110dB
S/N Ratio: > 95dB
Effective Distance: 120 feet
Image & Spurious Rejection: > 85dB
Channel Rejection: > 80dB
Receiver Sensitivity: -85dB
Audio Output Level: Unbalanced Out: 0~300mV
Power Supply: AC 120V 60Hz
Receiver Dimensions (WxHxD):19 x 1.8 x 7.5 (inches)/48.3 x 4.5 x 19 (cm)
Package Dimensions (WxHxD):23.6 x 10 x 5 (inches)/60 x 25.5 x 13 (cm)
Shipping Weight: 8.8 lbs / 4 kg
B. TECHNICAL FEATURE OF THE MICROPHONE:
1.
2.
3.
4.
5.
6.
Transmitter Power: ≤ 20mV
Max Deviation: 48kHz
Spurious Emission: -60dB
Battery: Rechargeable Lithium-ion Battery
Continuous Usage: Up to 12 Hours
Microphone Dimensions (WxH): 9.9 x 1.9 (inches) / 25.1 x 4.9 (cm)
C. THIS SYSTEM INCLUDES THE FOLLOW:
•
•
•
•
•
•
2-in-1 Base Module: 1 Set
Handheld Microphone: Set of 2
Handheld Microphone charge base: 1 Set
Antenna: 2 Units
AC-Power Cord: 2 Units
Instructional Manual: 1 Unit
11
TROUBLESHOOTING
Troubleshooting
CAUTION: Before troubleshooting any symptoms, make sure equipments
are turned OFF.
1. SYMPTOM: NO SOUND COMING FROM MICROPHONE
CAUSE: There is no indication of signal.
REMEDIES:
A. Battery may be low and should be recharged by placing the
microphone onto the CHARGER BASE.
B. Microphone and receiver should be in the same channel to allow
transmitting and receiving signal.
C. Volume is turned to a low level and should be turned to a high but
comfortable volume level.
D. Make sure no wires inside the microphone are loose. If so, reconnect
wires if possible.
E. Make sure the microphone is turned ON; not OFF.
2. SYMPTOM: RECEIVER LCD IS OFF.
CAUSE: Receiver is unpowered.
REMEDIES:
A. AC POWER CORD should be connected properly.
B. Make sure the right AC POWER CORD is being used.
C. Determine whether there is indeed current coming from the power outlet.
3. SYMPTOM: NOISES.
CAUSE: There is interference within your area.
REMEDIES:
A. Make sure user is not standing too close to speakers. Microphone being
too close to speakers will create feedback unless microphone volume is
turned down.
B. Audio cable of poor quality should not be used. Switching to a cable of
higher quality such as a balanced XLR cable can reduce noise.
C. Switch to a model that uses a different set of channels when the above
remedies do not work.
12
4. SYMPTOM: DISTORTION IS INCREASING GRADUALLY.
CAUSE: Battery is running low.
REMEDIES:
A. Recharge battery as soon as possible.
B. Make sure to fully charge battery before use.
5. SYMPTOM: POOR SIGNAL.
CAUSE: Objects can be disrupting communication between receiver and
microphone.
REMEDIES:
A. Make sure no objects are between receiver and microphone, such as
walls and shelves.
B. Make sure microphone usage is not in perimeter of police, fire or radio
stations.
C. Devices that send out radio signals can be disruptive, such as cell
phones, radios, computers, etc.
D. Switch to a model that uses a different set of channels when the above
remedies do not work.
13
Appendix
APPENDIX
VM-93C G2 FCC FREQUENCY: 2400.00~2462.00 MHz
UHF Frequencies Available for Use for Home Electronics in North America
The RF radio frequencies used in the transmission of wireless information are
closely regulated in most countries including North America. A lot of countries
strictly enforce their regulations stating which RF frequencies are available for
use for certain device, so it can help limit the amount of radio frequency
interference in all wireless communications.
Please refer to the following table for MIC 1 and MIC 2 with available RF
frequencies. If the RF frequencies indicated in the following table are in conflicts
with the local wireless information law in your country, please switch to a
different product model or contact our technicians for advice.
FCC Information to User for Reference
This equipment is designed in compliance with the limits for a Class A digital
device pursuant to part 15 of the FCC Rules from the United States of America.
These limits are designed to provide protection against harmful interference
when the equipment is operated in public environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, so that the user will be
required to correct the interference at his own expense.
14
MIC 1 & MIC 2 FREQUENCY: 2400.00~2462.00 MHz
Microphone 1 Frequency
CH
FREQUENCY
CH
Microphone 2 Frequency
FREQUENCY
CH
FREQUENCY
CH
FREQUENCY
0
2400.00
16
2432.00
0
2400.00
16
2432.00
1
2402.00
17
2434.00
1
2402.00
17
2434.00
2
2404.00
18
2436.00
2
2404.00
18
2436.00
3
2406.00
19
2438.00
3
2406.00
19
2438.00
4
2408.00
20
2440.00
4
2408.00
20
2440.00
5
2410.00
21
2442.00
5
2410.00
21
2442.00
6
2412.00
22
2444.00
6
2412.00
22
2444.00
7
2414.00
23
2446.00
7
2414.00
23
2446.00
8
2416.00
24
2448.00
8
2416.00
24
2448.00
9
2418.00
25
2450.00
9
2418.00
25
2450.00
10
2420.00
26
2452.00
10
2420.00
26
2452.00
11
2422.00
27
2454.00
11
2422.00
27
2454.00
12
2424.00
28
2456.00
12
2424.00
28
2456.00
13
2426.00
29
2458.00
13
2426.00
29
2458.00
14
2428.00
30
2460.00
14
2428.00
30
2460.00
15
2430.00
31
2462.00
15
2430.00
31
2462.00
15
WARRANTY
Warranty
One-Year Limited Warranty for Home Use Equipment
Our one-year warranty applies to speakers, amplifiers, mixers and microphones for
home use only. It covers both parts and labors. The warranty becomes effective on
the date of your purchase.
Our warranty only covers defects due to product defectiveness with free of defects
in materials or workmanship. However, our warranty does not cover defects due to
normal wears, damage in transit, improper use, abuse or failure to follow the proper
instructions for maintenance. This warranty is void in the event of unauthorized
repairs, alternations, modifications and removing of the product label.
Please also note that our warranty does not cover any shipping cost for the return of
defective products to us for inspection, repair and maintenance. Our warranty for
Better Music Builder products can only be executed in North America.
NOTE
Our warranty does not cover the battery for wireless microphone products.
90-Day Limited Warranty for Public and Commercial Use Equipment
Our 90-day warranty applies to speakers, amplifiers, mixers and microphones for
both public and commercial use such as restaurant, coffee shop, KTV nightclub,
church and school, etc. It covers both parts and labors. The warranty becomes
effective on the date of your purchase.
To Register Your Warranty
Please submit the warranty card that cames with your unit; it is also download on
our website . However, we need the invoice for your purchase in order to process
this warranty. You may also register your warranty online.
Please visit our website at w w w.B et terM usic B uil d er.com.
PRECAUTION
1. If using more than one microphone system, please select the operating
frequency or signal channel carefully so as to avoid disturbing.
2. The input power voltage of the 2-in-1 Base Module is 110V/120V (±10%). If it is
too low or too high, it will affect the work of the machine.
3. When installing batteries, reversing the electrode will damage the machine.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Caution: To reduce the risk of electrical shock, do not
remove the cover (or back). No user serviceable parts
inside: refer servicing to qualified personnel.
Warning: To reduce the risk of fire or electrical shock,
do not expose this appliance to rain or moisture.
16
This symbol, wherever it appears, alerts
you to the presence of uninsulated
dangerous voltage inside the enclosure
voltage that may be sufficient to
constitute a risk of shock.
This symbol, wherever it appears, alerts
you to important operating and
maintenance instructions in the
accompanying literature. Read the
manual.
CONTACT INFORMATION
Contact Us
MAILING ADDRESS
BETTER MUSIC BUILDER
29300 Kohoutek Way #150
Union City, CA 94587
U.S.A.
TELEPHONE NUMBERS
USA Region
USA Toll Free: 1-800-318-2218
Sales & Marketing: 510-477-9955
Customer Service: 510-477-9955
FAX NUMBERS
USA Region
Sales & Marketing: 510-477-9922
Customer Service: 510-477-9922
WORLD WIDE WEB
E-mail: sales@bettermusicbuilder.com
Website: www.bettermusicbuilder.com
17
MAINTENANCE
NOTE
18
MAINTENANCE
NOTE
19
Better Music Builder is a leader in the Audio and
Karaoke equipment industry. We are committed
to offering you the high quality audio product.
We may update our manual, so we highly
recommend you to download the free update
from our website www.BetterMusicBuilder.com.
®
®
Unlike any others ... that’s cost & value for you
Passionate about Music
www.BetterMusicBuilder.com
360110910500
Code: 20111001
Printed on 100% Recycled Paper Comments E-mail to sales@bettermusicbuilder.com Copyright © 2011 Better Music Builder. All rights reserved. Legal trademark.