User’s manual
www.vtech.com
Model: VT1010/VT1010T
VT1515/VT1616
DECT
Table of contents
Important Safety Instructions .......................................1
Setting up the telephone.................................... 2
Package Contents ........................................................3
Location ........................................................................3
Connecting the telephone ............................................3
Connecting the base station ........................................3
Installing and charging the batteries ............................4
Getting to know your phone .............................. 5
Overview of the handset ..............................................5
Overview of the base station ........................................6
Displays, keys , icons ...................................................7
Using your phone................................................ 9
Make a call ....................................................................9
Preparatory Dialing.......................................................9
Direct Dialing ................................................................9
Call from the phonebook ..............................................9
Call from the calls log ...................................................9
Call from the redial list .................................................9
Call timer.......................................................................9
Answer a call ..............................................................10
End a call ....................................................................10
Adjust Earpiece and Handsfree Volume .................... 10
Mute a call ..................................................................10
Set the Silent Mode ....................................................10
Turn on the Keypad Lock............................................10
Make an internal call (for VT1010T / VT1515 / VT1616 only) .... 11
Intercom Another Handset
(for VT1010T / VT1515 / VT1616 only) .......................11
I
Call All Handsets
Transfer an External Call to another handset
(for VT1010T / VT1515 / VT1616 only ) ..................... 11
Make a 3 -way Conference Call
(for VT1010T / VT1515 / VT1616 only ) .................... 11
Redial ................................................................. 12
Redial the last number ............................................... 12
Redial a number from the Redial list .......................... 12
Store a Redial Number into the Phonebook .............. 12
Delete a Redial Number ............................................. 12
Delete the Entire Redial List....................................... 12
Call List .............................................................. 13
Caller display ( Network Dependent ) ........................ 14
View the Call List ........................................................ 13
Store a Call List Number into the Phonebook ........... 13
Delete an entry in the Call List ................................... 14
Delete the entire list of the Call List ........................... 14
View the Details OF THE Call List Entry .................... 14
Phonebook......................................................... 15
Private Phonebook ..................................................... 15
Add a New Phonebook Entry ..................................... 15
View a Phonebook Entry ............................................ 15
Edit a Phonebook Entry.............................................. 15
Delete A phonebook Entry ......................................... 16
Delete the Entire Private Phonebook ......................... 16
Check the Phonebook Usage .................................... 16
Text and Digit Entry Table .......................................... 17
www.vtech.com
Table of contents
Base Settings..................................................... 18
Dial Type...................................................................... 18
Change the dial mode................................................. 18
Change the system PIN Code..................................... 18
Paging (Find the handset)........................................... 18
Troubleshooting................................................. 25
Technical Specification...............................................26
Handset Settings............................................... 19
Alarm Settings............................................................. 19
Turn on/off the Alarm................................................... 19
Set the Alarm Time...................................................... 19
Ringer Setup................................................................20
Set the Ringer Melody for Internal Calls.....................20
Set the Ringer Melody for External Calls....................20
Set the Ringer Volume................................................20
Tone Setup..................................................................21
Set Key Tone...............................................................21
Set Battery Tone..........................................................21
Set Out Of Range Tone...............................................21
Set the Handset Language.........................................22
Rename the Handset..................................................22
Set Handset Display....................................................22
Set the Auto Answer....................................................23
Date and Time Settings..................................... 23
Change the Date Format.............................................23
Change the Time Format............................................23
Set the Time................................................................24
Set the Date.................................................................24
Reset your Phone........................................................24
www.vtech.com
II
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric
shock and injury, including the following:
1) Read and understand all the instructions.
2) Follow all warnings and instructions marked on the product.
3) Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
4) Do not use this product near water (for example, near a bath tub, kitchen sink, swimming pool).
5) Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
6) Unplug this product from the wall outlet and refer servicing to Vtech under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If the product does not operate normally by following the operating instructions.
• If the product has been dropped and the cabinet has been damaged.
• If the product exhibits a distinct change in performance.
7) Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock
from lightning.
8) Do not use the telephone to report a gas leak in the vicinity of the leak.
9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation periods for the handsets are only applicable with
the default battery capacities
10)The use of other battery types or non-rechargeable batteries/primary cells can be dangerous. These may cause interference
and/or unit damages. The manufacturer will not be held liable for damage arising from such non-compliance.
11)Do not use third party charging bays. The batteries may be damaged.
12)Please note the correct polarity while inserting the batteries.
13)Do not immerse batteries in water, do not place in fire.
If you have questions about this product, or having difficulty with setup or operation, call our Vtech Electronics ( HK LTD).
Customer Service Centre : 852-2776 3223
Technical Inquiry Hotline : 852-2667 7433
1
Installation
Setting up the telephone
Package contents
The package for the VT1010/VT1010T/VT1515/VT1616 contains the following items:
VT1010
• 1 Handset
• 1 Base station
• 1 AC power adapter
• 1 Telephone line cord
• 2 rechargeable batteries
• 1 English user manual and
1 Chinese user manual
VT1010T
• 2 Handsets
• 1 Base station
• 2 AC power adapters
• 1 Telephone line cord
• 1 Charger
• 4 rechargeable batteries
• 1 English user manual and
1 Chinese user manual
VT1515 / VT1616
• 3 Handsets
• 1 Base station
• 3 AC power adapters
• 1 Telephone line cord
• 2 Chargers
• 6 rechargeable batteries
• 1 English user manual and
1 Chinese user manual
Location
The maximum range between the base station and the handset is approximately 300 meters. Depending on
the surrounding conditions as well as spatial and structural factors, the range may be reduced. The range
indoors is normally less than outdoors.
www.vtech.com
2
Connecting the telephone
• Your
telephone
will not
function if the
mains plug
or adapter is
not plugged
in. Thus, first
charge the
battery before
you connect
the unit with
the telephone
network.
The unit will
function only
if it is charged
completely.
Before you can start using your telephone you must plug in the telephone connection cords and the mains
cable.
Connecting the base station
1) Plug the power supply & line cord into the base station.
2) Plug the power supply & line cord into the wall socket.
3) Always use the cables provided in the box.
Socket for telephone
Socket for mains cable
3
www.vtech.com
connection cord
Installation
Installing and charging the batteries
1)
2)
3)
4)
Slide open the battery compartment cover.
Place the 2 batteries as indicated. Respect polarity.
Slide the battery compartment cover back.
Put the handset on the base and charge for 14 hours first time. A beep indicates that the handset is properly
placed on the base or charger.
Use only the power pack provided for the base station.
Use only NiMH rechargeable batteries.
www.vtech.com
4
Getting to know your phone
Overview of the handset
5. TALK ON
1. LEFT SOFT KEY (MENU/OK)
In idle mode: Press to access the main menu
In sub-menu mode: Press to confirm the selection
During a call: Press to access Phonebook/ Redial List/
Call List/ Intercom
2. RIGHT SOFT KEY (CLEAR/BACK/MUTE/
INTERCOM)
In main menu mode: Press to go back to idle screen
In sub-menu mode: Press to go back to previous level
In sub-menu mode: Press and hold to go back to idle
screen
In editing / predialing mode: Press to clear a character / digit
In editing / predialing mode: Press and hold to delete all the
characters / digits
During a call: Press to mute / unmute the microphone 1
In idle mode: Press to intercom another handset
3. UP
5
In idle mode: Press to access the call list
In menu mode: Press to scroll up the menu items
In menu mode: Press and hold continuously to perform a
continuous up-scrolling of the menu.
In Phonebook list / Redial list / Calls log: Press to scroll
up the list
7
During a call: Press to increase the volume
In ringing: Press to increase the ringer volume
4. DOWN
8
In idle mode: Press to access the redial list
9
In menu mode: Press to scroll down the menu items
In menu mode: Press and hold continuously to perform a
continuous down-scrolling of the menu.
In Phonebook list / Redial list / Calls log: Press to scroll
down the list
During a call: Press to decrease the volume
In ringing: Press to decrease the ringer volume
5
www.vtech.com
12
In idle / predialing mode : Press to make a call
In Redial list / Calls Log / Phonebook entry: Press to
make a call to the selected entry in the list During ringing:
Press to answer a call
6. TALK OFF
During a call: Press to end a call and go back to idle
screen
In menu / editing mode: Press to go back to idle screen
In idle mode: Press and hold to power off the handset
In idle mode (when the handset is powered off): Press to
power on the handset
2
3
4
6
7. ALPHANUMERIC KEYPAD, * (STAR), #
(HASH)
Press to insert a digit / character / * / #
* key in idle mode: Press and hold to turn off the ringer
* key during a call (in Pulse mode): Press to switch to
tone mode
# key in Idle mode: Press and hold to turn on / off the
keypad lock
0 key in idle / predialing / number editing mode: Press and
hold to insert a pause
8. SPEAKERPHONE
10
11
During a call: Press to turn on / off the speakerphone.
In Idle mode / predialing mode / Redial list / Calls
Log / Phonebook entry: Press to make a call with
speakerphone
During ringing: Press to answer a call with speakerphone
9. PHONEBOOK
In idle mode: Press to access the phonebook list
10. FLASH
In idle / predialing mode: Press to insert a flash
During a call: Press to dial a flash
11. MICROPHONE
12. EARPIECE
Getting to know your phone
Overview of the base station
1. PAGE
Press the Page on the base station to page your handset. It will ring for approximately 60 seconds.
Press
on the handset or
on the base to stop the paging.
2. Charging cradle for the handset.
Telephone settings
Charging cradle for the handset.
Page key
www.vtech.com
Getting to know your phone Displays, keys, icons
The LCD display gives you information on the current status of the telephone.
Icon Description:
Scroll up / down the menu items / Phonebook list / Redial list / Call List
Steady when the handset is in range of the base. Flash when out of range of the base or not registered
to the base.
Steady when an intercom is in progress.
Flash when there is an incoming internal call.
Indicate a call is in progress.
Indicate that handsfree is being used.
Indicate that the ringer is switched off.
Steady when an alarm is set. Flash when the alarm time set before reaches.
Indicate that the keypad is locked.
www.vtech.com
Indicate when the battery is fully charged.
Flash when the unit performs initial charging.
Indicate when the battery needs charging.
Flash when low battery power level is detected.
Telephone settings
Indicate when more characters are existed before the text currently displayed.
Indicate when more characters are existed after the text currently displayed.
(MENU)
Press to select more menu options if applicable
Press to confirm the current selection if applicable.
(INT)
(BACK)
Press to conduct Intercom call when idle
Press to go back to previous menu level or cancel the current action if applicable
Press to clear a character or stop the alarm if applicable, press to mute / unmute during a call.
www.vtech.com
Using your phone
Make a Call
Preparatory Dialing
Enter the phone number and press
or
to dial the number. Press
to clear the entry.
Direct Dialing
Press
or
to take the line and enter the phone number.
Call from the phonebook
Press to access the phonebook and press / to select the desired phonebook entry. Press or to dial
out to the selected phonebook entry. Alternatively, press /OK to access the phonebook to get the desired
phonebook entry.
Call from the calls log
Press
to access the call log and press / to select the desired calls log entry. Press
or
to dial out to
the selected calls log entry. Alternatively, press /OK> to access the calls log from the main menu.
Call from the redial list
Press
to access the redial list and press / to select the desired redial number. Press
or
to the selected redial number. Alternatively, press
to access the redial list from the main menu.
to dial out
Call timer
Your handset automatically times the duration of every call. The call timer will display a few seconds after the
call has made. It is shown in hours, minutes and seconds format (HH:MM:SS).
www.vtech.com
Answer a Call
If the handset is not on the charging cradle:
When the phone rings, press
/
to answer a call.
If the handset is on the charging cradle or the base station and if AUTO ANSWER is set to ON:
When the phone rings, pick up the handset to answer a call.
During a call connection, press
Telephone settings
End a Call
to end the call.
OR
Put the handset on the base station to end the call.
Adjust Earpiece and Handsfree Volume
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of earpiece and handsfree volume.
During a call:
Press / to select volume 1-5. The current setting is shown. When you end the call, the setting will remain
at the last selected level.
Mute a Call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press
to mute the microphone and “MUTED” will display on the LCD. Your caller cannot hear you. Press
again to unmute the microphone.
Set the Silent Mode
In idle, press and hold
to turn off the handset ringer. The
Turn on the Keypad Lock
In idle, press and hold
to turn on the keypad lock. The
icon is displayed on the LCD.
icon is displayed on the LCD
www.vtech.com
10
Make an Internal Call ( For VT1010T / VT1515 / VT1616 only )
• If
only two
handsets are
registered to
the base
station, press
<INT> will
connect to
another
handset
immediately.
This feature is only applicable when there are at least two registered handsets. It allows you to make internal
calls, transfer external calls from one handset to another handset and make conference calls. If the called
handset is not answered within 20 seconds, the called handset will stop ringing and the calling handset will
return to standby mode.
Intercom Another Handset ( For VT1010T / VT1515 / VT1616 only )
1. In idle mode, press
and the registered handsets will display except the calling handset.
2. Enter the desired handset number to intercom with.
on the called handset to establish the internal call.
3. The called handset rings and press
Transfer an External Call to another handset ( For VT1010T / VT1515 / VT1616 only )
During an external call:
and / to select INTERCOM.
1. Press
2. Press <OK> to select the desired handset to intercom with.
3. The external call is put on hold automatically and the called handset rings.
on the called handset to establish an internal call.
4. Press
5. Press
on the calling handset or put the calling handset on the charging cradle to end the current call with
the external party.
6. The external call is transferred to the called handset.
Make a 3-way Conference Call ( For VT1010T / VT1515 / VT1616 only )
The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties
can share the conversation and no network subscription is required.
During an external call:
1. Press
and / to select INTERCOM.
2. Press <OK> to select the desired handset to intercom with.
3. The external call is put on hold automatically and the called handset rings.
on the called handset to establish an internal call.
4. Press
on the calling handset to establish the conference call.
5. Press and hold
11
Any handset hangs up during a conference call will leave the other handset still in connection with the external
call.
www.vtech.com
Redial
Redial the last number
You can redial up to 5 of the last numbers called. If you have stored a name in the phonebook to go with the number,
the name will be displayed instead. The most recent last number will display at the top of the redial list.
Redial a Number from the Redial List
there are
no numbers
in the redial
list, the
display shows
“EMPTY”.
Store a Redial Number into the Phonebook
1.
2.
3.
4.
5.
6.
7.
In idle mode, press
to access the redial list ,
Press / to select the desire number
and / to select ADD TO PB.
Press
Press OK to enter the name.
to edit the redial number to store into the phonebook.
Press OK or
Press OK to select phonebook melody.
Press OK and / to browse the melody list. The respective melody will be played when browsing the melody
list.
8. Press OK to confirm.
Delete a Redial Number
1.
2.
3.
4.
In idle mode, press
to access the redial list
Press / to select the desire number
and / to select DELETE.
Press
Press OK to confirm.
Delete the Entire Redial List
1.
2.
3.
4.
In idle mode, press
to access the redial list
Press / to select the desire number
and / to select DELETE ALL.
Press
Press OK to confirm.
www.vtech.com
12
Telephone settings
1. In idle mode, press
to access the redial list.
2. Press / to browse the redial list.
3. Press
/
to dial to the selected redial number.
• If
Call List
Caller display (Network Dependent)
This feature is available if you have subscribed the Caller Line Identification service with your network service
provider. Your phone can store up to 10 unanswered calls with date/time information in the calls log. The number
will be shown on the LCD when the phone is ringing. If the number matches with one of the entries in your Private
Phonebook, the caller’s name stored in the private phonebook will be displayed alternatively with the number.
The handset will ring with the melody associated with that phonebook entry.
If the caller number is disabled to send caller information, “WITHHELD” will display.
If the caller number is not provided, “UNAVAILABLE” will display.
If the caller is from network public phone, “PUBLIC” will display.
In standby, if three unanswered calls are received, “03 NEW CALLS” will be displayed.
View the Call List
All unanswered calls are saved in calls log with the latest call putting at the top of the list. When the call list is full, the
oldest call will be replaced by a new call. The unanswered call which has not been read is marked with a <* icon> at
the centre of the bottom line of the display.
1. Press
2. Press
to access the call list.OR Press
/ to select the desired entry.
and
/
to select CALL LIST.
Store a Call List Number into the Phonebook
1. Press
to access the call list.OR Press
and / to select CALL LIST.)
2 Press / to select the desired entry.
3. Press
and / to select ADD TO PB.
4. Press OK to enter the name.
5. Press OK and the selected call list number is displayed.
6. Edit the number if necessary.
7. Press OK and / to select the melody.
8. Press OK to confirm.
13
www.vtech.com
Delete an entry in the Call List
1. Press
2. Press
3. Press
4. Press
to access the call list.OR Press
/ to select the desired entry.
and / to select DELETE.
to confirm.
and
/
to select CALL LIST.)
Press
to access the call list.OR Press
and
Press / to select the desired entry.
Press
and / to select DELETE ALL.
Press OK to confirm.
Press OK to re-confirm.
/
to select CALL LIST.
Delete the entire list of the Call List
Telephone settings
1.
2.
3.
4.
5.
View the Details of the Call List Entry
1. Press
to access the call list.OR Press
and / to select CALL LIST Press
DETAILS.
2. Press
and / to select the desired entry.
3. Press
and / to select DETAILS.
4. Press
the date and time of the selected call list entry display.
www.vtech.com
and
/
to select
14
Phonebook
Private Phonebook
• Press
/ to move
through other
phonebook
entries.
Your phone can store up to 20 private phonebook entries with names and numbers. Each phonebook entry
can have a maximum of 20 digits for the phone number and 12 characters for the name. You can also select
different ring tones for your phonebook entries. Phonebook entries are stored alphabetically by name.
Add a New Phonebook Entry
In idle:
1. Press
to access the phonebook,
or
Press
and / to select
main menu item and then press OK to access the phonebook.
2. Press
to select ADD.
3. Press OK to enter the name.
4. Press OK to enter the number.
5. Press OK and / to select the desired ringtone for your phonebook entry.
6. Press OK to store the phonebook entry.
View a Phonebook Entry
In idle:
1. Press
2. Press
3. Press
4. Press
to access the phonebook.
/ to select the desired phonebook entry.
and / to select VIEW.
/
to review the name, number and melody of the selected phonebook entry.
Edit a Phonebook Entry
15
In idle:
1. Press
to access the phonebook.
2. Press / to select the desired phonebook entry.
3. Press
and / to select EDIT.
4. Press
the current contents of the selected phonebook entry displays.
5. Edit the name and press OK.
6. Edit the number and press OK
www.vtech.com
7. Select the ringtone and press <OK> to confirm.
Delete a Phonebook Entry
Telephone settings
In idle:
1. Press
to access the phonebook.
2. Press / to select the desired phonebook entry.
3. Press
and / to select DELETE.
4. Press OK to confirm.
Delete the Entire Private Phonebook
1.
2.
3.
4.
Press
to access the phonebook.
Press
and / to select DELETE ALL.
Press OK to confirm.
Press OK to re-confirm.
Check the Phonebook Usage
You can check how many phonebook entries have been occupied in your phone and how many phonebook
entries are available for you to store in the phonebook.
1. Press
to access the phonebook.
2. Press
and / to select PB STATUS.
3. Press OK to confirm.
www.vtech.com
16
Text and Digit Entry Table
The following tables show you where each letter and punctuation character can be found. Respective
character table will be used when corresponding menu language is selected. This will be helpful when
storing a name in the phonebook and renaming your handset.
In editing mode, a cursor is displayed to indicate the current text entry position. It is positioned at the
right of the last character entered.
Writing Tips:
1. Once a character is selected, the cursor will move to the next position after a short pause.
2. You can move the cursor within the text by / to amend the text entry.
3. Press
to delete the last character.
4. Press and hold
to delete the entire text string.
Particular key characters table:
17
www.vtech.com
Base Settings
Dial Type ( Preset to TONE )
• If the new
PIN entered
in Step 6 is
not matched
with the new
system PIN
Change the system PIN Code
entered in
A 4-digit system PIN code is used for changing the system settings of the base station. It is used to protect your Step.
phone against unauthorized use. The default system PIN code is 0000.
and / to select BS SETTINGS.
1. Press
2. Press OK and / to select CHANGE PIN.
3. Press OK and you are requested to enter the 4-digit system PIN.
4. Enter the old system PIN.
5. Press OK and enter the new system PIN.
6. Press OK and enter the new system PIN again.
7. Press OK to confirm.
Paging (Find the Handset)
• If there is
an incoming
call during
paging, the
phone will
ring with the
incoming call
instead of
paging.
You can locate the handset by pressing
on the base station. All the handsets registered to the base will
on
produce the paging tone and “PAGING…” is displayed on the LCD. You can stop the paging by pressing
on the base again.
any handset or
www.vtech.com
18
Telephone settings
Change the dial mode
1. Press
and / to select BS SETTINGS.
2. Press OK and / to select DIAL MODE.
3. Press OK and / to select TONE or PULSE.
4. Press OK to confirm.
Handset Settings
Alarm Settings
• If ON is
selected, you
will be asked
to set the
alarm time.
You can use this phone to set an alarm clock. When an alarm is set, the
displays on the LCD. When the
alarm time is reached, the
and “ALARM ON” flash on the LCD ringing with the alarm melody for a duration
of 45 seconds. You can press any key to disable the alarm. If snooze function is activated, the alarm will sound
again at the end of the snooze period of seven minutes. You can also press and hold to terminate the snooze
function.
Turn on/off the Alarm
1. Press
and / to select HS settings.
2. Press OK and
/ to select Alarm.
3. Press OK and / to select ON/OFF.
4. Press OK to confirm.
Set the Alarm Time
1 Press
and / to select HS SETTINGS
2 Press OK and / to select ALARM.
3 Press OK and / to select ON/OFF.
4 Press OK to confirm.
5 Enter the alarm time
6 Press OK to set the snooze function.
7 Press OK and /
to select SNOOZE ON or SNOOZE OFF.
8. Press OK to confirm.
Note:
a. Key press is still applicable if handset keypad is locked and when the alarm time is reached.
b. The alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer is set to VOLUME
OFF, the alarm still sounds at VOLUME 1 level.
c. During an external call or internal call, if an alarm is set and when the alarm time is reached, the
and “ALARM ON”
will still flash. An alarm tone will be emitted from the earpiece to notify user the alarm time is reached. Once user
press any key or press and hold
to disable the alarm, it will revert to the call duration screen.
d. During paging or ringing, the alarm will not sound when the alarm time is reached. However, if snooze function is
enabled, the alarm will sound again at the end of the snooze period provided that it’s not ringing or in paging mode
at the end of the snooze period.
19
www.vtech.com
Ringer Setup
Set the Ringer Melody for Internal Calls
1.
2.
3.
4.
Set the Ringer Melody for External Calls
1.
2.
3.
4.
Press
and / to select HS SETTINGS.
Press OK and / to select RING SETUP.
Press OK and / to select EXT RING.
Press OK and / to select the desired ringer melody (a total of 10 melodies for your selection) for
setting ringer melody for external calls.
5. Press OK to confirm.
Set the Ringer Volume
1.
2.
3.
4.
Press
and / to select HS SETTINGS.
Press OK and / to select RING SETUP.
Press OK and / to select RING VOLUME.
Press OK and / to select the desired ringer volume (a total of 6 ringer volume levels including
VOLUME OFF).
If VOLUME OFF is selected, <Ringer Off> icon will display.
5. Press OK to confirm.
www.vtech.com
• The
respective
ringer
melody will
be played
while
browsing the
melody list.
• The
respective
ringer
melody will
be played
while
browsing
the melody
list.
• The
respective
ringer
volume will
be played
during your
selection.
20
Telephone settings
Press
and / to select HS SETTINGS.
Press OK and / to select RING SETUP.
Press OK and / to select INT RING.
Press OK and / to select the desired ringer melody (a total of 10 melodies for your selection) for
setting ringer melody for internal calls.
5. Press OK to confirm.
Tone Setup
A single beep is emitted when you press a key. You can turn on or off the key tone. You can also turn on the
alert tones when low battery and out of range are detected.
Set Key Tone
1.
2.
3.
4.
5.
Press
and / to select HS SETTINGS.
Press OK and / to select TONE SETUP.
Press OK and / to select KEY TONE
Press OK and / to turn on or off these tones.
Press OK to confirm.
1.
2.
3.
4.
5.
Press
and / to select HS SETTINGS.
Press OK and / to select TONE SETUP.
Press OK and / to select BATTERY TONE
Press OK and / to turn on or off these tones.
Press OK to confirm.
1.
2.
3.
4.
5.
Press
and / to select HS SETTINGS.
Press OK and / to select TONE SETUP.
Press OK and / to select OUT OF RANGE
Press OK and / to turn on or off these tones.
Press OK to confirm.
Set Battery Tone
Set Out Of Range Tone
21
www.vtech.com
Set the Handset Language
1.
2.
3.
4.
Press
and / to select HS SETTINGS.
Press OK and / to select LANGUAGE.
Press OK and / to select the desired language.
Press OK to confirm.
1.
2.
3.
4.
Press
and / to select HS SETTINGS.
Press OK and / to select RENAME HS.
Press OK and enter the name of your handset.
Press OK to confirm.
Rename the Handset
Telephone settings
Set Handset Display
You can choose to display time or handset name in your idle screen.
1. Press
and / to select HS SETTINGS.
2. Press OK and / to select HS DISPLAY.
3. Press OK and / to select HANDSET NAME or TIME.
4. Press OK to confirm.
www.vtech.com
22
Set the Auto Answer
• If time has
been set
before, the
current time
will display,
otherwise,
“HH:MM” will
display.
If you turn on the Auto Answer, you can pick up the call from the cradle without pressing any key.
1. Press
and / to select HS SETTINGS.
2. Press OK and / to select AUTO ANSWER.
3. Press OK and / to turn on or off the auto answer feature.
4. Press OK to confirm.
Date and Time Settings
You will need to set the correct time and date so that you know when you received answering machine (applicable
to model with answering machine) or call list entries.
Change the Date Format
1. Press
and / to select HS SETTINGS.
2. Press OK and / to select DATE & TIME.
3. Press OK and / to select DATE FORMAT.
4. Press / to select your desired date format (DD-MM-YY or MM-DD-YY).
5. Press OK to confirm.
Change the Time Format
1. Press
and / to select HS SETTINGS.
2. Press OK and / to select DATE & TIME.
3. Press OK and / to select TIME FORMAT.
4. Press / to select your desired time format (12 HR or 24 HR).
5. Press OK to confirm.
23
www.vtech.com
Set the Time
Set the Date
1. Press
and / to select HS SETTINGS.
2. Press OK and / to select DATE & TIME.
3. Press OK and / to select SET DATE.
4. Press OK to enter the date information. The time entered will be in the format follow the DELETE FORMAT
you set before.
• If date has
been set
before, the
current date
will display,
otherwise,
“DD-MM-YY”
will display.
5. Press OK to confirm.
Reset your Phone
You can reset your phone to the default settings. After reset, all you personal settings and call list entries will
be deleted, but your phonebook remains unchanged.
1. Press
and / to select DEFAULT.
2. Press OK and you are requested to enter the 4-digit system PIN.
3. Enter the 4-digit system PIN.
4. Press OK to confirm.
5. Press OK to re-confirm.
www.vtech.com
24
Telephone settings
1. Press
and / to select HS SETTINGS.
2. Press OK and / to select DATE & TIME.
3. Press OK and / to select SET TIME.
4. Press OK to enter the time information. The time entered will be in the format follow the TIME FORMAT you
set before.
5. Press OK to confirm.
Troubleshooting
If you have difficulty with your phone, please try the suggestions listed below:
Problem
Cause
Solutions
a. The connection cord of the
base station is not plugged in.
b. T h e a d a p t e r c o r d i s n o t
plugged in correctly in the
base station.
c. The line is busy, as another
handset is used.
d. Wrong connection cord (no
Euro AS)
a. Check the connections. Unplug
and plug bac k in the mains.
Check that the telephone line
cord has been plugged into
the base station and the phone
socket.
b. Check the base station power
jack and the adaptor plug
(remove an plug-in).
c. W a i t u n t i l t h e l i n e i s
unoccupied.
d. Use the original connection
cord.
When connect to a PBX, no and/or
wrong connection after dialing.
Dialing prefix is needed.
Insert the dialing prefix
“SEARCHING” is displayed.
a. Base station out of range.
b. Base station not connected
to mains.
Reduce the range.
Connect base station to mains.
The call does not work.
Service not activated or wrong
operator or wrong setting
Check your Subscription with
network or change the dial
mode.
No display.
Empty battery
Recharge battery
No dialing tone when pressing
key
25
Please contact the technical support of the network provider for further information.
This telephone is not equipped with a grounding function! Therefore some of the functions may be limited when
used in PBX systems. For technical support, call VTech Technical Inquiry Hotline Tel: 852-2667 7433.
www.vtech.com
Technical specifications
Stand: DECT
Battery charging time: approx. 16hours
Number of channels: 10
Base station dimensions:
Width / depth / height = 130x101.6x66 mm
Frequency: 1880MHz bis 1900MHz
Range:
up to 300 meters outdoors,
up to 50 metes indoors
Base station power supply:
230V 300mA
Charger station power supply:
230V 200mA
Handsets operationg time:
standby / talk time
approx. 100hrs / approx. 10hrs
Charger station dimensions:
Width / depth / height = 72.6x85.0x44.9 mm
Handset station dimensions:
Width / depth / height = 46.1x29.3x155 mm
Weight of a base: 134.3g (without adaptor)
Weight of a handset: 116.26g (with battery)
Weight of a charger: 40.3g (without adaptor)
Power pack: HongKong
www.vtech.com
26
Customer Service Centre
Suite 1601, Lever Tech Centre, 69-71 King Yip Street,
Kwun Tong, Kowloon, Hong Kong.
Customer Service Hotline: (852) 2666 5558
Technical Inquiry Hotline: (852) 2667 7433