Installation & User manual
Canopy cooker hood
ERHC1238S
ERHC938S
2
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance.
You’ve chosen a product that brings with it decades
of professional experience and innovation. Ingenious
and stylish, it has been designed with you in mind. So
whenever you use it, you can be safe in the knowledge
that you’ll get great results every time.
Welcome to Electrolux.
BEFORE USING YOUR APPLIANCE
Before you use the cooker hood, we recommend that
you read through the relevant sections of this manual,
which provides the description of your appliance and its
functions.
To avoid the risks that are always present when you use
an appliance, it is important that the appliance is installed
correctly and that you read the safety instructions carefully
to avoid misuse and hazards.
We recommend that you keep this instruction booklet for
future reference and pass it on to any future owners.
After unpacking the appliance please check it is not
damaged. If in doubt, do not use the appliance but
contact your local customer care centre.
Conditions of use
This appliance is intended to be used in household and
similar applications such as:
• Staff kitchen areas in shops, offices and other
working environments
• Farm houses
• By clients in hotels, motels and other residential
type environments
• Bed and breakfast type environments.
Important!
Check for any damages or marks
If you find the cooker hood is damaged or marked, you must
report it within 7 days if you wish to claim for damage/marks
under the manufacturer’s warranty. This does not affect your
statutory rights.
Record model and serial
number here:
Model:
Serial No:
Contents
3 Important safety instructions
4 Description of cooker hood 4 Components list
4 Technical specifications
5 Cooker hood dimensions
5 Installation
8 Using the cooker hood
9 Maintaining the cooker hood
10 Troubleshooting
10 Changing the halogen lamps
12 Optional ducting accessories
15 Warranty
LEGEND
Warning!
This symbol indicates information concerning your
personal safety.
Caution!
This symbol indicates information on how to avoid
damaging the cooker hood.
Important!
This symbol indicates tips and information about use of
the cooker hood.
ENVIRONMENT!
This symbol indicates tips and information about
economical and ecological use of the cooker hood.
Information on disposal
for users
ENVIRONMENT!
Most of the packing materials are recyclable. Please dispose
of those materials marked with the recycle symbol
through
your local recycling depot or by placing them
in appropriate collection containers.
If you wish to discard this product, please contact your local
authorities and ask for the correct method of disposal.
3
Important safety instructions
This manual explains the proper use of your new Electrolux
canopy cooker hood. Please read this manual carefully
before using the product. This manual should be kept in a
safe place for handy reference.
This cooker hood is a domestic appliance which has been
manufactured and tested to comply with Australian and
New Zealand Standard AS/NZS 60335.2.31
.
Warning!
Follow these instructions carefully to avoid
an electric shock or fire.
• Y
oung children should be supervised to ensure they
do not play with the cooker hood.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a
person responsible for their safety.
• Ensure the cooker hood is switched off before carrying
out maintenance, to avoid any possibility
of electric shock.
• Never carry out flambé cooking under the canopy
cooker hood.
• The canopy cooker hood can be installed outdoors
but must be protected from the elements
• Grease filters must be removed every four weeks
(maximum) for cleaning to reduce the risk of fire.
• The exhaust from the cooker hood must not be
discharged into any heating flue, which may carry
combustion products from other sources. (Fig. 1)
• Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for the purpose.
• There must be adequate ventilation of the room
when the cooker hood is used at the same time as
appliances burning gas or other fuels.
• Always cover lit gas burners with pots or pans when
cooker hood is in use.
• Always switch off gas burners before you remove
pots or pans.
• Do not leave lit gas burners exposed due to the risk
of fire. (Fig. 2)
Fig. 1
Fig. 2
Warning!
Accessible parts may become hot when
used with cooking appliances.
electrical connection
Check that the mains voltage matches with the voltage on
the data plate inside the canopy cooker hood. Check that
the installation complies with standards of local building,
gas and electrical authorities. Before connecting to the
mains supply ensure that the mains voltage corresponds
to the voltage on the rating plate inside the cooker hood.
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or similarly qualified
person in order to avoid a hazard.
safety warnings – for the installer
When installing the cooker hood, make sure you adhere
to the minimum and maximum distances from the cooker
hood base to the hob or barbecue. surface (as per table in
“Installation” section).
exhaust flue installation
The following rules must be strictly followed to obtain
optimal air extraction.
• Keep exhaust flue short and straight
• Do not reduce the size or restrict exhaust flue.
• Keep bends in the exhaust flue to a minimum.
• When using flexible flue always install duct with helix
pulled taut to minimise pressure loss.
• Failure to observe these basic instructions will
drastically reduce the performance and increase the
noise levels of the cooker hood.
Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for that purpose.
The exhaust from the cooker hood must not be
discharged into any heating flue, which may carry
combustion products from other sources.
NOTE: Exhaust cover is supplied as an optional accessory.
Some installations may require the exhaust cover to be cut
to length. If required, cut with sharp tin snips or a fine-tooth
hack saw blade, taking care not to distort or dent
the exhaust cover.
4
Product description
ERHC1238S
ERHC938S
6
6
5
5
3
3
4
4
1
1
2
2
1
2
3
Main body and fan assemblies
Grease filters
Exhaust transition
4
5
6
Exhaust transition seal
Exhaust transition screw
Damper
Components list
Part
ERHC1238S
ERHC938S
2 fans
1 fan
1
Main body and fan
assemblies
2
Grease filters
4
3
3
Exhaust transition
2
1
4
Exhaust transition seal
2
1
5
Exhaust transition screw
8
4
6
Damper
2
1
NOTE: Dampers not required for outdoor installations
Technical Specification
• P
ower supply: 240 Volts 50 Hz.
Connects to 10A power point
• ERHC938S - 275 Watts,
ERHC1238S - 510 Watts
• Lights:
• 4 x 20 watt, 12 volts halogen (ERHC1238S)
• 3 x 20 watt, 12 volts halogen (ERHC938S)
Additional items required for
installation
• F
ixings required to attach cooker hood body
and anti-tilt points
• Worm drive clamps, Duct tape or cable ties
• Ducting accessories
5
Installation
dimensions
A
B
C
Fig. A
Model
Width
Height
A
Depth
B
Weight
C
ERHC938S
900mm
415mm
580mm
31kg
ERHC1238S
1200mm
415mm
580mm
48kg
Cooker hood Installation
2.Mark the location for the wall mounting points and
anti-tilt fixing points as shown in Fig. B.
3.Install suitable screws for cooker hood mounting
points (to support a total weight of 50kg) to the wall
as marked (Fig. B).
1.Using a spirit level mark a vertical centre line on the
wall where the cooker hood is to be positioned, and a
horizontal line at the hood base position.
NOTE: See table below for the minimum and maximum
height of the underside of cooker hood.
Cooker type
Maximum output
Minimum height*
Maximum
height*
14 kW
600 mm
1200mm
37 mJ
50 mJ
650 mm
1200mm
60 mJ
90 mJ
750 mm
1200mm
ERHC9385
ERHC12385
10.5 kW
Gas hob
Gas BBQ open grill
Electric hob
* If the instructions of the hob specify a greater distance than the minimum above,
then that shall be the minimum height for installation.
6
Cooker hood Installation (cont)
19mm max diameter
9mm max diameter
10
Cooker hood
mounting
point detail
Mounting
screw detail
Screws are to
be tightened
after the hood
is mounted on
the wall
15
4mm
20
C
Mounting
points
Anti-tilt
points
A
B
D4
D3
D1
Min - See table
Max - See table
D2
Top of
cooker
Fig. B
Warning!
Failure to install the screws or fixing device in
accordance with these instructions may result in
electrical hazards.
Model
A
B
C
D1
D2
D3
D4
D5
D6
ERHC938S
366mm
46mm
500mm
750mm
700mm
650mm
600mm
787mm
485mm
ERHC1238S
366mm
46mm
900mm
975mm
925mm
875mm
825mm
1085mm
485mm
7
Cooker hood Installation (cont)
If additional or alternative mounting points are required
there are 4 x M10 threaded mounting points on the top of
the cooker hood as highlighted in the image below.
M10
D6
D5
Fig. C
4.Prior to installing the cooker hood into position,
fix exhaust transition duct using screws supplied,
ensuring the seal is between the cooker hood top
panel and the base of the exhaust transition (Fig. D).
4a. If required, fit the dampers and secure with clamps,
duct tape or cable ties.
Transition pieces
ERHC1238S - 1200mm model
5. Mounting and securing the transition pieces is shown
in Fig. D.
Warning!
Use screws provided to secure transition piece at
preformed holes. Using alternate screws and hole
locations may cause an electricl safety risk.
6. Hang hood on the mounting screws, tighten mounting
screws then secure at the anti-tilt locations as
indicated in Fig. B.
Warning!
Due to product weight, take appropriate measures to
lift and position the product to avoid injury.
Fig. D
Transition piece
screw holes (4 places)
7. The canopy cooker hood has been supplied with duct
transition piece/s, 200mm diameter non-combustible
flue pipe must be used with the transition piece/s.
Continue the centre line to the ceiling. Fit preferred flue
pipe to the fan transition duct (Fig. D1 & D2,
see page 11).
Use worm drive clamps, cable ties or suitable duct tape to
secure flexible pipe to the transition duct.
NOTE: We recommend extending flue pipe through the
roof to external roof cowl to vent exhaust externally.
We do not recommend venting into ceiling cavity.
NOTE: To ensure optimum performance of the cooker
hood, the use of 200 mm diameter rigid ducting is
recommended. The use of bends should be avoided.
Rigid flexible ducting is suitable, although loose flexible
ducting is unacceptable. All ducting must be fire retardant.
electrical connection
Check that the installation complies with the standards
of local building, gas and electrical authorities. Before
connecting to the mains supply ensure that the mains
voltage corresponds to the voltage on the rating plate
inside the cooker hood.
8
Using the Cooker hood
control operation
1
2
1
2
3
4
3
Lock
Speed 1 (minimum)
Speed 2
Speed 3
lock
Press and hold ‘lock’ button for 3 seconds to lock control
interface when cleaning, press and hold for 3 seconds to
unlock control interface.
The lock LED indicator will turn off after 3 minutes. If
a function button is pressed after lock LED indicator
has turned off there will be a “beep” and the Lock LED
indicator will flash for 5 seconds as a reminder that the
lock function is still active.
Speed 1 – suitable for light frying and light barbecuing
Speed 2 – suitable for frying, wok cooking and
barbecuing
Speed 3 – suitable for intensive frying, intensive wok
cooking and barbecuing
Speed 4 – suitable for very smoky cooking and/ or to
clear smoke from an area that has a build up
of smoke
4
5
5
6
7
6
7
Speed 4 (maximum)
Timer off
Lamp
Warning!
IDC
The cooker hood is not intended for continuous
use over barbecues with lit burners, without cooking
Electrolux
Icons M
in progress
proces
Monica Mazioun
Outdoo
timer off
11/11/10
At the end of cooking if the timer is activated, the cooker
hood will continue to run for an additional
5 minutes to
100%
AR
remove any odours that remain at the completion of
This drawing contains confidential information and is the prope
cooking.
without whose permission it may not be copied, shown or hand
be returned promptly upon request to Aktiebolaget Electrolux.
During the 5 minute period the fan speed will gradually
reduce until the canopy turns itself OFF.
Note: If lamps are on when timer function is used, the
lamps will remain on.
When the timer function is activated the “ Timer ” LED
indicator will illuminate and the previously selected fan
speed LED indicator will turn off. To deactivate the timer,
press the timer button again or press a fan speed button
to resume normal operation.
lamp
Press the ‘lamp’ symbol to turn the lamps ON, The first
press will set the lamps to maximum intensity. The second
press will set the lamps to half intensity. The third press will
turn the lamps OFF. Lamps will now be ready to be turned
on again.
9
Maintenance and cleaning
Warning!
Before maintenance or cleaning is carried out,
the canopy cooker hood should be disconnected
from the main power supply. Ensure that the cooker
hood is switched off at the wall socket
and the plug removed.
Warning!
External surfaces are susceptible to scratches and
abrasions, so please follow the cleaning instructions
to ensure the best possible result is achieved without
damage.
inner panels and trough
After each use the inner panels and trough should be
wiped clean with non-abrasive cleaning products to
prevent excessive build up of oils/grease.
Warning!
Beware of edges
Filter
Lockpin
Latch
stainless steel surface
These instructions must be followed to avoid a fire risk.
Clean stainless steel surfaces using non-abrasive cleaning
products that are specifically for use on stainless steel.
To ensure best results also use an even pressure and
follow the grain of the stainless steel. Use of a soft cloth
reduces the risk of scratching. If the cloth is wet ensure
that a dry soft cloth is used to wipe down the surface
again reducing the risk of any surface rust appearing.
cleaning grease filters
The filters can be cleaned by hand or dishwasher. After
cleaning ensure the filters are completely dry before
refitting. Grease filters must be removed every four weeks
(maximum) for cleaning to reduce the risk of fire.
• By hand Soak in warm water and some washing up
liquid. For stubborn grease stains use a soft nylon
brush to help remove these stains.
• In a dishwasher Ensure that placement of the
filters is made so as to not impede the function of
the dishwasher spray arm. Washing the filters in
a dishwasher may cause discolouration over time
although it will not effect their performance.Filters
should be washed separately to crockery and other
kitchen utensils.
Inner filter
Outer filter
Fig.A
removing filters
Bottom
filter
support
panel
Remove filters by pulling down the latch to disengage the
lock pins. (Fig. A)
As lock pins are disengaged pull the filter slightly toward
you and then lift the filter up slightly to clear the bottom
filter support panel. (Fig. B)
Fig. B
removing filter support panels
To remove bottom filter support panel, hold the panel at
each end and lift, then push the panel in. (see arrows in
Fig. C). This will disengage the panel support pins to allow
removal of the panel (Fig. C)
3
2
1
Do
not use the cooker hood without
filters installed.
o not clean the canopy cooker hood with water
D
using a hose or high pressure cleaner.
Bottom filter
support panel
Fig. C
1
Lift
2
Push in
3
Remove
10
Changing the halogen lamps
Warning!
Ensure lamp is cool before removing.
ERHC1238S cooker hood has 4 x 20W, 12 volt
halogen globes
ERHC938S cooker hood has 3 x 20W, 12 volt
halogen globes
Using a small flat blade screw driver remove the inner
stainless steel ring to obtain access to the halogen globe.
When removing the inner ring, do so carefully, as the glass
lense could easily fall out of the inner ring. Remove the
halogen globe, whilst cool, and replace carefully with a
new globe.
Important!
When handling globes hold with a cloth or gloves to
ensure perspiration does not come into contact with
a globe as this can reduce the life of the globe.
Trouble shooting
Troubleshooting guide
Problem
Remedy
The cooker hood will not start
• Check that cooker hood is connected to an electrical supply.
• Check that a fan speed has been selected.
The cooker hood is not working
• Check that fan speed is high enough for the task.
• The grease filters are clean.
• The kitchen is adequately vented to allow entry of fresh air.
• Check ducting and outlets are not blocked.
The cooker hood has switched off during
operation
• The safety device may have tripped – turn off the cooking
appliance and wait for the device to reset. If the hood is
installed below the heights indicated in the installation
instructions the motor will cut out frequently which will damage
the cooker hood.
If you have completed all of the above checks and are still experiencing difficulty, please contact your local
Electrolux Service Centre.
11
Typical Installations showing
accessory applications
Flue cover & flue
cover supports
(optional accessory,
depending
on installation type)
Roof cowl accessory
Some installations may require
a vertical discharge cowl
Flue (extension may be
required, depending on
installation)
Min. 620 mm
Max 1180 mm
Damper* +
Transition*
Fig. D1
Flue (extension
may be required,
depending on
installation)
o
90 Elbow accessory
Wall Vent
Damper* +
Transition*
Rear
Front
Fig. D2
* - supplied with cooker hood as standard equipment
+ - Damper not required for outdoor installations
12
Accessories
1
2
3
5
4
6
1
2
3
4
AR200FJ
AR200E
AR200WV
AR200WC
7
5
6
7
AR200FD
AR200F
AR200RC
Part numbers
Description
AR200RC
200mm Roof cowl
AR200F
200mm Flue (length 1200mm)
AR200WV
200mm Wall vent
AR200E
200mm 90° Elbow
AR200FD
200mm semi rigid flexible flue (0.7m min & 3.0m max length)
AR200FJ
200mm Flue joiner
AR200WC
200mm worm drive clamp
AR209FS
Stainless flue cover to suit 900mm model (Min height 620mm Max height
1180mm)
AR212FS
Stainless flue cover to suit 1200mm model (Min height 620mm Max height
1180mm)
Note : Accessories are to be purchased separately.
13
NOTES
14
NOTES
15
Warranty
FOR SALES IN AUSTRALIA AND NEW ZEALAND
APPLIANCE: RANGEHOOD
This document sets out the terms and conditions of the product
warranties for Electrolux Appliances. It is an important document.
Please keep it with your proof of purchase documents in a safe place for
future reference should you require service for your Appliance.
1. In this warranty
(a) ‘acceptable quality’ as referred to in clause 10 of this warranty has the
same meaning referred to in the ACL;
(b) ‘ACL’ means Trade Practices Amendment (Australian Consumer
Law) Act (No.2) 2010;
(c) ‘Appliance’ means any Electrolux product purchased by you
accompanied by this document;
‘major failure’ as referred to in clause 10 of this warranty has the same
meaning referred to in the ACL and includes a situation when an
Appliance cannot be repaired or it is uneconomic for Electrolux, at its
discretion, to repair an Appliance during the Warranty Period;
(g) ‘Warranty Period’ means:
where the Appliance is used for personal, domestic or household
use (i.e. normal single family use) as set out in the instruction
manual, the Appliance is warranted against manufacturing defects
in Australia for 24 months and in New Zealand for 24 months,
following the date of original purchase of the Appliance;
(ii) where the Appliance is used for commercial purposes (including
being used to directly assist a business or where the Appliance is
used in a multi-family communal or share type environment), the
Appliance will then be warranted against manufacturing defects in
Australia for 3 months and in New Zealand for 3 months, following
the date of original purchase of the Appliance.
(h) ‘you’ means the purchaser of the Appliance not having purchased the
Appliance for re-sale, and ‘your’ has a corresponding meaning.
2.
You may not make a claim under this warranty unless the defect claimed
is due to faulty or defective parts or workmanship. Electrolux is not liable in
the following situations (which are not exhaustive):
(a) the Appliance is damaged by:
(i)
accident
(ii) misuse or abuse, including failure to properly maintain or service
(iii) normal wear and tear
(v) incomplete or improper installation
(e) ‘Electrolux’ means Electrolux Home Products Pty Ltd of 163
O’Riordan Street, Mascot, NSW 2020, ABN 51 004 762 341 in respect
of Appliances purchased in Australia and Electrolux (NZ) Limited of 3-5
Niall Burgess Road, Mount Wellington, in respect
of Appliances purchased in New Zealand;
(i)
7.
(iv) power surges, electrical storm damage or incorrect power supply
(d) ‘ASC’ means Electrolux’ authorised service centres;
(f)
6. Proof of purchase is required before you can make a claim under
this warranty.
This warranty only applies to Appliances purchased and used in Australia
or New Zealand and is in addition to (and does not exclude, restrict, or
modify in any way) any non-excludable statutory warranties in Australia or
New Zealand.
3. During the Warranty Period Electrolux or its ASC will, at no extra charge
if your Appliance is readily accessible for service, without special
equipment and subject to these terms and conditions, repair or replace
any parts which it considers to be defective. Electrolux or its ASC may use
remanufactured parts to repair your Appliance. You agree that any replaced
Appliances or parts become the property of Electrolux. This warranty does
not apply to light globes, batteries, filters or similar perishable parts.
4. Parts and Appliances not supplied by Electrolux are not covered by
this warranty.
5. You will bear the cost of transportation, travel and delivery of the Appliance
to and from Electrolux or its ASC. If you reside outside of the service area,
you will bear the cost of:
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation
(viii) failure to comply with any additional instructions supplied with the
Appliance;
(b) the Appliance is modified without authority from Electrolux in writing;
(c) the Appliance’s serial number or warranty seal has been removed
or defaced;
(d) the Appliance was serviced or repaired by anyone other than
Electrolux, an authorised repairer or ASC.
8. This warranty, the contract to which it relates and the relationship between
you and Electrolux are governed by the law applicable where the Appliance
was purchased. Where the Appliance was purchased in New Zealand for
business purposes the Consumer Guarantee Act does not apply.
9. To the extent permitted by law, Electrolux excludes all warranties and
liabilities (other than as contained in this document) including liability for
any loss or damage whether direct or indirect arising from your purchase,
use or non use of the Appliance.
10. For Appliances and services provided by Electrolux in Australia,
the Appliances come with a guarantee by Electrolux that cannot be
excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any
other reasonably foreseeable loss or damage. You are also entitled to
have the Appliance repaired or replaced if the Appliance fails to be of
acceptable quality and the failure does not amount to a major failure.
The benefits to you given by this warranty are in addition to your other
rights and remedies under a law in relation to the Appliances or services
to which the warranty relates.
11. At all times during the Warranty Period, Electrolux shall, at its discretion,
determine whether repair, replacement or refund will apply if an Appliance
has a valid warranty claim applicable to it.
12. For Appliances and services provided by Electrolux in New Zealand, the
Appliances come with a guarantee by Electrolux pursuant to the provisions
of the Consumer Guarantees Act, the Sale of Goods Act and the Fair
Trading Act.
13. To enquire about claiming under this warranty, please follow these steps:
(a) carefully check the operating instructions, user manual and the terms
of this warranty;
(b) have the model and serial number of the Appliance available;
(c) have the proof of purchase (e.g. an invoice) available;
(a) travel of an authorised representative;
(d) telephone the numbers shown below.
(b) transportation and delivery of the Appliance to and from
Electrolux or its ASC,
In all instances, unless the Appliance is transported by Electrolux or an
Electrolux authorised representative, the Appliance is transported at the
owner’s cost and risk while in transit to and from Electrolux or its ASC.
14. You accept that if you make a warranty claim, Electrolux and its ASC may
exchange information in relation to you to enable Electrolux to meet its
obligations under this warranty.
Important Notice
Before calling for service, please ensure that the steps listed in point 13 above have been followed.
FOR SERVICE
or to find the address of your nearest
state service centre in Australia
PlEASE CAll 13 13 49
For the cost of a local call (Australia only)
FOR SERVICE
or to find the address of your nearest
authorised service centre in New Zealand
FREE CAll 0800 10 66 10
(New Zealand only)
GRH_Warr_Apr11
SERVICE AUSTRAlIA
ELECTROLUX HOME PRODUCTS
www.electrolux.com.au
SERVICE NEW ZEAlAND
ELECTROLUX HOME PRODUCTS
www.electrolux.co.nz
FOR SPARE PARTS
or to find the address of your nearest
state spare parts centre in Australia
PlEASE CAll 13 13 50
For the cost of a local call (Australia only)
FOR SPARE PARTS
or to find the address of your nearest
state spare parts centre in New Zealand
FREE CAll 0800 10 66 20
(New Zealand only)
Electrolux Home Products Australia
telephone: 1300 363 640
fax:
1800 350 067
email:customercare@electrolux.com.au
web:www.electrolux.com.au
Electrolux Home Products New Zealand
telephone: 09 573 2384
fax:
09 573 2221
email:customercare@electrolux.co.nz
web:www.electrolux.co.nz
The Thoughtful Design Innovator.
Do you remember the last time you opened a gift that made you say
“Oh! How did you know? That’s exactly what I wanted!” That’s the kind
of feeling that the designers at Electrolux seek to evoke in everyone who
chooses or uses one of our products. We devote time, knowledge, and
a great deal of thought to anticipating and creating the kind of appliances
that our customers really need and want.
This kind of thoughtful care means innovating with insight. Not design for design’s
sake, but design for the user’s sake. For us, thoughtful design means making
appliances easier to use and tasks more enjoyable to perform, freeing our
customers to experience that ultimate 21st century luxury, ease of mind. Our aim
is to make this ease of mind more available to more people in more parts of their
everyday lives, all over the world. So when we say we’re thinking
of you, you know we mean just that.
The “Thinking of you” promise from Electrolux goes beyond meeting the needs of
today’s consumers. It also means we’re committed to making appliances safe for
the environment—now and for future generations.
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com.au or www.electrolux.co.nz
P/No. 305469303
Issue: C
© 2013 Electrolux Home Products Pty Ltd.
ABN 51 004 762 341
EMAN_PROLINE_RH_Jun13