qvi25fbGas FireBrick ® Insert

qvi25fb
Gas FireBrick® Insert
qvi25fb
F
ireBrick® Technology from Quadra-Fire offers you a stunning new
alternative for upgrading your existing fireplace. Utilizing a new
patented process, the firebox and interior brick lining are molded from
Firebrick material to capture that traditional wood fireplace look. This
seamless firebox construction also allows us
to use larger glass, giving you a better view
into those soothing flames and logs. This quiet
and durable material is extremely efficient.
FireBrick pushes the heat into the room instead
of absorbing and losing heat into the fireplace itself. Three front options
are available in several finishes to help you complement your original
fireplace and room décor. The model qvi25fb will operate during an
electrical power outage and is the best choice for high efficiency and
heat output in smaller fireplaces.
Standard Features
•
•
•
•
•
•
•
•
•
Options
3 Available Fronts:
•
•
•
2 Panel Sizes
Adjustable Hearth Support
Variable Speed Blower (160 cfm)
•
•
Screen Only, Bi-fold Glass Door, Sun Prairie with Cabinet Doors
IMPORTANT: Not to be used with Bi-fold Glass Door
3 Available Remote Controls including On/Off with Digital
Thermostat Control
2 Wall Thermostats
A
vailable Fronts
Screen Only shown
Bi-fold Glass Doors
20-3/8
9-11/16
18-15/16
14-7/16
29-1/8
14 5/8
GAS INLET
Clearances
12”
MAX.
331 sq. in. of Viewing Glass
High Efficiency FireBrickTM Firebox
Six Piece Glowing Log Set
Inviting Fire with Glowing Coals
Tapered Firebox
Decorative Andirons
Adjustable Flame
Quiet Operation
PANEL SIZES
Limited Lifetime Warranty
Standard................ 40” x 28”
Large...................... 40” x 32”
•
Dimensions
MINIMUM FIREPLACE SIZE
MANTEL
12” MIN.
TOP OF UNIT
Location
Inches
Millimeters
Front Width
30 7/8”
784
Rear Width
25 5/8”
651
Depth
15”
381
Height*
19 1/2”
495
*NOTE: If exhaust collar on insert and fireplace damper do
not line up, add 4 inches (102mm) to minimum fireplace
height for bends in vent pipe.
Technical Data
Width (front).................29 1/8”
Width (back).................20 3/8”
Height (front)............18 15/16”
Height (back)................14 5/8”
Depth...........................14 7/16”
Shipping Weight............99 lbs.
Flue Size.. Dual 3” Direct Vent
Chimney Liner
Bedroom Approved........... Yes
Performance
Heating Capacity..................Up to 1,500 sq. ft.*
BTU Input NG......................21,800 - 29,650
BTU Input LP........................16,000 - 27,000
Efficiency...............................up to 80% NG / 81% LP
Canadian P4 Efficiencies: NG 58.67% / LP 55.8%
The strongest in the industry, Quadra-Fire provides
a limited lifetime warranty on gas-burning products for their most important aspects: firebox and
heat exchanger.
Sun Prairie with Cabinet
Doors shown in Hammered
Pewter. Also available in
Black.
Available From:
For full warranty details go to www.quadrafire.com
IMPORTANT - READ BEFORE YOU INSTALL!
Refer to the Owner/Installation Manual for complete clearance requirements and
specifications. The images and descriptions in this brochure are provided to assist you
in product selection only.
*Heating capacity rating is to be used as a guideline only and may differ slightly due to
climate, building construction and condition, amount and quality of insulation, location
of the heater, and air movement in the room.
Visit our Website at www.quadrafire.com
Quadra-Fire is a registered trademark of Hearth & Home Technologies. Product specifications and pricing subject to change without notice. The Quadra-Fire qvi25fb direct vent gas fireplace heater is listed
by Underwriters Laboratories and is approved for Canada and USA to ANSI Z21.88-2002/CSA 2.332002, Vented Gas Fireplace Heaters, and UL307B.
QDF-1012U-1108