DGS-1100 Series Firmware Release Notes

DGS-1100 Series Firmware Release Notes
DGS-1100-05 Firmware Version: 1.10.002
DGS-1100-05 PROM Code Version: 1.0.4
DGS-1100-08 Firmware Version:: 1.10.007
DGS-1100-08 PROM Code Version:: 1.0.11
DGS-1100-16/24 Firmware Version:: 1.10.008
DGS-1100-16/24 PROM Code Version: 1.0.2
Published: Oct. 4, 2012
These release notes include important information about D-Link switch firmware revisions. Please
verify that these release notes are correct for your switch:
-
If you are installing a new switch, please check the hardware version on the device label;
make sure that your switch meets the system requirement of this firmware version. Please
refer to Revision History and System Requirement for detailed firmware and hardware
matrix.
-
If the switch is powered on, you can check the hardware version by checking the device
information page on the web graphic user interface.
-
If you plan to upgrade to the new firmware release, please refer to the Upgrade Instructions
for the correct firmware upgrade procedure.
For more detailed information regarding our switch products, please refer to Related
Documentation.
You can also download the switch firmware and technical documentation from
http://tsd.dlink.com.tw.
Content:
Revision History and System Requirement: ....................................................................................2
Upgrade Instructions: ............................................................................................................2
Upgrade using Web-UI ................................................................................................................................................ 2
Upgrade using SmartConsole Utility ........................................................................................................................... 3
New Features: ....................................................................................................................6
Problem Fixed: ...................................................................................................................6
Known Issues: ....................................................................................................................6
Related Documentation: ........................................................................................................7
1
DGS-1100 Series Firmware Release Notes
Revision History and System Requirement:
Firmware Version
Date
Model
Hardware Version
DGS-1100-05
A1
DGS-1100-08
A1
Runtime:V1.10.008
PROM:1.0.2
DGS-1100-16
DGS-1100-24
A1
Runtime:V1.10.005
PROM:1.0.2
DGS-1100-16
DGS-1100-24
A1
DGS-1100-16
DGS-1100-24
A1
DGS-1100-08
A1
DGS-1100-16
DGS-1100-24
A1
Runtime:V1.10.002
PROM:1.0.4
Runtime:V1.10.007
PROM:1.0.11
Runtime:V1.00.012
PROM:1.0.2
4-Oct-2012
2-Jun-2012
Runtime:V1.10.002
PROM:1.0.8
v1.00.009
27-Dec-2010
Upgrade Instructions:
You can download the firmware from D-Link web site http://tsd.dlink.com.tw, and upgrade
through web UI or SmartConsole Utility.
Upgrade using Web-UI
1. Connect a workstation installed with java SE runtime environment to any switch port of the
device.
2.
Open the web browser from the workstation and enter the IP address of the switch. The
switch’s default IP address is 10.90.90.90.
3.
Enter administrator’s password when prompted. The password is admin by default.
4.
To update switch's firmware or configuration file, select Tools > Firmware Backup &
Upgrade from the banner.
5.
Click Browse to browse your inventories for a saved firmware file, and then click Upgrade
2
DGS-1100 Series Firmware Release Notes
after selecting the firmware file you want to restore.
6.
Wait until the “Firmware Upgrade Successful” message pops up and login again after device
boots up.
Upgrade using SmartConsole Utility
1. Connect a workstation installed with java SE runtime environment to any switch port of the
device
2. Execute SmartConsole Utility and click the “Discovery” button to search switches.
3
DGS-1100 Series Firmware Release Notes
3. Single-click on the icon of Monitor column to select the target switch.
4. Click Firmware Upgrade button
5. Click Browse button and select the firmware file (Model name_HW ver._FW ver. .hex) on your
local hard drive.
4
DGS-1100 Series Firmware Release Notes
6. Enter password and click “Upgrade” button to start firmware upgrade. The default password is
“admin”.
7. Once the message popped up, click “OK” button to complete the firmware upgrade
5
DGS-1100 Series Firmware Release Notes
New Features:
DGS-1100-05:
Firmware Version
V1.10.002
New Features
First Release
DGS-1100-08:
Firmware Version
V1.10.007
New Features
1. SmartConsole Utility v3.0
V1.10.002
DGS-1100-16/24:
Firmware Version
V1.10.008
V1.10.005
V1.00.009
First Release
New Features
1. SmartConsole Utility v3.0
1. Management VLAN
2. Voice VLAN
First Release
Problem Fixed:
DGS-1100-05:
Firmware
Problems Fixed
Version
V1.10.002
First Release
DGS-1100-08:
Firmware
Problems Fixed
Version
V1.10.002
First Release
DGS-1100-16/24:
Firmware
Problems Fixed
Version
V1.10.005
V1.00.012
V1.00.009
NA
Fix the configuration lost when FW upgrades from V1.00.009 to V1.10.005.
Note: This Firmware will NOT cut in to production.
First Release
Known Issues:
Firmware Version
V1.10.005
(For DGS-1100-16/24)
Issues
When firmware V1.00.009 is
upgraded to V1.10.005, the
configuration will be lost.
6
Workaround
Firmware V1.00.009 should be
upgraded to V1.00.012 first, and
then upgraded to V1.10.005.
DGS-1100 Series Firmware Release Notes
V1.00.012 can be downloaded
from http://tsd.dlink.com.tw/
V1.10.002
(For DGS-1100-08)
NA
V1.00.009
(For DGS-1100-16/24)
First Release
Related Documentation:
-
DGS-1100 Series User Manual
DGS-1100 Series Getting Started Guide
7