Vizio E320-B1 Operating instructions

VIZIO
QUICK START GUIDE
Model: E320-B1
IMPORTANT SAFETY INSTRUCTIONS
Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric
shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the
installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV.
Keep these instructions in a safe place for future reference.
• To reduce the risk of electric shock or component damage, switch off the power before connecting other
components to your TV.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally or has been dropped.
• Unplug the power cord before cleaning your TV.
• When moving your TV from an area of low temperature to an area of high temperature, condensation may
form in the housing. Wait before turning on your TV to avoid causing fire, electric shock, or component
damage.
• A distance of at least three feet should be maintained between your TV and any heat source, such as a
radiator, heater, oven, amplifier etc. Do not install your TV close to smoke. Operating your TV close to smoke
or moisture may cause fire or electric shock.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable
operation of your TV and to protect it from overheating, be sure these openings are not blocked or covered.
Do not place your TV in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slots and openings on your TV cabinet. Do not place any objects on the top
of your TV. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your TV.
• Your TV should be operated only from the type of power source indicated on the label. If you are not sure of
the type of power supplied to your home, consult your dealer or local power company.
• Do not apply pressure or throw objects at your TV. This may compromise the integrity of the display. The
manufacturer’s warranty does not cover user abuse or improper installations.
• The power cord must be replaced when using different voltage than the voltage specified. For more
information, contact your dealer.
• When connected to a power outlet, power is always flowing into your TV. To totally disconnect power, unplug
the power cord.
• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of un-isolated, dangerous voltage within the inside of your TV that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket should be installed near your TV and easily accessible.
• Only power of the marked voltage can be used for your TV. Any other voltage than the specified voltage
may cause fire or electric shock.
• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord
during electrical storms.
• Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect
your TV from damage due to power surges.
• Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you
to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all
servicing to qualified service personnel.
• WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates
into your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in fire
or electric shock.
• Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power
cord and contact your dealer immediately. Do not try to repair your TV yourself.
• Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the
internal components may function abnormally. Unplug the power cord immediately and contact your
dealer for repair. Continued use of your TV may cause fire or electric shock.
• Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments with
heavy dust or high humidity may cause fire or electric shock.
• Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged
before moving your TV.
• When unplugging your TV, hold the AC/DC power adapter, not the cord. Pulling on the power cord may
damage the wires inside the cord and cause fire or electric shock. When your TV will not be used for an
extended period of time, unplug the power cord.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which
can damage the remote control or injure the operator. Do not expose batteries to excessive heat such as
sunshine, fire or the like.
• If any of the following occurs, contact the dealer:
- The power cord fails or frays.
- Liquid sprays or any object drops into your TV.
- Your TV is exposed to rain or other moisture.
- Your TV is dropped or damaged in any way.
- The performance of your TV changes substantially.
• This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
• The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
• CAUTION - These servicing instructions are for use by qualified service personnel only. To reduce the risk
of electric shock, do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of electrical shock to persons.
h
This product qualifies for ENERGY STAR in the “factory default” setting and
this is the setting in which power savings will be achieved. Changing the
factory default picture settings or enabling other features will increase
power consumption that could exceed the limits necessary to qualify for
ENERGY STAR rating.
TELEVISION ANTENNA CONNECTION PROTECTION
Ground Clamp
Antenna Lead In Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Electric Service Equipment
• If an outside antenna/satellite dish or cable system is to be connected to
the TV, make sure that the antenna or cable system is electrically grounded
to provide some protection against voltage surges and static charges.
• Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides
information with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit,
size of the grounding conductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements of the grounding
electrode.
Power Service Grounding Electrode System
(NEC ART 250, part H)
• Lightning Protection: For added protection of the TV during a lightning
storm or when it is left unattended or unused for long periods of time,
unplug the TV from the wall outlet and disconnect the antenna or cable
system.
• Power Lines: Do not locate the antenna near overhead light or power
circuits, or where it could fall into such power lines or circuits. Remember,
the screen of the coaxial cable is intended to be connected to earth in the
building installation.
Do You Have Questions? Find Answers At
SUPPORT.VIZIO.COM
Find help with:
• New Product Setup
• Connecting Your Devices
• Technical Problems
• Product Updates
• And More
Live Chat
Support Available
Your can also contact our
award-winning support team at:
Phone: (877) 878-4946 (TOLL-FREE)
Email: techsupport@VIZIO.com
Hours Of Operation: Monday - Friday: 5 am to 8 pm (PST)
Saturday - Sunday: 7 am to 4 pm (PST)
DOWNLOAD THE FULL USER MANUAL
1
2
Page shown is for illustrative purposes only. Actual page content will vary.
Help VIZIO reduce paper waste.
Download the Full User Manual for your TV.
Using a computer, navigate to:
http://store.VIZIO.com/support
Enter the model number of the TV in the
space above.
You can download the Full User Manual under the
Product Downloads section of the Support tab.
PACKAGE CONTENTS
INPUT
MENU
EXIT
OK
BACK
GUIDE
CH
VOL
CH
VOL
1
2
4
5
7
8
9
WIDE
0
—
3
6
VIZIO LED HDTV with Stand
Remote Control
with Batteries
This Quick Start Guide
Power Cord
3 x T4 16mm
Phillips Screws
3 x M4 12mm
Phillips Screws
USING THE REMOTE
INPUT
Change the currently-displayed input.
EXIT
Close the on-screen menu.
INPUT
VOLUME UP/DOWN
Increase or decrease loudness of
the audio.
MUTE
Turn the audio off or on.
NUMBER PAD
Manually enter a channel.
WIDE
Change the display mode.
MENU
EXIT
OK
Select the highlighted menu option.
BACK
Go to the previous on-screen menu.
POWER
Turn TV on or off.
MENU
Display the on-screen menu.
ARROW
Navigate the on-screen menu.
OK
BACK
GUIDE
VOL
CH
VOL
CH
1
2
3
4
5
6
7
8
9
WIDE
0
—
GUIDE
Display the info window.
V BUTTON
Open the USB media player.
CHANNEL UP/DOWN
Change the channel.
LAST
Return to the channel last viewed.
DASH
Use with the number pad
to manually enter a digital
sub-channel.
(For example, 18-4 or 18-5.)
INSTALLING THE BASE
1
Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to
the screen, place the TV on a soft surface such as a blanket.
2
Align the neck piece with the bottom of the TV
and slide it into place as shown.
Using a Phillips screwdriver, tighten
the three (3) M4 12mm screws into the center
of the neck piece to secure it to the TV.
3
Align the base with the neck and
tighten the three (3) T4 16mm screws
using a Phillips screwdriver.
Place the TV on a flat, stable surface.
CONNECTING
CONNECTING YOUR
YOUR DEVICES
DEVICES
1
Connect all of your devices first.
Choose ONE connection type for each device.
BACK OF TV
White
Red
Red
Red
Blue
White
Yellow
Green
Match colored connectors
to colored ports.
HDMI CABLE*
• DIGITAL
• HD VIDEO (1080p)**
• HD AUDIO
BEST
Commonly-Connected
Devices:
COMPONENT CABLE* • ANALOG
BETTER
• HD VIDEO (1080i)**
• STEREO AUDIO
Cable or Satellite Boxes
Match colored connectors to colored ports.
COAXIAL CABLE*
BETTER
AV CABLE*
GOOD
• ANALOG
• HD VIDEO (1080i)**
• STEREO AUDIO
• ANALOG
• VIDEO (480i)**
• STEREO AUDIO
Match colored connectors to colored ports.
* Cables are not included
** Maximum Resolution
Blu-ray™ or DVD Players
Game Consoles
3
2
Remove the battery cover by pressing gently on
the V logo and sliding away from the remote.
Insert the included batteries.
Gently slide the battery cover back into place.
Connect the power cord to the back of the TV.
The flat edge of the connector goes toward the
outside of the TV.
Plug the power cord into an electrical outlet.
4
5
Turn the TV on by pressing the
Power button on the remote.
The Setup App is displayed.
Use the Arrow buttons on the remote to
highlight Home Use and press OK.
Follow the on-screen instructions to complete
the first-time setup.
HELP TOPICS
How do I return to the
Setup App?
• The on-screen menu has guided setup. Press MENU > Guided Setup. Select
the type of setup you need and press OK. The Setup App begins.
• To reset the TV to factory defaults, press MENU > System > Reset & Admin >
Reset TV to Factory Defaults. If you set a Parental Control Passcode, enter it
now. Select Reset. Remember that all of your settings will be lost.
There is a picture, but
there is no sound.
•
•
•
Press the VOLUME UP button on the remote.
Press the MUTE button on the remote to ensure that mute is off.
Press MENU, then select Audio. Be sure TV Speakers is set to On.
•
•
Be sure your connected devices are turned on.
Press the INPUT button on the remote and select the input to which your device is
connected (TV, HDMI-1, COMP, etc.).
•
•
Note that some television channels add black bars to the picture.
Set the TV image mode so that the picture fills the screen. Press the WIDE button on
the remote until the screen is filled, and then press OK.
Adjust the video settings of your external device.
The TV displays
“No Signal.”
There are black/
gray bars on the top/
bottom/sides of the
screen.
•
•
There is no power.
•
•
Be sure the power cord is securely connected to the AC socket on the TV and to a
working electrical outlet.
Press the POWER button on the remote.
If the above steps do not work, try plugging the power cord into a different outlet.
LEGAL / COMPLIANCE
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Notice
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this
equipment. It is the responsibilities of the user to correct such interference.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules
could void the user’s authority to operate this equipment.
Caution
Always use an AC/DC power adapter that is properly grounded. Use the AC cords listed below for
each area.
USA: UL
Germany: VDE
Canada: CSA
UK: BASE/BS
Japan: Electric Appliance Control Act
Image(s) under license from Shutterstock.com.
LIMITED WARRANTY
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only.
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship
for a period of one (1) year of non-commercial usage and ninety (90) days of commercial use. If a Product covered
by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the
Product at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via e-mail: TechSupport@VIZIO.com or via phone at
877 MY VIZIO (877.698.4946) from 5:00AM to 8:00PM Monday through Friday and 7:00AM to 4:00PM Saturday and
Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT
TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show
that a Product is within the warranty period.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE
LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES
AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE,
OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR
DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO
STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.
Parts and Labor
Personal Data
There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new
or recertified at VIZIO’s option and sole discretion. Replacement parts and Products are warranted for the remaining
portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
If your VIZIO product is capable of storing personal data and other information, ALL CONTENTS AND INFORMATION
WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product
will be restored to you configured as originally purchased. You will be responsible for restoring all applicable data
and passwords. Recovery and reinstallation of user data is not covered under this Limited Warranty. In order to
protect your personal information, VIZIO recommends that you always clear all personal information from the unit
before it is serviced, regardless of the servicer.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for
transportation costs to the service center, but VIZIO will cover return shipping to the customer. PRE-AUTHORIZATION IS
REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or
packaging that affords an equal degree of protection. VIZIO Technical Support will provide instructions for packing
and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for
example: cosmetic damage, normal wear and tear, improper operation, improper voltage supply or power surges,
signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as
well as installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service
center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered.
This one year limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized
reseller.
Zero Bright Pixel Defect Guarantee
This policy covers “zero bright pixel” defects for the duration of the limited “ONE YEAR WARRANTY” on select new
product purchases. To determine if this guarantee applies to your product, refer to the “DETAILS” tab of the model’s
product information page (www.VIZIO.com) or look for the “zero bright pixel” guarantee on the box.
© 2014 VIZIO INC. ALL RIGHTS RESERVED.
140131OC-NC