Mitsubishi Electric PUHY-RP600 Specifications

MITSUBISHI ELECTRIC MULTIPLE SPLIT TYPE AIR CONDITIONERS
Series
CITY MULTI
Eco Changes is the Mitsubishi Electric Group’s environmental statement,
and expresses the Group’s stance on environmental management.
Through a wide range of businesses, we are helping contribute to the
realization of a sustainable society.
The Air Conditioning & Refrigeration Systems Works acquired ISO 9001 certification under Series
9000 of the International Standard Organization (ISO) based on a review of Quality management for
the production of refrigeration and air conditioning equipment.
ISO Authorization System
The ISO 9000 series is a plant authorization system relating to quality management as stipulated by
the ISO. ISO 9001 certifies quality management based on the "design, development, production,
installation and auxiliary services" for products built at an authorized plant.
FM33568 / ISO 9001;2008
The Air Conditioning & Refrigeration Systems Works acquired environmental management system
standard ISO 14001 certification.
The ISO 14000 series is a set of standards applying to environmental protection set by the
International Standard Organization (ISO).
Registered on March 10, 1998.
Warning
■ Do not use refrigerant other than the type indicated in the manuals provided with the unit and on the nameplate.
- Doing so may cause the unit or pipes to burst, or result in explosion or fire during use, during repair, or at the time of disposal of the
unit.
- It may also be in violation of applicable laws.
- MITSUBISHI ELECTRIC CORPORATION cannot be held responsible for malfunctions or accidents resulting from the use of the wrong
type of refrigerant.
http://Global.MitsubishiElectric.com
CM13AS-L
MEE13K031
New publication effective Feb. 2014
Specifications subject to change without notice
Air conditioning is an ideal way of controlling the temperature, movement and
cleanliness of air inside any building, large or small. With today's buildings being so
well insulated and increasingly full of electronic equipment, the need for effective
climate control is greater than ever. Not only does it cool in the summer months, but
air conditioning can also heat, doing away with the need for separate heating systems
altogether. More and more people today are enjoying the benefits of comfortable
working and living environments made possible with air conditioning.
Unsurpassed air conditioning
from Mitsubishi Electric
Known the world over, Mitsubishi
Our Latest Technologies
Electric is a trusted household name
associated with a variety of products
V RF system
VRF stands for Variable Refrigerant Flow.
A VRF air conditioning system modulates the
flow of refrigerant depending upon the capacity
requirements of the building. In its simplest
form, a VRF system comprises an air-cooled
outdoor unit and a series of indoor units that
regulate the air temperature inside an internal
space.
I
nverter driven technology
At Mitsubishi Electric we strive to continually
meet the increasing demands of our customers,
being the first in the industry to offer highly
advanced ‘inverter driven’ systems. Using
inverter technology our systems produce just
the right amount of output to match the exact
requirement of any building. These systems
work so efficiently that they don’t waste
valuable
energy
by
over-heating
or
over-cooling, resulting in greatly reduced
running costs. Alternative systems that may
appear cheaper, can often cost substantially
more to run, making us the most cost effective
choice all round.
Page 1
I
ntelligent Power Module (IPM)
technology
The CITY MULTI range from Mitsubishi Electric
provides precise control of energy input,
through utilization of its Intelligent Power
Module (IPM) technology. By employing this
technology, highly efficient operation is possible
with compact units closely matching building
requirements.
and services. Founded in 1920, the
Contents
Features of Mitsubishi Electric
air conditioners
Outdoor unit
Page 1-12
Page 14-91
company known today as Mitsubishi
Indoor unit
Electric, quickly rose to the forefront of
Remote Controller
Page 133-155
the air conditioning industry - a
Optional parts
Page 156-159
position we still enjoy today. We pride
Installation information
Page 160-166
ourselves on offering some of the
Maintenance equipment
R 410A refrigerant
most
energy
efficient
As scientific evidence points to man-made
chemicals for the damage caused to the ozone
layer, we only use chlorine-free refrigerants
that are safe with zero ODP (Ozone Depletion
Potential). Accordingly, our systems require
less energy to run, and have a significantly
lower indirect global warming potential. In
short, we produce the most efficient equipment
possible, while helping to protect the environment.
available on the market.
Page 92-132
Page 167
systems
Page 2
The New
Cooling-only Models
Energy saving
Compressor
•Improved efficiency by the
use of DC brushless motor.
maximum capacity of 54 HP*. Different patterns of combinations of basic modules provide either standard or high COP.
*Applicable to standard model combinations only
New
compressor
Crankcase
heater
New features
Requires
joint work
Single module up 20 HP
S
Capable of covering up to 20 HP with a
single module and a single compressor.
Reduced piping work.
10HP
10HP
No need for
joint work
Field-installed
High
•Improved partial-load characteristics achieved by the
optimized scroll shape.
Heated
compressor
motor
Compression ratio
Unit casing
Current Old bellmouth-shaped hood
•Improved static pressure at the exhaust
air outlet that allows
for a reduction in fan
input power by the
changed shape of the bellmouth hood.
New New bellmouth-shaped hood
Capable of running cooling operations
in the outdoor temperature of up to 52ºC*.
*Compared to 46ºC of the older model
IIncrease in the limit of piping length
gth
All modules feature
A
iinverter-driven
compressors.
Maximum combined
horse power: 60 HP
*56-, 58-, and 60-HP models will be available
in December 2014.
Farthest indoor from first branch: 90 m
Height difference between indoor and indoor units
is up to 30 m.
Low
•ET control (Evaporating Temperature control)
Reduced energy consumption in cooling by controlling the refrigerant temperature according to
the operation load and raising evaporating temperature.
Temperature
Current control method
Intermediate value
between thermostat
ON and OFF
Room
temperature
Evaporating temperature was kept
constant.
Max length
90m*3
New control method
Pressure
Thermostat
ON
30m *2
Thermostat
OFF
Evaporating temp. UP
Target evaporation
temperature
Time
S
HP
example : 30HP
L
8 10 12
14 16 18
+
S
20
L
COP
+
S
S
+
L
COP
3.33
3.88
Standard
model
HighCOP
model
12
Page 3
XL
+
18
=
30
Improved total efficiency of motor and inverter with the use of our original PWM overmodulation
control, increasing the output voltage during high-load operation (when the motor is rotating at
high speed).
+
8
+
14
=
30
*1 : Any continuous operation over 46ºC may require an increased frequency of maintenance.
*2 : When the height difference is 15m or greater, use the one size larger liquid pipe between the indoor unit and the indoor unit.
*3 : When the piping length is 40m or longer, use the one size larger liquid pipe between the indoor unit and the first branch.
Increased output
voltage due to
overmodulation
Output voltage
Improved efficiency
due to increased
output voltage
Motor efficiency
Overmodulation zone
f1
8
Evaporating temperature is raised
according to the operation load,
decreasing compressor input power
and increasing operation efficiency.
•Original PWM overmodulation control
Motor efficiency/Output voltage
Standard or high COP options are
S
available by different combinations of
a
modules.
Low
The new bellmouth-shaped
hood achieves reduction in
fan rotation and increases
the pressure at the hood
outlet compared to that of the
old one, resulting in reduced
input power to the fan.
Control
First Branch
Max height
High
Static pressure
New
Current
High
•Reduced standby power consumption by heating the compressor instead of a
crankcase heater. (16/18/20 HP)
Static pressure
Compatibility to outdoor
C
ttemperature of up to 52ºC *1
2
Old YHA model
Low
High
52ºC
1
SEER conditions
20HP
Field-installed
New YKA model
Compressor efficiency
Mitsubishi Electric offers a wide lineup of new cooling-only models with the
Improved SEER performance
Optimized scroll shape (improved volumetric capacity ratio)
Rotational frequency [s-1 ]
f2
Overmodulation method
Conventional method
Page 4
V RF system
Our answer to VRF
Mitsubishi Electric sets the boundaries of VRF technology with the CITY MULTI range, which is available using
R410A refrigerant with zero ODP (Ozone Depletion Potential). The range has been specifically designed for
today’s building requirements and addresses key market issues such as energy efficiency, adaptability and
reliability. With user friendly control systems utilizing internet technology and integrated cooling and ventilation
indoor units, CITY MULTI is the benchmark and market leader in VRF technology.
VRF is a multi and direct expansion type air conditioning system where by one outdoor unit can be connected with
multiples indoor units. The amount of refrigerant can be regulated freely according to the load on the indoor unit by
the inverter driven compressor in the outdoor unit. Zoning in a small office is possible with a small capacity indoor
unit. Energy conservation is easily handled because individual indoor units can stop and start their operation as
needed. There are various indoor units available in order to suit various interior design needs.
Inverter driven compressor
Sophisticated
yet simple technology
Outdoor unit
Joint
Header
Reliable
Designed and manufactured to the highest standards, the
CITY MULTI range offers one of the most reliable air
conditioning systems available. Simple to install and easy to
maintain, this range provides ideal solutions you can trust to
protect your investment.
Indoor unit
OFF
PEFY-VMS1
ON 27°c
ON 25°c
ON 25°c
ON 26°c
OFF
ON 23°c
Controller
PEFY-VMR
>All the CITY MULTI outdoor units are made under stringent control.
Page 5
PFFY-VKM
Page 6
I nverter Driven Compressor
Technology
gy - now up to 54HP
Low
Starting
Currents
Using inverter driven technology
saves energy for several reasons:
The compressor varies its speed to match the indoor cooling or heating demand and therefore only consumes the
energy that is required.
When an inverter driven system is operating at partial load, the energy
efficiency of the system is significantly higher than that of a standard fixed
speed, non inverter system.
The fixed speed system can only operate at 100%, however, partial load
conditions prevail for the majority of the time. Therefore fixed speed
systems cannot match the annual efficiencies of inverter driven systems.
Cooling Capacity
*YKA series
100%
Linear Capacity
Control
15%
Using proven single inverter driven compressor technology, the CITY
MULTI range is favored by the industry for low starting currents (only 8 amps
for a 16HP YKA/YJM-A outdoor unit), and smooth transition across the range of
compressor frequencies.
Unbeatable Efficiency
The unique Heat Interchange Circuit (HIC) enhances efficiency by providing additional sub-cooling and allows the
expansion device to effectively control the refrigerant distribution, thereby increasing the operating efficiency and
reducing the volume of refrigerant in each system.
Common Refrigerant Circuit
Condenser
Condenser
Heat exchanger
LEV
Page 7
LEV
* The values vary depending on the actual
conditions such as ambient temperature.
capacity
Y series 42-54HP
100%
100%
100%
1 inverter compressor
3 inverter compressors
2 inverter compressors
Accumulator
No2
Inverter
Evaporator
No3
No2
Medium temperature
Bypass
Evaporator
Y series 22-40HP
capacity
capacity
Compressor
Accumulator
* image
Stable and smooth operation (for standard models)
Y series 8-20HP
Supercooled
heat exchanger
Low temperature
High
The outdoor unit combinations comprise 1 unit for 8-20HP systems, 2 units for 22-40HP systems and 3 units for
42-54HP systems. Each unit carries one inverter compressor making simple and highly reliable control possible.
Not only does it allow low starting currents, the inverter-driven compressor also provides precise indoor comfort
and adapts to the air conditioning load.
High temperature
Compressor
Compressor Frequency
All CITY MULTI compressors are inverter-driven type.
-Capable of precisely matching a building's cooling and heating demands.
Heat Interchange Circuit
CITY MULTI Refrigerant Circuit
Low
LEV
No1
load
No1
load
No1
No1
No2
No1
load
Page 8
I ntelligent Power Module (IPM)
Technology
The YKA range from Mitsubishi Electric provides precise control of energy input, through utilization of its Intelligent
Power Module (IPM) technology. By employing this technology it is possible to closely match the building
requirements, achieving more accurate control of the occupied space. By using incremental 1Hz steps of capacity
control, the amount of power input required is significantly reduced, resulting in greatly improved EER’s.
In addition, IPM technology ensures effective performance under partial load conditions, a condition that most
systems will be in for the majority of the normal working life cycle. By taking account the efficiency at both part
load, and peak load conditions, R410A CITY MULTI is designed to provide unbeatable year round/seasonal
efficiency.
The difference between YKA/YHA/YJM-A and
previous Mitsubishi Electric models
Total Energy Conservation
Comparison of EER (Energy Efficiency Ratio) – 16HP system
Technology is key when increased efficiency is demanded.
The CITY MULTI YKA/YHA/YJM-A range is able to deliver this in simple ways.
A highly efficient R410A scroll compressor design results in less friction losses at the motor. A simplified refrigerant
circuit (low pressure loss) including a new accumulator design also adds a few more points to the efficiency scale.
Enhancements to the heat interchange circuit, an inverter driven fan motor and a heat exchanger design again add
vital increases to overall system efficiencies and EERs.
EER
4.5
4.0
Energy
Saving
3.5
26%
3.0
2.5
The importance of EER
45%
Energy Saving
3.46
4.00
High EER is realized
2.75
EER stands for “Energy Efficiency Ratio”. It is a measure of the useful energy a system can deliver compared to
the energy it consumes. It is calculated by dividing the energy output by the energy input of a system. The higher
the figure then the more efficient the system is deemed to be. Mitsubishi Electric VRF models, the world's highest
energy-efficient air-conditioners, will undoubtedly reduce millions of tons of CO2 emissions.
2.0
0
R22
Our equivalent product
10 years ago, PUHY-400YMF-B
Standard model
PUCY-P400YKA
High COP model
PUCY-EP400YSKA
* The values were obtained under the standard conditions.
Page 9
Page 10
E fficient R410A refrigerant
History of refrigerant
R22, an HCFC-based refrigerant, has been a popular choice for most chillers. R22 has been targeted by the
Montreal Protocol to be phased out in new equipment. Additionally, governments in many countries are enforcing a
ban of HCFC-based refrigerants for new installations.
Because of these restrictions, R410A refrigerants are desirable. R410A is a blend of HFCs, which do not deplete
the ozone.
Technical aspects of refrigerant
For the Environment
R410A is a more efficient refrigerant as it has a higher specific heat capacity when compared to R407C or R22.
This higher energy carrying capacity allows for smaller pipe sizes, longer pipe runs and reduces the volume of
refrigerant within a system. This is a major factor when concerning safety and environmental requirements in the
design, manufacture, installation, operation, maintenance and disposal or refrigerating systems.
New Design
New unit Casing
Reduction in fan input power
Enhancing environmental care (measures for the RoHS Directive and the refrigerant reduction)
Every unit is in compliance with the RoHS Directive,* which stands for the Restriction of Hazardous Substances:
Lead-free soldering is used to avoid Lead Groundwater Contamination on the print board. The amount of
refrigerant on the unit has also been reduced to enhance environmental care.
* RoHS Directive: the restriction of the use of certain hazardous substances in electrical and electronic equipment that has been sold in EU since July 2006
Improvement of COP
Improvement of COP
Photo : Y series
Improvement of reliability and
easy maintenance
Page 11
Page 12
O utdoor unit
Cooling-only Series (Y), High COP (Y)
Heat Pump Series (S)
Heat Pump Series (Y), High COP (Y)
Water cooled Heat Pump Series (WY)
Heat Recovery Series (R2)
Heat Recovery Series - High COP (R2)
Water Cooled Heat Recovery Series (WR2)
REPLACE MULTI Series (Y)
REPLACE MULTI Series (R2)
Outdoor unit
Page 13
Page 14
S (Heat Pump) series
Y (Cooling-only/Heat Pump) series
Cooling-only/Cooling or Heating
S series
PUMY-P VKM(-BS)
PUMY-P YKM(-BS)
Y series
PUCY-P YKA(-BS)
PUCY-P YSKA(-BS)
PUHY-P YHA(-BS)
PUHY-P YSHA(-BS)
R2 (Heat Recovery) series
Simultaneous Cooling and Heating
PUCY-EP YSKA(-BS)
PURY-P YJM-A(-BS)
PURY-P YSJM-A(1)(-BS)
The CITY MULTI S series (for small applications) and Y series (for large applications) make use of a two-pipe
refrigerant system, which allows for system changeover from cooling to heating, ensuring that a constant indoor
climate is maintained in all zones. The compact outdoor unit utilizes R410A refrigerant and an INVERTER-driven
compressor to use energy effectively.
With a wide line-up of indoor units in connection with a flexible piping system, the CITY MULTI series can be
configured for all applications. Up to 12 (S series) or 50 (Y series) indoor units can be connected with up to 130%
connected capacity to maximize engineer's design options. This feature allows easy air conditioning in each area
with convenient individual controllers.
The world’s first two-pipe system that
Simultaneously Cools and Heats
CITY MULTI R2 series offers the ultimate in freedom and flexibility. Cool one zone while heating another. Our
exclusive BC controller makes two-pipe simultaneous cooling and heating possible. The BC controller is the
technological heart of the CITY MULTI R2 series. It houses a liquid and gas separator, allowing the outdoor unit to
deliver a mixture of hot gas for heating and liquid for cooling, all through the same pipe.
This innovation results in virtually no energy wasted by being expelled outdoors. Depending on capacity, up to 50
indoor units can be connected with up to 150% connected capacity
Joint
Header
Office
Cooling
Outdoor unit
Installation image (R2 series)
Meeting room
Cooling
Large Offices (Y series)
Outdoor unit
PURY-EP YJM-A(-BS)
PURY-EP YSJM-A(1)(-BS)
PUHY-EP YJM-A(-BS)
PUHY-EP YSJM-A(1)(-BS)
The two-pipe zoned system designed for Heat
Pump Operation
Small Offices (S series)
R2 series
BC controller
Refrigerant piping: 2-pipe type
Outdoor unit
Equipment room
Cooling
Meeting room
Heating
System Pipe Lengths
System Pipe Lengths
[8-54HP (Cooling-only Y series)] [16-44HP (Cooling-only High COP Y series)]
[8-50HP (Y series)] [8-36HP (High COP Y series)]
[4.5-6HP (S series)]
Refrigerant Piping Lengths
Total length
Maximum allowable length
Farthest indoor from first branch
Vertical differentials between units
Indoor/outdoor (outdoor higher)
Indoor/outdoor (outdoor lower)
Indoor/indoor
Maximum meters [Feet]
300 [984]
150 (175 equivalent)
[492(574)]
30 [98]
Maximum meters [Feet]
50 [164]
40 [131]
15 [49]
Refrigerant Piping Lengths
Total length
Maximum allowable length
Farthest indoor from first branch
Vertical differentials between units
Indoor/outdoor (outdoor higher)
Indoor/outdoor (outdoor lower)
Indoor/indoor
Maximum meters [Feet]
1,000 [3,280]
165 (190 equivalent)
[541(623)]
40 [131]*1
Maximum meters [Feet]
50 [164]*3
40 [131]*3, *4
15 [49]*2
Outdoor unit
Furthest piping length
174m [574ft] (equivalent length)
175m
(actual length 150m [492ft])
Top-bottom differential
50m [164ft]
Outdoor unit
Furthest piping length
190m [623ft] (equivalent length)
(actual length 165m [541ft])
Top-bottom differential
50m [164ft] *1
Between indoor units
top-bottom differential
15m [49ft]
Between indoor units
top-bottom differential
15m [49ft]
Indoor unit
Indoor unit
*1 90m is available. When the piping length is 40m or longer, use the one size larger liquid pipe between the indoor unit and the first branch. [for PUCY-P-Y(S)KA(-BS)/PUCY-EP-YSKA(-BS)]
*2 30m is available. When the height difference is 15m or greater, use the one size larger liquid pipe between the indoor unit and the indoor unit. [for PUCY-P-Y(S)KA(-BS)/PUCY-EP-YSKA(-BS)]
*3 Depending on the model and installation conditions, top-bottom differential 90m [295ft] (o/u above) and 60m [196ft] (o/u below) is available. For more detailed information, please contact your nearest sales office
or distributor.
*4 4m or less in cooling at outdoor temperature 10͠ QT NQYGT for PUHY-P-YHA (-BS) only.
Outdoor unit
Page 15
Office
compartment
Heating
Office
Heating
[8-36HP (R2 series)]
[8-28HP (High COP R2 series)]
Refrigerant Piping Lengths
Maximum meters [Feet]
Total length
550-800 [1,804-2,624]
(P600,P650 models only: Refer to the Data book for other models.)
Maximum allowable length
165 (190 equivalent)
[541(623)]
Maximum length between outdoor
and single/main BC controller
110 [360]
*Maximum total length is dependent upon the distance
between the outdoor unit and the single/main BC
Controller.
Maximum length between single/main
BC controller and indoor
40-60 [131-196]
Vertical differentials between units Maximum meters [Feet]
Indoor/outdoor (outdoor higher)
50 [164]*2
Indoor/outdoor (outdoor lower)
40 [131]*2
Indoor/BC controller (single/main)
15 [49]
*Maximum length between single/main BC controller
and indoor is dependent upon the vertical differential
between the single/main BC controller and the indoor
unit.
Indoor/indoor
15 [49]
Main BC Controller/Sub BC Controller
15 [49]
Outdoor unit
Top-bottom differential
50m [164ft]
*1 *2
Between indoor unit and
BC controller topbottom differential 15m [49ft]
Furthest piping length
190m [623ft] (equivalent length)
(actual length 165m [541ft])
BC controller
Indoor
Between indoor unit
and BC controller
top-bottom differential 15m [49ft]
unit
Between indoor units
top-bottom
differential 15m [49ft]
*1 When the outdoor unit is installed below the indoor unit, top-bottom differential is 40m [131ft].
*2 Depending on the model and installation conditions, top-bottom differential 90m [295ft] (o/u above) and 60m [196ft] (o/u below) is available. For more detailed information, please contact your nearest sales office or
distributor.
Outdoor unit
Page 16
Y series
Y series
Features in Y (Cooling-only) series
Low Noise Levels New Fan Design
Compact Design
Industry leading weight saving
CITY MULTI VRF systems led the introduction of
larger single fan motors some ten years ago,
achieving substantially lower noise levels over
multiple designs.
Continuing the development in the areas of blade
shape and weight, Mitsubishi Electric have managed
to achieve even higher performance and lower noise
levels. To reduce noise levels further and comply
with inner city residential noise regulations, all
outdoor units include low noise mode. This function
works by lowering the fan speed and compressor
frequency proportionally with reduction in demand.
10HP outdoor unit
The manageability of the outdoor unit has been improved
due to a drastic reduction in its weight, leading to easy
transportation, installation, and reduction in withstand load.
50kg
reduction in weight
233kg
PUHY-P250YGM-A
183kg
PUCY-P250YKA
Industry leading space saving
8-12HP outdoor units
mm (in.)
Example of 6-people elevator.
60
Depth
740
(29-3/16)
Width
920
(36-1/4)
10
(13/32)
10
(13/32)
800 (31-1/2)
mm (in.)
300
(11-13/16)
300
(11-13/16)
740
(29-3/16)
1,490
(58-11/16)
As R410A has a higher specific heat capacity than
R22, the pipework is smaller. This means the pipe
itself is cheaper, easier to install and less riser space
is required within the building.
450
(17-3/4)
15 (5/8)
920 (36-1/4)
Gas
piping
450
(17-3/4)
15 (5/8)
15 (5/8)
8-12HP systems (Y series)
1.42m2
Conventional
740
(29-3/16)
1,490
(58-11/16)
1,220 (48-1/16)
15 (5/8)
14-18HP systems (Y series)
1.86m2
18HP (Yseries)
Low
Noise
Newly designed refrigerant
circuit (low pressure loss)
Photo : Y series
Highly efficient R410A
Scroll compressor
The compressor compartment is sealed by metal panels to attain
low noise levels in all directions.
Blue Fin Treatment
mm (in.)
Effective Use of Space
The new models have a smaller foot print
and service space requirement than
previous models.
R410A Pipe Sizing
11
(7/16)
Height
1,650
(65)
Low
Noise
mm (in.)
1,400 (55-1/8)
850 (33-1/2)
The downsized outdoor unit can be
transported through a 800 mm wide door.
New inverter driven outdoor fan motor
ø28.58
(ø1-1/8)
Liquid
piping
ø12.7
(ø1/2)
Gas
piping
ø22.2
(ø7/8)
Liquid
piping
The anti-corrosion Blue Fin treatment of the heat
exchanger is especially effective in urban
environments where the traffic pollutions can
damage the aluminum fins reducing the capacity
and life expectancy of the unit. All CITY MULTI
R410A outdoor units have been treated with Blue
Fin.
*Standard:Anti-corrosion Blue Fin treatment & copper tube.
BS type (optional):salt-resistant cross fin & copper tube.
ø9.52
(ø3/8)
Based on 10HP model
mm (in.)
Conventional CITY MULTI (YGM series)
450
(17-3/4)
840
(33-1/8)
1,740
(68-9/16)
300
(11-13/16)
740
(29-3/16)
1,490
(58-11/16)
450
(17-3/4)
450
(17-3/4)
1,990 (78-3/8)
15 (5/8)
3.46m2
1,220 (48-1/16)
15 (5/8)
1.86m2
The unit can easily be transported even into slender buildings.
Easy to
transport
CITY MULTI
makes it easy.
The narrow space between buildings
makes it difficult to use a crane.
Outdoor unit
Page 17
46%
reduction
Easy Maintenance
Under maintenance
In operation
Even when one of the indoor units in the system is
under maintenance, the other indoor unit can still
operate.
* Not applicable to all situations.
* Be sure to turn off the power to the indoor unit when repairing or
servicing the unit.
System Check
Ensuring simple and easy maintenance, system
tests are available to check wiring, sensors and the
refrigerant amount.
60Pa High Static Pressure
as standard
Y series corresponds to high static pressure of
60Pa, ideal and flexible for any type of application.
Outdoor unit
Page 18
Water Coold Series
Water Cooled Series
System Pipe Lengths
Cooling or Heating
WY series
PQHY-P YHM-A
PQHY-P YSHM-A
[8-36HP (WY series)]
PQRY-P YHM-A
PQRY-P YSHM-A
WR2 series
[WY(Heat Pump) series]
Water energy source system allows switching
between cooling and heating.
Farthest indoor from first branch
Maximum meters [Feet]
300 [984]
500 [1,640]
165 (190equivalent)
[541 (623)]
40 [131]
Vertical differentials between units
Indoor/heat source (heat source higher)
Indoor/heat source (heat source lower)
Indoor/indoor
Maximum meters [Feet]
50 [164]
40 [131]
15 [49]
Equipment room Equipment room
Cooling
Cooling
Meeting room
Cooling
Top-bottom differential
50m [164ft] *1
Maximum meters [Feet]
300-550 [984-1,804]
500-750 [1,640-2,460]
165 (190equivalent)
[541 (623)]
110 [360]
Maximum length between heat source and single/main BC controller
*Maximum total length is dependent upon the distance between
the outdoor unit and the single/main BC Controller.
Maximum length between single/main BC controller and indoor
40-60 [131-196]
Vertical differentials between units
Indoor/ heat source ( heat source higher)
Indoor/ heat source ( heat source lower)
Indoor/BC controller (single/main)
Indoor/indoor
Main BC Controller/Sub BC Controller
Maximum meters [Feet]
50 [164]
40 [131]
15 [49]
15 (10) [49 (32)]
15 (10) [49 (32)]
Maximum length
between heat source
and single/main
BC controller
110m [360ft]
Furthest piping length
190m [623ft]
(equivalent length)
(actual length 165m [541ft])
Top-bottom
differentrial 50m [164ft]
*1
Between indoor units
top-bottom differential
15m [49ft]
Heat source unit
Between indoor unit and
BC controller topbottom differential
15m [49ft]
Furthest piping length
190m [623ft]
(equivalent length)
(actual length 165m
[541ft])
Indoor unit
BC controller
*1 When the outdoor unit is installed below the indoor unit, top-bottom differential is 40m
[131ft].
Heat source unit
Heat
source
unit
Refrigerant Piping Lengths
Total length (8-12HP)
Total length (16-24HP)
Maximum allowable length
Heat source unit
The WY-Series has all the benefits of the Y-Series using water source condensing units.
Condensing units can be situated indoors allowing greater design flexibility and no limitation on building size.
Depending on capacity, up to 17 to 50 indoor units can be connected to a single condensing unit with individualized
and/or centralized control. The two-pipe system allows all CITY MULTI solutions to switch between cooling and
heating while maintaining a constant indoor temperature.
Installation image (WY series)
[8-24HP (WR2 series)]
Refrigerant Piping Lengths
Total length (8-12HP)
Total length (16-36HP)
Maximum allowable length
Indoor
Between indoor unit
and BC controller
top-bottom differential 15m [49ft]
(10m [32ft])
Water piping
unit
Between indoor units
top-bottom
differential 15m [49ft]
(10m [32ft])
*1 When the outdoor unit is installed below the indoor unit, top-bottom differential is 40m
[131ft].
Director's room
Cooling
COP comparison (energy efficiency)
The new water cooled outoor unit offers a greater efficiency with a higher COP compared to our YGM conventional
model.
COP comparison
Meeting room
Cooling
PQHY
[WR2(Heat Recovery) series]
Advanced water heat source unit enjoying the
benefits of R2 series
The CITY MULTI WR2 series provides all of the advantages of the R2 series with the added advantages of a water
heat source system, making it suitable for wider range of applications in high rises, frigid climates, coastal areas,
etc.
Not only does it produce heat recovery from the indoor units on the same 2-pipe refrigerant circuit, it also produces
heat recovery via the water circuit between heat source units, making it a very economical system.
Installation image (WR2 series)
Equipment room Equipment room
Cooling
Cooling
YHM
YGM
YHM
8
4.68
4.68
5.71
6.06
4.68
5.33
5.65
6.06
10
4.71
4.71
5.13
5.43
4.71
5.43
5.08
5.43
12
4.55
4.60
4.50
4.60
16
3.96
3.96
5.45
5.78
3.96
4.54
5.40
5.78
18
5.08
5.37
5.03
5.37
20
3.72
3.72
4.89
5.22
3.72
4.63
4.84
5.22
22
4.68
4.70
4.63
4.70
24
4.45
4.46
4.41
4.46
Compact design
26
5.22
5.52
-
28
5.13
5.33
-
Downsized by approximately
57%*, the new models enable
an effective use of space.
Height
1,800
(70-7/8)
Heat source unit
BC controller
Heat recovery
Director's room
Heating
Heat recovery
Indoor units
Heat recovery
Water
circuit
Refrigerant Circuit
Width
880
(34-11/16)
P200, P250YGM (WY/WR2 series)
Cooling
Indoor units
34
4.52
4.65
-
36
4.34
4.40
-
Height
1,160
(45-11/16)
Width
990
(39)
Heating
Water piping
32
4.69
4.82
-
mm (in.)
*8/10/12HP
Heat
source
unit
30
4.94
5.19
-
Depth
550
(21-11/16)
BC controller
Heat source unit
Meeting room
Heating
Meeting room
Heating
PQRY
YGM
HP
Cooling
Heating
Cooling
Heating
Cooling
Heating
Cooling
Heating
Depth
550
(21-11/16)
P200, P250, P300YHM (WY/WR2 series)
Weight saving
The reduction in weight leads to easy transportaion and installation.
Weight comparison
PQHY
PQRY
YGM
YHM
YGM
YHM
unit : kg
HP
8
272
195
263
181
10
275
195
266
181
12
195
181
16
452
390
440
362
18
390
362
20
456
390
444
362
22
390
362
24
390
362
26
585
-
28
585
-
30
585
-
32
585
-
34
585
-
36
585
-
Double heat recovery (WR2)
Outdoor unit
Page 19
Outdoor unit
Page 20
REPLACE MULTI series
series
Cost
Reduction in
installation cost
by 55%
16.5%
17.4%
8.6%
12.1%
7%
31.3%
10.7%
14.2%
14.2%
Standard CITY MULTI
New REPLACE MULTI
(Total system replacement)
(Component replacement )
*Estimation based on installation in Japan.
Low renewal cost (estimation)
Reduction in waste and time also results in minimized
construction work cost by approximately 55% compared
to the conventional total system replacement.
(Estimated based on installation in Japan)
The major cutback achieved here is the pipe work costs
by reusing existing piping which generally involves
demolitions of exterior and interior walls, and rooftops.
Moreover, theses feature add up to not only less labor,
materials, lower operating costs, but also reduce costs
for waste disposal.
Overhead costs for construction
Costs for construction work
Costs for removal work
Costs for electrical work
Costs for piping work
Costs for installation work
Time
Short and quick construction process and time
Compared to the installation process and time to install a complete new system, REPLACE MULTI offers shorter
and quicker installation.
The key cause of this is because with REPLACE MULTI, without any use of special kit, existing piping can be
reused and works at rooftop or walls for new piping are not required. This results in reduced installation time and
system downtime which is an attractive factor to minimize the effect on business working hours.
Piping length
Outdoor unit
[8-22HP (Y series)]
Refrigerant Piping Lengths
Total length
Maximum allowable length
Furthest piping length
150m [492ft] (equivalent length)
(actual length 120m [393ft])
Top-bottom differential
50m [164ft]
Between indoor units
top-bottom differential
15m [49ft]
Vertical differentials between units
Indoor/outdoor (outdoor higher)
Indoor/outdoor (outdoor lower)
Indoor/indoor
Outdoor/outdoor*
Indoor unit
Image of 8HP-14HP Installation
Outdoor unit
Furthest piping length
125m [410ft] (equivalent length)
(actual length 100m [328ft])
Top-bottom differential
50m [164ft]
Maximum meters [Feet]
300 [984]
120 [393]
OU
OU
equivalent150 [492]
Farthest indoor from first branch
40 [131]*
L1
L2
*REPLACE MULTI can combine an existing
multiple system if the length difference of
IU
IU
farthest indoor from first branch is no larger
Existing system (L1–L2) < 40
than 40m.
Between indoor units
top-bottom differential
15m [49ft]
Image of 28HP-36HP Installation
New REPLACE MULTI
Removal of old units . Collection of refrigerant
Removal of old units . Collection of refrigerant
(Total system replacement)
Removal of existing piping
*For models PUHY-RP400~RP550YSJM-A
Maximum meters [Feet]
250 [820]
100 [328]
OU
OU
equivalent 125 [410]
40 [131]*
Farthest indoor from first branch
L1
L2
*REPLACE MULTI can combine an existing
multiple system if the length difference of
IU
IU
farthest indoor from first branch is no larger
Existing system (L1–L2) < 40
than 40m.
Refrigerant Piping Lengths
Total length
Maximum allowable length
Maximum meters [Feet]
50 [164]
40 [131]
15 [49]
0.1 [0.3]
Between indoor unit and
BC controller topbottom differential 15m [49ft]
Furthest piping length
125m [410ft] (equivalent length)
(actual length 100m [328ft])
BC controller
Indoor
Between indoor unit
and BC controller
top-bottom differential 15m [49ft]
Outdoor unit
Page 21
unit
Between indoor units
top-bottom
differential 15m [49ft]
Reuse of existing piping
Installation of new units
Installation of new units
Air-tightness test
Air-tightness test
Evacuation
Evacuation
Refrigerant charge .
Judgment refrigerant amount .
Flushing out mineral oil (Automatically) .
Test run
*For models PUHY-RP600~RP900YSJM-A
[8-12HP (R2 series)]
Refrigerant Piping Lengths
Total length
Maximum allowable length
Top-bottom differential
50m [164ft]
Reduction in
working
hours
Installation of new piping and wiring
Refrigerant charge
Outdoor unit
(Component replacement )
[24-36HP (Y series)]
Vertical differentials between units
Indoor/outdoor (outdoor higher)
Indoor/outdoor (outdoor lower)
Indoor/indoor
Outdoor/outdoor*
Indoor unit
Maximum meters [Feet]
50 [164]
40 [131]
15 [49]
0.1 [0.3]
Standard CITY MULTI
Maximum meters [Feet]
220 [721]
100 (90) [328 (295)]*
equivalent 125 (115) [410 (377)] *
Farthest indoor from BC controller
30 [98]
*Values in ( ) is applied when indoor total capacity exceeds 130% of outdoor unit capacity
Test run
n
tio
uc ng
d
Re orki s
w our
h
in
ction
in constru
Reductioness and time
proc
Vertical differentials between units
Maximum meters [Feet]
Indoor/outdoor (outdoor higher)
50 [164]
Indoor/outdoor (outdoor lower)
40 [131]
Indoor/BC controller (single/main)
15 (10) [49 (32)]*
*Maximum length between single/main BC controller and indoor is dependent upon the
vertical differential between the single/main BC controller and the indoor unit.
Indoor/indoor
15 (10) [49 (32)]*
Main BC Controller/Sub BC Controller 15 (10) [49 (32)]*
*Values in ( ) is applied when indoor total capacity exceeds 130% of outdoor unit capacity
Outdoor unit
Page 22
REPLACE MULTI series
REPLACE MULTI series
Technology
Patent Technology
*Patented or unpatented varies
depending on the countries.
Mineral oil collection
At the core of the new innovative REPLACE MULTI technology to reuse existing piping is the mineral oil collection
to clean out the minerals in previously installed pipe work.
Mineral oil collection with Mitsubishi Electric’s unique flushing operation is carried out while the new refrigerant is
being charged (if the length or diameter of the refrigerant pipe is unknown).
With this advance technology, the cleaning process is completed quickly, thoroughly and automatically to keep the
air environment comfortable.
Q UICK &
AUTOMATIC
COMFORT
Quick and automatic mineral oil
collection with simple step
depleting potential. R22 has been widely used in Air-Conditioning and Refrigeration
equipment; however, virgin R22 refrigerant within the European countries are
banned under European legislation driven by the Montreal Protocol.
R410A
Facts
Mineral oil can be collected in approximately 85~105 minutes.
Quick and automatic
mineral oil collection
Condition of
mineral oil collection
(Outdoor temperature)
* The time varies depending on the pipe length and temperature conditions.
Y series Max.120 minutes(cooling) / Max.140 minutes(heating)
R2 series Max.180 minutes(cooling)
REPLACE MULTI can clean pipe in winter season.
Y series -10°C ~ 45°C
R2 series - 5 °C ~ 45°C
Density of R410A
refrigerant
R410A refrigerant < R22 refrigerant
R410A gas refrigerant < mineral oil < R410A liquid refrigerant
Speed
R410A liquid refrigerant < R410A gas refrigerant
Comfort not interrupted
during the process
R22 is a single hydrochlorofluorocarbon or HCFC compound known to have ozone
R22
Quick & Automatic
R410A is a binary blend of hydrofluorocarbon or HFC compounds with ZERO ozone
depleting potential. R410A is a more energy efficient refrigerant than R22 offering a
Principle of mineral oil collection
Mineral oil in R22 system is not soluble to the R410
refrigerant. When R410A two phase refrigerant flows
through a pipework, shear force among the mineral oil
and R410A refrigerant pushes out and strip off from the
mineral oil attached to the piping surface. The mineral
oil floats on the surface between gas and liquid
refrigerant.
Flushing operation (sectional view)
Center of the pipe
Gas
refrigerant
(R410A)
Liquid
refrigerant
(R410A)
Floating layer
of mineral oil
Mineral oil attached
to piping surface
Refrigerant pipe wall
greater heat transfer, which is one of the key elements to stop global warming.
Flushing operation
Why mineral oil collection is required.
Flow
Gas Refrigerant
Mineral Oil
Piping used with R22 refrigerant has
mineral oil attached to its surface.
Refrigerant piping used for R22
requires treatment before it is
reused.
If the refrigerant is 2 phase, liquid refrigerant speed is
accelerated by the gas refrigerant flowing at high-speed in
the center part of the pipeworks. With this acceleration, the
mineral oil floating at the surface of liquid refrigerant also
increases its speed and mineral oil collection can be finished
smoothly and quickly in the existing refrigerant piping.
Liquid Refrigerant
Mineral oil in the piping
must be removed or a new
piping needs to be installed.
If the mineral oil in new refrigerant R410A refrigerant and R22 refrigerant are mixed, there
is a possibility of sludge due to deterioration. When this occurs, mineral oil may not
dissolve in the R410A refrigerant and lead to problems in compressor and LEV clogging.
Outdoor unit
Page 23
Outdoor unit
Page 24
REPLACE MULTI series
REPLACE MULTI series
The amount of time required for mineral oil collection differs by the condition of refrigerant. The most effective and
quickest result can be expected when 2 phase refrigerant is used.
Mineral oil collection speed comparison by refrigerant type
Amount of
remained
mineral oil
Target line
This mineral oil collection with 2 phase
refrigerant is a patented technology* of
Mitsubishi Electric and was awarded by the
Japanese Institute and Innovation in 2007.
Gas refrigerant
Patent
Technology*
Mineral oil collection flow
The following shows an overview of the mineral oil collection flow along with the refrigerant flow. During mineral oil
collection, with Heat Pump outdoor unit, cooling or heating operation is available, and with Heat Recovery outdoor
unit, only cooling operation is available.
Mineral oil in the existing piping is collected along with the new refrigerant flow. At the end of each flow, the
refrigerant returns to outdoor unit with mineral oil which is collected in an accumulator and automatically removed
to an oil container in the outdoor unit.
Liquid
refrigerant
* Patented or unpatented
varies depending on
the countries.
Gas-liquid 2-phase
refrigerant
Time
Automatic refrigerant charge
Amount of refrigerant required for the system is automatically determined and charged after the mineral oil
collection is completed.
Example
Heat pump Y series outdoor unit
(Cooling mode)
Ester oil
Mineral oil
High pressure gas refrigerant
High pressure 2-phase refrigerant
Middle pressure 2-phase refrigerant
Low pressure 2-phase refrigerant
Low pressure gas refrigerant
Outdoor unit
Collects mineral oil
in gas piping
Comfort
Automatically performed by just setting the dip switch, mineral oil collection can even be performed without turning
off the air conditioners. Therefore, it can maintain a comfortable indoor air environment, cooling or heating
operation with Y series outdoor unit, and cooling operation with R2 series.
*Only cooling operation with R2 series
Existing piping
(Gas pipe)
3.0MPa
0.9MPa
Heat
exchanger
Oil tank
comp
0.8MPa
1 Make two phase mixture
by plate heat exchanger
Accumulator
LEV
oil container
Indoor
unit
2 Pressure control by
electric expansion valve
LEV
Indoor
unit
2.7MPa
Existing piping
(Liquid pipe)
Collects mineral oil
in liquid piping
First, high pressure gas from the compressor is condensed to 2-phase refrigerant by plate heat
exchanger 1 and reduces its pressure to middle pressure 2-phase refrigerant by a LEV 2 . It
allows 2-phase refrigerant to flow in the existing R22/R407C piping. This 2-phase refrigerant
(liquid refrigerant speed is accelerated by gas refrigerant) accelerates to peel off mineral oil in
the existing liquid pipe.
Then, middle pressure 2-phase refrigerant reduces its pressure to low pressure 2-phase
refrigerant by an indoor unit LEV to collect mineral oil in the existing gas pipe.
Lastly, the refrigerant returns to outdoor unit with mineral oil and heat exchanges to become low
pressure gas refrigerant through heat exchanger. Mineral oil in gas refrigerant is separated at
accumulator and only gas refrigerant returns to compressor. Mineral oil collected in accumulator
is automatically removed to oil container in the outdoor unit.
Outdoor unit
Page 25
Outdoor unit
Page 26
Wide Selection of Outdoor Units
System
Type
Model name
Y series
HP
Model
Page31 - Page40
NEW
5
4
4.5
5
6
10
12
8
10
16
18
20
22
10
12
14
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
P400 P450 P500 P550 P600 P650 P700 P750 P800 P850 P900 P950 P1000 P1050 P1100 P1150 P1200 P1250 P1300 P1350
12
L
Cooling
only
14
P112 P125 P140 P200 P250 P300 P350
S
PUCY-P YKA(-BS)
PUCY-P YSKA(-BS)
8
16
18
XL
10
10
10
12
14
16
18
18
12
12
16
16
18
16
18
18
18
20
20
18
12
14
18
14
16
16
16
16
16
16
16
18
14
14
18
14
16
18
14
18
18
16
18
18
18
18
18
20
20
*1
Y series - High COP
NEW
Page41 - Page46
S
PUCY-EP YSKA(-BS)
8
8
10
8
10
10
12
L
14
14
14
8
8
10
10
12
8
10
10
12
12
14
14
14
14
14
12
14
14
14
14
14
14
14
16
XL
S series
NEW
Page47 - Page48
PUMY-P VKM(-BS)
PUMY-P YKM(-BS)
4.5
Air
Cooled
Y series
5
6
Page49 - Page56
PUHY-P YHA(-BS)
PUHY-P YSHA(-BS)
S
8
10
12
14
L
Heat
Pump
Y series - High COP
Page57 - Page64
S
PUHY-EP YJM-A(-BS)
PUHY-EP YSJM-A(-BS)
*1
L
8
8
8
10
XL
Y series - High COP
PUHY-EP YSJM-A1(-BS)
XL
Page 27
10
10
12
18
8
10
12
10
12
14
14
8
10
12
S
L
*1. Indicates S, L, XL modules
16
10
12
14
14
14
16
18
14
16
18
18
18
8
8
8
8
8
8
10
12
12
10
12
12
10
12
12
12
16
16
12
14
16
14
14
16
10
12
12
12
12
12
12
12
8
10
10
10
10
10
10
10
10
10
12
*2. The circled numbers in the table indicate the horse power, and the combination of S, L, and XL modules.
Page 28
Wide Selection of Outdoor Units
System
Type
Model name
R2 series
HP
Model
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
P200
P250
P300
P350
P400
P450
P500
P550
P600
P650
P700
P750
P800
P850
P900
Page71 - Page77
PURY-P YJM-A(-BS)
PURY-P YSJM-A(-BS)
R2 series
PURY-P YSJM-A1(-BS)
Air
Cooled
Heat
Recovery
*1
R2 series - High COP
Page78 - Page81
PURY-EP YJM-A(-BS)
PURY-EP YSJM-A(-BS)
R2 series - High COP
PURY-EP YSJM-A1(-BS)
WY series
Heat
Pump
Water
Cooled
PQHY-P YHM-A
PQHY-P YSHM-A
WR2 series
Heat
Recovery
Air
Cooled
Page85 - Page90
PUHY-RP YJM-B
PUHY-RP YSJM-B
*1
REPLACE MULTI R2 series
Heat
Recovery
*1. Indicates S, L, XL modules
Page 29
Page82 - Page84
PQRY-P YHM-A
PQRY-P YSHM-A
REPLACE MULTI Y series
Heat
Pump
Page65 - Page70
Page91
PURY-RP YJM-B
PURY-RP YSJM-B
*2. The circled numbers in the table indicate the horse power, and the combination of S, L, and XL modules.
Page 30
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-P YKA(-BS)
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-P YKA(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1
Power input
Current input
EER
*1
Cooling capacity
*3
Temp. range of
Indoor
cooling
Outdoor
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
(measured in anechoic room)
Refrigerant piping Liquid pipe
diameter
Gas pipe
FAN
Type x Quantity
Air flow rate
Specifications
PUCY-P200YKA (-BS)
PUCY-P250YKA (-BS)
PUCY-P300YKA (-BS)
PUCY-P350YKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz 3-phase 4-wire 380-400-415V 50/60Hz 3-phase 4-wire 380-400-415V 50/60Hz 3-phase 4-wire 380-400-415V 50/60Hz
kW
22.4
28.0
33.5
40.0
kcal/h
20,000
25,000
30,000
35,000
BTU / h
76,400
95,500
114,300
136,500
kW
5.59
7.08
8.95
10.78
A
9.4-8.9-8.6
11.9-11.3-10.9
15.1-14.3-13.8
18.1-17.2-16.6
kW / kW
4.00
3.95
3.74
3.71
kW
22.7
28.4
34.0
40.6
W.B.
15.0~24.0°C (59~75°F)
15.0~24.0°C (59~75°F)
15.0~24.0°C (59~75°F)
15.0~24.0°C (59~75°F)
D.B.
10.0~52.0°C (50~126°F)
10.0~52.0°C (50~126°F)
10.0~52.0°C (50~126°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity 50~130% of outdoor unit capacity 50~130% of outdoor unit capacity 50~130% of outdoor unit capacity
P15~P250/1~17
P15~P250/1~21
P15~P250/1~26
P15~P250/1~30
dB <A>
mm (in.)
57
9.52 (3/8) Brazed
mm (in.)
58
61
9.52 (3/8) Brazed (12.7 (1/2)
Brazed, farthest length >= 90 m)
22.2 (7/8) Brazed
Propeller fan x 1
175
2,917
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
6.9
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 920 x 740
65 x 36-1/4 x 29-3/16
High pressure sensor, High
pressure switch at 4.15 MPa
(601 psi)
Over-heat protection,
Over-current protection
Over-heat protection
Over-current protection
R410A x 6.5 kg (15 lbs)
183 (404)
Salt-resistant cross fin & copper tube
9.52 (3/8) Brazed (12.7 (1/2)
Brazed, farthest length >= 40 m)
22.2 (7/8) Brazed
Propeller fan x 1
175
2,917
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
8.1
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 920 x 740
65 x 36-1/4 x 29-3/16
High pressure sensor, High
pressure switch at 4.15 MPa
(601 psi)
Over-heat protection,
Over-current protection
Over-heat protection
Over-current protection
R410A x 6.5 kg (15 lbs)
201 (444)
Salt-resistant cross fin & copper tube
22.2 (7/8) Brazed
Propeller fan x 1
m3/min
175
L/s
2,917
cfm
6,179
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
*2 External static press.
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Motor output
kW
5.5
Case heater
kW
–
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
mm
1,650 x 920 x 740
External dimension HxWxD
in.
65 x 36-1/4 x 29-3/16
Protection
High pressure protection
High pressure sensor, High
devices
pressure switch at 4.15 MPa
(601 psi)
Inverter circuit
Over-heat protection,
(COMP./FAN)
Over-current protection
Compressor
Over-heat protection
Fan motor
Over-current protection
Refrigerant
Type x original charge
R410A x 5.5 kg (13 lbs)
Net weight
kg (lbs)
174 (384)
Salt-resistant cross fin & copper tube
Heat exchanger
Optional parts
Joint: CMY-Y102SS/LS-G2
Joint: CMY-Y102SS/LS-G2
Joint: CMY-Y102SS/LS-G2
Header: CMY-Y104/108/1010-G Header: CMY-Y104/108/1010-G Header: CMY-Y104/108/1010-G
Notes:
12.7 (1/2) Brazed
28.58 (1-1/8) Brazed
Propeller fan x 1
175
2,917
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
10.4
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 1,220 x 740
65 x 48-1/16 x 29-3/16
High pressure sensor, High
pressure switch at 4.15 MPa
(601 psi)
Over-heat protection,
Over-current protection
Over-heat protection
Over-current protection
R410A x 11.5 kg (26 lbs)
237 (523)
Salt-resistant cross fin & copper tube
Joint: CMY-Y102SS/
LS-G2,CMY-Y202S-G2
Header: CMY-Y104/108/1010-G
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
diameter
Gas pipe
mm (in.)
FAN
Type x Quantity
Air flow rate
m3/min
L/s
cfm
Control, Driving mechanism
Motor output
kW
*2 External static press.
Compressor
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External finish
PUCY-P400YKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
44.0
39,000
150,100
12.71
21.4-20.3-19.6
3.46
44.7
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/1~34
PUCY-P450YKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
48.0
43,000
163,800
15.73
26.5-25.2-24.3
3.05
48.8
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/1~39
PUCY-P500YKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
56.0
50,000
191,100
17.17
28.9-27.5-26.5
3.26
56.9
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/1~43
63
63
65
12.7 (1/2) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed
28.58 (1-1/8) Brazed
28.58 (1-1/8) Brazed
Propeller fan x 1
Propeller fan x 1
Propeller fan x 2
175
175
320
2,917
2,917
5,333
6,179
6,179
11,299
Inverter-control, Direct-driven by motor
Inverter-control, Direct-driven by motor
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter scroll hermetic compressor
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
10.8
12.4
14.3
–
–
–
Pre-coated galvanized steel sheets
Pre-coated galvanized steel sheets
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
(+powder coating for -BS type)
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
<MUNSELL 5Y 8/1 or similar>
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
mm
1,650 x 1,220 x 740
1,650 x 1,220 x 740
1,650 x 1,750 x 740
in.
65 x 48-1/16 x 29-3/16
65 x 48-1/16 x 29-3/16
65 x 68-15/16 x 29-3/16
Protection
High pressure protection
High pressure sensor,
High pressure sensor,
High pressure sensor,
devices
High pressure switch at 4.15 MPa (601 psi) High pressure switch at 4.15 MPa (601 psi) High pressure switch at 4.15 MPa (601 psi)
Inverter circuit
Over-heat protection,
Over-heat protection,
Over-heat protection,
(COMP./FAN)
Over-current protection
Over-current protection
Over-current protection
Compressor
Over-heat protection
Over-heat protection
Over-heat protection
Fan motor
Over-current protection
Over-current protection
Over-current protection
Refrigerant
Type x original charge
R410A x 11.5 kg (26 lbs)
R410A x 11.5 kg (26 lbs)
R410A x 11.8 kg (27 lbs)
Net weight
kg (lbs)
237 (523)
237 (523)
305 (673)
Heat exchanger
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
Optional parts
Joint: CMY-Y102SS/LS-G2,CMY-Y202S-G2 Joint: CMY-Y102SS/LS-G2,CMY-Y202S-G2 Joint: CMY-Y102SS/LS-G2,CMY-Y202S-G2
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
Notes:
*1 Nominal cooling conditions (subject to JIS B8615-2)
Cooling
*1 Nominal cooling conditions (subject to JIS B8615-2)
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 31
61
Model
Power source
Cooling capacity
(Nominal)
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 32
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-P YSKA(-BS)
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-P YSKA(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
Specifications
PUCY-P550YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
61.5
52,900
209,800
15.97
26.9-25.6-24.6
3.85
62.5
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~47
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
63
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
15.88 (5/8) Brazed
diameter
Gas pipe
mm (in.)
28.58 (1-1/8) Brazed
Set Model
Model
PUCY-P250YKA (-BS) PUCY-P300YKA (-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Air flow rate
m3/min
175
175
L/s
2,917
2,917
cfm
6,179
6,179
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
*2 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Motor output
kW
6.9
8.1
Case heater
kW
–
–
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
mm
1,650 x 920 x 740
1,650 x 920 x 740
in.
65 x 36-1/4 x 29-3/16 65 x 36-1/4 x 29-3/16
Protection
High pressure protection
High pressure sensor,
devices
High pressure switch at 4.15 MPa (601 psi)
Inverter circuit
Over-heat protection,
(COMP./FAN)
Over-current protection
Compressor
Over-heat protection
Fan motor
Over-current protection
R410A x 6.5 kg (15 lbs) R410A x 6.5 kg (15 lbs)
Refrigerant
Type x original charge
Net weight
kg (lbs)
183 (404)
201 (444)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 9.52 (3/8) Brazed
12.7 (1/2) Brazed
and distributor
Gas pipe
mm (in.) 22.2 (7/8) Brazed
22.2 (7/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y100VBK3
Joint: CMY-Y102SS/LS-G2,
CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
PUCY-P600YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
68.0
58,500
232,000
17.79
30.0-28.5-27.4
3.82
69.1
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
63
64.5
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed
PUCY-P250YKA (-BS) PUCY-P350YKA (-BS)
Propeller fan x 1
Propeller fan x 1
175
175
2,917
2,917
6,179
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
6.9
10.4
–
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 920 x 740
1,650 x 1,220 x 740
65 x 36-1/4 x 29-3/16 65 x 48-1/16 x 29-3/16
High pressure sensor,
High pressure switch at 4.15 MPa (601 psi)
Over-heat protection,
Over-current protection
Over-heat protection
Over-current protection
R410A x 6.5 kg (15 lbs) R410A x 11.5 kg (26 lbs)
183 (404)
237 (523)
Salt-resistant cross fin & copper tube
9.52 (3/8) Brazed
12.7 (1/2) Brazed
22.2 (7/8) Brazed
28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y100VBK3
Joint: CMY-Y102SS/LS-G2,
CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
PUCY-P250YKA (-BS) PUCY-P400YKA (-BS)
Propeller fan x 1
Propeller fan x 1
175
175
2,917
2,917
6,179
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
6.9
10.8
–
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 920 x 740
1,650 x 1,220 x 740
65 x 36-1/4 x 29-3/16 65 x 48-1/16 x 29-3/16
High pressure sensor,
High pressure switch at 4.15 MPa (601 psi)
Over-heat protection,
Over-current protection
Over-heat protection
Over-current protection
R410A x 6.5 kg (15 lbs) R410A x 11.5 kg (26 lbs)
183 (404)
237 (523)
Salt-resistant cross fin & copper tube
9.52 (3/8) Brazed
15.88 (5/8) Brazed
22.2 (7/8) Brazed
28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y100VBK3
Joint: CMY-Y102SS/LS-G2,
CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
Model
Power source
Cooling capacity
(Nominal)
PUCY-P700YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
76.0
65,400
259,300
22.47
37.9-36.0-34.7
3.38
77.2
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
64.5
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
19.05 (3/4) Brazed
diameter
Gas pipe
mm (in.)
34.93 (1-3/8) Brazed
Set Model
Model
PUCY-P250YKA (-BS) PUCY-P450YKA (-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Air flow rate
m3/min
175
175
L/s
2,917
2,917
cfm
6,179
6,179
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
*2 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Motor output
kW
6.9
12.4
Case heater
kW
–
–
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
mm
1,650 x 920 x 740
1,650 x 1,220 x 740
in.
65 x 36-1/4 x 29-3/16 65 x 48-1/16 x 29-3/16
Protection
High pressure protection
High pressure sensor,
devices
High pressure switch at 4.15 MPa (601 psi)
Inverter circuit
Over-heat protection,
(COMP./FAN)
Over-current protection
Compressor
Over-heat protection Over-heat protection
Fan motor
Over-current protection
R410A x 6.5 kg (15 lbs) R410A x 11.5 kg (26 lbs)
Refrigerant
Type x original charge
Net weight
kg (lbs)
183 (404)
237 (523)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 9.52 (3/8) Brazed
15.88 (5/8) Brazed
and distributor
Gas pipe
mm (in.) 22.2 (7/8) Brazed
28.58 (1-1/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y200VBK2
Joint: CMY-Y102SS/LS-G2,
CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
PUCY-P750YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
81.5
70,100
278,100
24.47
41.3-39.2-37.8
3.33
82.8
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
PUCY-P800YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
88.0
75,700
300,300
25.43
42.9-40.7-39.3
3.46
89.4
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
65.5
66
19.05 (3/4) Brazed
34.93 (1-3/8) Brazed
19.05 (3/4) Brazed
34.93 (1-3/8) Brazed
PUCY-P300YKA (-BS) PUCY-P450YKA (-BS)
Propeller fan x 1
Propeller fan x 1
175
175
2,917
2,917
6,179
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
8.1
12.4
–
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 920 x 740
1,650 x 1,220 x 740
65 x 36-1/4 x 29-3/16 65 x 48-1/16 x 29-3/16
High pressure sensor,
High pressure switch at 4.15 MPa (601 psi)
Over-heat protection,
Over-current protection
Over-heat protection Over-heat protection
Over-current protection
R410A x 6.5 kg (15 lbs) R410A x 11.5 kg (26 lbs)
201 (444)
237 (523)
Salt-resistant cross fin & copper tube
12.7 (1/2) Brazed
15.88 (5/8) Brazed
22.2 (7/8) Brazed
28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y200VBK2
Joint: CMY-Y102SS/LS-G2,
CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
PUCY-P400YKA (-BS) PUCY-P400YKA (-BS)
Propeller fan x 1
Propeller fan x 1
175
175
2,917
2,917
6,179
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
10.8
10.8
–
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 1,220 x 740 1,650 x 1,220 x 740
65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16
High pressure sensor,
High pressure switch at 4.15 MPa (601 psi)
Over-heat protection,
Over-current protection
Over-heat protection Over-heat protection
Over-current protection
R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs)
237 (523)
237 (523)
Salt-resistant cross fin & copper tube
15.88 (5/8) Brazed
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y200VBK2
Joint: CMY-Y102SS/LS-G2,
CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
*1 Nominal cooling conditions (subject to JIS B8615-2)
*1 Nominal cooling conditions (subject to JIS B8615-2)
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 33
PUCY-P650YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
72.0
61,900
245,700
19.67
33.2-31.5-30.4
3.66
73.2
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 34
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-P YSKA(-BS)
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-P YSKA(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
Specifications
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
diameter
Gas pipe
mm (in.)
Set Model
Model
FAN
Type x Quantity
Air flow rate
m3/min
L/s
cfm
Control, Driving mechanism
Motor output
kW
*2 External static press.
Compressor
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External finish
PUCY-P850YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
92.0
79,100
313,900
28.37
47.8-45.4-43.8
3.24
93.5
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
PUCY-P900YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
96.0
82,600
327,600
31.47
53.1-50.4-48.6
3.05
97.6
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
66
66
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
PUCY-P400YKA (-BS)
PUCY-P450YKA (-BS)
PUCY-P450YKA (-BS)
PUCY-P450YKA (-BS)
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
175
175
175
175
2,917
2,917
2,917
2,917
6,179
6,179
6,179
6,179
Inverter-control, Direct-driven by motor
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
Inverter
10.8
12.4
12.4
12.4
–
–
–
–
Pre-coated galvanized steel sheets
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
mm
1,650 x 1,220 x 740
1,650 x 1,220 x 740
1,650 x 1,220 x 740
1,650 x 1,220 x 740
in.
65 x 48-1/16 x 29-3/16
65 x 48-1/16 x 29-3/16
65 x 48-1/16 x 29-3/16
65 x 48-1/16 x 29-3/16
High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi) High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Protection
devices
Inverter circuit
Over-heat protection,
Over-heat protection,
Over-heat protection,
Over-heat protection,
(COMP./FAN)
Over-current protection
Over-current protection
Over-current protection
Over-current protection
Compressor
Over-heat protection
Over-heat protection
Over-heat protection
Over-heat protection
Fan motor
Over-current protection
Over-current protection
Over-current protection
Thermal switch
Refrigerant
Type x original charge
R410A x 11.5 kg (26 lbs)
R410A x 11.5 kg (26 lbs)
R410A x 11.5 kg (26 lbs)
R410A x 11.5 kg (26 lbs)
Net weight
kg (lbs)
237 (523)
237 (523)
237 (523)
237 (523)
Heat exchanger
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.)
15.88 (5/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
and distributor
Gas pipe
mm (in.)
28.58 (1-1/8) Brazed
28.58 (1-1/8) Brazed
28.58 (1-1/8) Brazed
28.58 (1-1/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y200VBK2
Outdoor Twinning kit: CMY-Y200VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
Notes:
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
diameter
Gas pipe
mm (in.)
Set Model
Model
FAN
Type x Quantity
Air flow rate
m3/min
L/s
cfm
Control, Driving mechanism
Motor output
kW
*2 External static press.
Compressor
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External finish
External dimension HxWxD
Protection
devices
mm
in.
High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit Liquid pipe
and distributor
Gas pipe
Optional parts
mm (in.)
mm (in.)
PUCY-P950YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
104.0
89,400
354,800
35.13
59.3-56.3-54.3
2.96
105.7
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
PUCY-P1000YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
112.0
96,300
382,100
38.88
65.6-62.3-60.1
2.88
113.9
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
67.5
68
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
PUCY-P450YKA (-BS)
PUCY-P500YKA (-BS)
PUCY-P500YKA (-BS)
PUCY-P500YKA (-BS)
Propeller fan x 1
Propeller fan x 2
Propeller fan x 2
Propeller fan x 2
175
320
320
320
2,917
5,333
5,333
5,333
6,179
11,299
11,299
11,299
Inverter-control, Direct-driven by motor
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 2
0.92 x 2
0.92 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
Inverter
12.4
14.3
14.3
14.3
–
–
–
–
Pre-coated galvanized steel sheets
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
<MUNSELL 5Y 8/1 or similar>
1,650 x 1,220 x 740
1,650 x 1,750 x 740
1,650 x 1,750 x 740
1,650 x 1,750 x 740
65 x 48-1/16 x 29-3/16
65 x 68-15/16 x 29-3/16
65 x 68-15/16 x 29-3/16
65 x 68-15/16 x 29-3/16
High pressure sensor, High pressure switch at 4.15 MPa (601 psi) High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection, Over-current protection
Over-heat protection
Over-heat protection
Over-heat protection
Over-heat protection
Over-current protection
Over-current protection
Over-current protection
Over-current protection
R410A x 11.5 kg (26 lbs)
R410A x 11.8 kg (27 lbs)
R410A x 11.8 kg (27 lbs)
R410A x 11.8 kg (27 lbs)
237 (523)
305 (673)
305 (673)
305 (673)
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
15.88 (5/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed
28.58 (1-1/8) Brazed
28.58 (1-1/8) Brazed
28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y200VBK2
Outdoor Twinning kit: CMY-Y200VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
Notes:
*1 Nominal cooling conditions (subject to JIS B8615-2)
*1 Nominal cooling conditions (subject to JIS B8615-2)
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 35
Model
Power source
Cooling capacity
(Nominal)
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 36
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-P YSKA(-BS)
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-P YSKA(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
Specifications
PUCY-P1050YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
115.0
98,900
392,400
33.39
56.3-53.5-51.6
3.44
116.9
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
66.5
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
19.05 (3/4) Brazed
diameter
Gas pipe
mm (in.)
41.28 (1-5/8) Brazed
Set Model
Model
PUCY-P300YKA (-BS) PUCY-P300YKA (-BS) PUCY-P450YKA (-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Air flow rate
m3/min
175
175
175
L/s
2,917
2,917
2,917
cfm
6,179
6,179
6,179
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
0.92 x 1
*2 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
8.1
8.1
12.4
Case heater
kW
–
–
–
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
mm
1,650 x 920 x 740
1,650 x 920 x 740
1,650 x 1,220 x 740
in.
65 x 36-1/4 x 29-3/16 65 x 36-1/4 x 29-3/16 65 x 48-1/16 x 29-3/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
devices
Inverter circuit (COMP./FAN)
Over-heat protection, Over-current protection
Compressor
Over-heat protection
Fan motor
Over-current protection
Refrigerant
Type x original charge
R410A x 6.5 kg (15 lbs) R410A x 6.5 kg (15 lbs) R410A x 11.5 kg (26 lbs)
Net weight
kg (lbs)
201 (444)
201 (444)
237 (523)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 12.7 (1/2) Brazed
12.7 (1/2) Brazed
15.88 (5/8) Brazed
and distributor
Gas pipe
mm (in.) 22.2 (7/8) Brazed
22.2 (7/8) Brazed
28.58 (1-1/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
PUCY-P1100YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
121.5
104,500
414,600
35.21
59.4-56.4-54.4
3.45
123.5
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
66.5
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
PUCY-P300YKA (-BS) PUCY-P350YKA (-BS) PUCY-P450YKA (-BS)
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
175
175
175
2,917
2,917
2,917
6,179
6,179
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
8.1
10.4
12.4
–
–
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 920 x 740
1,650 x 1,220 x 740 1,650 x 1,220 x 740
65 x 36-1/4 x 29-3/16 65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Over-current protection
R410A x 6.5 kg (15 lbs) R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs)
201 (444)
237 (523)
237 (523)
Salt-resistant cross fin & copper tube
12.7 (1/2) Brazed
12.7 (1/2) Brazed
15.88 (5/8) Brazed
22.2 (7/8) Brazed
28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
PUCY-P1150YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
128.0
110,100
436,700
36.15
61.0-57.9-55.8
3.54
130.1
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
67.5
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
19.05 (3/4) Brazed
diameter
Gas pipe
mm (in.)
41.28 (1-5/8) Brazed
Set Model
Model
PUCY-P350YKA (-BS) PUCY-P400YKA (-BS) PUCY-P400YKA (-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Air flow rate
m3/min
175
175
175
L/s
2,917
2,917
2,917
cfm
6,179
6,179
6,179
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
0.92 x 1
*2 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
10.4
10.8
10.8
Case heater
kW
–
–
–
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
mm
1,650 x 1,220 x 740 1,650 x 1,220 x 740 1,650 x 1,220 x 740
in.
65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
devices
Inverter circuit (COMP./FAN)
Over-heat protection, Over-current protection
Compressor
Over-heat protection Over-heat protection Over-heat protection
Fan motor
Over-current protection
Refrigerant
Type x original charge
R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs)
Net weight
kg (lbs)
237 (523)
237 (523)
237 (523)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 12.7 (1/2) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
and distributor
Gas pipe
mm (in.) 28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
PUCY-P1200YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
132.0
113,500
450,400
38.15
64.4-61.1-58.9
3.46
134.2
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
68
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
PUCY-P400YKA (-BS) PUCY-P400YKA (-BS) PUCY-P400YKA (-BS)
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
175
175
175
2,917
2,917
2,917
6,179
6,179
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
10.8
10.8
10.8
–
–
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 1,220 x 740 1,650 x 1,220 x 740 1,650 x 1,220 x 740
65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection Over-heat protection Over-heat protection
Over-current protection
R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs)
237 (523)
237 (523)
237 (523)
Salt-resistant cross fin & copper tube
15.88 (5/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
*1 Nominal cooling conditions (subject to JIS B8615-2)
*1 Nominal cooling conditions (subject to JIS B8615-2)
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 37
Model
Power source
Cooling capacity
(Nominal)
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 38
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-P YSKA(-BS)
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-P YSKA(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
Specifications
PUCY-P1250YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
136.0
117,000
464,000
41.27
69.6-66.1-63.7
3.29
138.3
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
68
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
19.05 (3/4) Brazed
diameter
Gas pipe
mm (in.)
41.28 (1-5/8) Brazed
Set Model
Model
PUCY-P400YKA (-BS) PUCY-P400YKA (-BS) PUCY-P450YKA (-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Air flow rate
m3/min
175
175
175
L/s
2,917
2,917
2,917
cfm
6,179
6,179
6,179
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
0.92 x 1
*2 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter-control, Direct-driven by motor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
10.8
10.8
12.4
Case heater
kW
–
–
–
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
mm
1,650 x 1,220 x 740 1,650 x 1,220 x 740 1,650 x 1,220 x 740
in.
65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
devices
Inverter circuit (COMP./FAN)
Over-heat protection, Over-current protection
Compressor
Over-heat protection Over-heat protection Over-heat protection
Fan motor
Over-current protection
Refrigerant
Type x original charge
R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs)
Net weight
kg (lbs)
237 (523)
237 (523)
237 (523)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 15.88 (5/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
and distributor
Gas pipe
mm (in.) 28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
PUCY-P1300YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
140.0
120,400
477,700
44.82
75.6-71.8-69.2
3.12
142.3
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
68
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
PUCY-P400YKA (-BS) PUCY-P450YKA (-BS) PUCY-P450YKA (-BS)
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
175
175
175
2,917
2,917
2,917
6,179
6,179
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
10.8
12.4
12.4
–
–
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 1,220 x 740 1,650 x 1,220 x 740 1,650 x 1,220 x 740
65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection Over-heat protection Over-heat protection
Over-current protection
R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs)
237 (523)
237 (523)
237 (523)
Salt-resistant cross fin & copper tube
15.88 (5/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
diameter
Gas pipe
mm (in.)
Set Model
Model
FAN
Type x Quantity
Air flow rate
m3/min
L/s
cfm
Control, Driving mechanism
Motor output
kW
*2 External static press.
Compressor
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External finish
External dimension HxWxD
Protection
devices
mm
in.
High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit Liquid pipe
and distributor
Gas pipe
Optional parts
mm (in.)
mm (in.)
PUCY-P1350YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
144.0
123,800
491,300
48.39
81.6-77.6-74.8
2.97
146.4
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
68
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
PUCY-P450YKA (-BS)
PUCY-P450YKA (-BS)
PUCY-P450YKA (-BS)
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
175
175
175
2,917
2,917
2,917
6,179
6,179
6,179
Inverter-control, Direct-driven by motor
Inverter-control, Direct-driven by motor
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter scroll hermetic compressor
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
12.4
12.4
12.4
–
–
–
Pre-coated galvanized steel sheets
Pre-coated galvanized steel sheets
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
(+powder coating for -BS type)
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
<MUNSELL 5Y 8/1 or similar>
<MUNSELL 5Y 8/1 or similar>
1,650 x 1,220 x 740
1,650 x 1,220 x 740
1,650 x 1,220 x 740
65 x 48-1/16 x 29-3/16
65 x 48-1/16 x 29-3/16
65 x 48-1/16 x 29-3/16
High pressure sensor,
High pressure sensor,
High pressure sensor,
High pressure switch at 4.15 MPa (601 psi) High pressure switch at 4.15 MPa (601 psi) High pressure switch at 4.15 MPa (601 psi)
Over-heat protection, Over-current protection Over-heat protection, Over-current protection Over-heat protection, Over-current protection
Over-heat protection
Over-heat protection
Over-heat protection
Over-current protection
Over-current protection
Over-current protection
R410A x 11.5 kg (26 lbs)
R410A x 11.5 kg (26 lbs)
R410A x 11.5 kg (26 lbs)
237 (523)
237 (523)
237 (523)
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
15.88 (5/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed
28.58 (1-1/8) Brazed
28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
*1 Nominal cooling conditions (subject to JIS B8615-2)
*1 Nominal cooling conditions (subject to JIS B8615-2)
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 39
Model
Power source
Cooling capacity
(Nominal)
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 40
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-EP YSKA(-BS)
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-EP YSKA(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
Specifications
PUCY-EP400YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
44.8
38,500
152,900
11.18
18.8-17.9-17.2
4.00
45.5
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/1~34
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
60
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
12.7 (1/2) Brazed
diameter
Gas pipe
mm (in.)
28.58 (1-1/8) Brazed
Set Model
Model
PUCY-P200YKA (-BS) PUCY-P200YKA (-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Air flow rate
m3/min
175
175
L/s
2,917
2,917
cfm
6,179
6,179
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
*2 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Motor output
kW
5.5
5.5
Case heater
kW
–
–
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
mm
1,650 x 920 x 740
1,650 x 920 x 740
in.
65 x 36-1/4 x 29-3/16 65 x 36-1/4 x 29-3/16
Protection
High pressure protection
High pressure sensor,
devices
High pressure switch at 4.15 MPa (601 psi)
Inverter circuit
Over-heat protection,
(COMP./FAN)
Over-current protection
Compressor
Over-heat protection Over-heat protection
Fan motor
Thermal switch
Thermal switch
R410A x 5.5 kg (13 lbs) R410A x 5.5 kg (13 lbs)
Refrigerant
Type x original charge
Net weight
kg (lbs)
174 (384)
174 (384)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 9.52 (3/8) Brazed
9.52 (3/8) Brazed
and distributor
Gas pipe
mm (in.) 22.2 (7/8) Brazed
22.2 (7/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y100VBK3
Joint: CMY-Y102SS/LS-G2,
CMY-Y202S-G2
Header: CMY-Y104/108/1010-G
PUCY-EP450YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
50.4
43,300
172,000
12.59
21.2-20.1-19.4
4.00
51.2
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/1~39
60.5
61
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed
PUCY-P200YKA (-BS) PUCY-P250YKA (-BS)
Propeller fan x 1
Propeller fan x 1
175
175
2,917
2,917
6,179
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
5.5
6.9
–
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 920 x 740
1,650 x 920 x 740
65 x 36-1/4 x 29-3/16 65 x 36-1/4 x 29-3/16
High pressure sensor,
High pressure switch at 4.15 MPa (601 psi)
Over-heat protection,
Over-current protection
Over-heat protection Over-heat protection
Over-current protection
R410A x 5.5 kg (13 lbs) R410A x 6.5 kg (15 lbs)
174 (384)
183 (404)
Salt-resistant cross fin & copper tube
9.52 (3/8) Brazed
9.52 (3/8) Brazed
22.2 (7/8) Brazed
22.2 (7/8) Brazed
Outdoor Twinning kit: CMY-Y100VBK3
Joint: CMY-Y102SS/LS-G2,
CMY-Y202S-G2
Header: CMY-Y104/108/1010-G
PUCY-P250YKA (-BS) PUCY-P250YKA (-BS)
Propeller fan x 1
Propeller fan x 1
175
175
2,917
2,917
6,179
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
6.9
6.9
–
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 920 x 740
1,650 x 920 x 740
65 x 36-1/4 x 29-3/16 65 x 36-1/4 x 29-3/16
High pressure sensor,
High pressure switch at 4.15 MPa (601 psi)
Over-heat protection,
Over-current protection
Over-heat protection Over-heat protection
Over-current protection
R410A x 6.5 kg (15 lbs) R410A x 6.5 kg (15 lbs)
183 (404)
183 (404)
Salt-resistant cross fin & copper tube
9.52 (3/8) Brazed
9.52 (3/8) Brazed
22.2 (7/8) Brazed
22.2 (7/8) Brazed
Outdoor Twinning kit: CMY-Y100VBK3
Joint: CMY-Y102SS/LS-G2,
CMY-Y202S-G2
Header: CMY-Y104/108/1010-G
Notes:
Model
Power source
Cooling capacity
(Nominal)
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
diameter
Gas pipe
mm (in.)
Set Model
Model
FAN
Type x Quantity
Air flow rate
m3/min
L/s
cfm
Control, Driving mechanism
Motor output
kW
*2 External static press.
Compressor
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External finish
External dimension HxWxD
Protection
devices
mm
in.
High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit Liquid pipe
and distributor
Gas pipe
Optional parts
mm (in.)
mm (in.)
PUCY-EP650YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
73.5
63,200
250,800
19.74
33.3-31.6-30.5
3.72
74.7
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
PUCY-EP700YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
80.0
68,800
273,000
21.56
36.3-34.5-33.3
3.71
81.3
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
64
64
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed
19.05 (3/4) Brazed
34.93 (1-3/8) Brazed
PUCY-P300YKA (-BS)
PUCY-P350YKA (-BS)
PUCY-P350YKA (-BS)
PUCY-P350YKA (-BS)
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
175
175
175
175
2,917
2,917
2,917
2,917
6,179
6,179
6,179
6,179
Inverter-control, Direct-driven by motor
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
Inverter
8.1
10.4
10.4
10.4
–
–
–
–
Pre-coated galvanized steel sheets
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
<MUNSELL 5Y 8/1 or similar>
1,650 x 920 x 740
1,650 x 1,220 x 740
1,650 x 1,220 x 740
1,650 x 1,220 x 740
65 x 36-1/4 x 29-3/16
65 x 48-1/16 x 29-3/16
65 x 48-1/16 x 29-3/16
65 x 48-1/16 x 29-3/16
High pressure sensor, High pressure switch at 4.15 MPa (601 psi) High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection, Over-current protection
Over-heat protection
Over-heat protection
Over-heat protection
Over-heat protection
Over-current protection
Over-current protection
Over-current protection
Over-current protection
R410A x 6.5 kg (15 lbs)
R410A x 11.5 kg (26 lbs)
R410A x 11.5 kg (26 lbs)
R410A x 11.5 kg (26 lbs)
201 (444)
237 (523)
237 (523)
237 (523)
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
12.7 (1/2) Brazed
12.7 (1/2) Brazed
12.7 (1/2) Brazed
12.7 (1/2) Brazed
22.2 (7/8) Brazed
28.58 (1-1/8) Brazed
28.58 (1-1/8) Brazed
28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y100VBK3
Outdoor Twinning kit: CMY-Y200VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
Notes:
*1 Nominal cooling conditions (subject to JIS B8615-2)
*1 Nominal cooling conditions (subject to JIS B8615-2)
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 41
PUCY-EP500YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
56.0
48,200
191,100
14.16
23.9-22.7-21.8
3.95
56.9
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/1~43
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 42
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-EP YSKA(-BS)
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-EP YSKA(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
Specifications
PUCY-EP750YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
84.8
72,900
289,300
21.85
36.8-35.0-33.7
3.88
86.2
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
64
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
19.05 (3/4) Brazed
diameter
Gas pipe
mm (in.)
34.93 (1-3/8) Brazed
Set Model
Model
PUCY-P200YKA (-BS) PUCY-P200YKA (-BS) PUCY-P350YKA (-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Air flow rate
m3/min
175
175
175
L/s
2,917
2,917
2,917
cfm
6,179
6,179
6,179
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
0.92 x 1
*2 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter-control, Direct-driven by motor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
5.5
5.5
10.4
Case heater
kW
–
–
–
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
mm
1,650 x 920 x 740
1,650 x 920 x 740
1,650 x 1,220 x 740
in.
65 x 36-1/4 x 29-3/16 65 x 36-1/4 x 29-3/16 65 x 48-1/16 x 29-3/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
devices
Inverter circuit (COMP./FAN)
Over-heat protection, Over-current protection
Compressor
Over-heat protection Over-heat protection Over-heat protection
Fan motor
Over-current protection
Refrigerant
Type x original charge
R410A x 5.5 kg (13 lbs) R410A x 5.5 kg (13 lbs) R410A x 11.5 kg (26 lbs)
Net weight
kg (lbs)
174 (384)
174 (384)
237 (523)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 9.52 (3/8) Brazed
9.52 (3/8) Brazed
12.7 (1/2) Brazed
and distributor
Gas pipe
mm (in.) 22.2 (7/8) Brazed
22.2 (7/8) Brazed
28.58 (1-1/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
PUCY-EP800YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
90.4
77,700
308,400
23.33
39.3-37.4-36.0
3.87
91.9
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
64
19.05 (3/4) Brazed
34.93 (1-3/8) Brazed
PUCY-P200YKA (-BS) PUCY-P250YKA (-BS) PUCY-P350YKA (-BS)
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
175
175
175
2,917
2,917
2,917
6,179
6,179
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter-control, Direct-driven by motor
Inverter
Inverter
Inverter
5.5
6.9
10.4
–
–
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 920 x 740
1,650 x 920 x 740
1,650 x 1,220 x 740
65 x 36-1/4 x 29-3/16 65 x 36-1/4 x 29-3/16 65 x 48-1/16 x 29-3/16
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection Over-heat protection Over-heat protection
Over-current protection
R410A x 5.5 kg (13 lbs) R410A x 6.5 kg (15 lbs) R410A x 11.5 kg (26 lbs)
174 (384)
183 (404)
237 (523)
Salt-resistant cross fin & copper tube
9.52 (3/8) Brazed
9.52 (3/8) Brazed
12.7 (1/2) Brazed
22.2 (7/8) Brazed
22.2 (7/8) Brazed
28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
PUCY-EP850YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
96.0
82,600
327,600
24.80
41.8-39.7-38.3
3.87
97.6
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
64
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
19.05 (3/4) Brazed
diameter
Gas pipe
mm (in.)
41.28 (1-5/8) Brazed
Set Model
Model
PUCY-P250YKA (-BS) PUCY-P250YKA (-BS) PUCY-P350YKA (-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Air flow rate
m3/min
175
175
175
L/s
2,917
2,917
2,917
cfm
6,179
6,179
6,179
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
0.92 x 1
*2 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
6.9
6.9
10.4
Case heater
kW
–
–
–
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
mm
1,650 x 920 x 740
1,650 x 920 x 740
1,650 x 1,220 x 740
in.
65 x 36-1/4 x 29-3/16 65 x 36-1/4 x 29-3/16 65 x 48-1/16 x 29-3/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
devices
Inverter circuit (COMP./FAN)
Over-heat protection, Over-current protection
Compressor
Over-heat protection Over-heat protection Over-heat protection
Fan motor
Over-current protection
Refrigerant
Type x original charge
R410A x 6.5 kg (15 lbs) R410A x 6.5 kg (15 lbs) R410A x 11.5 kg (26 lbs)
Net weight
kg (lbs)
183 (404)
183 (404)
237 (523)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 9.52 (3/8) Brazed
9.52 (3/8) Brazed
12.7 (1/2) Brazed
and distributor
Gas pipe
mm (in.) 22.2 (7/8) Brazed
22.2 (7/8) Brazed
28.58 (1-1/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
PUCY-EP900YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
101.5
87,300
346,300
26.71
45.0-42.8-41.2
3.80
103.2
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
65
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
PUCY-P250YKA (-BS) PUCY-P300YKA (-BS) PUCY-P350YKA (-BS)
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
175
175
175
2,917
2,917
2,917
6,179
6,179
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
6.9
8.1
10.4
–
–
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 920 x 740
1,650 x 920 x 740
1,650 x 1,220 x 740
65 x 36-1/4 x 29-3/16 65 x 36-1/4 x 29-3/16 65 x 48-1/16 x 29-3/16
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection Over-heat protection Over-heat protection
Over-current protection
R410A x 6.5 kg (15 lbs) R410A x 6.5 kg (15 lbs) R410A x 11.5 kg (26 lbs)
183 (404)
201 (444)
237 (523)
Salt-resistant cross fin & copper tube
9.52 (3/8) Brazed
12.7 (1/2) Brazed
12.7 (1/2) Brazed
22.2 (7/8) Brazed
22.2 (7/8) Brazed
28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
*1 Nominal cooling conditions (subject to JIS B8615-2)
*1 Nominal cooling conditions (subject to JIS B8615-2)
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 43
Model
Power source
Cooling capacity
(Nominal)
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 44
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-EP YSKA(-BS)
OUTDOOR UNIT
Y Series - Cooling-only
PUCY-EP YSKA(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
Specifications
PUCY-EP950YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
107.0
92,000
365,100
28.68
48.4-45.9-44.3
3.73
108.8
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
66
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
19.05 (3/4) Brazed
diameter
Gas pipe
mm (in.)
41.28 (1-5/8) Brazed
Set Model
Model
PUCY-P300YKA (-BS) PUCY-P300YKA (-BS) PUCY-P350YKA (-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Air flow rate
m3/min
175
175
175
L/s
2,917
2,917
2,917
cfm
6,179
6,179
6,179
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
0.92 x 1
*2 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
8.1
8.1
10.4
Case heater
kW
–
–
–
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
mm
1,650 x 920 x 740
1,650 x 920 x 740
1,650 x 1,220 x 740
in.
65 x 36-1/4 x 29-3/16 65 x 36-1/4 x 29-3/16 65 x 48-1/16 x 29-3/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
devices
Inverter circuit (COMP./FAN)
Over-heat protection, Over-current protection
Compressor
Over-heat protection Over-heat protection Over-heat protection
Fan motor
Over-current protection
Refrigerant
Type x original charge
R410A x 6.5 kg (15 lbs) R410A x 6.5 kg (15 lbs) R410A x 11.5 kg (26 lbs)
Net weight
kg (lbs)
201 (444)
201 (444)
237 (523)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 12.7 (1/2) Brazed
12.7 (1/2) Brazed
12.7 (1/2) Brazed
and distributor
Gas pipe
mm (in.) 22.2 (7/8) Brazed
22.2 (7/8) Brazed
28.58 (1-1/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
PUCY-EP1000YSKA (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
113.5
97,600
387,300
30.51
51.5-48.9-47.1
3.72
115.4
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
66
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
PUCY-P300YKA (-BS) PUCY-P350YKA (-BS) PUCY-P350YKA (-BS)
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
175
175
175
2,917
2,917
2,917
6,179
6,179
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
8.1
10.4
10.4
–
–
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 920 x 740
1,650 x 1,220 x 740 1,650 x 1,220 x 740
65 x 36-1/4 x 29-3/16 65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection Over-heat protection Over-heat protection
Over-current protection
R410A x 6.5 kg (15 lbs) R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs)
201 (444)
237 (523)
237 (523)
Salt-resistant cross fin & copper tube
12.7 (1/2) Brazed
12.7 (1/2) Brazed
12.7 (1/2) Brazed
22.2 (7/8) Brazed
28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
PUCY-EP1050YSKA (-BS)
3-phase 4-wire 380-400-415 V 50/60 Hz
120.0
103,200
409,400
32.34
54.5-51.8-49.9
3.71
122.0
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
*1
kW
kcal/h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Cooling capacity
*3
kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
66
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
19.05 (3/4) Brazed
diameter
Gas pipe
mm (in.)
41.28 (1-5/8) Brazed
Set Model
Model
PUCY-P350YKA (-BS) PUCY-P350YKA (-BS) PUCY-P350YKA (-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Air flow rate
m3/min
175
175
175
L/s
2,917
2,917
2,917
cfm
6,179
6,179
6,179
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
0.92 x 1
*2 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
10.4
10.4
10.4
Case heater
kW
–
–
–
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
mm
1,650 x 1,220 x 740 1,650 x 1,220 x 740 1,650 x 1,220 x 740
in.
65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
devices
Inverter circuit (COMP./FAN)
Over-heat protection, Over-current protection
Compressor
Over-heat protection Over-heat protection Over-heat protection
Fan motor
Over-current protection
Refrigerant
Type x original charge
R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs)
Net weight
kg (lbs)
237 (523)
237 (523)
237 (523)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 12.7 (1/2) Brazed
12.7 (1/2) Brazed
12.7 (1/2) Brazed
and distributor
Gas pipe
mm (in.) 28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
PUCY-EP1100YSKA (-BS)
3-phase 4-wire 380-400-415 V 50/60 Hz
124.0
106,600
423,100
34.25
57.8-54.9-52.9
3.62
126.1
15.0~24.0°C (59~75°F)
10.0~52.0°C (50~126°F)
50~130% of outdoor unit capacity
P15~P250/2~50
67
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
PUCY-P350YKA (-BS) PUCY-P350YKA (-BS) PUCY-P400YKA (-BS)
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
175
175
175
2,917
2,917
2,917
6,179
6,179
6,179
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
10.4
10.4
10.8
–
–
–
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,650 x 1,220 x 740 1,650 x 1,220 x 740 1,650 x 1,220 x 740
65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16 65 x 48-1/16 x 29-3/16
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection Over-heat protection Over-heat protection
Over-current protection
R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs) R410A x 11.5 kg (26 lbs)
237 (523)
237 (523)
237 (523)
Salt-resistant cross fin & copper tube
12.7 (1/2) Brazed
12.7 (1/2) Brazed
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
*1 Nominal cooling conditions (subject to JIS B8615-2)
*1 Nominal cooling conditions (subject to JIS B8615-2)
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 45
Model
Power source
Cooling capacity
(Nominal)
Cooling
Indoor
Outdoor
Pipe length
Level difference
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
*2 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*3 Reference data under condition of Indoor: 27°CD.B./19.5°CW.B. (81°FD.B./67°FW.B.), Outdoor: 35°CD.B. (95°FD.B.)
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 46
OUTDOOR UNIT
S Series
PUMY-P VKM(-BS)
OUTDOOR UNIT
S Series
PUMY-P YKM(-BS)
Specifications
Specifications
Model
Power source
Cooling capacity
(Nominal)
PUMY-P112VKM(-BS)
1-phase 220-240V 50Hz
12.5
42,700
2.79
12.87-12.32-11.80
4.48
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
14.0
47,800
3.04
14.03-13.42-12.86
4.61
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P140 / 9
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor temp.
W.B.
cooling
Outdoor temp.
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor temp.
D.B.
heating
Outdoor temp.
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
diameter
Gas pipe
mm (in.)
FAN
Type x Quantity
Air flow rate
m3/min
L/s
cfm
Motor output
kW
Compressor
Type x Quantity
Starting method
Motor output
kW
External finish
External dimension HxWxD
Protection
devices
PUMY-P125VKM(-BS)
1-phase 220-240V 50Hz
14.0
47,800
3.46
15.97-15.27-14.64
4.05
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
16.0
54,600
3.74
17.26-16.51-15.82
4.28
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P140 / 10
49 / 51
50 / 52
51 / 53
9.52(3/8) Flare
15.88(5/8) Flare
Propeller Fan x 2
110
1,833
3,884
0.06 + 0.06
Scroll hermetic compressor x 1
Inverter
2.9
9.52(3/8) Flare
15.88(5/8) Flare
Propeller Fan x 2
110
1,833
3,884
0.06 + 0.06
Scroll hermetic compressor x 1
Inverter
3.5
9.52(3/8) Flare
15.88(5/8) Flare
Propeller Fan x 2
110
1,833
3,884
0.06 + 0.06
Scroll hermetic compressor x 1
Inverter
3.9
Galvanized Steel Sheet
Munsell No. 3Y 7.8/1.1
Galvanized Steel Sheet
Munsell No. 3Y 7.8/1.1
Galvanized Steel Sheet
Munsell No. 3Y 7.8/1.1
mm
1,338 x 1,050 x 330 (+25)
1,338 x 1,050 x 330 (+25)
1,338 x 1,050 x 330 (+25)
in.
52-11/16 x 41-11/32 x 13 (+1)
52-11/16 x 41-11/32 x 13 (+1)
52-11/16 x 41-11/32 x 13 (+1)
High pressure Switch
Overcurrent detection, Overheat detection
(Heatsink thermistor )
Compressor thermistor, Over current detection
Overheating, Voltage protection
R410A 4.8kg
123(272)
Cross Fin and Copper tube
Reversed refrigerant circuit
Joint: CMY-Y62-G-E
Header: CMY-Y64/68-G-E
High pressure Switch
Overcurrent detection, Overheat detection
(Heatsink thermistor )
Compressor thermistor, Over current detection
Overheating, Voltage protection
R410A 4.8kg
123(272)
Cross Fin and Copper tube
Reversed refrigerant circuit
Joint: CMY-Y62-G-E
Header: CMY-Y64/68-G-E
High pressure Switch
Overcurrent detection, Overheat detection
(Heatsink thermistor )
Compressor thermistor, Over current detection
Overheating, Voltage protection
R410A 4.8kg
123(272)
Cross Fin and Copper tube
Reversed refrigerant circuit
Joint: CMY-Y62-G-E
Header: CMY-Y64/68-G-E
High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Fan motor
Refrigerant
Type x original charge
Net weight
kg (lbs)
Heat exchanger
Defrosting method
Optional parts
Notes:
Model
Power source
Cooling capacity
(Nominal)
PUMY-P112YKM(-BS)
3-phase 380-415V 50Hz
12.5
42,700
2.79
4.46-4.24-4.09
4.48
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
14.0
47,800
3.04
4.86-4.62-4.45
4.61
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P140 / 9
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor temp.
W.B.
cooling
Outdoor temp.
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor temp.
D.B.
heating
Outdoor temp.
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
diameter
Gas pipe
mm (in.)
FAN
Type x Quantity
Air flow rate
m3/min
L/s
cfm
Motor output
kW
Compressor
Type x Quantity
Starting method
Motor output
kW
External finish
External dimension HxWxD
Protection
devices
PUMY-P125YKM(-BS)
3-phase 380-415V 50Hz
14.0
47,800
3.46
5.53-5.26-5.07
4.05
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
16.0
54,600
3.74
5.98-5.68-5.48
4.28
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P140 / 10
PUMY-P140YKM(-BS)
3-phase 380-415V 50Hz
15.5
52,900
4.52
7.23-6.87-6.62
3.43
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
18.0
61,400
4.47
7.15-6.79-6.55
4.03
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P140 / 12
49 / 51
50 / 52
51 / 53
9.52(3/8) Flare
15.88(5/8) Flare
Propeller Fan x 2
110
1,833
3,884
0.06 + 0.06
Scroll hermetic compressor x 1
Inverter
2.9
9.52(3/8) Flare
15.88(5/8) Flare
Propeller Fan x 2
110
1,833
3,884
0.06 + 0.06
Scroll hermetic compressor x 1
Inverter
3.5
9.52(3/8) Flare
15.88(5/8) Flare
Propeller Fan x 2
110
1,833
3,884
0.06 + 0.06
Scroll hermetic compressor x 1
Inverter
3.9
Galvanized Steel Sheet
Munsell No. 3Y 7.8/1.1
Galvanized Steel Sheet
Munsell No. 3Y 7.8/1.1
Galvanized Steel Sheet
Munsell No. 3Y 7.8/1.1
mm
1,338 x 1,050 x 330 (+25)
1,338 x 1,050 x 330 (+25)
1,338 x 1,050 x 330 (+25)
in.
52-11/16 x 41-11/32 x 13 (+1)
52-11/16 x 41-11/32 x 13 (+1)
52-11/16 x 41-11/32 x 13 (+1)
High pressure Switch
Overcurrent detection, Overheat detection
(Heatsink thermistor )
Compressor thermistor, Over current detection
Overheating, Voltage protection
R410A 4.8kg
125(276)
Cross Fin and Copper tube
Reversed refrigerant circuit
Joint: CMY-Y62-G-E
Header: CMY-Y64/68-G-E
High pressure Switch
Overcurrent detection, Overheat detection
(Heatsink thermistor )
Compressor thermistor, Over current detection
Overheating, Voltage protection
R410A 4.8kg
125(276)
Cross Fin and Copper tube
Reversed refrigerant circuit
Joint: CMY-Y62-G-E
Header: CMY-Y64/68-G-E
High pressure Switch
Overcurrent detection, Overheat detection
(Heatsink thermistor )
Compressor thermistor, Over current detection
Overheating, Voltage protection
R410A 4.8kg
125(276)
Cross Fin and Copper tube
Reversed refrigerant circuit
Joint: CMY-Y62-G-E
Header: CMY-Y64/68-G-E
High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Fan motor
Refrigerant
Type x original charge
Net weight
kg (lbs)
Heat exchanger
Defrosting method
Optional parts
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*Nominal condition *1,*2 are subject to ISO 15042.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 47
PUMY-P140VKM(-BS)
1-phase 220-240V 50Hz
15.5
52,900
4.52
20.86-19.95-19.12
3.43
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
18.0
61,400
4.47
20.63-19.73-18.91
4.03
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P140 / 12
*Nominal condition *1,*2 are subject to ISO 15042.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 48
OUTDOOR UNIT
Y Series
PUHY-P YHA(-BS)
OUTDOOR UNIT
Y Series
PUHY-P YHA(-BS)
Specifications
Specifications
PUHY-P200YHA(-BS)
Power source
*1
Cooling capacity
kW
*1 BTU/h
(Nominal)
kW
Power input
A
Current input
EER (kW/kW)
*3
Cooling capacity
kW
Temp.
W.B.
Indoor
range of
D.B.
Outdoor
cooling
*2
Heating capacity
kW
*2 BTU/h
(Nominal)
kW
Power input
A
Current input
COP (kW/kW)
Temp.
Indoor temp. D.B.
range
Outdoor temp. W.B.
of heating
Indoor unit Total capacity
connectable Model/Quantity
Sound pressure level
dB<A>
(measured in anechoic room)
Power pressure level
dB<A>
(measured in anechoic room)
Diameter of
Liquid
mm(in.)
refrigerant pipe
Gas
mm(in.)
External finish
External dimension H x W x D
mm
in.
kg(lbs)
Net weight
Heat exchanger
Type
Compressor Starting method
Motor output
kW
m3/min
Air flow rate
L/s
FAN
cfm
Type x Quantity
Motor output
kW
High pressure protection
Protection
Inverter circuit
devices
Fan motor
Refrigerant Type x Original charge
Optional parts
PUHY-P250YHA(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
PUHY-P300YHA(-BS)
28.0
95,500
7.73
13.0-12.3-11.9
3.62
28.5
15~24°C(59~75°F)
33.5
114,300
9.07
15.3-14.5-14.0
3.69
34.1
22.4
76,400
5.72
9.6-9.1-8.8
3.91
22.8
- 5~46°C(23~115°F)
25.0
85,300
6.03
10.1-9.6-9.3
4.14
31.5
107,500
7.83
13.2-12.5-12.1
4.02
15~27°C(59~81°F)
37.5
128,000
9.39
15.8-15.0-14.5
3.99
-20~15.5°C(-4~60°F)
P15~P250 / 1~17
50~130% of outdoor unit capacity
P15~P250 / 1~21
P15~P250 / 1~26
56
57
59
76
77
79
ø9.52 (ø3/8) Brazed
ø9.52 (ø3/8) Brazed
(ø12.7 (ø1/2) Brazed , total length>=40m)
(ø12.7 (ø1/2) Brazed , total length >=90m)
ø22.2 (ø7/8) Brazed
ø19.05 (ø3/4) Brazed
ø22.2 (ø7/8) Brazed
Pre-coated galvanized steel sheets (+ powder coating for-BS type) <MUNSELL 3.0Y 7.8/11 or similar>
1,650 x 920 x 760
1,650 x 920 x 760
1,650 x 920 x 760
65 x 36-1/4 x 29-15/16
65 x 36-1/4 x 29-15/16
65 x 36-1/4 x 29-15/16
215 (474)
185 (408)
200 (441)
Salt-resistant cross fin & copper tube
Inverter scroll hermetic compressor
Inverter
8.2
6.7
5.4
185
185
185
3,083
3,083
3,083
6,532
6,532
6,532
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
0.92 x 1
0.92 x 1
0.92 x 1
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
Thermal switch
R410A x 9.0kg (20 lbs)
R410A x 9.0kg (20 lbs)
R410A x 6.5kg (15 lbs)
joint : CMY-Y102SS / LS-G2
joint : CMY-Y102SS-G2
Header : CMY-Y104 / 108 / 1010-G
Header : CMY-Y104 / 108 / 1010-G
ø9.52 (ø3/8) Brazed
Notes:
External dimension H x W x D
40.0
136,500
11.20
18.9-17.9-17.3
3.57
40.7
PUHY-P400YHA(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
45.0
153,500
13.23
22.3-21.2-20.4
3.40
45.8
15~24°C (59~75°F)
PUHY-P450YHA(-BS)
50.0
170,600
16.66
28.1-26.7-25.7
3.00
50.9
- 5~46°C (23~115°F)
52.0
177,400
15.85
26.7-25.4-24.5
3.28
50.0
170,600
13.47
22.7-21.6-20.8
3.71
15~27°C (59~81°F)
45.0
153,500
12.09
20.4-19.3-18.6
3.72
-20~15.5°C (-4~60°F)
P15~P250 / 1~30
50~130% of outdoor unit capacity
P15~P250 / 1~34
P15~P250 / 1~39
60
61
62
80
81
82
ø15.88 (ø5/8) Brazed
ø12.7 (ø1/2) Brazed
ø12.7 (ø1/2) Brazed
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
Pre-coated galvanized steel sheets (+ powder coating for-BS type) <MUNSELL 3.0Y 7.8/11 or similar>
1,650 x 1,220 x 760
1,650 x 1,220 x 760
1,650 x 1,220 x 760
65 x 48-1/16 x 29-15/16
65 x 48-1/16 x 29-15/16
65 x 48-1/16 x 29-15/16
245 (541)
245 (541)
245 (541)
Salt-resistant cross fin & copper tube
Inverter scroll hermetic compressor
Inverter
12.0
10.5
10.3
225
225
225
3,750
3,750
3,750
7,945
7,945
7,945
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
0.92 x 1
0.92 x 1
0.92 x 1
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
Thermal switch
R410A x 11.5kg (26 lbs)
R410A x 11.5kg (26 lbs)
R410A x 11.5kg (26 lbs)
joint : CMY-Y102SS / LS-G2, CMY-Y202S-G2
Header : CMY-Y104 / 108 / 1010-G
mm
in.
kg(lbs)
Net weight
Heat exchanger
Type
Compressor Starting method
Motor output
kW
m3/min
L/s
FAN
cfm
Type x Quantity
Motor output
kW
High pressure protection
Protection
Inverter circuit
devices
Fan motor
Refrigerant Type x Original charge
Air flow rate
Optional parts
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*3 Reference data under condition of Indoor 27°C DB/19.5°C WB(81°F DB/67°F WB) Outdoor 35°C DB(95°F DB)
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 49
PUHY-P350YHA(-BS)
Power source
*1
Cooling capacity
kW
*1 BTU/h
(Nominal)
Power input
kW
Current input
A
EER (kW/kW)
*3
Cooling capacity
kW
Indoor
Temp.
W.B.
range of
Outdoor
D.B.
cooling
*2
Heating capacity
kW
*2 BTU/h
(Nominal)
Power input
kW
Current input
A
COP (kW/kW)
Indoor temp. D.B.
Temp.
range
Outdoor temp. W.B.
of heating
Indoor unit Total capacity
connectable Model/Quantity
Sound pressure level
dB<A>
(measured in anechoic room)
Power pressure level
dB<A>
(measured in anechoic room)
Liquid
Diameter of
mm(in.)
refrigerant pipe Gas
mm(in.)
External finish
*3 Reference data under condition of Indoor 27°C DB/19.5°C WB(81°F DB/67°F WB) Outdoor 35°C DB(95°F DB)
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 50
OUTDOOR UNIT
Y Series
PUHY-P YSHA(-BS)
OUTDOOR UNIT
Y Series
PUHY-P YSHA(-BS)
Specifications
Set name
Power source
kW
Cooling capacity
*1
(Nominal)
*1 BTU/h
Power input
kW
Current input
A
EER (kW / kW)
kW
Cooling capacity
*3
Indoor
W.B.
Temp.
range of
Outdoor
D.B.
cooling
kW
Heating capacity
*2
(Nominal )
*2 BTU/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor temp. D.B.
Temp.
range
Outdoor temp. W.B.
of heating
Indoor unit Total capacity
connectable Model/Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Liquid
Diameter of
mm(in.)
refrigerant pipe Gas
mm(in.)
Specifications
PUHY-P500YSHA(-BS)
PUHY-P550YSHA(-BS)
PUHY-P600YSHA(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
69.0
63.0
235,400
215,000
18.75
18.36
31.6-30.0-28.9
30.9-29.4-28.3
3.68
3.43
70.2
64.1
15~24°C (59~75°F)
56.0
191,100
16.47
27.8-26.4-25.4
3.40
57.0
PUHY-P650YSHA(-BS)
73.0
249,100
20.79
35.0-33.3-32.1
3.51
74.2
- 5~46°C (23~115°F)
76.5
69.0
261,000
235,400
19.92
18.06
33.6-31.9-30.7
30.4-28.9-27.9
3.84
3.82
15~27°C (59~81°F)
63.0
215,000
16.40
27.6-26.3-25.3
3.84
81.5
278,100
21.90
36.9-35.1-33.8
3.72
-20~15.5°C (-4~60°F)
50~130% of outdoor unit capacity
P15~P250 / 1~50
P15~P250 / 1~47
P15~P250 / 1~43
P15~P250 / 1~50
60
61
62
62.5
80
81
82
82.5
ø15.88 (ø5/8) Brazed
ø15.88 (ø5/8) Brazed
ø15.88 (ø5/8) Brazed
ø15.88 (ø5/8) Brazed
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
PUHY-P250YHA PUHY-P250YHA PUHY-P250YHA PUHY-P300YHA PUHY-P250YHA PUHY-P350YHA PUHY-P300YHA PUHY-P350YHA
Outdoor unit 1 and Outdoor unit 2
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
External finish
Pre-coated galvanized steel sheets (+ powder coating for-BS type) <MUNSELL 3.0Y 7.8/11 or similar>
mm
1,650 x 920x 760 1,650 x 920 x 760 1,650 x 920 x 760 1,650 x 920 x 760 1,650 x 920 x 760 1,650 x 1,220 x 760 1,650 x 920 x 760 1,650 x 1,220 x 760
External dimension H x W x D
in.
65 x 36-1/4 x 29-15/16 65 x 36-1/4 x 29-15/16 65 x 36-1/4 x 29-15/16 65 x 36-1/4 x 29-15/16 65 x 36-1/4 x 29-15/16 65 x 48-1/16 x 29-15/16 65 x 36-1/4 x 29-15/16 65 x 48-1/16 x 29-15/16
Net weight
kg(lbs)
215 (474)
215 (474)
245 (541)
200 (441)
200 (441)
200 (441)
200 (441)
245 (541)
Salt-resistant cross fin & copper tube
Heat exchanger
Type
Inverter scroll hermetic compressor
Inverter
Compressor Starting method
Motor output
kW
8.2
10.3
8.2
6.7
6.7
6.7
6.7
10.3
m3/min
185
225
185
185
185
185
185
225
Air flow rate
L/s
3,083
3,750
3,083
3,083
3,083
3,083
3,083
3,750
FAN
cfm
6,532
7,945
6,532
6,532
6,532
6,532
6,532
7,945
Type x Quantity
Propeller fan x 1 Propeller fan x 1 Propeller fan x 1 Propeller fan x 1 Propeller fan x 1 Propeller fan x 1 Propeller fan x 1 Propeller fan x 1
Motor output
kW
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
High pressure protection
Protection
Over-current protection
Inverter circuit
devices
Fan motor
Thermal switch Thermal switch Thermal switch Thermal switch Thermal switch Thermal switch Thermal switch Thermal switch
Refrigerant Type x Original charge
Pipe between Liquid
unit distributor Gas
mm(in.)
mm(in.)
Optional parts
R410A x 9.0kg R410A x 9.0kg R410A x 9.0kg R410A x 9.0kg R410A x 9.0kg R410A x 11.5kg R410A x 9.0kg R410A x 11.5kg
(20 lbs)
(26 lbs)
(20 lbs)
(20 lbs)
(20 lbs)
(20 lbs)
(20 lbs)
(26 lbs)
ø9.52 (ø3/8) Brazed ø12.7 (ø1/2) Brazed ø9.52 (ø3/8) Brazed ø12.7 (ø1/2) Brazed ø12.7 (ø1/2) Brazed ø12.7 (ø1/2) Brazed
ø9.52 (ø3/8) Brazed
ø22.2 (ø7/8) Brazed ø22.2 (ø7/8) Brazed ø22.2 (ø7/8) Brazed ø28.58 (ø1-1/8) Brazed ø22.2 (ø7/8) Brazed ø28.58 (ø1-1/8) Brazed
ø22.2 (ø7/8) Brazed
Outdoor Twinning Kit : CMY-Y100VBK2
Outdoor Twinning Kit : CMY-Y100VBK2
joint : CMY-Y102SS / LS-G2, CMY-Y202S-G2
joint : CMY-Y102SS / LS-G2, CMY-Y202S / 302S-G2
Header : CMY-Y104 / 108 / 1010-G
Header : CMY-Y104 / 108 / 1010-G
Notes:
Outdoor Twinning Kit : CMY-Y200VBK2
joint : CMY-Y102SS / LS-G2, CMY-Y202S / 302S-G2
Header : CMY-Y104 / 108 / 1010-G
Optional parts
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*3 Reference data under condition of Indoor 27°C DB/19.5°C WB(81°F DB/67°F WB) Outdoor 35°C DB(95°F DB)
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 51
Set name
PUHY-P700YSHA(-BS)
PUHY-P750YSHA(-BS)
PUHY-P800YSHA(-BS)
Power source
3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity
85.0
90.0
*1
80.0
kW
(Nominal)
290,000
307,100
*1 BTU/h
273,000
25.07
27.69
22.47
Power input
kW
42.3-40.2-38.7
46.7-44.4-42.8
37.9-36.0-34.7
Current input
A
3.39
3.25
3.56
EER (kW/kW)
Cooling capacity
86.4
91.5
81.4
*3
kW
Temp.
15~24°C (59~75°F)
Indoor
W.B.
range of
- 5~46°C (23~115°F)
Outdoor
D.B.
cooling
Heating capacity
95.0
100.0
88.0
*2
kW
(Nominal)
324,100
341,200
300,300
*2 BTU/h
25.46
25.70
23.71
Power input
kW
42.9-40.8-39.3
43.3-41.2-39.7
40.0-38.0-36.6
Current input
A
3.73
3.89
3.71
COP (kW/kW)
Temp.
Indoor temp. D.B.
15~27°C (59~81°F)
range
Outdoor temp. W.B.
-20~15.5°C (-4~60°F)
of heating
Indoor unit Total capacity
50~130% of outdoor unit capacity
connectable Model/Quantity
P15~P250 / 1~50
P15~P250 / 1~50
P15~P250 / 1~50
Sound pressure level
63.5
64
63
dB<A>
(measured in anechoic room)
Power pressure level
83.5
83
84
dB<A>
(measured in anechoic room)
ø19.05 (ø3/4) Brazed
ø19.05 (ø3/4) Brazed
Diameter of
Liquid
ø19.05 (ø3/4) Brazed
mm(in.)
ø34.93 (ø1-3/8) Brazed
ø34.93 (ø1-3/8) Brazed
refrigerant pipe Gas
ø34.93 (ø1-3/8) Brazed
mm(in.)
Outdoor unit 1 and Outdoor unit 2 PUHY-P350YHA(-BS) PUHY-P350YHA(-BS) PUHY-P350YHA(-BS) PUHY-P400YHA(-BS) PUHY-P350YHA(-BS) PUHY-P450YHA(-BS)
External finish
Pre-coated galvanized steel sheets (+ powder coating for-BS type) <MUNSELL 3.0Y 7.8/11 or similar>
mm
1,650 x 1,220 x 760 1,650 x 1,220 x 760 1,650 x 1,220 x 760 1,650 x 1,220 x 760 1,650 x 1,220 x 760 1,650 x 1,220 x 760
External dimension H x W x D
in.
65 x 48-1/16 x 29-15/16
65 x 48-1/16 x 29-15/16
65 x 48-1/16 x 29-15/16
65 x 48-1/16 x 29-15/16
65 x 48-1/16 x 29-15/16
65 x 48-1/16 x 29-15/16
Net weight
kg(lbs)
245 (541)
245 (541)
245 (541)
245 (541)
245 (541)
245 (541)
Salt-resistant cross fin & copper tube
Heat exchanger
Inverter scroll hermetic compressor
Type
Inverter
Compressor Starting method
Motor output
kW
10.3
10.3
10.5
10.3
10.3
12.0
m3/min
225
225
225
225
225
225
Air flow rate
L/s
3,750
3,750
3,750
3,750
3,750
3,750
FAN
cfm
7,945
7,945
7,945
7,945
7,945
7,945
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Motor output
kW
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
High pressure protection
Protection
Over-current protection
Inverter circuit
devices
Fan motor
Thermal switch
Thermal switch
Thermal switch
Thermal switch
Thermal switch
Thermal switch
R410A x 11.5kg
R410A x 11.5kg
R410A x 11.5kg
R410A x 11.5kg
R410A x 11.5kg
R410A x 11.5kg
Refrigerant Type x Original charge
(26 lbs)
(26 lbs)
(26 lbs)
(26 lbs)
(26 lbs)
(26 lbs)
ø12.7 (ø1/2) Brazed ø15.88 (ø5/8) Brazed ø12.7 (ø1/2) Brazed ø15.88 (ø5/8) Brazed
mm(in.)
Pipe between Liquid
ø12.7 (ø1/2) Brazed
ø28.58 (ø1-1/8) Brazed ø28.58 (ø1-1/8) Brazed ø28.58 (ø1-1/8) Brazed ø28.58 (ø1-1/8) Brazed
mm(in.)
unit distributor Gas
ø28.58 (ø1-1/8) Brazed
*3 Reference data under condition of Indoor 27°C DB/19.5°C WB(81°F DB/67°F WB) Outdoor 35°C DB(95°F DB)
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 52
OUTDOOR UNIT
Y Series
PUHY-P YSHA
Specifications (-BS)
OUTDOOR UNIT
Y Series
PUHY-P YSHA(-BS)
Specifications
Set name
Power source
Cooling capacity
(Nominal)
PUHY-P850YSHA(-BS)
*1
kW
*1 BTU/h
kW
Power input
A
Current input
EER (kW/kW)
Cooling capacity
*3
kW
Temp.
W.B.
Indoor
range of
D.B.
Outdoor
cooling
*2
Heating capacity
*2
kW
(Nominal)
BTU/h
kW
Power input
A
Current input
COP (kW/kW)
Temp.
Indoor temp. D.B.
range
Outdoor temp. W.B.
of heating
Indoor unit Total capacity
connectable Model/Quantity
Sound pressure level
dB<A>
(measured in anechoic room)
Power pressure level
dB<A>
(measured in anechoic room)
Diameter of
mm(in.)
Liquid
refrigerant pipe Gas
mm(in.)
Outdoor unit 1 and Outdoor unit 2
External finish
mm
External dimension H x W x D
in.
Net weight
kg(lbs)
Heat exchanger
Compressor
FAN
Protection
devices
Refrigerant
Pipe between
unit distributor
PUHY-P900YSHA(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
Type
Starting method
kW
Motor output
m3/min
L/s
Air flow rate
cfm
Type x Quantity
kW
Motor output
High pressure protection
Inverter circuit
Fan motor
Type x Original charge
mm(in.)
Liquid
mm(in.)
Gas
96.0
327,600
30.90
52.1-49.5-47.7
3.10
97.6
101.0
344,600
34.12
57.5-54.7-52.7
2.96
102.7
15~24°C (59~75°F)
- 5~46°C (23~115°F)
102.0
348,000
29.82
50.3-47.8-46.0
3.42
104.0
354,800
31.7
53.5-50.8-49.0
3.28
15~27°C (59~81°F)
-20~15.5°C (-4~60°F)
50~130% of outdoor unit capacity
P15~P250 / 1~50
P15~P250 / 1~50
64.5
65
84.5
85
ø19.05 (ø3/4) Brazed
ø19.05 (ø3/4) Brazed
ø41.28 (ø1-5/8) Brazed
ø41.28 (ø1-5/8) Brazed
PUHY-P400YHA(-BS)
PUHY-P450YHA(-BS)
PUHY-P450YHA(-BS)
PUHY-P450YHA(-BS)
Pre-coated galvanized steel sheets (+ powder coating for-BS type) <MUNSELL 3.0Y 7.8/11 or similar>
1,650 x 1,220 x 760
1,650 x 1,220 x 760
1,650 x 1,220 x 760
1,650 x 1,220 x 760
65 x 48-1/16 x 29-15/16
65 x 48-1/16 x 29-15/16
65 x 48-1/16 x 29-15/16
65 x 48-1/16 x 29-15/16
245 (541)
245 (541)
245 (541)
245 (541)
10.5
225
3,750
7,945
Propeller fan x 1
0.92 x 1
Thermal switch
R410A x 11.5kg (26 lbs)
Salt-resistant cross fin & copper tube
Inverter scroll hermetic compressor
Inverter
12.0
12.0
225
225
3,750
3,750
7,945
7,945
Propeller fan x 1
Propeller fan x 1
0.92 x 1
0.92 x 1
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
R410A x 11.5kg (26 lbs)
R410A x 11.5kg (26 lbs)
ø15.88 (ø5/8) Brazed
ø28.58 (ø1-1/8) Brazed
Outdoor Twinning kit : CMY-Y200VBK2
joint : CMY-Y102SS / LS-G2, CMY-Y202S / 302S-G2
Header : CMY-Y104 / 108 / 1010-G
Optional parts
12.0
225
3,750
7,945
Propeller fan x 1
0.92 x 1
Thermal switch
R410A x 11.5kg (26 lbs)
PUHY-P950YSHA(-BS)
Set name
Power source
Cooling capacity
(Nominal)
118.0
402,600
33.90
57.2-54.3-52.4
3.48
120.0
127.0
433,300
33.15
55.9-53.1-51.2
3.83
15~27°C (59~81°F)
132.0
450,400
35.01
59.1-56.1-54.1
3.77
-20~15.5°C (-4~60°F)
P15~P250 / 1~50
50~130% of outdoor unit capacity
P15~P250 / 2~50
P15~P250 / 2~50
64
64.5
65
84
84.5
85
ø19.05 (ø3/4) Brazed
ø41.28 (ø1-5/8) Brazed
ø19.05 (ø3/4) Brazed
ø41.28 (ø1-5/8) Brazed
ø19.05 (ø3/4) Brazed
ø41.28 (ø1-5/8) Brazed
PUHY
-P250YHA
(-BS)
PUHY
-P300YHA
(-BS)
PUHY
-P400YHA
(-BS)
PUHY
-P300YHA
(-BS)
PUHY
-P300YHA
(-BS)
PUHY
-P400YHA
(-BS)
PUHY
-P300YHA
(-BS)
PUHY
-P350YHA
(-BS)
PUHY
-P400YHA
(-BS)
Pre-coated galvanized steel sheets (+ powder coating for-BS type) <MUNSELL 3.0Y 7.8/11 or similar>
External dimension
HxWxD
Net weight
mm
1,650 x 920 x 760 1,650 x 920 x 760 1,650 x 1,220 x 760 1,650 x 920 x 760 1,650 x 920 x 760 1,650 x 1,220 x 760 1,650 x 920 x 760 1,650 x 1,220 x 760 1,650 x 1,220 x 760
in.
kg(lbs)
Heat exchanger
Type
Compressor Starting method
kW
Motor output
m3/min
L/s
Air flow rate
FAN
cfm
Type x Quantity
kW
Motor output
High pressure protection
Protection
Inverter circuit
devices
Fan motor
Refrigerant Type x Original charge
mm(in.)
mm(in.)
Optional parts
65 x 36-1/4
65 x 36-1/4
65 x 48-1/16
65 x 36-1/4
65 x 36-1/4
65 x 48-1/16
65 x 36-1/4
65 x 48-1/16
65 x 48-1/16
x 29-15/16
x 29-15/16
x 29-15/16
x 29-15/16
x 29-15/16
x 29-15/16
x 29-15/16
x 29-15/16
x 29-15/16
200
(441)
215
(474)
245
(541)
215
215
245
215
245
245
(474)
(474)
(541)
(474)
(541)
(541)
Salt-resistant cross fin & copper tube
Inverter scroll hermetic compressor
Inverter
6.7
8.2
10.5
8.2
8.2
8.2
10.3
10.5
10.5
185
185
225
185
185
185
225
225
225
3,083
3,083
3,750
3,083
3,083
3,083
3,750
3,750
3,750
6,532
6,532
7,945
6,532
6,532
6,532
7,945
7,945
7,945
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Over-current protection
Thermal switch Thermal switch Thermal switch Thermal switch Thermal switch Thermal switch Thermal switch Thermal switch Thermal switch
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
x 9.0kg
x 9.0kg
x 11.5kg
x 9.0kg
x 9.0kg
x 9.0kg
x 11.5kg
x 11.5kg
x 11.5kg
(26 lbs)
(26 lbs)
(26 lbs)
(20 lbs)
(20 lbs)
(20 lbs)
(20 lbs)
(20 lbs)
(26 lbs)
ø12.7 (ø1/2) Brazed
ø9.52 (ø3/8) Brazed ø12.7 (ø1/2) Brazed ø15.88 (ø5/8) Brazed
ø15.88 (ø5/8) Brazed ø12.7 (ø1/2) Brazed ø12.7 (ø1/2) Brazed ø15.88 (ø5/8) Brazed
ø22.2 (ø7/8) Brazed
ø22.2 (ø7/8) Brazed ø22.2 (ø7/8) Brazed ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed ø22.2 (ø7/8) Brazed ø28.58 (ø1-1/8) Brazed ø28.58 (ø1-1/8) Brazed
Outdoor Twinning kit : CMY-Y300VBK2
joint : CMY-Y102SS / LS-G2, CMY-Y202S / 302S-G2
Header : CMY-Y104 / 108 / 1010-G
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*3 Reference data under condition of Indoor 27°C DB/19.5°C WB(81°F DB/67°F WB) Outdoor 35°C DB(95°F DB)
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 53
PUHY-P1050YSHA(-BS)
- 5~46°C (23~115°F)
119.5
407,700
30.02
50.6-48.1-46.4
3.98
External finish
Pipe between Liquid
unit distributor Gas
Notes:
108.0
368,500
30.68
51.7-49.2-47.4
3.52
109.8
*1
kW
*1 BTU/h
kW
Power input
A
Current input
EER (kW/kW)
Cooling capacity
*3
kW
Temp.
W.B.
Indoor
range of
D.B.
Outdoor
cooling
Heating capacity
*2
kW
(Nominal )
*2 BTU/h
kW
Power input
A
Current input
COP (kW/kW)
Temp.
Indoor temp. D.B.
range
Outdoor temp. W.B.
of heating
Indoor unit Total capacity
connectable Model/Quantity
Sound pressure level
dB<A>
(measured in anechoic room)
Power pressure level
dB<A>
(measured in anechoic room)
Diameter of
mm(in.)
Liquid
refrigerant pipe Gas
mm(in.)
Outdoor unit 1 , Outdoor unit 2 ,
and Outdoor unit 3
PUHY-P1000YSHA(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
113.0
385,600
32.47
54.8-52.0-50.1
3.48
114.9
15~24°C (59~75°F)
*3 Reference data under condition of Indoor 27°C DB/19.5°C WB(81°F DB/67°F WB) Outdoor 35°C DB(95°F DB)
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 54
OUTDOOR UNIT
Y Series
PUHY-P YSHA(-BS)
OUTDOOR UNIT
Y Series
PUHY-P YSHA(-BS)
Specifications
Specifications
Set name
Power source
*1
Cooling capacity
kW
*1 BTU/h
(Nominal)
Power input
kW
Current input
A
EER (kW/kW)
*3
Cooling capacity
kW
Temp.
Indoor
W.B.
range of
Outdoor
D.B.
cooling
*2
Heating capacity
kW
*2 BTU/h
(Nominal )
PUHY-P1100YSHA(-BS)
PUHY-P1150YSHA(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
124.0
423,100
35.83
60.4-57.4-55.3
3.46
126.1
130.0
443,600
39.39
66.4-63.1-60.8
3.30
132.2
15~24°C (59~75°F)
- 5~46°C (23~115°F)
140.0
477,700
36.93
62.3-59.2-57.0
3.79
Power input
kW
Current input
A
COP (kW/kW)
Indoor temp. D.B.
Outdoor temp. W.B.
145.0
494,700
39.08
65.9-62.6-60.4
3.71
Temp.
15~27°C (59~81°F)
range
-20~15.5°C (-4~60°F)
of heating
Indoor unit Total capacity
50~130% of outdoor unit capacity
connectable Model/Quantity
P15~P250 / 2~50
P15~P250 / 2~50
Sound pressure level
65
65.5
dB<A>
(measured in anechoic room)
Power pressure level
85
85.5
dB<A>
(measured in anechoic room)
Diameter of
ø19.05 (ø3/4) Brazed
ø19.05 (ø3/4) Brazed
Liquid
mm(in.)
refrigerant pipe Gas
ø41.28 (ø1-5/8) Brazed
ø41.28 (ø1-5/8) Brazed
mm(in.)
Outdoor unit 1 , Outdoor unit 2 , and Outdoor unit 3 PUHY-P350YHA(-BS) PUHY-P350YHA(-BS) PUHY-P400YHA(-BS) PUHY-P350YHA(-BS) PUHY-P350YHA(-BS) PUHY-P450YHA(-BS)
External finish
Pre-coated galvanized steel sheets (+ powder coating for-BS type) <MUNSELL 3.0Y 7.8/11 or similar>
1,650 x 1,220 x 760 1,650 x 1,220 x 760 1,650 x 1,220 x 760 1,650 x 1,220 x 760 1,650 x 1,220 x 760 1,650 x 1,220 x 760
mm
External dimension H x W x D
65 x 48-1/16 x 29-15/16 65 x 48-1/16 x 29-15/16 65 x 48-1/16 x 29-15/16 65 x 48-1/16 x 29-15/16 65 x 48-1/16 x 29-15/16 65 x 48-1/16 x 29-15/16
in.
245(541)
245(541)
245(541)
245(541)
245(541)
245(541)
Net weight
kg (lbs)
Heat exchanger
Salt-resistant cross fin & copper tube
Inverter scroll hermetic compressor
Type
Compressor Starting method
Inverter
10.3
10.3
10.5
10.3
10.3
12.0
Motor output
kW
225
225
225
225
225
225
Air flow rate m3/min
3,750
3,750
3,750
3,750
3,750
3,750
L/s
7,945
FAN
7,945
7,945
7,945
7,945
7,945
cfm
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Type x Quantity
0.92 x 1
0.92x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
Motor output
kW
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
High pressure protection
Protection
Over-current protection
Inverter circuit
devices
Fan motor
Thermal switch
Thermal switch
Thermal switch
Thermal switch
Thermal switch
Thermal switch
R410A x 11.5kg
R410A x 11.5kg
R410A x 11.5kg
R410A x 11.5kg
R410A x 11.5kg
R410A x 11.5kg
Refrigerant Type x Original charge
(26 lbs)
(26 lbs)
(26 lbs)
(26 lbs)
(26 lbs)
(26 lbs)
mm(in.)
ø12.7 (ø1/2) Brazed
ø15.88 (ø5/8) Brazed
ø12.7 (ø1/2) Brazed
ø15.88 (ø5/8) Brazed
Pipe between Liquid
mm(in.)
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
unit distributor Gas
Outdoor Twinning Kit : CMY-Y300VBK2
joint : CMY-Y102SS / LS-G2, CMY-Y202S / 302S-G2
Header : CMY-Y104 / 108 / 1010-G
Optional parts
Notes:
PUHY-P1200YSHA(-BS)
PUHY-P1250YSHA(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
*1
*1
136.0
464,000
41.71
70.4-66.8-64.4
3.26
138.3
kW
BTU/h
kW
Power input
A
Current input
EER (kW/kW)
*3
Cooling capacity
kW
Temp.
W.B.
Indoor
range of
D.B.
Outdoor
cooling
*2
Heating capacity
kW
*2 BTU/h
(Nominal )
140.0
477,700
46.20
77.9-74.0-71.4
3.03
142.4
15~24°C (59~75°F)
- 5~46°C (23~115°F)
150.0
511,800
40.10
67.6-64.3-61.9
3.74
kW
Power input
A
Current input
COP (kW/kW)
Indoor temp. D.B.
Outdoor temp. W.B.
150.0
511,800
44.77
75.5-71.7-69.2
3.35
Temp.
15~27°C (59~81°F)
range
-20~15.5°C (-4~60°F)
of heating
Indoor unit Total capacity
50~130% of outdoor unit capacity
connectable Model/Quantity
P15~P250 / 2~50
P15~P250 / 2~50
Sound pressure level
66
66
dB<A>
(measured in anechoic room)
Power pressure level
86
86
dB<A>
(measured in anechoic room)
Diameter of
ø19.05 (ø3/4) Brazed
ø19.05 (ø3/4) Brazed
Liquid
mm(in.)
refrigerant pipe Gas
ø41.28 (ø1-5/8) Brazed
ø41.28 (ø1-5/8) Brazed
mm(in.)
Outdoor unit 1 , Outdoor unit 2 , and Outdoor unit 3 PUHY-P350YHA(-BS) PUHY-P400YHA(-BS) PUHY-P450YHA(-BS) PUHY-P350YHA(-BS) PUHY-P450YHA(-BS) PUHY-P450YHA(-BS)
External finish
Pre-coated galvanized steel sheets (+ powder coating for-BS type) <MUNSELL 3.0Y 7.8/11 or similar>
1,650 x 1,220 x 760 1,650 x 1,220 x 760 1,650 x 1,220 x 760 1,650 x 1,220 x 760 1,650 x 1,220 x 760 1,650 x 1,220 x 760
mm
External dimension H x W x D
65 x 48-1/16 x 29-15/16 65 x 48-1/16 x 29-15/16 65 x 48-1/16 x 29-15/16 65 x 48-1/16 x 29-15/16 65 x 48-1/16 x 29-15/16 65 x 48-1/16 x 29-15/16
in.
Net weight
245 (541)
245 (541)
245 (541)
245 (541)
245 (541)
245 (541)
kg (lbs)
Heat exchanger
Salt-resistant cross fin & copper tube
Inverter scroll hermetic compressor
Type
Compressor Starting method
Inverter
10.3
10.5
12.0
10.3
12.0
12.0
kW
Motor output
225
225
225
225
225
225
Air flow rate m3/min
3,750
3,750
3,750
3,750
3,750
3,750
L/s
7,945
7,945
7,945
7,945
7,945
7,945
FAN
cfm
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Type x Quantity
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
Motor output
kW
High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
High pressure protection
Protection
Over-current protection
Inverter circuit
devices
Fan motor
Thermal switch
Thermal switch
Thermal switch
Thermal switch
Thermal switch
Thermal switch
R410A x 11.5kg
R410A x 11.5kg
R410A x 11.5kg
R410A x 11.5kg
R410A x 11.5kg
R410A x 11.5kg
Refrigerant Type x Original charge
(26 lbs)
(26 lbs)
(26 lbs)
(26 lbs)
(26 lbs)
(26 lbs)
ø15.88 (ø5/8) Brazed
ø15.88 (ø5/8) Brazed
ø12.7 (ø1/2) Brazed
ø12.7 (ø1/2) Brazed
mm(in.)
Pipe between Liquid
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
mm(in.) ø28.58 (ø1-1/8) Brazed
unit distributor Gas
Outdoor Twinning Kit : CMY-Y300VBK2
joint : CMY-Y102SS / LS-G2, CMY-Y202S / 302S-G2
Header : CMY-Y104 / 108 / 1010-G
Optional parts
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*3 Reference data under condition of Indoor 27°C DB/19.5°C WB(81°F DB/67°F WB) Outdoor 35°C DB(95°F DB)
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 55
Set name
Power source
Cooling capacity
(Nominal)
*3 Reference data under condition of Indoor 27°C DB/19.5°C WB(81°F DB/67°F WB) Outdoor 35°C DB(95°F DB)
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 56
OUTDOOR UNIT
Y Series - High COP
PUHY-EP YJM-A(-BS)
OUTDOOR UNIT
Y Series - High COP
PUHY-EP YSJM-A
(-BS)
Specifications
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
diameter
Gas pipe
mm (in.)
FAN
Type x Quantity
Air flow rate
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
*3 External static press.
Compressor
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External finish
External dimension HxWxD
mm
in.
Protection
devices
Refrigerant
Net weight
Heat exchanger
Optional parts
PUHY-EP200YJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
22.4
76,400
5.09
8.5-8.1-7.8
4.40
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
25.0
85,300
5.54
9.3-8.8-8.5
4.51
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~17
PUHY-EP250YJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
28.0
95,500
6.73
11.3-10.7-10.4
4.16
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
31.5
107,500
7.15
12.0-11.4-11.0
4.40
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~21
PUHY-EP300YJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
33.5
114,300
8.03
13.5-12.8-12.4
4.17
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
37.5
128,000
8.37
14.1-13.4-12.9
4.48
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~26
57
60
61
77
80
81
9.52(3/8) Brazed
19.05(3/4) Brazed
Propeller fan x 1
170
2,833
6,003
Inverter-control, Direct-driven by motor
0.46 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
5.4
0.035
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
9.52(3/8) Brazed (12.7(1/2) Brazed,total length >= 90m)
22.2(7/8) Brazed
Propeller fan x 1
210
3,500
7,415
Inverter-control, Direct-driven by motor
0.46 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
6.8
0.045
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
9.52(3/8) Brazed (12.7(1/2) Brazed,total length >= 40m)
22.2(7/8) Brazed
Propeller fan x 2
370
6,167
13,065
Inverter-control, Direct-driven by motor
0.46 x 2
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
7.7
0.045
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without legs) x 920 x 760
1,710(1,650 without legs) x 1,220 x 760
1,710(1,650 without legs) x 1,750 x 760
67-3/8(65 without legs) x 36-1/4 x 29-15/16 67-3/8(48-1/16 without legs) x 48-1/16 x 29-15/16 67-3/8(65 without legs) x 68-15/16 x 29-15/16
High pressure protection
High pressure sensor, High pressure switch High pressure sensor, High pressure switch High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
at 4.15MPa (601 psi)
at 4.15MPa (601 psi)
Inverter circuit
Over-current protection
Over-current protection
Over-current protection
Fan motor
Thermal switch
Thermal switch
Thermal switch
Type x original charge
R410A x 8.0kg (18lbs)
R410A x 11.5kg (26lbs)
R410A x 11.8kg (27lbs)
kg (lbs)
200(441)
250(552)
290(640)
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
Joint: CMY-Y102SS-G2
Joint: CMY-Y102SS/LS-G2
Joint: CMY-Y102SS/LS-G2
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
diameter
Gas pipe
Set Model
Model
FAN
Compressor
External finish
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
*3 External static press.
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External dimension HxWxD
mm
in.
Protection
devices
High pressure protection
Inverter circuit
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit Liquid pipe
and distributor
Gas pipe
Optional parts
mm (in.)
mm (in.)
PUHY-EP450YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
50.0
170,600
11.87
20.0-19.0-18.3
4.21
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
56.0
191,100
12.90
21.7-20.6-19.9
4.34
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~39
PUHY-EP500YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
56.0
191,100
13.30
22.4-21.3-20.5
4.21
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
63.0
215,000
14.28
24.1-22.9-22.0
4.41
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~43
60
62
62.5
80
82
82.5
12.7(1/2) Brazed
28.58(1-1/8) Brazed
15.88(5/8) Brazed
28.58(1-1/8) Brazed
15.88(5/8) Brazed
28.58(1-1/8) Brazed
PUHYPUHYEP200YJM-A(-BS) EP200YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
170
170
2,833
2,833
6,003
6,003
Inverter-control, Direct-driven by motor
0.46 x 1
0.46 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
5.4
5.4
0.035
0.035
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 920 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
R410A x 8.0kg (18lbs)
R410A x 8.0kg (18lbs)
200(441)
200(441)
Salt-resistant cross fin & copper tube
9.52(3/8) Brazed
9.52(3/8) Brazed
19.05(3/4) Brazed
19.05(3/4) Brazed
Outdoor Twinning kit: CMY-Y100VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S-G2
Header: CMY-Y104/108/1010-G
PUHYPUHYEP200YJM-A(-BS) EP250YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
170
210
2,833
3,500
6,003
7,415
Inverter-control, Direct-driven by motor
0.46 x 1
0.46 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
5.4
6.8
0.035
0.045
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
R410A x 8.0kg (18lbs) R410A x 11.5kg (26lbs)
200(441)
250(552)
Salt-resistant cross fin & copper tube
9.52(3/8) Brazed
9.52(3/8) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-Y100VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S-G2
Header: CMY-Y104/108/1010-G
PUHYPUHYEP200YJM-A(-BS) EP300YJM-A(-BS)
Propeller fan x 1
Propeller fan x 2
170
370
2,833
6,167
6,003
13,065
Inverter-control, Direct-driven by motor
0.46 x 1
0.46 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
5.4
7.7
0.035
0.045
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 68-15/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
R410A x 8.0kg (18lbs) R410A x 11.8kg (27lbs)
200(441)
290(640)
Salt-resistant cross fin & copper tube
9.52(3/8) Brazed
12.7(1/2) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-Y100VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S-G2
Header: CMY-Y104/108/1010-G
mm (in.)
mm (in.)
Type x Quantity
Air flow rate
PUHY-EP400YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
45.0
153,500
10.34
17.4-16.5-15.9
4.35
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
50.0
170,600
11.41
19.2-18.2-17.6
4.38
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~35
Notes:
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*3 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 57
Model
Power source
Cooling capacity
(Nominal)
*3 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 58
OUTDOOR UNIT
Y Series - High COP
PUHY-EP YSJM-A
(-BS)
OUTDOOR UNIT
Y Series - High COP
PUHY-EP YSJM-A(1)
(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
diameter
Gas pipe
Set Model
Model
FAN
Compressor
External finish
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
*3 External static press.
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External dimension HxWxD
mm
in.
Protection
devices
High pressure protection
Inverter circuit
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit Liquid pipe
and distributor
Gas pipe
Optional parts
mm (in.)
mm (in.)
PUHY-EP500YSJM-A1(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
56.0
191,100
13.65
23.0-21.8-21.0
4.10
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
63.0
215,000
14.54
24.5-23.3-22.4
4.33
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~43
PUHY-EP550YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
63.0
215,000
15.36
25.9-24.6-23.7
4.10
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
69.0
235,400
15.78
26.6-25.3-24.3
4.37
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~47
PUHY-EP600YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
69.0
235,400
16.82
28.3-26.9-26.0
4.10
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
76.5
261,000
17.30
29.2-27.7-26.7
4.42
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~50
63
63.5
64
83
83.5
84
15.88(5/8) Brazed
28.58(1-1/8) Brazed
15.88(5/8) Brazed
28.58(1-1/8) Brazed
15.88(5/8) Brazed
28.58(1-1/8) Brazed
PUHYPUHYEP250YJM-A(-BS) EP250YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
210
210
3,500
3,500
7,415
7,415
Inverter-control, Direct-driven by motor
0.46 x 1
0.46 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
6.8
6.8
0.045
0.045
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,220 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 48-1/16 x 29-15/16
x 48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
R410A x 11.5kg (26lbs) R410A x 11.5kg (26lbs)
250(552)
250(552)
Salt-resistant cross fin & copper tube
9.52(3/8) Brazed
9.52(3/8) Brazed
22.2(7/8) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-Y100VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S-G2
Header: CMY-Y104/108/1010-G
PUHYPUHYEP250YJM-A(-BS) EP300YJM-A(-BS)
Propeller fan x 1
Propeller fan x 2
210
370
3,500
6,167
7,415
13,065
Inverter-control, Direct-driven by motor
0.46 x 1
0.46 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
6.8
7.7
0.045
0.045
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,220 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 48-1/16 x 29-15/16 x 68-15/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
R410A x 11.5kg (26lbs) R410A x 11.8kg (27lbs)
250(552)
290(640)
Salt-resistant cross fin & copper tube
9.52(3/8) Brazed
12.7(1/2) Brazed
22.2(7/8) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-Y100VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S-G2
Header: CMY-Y104/108/1010-G
PUHYPUHYEP300YJM-A(-BS) EP300YJM-A(-BS)
Propeller fan x 2
Propeller fan x 2
370
370
6,167
6,167
13,065
13,065
Inverter-control, Direct-driven by motor
0.46 x 2
0.46 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
7.7
7.7
0.045
0.045
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,750 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 68-15/16 x 29-15/16 x 68-15/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
290(640)
290(640)
Salt-resistant cross fin & copper tube
12.7(1/2) Brazed
12.7(1/2) Brazed
22.2(7/8) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-Y100VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S-G2
Header: CMY-Y104/108/1010-G
mm (in.)
mm (in.)
Type x Quantity
Air flow rate
Specifications
Notes:
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
diameter
Gas pipe
Set Model
Model
mm (in.)
mm (in.)
PUHY-EP650YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
73.0
249,100
17.46
29.4-28.0-26.9
4.18
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
81.5
278,100
18.56
31.3-29.7-28.6
4.39
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~50
PUHY-EP700YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
80.0
273,000
19.13
32.2-30.6-29.5
4.18
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
88.0
300,300
20.00
33.7-32.0-30.9
4.40
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~50
63
63.5
83
83.5
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed
19.05(3/4) Brazed
34.93(1-3/8) Brazed
PUHYPUHYPUHYEP200YJM-A(-BS) EP200YJM-A(-BS) EP250YJM-A(-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Air flow rate
170
170
210
m3/min
L/s
2,833
2,833
3,500
cfm
6,003
6,003
7,415
Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.46 x 1
0.46 x 1
0.46 x 1
*3 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
5.4
5.4
6.8
Case heater
kW
0.035
0.035
0.045
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
1,710(1,650 without 1,710(1,650 without 1,710(1,650 without
mm
legs) x 920 x 760
legs) x 920 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) 67-3/8(65 without legs) 67-3/8(65 without legs)
in.
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
x 48-1/16 x 29-15/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15MPa (601 psi)
devices
Inverter circuit
Over-current protection
Fan motor
Thermal switch
Thermal switch
Thermal switch
Refrigerant
Type x original charge
R410A x 8.0kg (18lbs) R410A x 8.0kg (18lbs) R410A x 11.5kg (26lbs)
Net weight
kg (lbs)
200(441)
200(441)
250(552)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 9.52(3/8) Brazed
9.52(3/8) Brazed
9.52(3/8) Brazed
and distributor
Gas pipe
mm (in.) 19.05(3/4) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y300VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S/302S-G2
Header: CMY-Y104/108/1010-G
PUHYPUHYPUHYEP200YJM-A(-BS) EP200YJM-A(-BS) EP300YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
Propeller fan x 2
170
170
370
2,833
2,833
6,167
6,003
6,003
13,065
Inverter-control, Direct-driven by motor
0.46 x 1
0.46 x 1
0.46 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
5.4
5.4
7.7
0.035
0.035
0.045
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 920 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
x 68-15/16 x 29-15/16
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
Thermal switch
R410A x 8.0kg (18lbs) R410A x 8.0kg (18lbs) R410A x 11.8kg (27lbs)
200(441)
200(441)
290(640)
Salt-resistant cross fin & copper tube
9.52(3/8) Brazed
9.52(3/8) Brazed
12.7(1/2) Brazed
19.05(3/4) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-Y300VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*3 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 59
Model
Power source
Cooling capacity
(Nominal)
*3 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 60
OUTDOOR UNIT
Y Series - High COP
PUHY-EP YSJM-A(1)
(-BS)
OUTDOOR UNIT
Y Series - High COP
PUHY-EP YSJM-A(1)
(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
diameter
Gas pipe
Set Model
Model
mm (in.)
mm (in.)
Specifications
PUHY-EP700YSJM-A1(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
80.0
273,000
19.41
32.7-31.1-30.0
4.12
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
88.0
300,300
20.32
34.3-32.5-31.4
4.33
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~50
PUHY-EP750YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
85.0
290,000
20.43
34.4-32.7-31.5
4.16
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
95.0
324,100
21.93
37.0-35.1-33.8
4.33
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~50
64
64.5
84
84.5
19.05(3/4) Brazed
34.93(1-3/8) Brazed
19.05(3/4) Brazed
34.93(1-3/8) Brazed
PUHYPUHYPUHYEP200YJM-A(-BS) EP250YJM-A(-BS) EP250YJM-A(-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Air flow rate
170
210
210
m3/min
L/s
2,833
3,500
3,500
cfm
6,003
7,415
7,415
Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.46 x 1
0.46 x 1
0.46 x 1
*3 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
5.4
6.8
6.8
Case heater
kW
0.035
0.045
0.045
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
1,710(1,650 without 1,710(1,650 without 1,710(1,650 without
mm
legs) x 920 x 760
legs) x 1,220 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) 67-3/8(65 without legs) 67-3/8(65 without legs)
in.
x 36-1/4 x 29-15/16
x 48-1/16 x 29-15/16
x 48-1/16 x 29-15/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15MPa (601 psi)
devices
Inverter circuit
Over-current protection
Fan motor
Thermal switch
Thermal switch
Thermal switch
Refrigerant
Type x original charge
R410A x 8.0kg (18lbs) R410A x 11.5kg (26lbs) R410A x 11.5kg (26lbs)
Net weight
kg (lbs)
200(441)
250(552)
250(552)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 9.52(3/8) Brazed
9.52(3/8) Brazed
9.52(3/8) Brazed
and distributor
Gas pipe
mm (in.) 19.05(3/4) Brazed
22.2 (7/8) Brazed
22.2(7/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y300VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S/302S-G2
Header: CMY-Y104/108/1010-G
PUHYPUHYPUHYEP200YJM-A(-BS) EP250YJM-A(-BS) EP300YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
Propeller fan x 2
170
210
370
2,833
3,500
6,167
6,003
7,415
13,065
Inverter-control, Direct-driven by motor
0.46 x 1
0.46 x 1
0.46 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
5.4
6.8
7.7
0.035
0.045
0.045
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 1,220 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 48-1/16 x 29-15/16 x 68-15/16 x 29-15/16
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
Thermal switch
R410A x 8.0kg (18lbs) R410A x 11.5kg (26lbs) R410A x 11.8kg (27lbs)
200(441)
250(552)
290(640)
Salt-resistant cross fin & copper tube
9.52(3/8) Brazed
9.52(3/8) Brazed
12.7(1/2) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-Y300VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
diameter
Gas pipe
Set Model
Model
mm (in.)
mm (in.)
PUHY-EP750YSJM-A1(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
85.0
290,000
20.93
35.3-33.5-32.3
4.06
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
95.0
324,100
21.78
36.7-34.9-33.6
4.36
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~50
PUHY-EP800YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
90.0
307,100
21.63
36.5-34.6-33.4
4.16
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
100.0
341,200
22.77
38.4-36.5-35.1
4.39
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~50
65
65
85
85
19.05(3/4) Brazed
34.93(1-3/8) Brazed
19.05(3/4) Brazed
34.93(1-3/8) Brazed
PUHYPUHYPUHYEP250YJM-A(-BS) EP250YJM-A(-BS) EP250YJM-A(-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Air flow rate
210
210
210
m3/min
L/s
3,500
3,500
3,500
cfm
7,415
7,415
7,415
Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.46 x 1
0.46 x 1
0.46 x 1
*3 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
6.8
6.8
6.8
Case heater
kW
0.045
0.045
0.045
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
1,710(1,650 without 1,710(1,650 without 1,710(1,650 without
mm
legs) x 1,220 x 760
legs) x 1,220 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) 67-3/8(65 without legs) 67-3/8(65 without legs)
in.
x 48-1/16 x 29-15/16
x 48-1/16 x 29-15/16
x 48-1/16 x 29-15/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15MPa (601 psi)
devices
Inverter circuit
Over-current protection
Fan motor
Thermal switch
Thermal switch
Thermal switch
Refrigerant
Type x original charge
R410A x 11.5kg (26lbs) R410A x 11.5kg (26lbs) R410A x 11.5kg (26lbs)
Net weight
kg (lbs)
250(552)
250(552)
250(552)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 9.52(3/8) Brazed
9.52(3/8) Brazed
9.52(3/8) Brazed
and distributor
Gas pipe
mm (in.) 22.2(7/8) Brazed
22.2(7/8) Brazed
22.2(7/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y300VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S/302S-G2
Header: CMY-Y104/108/1010-G
PUHYPUHYPUHYEP200YJM-A(-BS) EP300YJM-A(-BS) EP300YJM-A(-BS)
Propeller fan x 1
Propeller fan x 2
Propeller fan x 2
170
370
370
2,833
6,167
6,167
6,003
13,065
13,065
Inverter-control, Direct-driven by motor
0.46 x 1
0.46 x 2
0.46 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
5.4
7.7
7.7
0.035
0.045
0.045
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 1,750 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 68-15/16 x 29-15/16 x 68-15/16 x 29-15/16
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
Thermal switch
R410A x 8.0kg (18lbs) R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
200(441)
290(640)
290(640)
Salt-resistant cross fin & copper tube
9.52(3/8) Brazed
12.7(1/2) Brazed
12.7(1/2) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-Y300VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*3 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 61
Model
Power source
Cooling capacity
(Nominal)
*3 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 62
OUTDOOR UNIT
Y Series - High COP
PUHY-EP YSJM-A(-BS)
OUTDOOR UNIT
Y Series - High COP
PUHY-EP YSJM-A(1)
(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
diameter
Gas pipe
Set Model
Model
mm (in.)
mm (in.)
Specifications
PUHY-EP800YSJM-A1(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
90.0
307,100
22.16
37.4-35.5-34.2
4.06
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
100.0
341,200
22.98
38.7-36.8-35.5
4.35
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~50
PUHY-EP850YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
96.0
327,600
23.58
39.8-37.8-36.4
4.07
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
108.0
368,500
24.65
41.6-39.5-38.1
4.38
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~50
65
65.5
85
85.5
19.05(3/4) Brazed
34.93(1-3/8) Brazed
19.05(3/4) Brazed
41.28(1-5/8) Brazed
PUHYPUHYPUHYEP250YJM-A(-BS) EP250YJM-A(-BS) EP300YJM-A(-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 2
Air flow rate
210
210
370
m3/min
L/s
3,500
3,500
6,167
cfm
7,415
7,415
13,065
Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.46 x 1
0.46 x 1
0.46 x 2
*3 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
6.8
6.8
7.7
Case heater
kW
0.045
0.045
0.045
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
1,710(1,650 without 1,710(1,650 without 1,710(1,650 without
mm
legs) x 1,220 x 760
legs) x 1,220 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs) 67-3/8(65 without legs)
in.
x 48-1/16 x 29-15/16
x 48-1/16 x 29-15/16 x 68-15/16 x 29-15/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15MPa (601 psi)
devices
Inverter circuit
Over-current protection
Fan motor
Thermal switch
Thermal switch
Thermal switch
Refrigerant
Type x original charge
R410A x 11.5kg (26lbs) R410A x 11.5kg (26lbs) R410A x 11.8kg (27lbs)
Net weight
kg (lbs)
250(552)
250(552)
290(640)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 9.52(3/8) Brazed
9.52(3/8) Brazed
12.7(1/2) Brazed
and distributor
Gas pipe
mm (in.) 22.2(7/8) Brazed
22.2(7/8) Brazed
22.2(7/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y300VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S/302S-G2
Header: CMY-Y104/108/1010-G
PUHYPUHYPUHYEP250YJM-A(-BS) EP300YJM-A(-BS) EP300YJM-A(-BS)
Propeller fan x 1
Propeller fan x 2
Propeller fan x 2
210
370
370
3,500
6,167
6,167
7,415
13,065
13,065
Inverter-control, Direct-driven by motor
0.46 x 1
0.46 x 2
0.46 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
6.8
7.7
7.7
0.045
0.045
0.045
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without 1,710(1,650 without
legs) x 1,220 x 760
legs) x 1,750 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs) 67-3/8(65 without legs)
x 48-1/16 x 29-15/16 x 68-15/16 x 29-15/16 x 68-15/16 x 29-15/16
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
Thermal switch
R410A x 11.5kg (26lbs) R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
250(552)
290(640)
290(640)
Salt-resistant cross fin & copper tube
9.52(3/8) Brazed
12.7(1/2) Brazed
12.7(1/2) Brazed
22.2(7/8) Brazed
22.2(7/8) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-Y300VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
PUHY-EP900YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
101.0
344,600
24.81
41.8-39.7-38.3
4.07
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
113.0
385,600
25.50
43.0-40.8-39.4
4.43
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~50
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
66
86
Refrigerant piping Liquid pipe
mm (in.)
diameter
Gas pipe
mm (in.)
Set Model
Model
FAN
Type x Quantity
Air flow rate
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
Compressor
External finish
PUHY-EP300YJM-A(-BS)
Propeller fan x 2
370
6,167
13,065
0.46 x 2
*3 External static press.
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
0 Pa (0 mmH2O)
Inverter
7.7
0.045
PUHY-EP300YJM-A(-BS)
Propeller fan x 2
370
6,167
13,065
Inverter-control, Direct-driven by motor
0.46 x 2
PUHY-EP300YJM-A(-BS)
Propeller fan x 2
370
6,167
13,065
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
7.7
0.045
0 Pa (0 mmH2O)
0.46 x 2
Inverter
7.7
0.045
Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
mm
in.
Protection
devices
19.05(3/4) Brazed
41.28(1-5/8) Brazed
1,710(1,650 without legs) x 1,750 x 760
1,710(1,650 without legs) x 1,750 x 760
67-3/8(65 without legs) x 68-15/16 x 29-15/16 67-3/8(65 without legs) x 68-15/16 x 29-15/16 67-3/8(65 without legs) x 68-15/16 x 29-15/16
High pressure protection
Inverter circuit
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit Liquid pipe
and distributor
Gas pipe
Optional parts
1,710(1,650 without legs) x 1,750 x 760
mm (in.)
mm (in.)
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-current protection
Thermal switch
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs)
R410A x 11.8kg (27lbs)
R410A x 11.8kg (27lbs)
290(640)
290(640)
290(640)
Salt-resistant cross fin & copper tube
12.7(1/2) Brazed
12.7(1/2) Brazed
12.7(1/2) Brazed
22.2(7/8) Brazed
22.2(7/8) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-Y300VBK2
Joint: CMY-Y102SS/LS-G2, CMY-Y202S/302S-G2
Header: CMY-Y104/108/1010-G
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*3 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 63
Model
Power source
Cooling capacity
(Nominal)
*3 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-2.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 64
HEAT SOURCE UNIT
WY (Heat Pump) Series
PQHY-P YHM-A
HEAT SOURCE UNIT
WY (Heat Pump) Series
PQHY-P YSHM-A
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1
*1
Power input
Current input
EER
Temp. range of
Indoor
cooling
Circulating water
Heating capacity
*2
(Nominal)
*2
Power input
Current input
COP
Temp. range of
Indoor
heating
Circulating water
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
(measured in anechoic room)
Refrigerant piping Liquid pipe
diameter [O.D.]
Gas pipe
Circulating water Water flow rate
Compressor
Pressure drop
Operating
volume range
Type x Quantity
Starting method
Motor output
Case heater
External finish
External dimension HxWxD
Specifications
kW
BTU / h
kW
A
kW / kW
W.B.
°C
kW
BTU / h
kW
A
kW / kW
D.B.
°C
PQHY-P200YHM-A
3-phase 4-wire 380-400-415V 50/60Hz
22.4
76,400
3.92
6.6-6.2-6.0
5.71
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
25.0
85,300
4.12
6.9-6.6-6.3
6.06
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 1~17
dB <A>
47
mm (in.)
mm (in.)
m3 / h
L/min
cfm
kPa
9.52(3/8) Brazed
19.05(3/4) Brazed
5.76
96
3.4
17
m3 / h
PQHY-P300YHM-A
3-phase 4-wire 380-400-415V 50/60Hz
33.5
114,300
7.36
12.4-11.8-11.3
4.55
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
37.5
128,000
8.15
13.7-13.0-12.5
4.60
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 1~26
49
50
9.52(3/8) Brazed (12.7(1/2) Brazed,total length >= 90m) 9.52(3/8) Brazed (12.7(1/2) Brazed,total length >= 40m)
22.2(7/8) Brazed
22.2(7/8) Brazed
5.76
5.76
96
96
3.4
3.4
17
17
4.5 ~ 7.2
4.5 ~ 7.2
4.5 ~ 7.2
Inverter scroll hermetic compressor
Inverter
4.6
0.035(240 V)
Acrylic painted steel plate
Inverter scroll hermetic compressor
Inverter
6.3
0.035(240 V)
Acrylic painted steel plate
Inverter scroll hermetic compressor
Inverter
7.4
0.035(240 V)
Acrylic painted steel plate
1,160(1,100 without legs) x 880 x 550
1,160(1,100 without legs) x 880 x 550
kW
kW
mm
PQHY-P250YHM-A
3-phase 4-wire 380-400-415V 50/60Hz
28.0
95,500
5.45
9.2-8.7-8.4
5.13
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
31.5
107,500
5.80
9.7-9.3-8.9
5.43
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 1~21
45-11/16(43-5/16 without legs) x 34-11/16 x 45-11/16(43-5/16 without legs) x 34-11/16 x
21-11/16
21-11/16
High pressure protection High pressure sensor, High pressure switch at 4.15MPa (601 psi) High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Inverter circuit (COMP.)
Over-heat protection, Over-current protection Over-heat protection, Over-current protection
Compressor
Over-heat protection
Over-heat protection
Type x original charge
R410A x 5.0kg (12lbs)
R410A x 5.0kg (12lbs)
kg (lbs)
195(430)
195(430)
plate type
plate type
Water volume in
L
5.0
5.0
plate
Water pressure
MPa
2.0
2.0
Max.
Joint: CMY-Y102SS-G2
Joint: CMY-Y102SS-G2, CMY-Y102LS-G2
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
in.
Protection
devices
Refrigerant
Net weight
Heat exchanger
Optional parts
1,160(1,100 without legs) x 880 x 550
45-11/16(43-5/16 without legs) x 34-11/16 x
21-11/16
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
R410A x 5.0kg (12lbs)
195(430)
plate type
5.0
2.0
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2
Header: CMY-Y104/108/1010-G
Model
Power source
Cooling capacity
(Nominal)
PQHY-P400YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
45.0
153,500
8.25
13.9-13.2-12.7
5.45
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
50.0
170,600
8.65
14.6-13.8-13.3
5.78
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 1~34
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Circulating water
°C
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Circulating water
°C
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
50
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
12.7(1/2) Brazed
diameter [O.D.]
Gas pipe
mm (in.)
28.58(1-1/8) Brazed
Set Model
Model
PQHY-P200YHM-A PQHY-P200YHM-A
Circulating water Water flow rate
5.76 + 5.76
m3 / h
L/min
96 + 96
cfm
3.4 + 3.4
Pressure drop
kPa
17
17
Operating
4.5 + 4.5 ~ 7.2 + 7.2
m3 / h
volume range
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Motor output
kW
4.6
4.6
Case heater
kW
0.035(240 V)
0.035(240 V)
External finish
Acrylic painted steel plate
External dimension HxWxD
1,160(1,100 without 1,160(1,100 without
mm
legs) x 880 x 550
legs) x 880 x 550
45-11/16(43-5/16 without 45-11/16(43-5/16 without
in.
legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15MPa (601 psi)
devices
Inverter circuit (COMP.)
Over-heat protection, Over-current protection
Compressor
Over-heat protection
Refrigerant
Type x original charge
R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs)
Net weight
kg (lbs)
195(430)
195(430)
Heat exchanger
plate type
plate type
Water volume in
L
5.0
5.0
plate
Water pressure
MPa
2.0
2.0
Max.
Optional parts
Notes:
PQHY-P500YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
56.0
191,100
11.45
19.3-18.3-17.6
4.89
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
63.0
215,000
12.06
20.3-19.3-18.6
5.22
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 1~43
51
52
15.88(5/8) Brazed
28.58(1-1/8) Brazed
15.88(5/8) Brazed
28.58(1-1/8) Brazed
PQHY-P250YHM-A PQHY-P200YHM-A
5.76 + 5.76
96 + 96
3.4 + 3.4
17
17
PQHY-P250YHM-A PQHY-P250YHM-A
5.76 + 5.76
96 + 96
3.4 + 3.4
17
17
4.5 + 4.5 ~ 7.2 + 7.2
4.5 + 4.5 ~ 7.2 + 7.2
Inverter scroll hermetic compressor
Inverter
Inverter
6.3
4.6
0.035(240 V)
0.035(240 V)
Acrylic painted steel plate
1,160(1,100 without 1,160(1,100 without
legs) x 880 x 550
legs) x 880 x 550
45-11/16(43-5/16 without 45-11/16(43-5/16 without
legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs)
195(430)
195(430)
plate type
plate type
Inverter scroll hermetic compressor
Inverter
Inverter
6.3
6.3
0.035(240 V)
0.035(240 V)
Acrylic painted steel plate
1,160(1,100 without 1,160(1,100 without
legs) x 880 x 550
legs) x 880 x 550
45-11/16(43-5/16 without 45-11/16(43-5/16 without
legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs)
195(430)
195(430)
plate type
plate type
5.0
5.0
5.0
5.0
2.0
2.0
2.0
2.0
Heat Source Twinning kit: CMY-Y100VBK2 Heat Source Twinning kit: CMY-Y100VBK2 Heat Source Twinning kit: CMY-Y100VBK2
Joint: CMY-Y102SS-G2, CMY-Y102LS-G2, CMY-Y202S-G2 Joint: CMY-Y102SS-G2, CMY-Y102LS-G2, CMY-Y202S-G2 Joint: CMY-Y102SS-G2, CMY-Y102LS-G2, CMY-Y202S-G2
Header:CMY-Y104/108/1010-G
Header:CMY-Y104/108/1010-G
Header:CMY-Y104/108/1010-G
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Water temperature
Cooling
27ºCD.B./19ºCW.B.
(81ºFD.B./66ºFW.B.)
30ºC (86ºF)
Heating
20ºCD.B. (68ºFD.B.)
20ºC (68ºF)
Pipe length
7.5m (24-9/16ft.)
*3 The ambient temperature of the heat source unit needs to be kept below 40ºCD.B.
*4 The ambient relative humidity of the heat source unit needs to be kept below 80%.
*5 The heat source Unit should not be installed at outdoor.
*6 Be sure to mount a strainer (more than 50 meshes) at the water inlet piping of the unit.
*7 Be sure to provide interlocking for the unit operation and water circuit.
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 65
PQHY-P450YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
50.0
170,600
9.84
16.6-15.7-15.2
5.08
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
56.0
191,100
10.42
17.5-16.7-16.1
5.37
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 1~39
Level difference
0m (0ft.)
Indoor
Water temperature
Cooling
27ºCD.B./19ºCW.B.
(81ºFD.B./66ºFW.B.)
30ºC (86ºF)
Heating
20ºCD.B. (68ºFD.B.)
20ºC (68ºF)
Pipe length
Level difference
7.5m (24-9/16ft.)
0m (0ft.)
*3 The ambient temperature of the heat source unit needs to be kept below 40ºCD.B.
*4 The ambient relative humidity of the heat source unit needs to be kept below 80%.
*5 The heat source Unit should not be installed at outdoor.
*6 Be sure to mount a strainer (more than 50 meshes) at the water inlet piping of the unit.
*7 Be sure to provide interlocking for the unit operation and water circuit.
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 66
HEAT SOURCE UNIT
WY (Heat Pump) Series
PQHY-P YSHM-A
HEAT SOURCE UNIT
WY (Heat Pump) Series
PQHY-P YSHM-A
Specifications
Specifications
Model
Power source
Cooling capacity
(Nominal)
PQHY-P550YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
63.0
215,000
13.46
22.7-21.5-20.8
4.68
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
69.0
235,400
14.65
24.7-23.4-22.6
4.70
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 2~47
PQHY-P600YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
69.0
235,400
15.48
26.1-24.8-23.9
4.45
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
76.5
261,000
17.12
28.9-27.4-26.4
4.46
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 2~50
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Circulating water
°C
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Circulating water
°C
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
52.5
53
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
15.88(5/8) Brazed
15.88(5/8) Brazed
diameter [O.D.]
Gas pipe
mm (in.)
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
Set Model
Model
PQHY-P300YHM-A
PQHY-P250YHM-A
PQHY-P300YHM-A
PQHY-P300YHM-A
Circulating water Water flow rate
5.76 + 5.76
5.76 + 5.76
m3 / h
L/min
96 + 96
96 + 96
cfm
3.4 + 3.4
3.4 + 3.4
Pressure drop
kPa
17
17
17
17
Operating
4.5 + 4.5 ~ 7.2 + 7.2
4.5 + 4.5 ~ 7.2 + 7.2
m3 / h
volume range
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Inverter
Motor output
kW
7.4
6.3
7.4
7.4
Case heater
kW
0.035(240 V)
0.035(240 V)
0.035(240 V)
0.035(240 V)
External finish
Acrylic painted steel plate
Acrylic painted steel plate
Acrylic painted steel plate
Acrylic painted steel plate
External dimension HxWxD
1,160(1,100 without legs) x 880 1,160(1,100 without legs) x 880 1,160(1,100 without legs) x 880 1,160(1,100 without legs) x 880
mm
x 550
x 550
x 550
x 550
45-11/16(43-5/16 without legs) x 45-11/16(43-5/16 without legs) x 45-11/16(43-5/16 without legs) x 45-11/16(43-5/16 without legs) x
in.
34-11/16 x 21-11/16
34-11/16 x 21-11/16
34-11/16 x 21-11/16
34-11/16 x 21-11/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15MPa (601 psi) High pressure sensor, High pressure switch at 4.15MPa (601 psi)
devices
Inverter circuit (COMP.)
Over-heat protection, Over-current protection
Over-heat protection, Over-current protection
Compressor
Over-heat protection
Over-heat protection
Refrigerant
Type x original charge
R410A x 5.0kg (12lbs)
R410A x 5.0kg (12lbs)
R410A x 5.0kg (12lbs)
R410A x 5.0kg (12lbs)
Net weight
kg (lbs)
195(430)
195(430)
195(430)
195(430)
Heat exchanger
plate type
plate type
plate type
plate type
Water volume in
L
5.0
5.0
5.0
5.0
plate
Water pressure
MPa
2.0
2.0
2.0
2.0
Max.
Optional parts
Heat Source Twinning kit: CMY-Y100VBK2
Heat Source Twinning kit: CMY-Y100VBK2
Joint: CMY-Y102SS-G2, CMY-Y102LS-G2, CMY-Y202S-G2,CMY-Y302S-G2 Joint: CMY-Y102SS-G2, CMY-Y102LS-G2, CMY-Y202S-G2,CMY-Y302S-G2
Header:CMY-Y104/108/1010-G
Header:CMY-Y104/108/1010-G
Notes:
PQHY-P650YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
73.0
249,100
13.96
23.5-22.3-21.5
5.22
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
81.5
278,100
14.74
24.8-23.6-22.7
5.52
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 2~50
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Circulating water
°C
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Circulating water
°C
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
53
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
19.05(3/4) Brazed
diameter [O.D.]
Gas pipe
mm (in.)
34.93(1-3/8) Brazed
Set Model
Model
PQHY-P250YHM-A PQHY-P200YHM-A PQHY-P200YHM-A
Circulating water Water flow rate
5.76 + 5.76 + 5.76
m3 / h
L/min
96 + 96 + 96
cfm
3.4 + 3.4 + 3.4
Pressure drop
kPa
17
17
17
Operating
4.5 + 4.5 + 4.5 ~ 7.2 + 7.2 + 7.2
m3 / h
volume range
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
6.3
4.6
4.6
Case heater
kW
0.035(240 V)
0.035(240 V)
0.035(240 V)
External finish
Acrylic painted steel plate
External dimension HxWxD
1,160(1,100 without 1,160(1,100 without 1,160(1,100 without
mm
legs) x 880 x 550
legs) x 880 x 550
legs) x 880 x 550
45-11/16(43-5/16 without 45-11/16(43-5/16 without 45-11/16(43-5/16 without
in.
legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15MPa (601 psi)
devices
Inverter circuit (COMP.)
Over-heat protection, Over-current protection
Compressor
Over-heat protection
Refrigerant
Type x original charge
R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs)
Net weight
kg (lbs)
195(430)
195(430)
195(430)
Heat exchanger
plate type
plate type
plate type
Water volume in
L
5.0
5.0
5.0
plate
Water pressure
MPa
2.0
2.0
2.0
Max.
Optional parts
PQHY-P700YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
80.0
273,000
15.58
26.3-24.9-24.0
5.13
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
88.0
300,300
16.51
27.8-26.4-25.5
5.33
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 2~50
53.5
19.05(3/4) Brazed
34.93(1-3/8) Brazed
PQHY-P250YHM-A
17
PQHY-P250YHM-A
5.76 + 5.76 + 5.76
96 + 96 + 96
3.4 + 3.4 + 3.4
17
PQHY-P200YHM-A
17
4.5 + 4.5 + 4.5 ~ 7.2 + 7.2 + 7.2
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
6.3
6.3
4.6
0.035(240 V)
0.035(240 V)
0.035(240 V)
Acrylic painted steel plate
1,160(1,100 without 1,160(1,100 without 1,160(1,100 without
legs) x 880 x 550
legs) x 880 x 550
legs) x 880 x 550
45-11/16(43-5/16 without 45-11/16(43-5/16 without 45-11/16(43-5/16 without
legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs)
195(430)
195(430)
195(430)
plate type
plate type
plate type
5.0
5.0
5.0
2.0
2.0
2.0
Heat Source Twinning kit: CMY-Y300VBK2
Heat Source Twinning kit: CMY-Y300VBK2
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-Y302S-G2 Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-Y302S-G2
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Water temperature
Cooling
27ºCD.B./19ºCW.B.
(81ºFD.B./66ºFW.B.)
30ºC (86ºF)
Heating
20ºCD.B. (68ºFD.B.)
20ºC (68ºF)
Pipe length
7.5m (24-9/16ft.)
*3 The ambient temperature of the heat source unit needs to be kept below 40ºCD.B.
*4 The ambient relative humidity of the heat source unit needs to be kept below 80%.
*5 The heat source Unit should not be installed at outdoor.
*6 Be sure to mount a strainer (more than 50 meshes) at the water inlet piping of the unit.
*7 Be sure to provide interlocking for the unit operation and water circuit.
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 67
Model
Power source
Cooling capacity
(Nominal)
Level difference
0m (0ft.)
Indoor
Water temperature
Cooling
27ºCD.B./19ºCW.B.
(81ºFD.B./66ºFW.B.)
30ºC (86ºF)
Heating
20ºCD.B. (68ºFD.B.)
20ºC (68ºF)
Pipe length
Level difference
7.5m (24-9/16ft.)
0m (0ft.)
*3 The ambient temperature of the heat source unit needs to be kept below 40ºCD.B.
*4 The ambient relative humidity of the heat source unit needs to be kept below 80%.
*5 The heat source Unit should not be installed at outdoor.
*6 Be sure to mount a strainer (more than 50 meshes) at the water inlet piping of the unit.
*7 Be sure to provide interlocking for the unit operation and water circuit.
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 68
HEAT SOURCE UNIT
WY (Heat Pump) Series
PQHY-P YSHM-A
HEAT SOURCE UNIT
WY (Heat Pump) Series
PQHY-P YSHM-A
Specifications
Specifications
Model
Power source
Cooling capacity
(Nominal)
PQHY-P750YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
85.0
290,000
17.19
29.0-27.5-26.5
4.94
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
95.0
324,100
18.27
30.8-29.3-28.2
5.19
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 2~50
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Circulating water
°C
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Circulating water
°C
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
54
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
19.05(3/4) Brazed
diameter [O.D.]
Gas pipe
mm (in.)
34.93(1-3/8) Brazed
Set Model
Model
PQHY-P250YHM-A PQHY-P250YHM-A PQHY-P250YHM-A
Circulating water Water flow rate
5.76 + 5.76 + 5.76
m3 / h
L/min
96 + 96 + 96
cfm
3.4 + 3.4 + 3.4
Pressure drop
kPa
17
17
17
Operating
4.5 + 4.5 + 4.5 ~ 7.2 + 7.2 + 7.2
m3 / h
volume range
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
6.3
6.3
6.3
Case heater
kW
0.035(240 V)
0.035(240 V)
0.035(240 V)
External finish
Acrylic painted steel plate
External dimension HxWxD
1,160(1,100 without 1,160(1,100 without 1,160(1,100 without
mm
legs) x 880 x 550
legs) x 880 x 550
legs) x 880 x 550
45-11/16(43-5/16 without 45-11/16(43-5/16 without 45-11/16(43-5/16 without
in.
legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15MPa (601 psi)
devices
Inverter circuit (COMP.)
Over-heat protection, Over-current protection
Compressor
Over-heat protection
Refrigerant
Type x original charge
R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs)
Net weight
kg (lbs)
195(430)
195(430)
195(430)
Heat exchanger
plate type
plate type
plate type
Water volume in
L
5.0
5.0
5.0
plate
Water pressure
MPa
2.0
2.0
2.0
Max.
Optional parts
54
19.05(3/4) Brazed
34.93(1-3/8) Brazed
PQHY-P300YHM-A
17
PQHY-P250YHM-A
5.76 + 5.76 + 5.76
96 + 96 + 96
3.4 + 3.4 + 3.4
17
PQHY-P250YHM-A
17
4.5 + 4.5 + 4.5 ~ 7.2 + 7.2 + 7.2
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
7.4
6.3
6.3
0.035(240 V)
0.035(240 V)
0.035(240 V)
Acrylic painted steel plate
1,160(1,100 without 1,160(1,100 without 1,160(1,100 without
legs) x 880 x 550
legs) x 880 x 550
legs) x 880 x 550
45-11/16(43-5/16 without 45-11/16(43-5/16 without 45-11/16(43-5/16 without
legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs)
195(430)
195(430)
195(430)
plate type
plate type
plate type
5.0
5.0
5.0
2.0
2.0
2.0
Heat Source Twinning kit: CMY-Y300VBK2
Heat Source Twinning kit: CMY-Y300VBK2
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-Y302S-G2 Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-Y302S-G2
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
Notes:
PQHY-P850YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
96.0
327,600
21.20
35.7-33.9-32.7
4.52
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
108.0
368,500
23.21
39.1-37.2-35.8
4.65
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 2~50
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Circulating water
°C
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Circulating water
°C
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
54.5
(measured in anechoic room)
Refrigerant piping Liquid pipe
mm (in.)
19.05(3/4) Brazed
diameter [O.D.]
Gas pipe
mm (in.)
41.28(1-5/8) Brazed
Set Model
Model
PQHY-P300YHM-A PQHY-P300YHM-A PQHY-P250YHM-A
Circulating water Water flow rate
5.76 + 5.76 + 5.76
m3 / h
L/min
96 + 96 + 96
cfm
3.4 + 3.4 + 3.4
Pressure drop
kPa
17
17
17
Operating
4.5 + 4.5 + 4.5 ~ 7.2 + 7.2 + 7.2
m3 / h
volume range
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Motor output
kW
7.4
7.4
6.3
Case heater
kW
0.035(240 V)
0.035(240 V)
0.035(240 V)
External finish
Acrylic painted steel plate
External dimension HxWxD
1,160(1,100 without 1,160(1,100 without 1,160(1,100 without
mm
legs) x 880 x 550
legs) x 880 x 550
legs) x 880 x 550
45-11/16(43-5/16 without 45-11/16(43-5/16 without 45-11/16(43-5/16 without
in.
legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15MPa (601 psi)
devices
Inverter circuit (COMP.)
Over-heat protection, Over-current protection
Compressor
Over-heat protection
Refrigerant
Type x original charge
R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs)
Net weight
kg (lbs)
195(430)
195(430)
195(430)
Heat exchanger
plate type
plate type
plate type
Water volume in
L
5.0
5.0
5.0
plate
Water pressure
MPa
2.0
2.0
2.0
Max.
Optional parts
PQHY-P900YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
101.0
344,600
23.22
39.1-37.2-35.8
4.34
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
113.0
385,600
25.67
43.3-41.1-39.6
4.40
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 2~50
55
19.05(3/4) Brazed
41.28(1-5/8) Brazed
PQHY-P300YHM-A
17
PQHY-P300YHM-A
5.76 + 5.76 + 5.76
96 + 96 + 96
3.4 + 3.4 + 3.4
17
PQHY-P300YHM-A
17
4.5 + 4.5 + 4.5 ~ 7.2 + 7.2 + 7.2
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
7.4
7.4
7.4
0.035(240 V)
0.035(240 V)
0.035(240 V)
Acrylic painted steel plate
1,160(1,100 without 1,160(1,100 without 1,160(1,100 without
legs) x 880 x 550
legs) x 880 x 550
legs) x 880 x 550
45-11/16(43-5/16 without 45-11/16(43-5/16 without 45-11/16(43-5/16 without
legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16 legs) x 34-11/16 x 21-11/16
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs)
195(430)
195(430)
195(430)
plate type
plate type
plate type
5.0
5.0
5.0
2.0
2.0
2.0
Heat Source Twinning kit: CMY-Y300VBK2
Heat Source Twinning kit: CMY-Y300VBK2
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-Y302S-G2 Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-Y302S-G2
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Water temperature
Cooling
27ºCD.B./19ºCW.B.
(81ºFD.B./66ºFW.B.)
30ºC (86ºF)
Heating
20ºCD.B. (68ºFD.B.)
20ºC (68ºF)
Pipe length
7.5m (24-9/16ft.)
*3 The ambient temperature of the heat source unit needs to be kept below 40ºCD.B.
*4 The ambient relative humidity of the heat source unit needs to be kept below 80%.
*5 The heat source Unit should not be installed at outdoor.
*6 Be sure to mount a strainer (more than 50 meshes) at the water inlet piping of the unit.
*7 Be sure to provide interlocking for the unit operation and water circuit.
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 69
Model
Power source
Cooling capacity
(Nominal)
PQHY-P800YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
90.0
307,100
19.18
32.3-30.7-29.6
4.69
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
100.0
341,200
20.74
35.0-33.2-32.0
4.82
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~130 % of heat source unit capacity
P15~P250 / 2~50
Level difference
0m (0ft.)
Indoor
Water temperature
Cooling
27ºCD.B./19ºCW.B.
(81ºFD.B./66ºFW.B.)
30ºC (86ºF)
Heating
20ºCD.B. (68ºFD.B.)
20ºC (68ºF)
Pipe length
Level difference
7.5m (24-9/16ft.)
0m (0ft.)
*3 The ambient temperature of the heat source unit needs to be kept below 40ºCD.B.
*4 The ambient relative humidity of the heat source unit needs to be kept below 80%.
*5 The heat source Unit should not be installed at outdoor.
*6 Be sure to mount a strainer (more than 50 meshes) at the water inlet piping of the unit.
*7 Be sure to provide interlocking for the unit operation and water circuit.
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 70
OUTDOOR UNIT
R2 Series
PURY-P YJM-A(-BS)
OUTDOOR UNIT
R2 Series
PURY-P YJM-A(-BS)
Specifications
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
*3 Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
*3 Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping High pressure
mm (in.)
diameter
Low pressure
mm (in.)
FAN
Type x Quantity
Air flow rate
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
*4 External static press.
Compressor
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External finish
External dimension HxWxD
mm
in.
Protection
devices
Refrigerant
Net weight
Heat exchanger
Optional parts
PURY-P200YJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
22.4
76,400
5.18
8.7-8.3-8.0
4.32
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
25.0
85,300
5.69
9.6-9.1-8.7
4.39
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~20
PURY-P250YJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
28.0
95,500
7.05
11.9-11.3-10.8
3.97
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
31.5
107,500
7.32
12.3-11.7-11.3
4.30
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~25
PURY-P300YJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
33.5
114,300
8.67
14.6-13.9-13.4
3.86
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
37.5
128,000
8.78
14.8-14.0-13.5
4.27
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~30
56
57
59
76
77
79
15.88(5/8) Brazed
19.05(3/4) Brazed
Propeller fan x 1
185
3,083
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
5.4
0.035(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
19.05(3/4) Brazed
22.2(7/8) Brazed
Propeller fan x 1
185
3,083
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
6.8
0.035(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
19.05(3/4) Brazed
22.2(7/8) Brazed
Propeller fan x 1
185
3,083
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
7.8
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without legs) x 920 x 760
1,710(1,650 without legs) x 920 x 760
1,710(1,650 without legs) x 920 x 760
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
*3 Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
*3 Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
External dimension HxWxD
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor
Over-heat protection
Fan motor
Thermal switch
Type x original charge
R410A x 9.5kg (21lbs)
kg (lbs)
240(530)
Salt-resistant cross fin & copper tube
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
BC controller: CMB-P104,105,106,108,1010,1013,1016V-G1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
R410A x 9.5kg (21lbs)
240(530)
Salt-resistant cross fin & copper tube
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
BC controller: CMB-P104,105,106,108,1010,1013,1016V-G1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
R410A x 9.5kg (21lbs)
245(541)
Salt-resistant cross fin & copper tube
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
BC controller: CMB-P104,105,106,108,1010,1013,1016V-G1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
Protection
devices
Refrigerant
Net weight
Heat exchanger
Optional parts
mm
PURY-P350YJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
40.0
136,500
11.33
19.1-18.1-17.5
3.53
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
45.0
153,500
10.89
18.3-17.4-16.8
4.13
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~35
PURY-P400YJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
45.0
153,500
13.55
22.8-21.7-20.9
3.32
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
50.0
170,600
12.75
21.5-20.4-19.7
3.92
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~40
PURY-P450YJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
50.0
170,600
14.49
24.4-23.2-22.3
3.45
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
56.0
191,100
14.58
24.6-23.3-22.5
3.84
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~45
60
61
62
80
81
82
19.05(3/4) Brazed
28.58(1-1/8) Brazed
Propeller fan x 1
225
3,750
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
9.9
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
22.2(7/8) Brazed
28.58(1-1/8) Brazed
Propeller fan x 1
225
3,750
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
10.2
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
22.2(7/8) Brazed
28.58(1-1/8) Brazed
Propeller fan x 2
360
6,000
12,712
Inverter-control, Direct-driven by motor
0.92 x 2
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
11.6
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without legs) x 1,220 x 760
1,710(1,650 without legs) x 1,220 x 760
1,710(1,650 without legs) x 1,750 x 760
Refrigerant piping High pressure
mm (in.)
diameter
Low pressure
mm (in.)
FAN
Type x Quantity
Air flow rate
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
*4 External static press.
Compressor
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External finish
67-3/8(65 without legs) x 36-1/4 x 29-15/16 67-3/8(65 without legs) x 36-1/4 x 29-15/16 67-3/8(65 without legs) x 36-1/4 x 29-15/16
High pressure protection
Notes:
67-3/8(65 without legs) x 48-1/16 x 2967-3/8(65 without legs) x 48-1/16 x 2967-3/8(65 without legs) x 68-15/16 x 29-15/16
in.
15/16
15/16
High pressure protection High pressure sensor, High pressure switch High pressure sensor, High pressure switch High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
at 4.15MPa (601 psi)
at 4.15MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection Over-heat protection, Over-current protection Over-heat protection, Over-current protection
Compressor
Over-heat protection
Over-heat protection
Over-heat protection
Fan motor
Thermal switch
Thermal switch
Thermal switch
Type x original charge
R410A x 11.8kg (27lbs)
R410A x 11.8kg (27lbs)
R410A x 11.8kg (27lbs)
kg (lbs)
270(596)
270(596)
320(706)
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
BC controller: CMB-P104,105,106,108,1010,1013,1016V-G1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,
CMB-P1016V-HB1
Joint: CMY-Y102SS-G2,CMY-Y102LSG2,CMY-R160-J1
Main BC controller: CMBP108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108VGB1,CMB-P1016V-HB1
Joint: CMY-Y102SS-G2,CMY-Y102LSG2,CMY-R160-J1
Main BC controller: CMBP108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108VGB1,CMB-P1016V-HB1
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*3 -5ºC DB (23ºF DB) / -6ºC WB (21ºF WB) to 21ºC DB (70ºF DB) / 15.5ºC WB (60ºF WB) with cooling/heating mixed operation.
*4 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 71
Model
Power source
Cooling capacity
(Nominal)
*3 -5ºC DB (23ºF DB) / -6ºC WB (21ºF WB) to 21ºC DB (70ºF DB) / 15.5ºC WB (60ºF WB) with cooling/heating mixed operation.
*4 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 72
OUTDOOR UNIT
R2 Series
PURY-P YSJM-A(1)(-BS)
OUTDOOR UNIT
R2 Series
PURY-P YSJM-A(1)(-BS)
Specifications
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
*3 Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
*3 Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping High pressure
diameter
Low pressure
Set Model
Model
FAN
Compressor
External finish
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
*4 External static press.
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External dimension HxWxD
mm
in.
Protection
devices
High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit High pressure
and distributor
Low pressure
Optional parts
mm (in.)
mm (in.)
PURY-P450YSJM-A1(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
50.0
170,600
12.50
21.1-20.0-19.3
4.00
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
56.0
191,100
13.30
22.4-21.3-20.5
4.21
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~45
PURY-P500YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
56.0
191,100
14.85
25.0-23.8-22.9
3.77
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
63.0
215,000
15.10
25.4-24.2-23.3
4.17
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~50
59
59.5
60
79
79.5
80
22.2(7/8) Brazed
28.58(1-1/8) Brazed
22.2(7/8) Brazed
28.58(1-1/8) Brazed
22.2(7/8) Brazed
28.58(1-1/8) Brazed
PURYPURYP200YJM-A(-BS)
P200YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
185
185
3,083
3,083
6,532
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
5.4
5.4
0.035(240 V)
0.035(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 920 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 9.5kg (21lbs) R410A x 9.5kg (21lbs)
240(530)
240(530)
Salt-resistant cross fin & copper tube
15.88(5/8) Brazed
15.88(5/8) Brazed
19.05(3/4) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYP200YJM-A(-BS)
P250YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
185
185
3,083
3,083
6,532
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
5.4
6.8
0.035(240 V)
0.035(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 920 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 9.5kg (21lbs) R410A x 9.5kg (21lbs)
240(530)
240(530)
Salt-resistant cross fin & copper tube
15.88(5/8) Brazed
19.05(3/4) Brazed
19.05(3/4) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYP250YJM-A(-BS)
P250YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
185
185
3,083
3,083
6,532
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
6.8
6.8
0.035(240 V)
0.035(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 920 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 9.5kg (21lbs) R410A x 9.5kg (21lbs)
240(530)
240(530)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
mm (in.)
mm (in.)
Type x Quantity
Air flow rate
PURY-P400YSJM-A1(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
45.0
153,500
10.73
18.1-17.2-16.5
4.19
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
50.0
170,600
11.62
19.6-18.6-17.9
4.30
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~40
Notes:
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
*3 Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
*3 Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping High pressure
diameter
Low pressure
Set Model
Model
FAN
Compressor
External finish
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
*4 External static press.
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External dimension HxWxD
mm
in.
Protection
devices
High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit High pressure
and distributor
Low pressure
Optional parts
mm (in.)
mm (in.)
PURY-P550YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
63.0
215,000
17.30
29.2-27.7-26.7
3.64
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
69.0
235,400
16.95
28.6-27.1-26.2
4.07
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
PURY-P600YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
69.0
235,400
19.65
33.1-31.5-30.3
3.51
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
76.5
261,000
19.07
32.1-30.5-29.4
4.01
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
61
61
62
81
81
82
22.2(7/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
PURYPURYP200YJM-A(-BS)
P300YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
185
185
3,083
3,083
6,532
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
5.4
7.8
0.035(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 920 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 9.5kg (21lbs) R410A x 9.5kg (21lbs)
240(530)
245(541)
Salt-resistant cross fin & copper tube
15.88(5/8) Brazed
19.05(3/4) Brazed
19.05(3/4) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYP250YJM-A(-BS)
P300YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
185
185
3,083
3,083
6,532
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
6.8
7.8
0.035(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 920 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 9.5kg (21lbs) R410A x 9.5kg (21lbs)
240(530)
245(541)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYP300YJM-A(-BS)
P300YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
185
185
3,083
3,083
6,532
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
7.8
7.8
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 920 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 9.5kg (21lbs) R410A x 9.5kg (21lbs)
245(541)
245(541)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
mm (in.)
mm (in.)
Type x Quantity
Air flow rate
PURY-P500YSJM-A1(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
56.0
191,100
14.73
24.8-23.6-22.7
3.80
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
63.0
215,000
15.07
25.4-24.1-23.2
4.18
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~50
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*3 -5ºC DB (23ºF DB) / -6ºC WB (21ºF WB) to 21ºC DB (70ºF DB) / 15.5ºC WB (60ºF WB) with cooling/heating mixed operation.
*4 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 73
Model
Power source
Cooling capacity
(Nominal)
*3 -5ºC DB (23ºF DB) / -6ºC WB (21ºF WB) to 21ºC DB (70ºF DB) / 15.5ºC WB (60ºF WB) with cooling/heating mixed operation.
*4 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 74
OUTDOOR UNIT
R2 Series
PURY-P YSJM-A(1)(-BS)
OUTDOOR UNIT
R2 Series
PURY-P YSJM-A(1)(-BS)
Specifications
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1 kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
*3 Outdoor
D.B.
Heating capacity
*2 kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
*3 Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping High pressure
diameter
Low pressure
Set Model
Model
FAN
Compressor
External finish
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
*4 External static press.
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External dimension HxWxD
mm
in.
Protection
devices
High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit High pressure
and distributor
Low pressure
Optional parts
mm (in.)
mm (in.)
PURY-P650YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
73.0
249,100
21.53
36.3-34.5-33.2
3.39
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
81.5
278,100
20.47
34.5-32.8-31.6
3.98
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
PURY-P700YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
80.0
273,000
23.95
40.4-38.4-37.0
3.34
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
88.0
300,300
22.33
37.6-35.8-34.5
3.94
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
62
62.5
63
82
82.5
83
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
34.93(1-3/8) Brazed
PURYPURYP250YJM-A(-BS)
P350YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
185
225
3,083
3,750
6,532
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
6.8
9.9
0.035(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) x 67-3/8(65 without legs) x
36-1/4 x 29-15/16
48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 9.5kg (21lbs) R410A x 11.8kg (27lbs)
240(530)
270(596)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYP300YJM-A(-BS)
P350YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
185
225
3,083
3,750
6,532
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
7.8
9.9
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) x 67-3/8(65 without legs) x
36-1/4 x 29-15/16
48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 9.5kg (21lbs) R410A x 11.8kg (27lbs)
245(541)
270(596)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYP300YJM-A(-BS)
P400YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
185
225
3,083
3,750
6,532
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
7.8
10.2
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) x 67-3/8(65 without legs) x
36-1/4 x 29-15/16
48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 9.5kg (21lbs) R410A x 11.8kg (27lbs)
245(541)
270(596)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
22.2(7/8) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-R200VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P1016V-HA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
mm (in.)
mm (in.)
Type x Quantity
Air flow rate
PURY-P600YSJM-A1(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
69.0
235,400
19.16
32.3-30.7-29.6
3.60
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
76.5
261,000
18.61
31.4-29.8-28.7
4.11
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
Notes:
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
*3 Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
*3 Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping High pressure
diameter
Low pressure
Set Model
Model
FAN
Compressor
External finish
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
*4 External static press.
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External dimension HxWxD
mm
in.
Protection
devices
High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit High pressure
and distributor
Low pressure
Optional parts
mm (in.)
mm (in.)
PURY-P750YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
85.0
290,000
26.47
44.6-42.4-40.9
3.21
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
95.0
324,100
24.05
40.6-38.5-37.1
3.95
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
PURY-P800YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
90.0
307,100
28.30
47.7-45.3-43.7
3.18
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
100.0
341,200
26.04
43.9-41.7-40.2
3.84
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
63
63.5
64
83
83.5
84
28.58(1-1/8) Brazed
34.93(1-3/8) Brazed
28.58(1-1/8) Brazed
34.93(1-3/8) Brazed
28.58(1-1/8) Brazed
34.93(1-3/8) Brazed
PURYPURYP350YJM-A(-BS)
P350YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
225
225
3,750
3,750
7,945
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
9.9
9.9
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,220 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 48-1/16 x 29-15/16
x 48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
270(596)
270(596)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
19.05(3/4) Brazed
28.58(1-1/8) Brazed
Outdoor Twinning kit: CMY-R200VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P1016V-HA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYP350YJM-A(-BS)
P400YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
225
225
3,750
3,750
7,945
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
9.9
10.2
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,220 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 48-1/16 x 29-15/16
x 48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
270(596)
270(596)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
22.2(7/8) Brazed
28.58(1-1/8) Brazed
Outdoor Twinning kit: CMY-R200VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P1016V-HA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYP400YJM-A(-BS)
P400YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
225
225
3,750
3,750
7,945
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
10.2
10.2
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,220 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 48-1/16 x 29-15/16
x 48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
270(596)
270(596)
Salt-resistant cross fin & copper tube
22.2(7/8) Brazed
22.2(7/8) Brazed
28.58(1-1/8) Brazed
Outdoor Twinning kit: CMY-R200VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P1016V-HA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
mm (in.)
mm (in.)
Type x Quantity
Air flow rate
PURY-P700YSJM-A1(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
80.0
273,000
23.39
39.4-37.5-36.1
3.42
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
88.0
300,300
21.78
36.7-34.9-33.6
4.04
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*3 -5ºC DB (23ºF DB) / -6ºC WB (21ºF WB) to 21ºC DB (70ºF DB) / 15.5ºC WB (60ºF WB) with cooling/heating mixed operation.
*4 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 75
Model
Power source
Cooling capacity
(Nominal)
*3 -5ºC DB (23ºF DB) / -6ºC WB (21ºF WB) to 21ºC DB (70ºF DB) / 15.5ºC WB (60ºF WB) with cooling/heating mixed operation.
*4 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 76
OUTDOOR UNIT
R2 Series - High COP
PURY-EP YJM-A(-BS)
OUTDOOR UNIT
R2 Series
PURY-P YSJM-A(1)
(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
*3 Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
*3 Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping High pressure
diameter
Low pressure
Set Model
Model
FAN
Compressor
External finish
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
*4 External static press.
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External dimension HxWxD
mm
in.
Protection
devices
High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit High pressure
and distributor
Low pressure
Optional parts
mm (in.)
mm (in.)
PURY-P800YSJM-A1(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
90.0
307,100
26.62
44.9-42.6-41.1
3.38
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
100.0
341,200
25.77
43.5-41.3-39.8
3.88
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
PURY-P850YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
96.0
327,600
29.26
49.3-46.9-45.2
3.28
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
108.0
368,500
28.42
47.9-45.5-43.9
3.80
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
PURY-P900YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
101.0
344,600
30.23
51.0-48.4-46.7
3.34
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
113.0
385,600
30.05
50.7-48.1-46.4
3.76
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
64
64.5
65
84
84.5
85
28.58(1-1/8) Brazed
34.93(1-3/8) Brazed
28.58(1-1/8) Brazed
41.28(1-5/8) Brazed
28.58(1-1/8) Brazed
41.28(1-5/8) Brazed
PURYPURYP350YJM-A(-BS)
P450YJM-A(-BS)
Propeller fan x 1
Propeller fan x 2
225
360
3,750
6,000
7,945
12,712
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
9.9
11.6
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,220 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 48-1/16 x 29-15/16 x 68-15/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
270(596)
320(706)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
22.2(7/8) Brazed
28.58(1-1/8) Brazed
Outdoor Twinning kit: CMY-R100XLVBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P1016V-HA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYP400YJM-A(-BS)
P450YJM-A(-BS)
Propeller fan x 1
Propeller fan x 2
225
360
3,750
6,000
7,945
12,712
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
10.2
11.6
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,220 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 48-1/16 x 29-15/16 x 68-15/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
270(596)
320(706)
Salt-resistant cross fin & copper tube
22.2(7/8) Brazed
22.2(7/8) Brazed
28.58(1-1/8) Brazed
Outdoor Twinning kit: CMY-R200XLVBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P1016V-HA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYP450YJM-A(-BS)
P450YJM-A(-BS)
Propeller fan x 2
Propeller fan x 2
360
360
6,000
6,000
12,712
12,712
Inverter-control, Direct-driven by motor
0.92 x 2
0.92 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
11.6
11.6
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,750 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 68-15/16 x 29-15/16 x 68-15/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
320(706)
320(706)
Salt-resistant cross fin & copper tube
22.2(7/8) Brazed
22.2(7/8) Brazed
28.58(1-1/8) Brazed
Outdoor Twinning kit: CMY-R200XLVBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P1016V-HA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
mm (in.)
mm (in.)
Type x Quantity
Air flow rate
Specifications
Notes:
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
*3 Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
*3 Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
PURY-EP200YJM-A(-BS)
PURY-EP250YJM-A(-BS)
PURY-EP300YJM-A(-BS)
PURY-EP350YJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz 3-phase 4-wire 380-400-415V 50/60Hz 3-phase 4-wire 380-400-415V 50/60Hz 3-phase 4-wire 380-400-415V 50/60Hz
22.4
28.0
33.5
40.0
76,400
95,500
114,300
136,500
5.07
6.76
8.25
10.28
8.5-8.1-7.8
11.4-10.8-10.4
13.9-13.2-12.7
17.3-16.4-15.8
4.41
4.14
4.06
3.89
15.0~24.0°C(59~75°F)
15.0~24.0°C(59~75°F)
15.0~24.0°C(59~75°F)
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
-5.0~46.0°C(23~115°F)
-5.0~46.0°C(23~115°F)
-5.0~46.0°C(23~115°F)
25.0
31.5
37.5
45.0
85,300
107,500
128,000
153,500
5.56
7.15
8.60
10.58
9.3-8.9-8.5
12.0-11.4-11.0
14.5-13.7-13.2
17.8-16.9-16.3
4.49
4.40
4.36
4.25
15.0~27.0°C(59~81°F)
15.0~27.0°C(59~81°F)
15.0~27.0°C(59~81°F)
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
-20.0~15.5°C(-4~60°F)
-20.0~15.5°C(-4~60°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity 50~150 % of outdoor unit capacity 50~150 % of outdoor unit capacity 50~150 % of outdoor unit capacity
P15~P250 / 1~20
P15~P250 / 1~25
P15~P250 / 1~30
P15~P250 / 1~35
57
60
77
Refrigerant piping High pressure
mm (in.)
15.88(5/8) Brazed
diameter
Low pressure
mm (in.)
19.05(3/4) Brazed
FAN
Type x Quantity
Propeller fan x 1
3
Air flow rate
185
m /min
L/s
3,083
cfm
6,532
Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
*4 External static press.
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Motor output
kW
5.4
Case heater
kW
0.035(240 V)
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
1,710(1,650 without legs)
mm
x 920 x 760
67-3/8(65 without legs) x 36-1/4
in.
x 29-15/16
Protection
High pressure protection High pressure sensor, High pressure
devices
switch at 4.15MPa (601 psi)
Inverter circuit (COMP./FAN) Over-heat protection, Over-current protection
Compressor
Over-heat protection
Fan motor
Thermal switch
Refrigerant
Type x original charge
R410A x 9.5kg (21lbs)
Net weight
kg (lbs)
240(530)
Heat exchanger
Salt-resistant cross fin & copper tube
Optional parts
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,
CMY-R160-J1
BC controller: CMB-P104,105,106,108,
1010,1013,1016V-G1
Main BC controller: CMB-P108,1010,
1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,
CMB-P1016V-HB1
60
61
80
80
81
19.05(3/4) Brazed
22.2(7/8) Brazed
Propeller fan x 1
225
3,750
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
6.8
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without legs)
x 1,220 x 760
67-3/8(65 without legs)
x 48-1/16 x 29-15/16
High pressure sensor, High pressure
switch at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
R410A x 11.8kg (27lbs)
270(596)
Salt-resistant cross fin & copper tube
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,
CMY-R160-J1
BC controller: CMB-P104,105,106,108,
1010,1013,1016V-G1
Main BC controller: CMB-P108,1010,
1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,
CMB-P1016V-HB1
19.05(3/4) Brazed
22.2(7/8) Brazed
Propeller fan x 1
225
3,750
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
7.8
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without legs)
x 1,220 x 760
67-3/8(65 without legs)
x 48-1/16 x 29-15/16
High pressure sensor, High pressure
switch at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
R410A x 11.8kg (27lbs)
270(596)
Salt-resistant cross fin & copper tube
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,
CMY-R160-J1
BC controller: CMB-P104,105,106,108,
1010,1013,1016V-G1
Main BC controller: CMB-P108,1010,
1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,
CMB-P1016V-HB1
19.05(3/4) Brazed
28.58(1-1/8) Brazed
Propeller fan x 2
360
6,000
12,712
Inverter-control, Direct-driven by motor
0.92 x 2
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
9.9
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without legs)
x 1,750 x 760
67-3/8(65 without legs)
x 68-15/16 x 29-15/16
High pressure sensor, High pressure
switch at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
R410A x 11.8kg (27lbs)
320(706)
Salt-resistant cross fin & copper tube
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,
CMY-R160-J1
BC controller: CMB-P104,105,106,108,
1010,1013,1016V-G1
Main BC controller: CMB-P108,1010,
1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,
CMB-P1016V-HB1
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*3 -5ºC DB (23ºF DB) / -6ºC WB (21ºF WB) to 21ºC DB (70ºF DB) / 15.5ºC WB (60ºF WB) with cooling/heating mixed operation.
*4 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 77
Model
Power source
Cooling capacity
(Nominal)
*3 -5ºC DB (23ºF DB) / -6ºC WB (21ºF WB) to 21ºC DB (70ºF DB) / 15.5ºC WB (60ºF WB) with cooling/heating mixed operation.
*4 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 78
OUTDOOR UNIT
R2 Series - High COP
PURY-EP YSJM-A(-BS)
OUTDOOR UNIT
R2 Series - High COP
PURY-EP YSJM-A(1)(-BS)
Specifications
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
*3 Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
*3 Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping High pressure
diameter
Low pressure
Set Model
Model
FAN
Compressor
External finish
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
*4 External static press.
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External dimension HxWxD
mm
in.
Protection
devices
High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit High pressure
and distributor
Low pressure
Optional parts
mm (in.)
mm (in.)
PURY-EP450YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
50.0
170,600
11.99
20.2-19.2-18.5
4.17
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
56.0
191,100
12.87
21.7-20.6-19.8
4.35
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~40
PURY-EP500YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
56.0
191,100
13.62
22.9-21.8-21.0
4.11
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
63.0
215,000
14.38
24.2-23.0-22.2
4.38
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~50
60
62
62
80
82
82
22.2(7/8) Brazed
28.58(1-1/8) Brazed
22.2(7/8) Brazed
28.58(1-1/8) Brazed
22.2(7/8) Brazed
28.58(1-1/8) Brazed
PURYPURYEP200YJM-A(-BS) EP200YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
185
185
3,083
3,083
6,532
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
5.4
5.4
0.035(240 V)
0.035(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 920 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 9.5kg (21lbs) R410A x 9.5kg (21lbs)
240(530)
240(530)
Salt-resistant cross fin & copper tube
15.88(5/8) Brazed
15.88(5/8) Brazed
19.05(3/4) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYEP200YJM-A(-BS) EP250YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
185
225
3,083
3,750
6,532
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
5.4
6.8
0.035(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 9.5kg (21lbs) R410A x 11.8kg (27lbs)
240(530)
270(596)
Salt-resistant cross fin & copper tube
15.88(5/8) Brazed
19.05(3/4) Brazed
19.05(3/4) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYEP200YJM-A(-BS) EP300YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
185
225
3,083
3,750
6,532
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
5.4
7.8
0.035(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 920 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 36-1/4 x 29-15/16
x 48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 9.5kg (21lbs) R410A x 11.8kg (27lbs)
240(530)
270(596)
Salt-resistant cross fin & copper tube
15.88(5/8) Brazed
19.05(3/4) Brazed
19.05(3/4) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
mm (in.)
mm (in.)
Type x Quantity
Air flow rate
PURY-EP400YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
45.0
153,500
10.41
17.5-16.6-16.0
4.32
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
50.0
170,600
11.36
19.1-18.2-17.5
4.40
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~40
Notes:
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
*3 Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
*3 Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping High pressure
diameter
Low pressure
Set Model
Model
FAN
Compressor
External finish
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
*4 External static press.
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External dimension HxWxD
mm
in.
Protection
devices
High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit High pressure
and distributor
Low pressure
Optional parts
mm (in.)
mm (in.)
PURY-EP550YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
63.0
215,000
15.40
25.9-24.6-23.8
4.09
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
69.0
235,400
15.93
26.8-25.5-24.6
4.33
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
PURY-EP600YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
69.0
235,400
16.87
28.4-27.0-26.0
4.09
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
76.5
261,000
17.38
29.3-27.8-26.8
4.40
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
63
63
63
83
83
83
22.2(7/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
PURYPURYEP250YJM-A(-BS) EP250YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
225
225
3,750
3,750
7,945
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
6.8
6.8
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,220 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 48-1/16 x 29-15/16
x 48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
270(596)
270(596)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYEP250YJM-A(-BS) EP300YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
225
225
3,750
3,750
7,945
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
6.8
7.8
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,220 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 48-1/16 x 29-15/16
x 48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
270(596)
270(596)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYEP300YJM-A(-BS) EP300YJM-A(-BS)
Propeller fan x 1
Propeller fan x 1
225
225
3,750
3,750
7,945
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
7.8
7.8
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,220 x 760
legs) x 1,220 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 48-1/16 x 29-15/16
x 48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
270(596)
270(596)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-R100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
mm (in.)
mm (in.)
Type x Quantity
Air flow rate
PURY-EP500YSJM-A1(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
56.0
191,100
13.96
23.5-22.3-21.5
4.01
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
63.0
215,000
14.78
24.9-23.7-22.8
4.26
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~50
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
*3 -5ºC DB (23ºF DB) / -6ºC WB (21ºF WB) to 21ºC DB (70ºF DB) / 15.5ºC WB (60ºF WB) with cooling/heating mixed operation.
*4 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 79
Model
Power source
Cooling capacity
(Nominal)
*3 -5ºC DB (23ºF DB) / -6ºC WB (21ºF WB) to 21ºC DB (70ºF DB) / 15.5ºC WB (60ºF WB) with cooling/heating mixed operation.
*4 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 80
HEAT SOURCE UNIT
WR2 (Heat Recovery) Series
PQRY-P YHM-A
OUTDOOR UNIT
R2 Series - High COP
PURY-EP YSJM-A(1)
(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
PURY-EP600YSJM-A1(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
69.0
235,400
17.82
30.0-28.5-27.5
3.87
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
76.5
261,000
18.30
30.8-29.3-28.2
4.18
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
PURY-EP650YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
73.0
249,100
19.01
32.0-30.4-29.3
3.84
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
81.5
278,100
19.73
33.3-31.6-30.4
4.13
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
PURY-EP700YSJM-A(-BS)
3-phase 4-wire 380-400-415V 50/60Hz
80.0
273,000
21.22
35.8-34.0-32.8
3.77
15.0~24.0°C(59~75°F)
-5.0~46.0°C(23~115°F)
88.0
300,300
22.05
37.2-35.3-34.0
3.99
15.0~27.0°C(59~81°F)
-20.0~15.5°C(-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 2~50
63.5
63.5
64
83.5
83.5
84
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
34.93(1-3/8) Brazed
PURYPURYEP250YJM-A(-BS) EP350YJM-A(-BS)
Propeller fan x 1
Propeller fan x 2
225
360
3,750
6,000
7,945
12,712
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
6.8
9.9
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,220 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 48-1/16 x 29-15/16 x 68-15/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
270(596)
320(706)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-R100XLVBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYEP300YJM-A(-BS) EP350YJM-A(-BS)
Propeller fan x 1
Propeller fan x 2
225
360
3,750
6,000
7,945
12,712
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
7.8
9.9
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,220 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 48-1/16 x 29-15/16 x 68-15/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
270(596)
320(706)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
19.05(3/4) Brazed
22.2(7/8) Brazed
Outdoor Twinning kit: CMY-R100XLVBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P108,1010,1013,1016V-GA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
PURYPURYEP350YJM-A(-BS) EP350YJM-A(-BS)
Propeller fan x 2
Propeller fan x 2
360
360
6,000
6,000
12,712
12,712
Inverter-control, Direct-driven by motor
0.92 x 2
0.92 x 2
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
9.9
9.9
0.045(240 V)
0.045(240 V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without 1,710(1,650 without
legs) x 1,750 x 760
legs) x 1,750 x 760
67-3/8(65 without legs) 67-3/8(65 without legs)
x 68-15/16 x 29-15/16 x 68-15/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
R410A x 11.8kg (27lbs) R410A x 11.8kg (27lbs)
320(706)
320(706)
Salt-resistant cross fin & copper tube
19.05(3/4) Brazed
19.05(3/4) Brazed
28.58(1-1/8) Brazed
Outdoor Twinning kit: CMY-R100XLVBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-R160-J1
Main BC controller: CMB-P1016V-HA1
Sub BC controller: CMB-P104,108V-GB1,CMB-P1016V-HB1
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
*3 Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
*3 Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Power pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping High pressure
diameter
Low pressure
Set Model
Model
FAN
mm (in.)
mm (in.)
Type x Quantity
Air flow rate
Compressor
External finish
m3/min
L/s
cfm
Driving mechanism
Motor output
kW
*4 External static press.
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External dimension HxWxD
mm
in.
Protection
devices
High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit High pressure
and distributor
Low pressure
Optional parts
mm (in.)
mm (in.)
Specifications
Notes:
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Circulating water
°C
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Circulating water
°C
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping High pressure
mm (in.)
diameter [O.D.]
Low pressure
mm (in.)
Circulating water Water flow rate
m3 / h
L/min
cfm
Pressure drop
kPa
Operating
m3 / h
volume range
Compressor
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External finish
External dimension HxWxD
mm
Protection
devices
Refrigerant
Net weight
Heat exchanger
Optional parts
PQRY-P200YHM-A
3-phase 4-wire 380-400-415V 50/60Hz
22.4
76,400
3.96
6.6-6.3-6.1
5.65
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
25.0
85,300
4.12
6.9-6.6-6.3
6.06
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~150 % of heat source unit capacity
P15~P250 / 1~20
PQRY-P250YHM-A
3-phase 4-wire 380-400-415V 50/60Hz
28.0
95,500
5.51
9.3-8.8-8.5
5.08
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
31.5
107,500
5.80
9.7-9.3-8.9
5.43
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~150 % of heat source unit capacity
P15~P250 / 1~25
PQRY-P300YHM-A
3-phase 4-wire 380-400-415V 50/60Hz
33.5
114,300
7.44
12.5-11.9-11.5
4.50
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
37.5
128,000
8.15
13.7-13.0-12.5
4.60
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~150 % of heat source unit capacity
P15~P250 / 1~30
47
49
50
15.88(5/8) Brazed
19.05(3/4) Brazed
5.76
96
3.4
17
19.05(3/4) Brazed
22.2(7/8) Brazed
5.76
96
3.4
17
19.05(3/4) Brazed
22.2(7/8) Brazed
5.76
96
3.4
17
4.5 ~ 7.2
4.5 ~ 7.2
4.5 ~ 7.2
Inverter scroll hermetic compressor
Inverter
4.6
0.035(240 V)
Acrylic painted steel plate
Inverter scroll hermetic compressor
Inverter
6.3
0.035(240 V)
Acrylic painted steel plate
Inverter scroll hermetic compressor
Inverter
7.4
0.035(240 V)
Acrylic painted steel plate
1,160(1,100 without legs) x 880 x 550
1,160(1,100 without legs) x 880 x 550
45-11/16(43-5/16 without legs) x 34-11/16 x 45-11/16(43-5/16 without legs) x 34-11/16 x
in.
21-11/16
21-11/16
High pressure protection High pressure sensor, High pressure switch at 4.15MPa (601 psi) High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Inverter circuit (COMP.)
Over-heat protection, Over-current protection Over-heat protection, Over-current protection
Compressor
Over-heat protection
Over-heat protection
Type x original charge
R410A x 5.0kg (12lbs)
R410A x 5.0kg (12lbs)
kg (lbs)
181(400)
181(400)
plate type
plate type
Water volume in
L
5.0
5.0
plate
Water pressure
MPa
2.0
2.0
Max.
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-R160-J1 Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-R160-J1
1,160(1,100 without legs) x 880 x 550
45-11/16(43-5/16 without legs) x 34-11/16 x
21-11/16
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
R410A x 5.0kg (12lbs)
181(400)
plate type
5.0
2.0
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-R160-J1
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Water temperature
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27ºCD.B./19ºCW.B.
(81ºFD.B./66ºFW.B.)
30ºC (86ºF)
Heating
20ºC DB(68ºF DB)
7ºC DB/6ºC WB(45ºF DB/43ºF WB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20ºCD.B. (68ºFD.B.)
20ºC (68ºF)
*3 -5ºC DB (23ºF DB) / -6ºC WB (21ºF WB) to 21ºC DB (70ºF DB) / 15.5ºC WB (60ºF WB) with cooling/heating mixed operation.
*4 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 81
Model
Power source
Cooling capacity
(Nominal)
Pipe length
Level difference
7.5m (24-9/16ft.)
0m (0ft.)
*3 The ambient temperature of the heat source unit needs to be kept below 40ºCD.B.
*4 The ambient relative humidity of the heat source unit needs to be kept below 80%.
*5 The heat source Unit should not be installed at outdoor.
*6 Be sure to mount a strainer (more than 50 meshes) at the water inlet piping of the unit.
*7 Be sure to provide interlocking for the unit operation and water circuit.
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 82
HEAT SOURCE UNIT
WR2 (Heat Recovery) Series
PQRY-P YSHM-A
HEAT SOURCE UNIT
WR2 (Heat Recovery) Series
PQRY-P YSHM-A
Specifications
Specifications
Model
Power source
Cooling capacity
(Nominal)
PQRY-P400YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
45.0
153,500
8.32
14.0-13.3-12.8
5.40
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
50.0
170,600
8.65
14.6-13.8-13.3
5.78
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~150 % of heat source unit capacity
P15~P250 / 1~40
*1
kW
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Circulating water
°C
Heating capacity
*2
kW
(Nominal)
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Circulating water
°C
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
50
(measured in anechoic room)
Refrigerant piping High pressure
mm (in.)
22.2(7/8) Brazed
diameter [O.D.]
Low pressure
mm (in.)
28.58(1-1/8) Brazed
Set Model
Model
PQRY-P200YHM-A PQRY-P200YHM-A
Circulating water Water flow rate
5.76 + 5.76
m3 / h
L/min
96 + 96
cfm
3.4 + 3.4
Pressure drop
kPa
17
17
Operating
4.5 + 4.5 ~ 7.2 + 7.2
m3 / h
volume range
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Motor output
kW
4.6
4.6
Case heater
kW
0.035(240 V)
0.035(240 V)
External finish
Acrylic painted steel plate
External dimension HxWxD
1,160(1,100 without 1,160(1,100 without
mm
legs) x 880 x 550
legs) x 880 x 550
45-11/16(43-5/16 without legs) 45-11/16(43-5/16 without legs)
in.
x 34-11/16 x 21-11/16
x 34-11/16 x 21-11/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15MPa (601 psi)
devices
Inverter circuit (COMP.)
Over-heat protection, Over-current protection
Compressor
Over-heat protection
Refrigerant
Type x original charge
R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs)
Net weight
kg (lbs)
181(400)
181(400)
Heat exchanger
plate type
plate type
Water volume in
L
5.0
5.0
plate
Water pressure
MPa
2.0
2.0
Max.
Optional parts
PQRY-P450YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
50.0
170,600
9.94
16.7-15.9-15.3
5.03
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
56.0
191,100
10.42
17.5-16.7-16.1
5.37
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~150 % of heat source unit capacity
P15~P250 / 1~45
51
52
22.2(7/8) Brazed
28.58(1-1/8) Brazed
22.2(7/8) Brazed
28.58(1-1/8) Brazed
PQRY-P250YHM-A PQRY-P200YHM-A
5.76 + 5.76
96 + 96
3.4 + 3.4
17
17
PQRY-P250YHM-A PQRY-P250YHM-A
5.76 + 5.76
96 + 96
3.4 + 3.4
17
17
4.5 + 4.5 ~ 7.2 + 7.2
4.5 + 4.5 ~ 7.2 + 7.2
Inverter scroll hermetic compressor
Inverter
Inverter
6.3
4.6
0.035(240 V)
0.035(240 V)
Acrylic painted steel plate
1,160(1,100 without 1,160(1,100 without
legs) x 880 x 550
legs) x 880 x 550
45-11/16(43-5/16 without legs) 45-11/16(43-5/16 without legs)
x 34-11/16 x 21-11/16
x 34-11/16 x 21-11/16
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs)
181(400)
181(400)
plate type
plate type
Inverter scroll hermetic compressor
Inverter
Inverter
6.3
6.3
0.035(240 V)
0.035(240 V)
Acrylic painted steel plate
1,160(1,100 without 1,160(1,100 without
legs) x 880 x 550
legs) x 880 x 550
45-11/16(43-5/16 without legs) 45-11/16(43-5/16 without legs)
x 34-11/16 x 21-11/16
x 34-11/16 x 21-11/16
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Over-heat protection, Over-current protection
Over-heat protection
R410A x 5.0kg (12lbs) R410A x 5.0kg (12lbs)
181(400)
181(400)
plate type
plate type
5.0
5.0
5.0
5.0
2.0
2.0
2.0
2.0
Heat Source Twinning kit: CMY-Q100VBK Heat Source Twinning kit: CMY-Q100VBK Heat Source Twinning kit: CMY-Q100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-R160-J1 Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-R160-J1 Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-R160-J1
Notes:
Model
Power source
Cooling capacity
(Nominal)
*1
*1
Power input
Current input
EER
Temp. range of
Indoor
cooling
Circulating water
Heating capacity
*2
(Nominal)
*2
Power input
Current input
COP
Temp. range of
Indoor
heating
Circulating water
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
(measured in anechoic room)
Refrigerant piping High pressure
diameter [O.D.]
Low pressure
Set Model
Model
Circulating water Water flow rate
Compressor
Pressure drop
Operating
volume range
Type x Quantity
Starting method
Motor output
Case heater
kW
BTU / h
kW
A
kW / kW
W.B.
°C
kW
BTU / h
kW
A
kW / kW
D.B.
°C
PQRY-P550YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
63.0
215,000
13.60
22.9-21.8-21.0
4.63
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
69.0
235,400
14.65
24.7-23.4-22.6
4.70
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~150 % of heat source unit capacity
P15~P250 / 2~50 (Connectable branch pipe number is max. 48.)
PQRY-P600YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
69.0
235,400
15.62
26.3-25.0-24.1
4.41
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
76.5
261,000
17.12
28.9-27.4-26.4
4.46
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~150 % of heat source unit capacity
P15~P250 / 2~50 (Connectable branch pipe number is max. 48.)
dB <A>
52.5
53
mm (in.)
mm (in.)
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
PQRY-P300YHM-A
m3 / h
L/min
cfm
kPa
m3 / h
PQRY-P250YHM-A
5.76 + 5.76
96 + 96
3.4 + 3.4
17
PQRY-P300YHM-A
17
17
4.5 + 4.5 ~ 7.2 + 7.2
PQRY-P300YHM-A
5.76 + 5.76
96 + 96
3.4 + 3.4
17
4.5 + 4.5 ~ 7.2 + 7.2
Inverter scroll hermetic compressor
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
Inverter
kW
7.4
6.3
7.4
7.4
kW
0.035(240 V)
0.035(240 V)
0.035(240 V)
0.035(240 V)
External finish
Acrylic painted steel plate
Acrylic painted steel plate
External dimension HxWxD
1,160(1,100 without legs) x 880 1,160(1,100 without legs) x 880 1,160(1,100 without legs) x 880 1,160(1,100 without legs) x 880
mm
x 550
x 550
x 550
x 550
45-11/16(43-5/16 without legs) x 45-11/16(43-5/16 without legs) x 45-11/16(43-5/16 without legs) x 45-11/16(43-5/16 without legs) x
in.
34-11/16 x 21-11/16
34-11/16 x 21-11/16
34-11/16 x 21-11/16
34-11/16 x 21-11/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15MPa (601 psi) High pressure sensor, High pressure switch at 4.15MPa (601 psi)
devices
Inverter circuit (COMP.)
Over-heat protection, Over-current protection
Over-heat protection, Over-current protection
Compressor
Over-heat protection
Over-heat protection
Over-heat protection
Over-heat protection
Refrigerant
Type x original charge
R410A x 5.0kg (12lbs)
R410A x 5.0kg (12lbs)
R410A x 5.0kg (12lbs)
R410A x 5.0kg (12lbs)
Net weight
kg (lbs)
181(400)
181(400)
181(400)
181(400)
Heat exchanger
plate type
plate type
plate type
plate type
Water volume in
L
5.0
5.0
5.0
5.0
plate
Water pressure
MPa
2.0
2.0
2.0
2.0
Max.
Optional parts
Heat Source Twinning kit: CMY-Q100VBK
Heat Source Twinning kit: CMY-Q100VBK
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-R160-J1
Joint: CMY-Y102SS-G2,CMY-Y102LS-G2,CMY-Y202S-G2,CMY-R160-J1
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Water temperature
Cooling
27ºCD.B./19ºCW.B.
(81ºFD.B./66ºFW.B.)
30ºC (86ºF)
Heating
20ºCD.B. (68ºFD.B.)
20ºC (68ºF)
Pipe length
7.5m (24-9/16ft.)
*3 The ambient temperature of the heat source unit needs to be kept below 40ºCD.B.
*4 The ambient relative humidity of the heat source unit needs to be kept below 80%.
*5 The heat source Unit should not be installed at outdoor.
*6 Be sure to mount a strainer (more than 50 meshes) at the water inlet piping of the unit.
*7 Be sure to provide interlocking for the unit operation and water circuit.
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 83
PQRY-P500YSHM-A
3-phase 4-wire 380-400-415V 50/60Hz
56.0
191,100
11.57
19.5-18.5-17.8
4.84
15.0~24.0°C(59~75°F)
10.0~45.0°C(50~113°F)
63.0
215,000
12.06
20.3-19.3-18.6
5.22
15.0~27.0°C(59~81°F)
10.0~45.0°C(50~113°F)
50~150 % of heat source unit capacity
P15~P250 / 1~50 (Connectable branch pipe number is max. 48.)
Level difference
0m (0ft.)
Indoor
Water temperature
Cooling
27ºCD.B./19ºCW.B.
(81ºFD.B./66ºFW.B.)
30ºC (86ºF)
Heating
20ºCD.B. (68ºFD.B.)
20ºC (68ºF)
Pipe length
Level difference
7.5m (24-9/16ft.)
0m (0ft.)
*3 The ambient temperature of the heat source unit needs to be kept below 40ºCD.B.
*4 The ambient relative humidity of the heat source unit needs to be kept below 80%.
*5 The heat source Unit should not be installed at outdoor.
*6 Be sure to mount a strainer (more than 50 meshes) at the water inlet piping of the unit.
*7 Be sure to provide interlocking for the unit operation and water circuit.
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specification may be subject to change without notice.
Outdoor unit
Page 84
OUTDOOR UNIT
Y Series
PUHY-RP YJM-B(-BS)
OUTDOOR UNIT
Y Series
PUHY-RP YSJM-B(-BS)
Specifications
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1
kW
*1 kcal / h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 kcal / h
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
PUHY-RP200YJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
22.4
19,300
76,400
5.68
9.5-9.1-8.7
3.94
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
25.0
21,500
85,300
5.69
9.6-9.1-8.7
4.39
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~17
PUHY-RP250YJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
28.0
24,100
95,500
7.62
12.8-12.2-11.7
3.67
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
31.5
27,100
107,500
7.22
12.1-11.5-11.1
4.36
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~21
56
Refrigerant piping Liquid pipe
mm (in.)
12.7 (1/2) Brazed
diameter
Gas pipe
mm (in.)
28.58 (1-1/8) Brazed
FAN
Type x Quantity
Propeller fan x 1
Air flow rate
185
m3/min
L/s
3,083
cfm
6,532
Control, Driving mechanism Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
*3 External static press.
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Motor output
kW
4.8
Case heater
kW
0.035 (240V)
External finish
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
1,710(1,650 without legs)
mm
x 920 x 760
67-3/8 (65 without legs)
in.
x 36-1/4 x 29-15/16
Protection
High pressure protection High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
devices
Inverter circuit (COMP./ FAN)
Over-heat protection,
Over-current protection
Compressor
Over-heat protection
Fan motor
Thermal switch
Refrigerant
Type x original charge
R410A x 6.5kg (15lbs)
Net weight
kg (lbs)
230(508)
Heat exchanger
Salt-resistant cross fin & copper tube
Optional parts
Header: CMY-Y104/108/1010-G
PUHY-RP300YJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
33.5
28,800
114,300
8.98
15.1-14.4-13.8
3.73
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
37.5
32,300
128,000
9.42
15.9-15.1-14.5
3.98
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~26
57
59
60
12.7 (1/2) Brazed
28.58 (1-1/8) Brazed
Propeller fan x 1
185
3,083
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
6.8
0.045 (240V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without legs)
x 920 x 760
67-3/8 (65 without legs)
x 36-1/4 x 29-15/16
High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
Over-heat protection,
Over-current protection
Over-heat protection
Thermal switch
R410A x 9.0kg (20lbs)
255 (563)
Salt-resistant cross fin & copper tube
Header: CMY-Y104/108/1010-G
12.7 (1/2) Brazed
28.58 (1-1/8) Brazed
Propeller fan x 1
185
3,083
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
8.2
0.045 (240V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without legs)
x 920 x 760
67-3/8 (65 without legs)
x 36-1/4 x 29-15/16
High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
Over-heat protection,
Over-current protection
Over-heat protection
Thermal switch
R410A x 9.0kg (20lbs)
255 (563)
Salt-resistant cross fin & copper tube
Header: CMY-Y104/108/1010-G
15.88 (5/8) Brazed
34.93 (1-3/8) Brazed
Propeller fan x 1
185
3,083
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
9.9
0.045 (240V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710(1,650 without legs)
x 920 x 760
67-3/8 (65 without legs)
x 36-1/4 x 29-15/16
High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
Over-heat protection,
Over-current protection
Over-heat protection
Thermal switch
R410A x 9.0kg (20lbs)
255 (563)
Salt-resistant cross fin & copper tube
Header: CMY-Y104/108/1010-G
Model
Power source
Cooling capacity
(Nominal)
*1
kW
*1 kcal / h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 kcal / h
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
PUHY-RP400YSJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
45.0
38,700
153,500
11.87
20.0-19.0-18.3
3.79
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
50.0
43,000
170,600
11.38
19.2-18.2-17.5
4.39
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~32
PUHY-RP450YSJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
50.0
43,000
170,600
13.77
23.2-22.0-21.2
3.63
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
56.0
48,200
191,100
12.81
21.6-20.5-19.8
4.37
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~32
59
59.5
Refrigerant piping Liquid pipe
mm (in.)
15.88 (5/8) Brazed
15.88 (5/8) Brazed
diameter
Gas pipe
mm (in.)
34.93 (1-3/8) Brazed
34.93 (1-3/8) Brazed
Set Model
Model
PUHY-RP200YJM-B (-BS)
PUHY-RP200YJM-B (-BS)
PUHY-RP200YJM-B (-BS)
PUHY-RP250YJM-B (-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
3
Air flow rate
185
185
185
185
m /min
L/s
3,083
3,083
3,083
3,083
cfm
6,532
6,532
6,532
6,532
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
*3
External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Inverter
Motor output
kW
4.8
4.8
4.8
6.8
Case heater
kW
0.035 (240V)
0.035 (240V)
0.035 (240V)
0.045 (240V)
External finish
Pre-coated galvanized steel sheets (+powder coating for -BS type) Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
1,710 (1,650 without legs)
1,710 (1,650 without legs)
1,710 (1,650 without legs)
1,710 (1,650 without legs)
mm
x 920 x 760
x 920 x 760
x 920 x 760
x 920 x 760
67-3/8 (65 without legs)
67-3/8 (65 without legs)
67-3/8 (65 without legs)
67-3/8 (65 without legs)
in.
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15,3.3MPa (601,479 psi) High pressure sensor, High pressure switch at 4.15,3.3MPa (601,479 psi)
devices
Inverter circuit (COMP./ FAN)
Over-heat protection, Over-current protection
Over-heat protection, Over-current protection
Compressor
Over-heat protection
Over-heat protection
Fan motor
Thermal switch
Thermal switch
Thermal switch
Thermal switch
Refrigerant
Type x original charge
R410A x 6.5kg (15lbs)
R410A x 6.5kg (15lbs)
R410A x 6.5kg (15lbs)
R410A x 9.0kg (20lbs)
Net weight
kg (lbs)
230 (508)
230 (508)
230 (508)
255 (563)
Heat exchanger
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.)
9.52 (3/8) Brazed
9.52 (3/8) Brazed
9.52 (3/8) Brazed
9.52 (3/8) Brazed
and distributor
Gas pipe
mm (in.)
19.05 (3/4) Brazed
19.05 (3/4) Brazed
19.05 (3/4) Brazed
22.2 (7/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-RP100VBK
Outdoor Twinning kit: CMY-RP100VBK
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
Notes:
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27°CDB/19°CWB
(81°FDB/66°FWB)
35°CDB (95°FDB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27°CDB/19°CWB
(81°FDB/66°FWB)
35°CDB (95°FDB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20°CDB(68°FDB)
7°CDB/6°CWB (45°FDB/43°FWB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20°CDB(68°FDB)
7°CDB/6°CWB (45°FDB/43°FWB)
7.5m (24-9/16ft.)
0m (0ft.)
*3. External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specifications may be subject to change without notice.
*Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Outdoor unit
Page 85
PUHY-RP350YJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
40.0
34,400
136,500
11.79
19.9-18.9-18.2
3.39
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
45.0
38,700
153,500
12.60
21.2-20.2-19.4
3.57
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~30
*3. External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specifications may be subject to change without notice.
*Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Outdoor unit
Page 86
OUTDOOR UNIT
Y Series
PUHY-RP YSJM-B(-BS)
OUTDOOR UNIT
Y Series
PUHY-RP YSJM-B(-BS)
Specifications
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1
kW
*1 kcal / h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 kcal / h
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
PUHY-RP500YSJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
56.0
48,200
191,100
15.68
26.4-25.1-24.2
3.57
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
63.0
54,200
215,000
14.44
24.3-23.1-22.3
4.36
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~32
PUHY-RP550YSJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
63.0
54,200
215,000
17.50
29.5-28.0-27.0
3.60
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
69.0
59,300
235,400
16.62
28.0-26.6-25.6
4.15
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~32
60
61
Refrigerant piping Liquid pipe
mm (in.)
15.88 (5/8) Brazed
15.88 (5/8) Brazed
diameter
Gas pipe
mm (in.)
34.93 (1-3/8) Brazed
34.93 (1-3/8) Brazed
Set Model
Model
PUHY-RP250YJM-B (-BS)
PUHY-RP250YJM-B (-BS)
PUHY-RP250YJM-B (-BS)
PUHY-RP300YJM-B (-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
3
Air flow rate
185
185
185
185
m /min
L/s
3,083
3,083
3,083
3,083
cfm
6,532
6,532
6,532
6,532
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
*3 External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Inverter
Motor output
kW
6.8
6.8
6.8
8.2
Case heater
kW
0.045 (240V)
0.045 (240V)
0.045 (240V)
0.045 (240V)
External finish
Pre-coated galvanized steel sheets (+powder coating for -BS type) Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
1,710 (1,650 without legs)
1,710 (1,650 without legs)
1,710 (1,650 without legs)
1,710 (1,650 without legs)
mm
x 920 x 760
x 920 x 760
x 920 x 760
x 920 x 760
67-3/8 (65 without legs)
67-3/8 (65 without legs)
67-3/8 (65 without legs)
67-3/8 (65 without legs)
in.
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15,3.3MPa (601,479 psi) High pressure sensor, High pressure switch at 4.15,3.3MPa (601,479 psi)
devices
Inverter circuit (COMP./ FAN)
Over-heat protection, Over-current protection
Over-heat protection, Over-current protection
Compressor
Over-heat protection
Over-heat protection
Fan motor
Thermal switch
Thermal switch
Thermal switch
Thermal switch
Refrigerant
Type x original charge
R410A x 9.0kg (20lbs)
R410A x 9.0kg (20lbs)
R410A x 9.0kg (20lbs)
R410A x 9.0kg (20lbs)
Net weight
kg (lbs)
255 (563)
255 (563)
255 (563)
255 (563)
Heat exchanger
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.)
9.52 (3/8) Brazed
9.52 (3/8) Brazed
9.52 (3/8) Brazed
12.7 (1/2) Brazed
and distributor
Gas pipe
mm (in.)
22.2 (7/8) Brazed
22.2 (7/8) Brazed
22.2 (7/8) Brazed
22.2 (7/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-RP100VBK
Outdoor Twinning kit: CMY-RP100VBK
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
Notes:
*1
kW
*1 kcal / h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 kcal / h
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
PUHY-RP600YSJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
69.0
59,300
235,400
18.59
31.3-29.8-28.7
3.71
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
76.5
65,800
261,000
19.22
32.4-30.8-29.7
3.98
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~32
PUHY-RP650YSJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
73.0
62,800
249,100
21.09
35.6-33.8-32.6
3.46
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
81.5
70,100
278,100
21.73
36.6-34.8-33.5
3.75
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~32
62
62.5
Refrigerant piping Liquid pipe
mm (in.)
19.05 (3/4) Brazed
19.05 (3/4) Brazed
diameter
Gas pipe
mm (in.)
34.93 (1-3/8) Brazed
41.28 (1-5/8) Brazed
Set Model
Model
PUHY-RP300YJM-B (-BS)
PUHY-RP300YJM-B (-BS)
PUHY-RP300YJM-B (-BS)
PUHY-RP350YJM-B (-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
3
Air flow rate
185
185
185
185
m /min
L/s
3,083
3,083
3,083
3,083
cfm
6,532
6,532
6,532
6,532
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
0.92 x 1
0.92 x 1
*3
External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Inverter
Motor output
kW
8.2
8.2
8.2
9.9
Case heater
kW
0.045 (240V)
0.045 (240V)
0.045 (240V)
0.045 (240V)
External finish
Pre-coated galvanized steel sheets (+powder coating for -BS type) Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
1,710 (1,650 without legs)
1,710 (1,650 without legs)
1,710 (1,650 without legs)
1,710 (1,650 without legs)
mm
x 920 x 760
x 920 x 760
x 920 x 760
x 920 x 760
67-3/8 (65 without legs)
67-3/8 (65 without legs)
67-3/8 (65 without legs)
67-3/8 (65 without legs)
in.
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15,3.3MPa (601,479 psi) High pressure sensor, High pressure switch at 4.15,3.3MPa (601,479 psi)
devices
Inverter circuit (COMP./ FAN)
Over-heat protection, Over-current protection
Over-heat protection, Over-current protection
Compressor
Over-heat protection
Over-heat protection
Fan motor
Thermal switch
Thermal switch
Thermal switch
Thermal switch
Refrigerant
Type x original charge
R410A x 9.0kg (20lbs)
R410A x 9.0kg (20lbs)
R410A x 9.0kg (20lbs)
R410A x 9.0kg (20lbs)
Net weight
kg (lbs)
255 (563)
255 (563)
255 (563)
255 (563)
Heat exchanger
Salt-resistant cross fin & copper tube
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.)
12.7 (1/2) Brazed
12.7 (1/2) Brazed
12.7 (1/2) Brazed
12.7 (1/2) Brazed
and distributor
Gas pipe
mm (in.)
22.2 (7/8) Brazed
22.2 (7/8) Brazed
22.2 (7/8) Brazed
28.58 (1-1/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-RP100VBK
Outdoor Twinning kit: CMY-RP100VBK
Header: CMY-Y104/108/1010-G
Header: CMY-Y104/108/1010-G
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27°CDB/19°CWB
(81°FDB/66°FWB)
35°CDB (95°FDB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27°CDB/19°CWB
(81°FDB/66°FWB)
35°CDB (95°FDB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20°CDB(68°FDB)
7°CDB/6°CWB (45°FDB/43°FWB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20°CDB(68°FDB)
7°CDB/6°CWB (45°FDB/43°FWB)
7.5m (24-9/16ft.)
0m (0ft.)
*3. External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specifications may be subject to change without notice.
*Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Outdoor unit
Page 87
Model
Power source
Cooling capacity
(Nominal)
*3. External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specifications may be subject to change without notice.
*Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Outdoor unit
Page 88
OUTDOOR UNIT
Y Series
PUHY-RP YSJM-B(-BS)
OUTDOOR UNIT
Y Series
PUHY-RP YSJM-B(-BS)
Specifications
Specifications
Model
Power source
Cooling capacity
(Nominal)
PUHY-RP700YSJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
80.0
68,800
273,000
22.22
37.5-35.6-34.3
3.60
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
88.0
75,700
300,300
20.13
33.9-32.2-31.1
4.37
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~32
*1
kW
*1 kcal / h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 kcal / h
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
Refrigerant piping Liquid pipe
diameter
Gas pipe
Set Model
Model
FAN
Compressor
External finish
m3/min
L/s
cfm
Control, Driving mechanism
Motor output
kW
*3 External static press.
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External dimension HxWxD
mm
in.
Protection
devices
High pressure protection
Inverter circuit (COMP./ FAN)
Compressor
Fan motor
Type x original charge
kg (lbs)
Refrigerant
Net weight
Heat exchanger
Pipe between unit Liquid pipe
and distributor
Gas pipe
Optional parts
mm (in.)
mm (in.)
61.5
62
62.5
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
PUHYPUHYPUHYRP200YJM-B(-BS) RP250YJM-B(-BS) RP250YJM-B(-BS)
Propeller fan x 1 Propeller fan x 1 Propeller fan x 1
185
185
185
3,083
3,083
3,083
6,532
6,532
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O) 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
4.8
6.8
6.8
0.035 (240V) 0.045 (240V) 0.045 (240V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710 (1,650 without 1,710 (1,650 without 1,710 (1,650 without
legs) x 920 x 760
legs) x 920 x 760
legs) x 920 x 760
67-3/8 (65 without legs) 67-3/8 (65 without legs) 67-3/8 (65 without legs)
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
High pressure sensor, High pressure switch
at 4.15,3.3MPa (601,479 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch Thermal switch Thermal switch
R410A x 6.5kg (15lbs) R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
230 (508)
255 (563)
255 (563)
Salt-resistant cross fin & copper tube
9.52 (3/8) Brazed 9.52 (3/8) Brazed 9.52 (3/8) Brazed
19.05 (3/4) Brazed 22.2 (7/8) Brazed 22.2 (7/8) Brazed
Outdoor Twinning kit: CMY-RP200VBK
Header: CMY-Y104/108/1010-G
PUHYPUHYPUHYRP250YJM-B(-BS) RP250YJM-B(-BS) RP250YJM-B(-BS)
Propeller fan x 1 Propeller fan x 1 Propeller fan x 1
185
185
185
3,083
3,083
3,083
6,532
6,532
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O) 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
6.8
6.8
6.8
0.045 (240V) 0.045 (240V) 0.045 (240V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710 (1,650 without 1,710 (1,650 without 1,710 (1,650 without
legs) x 920 x 760
legs) x 920 x 760
legs) x 920 x 760
67-3/8 (65 without legs) 67-3/8 (65 without legs) 67-3/8 (65 without legs)
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
High pressure sensor, High pressure switch
at 4.15,3.3MPa (601,479 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch Thermal switch Thermal switch
R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
255 (563)
255 (563)
255 (563)
Salt-resistant cross fin & copper tube
9.52 (3/8) Brazed 9.52 (3/8) Brazed 9.52 (3/8) Brazed
22.2 (7/8) Brazed 22.2 (7/8) Brazed 22.2 (7/8) Brazed
Outdoor Twinning kit: CMY-RP200VBK
Header: CMY-Y104/108/1010-G
PUHYPUHYPUHYRP250YJM-B(-BS) RP250YJM-B(-BS) RP300YJM-B(-BS)
Propeller fan x 1 Propeller fan x 1 Propeller fan x 1
185
185
185
3,083
3,083
3,083
6,532
6,532
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O) 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
6.8
6.8
8.2
0.045 (240V) 0.045 (240V) 0.045 (240V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710 (1,650 without 1,710 (1,650 without 1,710 (1,650 without
legs) x 920 x 760
legs) x 920 x 760
legs) x 920 x 760
67-3/8 (65 without legs) 67-3/8 (65 without legs) 67-3/8 (65 without legs)
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
High pressure sensor, High pressure switch
at 4.15,3.3MPa (601,479 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch Thermal switch Thermal switch
R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
255 (563)
255 (563)
255 (563)
Salt-resistant cross fin & copper tube
9.52 (3/8) Brazed 9.52 (3/8) Brazed 12.7 (1/2) Brazed
22.2 (7/8) Brazed 22.2 (7/8) Brazed 22.2 (7/8) Brazed
Outdoor Twinning kit: CMY-RP200VBK
Header: CMY-Y104/108/1010-G
Notes:
Model
Power source
Cooling capacity
(Nominal)
*1
kW
*1 kcal / h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 kcal / h
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
PUHY-RP850YSJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
96.0
82,600
327,600
27.11
45.7-43.4-41.9
3.54
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
108.0
92,900
368,500
26.47
44.6-42.4-40.9
4.08
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~32
PUHY-RP900YSJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
101.0
86,900
344,600
28.29
47.7-45.3-43.7
3.57
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
113.0
97,200
385,600
28.39
47.9-45.5-43.8
3.98
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~32
63.5
64
Refrigerant piping Liquid pipe
mm (in.)
19.05 (3/4) Brazed
diameter
Gas pipe
mm (in.)
41.28 (1-5/8) Brazed
Set Model
Model
PUHY-RP250YJM-B(-BS) PUHY-RP300YJM-B(-BS) PUHY-RP300YJM-B(-BS)
FAN
Type x Quantity
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
3
Air flow rate
185
185
185
m /min
L/s
3,083
3,083
3,083
cfm
6,532
6,532
6,532
Control, Driving mechanism
Inverter-control, Direct-driven by motor
Motor output
kW
0.92 x 1
0.92 x 1
0.92 x 1
*3
External static press.
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Compressor
Type x Quantity
Inverter scroll hermetic compressor
Starting method
Inverter
Inverter
Inverter
Motor output
6.8
kW
8.2
8.2
Case heater
0.045 (240V)
kW
0.045 (240V)
0.045 (240V)
External finish
Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD
1,710 (1,650 without 1,710 (1,650 without 1,710 (1,650 without
mm
legs) x 920 x 760
legs) x 920 x 760
legs) x 920 x 760
67-3/8 (65 without legs) 67-3/8 (65 without legs) 67-3/8 (65 without legs)
in.
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
Protection
High pressure protection High pressure sensor, High pressure switch at 4.15,3.3MPa (601,479 psi)
devices
Inverter circuit (COMP./ FAN)
Over-heat protection, Over-current protection
Compressor
Over-heat protection
Fan motor
Thermal switch
Thermal switch
Thermal switch
Refrigerant
Type x original charge
R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
Net weight
kg (lbs)
255 (563)
255 (563)
255 (563)
Heat exchanger
Salt-resistant cross fin & copper tube
Pipe between unit Liquid pipe
mm (in.) 9.52 (3/8) Brazed
12.7 (1/2) Brazed
12.7 (1/2) Brazed
and distributor
Gas pipe
mm (in.) 22.2 (7/8) Brazed
22.2 (7/8) Brazed
22.2 (7/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-RP200VBK
Header: CMY-Y104/108/1010-G
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
PUHY-RP300YJM-B(-BS) PUHY-RP300YJM-B(-BS) PUHY-RP300YJM-B(-BS)
Propeller fan x 1
Propeller fan x 1
Propeller fan x 1
185
185
185
3,083
3,083
3,083
6,532
6,532
6,532
Inverter-control, Direct-driven by motor
0.92 x 1
0.92 x 1
0.92 x 1
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
Inverter
Inverter
8.2
8.2
8.2
0.045 (240V)
0.045 (240V)
0.045 (240V)
Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar>
1,710 (1,650 without 1,710 (1,650 without 1,710 (1,650 without
legs) x 920 x 760
legs) x 920 x 760
legs) x 920 x 760
67-3/8 (65 without legs) 67-3/8 (65 without legs) 67-3/8 (65 without legs)
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
x 36-1/4 x 29-15/16
High pressure sensor, High pressure switch at 4.15,3.3MPa (601,479 psi)
Over-heat protection, Over-current protection
Over-heat protection
Thermal switch
Thermal switch
Thermal switch
R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
255 (563)
255 (563)
255 (563)
Salt-resistant cross fin & copper tube
12.7 (1/2) Brazed
12.7 (1/2) Brazed
12.7 (1/2) Brazed
22.2 (7/8) Brazed
22.2 (7/8) Brazed
28.58 (7/8) Brazed
Outdoor Twinning kit: CMY-RP200VBK
Header: CMY-Y104/108/1010-G
Notes:
*1,*2 Nominal conditions
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Indoor
Outdoor
Pipe length
Level difference
Cooling
27°CDB/19°CWB
(81°FDB/66°FWB)
35°CDB (95°FDB)
7.5m (24-9/16ft.)
0m (0ft.)
Cooling
27°CDB/19°CWB
(81°FDB/66°FWB)
35°CDB (95°FDB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20°CDB(68°FDB)
7°CDB/6°CWB (45°FDB/43°FWB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20°CDB(68°FDB)
7°CDB/6°CWB (45°FDB/43°FWB)
7.5m (24-9/16ft.)
0m (0ft.)
*3. External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specifications may be subject to change without notice.
*Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Outdoor unit
Page 89
PUHY-RP800YSJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
90.0
77,400
307,100
25.49
43.0-40.8-39.4
3.53
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
100.0
86,100
341,200
23.75
40.0-38.0-36.7
4.21
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~32
19.05 (3/4) Brazed
41.28 (1-5/8) Brazed
mm (in.)
mm (in.)
Type x Quantity
Air flow rate
PUHY-RP750YSJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
85.0
73,100
290,000
24.14
40.7-38.7-37.3
3.52
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
95.0
81,700
324,100
21.78
36.7-34.9-33.6
4.36
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~130 % of outdoor unit capacity
P15~P250 / 1~32
*3. External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specifications may be subject to change without notice.
*Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Outdoor unit
Page 90
OUTDOOR UNIT
R2 Series
PURY-RP YJM-B(-BS)
Specifications
Model
Power source
Cooling capacity
(Nominal)
*1
kW
*1 kcal / h
*1 BTU / h
Power input
kW
Current input
A
EER
kW / kW
Temp. range of
Indoor
W.B.
cooling
Outdoor
D.B.
Heating capacity
*2
kW
(Nominal)
*2 kcal / h
*2 BTU / h
Power input
kW
Current input
A
COP
kW / kW
Temp. range of
Indoor
D.B.
heating
Outdoor
W.B.
Indoor unit
Total capacity
connectable
Model / Quantity
Sound pressure level
dB <A>
(measured in anechoic room)
PURY-RP200YJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
22.4
19,300
76,400
4.95
8.3-7.9-7.6
4.52
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
25.0
21,500
85,300
5.50
9.2-8.8-8.5
4.54
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~20
PURY-RP250YJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
28.0
24,100
95,500
6.82
11.5-10.9-10.5
4.10
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
31.5
27,100
107,500
7.22
12.1-11.5-11.1
4.36
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~25
56
Refrigerant piping High pressure
mm (in.)
diameter
Low pressure
mm (in.)
FAN
Type x Quantity
Air flow rate
m3/min
L/s
cfm
Control, Driving mechanism
Motor output
kW
*3 External static press.
Compressor
Type x Quantity
Starting method
Motor output
kW
Case heater
kW
External finish
19.05 (3/4) Brazed
28.58 (1-1/8) Brazed
Propeller fan x 1
225
3,750
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
5.4
0.035 (240V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1>
External dimension HxWxD
mm
1,710(1,650 without legs) x 1,220 x 760
in.
67-3/8 (65 without legs) x 48-1/16 x 29-15/16
Protection
High pressure protection High pressure sensor, High pressure switch
devices
at 4.15, 3.6MPa (601,522 psi)
Inverter circuit (COMP./ FAN) Over-heat protection, Over-current protection
Compressor
Discharge thermo protection, Over-current protection
Fan motor
Thermal switch
Refrigerant
Type x original charge
R410A x 11.8kg (27lbs)
Net weight
kg (lbs)
275 (607)
Heat exchanger
Salt-resistant cross fin & copper tube
Optional parts
BC controller: CMB-P104,105,106,108,1010,1013,1016V-G
Main BC controller: CMB-P108,1010,1013,1016V-GA
Sub BC controller: CMB-P104,108V-GB
57
59
19.05 (3/4) Brazed
28.58 (1-1/8) Brazed
Propeller fan x 1
225
3,750
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
6.8
0.045 (240V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1>
1,710(1,650 without legs) x 1,220 x 760
67-3/8 (65 without legs) x 48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15, 3.6MPa (601,522 psi)
Over-heat protection, Over-current protection
Discharge thermo protection, Over-current protection
Thermal switch
R410A x 11.8kg (27lbs)
290 (640)
Salt-resistant cross fin & copper tube
BC controller: CMB-P104,105,106,108,1010,1013,1016V-G
Main BC controller: CMB-P108,1010,1013,1016V-GA
Sub BC controller: CMB-P104,108V-GB
19.05 (3/4) Brazed
28.58 (1-1/8) Brazed
Propeller fan x 1
225
3,750
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH2O)
Inverter scroll hermetic compressor
Inverter
7.8
0.045 (240V)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1>
1,710(1,650 without legs) x 1,220 x 760
67-3/8 (65 without legs) x 48-1/16 x 29-15/16
High pressure sensor, High pressure switch
at 4.15, 3.6MPa (601,522 psi)
Over-heat protection, Over-current protection
Discharge thermo protection, Over-current protection
Thermal switch
R410A x 11.8kg (27lbs)
290 (640)
Salt-resistant cross fin & copper tube
BC controller: CMB-P104,105,106,108,1010,1013,1016V-G
Main BC controller: CMB-P108,1010,1013,1016V-GA
Sub BC controller: CMB-P104,108V-GB
Notes:
*1,*2 Nominal conditions
Indoor
Outdoor
Pipe length
Level difference
Cooling
27°CDB/19°CWB
(81°FDB/66°FWB)
35°CDB (95°FDB)
7.5m (24-9/16ft.)
0m (0ft.)
Heating
20°CDB(68°FDB)
7°CDB/6°CWB (45°FDB/43°FWB)
7.5m (24-9/16ft.)
0m (0ft.)
*3. External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2O).
*Nominal condition *1,*2 are subject to JIS B8615-1.
*Due to continuing improvement, above specifications may be subject to change without notice.
*Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Outdoor unit
Page 91
PURY-RP300YJM-B (-BS)
3-phase 4-wire 380-400-415V 50/60Hz
33.5
28,800
114,300
8.35
14.0-13.3-12.9
4.01
15.0~24.0°C (59~75°F)
-5.0~43.0°C (23~109°F)
37.5
32,300
128,000
8.70
14.6-13.9-13.4
4.31
15.0~27.0°C (59~81°F)
-20.0~15.5°C (-4~60°F)
50~150 % of outdoor unit capacity
P15~P250 / 1~30
I ndoor unit
Ceiling cassette type 4-way airflow
Ceiling cassette type 2-way airflow
Ceiling cassette type 1-way airflow
Ceiling concealed type
Fresh Air Intake type
Ceiling suspended type
Wall mounted type
Floor standing exposed
Floor mounted concealed type
OA Processing Units
Indoor unit
Page 92
Wide Selection of Indoor Units
Type
Model name
Model
P15
P20
P
P25
P32
P40
P50
P63
P71
P80
P100
P125
P140
P200
P250
PLFY-P VBM-E
4-way air flow
Page95 - Page96
PLFY-P VCM-E2
Page95 - Page96
Ceiling Cassette
2-way air flow
PLFY-P VLMD-E
Page97 - Page98
1-way air flow
PMFY-P VBM-E
Page99 - Page100
PEFY-P VMR-E-L/R
Page101 - Page102
PEFY-P VMS1(L)-E
Page103 - Page104
PEFY-P VMA(L)-E
Ceiling Concealed
PEFY-P VMA2-E
(Cooling only)
Page105 - Page106
PEFY-P VMH(S)-E
Page107 - Page108
Fresh Air Intake PEFY-P VMH-E-F
Page109 - Page110
Ceiling Suspended
PCFY-P VKM-E
Page111 - Page112
PKFY-P VBM-E
Page113 - Page114
Wall Mounted
PKFY-P VHM-E
Page113 - Page114
PKFY-P VKM-E
Page113 - Page114
PFFY-P VKM-E2
Page115 - Page116
Floor Standing/
Floor Mounted Concealed
PFFY-P VLEM-E
Page117 - Page118
PFFY-P VLRM-E
PFFY-P VLRMM-E
Page119 - Page120
Page 93
Page 94
INDOOR UNIT
Ceiling cassette type
4-way airflow
PLFY-P VBM-E
PLFY-P VCM-E2
Specifications
Power source
*1
*1
Cooling capacity
*4
*1
Heating capacity
*1
Cooling
Power
Heating
consumption
Cooling
Current
Heating
Cooling capacity
PLFY-P VBM
PLFY-P VCM
The new 4-way cassette VBM offers 72 different airflow patterns, making
it ideal for applications with ceilings up to 4.2 m (13-13/16ft) in height.
Compact body to match with 2 feets
(600mm) x 2 feets (600mm) ceiling
design (VCM)
External finish
(Munsell No.)
Dimension
HxWxD
Net weight
Unit
Panel
Unit
Panel
Unit
Panel
kW
BTU/h
kW
kW
BTU/h
kW
kW
A
A
mm(in.)
mm(in.)
kg(lbs.)
kg(lbs.)
Heat exchanger
Type x Quantity
570mm
570mm
Fan
Motor
Airflow rate *2
(Lo-Mid1-Mid2-Hi)
External static pressure
Type
Output
m3/min
L/s
cfm
Pa
PLFY-P32VBM-E PLFY-P40VBM-E PLFY-P50VBM-E PLFY-P63VBM-E PLFY-P80VBM-E PLFY-P100VBM-E PLFY-P125VBM-E
1-phase 220-240V 50Hz / 1-phase 220V 60Hz
3.6
9.0
4.5
5.6
7.1
11.2
14.0
12,300
30,700
15,400
19,100
24,200
38,200
47,800
3.7
9.2
4.6
5.7
7.2
11.4
14.2
4.0
10.0
5.0
6.3
8.0
12.5
16.0
13,600
34,100
17,100
21,500
27,300
42,700
54,600
0.04
0.03
0.07
0.05
0.15
0.16
0.03
0.02
0.06
0.04
0.14
0.15
0.29
0.22
0.51
0.36
1.00
1.07
0.22
0.14
0.43
0.29
0.94
1.00
Galvanized steel sheet
White (6.4Y 8.9/0.4)
298 x 840 x 840 (11-3/4 x 33-1/8 x 33-1/8)
258 x 840 x 840 (10-3/16 x 33-8/1 x 33-8/1)
35 x 950 x 950 (1-3/8 x 37-7/16 x 37-7/16)
27 (60)
22 (49)
23 (51)
6 (13)
Cross fin (Aluminum plate fin and copper tube)
Turbo fan x 1
14-15-16-18
11-12-13-14
12-13-14-16
183-200-217-233
388-424-459-494
200-217-233-267
424-459-494-565
0.050
kW
Air filter
Refrigerant
pipe diameter
Automatic Air Speed Adjustment
Auto-fan-speed mode enables speedy and
comfortable heating during heating startup.
The Auto-fan-speed mode is added to the
usual four steps “Low, Mid1, Mid2, High.”
The Auto-fan-speed mode enables speedy
and comfortable air conditioning because the
air flow speeds up when starting, and air flow
slows down when the air conditioning
becomes stable. (PLFY-P VBM-E ONLY)
Controls the four fan speed modes automatically
Low
Mid1
Mid2
High
Auto
* When using a wireless remote controller, initial settings are
required.
Draft-less Air Distribution
The horizontal blow mode* newly employed
supplies airflow horizontally not bringing
cooled/warmed air directly to occupants thus
preventing discomfort sensation due to
excessive cooling or direct exposing of
occupants to the air blow.
(PLFY-P VBM-E ONLY)
Wide Air Flow
(PLFY-P VBM-E ONLY)
Cooling softly with Wide Air Flow
Discharge air reaches wider area and the fan
speed is decreased by 20% thanks to the new
wide shape air outlet.
Conventional model
New model
“i-see sensor” can be used with
ceiling cassette type 4-way airflow
unit. (Option PAC-SA1ME-E, PLFYVBM-E ONLY)
New 4-way Cassette PLFY-VBM controls the
temperature difference at the top and bottom in
a room by checking the floor temperature with
“i-see sensor”. Comfortable air conditioning can
be realized smoothly with “sensible temperature
control.” (Option PAC-SA1ME-E, PLFY-VBM-E
ONLY)
Prevents overcooling/overheating, and
improves comfort/energy-efficiency
First in the industry
72 patterns of airflow to accommodate*On the commercial air
conditioners (According to the
any room layout are available.
survey by Mitsubishi Electric)
The number of outlet can be set to 4, 3, or 2. Flexible airflow is
available by fixing the up-down airflow direction of the outlet
with a wired remote controller (or manually).
72 airflow patterns
4-, 3-, or 2- way outlet selection*
Without i-see sensor: preset temperature at 23°C
37°C
In heating
25°C
13°C
The area that the ceiling
cassette without
“i-see sensor” can monitor.
*1
*1
Cooling capacity
Heating capacity
Power
consumption
Current
External finish
(Munsell No.)
Dimension
HxWxD
Net weight
*4
*1
*1
Cooling
Heating
Cooling
Heating
Unit
Panel
Unit
Panel
Unit
Panel
kW
BTU/h
kW
kW
BTU/h
kW
kW
A
A
With i-see sensor+Auto fan speed: preset temperature at 20°C
37°C
In heating
27-28-29-31
27-28-30-31
Fan
Type
Output
28-29-30-32
30-32-35-37
34-37-39-41
35-38-41-43
PLFY-P15VCM-E2
PLFY-P20VCM-E2
PLFY-P40VCM-E2
1.7
5,800
1.7
1.9
6,500
0.04
0.04
0.19
0.19
2.2
7,500
2.2
2.5
8,500
0.05
0.05
0.23
0.23
4.5
15,400
4.6
5.0
17,100
0.06
0.06
0.28
0.28
mm(in.)
mm(in.)
kg(lbs.)
kg(lbs.)
PLFY-P25VCM-E2
PLFY-P32VCM-E2
1-phase 220-240V 50Hz
3.6
2.8
12,300
9,600
3.7
2.8
4.0
3,2
13,600
10,900
0.05
0.06
0.05
0.06
0.23
0.28
0.23
0.28
Galvanized steel sheet with gray heat insulation
White (6.4Y 8.9/0.4)
208 x 570 x 570 (8-1/4 x 22-1/2 x 22-1/2)
20 x 650 x 650 (13/16 x 25-5/8 x 25-5/8)
15.5 (35)
3 (7)
17 (38)
3 (7)
Cross fin (Aluminum fin and copper tube)
Turbo fan x 1
Type x Quantity
Airflow rate * 2
(Lo-Mid-Hi)
ø9.52 (ø3/8)
O.D. 32 (1-1/4)
mm(in.)
dB(A)
ø15.88 (ø5/8) / ø19.05 (ø3/4)
(Compatible)
ø15.88(ø5/8)
m3/min
8-8.5-9
8-9-10
8-9-10
8-9-11
8-9-11
L/s
cfm
133-142-150
283-300-353
133-150-167
283-318-353
133-150-167
283-318-353
133-150-183
283-318-388
133-150-183
283-318-388
Pa
kW
Gas(Flare) mm(in.)
Liquid(Flare) mm(in.)
Field drain pipe diameter mm(in.)
Sound pressure level
dB(A)
(Lo-Mid-Hi)
*2 *3
0
0.008
Refrigerant
pipe diameter
28-30-31
1-phase induction motor
0.011
0.015
0.02
PP Honeycomb fabric (long life type)
ø12.7 (ø1/2)
ø6.35 (ø1/4)
O.D. 32 (1-1/4) (PVC pipe VP-25 connectable)
28-31-35
29-31-37
29-33-38
0.02
30-34-39
13°C
Setting the air direction for each
outlet with wired remote controller
Horizontal blow
Remote controller setting Down blow
Page 95
ø6.35 (ø1/4) / ø9.52 (ø3/8)
(Compatible)
Air filter
Fixed
Indoor unit
ø6.35 (ø1/4)
External static
pressure
25°C
*Default
*The ceiling may be smudged at a spot where the supplied
airflow is seriously disturbed.
Liquid
(Flare) mm(in.)
Cooling capacity
Motor
* Optional parts air outlet shutter plate (PLFY-P VBM-E
ONLY) is required for 2 or 3 way outlet selection.
Draft-less air distribution
can be performed
by horizontal blow.
ø12.7 (ø1/2) / ø15.88 (ø5/8)
(Compatible)
Power source
Suction temperature sensor
Preset temperature is
tended to be higher
than we need,
because heated air
rises to the ceiling.
ø12.7 (ø1/2)
Field drain pipe diameter
Sound pressure level
(Lo-Mid1-Mid2-Hi) *2 *3
Heat exchanger
Feeling temperature
at 20°C (Bottom17°C)
Gas
(Flare) mm(in.)
22-25-28-30
21-24-27-29
16-18-20-22
233-250-267-300 267-300-333-367 350-400-450-483 367-417-467-500
494-530-565-636 565-636-706-777 742-848-953-1024 777-883-989-1059
0
DC motor
0.120
PP Honeycomb
Suction temperature sensor
Feeling temperature
at 20°C (Bottom 20°C)
Auto-fan-speed mode of
4-way Cassette with
“i-see sensor” heats the
floor well and decreases
the temperature
difference at the top and
bottom in a room.
360°
2.7m
11.5m
The area that the ceiling
cassette with
“i-see sensor” can monitor.
Notes:
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27°C(81°F)DB/19°C(66°F)WB,Outdoor 35°C(95°F)DB
Heating : Indoor 20°C(68°F)DB,Outdoor 7°C(45°F)DB/6°C(43°F)WB
*2 Airflow rate/Sound pressure level are in (low-middle-high) or (low-middle1-middle2-high).
*3 It is measured in anechoic room at power source 230V.
*4 Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB, Outdoor 35°C(95°F)DB
Indoor unit
Page 96
INDOOR UNIT
Ceiling cassette type
2-way airflow
PLFY-P VLMD-E
Specifications
PLFY-P20VLMD-E
Power source
*1
kW
*1 BTU/h
Cooling capacity
kW
*4
kW
*1
Heating capacity
*1 BTU/h
Cooling
Power
kW
Heating
kW
consumption
Cooling
A
Current
Heating
A
External finish Unit
Panel
(Munsell No.)
mm (in.)
Unit
Dimension
Panel mm (in.)
HxWxD
kg(lbs.)
Unit
Net weight
kg(lbs.)
Panel
2.2
7,500
2.2
2.5
8,500
0.072 / 0.075
0.065 / 0.069
0.36 / 0.37
0.30 / 0.32
Cooling capacity
Slim body of 290mm(11-7/16in.) height
PLFY-P25VLMD-E
PLFY-P32VLMD-E
1-phase 220-240V 50Hz / 1-phase 220-230V 60Hz
3.6
2.8
12,300
9,600
3.7
2.8
4.0
3.2
13,600
10,900
0.072 / 0.075
0.072 / 0.075
0.065 / 0.069
0.065 / 0.069
0.36 / 0.37
0.36 / 0.37
0.30 / 0.32
0.30 / 0.32
Galvanized steel plate
Pure white (6.4Y 8.9/0.4)
290 x 776 x 634 (11-7/16 x 30-9/16 x 25)
20 x 1080 x 710 (13/16 x 42-9/16 x 28)
23 (51)
Slim body - only 290mm(11-7/16in.) height
The slimline body is highly suitable for installation in narrow
ceiling spaces and for replacing obsolete air-conditioning
equipment in older buildings. The main unit is only 290mm(117/16in.) height.
Equipped with drain pump
mechanism as standard
The drain can be positioned anywhere up to 583mm(22-15/16in.)
from the ceiling's surface, providing greater freedom with long
cross-piping and allowing more versatility with piping layouts.
290mm
.)
(11-7/16in
Drain height
max. 583(22-15/16)
Main unit height - 290(11-7/16)
Ceiling surface
583
Terminal block on outside of main unit
makes wiring easier
mm (in.)
Compact unit and low noise level attained!
Fresh air directly taken in
Sound pressure level table (Standard static pressure) at 0Pa
dB(A)
Capacity P20 P25 P32 P40 P50 P63 P80 P100 P125
Sound
High
33
36
37
39
39
42
46
pressure
Fan
Mid
30
33
34
37
36
39 42/44
Level
Speed
Low
27
29
31
32
33
36
40
<220V,240V>
dB(A)
Capacity
Sound
High
pressure
Fan
Mid
Level
Speed
Low
<230V>
Indoor unit
Page 97
Fresh air can be taken in to the main unit directly (optional
accessories needed.)
Airflow rate *2
(Lo-Mid-Hi)
Motor
External static pressure
Type
Output
24 (53)
7.0-8.5-10.5
117-142-175
247-300-371
6.5-8.0-9.5
108-133-158
230-283-335
m3/min
L/s
cfm
Pa
0
1-phase induction motor
0.015 (at 240V)
PP honeycomb fabric (long life type)
ø12.7 (ø1/2)
ø6.35 (ø1/4)
O.D.32 (1-1/4)
27-30-33
28-31-34
kW
Air filter
Gas(Flare) mm(in.)
Refrigerant
pipe diameter Liquid(Flare) mm(in.)
Field drain pipe diameter mm(in.)
Sound pressure level 220V,240V dB(A)
dB(A)
(Lo-Mid-Hi) *2 *3 230V
29-33-36
30-34-37
PLFY-P50VLMD-E
Power source
*1
*1
Cooling capacity
*4
*1
Heating capacity
*1
Cooling
Power
Heating
consumption
Cooling
Current
Heating
External finish Unit
(Munsell No.) Panel
Unit
Dimension
Panel
HxWxD
Unit
Net weight
Panel
Heat exchanger
Type x Quantity
Airflow rate *2
Fan
(P50~P100:Lo-Mid-Hi)
(P125:Lo-Mid2-Mid1-Hi)
External static pressure
Type
Motor
Output
Cooling capacity
kW
BTU/h
kW
kW
BTU/h
kW
kW
A
A
mm (in.)
mm (in.)
kg(lbs.)
kg(lbs.)
m3/min
L/s
cfm
Pa
kW
PLFY-P63VLMD-E
PLFY-P80VLMD-E
PLFY-P100VLMD-E
1-phase 220-240V 50Hz / 1-phase 220-230V 60Hz
7.1
9.0
11.2
5.6
24,200
30,700
38,200
19,100
7.2
9.2
11.4
5.7
8.0
10.0
12.5
6.3
27,300
34,100
42,700
21,500
0.101 / 0.105
0.147 / 0.156
0.157 / 0.186
0.082 / 0.086
0.094 / 0.099
0.140 / 0.150
0.150 / 0.180
0.075 / 0.080
0.49 / 0.51
0.72 / 0.74
0.75 / 0.88
0.41 / 0.43
0.43 / 0.46
0.66 / 0.69
0.69 / 0.83
0.35 / 0.38
Galvanized steel plate
Pure white (6.4Y 8.9 / 0.4)
290 x 946 x 634 (11-7/16 x 37-1/4 x 25)
290 x 1446 x 634 (11-7/16 x 56-15/16 x 25)
20 x 1250 x 710 (13/16 x 49-1/4 x 28)
20 x 1750 x 710 (13/16 x 68-15/16 x 28)
28 (62)
44 (98)
47 (104)
27 (60)
7.5 (17)
12.5 (28)
Cross fin
Turbo fan x 1
Turbo fan x 2
9.0-11.0-12.5
11.0-13.0-15.5
17.5-21.0-25.0
15.5-18.5-22.0
150-183-208
167-217-258
292-350-417
258-308-367
318-388-441
353-459-547
618-742-883
547-653-777
0
1-phase induction motor
0.030 (at 240V)
0.020 (at 240V)
0.020 (at 240V)
Air filter
PP honeycomb fabric (long life type)
Refrigerant
pipe diameter
Long life filter equipped as standard
4.5
15,400
4.6
5.0
17,100
0.081 / 0.085
0.074 / 0.079
0.40 / 0.42
0.34 / 0.37
6.5 (15)
Cross fin
Turbo fan x 1
Heat exchanger
Type x Quantity
Fan
PLFY-P40VLMD-E
Gas
(Flare)
mm(in.)
ø12.7 (ø1/2)
Liquid
(Flare)
mm(in.)
ø6.35 (ø1/4)
Field drain pipe diameter mm(in.)
Sound pressure level 220V,240V dB(A)
dB(A)
(Lo-Mid-Hi) *2 *3 230V
31-34-37
32-35-38
PLFY-P125VLMD-E
14.0
47,800
14.2
16.0
54,600
0.28 / 0.28
0.27 / 0.27
1.35 / 1.35
1.33 / 1.33
290 x 1708 x 606 (11-7/16 x 67-1/4 x 23-7/8)
20 x 2010 x 710 (13/16 x 79-3/16 x 28)
56 (124)
13.0 (29)
Sirocco fan x 4
24.0-27.0-30.0-33.0
400-450-500-550
848-953-1,059-1,165
0.078 x 2 (at 240V)
Synthetic fiber unwoven
cloth filter (long life)
ø15.88 (ø5/8)
ø9.52 (ø3/8)
32-37-39
33-38-40
O.D.32 (1-1/4)
33-36-39
34-37-40
36-39-42
37-41-43
40-42-44-46
(Lo-Mid2-Mid1-Hi)
The antibacterial long life filter does not require maintenance
for approximately a year.
P20 P25 P32 P40 P50 P63 P80 P100 P125
34
37
38
40
40
43
31
34
35
38
37
41 42/44
46
28
30
32
33
34
37
40
Notes:
Easy installation
Lighter panel and placing the electric board near the panel
make installation and maintenance easier. Also, the heat
exchanger is washable by displacing the center panel, filter,
and fan.
*1
Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27°C(81°F)DB/19°C(66°F)WB,Outdoor 35°C(95°F)DB
Heating : Indoor 20°C(68°F)DB,Outdoor 7°C(45°F)DB/6°C(43°F)WB
*2 Airflow rate/Sound pressure level are in (low-middle-high) or (low-middle2-middle1-high).
*3 It is measured in anechoic room.
*4 Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB, Outdoor 35°C(95°F)DB
Indoor unit
Page 98
INDOOR UNIT
Ceiling cassette type
1-way airflow
PMFY-P VBM-E
Specifications
PMFY-P20VBM-E
Power source
*1
kW
*1 BTU/h
Cooling capacity
*4
kW
*1
kW
Heating capacity
*1 BTU/h
Cooling
Power
kW
Heating
consumption
kW
Cooling
A
Current
Heating
A
External finish (Munsell No.)
Unit
Dimension
mm(in.)
Panel
HxWxD
mm(in.)
Unit
kg(lbs.)
Net weight
Panel
kg(lbs.)
Heat exchanger
Type
*2 m3/min
Airflow rate
Fan
L/s
(Lo-Mid2-Mid1-Hi)
cfm
External staticpressure
Pa
Type
Motor
Output
kW
Air filter
Refrigerant
Gas(Flare) mm(in.)
pipe diameter Liquid(Flare) mm(in.)
Field drain pipe diameter mm(in.)
Sound pressure level
dB(A)
(Lo-Mid2-Mid1-Hi) *2 *3
2.2
7,500
2.2
2.5
8,500
0.042
0.042
0.20
0.20
Cooling capacity
Compact and lightweight body perfect for
limited ceiling space applications.
Compact size for smooth
installation and maintenance
6.5-7.2-8.0-8.7
108-120-133-145
230-254-283-307
PMFY-P25VBM-E
PMFY-P32VBM-E
1-phase 220-240V 50Hz / 1-phase 220V 60Hz
2.8
3.6
9,600
12,300
2.8
3.7
3.2
4.0
10,900
13,600
0.044
0.044
0.21
0.21
White (0.98Y 8.99/0.63)
230 x 812 x 395 (9-1/16 x 32 x 15-9/16)
30 x 1000 x 470 (1-3/16 x 39-3/8 x 18-9/16)
14 (31)
3 (7)
Cross fin (Aluminum plate fin and copper tube)
Line flow fan x 1
7.3-8.0-8.6-9.3
122-133-143-155
258-283-304-328
0
1-phase induction motor
0.028
PP Honeycomb fabric
ø12.7 (ø1/2)
ø6.35 (ø1/4)
O.D. 26 (1)
PMFY-P40VBM-E
32-34-36-37
33-35-37-39
27-30-33-35
4.5
15,400
4.6
5.0
17,100
0.054
0.054
0.26
0.26
7.7-8.7-9.7-10.7
128-145-162-178
272-307-343-378
Drain pump
Unit body size has been standardized for all
models at 812mm for easier installation.
Body weight is only 14kg for the main unit
and 3kg for the panel, making this unit one
of the lightest in the industry.
The drain can be positioned anywhere up to 600mm(23-5/8in.) from the ceiling's surface.
max.
600
(23-5/8)
Quiet operation
Newly developed airflow control technology
reduces noise level to only 27dB (P20VBM)
for industry-leading quiet performance.
max.
402
(15-7/8)
230
(9-11/16)
PMFY-VBM
198
(7-13/16)
mm (in.)
Sound pressure level table
Capacity
P20 P25 P32 P40
35
37
39
33
36
37
Mid 2
30
34
35
Low
27
32
33
High
Sound
pressure Fan
Mid 1
level
Speed
<220V,240V>
Notes:
*1
Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27°C(81°F)DB/19°C(66°F)WB,Outdoor 35°C(95°F)DB
Heating : Indoor 20°C(68°F)DB,Outdoor 7°C(45°F)DB/6°C(43°F)WB
*2
Airflow rate/Sound pressure level are in (low-middle2-middle1-high).
*3
It is measured in anechoic room.
*4 Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB, Outdoor 35°C(95°F)DB
Indoor unit
Page 99
Indoor unit
Page 100
INDOOR UNIT
Ceiling concealed type
Specifications
PEFY-P20VMR-E-L
PEFY-P VMR-E-L/R
Static Pressure
5Pa
Width
640mm
25-6/32in.
Ultra
Low Noise
Power source
Cooling capacity
Cooling capacity
Piping connection
Heating capacity
L model
R model
Power
consumption
Problem solver for residential hotels, museums, libraries,
or hospitals where low noise is especially a must!
Key Card
Switch
Cooling
Heating
Cooling
Heating
Current
kW
BTU/h
kW
kW
BTU/h
kW
kW
A
A
2.2
7,500
2.2
2.5
8,500
0.06 / 0.06
0.06 / 0.06
0.29 / 0.29
0.29 / 0.29
External finish
Dimension Rear inlet mm (in.)
HxWxD
Bottom inlet mm (in.)
Net weight
kg(lbs.)
Heat exchanger
Type x Quantity
m3/min
Airflow rate
L/s
(Lo-Mid-Hi)
Fan
cfm
External static
Pa
*2
pressure
Type
Motor
Output
kW
Air filter
Refrigerant
mm(in.)
Gas
pipe diameter Liquid mm(in.)
Field drain pipe diameter mm(in.)
Sound pressure 220V
dB(A)
level (Lo-Mid-Hi) 230V
*3 240V
Inlet
Access
door
*1
*1
*4
*1
*1
Noise measurement point
Noise measurement point
It is possible to operate / stop by taking a key card in and out.
Quiet indoor environment can be achieved with 21dB around
the bed and 22dB around the desk.
*The noise level may differ by the room size or the setting of the
unit.
Enables to install for symmetric design room
Energy saving
Left or right piping and control boxes are available depending
on the layout of each room. Plus, as in the above figure, easy
maintenance is possible from the access door in the bathroom.
*Seen from the front, the pipe and control box are on the right
side for -R models.
Energy saving can be realized by preventing us from failing to
switch off of the air conditioners with a centralized system when no
one is in the room.
Note: Compact and simple controllers, designed specifically to
control only start/stop, fan speed and temperature can be set in
each room for the occupants' enhanced individual comfort.
Easy Maintenance
Drain pan and heat exchangers are washable from the access
door in the bathroom, making maintenance easy and cost
saving.
kW
*1
*1 BTU/h
kW
Cooling capacity
*4
kW
*1
Heating capacity
*1 BTU/h
Power
kW
Cooling
consumption
kW
Heating
A
Cooling
Current
A
Heating
External finish
Dimension Rear inlet mm (in.)
HxWxD
Bottom inlet mm (in.)
Net weight
kg(lbs.)
Heat exchanger
Type x Quantity
m3/min
Airflow rate
L/s
(Lo-Mid-Hi)
Fan
cfm
External static
Pa
pressure
*2
Type
Motor
Output
kW
Air filter
Refrigerant
mm(in.)
Gas
pipe diameter Liquid mm(in.)
Field drain pipe diameter mm(in.)
Sound pressure 220V
dB(A)
level (Lo-Mid-Hi) 230V
*3 240V
Cooling capacity
3.6
12,300
3.7
4.0
13,600
0.07 / 0.08
0.07 / 0.08
0.34 / 0.38
0.34 / 0.38
4.8-5.8-9.3
80-97-155
170-205-328
5
0.018
0.023
PP Honeycomb fabric (washable)
ø12.7 (ø1/2) Brazed
ø6.35 (ø1/4) Brazed
O.D. 26 (1)
20-25-33
21-26-35
22-27-33
20-25-30
21-26-32
22-27-30
PEFY-P20VMR-E-R
Ultra low noise
PEFY-P32VMR-E-L
1-phase induction motor
Power source
Operable by key card switch
PEFY-P25VMR-E-L
1-phase 220-230-240V 50Hz / 1-phase 220-230V 60Hz
2.8
9,600
2.8
3.2
10,900
0.06 / 0.06
0.06 / 0.06
0.29 / 0.29
0.29 / 0.29
Galvanized
292 x 640 x 580 (11-1/2 x 25-1/4 x 22-7/8)
300 x 640 x 570 (11-7/8 x 25-1/4 x 22-1/2)
18 (40)
Cross fin (Aluminum fin and copper tube)
Sirocco fan x 1
4.8-5.8-7.9
80-97-132
170-205-279
2.2
7,500
2.2
2.5
8,500
0.06 / 0.06
0.06 / 0.06
0.29 / 0.29
0.29 / 0.29
PEFY-P25VMR-E-R
1-phase 220-230-240V 50Hz / 1-phase 220-230V 60Hz
2.8
9,600
2.8
3.2
10,900
0.06 / 0.06
0.06 / 0.06
0.29 / 0.29
0.29 / 0.29
Galvanized
292 x 640 x 580 (11-1/2 x 25-1/4 x 22-7/8)
300 x 640 x 570 (11-7/8 x 25-1/4 x 22-1/2)
18 (40)
Cross fin (Aluminum fin and copper tube)
Sirocco fan x 1
4.8-5.8-7.9
80-97-132
170-205-279
PEFY-P32VMR-E-R
3.6
12,300
3.7
4.0
13,600
0.07 / 0.08
0.07 / 0.08
0.34 / 0.38
0.34 / 0.38
4.8-5.8-9.3
80-97-155
170-205-328
5
1-phase induction motor
0.018
0.023
PP Honeycomb fabric (washable)
ø12.7 (ø1/2) Brazed
ø6.35 (ø1/4) Brazed
O.D. 26(1)
20-25-30
21-26-32
22-27-30
20-25-33
21-26-35
22-27-33
Notes:
*1
Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27°C(81°F)DB/19°C(66°F)WB,Outdoor 35°C(95°F)DB
Heating : Indoor 20°C(68°F)DB,Outdoor 7°C(45°F)DB/6°C(43°F)WB
*2
The external static pressure is set to 5Pa (at 220V, 230V, 240V).
*3
Measured in anechoic room. Sound pressure levels of the unit with a rear air inlet. (Sound pressure levels are higher than the unit with a bottom air inlet.)
*4 Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB, Outdoor 35°C(95°F)DB
Indoor unit
Page 101
Indoor unit
Page 102
INDOOR UNIT
Ceiling concealed type
Specifications
PEFY-P VMS1(L)-E
Static Pressure
5~50Pa
Height
200mm
7-28/32in.
Low Noise
Power source
*1
*1
Cooling capacity
*4
*1
Heating capacity
*1
Power
*3 Cooling
consumption Heating
Cooling
Current *3
Heating
External finish
Dimension
HxWxD
Net weight
*3
Heat exchanger
Type x Quantity
Cooling capacity
Width
790mm
31-1/8in.
Width
Width
39in.
46-7/8in.
990mm 1,190mm
The ultra thin unit of 200mm offers increased flexibility, and is
particularly suitable for places where low noise operation is desired
from a slim line body.
Fan
Motor
Airflow rate
(Lo-Mid-Hi)
External static press
type
output
PEFY-P15VMS1(L)-E PEFY-P20VMS1(L)-E PEFY-P25VMS1(L)-E PEFY-P32VMS1(L)-E PEFY-P40VMS1(L)-E PEFY-P50VMS1(L)-E PEFY-P63VMS1(L)-E
1-phase 220-240V 50Hz / 1-phase 220-240V 60Hz
4.5
kW
3.6
7.1
5.6
2.8
1.7
2.2
15,400
BTU/h
12,300
24,200
19,100
9,600
5,800
7,500
4.6
kW
3.7
7.2
5.7
2.8
1.7
2.2
5.0
kW
4.0
8.0
6.3
3.2
1.9
2.5
17,100
BTU/h
13,600
27,300
21,500
10,900
6,500
8,500
0.07 [0.05]
kW
0.07 [0.05]
0.09 [0.07]
0.09 [0.07]
0.06 [0.04]
0.05 [0.03]
0.05 [0.03]
0.05 [0.05]
kW
0.05 [0.05]
0.07 [0.07]
0.07 [0.07]
0.04 [0.04]
0.03 [0.03]
0.03 [0.03]
0.56 [0.45]
A
0.50 [0.39]
0.72 [0.61]
0.67 [0.56]
0.50 [0.39]
0.42 [0.31]
0.47 [0.36]
0.45 [0.45]
A
0.39 [0.39]
0.61 [0.61]
0.56 [0.56]
0.39 [0.39]
0.31 [0.31]
0.36 [0.36]
Galvanized
200 x 790 x 700
200 x 990 x 700
200 x 1,190 x 700
mm
7-7/8 x 31-1/8 x 27-9/16
7-7/8 x 39 x 27-9/16
7-7/8 x 46-7/8 x 27-9/16
In.
24(53) [23(51)]
20(45) [19(42)]
19(42) [18(40)]
28(62) [27(60)]
kg(lbs.)
Cross fin (Aluminium fin and copper tube)
Sirocco fan x 3
Sirocco fan x 2
Sirocco fan x 4
8-9.5-11
6-8-10
9.5-11-13
5.5-7-9
5-6-7
5.5-6.5-8
12-14-16.5
m3/min
100-133-167
133-158-183
158-183-217
91-117-150
83-100-117
91-108-133
200-233-275
L/s
212-282-353
282-335-388
335-388-459
194-247-317
176-212-247
194-229-282
424-494-583
cfm
5-15-35-50
Pa
DC motor
0.096
kW
PP Honeycomb fabric (washable)
ø15.88 (ø5/8) Brazed
mm(in.)
ø12.7 (ø1/2) Brazed
ø9.52 (ø3/8) Brazed
mm(in.)
ø6.35 (ø1/4) Brazed
O.D. 32 (1-1/4)
mm(in.)
Air filter
Refrigerant Gas
pipe diameter Liquid
Field drain pipe diameter
Sound pressure level
(Lo-Mid-Hi)
dB<A>
(mesured in anechoic room)
Changeable static pressure
The unit is made suitable for a variety of applications with its four static pressure settings of 5, 15,
35, 50Pa.
22-24-28
23-25-29
24-26-30
24-27-32
28-30-33
30-32-35
30-33-36
Ultra low height unit with 200mm (7-28/32in.) high
Ultra-narrow width of 790mm (P15-P32 models)
[990mm for P40,50 models / 1190mm for P63 models]
Can be installed easily in tight spaces, such as ceiling cavities or drop-ceilings.
790mm
Choice for drain pump
Drain pump is an optional part for the VMS1L, and
a standard for VMS1.
*For places where low noise operation is especially
required (i.e. Hotels), VMS1L (without drain pump)
is recommended.
Ceiling surface
200mm
More than 10mm
Low, middle, and high fan speed settings deliver
precise comfort.
More than 20mm
Changeable airflow rate
Access door
Make the access door at the appointed position properly
for service maintenance.
Reduced noise thanks to the use of newly
designed centrifugal fan and coil
Sound pressure level table (Standard static pressure) at 15Pa
dB(A)
PP Honeycomb fabric
Washable PP Honeycomb fabric filter as standard
Capacity
Sound
High
pressure
Fan
Level Speed Mid
Low
P15
P20
P25
P32
P40
P50
P63
28
29
30
32
33
35
36
24
25
26
27
30
32
33
22
23
24
24
28
30
30
Notes:
*1
Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor : 27°CD.B./19°CW.B. (81°FD.B. / 66°FW.B.) Outdoor : 35°CD.B. (95°FD.B. )
Heating : Indoor : 20°CD.B. (68°FD.B.) Outdoor : 7°CD.B. / 6°CW.B. (45°FD.B. / 43°FW.B.)
Pipe length : 7.5m (24-9/16ft)
Height difference : 0m (0ft)
*2
The external static pressure is set to 15 Pa at factory shipment.
*3
[
] is in case of PEFY-P15-63VMS1L-E
*4 Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB, Outdoor 35°C(95°F)DB
Indoor unit
Page 103
Indoor unit
Page 104
INDOOR UNIT
Ceiling Concealed Type
Specifications
Slim Body
35~150Pa Height 250mm
With precise control of indoor temperature while operating with
optimum energy usage, it offers a high-energy saving efficiency.
Dimension H x W x D
Net weight
Heat exchanger
Type x Quantity
Air Inlet
(1) Rear inlet
Fan
(2) Bottom inlet
Air inlet
Motor
Air inlet
Air outlet
*1
*1
*2
*7
*2
*3
*3
*3
*3
Air outlet
* The units with bottom inlet make more noise than those with rear inlet.
It is recommended that the rear inlet be selected when installing the units in the
rooms that should be quiet such as bedrooms.
Compact Indoor Units
Drain Pump Option
For all models, unit height are unified to 250mm. Compared to the
previous model, the height size is reduced, allowing installation in
tight spaces, such as ceiling cavities or drop-ceilings.
The line-up consists of two types, models with or without a
built-in drain pump allowing more freedom in piping layout
design.
Airflow rate
(Low-Mid-High)
External static
pressure
*4
Type
Output
PEFY-P VMA-E Drain pump built-in
Reduction in height size
25
700
32
40
50
900
63 71 80 100 125 140
250
1,100
1,400 1,600
732
Fan
Motor
PEFY-P VMAL-E No Drain pump
* Units with a "L" at the end of the model name
are not equipped with a drain pump.
External static pressure
Analogue input
Five-stage external static pressure settings provide flexibility for
duct extension, branching and air outlet configuration and are
adjustable to meet different application conditions.
Setting ranges to a maximum of 150Pa.
Analogue input allows unit to control the fan speed setting in
conjunction with damper condition.
*1
*1
*2
*7
*2
*3
*3
*3
*3
Airflow rate
(Low-Mid-High)
External static
pressure
*4
Type
Output
IT terminal is available. For details, contact your local distributor.
0.085
0.085
6.35 (1/4) Brazed
12.7 (1/2) Brazed
O.D.32(1-1/4)
26-28-29
23-25-26
Note: *1 Cooling-only
Indoor unit
Page 105
DC motor
0.085
0.085
PP honeycomb fabric.
6.35 (1/4) Brazed
6.35 (1/4) Brazed
12.7 (1/2) Brazed
12.7 (1/2) Brazed
O.D.32(1-1/4)
O.D.32 (1-1/4)
28-30-34
23-26-29
0.085
0.121
6.35 (1/4) Brazed
12.7 (1/2) Brazed
O.D.32 (1-1/4)
9.52 (3/8) Brazed
15.88 (5/8) Brazed
O.D.32 (1-1/4)
28-32-35
25-29-32
29-32-36
25-29-33
28-30-34
23-27-30
m3/min
L/s
cfm
PEFY-P80VMA(L)-E PEFY-P100VMA(L)-E PEFY-P125VMA(L)-E PEFY-P140VMA(L)-E PEFY-P20VMA2-E
1-phase 220-230-240V 50 / 60Hz
14.0
8.0
9.0
11.2
16.0
2.2
47,800
27,300
30,700
38,200
54,600
7,500
14.2
8.1
9.2
11.4
16.3
—
16.0
9.0
10.0
12.5
18.0
—
54,600
30,700
34,100
42,700
61,400
—
0.34 [0.32]
0.14 [0.12]
0.14 [0.12]
0.24 [0.22]
0.36 [0.34]
0.110
0.32
0.12
0.12
0.22
0.34
—
2.05 [1.94]
1.15 [1.04]
1.15 [1.04]
1.47 [1.36]
2.21 [2.10]
0.90
1.94
1.04
1.04
1.36
2.10
—
Galvanized steel plate
250 x 1,400 x 732
250 x 1,100 x 732
250 x 1,100 x 732
250 x 1,400 x 732
250 x 1,600 x 732
250 x 900 x 732
9-7/8 x 43-5/16 x 28-7/8 9-7/8 x 43-5/16 x 28-7/8 9-7/8 x 55-1/8 x 28-7/8 9-7/8 x 55-1/8 x 28-7/8 9-7/8 x 63 x 28-7/8 9-7/8 x 35-7/16 x 28-7/8
46 (102) [45 (100)]
32 (71) [31 (69)]
32 (71) [31 (69)]
42 (93) [41 (91)]
42 (93) [41 (91)]
27(60)
Cross fin (Aluminum fin and copper tube)
Sirocco fan x 2
Sirocco fan x 1
29.5 - 35.5 - 42.0
14.5 - 18.0 - 21.0
14.5 - 18.0 - 21.0
23.0 - 28.0 - 33.0
28.0 - 34.0 - 40.0
12.0 - 14.5 - 17.0
492 - 592 - 700
242 - 300 - 350
242 - 300 - 350
383 - 467 - 550
467 - 567 - 667
200 - 242 - 283
512 - 636 - 742
512 - 636 - 742
812 - 989 - 1,165
989 - 1,201 - 1,412 1,042 - 1,254 - 1,483
424 - 512 - 600
Pa
<20> - <35> - 50 - <70> - <100> - <150> <20> - <35> - 50 - <70> - <100> - <150> <20> - <35> - 50 - <70> - <100> - <150> <20> - <35> - 50 - <70> - <100> - <150> <20> - <35> - 50 - <70> - <100> - <150> <35> - 50 - <70> - <100> - <125>
kW
BTU/h
kW
kW
BTU/h
kW
kW
A
A
mm
in.
kg(lbs)
kW
0.121
Air filter
Refrigerant
9.52 (3/8) Brazed
Liquid (R410A) mm(in.)
pipe diameter Gas (R410A) mm(in.)
15.88 (5/8) Brazed
Field drain pipe diameter mm(in.)
O.D.32 (1-1/4)
Sound pressure level (measured in anechoic room)
(Low-Mid-High) *3 *5 dB(A)
30-34-38
26-29-34
*3 *6 dB(A)
0.121
9.52 (3/8) Brazed
15.88 (5/8) Brazed
O.D.32 (1-1/4)
30-34-38
26-29-34
DC motor
0.244
0.244
PP honeycomb fabric.
9.52 (3/8) Brazed
9.52 (3/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
O.D.32 (1-1/4)
O.D.32 (1-1/4)
32-37-41
28-33-37
0.244
0.085
9.52 (3/8) Brazed
15.88 (5/8) Brazed
O.D.32 (1-1/4)
6.35 (1/4)Flare
12.7 (1/2)Flare
O.D.32 (1-1/4)
36-41-45
33-37-42
30-35-39
—
35-40-44
32-36-40
Notes:
*1
*2
IT terminal
kW
*3
*4
*5
Nominal cooling conditions
Indoor: 27°C(81°F)DB/19°C(66°F)WB, Outdoor: 35°C(95°F)DB
Pipe length: 7.5m(24-9/16ft.), Level difference: 0m(0ft.)
Nominal heating conditions
Indoor: 20°C(68°F)DB, Outdoor: 7°C(45°F)DB/6°C(43°F)WB
Pipe length: 7.5m(24-9/16ft.), Level difference: 0m(0ft.)
The values are measured at the rated external static pressure.
The rated external static pressure is shown without < >.The factory setting
is the rated value.
Aux. duct
Measured in anechoic room with a 1m
air inlet duct and 2m air outlet
2m
1m
duct attached to the unit and 1.5m
below the unit.
1.5m
External static pressure setting
Series
20 25 32 40 50 63 71 80 100 125 140
PEFY-P VMA(L)
35/50/70/100/150Pa
<20> - <35> - 50 - <70> - <100> - <150> <20> - <35> - 50 - <70> - <100> - <150> <20> - <35> - 50 - <70> - <100> - <150> <20> - <35> - 50 - <70> - <100> - <150> <20> - <35> - 50 - <70> - <100> - <150> <20> - <35> - 50 - <70> - <100> - <150>
PEFY-P71VMA(L)-E
Power source
Cooling capacity
(Nominal)
Cooling capacity
Heating capacity
(Nominal)
Power
Cooling
consumption Heating
Cooling
Current
Heating
External finish
Net weight
Heat exchanger
Type x Quantity
250mm
20
Pa
mm
in.
kg(lbs)
Air filter
Refrigerant
6.35 (1/4) Brazed
Liquid (R410A) mm(in.)
pipe diameter Gas (R410A) mm(in.)
12.7 (1/2) Brazed
Field drain pipe diameter mm(in.)
O.D.32 (1-1/4)
Sound pressure level (measured in anechoic room)
(Low-Mid-High) *3 *5 dB(A)
26-28-29
23-25-26
*3 *6 dB(A)
Dimension H x W x D
PEFY-P VMA(L)
Height mm
Width mm
Depth mm
m3/min
L/s
cfm
kW
BTU/h
kW
kW
BTU/h
kW
kW
A
A
PEFY-P25VMA(L)-E
Measurement location
*6
Measured in anechoic room with a 2m
air inlet duct and 2m air outlet
duct attached to the unit and 1.5m
below the unit.
Aux. duct
2m
1.5m
PEFY-P VMA(L)-E
PEFY-P VMA2-E*1
Middle Static Pressure
PEFY-P32VMA(L)-E PEFY-P40VMA(L)-E PEFY-P50VMA(L)-E PEFY-P63VMA(L)-E
1-phase 220-230-240V 50 / 60Hz
7.1
2.8
3.6
4.5
5.6
2.2
24,200
9,600
12,300
15,400
19,100
7,500
7.2
2.8
3.7
4.6
5.7
2.2
8.0
3.2
4.0
5.0
6.3
2.5
27,300
10,900
13,600
17,100
21,500
8,500
0.12 [0.10]
0.06 [0.04]
0.07 [0.05]
0.09 [0.07]
0.11 [0.09]
0.06 [0.04]
0.10
0.04
0.05
0.07
0.09
0.04
1.01 [0.90]
0.53 [0.42]
0.55 [0.44]
0.64 [0.53]
0.74 [0.63]
0.53 [0.42]
0.90
0.42
0.44
0.53
0.63
0.42
Galvanized steel plate
250 x 1,100 x 732
250 x 700 x 732
250 x 700 x 732
250 x 900 x 732
250 x 900 x 732
250 x 700 x 732
9-7/8 x 27-9/16 x 28-7/8 9-7/8 x 27-9/16 x 28-7/8 9-7/8 x 27-9/16 x 28-7/8 9-7/8 x 35-7/16 x 28-7/8 9-7/8 x 35-7/16 x 28-7/8 9-7/8 x 43-5/16 x 28-7/8
32 (71) [31(69)]
23 (51) [22 (49)]
23 (51) [22 (49)]
23 (51) [22 (49)]
26 (58) [25 (56)]
26 (58) [25 (56)]
Cross fin (Aluminum fin and copper tube)
Sirocco fan x 2
Sirocco fan x 1
13.5 - 16.0 - 19.0
7.5 - 9.0 - 10.5
6.0 - 7.5 - 8.5
6.0 - 7.5 - 8.5
10.0 - 12.0 - 14.0
12.0 - 14.5 - 17.0
225 - 267 - 317
125 - 150 - 175
100 - 125 - 142
100 - 125 - 142
167 - 200 - 233
200 - 242 - 283
477 - 565 - 671
265 - 318 - 371
212 - 265 - 300
212 - 265 - 300
353 - 424 - 494
424 - 512 - 600
PEFY-P20VMA(L)-E
Power source
Cooling capacity
(Nominal)
Cooling capacity
Heating capacity
(Nominal)
Power
Cooling
consumption Heating
Cooling
Current
Heating
External finish
2m
Measurement location
*7
Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB,
Outdoor 35°C(95°F)DB
*
[ ] is in case of PEFY-P VMAL-E
*
When PEFY-P20VMA2-E is connected, the available range of outdoor temperature is
between 10°C and 49°C.
Indoor unit
Page 106
INDOOR UNIT
Ceiling concealed
type
PEFY-P VMH(S)-E
Specifications
PEFY-P40VMH-E
Power source
Cooling capacity
Cooling capacity
High Static Pressure
Heating capacity
Increased design flexibility from sufficient external static pressure
allows authentic duct air- conditioning with an elegant interior layout.
Power
consumption
Current
*1
*1
*10
*1
*1
Cooling
Heating
Cooling
Heating
kW
BTU/h
kW
kW
BTU/h
kW
kW
A
A
External finish
Dimension H x W x D
Net weight
Heat exchanger
Type x Quantity
Fan
Airflow rate
(Lo-Hi)
mm
in.
kg(lbs.)
m3/min
L/s
cfm
Pa
Pa
External static 220V
pressure *2 230,240V
Type
Motor
Output
*3
kW
Air filter (option)
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
dB(A)
Sound pressure 220V
level (Lo-Hi) *6 230,240V dB(A)
High static pressure of 200 Pa or higher
One-side maintenance
The additional external static pressure capacity provides flexibility
for duct extension, branching and air outlet configuration.
PEFY-P VMH-E
External
static
pressure
(Pa)
P40 P50 P63 P71 P80 P100 P125 P140 P200 P250
220V
50/100/200
230/240V
100/150/200
380V
110/220
400/415V
130/260
PEFY-P VMHS-E
P200
P250
<50> – <100> – 150 – <200> – <250>*
External static pressure (Pa)
Power source
*The rated external static pressure is shown without < >.
The factory setting is the rated value.
Cooling capacity
All maintenance to the unit, including
fan inspection and fan motor removal,
can be conducted from the inspection
opening on one side.
(VMH model only)
Cooling capacity
Heating capacity
Drain pump (option) ensures up to 550mm (21-11/16in.)
for VMH model / 700mm (27-9/16in.)
for VMHS model of lift
The introduction of an upper drain pump allows the drain connection to
be raised as high as 550mm(21-11/16in.) for VMH model/700mm
(27-9/16in.) for VMHS model, allowing more freedom in piping layout
design and reducing horizontal piping requirements.
Sound pressure level table (Standard static pressure 220V)
dB(A)
Sound
High
pressure Fan
Level Speed
Low
P40
P50
P63
P71
P80
P100 P125 P140
34
34
38
39
41
42
42
42
27
27
32
32
35
34
34
34
MAX.
550
(21-11/16)
Cooling
Heating
380-415V
Cooling
220-230-240V
Current
380-415V
Heating
220-230-240V
External finish
Power
consumption
Reduced noise thanks to the use of
newly designed centrifugal fan
Capacity
*1
*1
*10
*1
*1
222
(8-3/4)
(700 (27-9/16) for
328
VMHS model) (12-15/16)
mm (in.)
Dimension H x W x D
Net weight
Heat exchanger
Type x Quantity
kW
BTU/h
kW
kW
BTU/h
kW
kW
A
A
A
A
mm
in.
kg(lbs.)
m3/min
L/s
cfm
m3/min
Lo-Mid-Hi
L/s
Fan
cfm
380V
Pa
External static 400,415V
Pa
pressure
Pa
mmH2O
Type
Motor
Output
kW
Air filter(option)
Gas
mm(in.)
(Brazing)
Refrigerant
pipe diameter Liquid
mm(in.)
(Brazing)
Field drain pipe diameter mm(in.)
dB(A)
380V
Sound pressure
400,415V dB(A)
level
Lo-Mid-Hi dB(A)
Airflow rate
PEFY-P50VMH-E
PEFY-P63VMH-E PEFY-P71VMH-E PEFY-P80VMH-E PEFY-P100VMH-E PEFY-P125VMH-E PEFY-P140VMH-E
1-phase 220-240V 50Hz / 1-phase 220-240V 60Hz
11.2
9.0
4.5
8.0
14.0
7.1
5.6
16.0
38,200
30,700
15,400
27,300
47,800
24,200
19,100
54,600
11.4
9.2
4.6
8.1
14.2
7.2
5.7
16.3
12.5
10.0
5.0
9.0
16.0
8.0
6.3
18.0
42,700
34,100
17,100
30,700
54,600
27,300
21,500
61,400
0.32 / 0.40
0.26 / 0.33
0.48 / 0.58
0.19 / 0.23
0.24 / 0.30
0.48 / 0.59
0.32 / 0.40
0.26 / 0.33
0.48 / 0.58
0.19 / 0.23
0.24 / 0.30
0.48 / 0.59
1.47 / 1.83
1.20 / 1.51
2.34 / 2.66
0.88 / 1.06
1.12 / 1.38
2.35 / 2.70
1.47 / 1.83
1.20 / 1.51
2.34 / 2.66
0.88 / 1.06
1.12 / 1.38
2.35 / 2.70
Galvanized
380 x 1,200 x 900
380 x 750 x 900
380 x 1,000 x 900
15 x 47-1/4 x 35-7/16
15 x 29-9/16 x 35-7/16
15 x 39-3/8 x 35-7/16
44 (98)
70 (155)
45 (100)
50 (111)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 2
Sirocco fan x 1
18.0-25.0
15.5-22.0
26.5-38.0
10.0-14.0
13.5-19.0
28.0-40.0
300-417
258-367
442-633
167-233
225-317
467-667
636-883
547-777
936-1342
353-494
477-671
989-1413
50 · 100 · 200
100 · 150 · 200
1-phase induction motor
0.18
0.14
0.08
0.26
0.12
Synthethic fiber unwoven cloth filter (long life)
ø12.7 (ø1/2)
ø15.88 (ø5/8)
ø9.52 (ø3/8)
ø6.35 (ø1/4)
27-34
31-37
32-38
36-41
O.D. 32 (1-1/4)
35-41
32-39
38-43
35-41
PEFY-P200VMH-E
PEFY-P250VMH-E
3-phase 380-415V 50Hz / 3N ~ 380-415V 60Hz
28.0
22.4
95,500
76,400
28.5
22.8
31.5
25.0
107,500
85,300
1.23 / 1.41
0.99 / 1.14
1.23 / 1.41
0.99 / 1.14
2.00 / 2.30
1.62 / 1.86
─
─
2.00 / 2.30
1.62 / 1.86
─
─
Galvanized
470 x 1,250 x 1,120
18-9/16 x 49-1/4 x 44-1/8
100 (221)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 2
72.0
58.0
1200
967
2543
2048
─
─
─
─
─
─
110 · 220 *4
130 · 260 *4
─
─
3-phase induction motor
1.08 *5
0.76 *5
Synthethic fiber unwoven cloth filter (long life)
ø22.2 (ø7/8)
ø19.05 (ø3/4)
34-42
38-44
PEFY-P200VMHS-E
PEFY-P250VMHS-E
1-phase 220-240V 50Hz / 1-phase 220-240V 60Hz
28.0
22.4
95,500
76,400
28.5
22.8
31.5
25.0
107,500
85,300
0.82 *7
0.63 *7
0.82 *7
0.63 *7
─
─
4.72-4.43-4.14 *7
3.47-3.32-3.18 *7
─
─
4.72-4.43-4.14 *7
3.47-3.32-3.18 *7
Galvanized steel plate
470 x 1,250 x 1,120
18-9/16 x 49-1/4 x 44-1/8
100 (221)
97 (214)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 2
─
─
─
─
─
─
58.0-71.0-84.0
50.0-61.0-72.0
967-1183-1400
833-1017-1200
2048-2507-2966
1766-2154-2542
─
─
<50>-<100>-150-<200>-<250> *8
<5.1>-<10.2>-15.3-<20.4>-<25.5> *8
DC motor
0.87
0.87
Synthethic fiber unwoven cloth filter (long life filter) and filter box are recommended.
ø9.52 (ø3/8)
O.D. 32 (1-1/4)
50 (110Pa) / 52 (220Pa) *6
42 (110Pa) / 45 (220Pa) *6
52 (130Pa) / 54 (260Pa) *6
44 (130Pa) / 47 (260Pa) *6
─
─
ø22.2 (ø7/8)
ø19.05 (ø3/4)
ø9.52 (ø3/8)
O.D. 32 (1-1/4)
─
─
36-39-43 *9
─
─
39-42-46 *9
Notes:
*1 Cooling/heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB, Outdoor : 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB, Outdoor : 7°C(45°F)DB/6°C(43°F)WB
*2 The external static pressure is set to 100Pa (at 220V) /150Pa (at 230, 240V) at factory shipment.
*3 The value are that at 240V.
*4 The external static pressure is set to 220Pa (at 380V) /260Pa (at 400, 415V) at factory shipment.
*5 The value are that at 415V.
Indoor unit
Page 107
*6 It is measured in anechoic room.
*7 The values are measured at the rated external static pressure.
*8 The rated external static pressure is shown without < >.
The factory setting is the rated value.
*9 It is measured at the rated external static pressure in anechoic room.
*10 Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB,
Outdoor 35°C(95°F)DB
Indoor unit
Page 108
INDOOR UNIT
Fresh Air Intake Type
Specifications
PEFY-P VMH-E-F
Power source
*1
*1
*1
Heating capacity
*1
Cooling
Power
consumption Heating
Cooling
Current
Heating
External finish
Dimension
HxWxD
Net weight
Heat exchanger
Type x Quantity
Cooling capacity
Fresh
Air Intake
Fresh Air can be taken in with temperature control.
Ideal for Offices, Stores and Restaurants.
Airflow rate
Fan
External
static
pressure
(Lo-Mid-Hi)
Type
Motor
Output
Air filter (option)
208V
220V
230V
240V
kW
BTU/h
kW
BTU/h
kW
kW
A
A
mm(in.)
kg(lbs.)
m3/min
L/s
cfm
Pa
Pa
Pa
Pa
kW
Gas
mm(in.)
(Flare)
Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
Sound pressure level 208, 220V dB(A)
(Lo-Mid-Hi)
*2 230, 240V dB(A)
PEFY-P80VMH-E-F
PEFY-P140VMH-E-F
1-phase 220-240V 50Hz / 1-phase 208-230V 60Hz
9.0
16.0
30,700
54,600
8.5
15.1
29,000
51,500
0.16 / 0.21
0.29 / 0.33
0.16 / 0.21
0.29 / 0.33
0.67 / 0.91
1.24 / 1.48
0.67 / 0.91
1.24 / 1.48
Galvanized
380 x 1000 x 900
380 x 1200 x 900
(15 x 39-3/8 x 35-7/16)
(15 x 47-1/4 x 35-7/16)
50 (111)
70 (155)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 1
Sirocco fan x 2
9.0
18.0
150
300
318
636
35 - 85 - 170
35 - 85 - 170
40 - 115 - 190
50 - 115 - 190
50 - 130 - 210
60 - 130 - 220
80 - 170 - 220
100 - 170 - 240
1-phase induction motor
0.09 (at 220V)
0.14 (at 220V)
Synthetic fiber unwoven cloth filter (long life)
ø15.88 (ø5/8)
Refrigerant
pipe diameter
Power source
The Fresh Air intake indoor unit
can be installed in any place.
Fresh Air can be taken in with temperature
control.
Outside air will be cooled down or heated
up to supply it to the room, and this
reduces the air conditioning load in a room.
High-capacity humidifier will keep room air
moist and comfortable during heating.
*Supply air temperature control cannot be
used.
Office, Lobby, Workshop,
Restroom, Nursing home,
Smoking corner,
Kitchen in restaurant
* Limits of capacity connectable to outdoor unit
Max. 110% of outdoor unit capacity, excepting heating at outdoor temperature of less than -5°C(23°F) (100%).
Cooling capacity
Heating capacity
Example
Outdoor
unit
Exhaust air
EA
Outdoor
unit
Supply air
Indoor
unit
Fresh air
R/C
A/C
Indoor
unit
Fresh air
A/C
Fresh Air
Intake Unit
Fresh air
OA
Fresh air
R/C
< Note>
Fan remains in operation during Thermo-OFF. Using this model with other type of
indoor unit is recommended to prevent cold draft which is caused due to intaken fresh
air.
kW
BTU/h
kW
BTU/h
kW
kW
A
A
Cooling
Power
consumption Heating
Cooling
Current
Heating
External finish
Dimension
mm(in.)
HxWxD
kg(lbs.)
Net weight
Heat exchanger
Type x Quantity
m3/min
L/s
Airflow rate
cfm
Fan
Pa
External 380V
Pa
400V
static
Pa
pressure 415V
Type
Motor
kW
Output
Air filter (option)
Gas
mm(in.)
Refrigerant
(Flare)
pipe diameter Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
dB(A)
380V
Sound pressure
dB(A)
400V
level
*2
dB(A)
415V
ø9.52 (ø3/8)
27 - 38 - 43
33 - 43 - 45
O.D.32 (1-1/4)
28 - 38 - 43
34 - 43 - 45
PEFY-P200VMH-E-F
PEFY-P250 VMH-E-F
3-phase 380-415V 50Hz / 3N~ 380-415V 60Hz
22.4
28.0
76,400
95,500
21.2
26.5
72,300
90,400
0.34 / 0.42
0.39 / 0.50
0.34 / 0.42
0.39 / 0.50
0.58 / 0.74
0.68 / 0.86
0.58 / 0.74
0.68 / 0.86
Galvanized
470 x 1250 x 1120
(18-9/16 x 49-1/4 x 44-1/8)
100 (221)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 2
28
35
467
583
989
1236
140 / 200
110 / 190
150 / 210
120 / 200
160 / 220
130 / 210
3-phase induction motor
0.20
0.23
Synthetic fiber unwoven cloth filter (long life type)
ø19.05 (ø3/4)
ø22.2 (ø7/8)
ø9.52 (ø3/8)
39 / 42
40 / 43
40 / 44
O.D.32 (1-1/4)
40 / 44
40 / 45
41 / 46
Notes:
1. The cooling and heating capacites are the maximum capacites that were obitained by operating in the above air conditions and with a refrigerant pipe of about 7.5m.
2 .The actual capacity characteristics vary with the combination of indoor and outdoor units. See the technical infomation.
3 .The operating noise is the data that was obitained by measuring it 1.5m from the the bottom of the unit in an anechoic room. (Noise meter A-scale value)
4 .The figure of Electrical characteristic indicates at 240V 50Hz/230V60Hz (PEFY-P80, 140VHM-E-F type), at 220Pa setting at 415V (PEFY-P200, 250VMH-E-F type).
5 . When the 100% fresh air indoor units are connected, the maximum connectable indoor units to 1 outdoor unit are as follows
Heat pump models
Cooling only
110%(100% in case of heating below-5°C(23°F))
110%
6. Operational temp range is
: from 21°C(70°F)DB/15.5°C(60°F)WB to 43°C(109°F)DB/35°C(95°F)WB
( Cooling
)
Heating : from -10°C(14°F)DB to 20°C(68°F)DB
* Thermo off(Fan) operation automatically starts either when temperature is lower than 21°C(70°F)DB in cooling mode or when the temperature exceeds 20°C(68°F)DB in heating mode.
7. As the room temp in sensed by the thermo in the remote controller or the one in the room, be sure to use either remote controller or room thermo.
8. Autochangeover function or Dry mode is NOT available. Fan mode operation during the thermo off in Cooling/Heating mode.
9. In any case, the air flow rate should be kept lower than 110% of the above chart. Please see "Fan curves" for the details.
10. When this unit is used as sole A/C system, be careful about the dew in air outlet grilles in cooling mode.
11. Un-conditioned outdoor air such as humid air or cold air blows to the indoor during thermo off operation.
Please be careful when positioning indoor unit air outlet grilles, ie take the necessary precautions for cold air, and also insulate rooms for dew condensation prevention as required.
12. Air filter must be installed in the air intake side. The filter should be attached where easy maintenance in possible in case of usage of fild supply filters.
13. Long life cannot be used with Hi-efficiency filter together (PEFY-P80 . 140VMH-E-F type).
Indoor unit
Page 109
Indoor unit
Page 110
INDOOR UNIT
Ceiling suspended type
Specifications
PCFY-P40VKM-E
PCFY-P VKM-E
Power source
*1
kW
*1 BTU/h
*4
kW
Cooling capacity
*1
kW
Heating capacity
*1 BTU/h
kW
Cooling
Power
kW
consumption Heating
A
Cooling
Current
A
Heating
External finish(Munsell No.)
mm
Dimension H x W x D
in.
kg(lbs.)
Net weight
Heat exchanger
Type x Quantity
*2 m3/min
Airflow rate
L/s
Fan
(Lo-Mid2-Mid1-Hi)
cfm
Pa
External static pressure
Type
Motor
kW
Output
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
Sound pressure level
dB(A)
(Lo-Mid2-Mid1-Hi) *2 *3
4.5
15,400
4.6
5.0
17,100
0.04
0.04
0.28
0.28
Cooling capacity
Designed for ultra-quiet operation and easy maintenance,
provides exceptionally comfortable air-conditioning.
230 x 960 x 680
9-1/16 x 37-13/16 x 26-3/4
24(53)
Sirocco fan x 2
10-11-12-13
167-183-200-217
353-388-424-459
0.090
ø12.7 (ø1/2)
PCFY-P63VKM-E
PCFY-P100VKM-E
PCFY-P125VKM-E
1-phase 220-240V 50Hz / 1-phase 220V 60Hz
14.0
11.2
7.1
47,800
38,200
24,200
14.2
11.4
7.2
16.0
12.5
8.0
54,600
42,700
27,300
0.11
0.09
0.05
0.11
0.09
0.05
0.76
0.65
0.33
0.76
0.65
0.33
6.4Y 8.9/ 0.4
230 x 1,600 x 680
230 x 1,280 x 680
9-1/16 x 63 x 26-3/4
9-1/16 x 50-3/8 x 26-3/4
38 (84)
36 (79)
32 (71)
Cross fin (Aluminum fin and copper tube)
Sirocco fan x 4
Sirocco fan x 3
21-24-27-31
21-24-26-28
14-15-16-18
350-400-450-517
350-400-433-467
233-250-267-300
742-847-953-1,095
742-847-918-989
494-530-565-636
0
DC motor
0.160
0.095
PP Honeycomb (long life)
ø15.88 (ø5/8)
ø15.88 (ø5/8) / ø19.05 (ø3/4) (Compatible)
ø9.52 (ø3/8)
ø6.35 (ø1/4)
O.D. 26 (1)
29-32-34-36
31-33-35-37
36-38-41-43
36-39-42-44
Drain pump option available with all models
Sleek and slim with stylishly curved lines, the PCFY series
blends right into any interior. It also features a single air outlet
which allows the auto vane to act as a shutter when the unit is
turned off.
Auto vane distributes air evenly
The pumping height of the
optional drain pump has been
increased from 400 mm to 600
mm, expanding flexibility in choosing unit location during installation
work.
Units are equipped with a
knock-out hole that enables
the induction of fresh outsideair.
Long life filter as standard
Drain pump
installation possible
Drainage outlet
can be 600mm
above ceiling
surface
Ceiling surface
Outside-air intake
The auto vane swings up and down automatically to distribute air
more evenly to every corner of the room.
Long life filter is equipped as standard enabling up to 2,500
hours of operation (office use) without maintenance.
Outside-air intake characteristics
Static pressure (Pa)
Extra slim, extra stylish
50
0
-50
-100
PCFY-P100-P125VKM
PCFY-P63VKM
PCFY-P40VKM
-150
-200
-250
-300
0
1
2
Airflow volume (m
3
3/min)
4
Equipped with automatic air-speed adjustment
Keeps airflow at optimum level
according to ceiling height
The most suitable airflow can be selected for ceilings up to 4.2m
high, enhancing air-conditioning efficiency and comfort. (P100/P125)
Ceiling height
Standard
High ceiling
3.0(9-13/16)
4.2(13-3/4)
m (ft)
Greatly simplified installation
The direct suspension system eliminates the task of removing
the attachment fixture from the main unit, greatly shortening
installation time.
Indoor unit
Page 111
In addition to the conventional 4-speed setting, units are now
equipped with and automatic air-speed adjustment mode. This
setting automatically adjusts the air-speed to conditions that
match the room environment. At the start of heating/cooling
operation, the airflow is set to high-speed to quickly heat/cool the
room. When the room temperature reaches the desired setting,
the airflow speed is decreased automatically for stable comfortable heating/cooling operation.
Strong
Start of cooling/heating
Gentle
After room temperature is stabilized
Notes:
*1
Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(80.6°F)DB/19°C(66.2°F)WB,Outdoor 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB,Outdoor 7°C(44.6°F)DB/6°C(42.8°F)WB
*2
Airflw rate/Sound pressure level are shown in (low-middle 2-middle 1-high).
*3
It is measured in anechoic room.
*4 Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB, Outdoor 35°C(95°F)DB
Indoor unit
Page 112
INDOOR UNIT
Wall mounted type
Specifications
PKFY-P VBM
PKFY-P VBM-E
PKFY-P VHM-E
PKFY-P VKM-E
PKFY-P VHM
PKFY-P15VBM-E
Power source
*1
*1
*5
*1
*1
kW
BTU/h
kW
Cooling capacity
kW
Heating capacity
BTU/h
kW
Cooling *4
Power
kW
consumption Heating
A
Cooling *4
Current
A
Heating
External finish(Munsell No.)
mm(in.)
Dimension H x W x D
kg(lbs.)
Net weight
Heat exchanger
Type x Quantity
*2 m3/min
Airflow rate
L/s
Fan
(Lo-Mid2-Mid1-Hi)
cfm
External static pressure
Pa
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
Liquid
pipe diameter
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
Sound pressure level
dB(A)
(Lo-Mid2-Mid1-Hi) *2 *3
Cooling capacity
PKFY-P VKM
Elegant Design and Compact Dimensions Ideal for Offices,
Stores and Residential Uses.
Capacity range
Capacity P15 P20 P25 P32 P40 P50 P63 P100
VBM*
VHM
VKM
*External LEV box (optional) is recommended for hotels, hospitals
or dormitories where the background noise is low.
PKFY-P20VBM-E
PKFY-P25VBM-E
PKFY-P32VHM-E
1-phase 220-240V 50Hz / 1-phase 220V 60Hz
2.8
3.6
9,600
12,300
2.8
3.7
3.2
4.0
10,900
13,600
PKFY-P40VHM-E
PKFY-P50VHM-E
5.6
4.5
19,100
15,400
5.7
4.6
6.3
5.0
21,500
17,100
0.04
0.04
0.03
0.04
0.40
0.20
0.30
0.20
Plastic (1.0Y 9.2/0.2)
Plastic (1.0Y 9.2/0.2)
295 x 898 x 249(11-5/8 x 35-3/8 x 9-13/16)
295 x 815 x 225 (11-5/8 x 32-1/8 x 8-7/8)
13(29)
10 (23)
Cross fin (Aluminum fin and copper tube)
Line flow fan x 1
9-10.5-12
9-10.5-11.5
4.9-5.0-5.2-5.3
9-10-11
4.9-5.2-5.6-5.9
150-175-200
150-175-192
82-83-87-88
150-167-183
82-87-93-98
318-371-424
318-371-406
173-177-184-187
318-353-388
173-184-198-208
0
DC motor
1-phase induction motor
0.030
0.017
PP Honeycomb
ø12.7 (ø1/2) / ø15.88 (ø5/8)
ø12.7 (ø1/2)
(Compatible)
ø6.35 (ø1/4) / ø9.52 (ø3/8)
ø6.35 (ø1/4)
(Compatible)
I.D.16 (5/8)
1.7
5,800
1.7
1.9
6,500
2.2
7,500
2.2
2.5
8,500
29-31-32-33
34-37-41
29-31-34-36
34-38-41
34-39-43
Notes:
4-way piping provides more flexibility in selecting installation sites
All piping including drainage can be connected from the rear, right, base,
and left of the unit, providing much greater flexibility in piping and
selecting installation site.
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB,Outdoor 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB,Outdoor 7°C(45°F)DB/6°C(43°F)WB
*2 Airflow rate/Sound pressure level are in (low-middle2-middle1-high).
*3 It is measured in anechoic room.
*4 Electrical characteristic of cooling are included optional drain-pump.
*5 Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB, Outdoor 35°C(95°F)DB
Flat panel & Pure white finish
All models have changed from the grill
design, adopting the flat panel layout.
Pursuing a design that harmonizes with
virtually any interior, the unit color has been
changed from white to pure white.
Power source
PKFY-P VGM
PKFY-P VHM
PKFY-P VKM
PKFY-P VFM
Built-in signal receiver
PKFY-P VBM features
Compact profile
PKFY-P VHM features
Compact size of 898mm
Light unit
Width size reduced to match small
size buildings and offices.
Approx. 3kg reduced from conventional
model (P32-50). Easier installation.
-45mm
Drain pump (option)
-92mm
Quiet operation
898mm
Comparison with PKFY-P VGM-E
The optional drain pump allows the
drain connection to be raised as high
as 800mm, allowing more freedom in
piping layout design.
Drain pump
800mm
Indoor unit
*1
*1
*5
*1
*1
kW
BTU/h
kW
Cooling capacity
kW
Heating capacity
BTU/h
kW
Cooling *4
Power
kW
consumption Heating
A
Cooling *4
Current
A
Heating
External finish(Munsell No.)
mm(in.)
Dimension H x W x D
kg(lbs.)
Net weight
Heat exchanger
Type x Quantity
*2 m3/min
Airflow rate
L/s
Fan
(Lo-Hi)
cfm
External static pressure
Pa
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
Sound pressure level
dB(A)
(Lo-Hi)
*2 *3
Cooling capacity
PKFY-P63VKM-E
PKFY-P100VKM-E
1-phase 220-230-240V 50Hz / 1-phase 220V 60Hz
11.2
7.1
38,200
24,200
11.4
7.2
12.5
8.0
42,600
27,300
0.08
0.05
0.07
0.04
0.58
0.37
0.51
0.30
Plastic (1.0Y 9.2/0.2)
365 x 1,170 x 295 (14-3/8 x 46-1/16 x 11-5/8)
21 (46)
Cross fin (Aluminum fin and copper tube)
Line flow fan x 1
20-26
16-20
333-433
267-333
706-918
565-706
0
DC motor
0.056
PP Honeycomb
ø15.88 (ø5/8) / ø19.05 (ø3/4)
ø15.88 (ø5/8)
(Compatible)
ø9.52 (ø3/8)
I.D. 16(5/8)
39-45
41-49
Notes:
*1 Cooling/heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB, Outdoor : 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB, Outdoor : 7°C(45°F)DB/6°C(43°F)WB
*2 Airflow rate/Sound pressure level are in (low-high).
*3 It is measured in anechoic room.
*4 Electrical characteristic of cooling are included optional drain-pump.
*5 Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB, Outdoor 35°C(95°F)DB
Indoor unit
Page 113
Indoor unit
Page 114
INDOOR UNIT
Floor standing exposed
Specifications
PFFY-P20VKM-E2
PFFY-P VKM-E2
Power source
*1
*1
Cooling capacity
*4
*1
Heating capacity
*1
Cooling
Power
Heating
consumption
Cooling
Current
Heating
External finish
Dimension
HxWxD
Net weight
Heat exchanger
Type x Quantity
Airflow rate *2
(Lo-Mid-Hi-SHi)
Fan
Eaternal static
pressure
Type
Motor
Output
Cooling capacity
PFFY-P VKM-E
For living rooms, bed rooms, or offices where a sophisticated
design is required. The latest Mitsubishi innovation – floor-standing
air-conditioner sophisticated in design, rich in function.
Quiet operation
Mitsubishi Electric air conditioners have
always been some of the quietest models
available in the market. Our new
floorstanding models are no exception.
It can create a silent and comfortable
space where the occupants would not
even recognize the existence of air
conditioner operation.
ONLY
*2.5kw class
Noise level Quiet passenger
27dB
2.2
7,500
2.2
2.5
8,500
0.025
0.025
0.20
0.20
kW
BTU/h
kW
kW
BTU/h
kW
kW
A
A
mm
in.
kg(lbs.)
m3/min
PFFY-P25VKM-E2
PFFY-P32VKM-E2
1-phase 220-240V 50Hz
3.6
2.8
12,300
9,600
3.7
2.8
4.0
3.2
13,600
10,900
0.025
0.025
0.025
0.025
0.20
0.20
0.20
0.20
Plastic (Pure white)
600 x 700 x 200
23-5/8 x 27-9/16 x 7-7/8
15 (34)
Cross fin (Alminium plate fin and copper tube)
Line flow fan x 2
5.9-6.8-7.6-8.7
4.5
15,400
4.6
5.0
17,100
0.028
0.028
0.24
0.24
8.0-9.0-9.5-10.7
0
Pa
kW
Air filter
Gas(Flare) mm(in.)
Refrigerant
pipe diameter Liquid(Flare) mm(in.)
Field drain pipe diameter
Sound pressure level
dB(A)
(Lo-Mid-Hi-SHi)
*2
6.1-7.0-8.0-9.1
6.1-7.0-8.0-9.1
PFFY-P40VKM-E2
DC motor
0.03 x 2
PP honeycomb fabric (Catechin Filter)
ø12.7 (ø1/2)
ø6.35 (ø1/4)
I.D.16 (5/8)
27-31-34-37
28-32-35-38
28-32-35-38
35-38-42-44
Human
Subway car
interior
car interior
(40km/h)
Library interior
80dB
60dB
40dB
hearing limits
Sound of
rustling leaves (Extremely quiet)
27dB
10dB
the
quietest!
Sophisticated Design
Optimum Air Distribution
From Mitsubishi
Deluxe look in
Electric, an
“Glossy Pure White” color
innovative new
floor-standing
air-conditioner.
Sleek louvers look just like
Our pleasing mix
flat panels
of streamlined
form and
Smart upper/lower air outlets
diversified
close when switched off
function.
Engineered to
keep room walls free, furnish comfy cooling in summer, toasty
heating in winter.
The “Glossy Pure White” colour ensures a deluxe look, the
perfect match for any room. Both upper and lower air outlets
remain closed when switched OFF, in a smart and striking
image.
A superb new air-conditioner from Mitsubishi, providing a
handsome fit for your own distinctive interior.
Comfy room temperatures are realized by the optimum, powerful
and efficient air distribution through upper and lower air outlets.
The upper vane angle is remote controllable, with 5 air flow
direction levels (+Swing and Auto modes) and 4 wind power
levels (+Auto mode).
By setting the vane angle almost vertical, annoying direct wind
can be avoided for your better comfort.
Slim but Mighty
600 mm
The unit body is slim and
trim, the essence in compact.
An ideal size for living
rooms, bedrooms, and more.
The removable and washable
front panel makes cleaning
200
700 mm
a snap.
mm
Easy and regular cleaning
allows your air-conditioner stay beautiful while keeping its
energy-efficient operation always possible.
The air from both upper and lower air
outlets is optimally controlled and distributed
evenly to every corner of the room. In
heating mode, the warm air is smartly
controlled to stay at the floor level: Your feet
do not feel chilled any more!
14 16 18 20 22 24 26 °C
Notes:
*1 Cooling/heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB, Outdoor : 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB, Outdoor : 7°C(45°F)DB/6°C(43°F)WB
*2 Airflow rate/Sound pressure level are in (low-middle-high-shigh).
*3 It is measured in anechoic room.
*4 Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB, Outdoor 35°C(95°F)DB
Indoor unit
Page 115
Indoor unit
Page 116
INDOOR UNIT
Floor standing exposed
PFFY-P VLEM-E
A compact cased unit providing simple, effective air conditioning
in perimeter zones.
Specifications
PFFY-P63VLEM-E
PFFY-P50VLEM-E
PFFY-P40VLEM-E
PFFY-P32VLEM-E
PFFY-P25VLEM-E
1-phase 220-240V 50Hz / 1-phase 208-230V 60Hz
7.1
5.6
4.5
3.6
2.8
2.2
24,200
19,100
15,400
12,300
9,600
7,500
7.2
5.7
4.6
3.7
2.8
2.2
8.0
6.3
5.0
4.0
3.2
2.5
27,300
21,500
17,100
13,600
10,900
8,500
0.1 / 0.11
0.085 / 0.09
0.065 / 0.075
0.06 / 0.07
0.04 / 0.06
0.1 / 0.11
0.085 / 0.09
0.065 / 0.075
0.06 / 0.07
0.04 / 0.06
0.46 / 0.47
0.40 / 0.41
0.32 / 0.33
0.29 / 0.30
0.19 / 0.25
0.46 / 0.47
0.40 / 0.41
0.32 / 0.33
0.29 / 0.30
0.19 / 0.25
Acrylic paint (5Y 8/1)
630 x 1,170 x 220
630 x 1,410 x 220
630 x 1,050 x 220
24-13/16 x 46-1/8 x 8-11/16
24-13/16 x 55-9/16 x 8-11/16
24-13/16 x 41-3/8 x 8-11/16
32 (71)
30 (67)
26 (58)
25 (56)
23 (51)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 1
Sirocco fan x 2
12.0-15.5
12.0-14.0
9.0-11.0
7.0-9.0
5.5-6.5
200-258
200-233
150-183
117-150
92-108
424-547
424-494
318-388
247-318
194-230
0
1-phase induction motor
0.050
0.035
0.030
0.018
0.015
PP Honeycomb fabric (washable)
PFFY-P20VLEM-E
Power source
kW
BTU/h
kW
kW
BTU/h
kW
kW
A
A
External finish(Munsell No.)
mm
Dimension H x W x D
in.
kg(lbs.)
Net weight
Heat exchanger
Type x Quantity
m3/min
Airflow rate
L/s
Fan
*2
(Lo-Hi)
cfm
Pa
External static pressure
Type
Motor
kW
Output
Air filter
Gas
mm(in.)
Refrigerant
(Flare)
pipe diameter Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
Sound pressure level
dB(A)
(Lo-Hi)
*2 *3 *4
*1
*1
Cooling capacity
*5
*1
Heating capacity
*1
Cooling
Power
consumption Heating
Cooling
Current
Heating
Cooling capacity
ø12.7 (ø1/2)
ø15.88 (ø5/8)
ø6.35 (ø1/4)
ø9.52 (ø3/8)
I.D.26 (1) <Accessory hose O.D.27 (1-3/32) (top end :20 (13/16))>
34-40
35-40
38-43
40-46
Its basic design is suitable for various locations such as offices, shops, and hospitals.
A remote controller can be mounted on the unit on site.
Compact unit for easy air conditioning in perimeter zones.
The unit is easy to install, and at only 220mm (8-11/16 in.) deep offers an unobtrusive
method of delivering highly efficient air conditioning performance.
Notes:
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB,Outdoor 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB, Outdoor 7°C(45°F)DB/6°C(43°F)WB
*2 Air flow rate/Sound pressure level are in (Low-High)
*3 Measured point : 1m x 1m, Power supply : AC240V/50Hz
· 1dB(A) lower at AC230V/50Hz
· 2dB(A) lower at AC220V/50Hz
· 3dB(A) lower at 1.5m x 1.5m point
*4 It is measured in anechoic room.
*5 Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB, Outdoor 35°C(95°F)DB
Indoor unit
Page 117
Indoor unit
Page 118
INDOOR UNIT
Floor mounted concealed type
Specifications
PFFY-P50VLRM-E
PFFY-P40VLRM-E
PFFY-P32VLRM-E
PFFY-P25VLRM-E
PFFY-P63VLRM-E
1-phase 220-240V 50Hz / 1-phase 208-230V 60Hz
5.6
4.5
3.6
2.8
2.2
7.1
19,100
15,400
12,300
9,600
7,500
24,200
5.7
4.6
3.7
2.8
2.2
7.2
6.3
5.0
4.0
3.2
2.5
8.0
21,500
17,100
13,600
10,900
8,500
27,300
0.085 / 0.09
0.065 / 0.075
0.06 / 0.07
0.04 / 0.06
0.1 / 0.11
0.085 / 0.09
0.065 / 0.075
0.06 / 0.07
0.04 / 0.06
0.1 / 0.11
0.40 / 0.41
0.32 / 0.33
0.29 / 0.30
0.19 / 0.25
0.46 / 0.47
0.40 / 0.41
0.32 / 0.33
0.29 / 0.30
0.19 / 0.25
0.46 / 0.47
Galvanized steel plate
639 x 1,006 x 220
639 x 1,246 x 220
639 x 886 x 220
25-3/16 x 39-5/8 x 8-11/16
25-3/16 x 49-1/16 x 8-11/16
25-3/16 x 34-15/16 x 8-11/16
25 (56)
21 (47)
20 (45)
18.5 (41)
27 (60)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 1
Sirocco fan x 2
12.0-14.0
9.0-11.0
7.0-9.0
5.5-6.5
12.0-15.5
150-183
117-150
92-108
200-258
200-233
318-388
247-318
194-230
424-547
424-494
0
1-phase induction motor
0.030
0.018
0.015
0.050
0.035
PP Honeycomb fabric (washable)
PFFY-P20VLRM-E
PFFY-P VLRM-E
PFFY-P VLRMM-E
Power source
*1
kW
*1 BTU/h
Cooling capacity
*5
kW
*1
kW
Heating capacity
*1 BTU/h
Cooling
Power
kW
consumption Heating
kW
Cooling
A
Current
Heating
A
External finish(Munsell No.)
mm
Dimension H x W x D
in.
Net weight
kg(lbs.)
Heat exchanger
Type x Quantity
*2 m3/min
Airflow rate
Fan
L/s
(Lo-Hi)
cfm
External static pressure
Pa
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
Refrigerant
(Flare)
pipe diameter Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
Sound pressure level
(Lo-Hi)
*2 *3 *4 dB(A)
Cooling capacity
Easily installable floor-standing concealed unit for perimeter zone
SA
ø12.7 (ø1/2)
ø15.88 (ø5/8)
ø6.35 (ø1/4)
ø9.52 (ø3/8)
I.D.26 (1) <Accessory hose O.D.27 (1-3/32) (top end :20 (13/16))>
34-40
35-40
38-43
40-46
Notes:
RA
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB, Outdoor 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB, Outdoor 7°C(45°F)DB/6°C(43°F)WB
installation image
(PFFY-P VLRMM-E)
*2 Air flow rate/Sound pressure level are in (Low-High)
*3 Measured point : 1m x 1m, Power supply : AC240V/50Hz
· 1dB(A) lower at AC230V/50Hz
· 2dB(A) lower at AC220V/50Hz
· 3dB(A) lower at 1.5m x 1.5m point
*4 It is measured in anechoic room.
*5 Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB, Outdoor 35°C(95°F)DB
Compact unit for easy air conditioning in perimeter zones.
The unit is designed for applications requiring a built-in, concealed, floor-standing
unit.
Installation flexibility
The unit can be field-converted from top discharge to front discharge to increase
installation flexibility.
Maximum external static pressure 60Pa (VLRMM model)
The additional external static pressure capacity provides flexibility for duct
extension, branching, and air outlet configuration.
Power source
kW
*1
BTU/h
*1
Cooling capacity
kW
*4
kW
*1
Heating capacity
BTU/h
*1
Power
kW
Cooling
consumption Heating
kW
A
Cooling
Current
A
Heating
External finish(Munsell No.)
mm
Dimension H x W x D
in.
Net weight
kg(lbs.)
Heat exchanger
Type x Quantity
m3/min
Airflow rate
Fan
L/s
(Lo-Mid-Hi)
cfm
External static pressure *2
Pa
Type
Motor
Output
kW
Air filter
Refrigerant
Gas
mm(in.)
pipe diameter Liquid mm(in.)
Field drain pipe diameter mm(in.)
Sound pressure 20Pa
dB(A)
level (Lo-Mid-Hi) 40Pa
dB(A)
*3 60Pa
dB(A)
Cooling capacity
PFFY-P20VLRMM-E PFFY-P25VLRMM-E PFFY-P32VLRMM-E PFFY-P40VLRMM-E PFFY-P50VLRMM-E PFFY-P63VLRMM-E
1-phase 220-240V 50Hz / 1-phase 220-240V 60Hz
7.1
5.6
4.5
2.8
2.2
3.6
24,200
19,100
15,400
9,600
7,500
12,300
7.2
5.7
4.6
2.8
2.2
3.7
5.7
6.3
5.0
3.2
2.5
4.0
8.0
21,500
17,100
10,900
8,500
13,600
27,300
0.05
0.05
0.04
0.04
0.07
0.05
0.05
0.04
0.04
0.07
0.48
0.43
0.38
0.34
0.59
0.48
0.43
0.38
0.34
0.59
Galvanized steel plate
639 x 1,006 x 220
639 x 1,246 x 220
639 x 886 x 220
25-3/16 x 39-5/8 x 8-11/16
25-3/16 x 49-1/16 x 8-11/16
25-3/16 x 34-15/16 x 8-11/16
25 (56)
21 (47)
20 (45)
18.5 (41)
27 (60)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 2
Sirocco fan x 1
11.0-13.0-15.5
10.0-12.0-14.0
8.0-9.5-11.0
6.5-7.5-9.0
4.5-5.5-6.5
183-217-258
167-200-233
133-158-183
108-125-150
75-92-108
388-459-547
353-424-494
282-335-388
230-265-318
159-194-230
20/40/60
DC brushless motor
0.096
PP Honeycomb fabric (washable)
ø15.88 (ø5/8) Brazed
ø12.7 (ø1/2) Brazed
ø9.52 (ø3/8) Brazed
ø6.35 (ø1/4) Brazed
I.D.26 (1) <Accessory hose O.D.27 (1-3/32) (top end :20 (13/16))>
35-40-44
32-37-41
30-36-40
27-32-37
31-36-40
36-42-47
35-40-44
32-38-42
30-35-41
34-39-42
38-43-48
36-41-45
3.5-39-44
32-37-42
35-40-43
Notes:
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB, Outdoor 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB, Outdoor 7°C(45°F)DB/6°C(43°F)WB
pipe length : 7.5m(24-9/16ft)
Height difference : 0m(0ft)
*2 The external static pressure is set to 20Pa at factory shipment.
*3 The sound pressure level in operation is measured at 1m apart from the front side and the bottom side of the unit in anechoic room.
(Noise meter A-scale value) Connect the duct of 1m in length to the air outlet.
Indoor unit
Page 119
*4 Reference data under condition of Indoor 27°C(81°F)DB/19.5°C(67°F)WB, Outdoor 35°C(95°F)DB
Indoor unit
Page 120
The Ventilation System for Enhanced Air Quality - Lossnay
LOSSNAY Technology
Combine with Lossnay Ventilation System Enhanced Air Quality.
Unified Control System Allows Greater Design Freedom.
• Two paths ventilation
LOSSNAY simultaneously intakes Fresh Air and exhausts Dirty Air.
• Total energy recover
LOSSNAY returns BOTH sensible heat and latent heat.
0°C (32
4°C (39.2
A. Two paths ventilation
°F)
Stale hot air (exhaust)
EA
Stale air exhaust
(dirty indoor air)
°F)
Fresh cool air (outdoor)
Outdoors
Indoors
B. Total Energy transfer
SA
Fresh air exhaust
(fresh heating/cooling air)
Partition plate
Spacer plate
OA
RA
Fresh air induction
(fresh air)
20°C (68
°F)
Stale warm air (indoor air)
16°C
Stale air induction
(dirty heating/cooling air)
Sensible heat
• Hyper Eco Core
Better energy conservation by improved total heat exchange efficiency.
(60.8°F)
Fresh warm air (indoor supply air)
LGH-15RX5
LGH-25RX5
LGH-35RX5
LGH-50RX5
LGH-65RX5
[150m3/h Single phase 220-240V 50Hz]
[250m3/h Single phase 220-240V 50Hz]
[350m3/h Single phase 220-240V 50Hz]
[500m3/h Single phase 220-240V 50Hz]
[650m3/h Single phase 220-240V 50Hz]
LGH-80RX5
LGH-100RX5
LGH-150RX5
LGH-200RX5
Introducing the new Hyper Eco Element
Mitsubishi's newly developed Hyper Eco Element is on
board, offering the industry's best total heat exchange
efficiency. Energy conservation performance has been
improved not only by reducing the air conditioning load
associated with ventilation, but also by facilitating humidity
penetration.
[800m3/h Single phase 220-240V 50Hz]
[1000m3/h Single phase 220-240V 50Hz]
[1500m3/h Single phase 220-240V 50Hz]
[2000m3/h Single phase 220-240V 50Hz]
Outdoors
EA
(exhaust air)
Indoors
SA
(supply air)
Element Structure
Enthalpy exchange efficiency improve
*Cooling, High Fan speed, 50Hz
RX4
74%
Heat-Exchange Efficiency Obtainable Only with Lossnay.
The secret to the unmatched comfort provided by Lossnay core is the cross-flow, plate-fin structure off the
heat-exchange unit. A diaphragm made of a specially processed paper fully separates inducted and exhausted air
supplies, ensuring that only fresh air is introduced to the indoor environment.
The superior heat-transfer and moisture permeability of the special paper assure highly effective total heat exchange
(temperature and humidity) when inducted and exhausted air supplies cross in the Lossnay core.
OA
(outside air)
Humidity does not
penetrate easily.
Page 121
72%
Hyper Eco Element
Spacerplates
RX5
73%
RA
(return air)
Hyper Element
Humidity penetration is
facilitated.
71%
70%
69%
68%
Improved adhesive
agent material
67%
66%
Dividerplates
Adhesive agent
with low humidity
penetration rate
Indoor unit
Latent heat
Humidity
65%
New adhesive agent
with high humidity
penetration rate
64%
15RX
Type
25RX
Type
35RX
Type
50RX
Type
65RX
Type
80RX
Type
100RX 150RX 200RX
Type
Type
Type
Indoor unit
Page 122
RX5 SERIES
Why LOSSNAY is necessary.
Extra Low Mode
Additional energy conservation by using a
four-level air volume system that allows
more precise control.
• Without ventilation...
Lack of Ventilation makes people sick by dirty indoor air including CO2, Dust, Bacteria.
• If just opening windows...
In addition to the conventional Extra High, High, and Low
modes, an Extra Low mode is added to provide a more
dynamic range of air volume settings and versatility in a
variety of installation environments, yielding much better
energy conservation. Using a simplified timer function, it
switches to Extra Low operation when the operation stop
button is activated and it is accordingly possible to
implement 24-hour energy conservation ventilation.
Opening windows eliminates dirty air BUT wastes much air-con energy.
• So we recommend LOSSNAY
LOSSNAY is simultaneous pursuit of Ventilation and Energy Saving.
Ventilation
Energy Save
A)
Extra Low
Low
High
B)
Extra Low
Low
Extra High
* The Extra High and High ventilation modes are selectable by the initial
setting.
* Extra-Low not equipped LGH-150RX 5 and 200RX5.
* The ventilation mode is actually selected in three levels, and the remote
controller also displays these three levels.
• This is LOSSNAY !
ADVANTAGES
Clean air supply, dirty air exhaust by Two air paths (OA SA and RA EA)
Energy recovery by LOSSNAY Core
Free cooling by bypass damper
MULTI VENTILATION MODE for multi ventilation request (Power supply, Power supply/exhaust, Power exhaust)
UNIT STRUCTURE
Energy Recovery Image
EA (exhaust air)
current RX4 series with PZ-41SLB controller
8:00
Bypass damper
Air conditioner
Thermal
energy
RA (return air)
Outdoor:0°C Indoor:20°C
new RX5 series with PZ-60DR-E
8:00
high
12:00
13:00
low
17:00
high
19:00
low
Tolal power consumption in one day : LGH-100RX4-E : 6,600W (14 hours)
LGH-100RX5-E : 5,390W (14 hours)
Monday
to
Thursday
SA temp. : 16°C
(Indoor 20°C)
Friday
Saturday
to
Sunday
Page 123
9:00
low
22:00
extra low
1,210W (18%) less
Example B (Weekly)
SA (supply air)
How much recovery?
OA temp. : 0°C
22:00
high
16°C
Indoor unit
timer
Air volume level can be set hourly (max 8 times) and weekly. You can pre-set air volume according to the predictable
requirement so that LOSSNAY can automatically operate at only necessary air-speed at the specified time period, which
saves power consumption while maintaining the indoor air quality. Besides, once the weekly timer has been set, no
switching on-off is required.
Example A (Hourly)
LOSSNAY Core
OA (outside air)
Energy Saving by
8:00
9:00
low
8:00
12:00
high
9:00
low
12:00
high
13:00
low
17:00
high
13:00
low
19:00
low
17:00
high
8:00
22:00
extra low
22:00
extra low
22:00
extra low
Indoor unit
Page 124
Model line up
New function: "By-pass" Ventilation External Control Setting
In addition to the automatic damper open/close function,
open/close control via external devices is now possible,
delivering a “By-pass” ventilation system that is suitable
to the installed environment.
"By-pass" operation
Control devices (example)
· Humidity sensor
· Timers
Exhaust air
Return air
Establish the wire connection by inserting the optional
remote display adaptor (PAC-SA88HA-E) in the connector
CN16 (Ventilation mode selector).
•Automatic ventilation setting
1. Reduces cooling load
I f t h e a i r o u t s i d e i s c o o l e r th a n th e a i r i n s i d e th e
building during the cooling season (such as early
morning or at night), “By-pass” ventilation will draw
in the cooler outside air and reduce the cooling load
on the system.
New Remote Controller PZ-60DR-E
LOSSNAY core
Remote display adaptor
(Optional) PAC-SA88HA-E
Brown 1
Red 2
LOSSNAY
control board
CN16
Yellow 4
SW1: By-pass ventilation operation switch
(When closed: For By-pass ventilation operation)
Green 5
LOSSNAY ventilation
Fan speed/
entilation
mode selection
Not used. Insulate completely
Max wiring length 10 m
2. Night purge
“By-pass” ventilation can be used to release hot air
from inside the building that has accumulated in
buildings a business district during the hot summer
season.
3. Office equipment room cooling
During cold season, fresh air can be drawn in and
used as is to cool rooms where the temperature has
risen due to the use of office equipment.
Extra High
High
Low
Extra Low
Extra High
High
Low
Extra Low
Current (A)
0.44-0.46
0.37-0.38
0.25-0.25
0.14-0.15
0.45-0.46
0.37-0.38
0.25-0.26
0.14-0.15
96-110
80-90
53-59
30-35
97-110
81-91
54-61
30-35
(m3/h)
150
150
110
70
150
150
110
70
(L/s)
42
42
31
19
42
42
31
19
(mmH2O)
10.2-10.7
6.6-7.1
3.6-4.1
1.4
10.2-10.7
6.6-7.1
3.6-4.1
1.4
(Pa)
100-105
65-70
35-40
14
100-105
65-70
35-40
14
82.0
82.0
84.0
85.5
Heating
75.0
75.0
77.5
81.0
Cooling
73.0
73.0
76.5
81.0
27.5-28
26.5-27
22-23.5
18
28.5-29
27-28
23-24
18-19
Air volume
External static pressure
Enthalpy exchange efficiency (%)
Noise (dB)
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
Weight (kg)
20
Under 0.8 A Less
Return button
Timer MENU (MONITOR/SET) button
Set time buttons Back Ahead
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 6 dB greater than the indicated value. (at High Fan speed)
LGH-25RX5-E
LGH-25RX5-E
Model
Frequency / Power source
50Hz / Single phase 220-240V
LOSSNAY ventilation
By-pass ventilation
Ventilation mode
Fan speed
Extra High
High
Low
Extra Low
Extra High
High
Low
Extra Low
Current (A)
0.52-0.55
0.47-0.48
0.26-0.27
0.17-0.18
0.53-0.55
0.47-0.48
0.26-0.27
0.17-0.18
Power consumption (W)
113-129
102-114
56-62
36-42
115-131
103-115
56-63
36-42
(m3/h)
250
250
155
105
250
250
155
105
(L/s)
69
69
43
29
69
69
43
29
(mmH2O)
8.2-8.7
5.1-6.1
2-2.5
0.9
8.2-8.7
5.1-6.1
2-2.5
0.9
(Pa)
80-85
50-60
20-25
9
80-85
50-60
20-25
9
79.0
79.0
81.5
83.5
Heating
69.5
69.5
74.0
77.5
Cooling
68.0
68.0
72.5
76.0
26-27
25-26
20-21.5
18-19
26.5-27.5
25.5-26.5
20.5-22
18-19
Air volume
External static pressure
Temperature exchange efficiency (%)
* When the outdoor air tempereture drops lower than 8°C it changes to the heat
exchange ventilation. (Display of the remote controller does not change.)
* In the case of “By-pass” ventilation, the supply air temperature slightly rises more
than the outside air temperature because of the heat effect around the ducts or the
unit motors.
By-pass ventilation
Ventilation mode
Fan speed
Temperature exchange efficiency (%)
Orange 3
SW1
50Hz / Single phase 220-240V
Power consumption (W)
Enthalpy exchange efficiency (%)
Noise (dB)
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
Weight (kg)
20
Under 0.9 A Less
Starting current
*The Air outlets noise (45 angle,1.5 meters in front of the unit) is about 10 dB greater than the indicated value. (at High Fan speed)
A new remote controller for the RX5 series is now available. In addition to boosting the energy conservation performance of the main unit, the remote controller features a variety of new functions which also pursue additional energy
conservation.
The appearance of the remote controller conforms to Mitsubishi air conditioner interface design standards.
Functions that were set using DipSwitch on the LOSSNAY main unit
can now be configured as needed
Dot matrix display
using the new remote controller.
This eliminates the need to crawl
under the eaves to change operation
settings.
Also, a newly adopted dot matrix
ON/OFF button
display provides much more informaFan speed Adjustment button
tion, making it easy to check mainteButton
CLEAR button
nance indications, operation status
FILTER button
display, and explanations required
"Extra Low" fan speed button
when configuring settings.
OPERATION button
Page 125
LGH-15RX5-E
Frequency / Power source
Starting current
The automatic damper mode automatically provides
the correct ventilation for the conditions in the room.
The following shows the effect “By-pass” ventilation will
have under various conditions.
Indoor unit
LGH-15RX5-E
Model
Supply air
Fresh air
With SW1 is “ON”, the ventilation mode of LOSSNAY is
changed to the By-pass ventilation regardless of the
setting on the remote controller.
Specification
Damper
· Temperature sensor
LGH-15~100RX5-E
OPERATION buttons
Back Ahead
LGH-35RX5-E
LGH-35RX5-E
Model
Frequency / Power source
50Hz / Single phase 220-240V
LOSSNAY ventilation
By-pass ventilation
Ventilation mode
Fan speed
Extra High
High
Low
Extra Low
Extra High
High
Low
Extra Low
Current (A)
0.92-0.92
0.74-0.74
0.5-0.51
0.28-0.3
0.93-0.94
0.77-0.77
0.51-0.52
0.28-0.3
Power consumption (W)
195-212
160-169
105-116
58-69
197-217
164-173
105-116
58-69
(m3/h)
350
350
210
115
350
350
210
115
(L/s)
97
97
58
32
97
97
58
32
(mmH2O)
15.8-16.3
7.6-8.2
2.5-3.1
0.9
15.8-16.3
7.6-8.2
2.5-3.1
0.9
(Pa)
155-160
75-80
25-30
9
155-160
75-80
25-30
9
80.0
80.0
85.0
88.0
Heating
71.5
71.5
76.5
81.5
Cooling
71.0
71.0
75.5
81.0
32-32
28.5-29.5
21.5-23
18
32.5-32.5
29.5-30.5
21.5-24
18
Air volume
External static pressure
Temperature exchange efficiency (%)
Enthalpy exchange efficiency (%)
Noise (dB)
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
Weight (kg)
Starting current
29
Under 2.4 A Less
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 10 dB greater than the indicated value. (at High Fan speed)
Function selector button
Timer ON/OFF (DAY) button
Indoor unit
Page 126
LGH-15~100RX5-E
LGH-15~100RX5-E
LGH-50RX5-E
LGH-100RX5-E
LGH-50RX5-E
Model
Frequency / Power source
LOSSNAY ventilation
Frequency / Power source
By-pass ventilation
Extra High
High
Low
Extra Low
Extra High
High
Low
Extra Low
Current (A)
1.2-1.25
1.0-1.0
0.85-0.85
0.4-0.4
1.25-1.25
1.0-1.0
0.85-0.85
0.4-0.4
Power consumption (W)
255-286
207-228
175-190
80-95
260-290
210-230
180-195
80-95
(m3/h)
500
500
390
180
500
500
390
180
(L/s)
139
139
108
50
139
139
108
50
(mmH2O)
15.3-15.8
6.6-9.2
4.1-6.1
1.0
15.3-15.8
6.6-9.2
4.1-6.1
1.0
(Pa)
150-155
65-90
40-60
10
150-155
65-90
40-60
10
78.0
78.0
81.0
86.0
Heating
69.0
69.0
71.0
78.0
Cooling
66.5
66.5
68.0
77.0
33-34
30.5-32
26.5-28
19
Air volume
Temperature exchange efficiency (%)
Enthalpy exchange efficiency (%)
(Measured at 1.5m under the center
Noise (dB)
of panel in an anechoeic chamber)
Weight (kg)
50Hz / Single phase 220-240V
LOSSNAY ventilation
Ventilation mode
Fan speed
High
Low
Extra Low
Extra High
High
Low
Current (A)
2.3-2.4
2.1-2.1
1.7-1.7
0.9-0.9
2.3-2.4
2.1-2.1
1.7-1.7
0.9-0.9
Power consumption (W)
500-535
445-475
350-380
175-200
510-550
460-485
365-395
175-200
(m3/h)
1000
1000
755
415
1000
1000
755
415
(L/s)
278
278
210
115
278
278
210
115
(mmH2O)
16.3-17.3
10.2-11.2
5.6-6.1
1.8
16.3-17.3
10.2-11.2
5.6-6.1
1.8
(Pa)
160-170
100-110
55-60
18
160-170
100-110
55-60
18
80.0
80.0
83.0
87.0
Heating
72.5
72.5
74.0
80.0
Cooling
71.0
71.0
73.0
79.0
36-37
34-35
31-32.5
21-22
37-38
35-36
32-33
21-22
Air volume
External static pressure
Enthalpy exchange efficiency (%)
34-35
31-32.5
27-29
19
By-pass ventilation
Extra High
Temperature exchange efficiency (%)
32
Under 3.0 A Less
Starting current
LGH-100RX5-E
Model
50Hz / Single phase 220-240V
Ventilation mode
Fan speed
External static pressure
LGH-150/200RX5-E
Noise (dB)
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
Weight (kg)
59
Under 4.6 A Less
Starting current
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 16 dB greater than the indicated value. (at High Fan speed)
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 17 dB greater than the indicated value. (at High Fan speed)
LGH-65RX5-E
LGH-150RX5-E
LGH-65RX5-E
Model
Frequency / Power source
LOSSNAY ventilation
Ventilation mode
Fan speed
Current (A)
Power consumption (W)
External static pressure
Noise (dB)
By-pass ventilation
High
Low
Extra Low
Extra High
High
Low
Extra Low
1.7-1.8
1.5-1.5
1.2-1.2
0.6-0.6
1.7-1.8
1.5-1.5
1.2-1.2
0.6-0.6
Current (A)
Power consumption (W)
308-322
248-265
120-140
350-385
310-335
250-265
120-140
650
650
520
265
650
650
520
265
(L/s)
181
181
144
74
181
181
144
74
(mmH2O)
11.2-12.2
6.1-8.2
4.1-5.1
0.8
11.2-12.2
6.1-8.2
4.1-5.1
0.8
(Pa)
110-120
60-80
40-50
8
110-120
60-80
40-50
8
77.0
77.0
80.0
86.0
Heating
68.5
68.5
70.5
78.0
Cooling
66.0
66.0
68.5
77.0
34-34.5
32-33
28.5-31.5
22
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
External static pressure
32.5-33.5
28.5-30.5
22-22.5
Noise (dB)
By-pass ventilation
Extra High
High
Low
Extra High
High
Low
3.5-3.5
3.2-3.2
2.9-2.9
3.5-3.5
3.2-3.2
2.9-2.9
760-830
690-740
630-680
765-835
695-745
635-685
(m3/h)
1500
1500
1300
1500
1500
1300
(L/s)
417
417
361
417
417
361
(mmH2O)
16.3-17.8
13.3-13.8
9.7-10.2
16.3-17.8
13.3-13.8
9.7-10.2
(Pa)
160-175
130-135
95-100
160-175
130-135
95-100
80.0
80.0
81.0
Heating
72.0
72.0
72.5
Cooling
70.5
70.5
71.5
38-39
36-37.5
33.5-35
39-40.5
37.5-39
35.5-37
Air volume
Enthalpy exchange efficiency (%)
40
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
Weight (kg)
Under 4.4 A Less
Starting current
LOSSNAY ventilation
Temperature exchange efficiency (%)
34.5-35
Weight (kg)
50Hz / Single phase 220-240V
Ventilation mode
Fan speed
Extra High
350-380
Temperature exchange efficiency (%)
Enthalpy exchange efficiency (%)
Frequency / Power source
(m3/h)
Air volume
LGH-150RX5-E
Model
50Hz / Single phase 220-240V
105
Under 7.3 A Less
Starting current
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 10 dB greater than the indicated value. (at High Fan speed)
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 19 dB greater than the indicated value. (at High Fan speed)
LGH-80RX5-E
LGH-200RX5-E
LGH-80RX5-E
Model
Frequency / Power source
LOSSNAY ventilation
By-pass ventilation
Extra High
High
Low
Extra Low
Extra High
High
Low
Extra Low
Current (A)
1.75-1.75
1.6-1.6
1.45-1.45
0.60-0.65
1.75-1.75
1.6-1.6
1.45-1.45
0.60-0.65
380-415
345-370
315-340
125-145
380-415
345-370
315-340
120-145
(m3/h)
800
800
700
355
800
800
700
355
(L/s)
222
222
194
99
222
222
194
99
(mmH2O)
14.8-15.3
10.7-12.2
8.2-9.7
2
14.8-15.3
10.7-12.2
8.2-9.7
2
(Pa)
145-150
105-120
80-95
20
145-150
105-120
80-95
20
79.0
79.0
80.5
87.5
Heating
71.0
71.0
72.5
79.5
Cooling
70.0
70.0
71.5
79.5
33.5-34.5
32-33
30-31
22
Air volume
External static pressure
Temperature exchange efficiency (%)
Enthalpy exchange efficiency (%)
Noise (dB)
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
Weight (kg)
Indoor unit
50Hz / Single phase 220-240V
LOSSNAY ventilation
Ventilation mode
Fan speed
Current (A)
Power consumption (W)
Enthalpy exchange efficiency (%)
34.5-35.5
53
33-34
31-32
22
Noise (dB)
Starting current
Low
Extra High
High
Low
4.8-4.8
4.2-4.2
3.4-3.4
4.8-4.8
4.2-4.2
3.4-3.4
910-980
715-785
1040-1110
915-980
720-785
2000
2000
1580
2000
2000
1580
(L/s)
556
556
439
556
556
439
(mmH2O)
16.3-16.8
10.2-10.7
6.1-6.6
16.3-16.8
10.2-10.7
6.1-6.6
(Pa)
160-165
100-105
60-65
160-165
100-105
60-65
80.0
80.0
83.0
Heating
72.5
72.5
73.5
Cooling
71.0
71.0
72.0
39.5-40
37-38
32.5-34
40.5-41
38-39
33.5-35
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
Weight (kg)
High
1035-1100
Air volume
External static pressure
By-pass ventilation
Extra High
(m3/h)
Temperature exchange efficiency (%)
Under 3.8 A Less
Starting current
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 16 dB greater than the indicated value. (at High Fan speed)
Page 127
Frequency / Power source
Ventilation mode
Fan speed
Power consumption (W)
LGH-200RX5-E
Model
50Hz / Single phase 220-240V
Extra Low
118
Under 11.9A Less
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 20 dB greater than the indicated value. (at High Fan speed)
Indoor unit
Page 128
VL-100U-E
Control
Heat Recovery Ventilators for Residential Use
The New Remote Controller PZ-60DR-E enable simple control setting
Time Spent in Comfort with a Breath of Fresh Air
Interlocked with Air conditioners
Interlocked with CITY MULTI
M-NET transmission line
Slim-LOSSNAY connection cable
LOSSNAY
RX5
Mr.Slim
LOSSNAY RX5
(Max 15 unit)
LOSSNAY remote
controller
PZ-60DR-E
The LOSSNAY remote controller (PZ-60DR-E,
PZ-41SLB-E) can not be used with this system.
PZ-41SLB-E can be connected however function
is limited.
SA
Easy Installation
through boring
of 2 installation
holes.
EA
operation
in Summer
operation
in Winter
Outdoor unit
O
Network remote
controller
20°C
LOSSNAY RX5
}
•Heat-exchange calculating equation
{
temp exchange
x
efficiency (㧑)
}
Indoor supply-air Outdoor
Outdoor
Indoor
temp exchange
−
−
x
=
temperature (°C) temperature (°C) temperature (°C) temperature (°C)
efficiency (㧑)
(Low notch)
Calculation example : 24.2°C = 35°C - (35°C - 21°C) x 77㧑
(Low notch)
LOSSNAY RX5
LOSSNAY remote
controller
PZ-60DR-E
•Simple installation through boring of 2 installation holes.
•Low-noise(Less than 30dB at low notch).
•1-motor 2-fan system.
•Air-volume:low/high 2-notch.
•Air-supply/exhaust pipes and plastic weather cover are
supplied as accessories.
•Equipped with an outdoor-air shutter. •Pull-string switch
Supply Power line
Temp.exchange
Power
Air volume
Noise Weight
Voltage frequency Notch
efficiency
Consumption
(m3/h)
(kg)
(dB)
(V)
(Hz)
(%)
(W)
220-240
50
220
60
HI
105
26
70
39
LO
65
23
77
29.5
HI
90
26
73
37
LO
50
21
80
26
6.5
Optional parts
Ext. signal source
• Total length when connected
to the pipe extension
coupling is 300mm.
280
(unit: mm)
Extension Pipe Coupling
P-100PJ
60
20 20
• Screw-in method
M75
ø70
Extension Pipe
P-100P
ø79
LOSSNAY remote
controller
PZ-60DR-E
{
Indoor
Outdoor
−
temperature (°C) temperature (°C)
Fresh hot air
(outdoor air)
Specification
Interlocked with
external devices
LOSSNAY RX5
Indoor supply-air
Outdoor
=
+
temperature (°C)
temperature (°C)
35°C
Stale cool air
(indoor air)
Fresh cool air
(outdoor air)
•Heat-exchange calculating equation
Calculation example : 15.4°C = 0°C + (20°C - 0°C) x 77㧑
LOSSNAY units only
LOSSNAY remote
controller
PZ-60DR-E
(exhasut)
21°C
0°C
Stale warm air
(indoor air)
Mr.Slim
remote controller
LOSSNAY RX5
31.8
°C
Stale cool air
Fresh cool air
(indoor supply air)
Indoor unit
LOSSNAY remote
controller
PZ-60DR-E
Mr.Slim
indoor unit
24.2°C
4.6°C
Stale hot air
(exhasut)
ø75
Mr.Slim
outdoor unit
15.4°C
Fresh warm air
(indoor supply air)
Inner diameter ø70
Network remote
controller
LOSSNAY RX5
Interlocked with
Mr. Slim indoor units
Page 129
Simple
Installation
Total-Heat-Exchange Concept
Indoor unit
Indoor unit
OA
Simultaneous air
supply/exhaust
function ensures that
air stays fresh
with efficient
ventilation.
Interlocked with
CITY MULTI indoor units
Power supply unit
(PAC-SC51KUA)
Super sound
insulation
and quiet
operation.
Fresh Air
Centralized Controller System
Centralized controller
AG-150A
Reduced heat loss
contributes to
lower air
conditioning
costs.
LOSSNAY
RX5
LOSSNAY remote
controller
PZ-60DR-E
can be connected
PZ-52SF-E can be used insted of PZ-60DR-E,
However, function is limited and connecting
position is different.
Quiet
Operation
RA
Energy Saving
Outer diameter ø75
City Multi
LOSSNAY independent
Interlocked with Mr.Slim
(unit: mm)
Indoor unit
Page 130
OA Processing
Units
RDH3 SERIES
OUTDOOR AIR PROCESSING UNIT GUF type
General
Ideal Indoor-Air Quality — For Your Comfort and Health
The OA (outdoor-air) Processing Unit creates an optimum indoor-air environment at an unparalleled rate of cost
efficiency providing substantial energy savings. Forced air ventilating and humidifying functions unique to this system
keep indoor-air fresh and free of contaminants preventing “sick building syndrome” and the spread of airborne viruses
such as the flu. Another novel feature of the OA Processing Unit is the “Lossnay core,” a heat-exchange unit that
functions to transfer heat efficiently, cutting ventilation load by as much as 70%. This special combination of functionality
and performance designed to ensure users ample comfort and year-round health which cannot be found anywhere else
on the market.
GUF - For the finest indoor quality
GUF = [ LOSSNAY ] + [ HEATING & COOLING ]
DX Coil(Heating & Cooling)
GUF model image
Specification
Model
OA (Outdoor air)
Fresh, outdoor-air in a quantity
required for ventilation is drawn
in by the supply fan.
EA (Exhaust air)
Heat from the indoor air (both sensible
and latent) is recovered by the Lossnay
Core and vented outside by the
exhaust fan.
The exhaust fan
High efficiency filters (Option)
The supply fan
RA (Return air)
The exhaust
fan draws in
contaminated
indoor-air.
Heat recovery unit
(Lossnay Core)
Temperature and humidity are
exchanged between the supply
air and the exhaust air.
Maintenance cover
Air filter
Prevents clogs in
the Lossnay Core.
DX Heat exchanger
Cools or heats the drawn
in outdoor-air.
SA (Supply air)
The processed, fresh
outdoor-air is vented
to the indoor rooms.
GUF-50RD(H)3 *1
Cooling Capacity
5.46 (DX coil:3.63, Lossnay:1.83)KW
Heating capacity
6.18 (DX coil:4.17, Lossnay:2.01)KW
500m3/h Single phase 220-240V 50Hz
GUF-100RD(H)3 *1
Cooling Capacity
11.17 (DX coil:7.32, Lossnay3.85)KW
Heating capacity
12.50 (DX coil:8.30, Lossnay:4.20)KW
1000m3/h Single phase 220-240V 50Hz
*1 H : Humidifying Type
Comfortable Level of Humidity for Exceptionable
Air Quality
The OA Processing Unit is equipped with a new permeable film humidifier
developed and patented by Mitsubishi Electric. Steam transmission efficiency
has been improved remarkably by lowering the resistance of the material. The
use of a 3-layer film that allows only the transfer of steam prevents the
production of white powder, so there is no need for the use of a water purifier.
Highly Efficient Humidification
Improvements in the system of airflow patterns and water injection techniques
have resulted in a substantial increase in humidifying volume.
Outdoor
air
Water
Ultra-water
repellant
cell-based
water-vapor
transmission
filter
Steam
*2
*2
*2
kW
kcal / h
BTU / h
W
A
kW
kcal / h
BTU / h
W
A
Sound pressure level (Low-High)
(measured in anechoic room)
Insulation material
Air filter
Supplying air
Exhausting air
Protection device
Refrigerant control device
Diameter of
Liquid
refrigerant pipe Gas
Diameter of drain pipe
GUF-100RDH3 *3
GUF-50RD3
1-phase 220-240V 50Hz, 1-phase 220V 60Hz
11.17
<3.85>
<1.83>
5.46
9,600
<3,300>
<1,600>
4,700
38,100
<13,100>
<6,200>
18,600
235-265
480-505
1.15
2.20
12.50
<4.20>
<2.01>
6.18
10,800
<3,600>
<1,700>
5,300
42,700
<14,300>
<6,900>
21,100
235-265
480-505
1.15
2.20
P32
P63
5.4
12.0
GUF-100RD3
kg / h
lbs / h
<1.83>
5.46
<1,600>
4,700
<6,200>
18,600
235-265
1.15
<2.01>
6.18
<1,700>
5,300
<6,900>
21,100
235-265
1.15
P32
2.7
6.0
mm
in.
kg (lbs)
Permeable film humidifier
Galvanized, with grey insulation sheet
398 x 1,231 x 1,580
317 x 1,016 x 1,288
317 x 1,016 x 1,288
398 x 1,231 x 1,580
15-11/16 x 48-1/2 x 62-1/4
12-1/2 x 40 x 50-3/4
12-1/2 x 40 x 50-3/4
15-11/16 x 48-1/2 x 62-1/4
92 (203)
57 (126)
54 (120)
98 (217)
Pa
mmH2O
125
12.7
Partition, Cross-flow structure, Special preserved paper-plate.
Cross fin (Aluminum fin and copper tube)
SA: Centrifugal fan (Sirocco fan) x 1
EA: Centrifugal fan (Sirocco fan) x 1
140
135
14.3
13.8
kW
Totally enclosed capacitor permanent split-phase induction motor, 4 poles, 2units
-
LOSSNAY core
Refrigerant coil
Type x Quantity
External
static press.
Motor type
Motor output
Driving mechanism
Airflow rate
(High value)
Spacer
3-dimensional
cloth
*1
*1
*1
Humidifier
External finish
External dimension H x W x D
Ultra-water
repellant
cell-based
water-vapor
transmission
filter
New filter
Page 131
Power source
Cooling capacity
Figure in < > is the recovery
capacity by LOSSNAY core.
Power input
Current input
Heating capacity
Figure in < > is the recovery
capacity by LOSSNAY core.
Power input
Current input
Capacity equivalent to indoor unit
Humidifying capacity
Humidified air
Water
Indoor unit
GUF-50RDH3 *3
Net weight
Heat
exchanger
FAN
New Permeable Film Humidifier (RDH3 model)
Lossnay (Energy Recover)
m3 / h
L/s
cfm
dB <A>
500
139
294
33.5-34.5
Direct-driven by motor
500
1,000
139
139
294
589
38-39
33.5-34.5
<3.85>
11.17
<3,300>
9,600
<13,100>
38,100
480-505
2.20
<4.20>
12.50
<3,600>
10,800
<14,300>
42,700
480-505
2.20
P63
-
140
14.3
1,000
139
589
38-39
Polyester sheet
Non-woven fabrics filter (Gravitational method 82%) & Optional part: High efficiency filter (Colorimetric method 65%)
Non-woven fabrics filter (Gravitational method 82%)
Fuse
LEV
mm (in.)
ø9.52 (ø3/8) Flare
ø6.35 (ø1/4) Flare
ø6.35 (ø1/4) Flare
ø9.52 (ø3/8) Flare
mm (in.)
ø15.88 (ø5/8) Flare
ø12.7 (ø1/2) Flare
ø12.7 (ø1/2) Flare
ø15.88 (ø5/8) Flare
mm (in.)
VP25
Notes:
*1
Cooling : Indoor 27°CDB/19°CWB, Outdoor 35°CDB/24°CWB
*2
Heating : Indoor 20°CDB/13.8°CWB, Outdoor 7°CDB/16°CWB
*3
Available for limited countries. Please contact your local distributor for further information.
Indoor unit
Page 132
The importance of control
The need for control is paramount in order
to optimise the performance of any air
conditioning system and minimize its
running costs. Mitsubishi Electric offers a
wide range of control options designed to
meet such needs.
Operating an air conditioning system without
the right control can prove costly. It's therefore
important to ensure that every system is
correctly specified to the degree of control it
requires. Mitsubishi Electric have a wide range
of controls available 'off-the-shelf' and
individual control systems can be specifically
designed to match.
R emote Controller
Individual Remote Controller
Centralized Remote Controller
Good controls will benefit any application,
large or small. Air conditioning products need
to react to a variety of factors: different room
sizes, usage and staff levels; changes in the
climate; electronic equipment and lighting ...the
list goes on. So whatever the application,
optimum control of air conditioning systems is
essential and will result in a constant,
comfortable environment, which in turn is both
energy and cost efficient.
A degree of difference
When an air conditioning system is not
properly controlled, it will not run as efficiently
as it should. For every degree that the system
deviates from the required temperature,
energy costs can rise by up to 5%. Specify one
of the many control options from Mitsubishi
Electric to ensure air conditioning works as
intended, whilst giving the optimum amount of
control.
The simpler, the better
With the array of comprehensive control
systems available from Mitsubishi Electric, it
becomes simple to design and install air
conditioning systems. From a simple
hand-held controller to a AG-150A system you are in control.
Remote Controller
Page 133
Page 134
System Controller
MITSUBISHI ELECTRIC's Air-conditioner Network System (MELANS) leads air conditioner management a PC
browser and Network era.
MELANS
Use of our MELANS products enhances EFFICIENCY and QUALITY of air-conditioning, contributing to
ENERGY SAVING and reduction in running cost. We offer a wide variety of MELANS products to meet all
requirements - from the smallest and simplest to the largest and most complex.
We have individual remote controllers, various centralized controllers, and centralized integrated software, as
well as BMS interface hardware and software etc. Above all, with AG-150A/GB-50ADA-J, PC browser and long
distance remote control (monitoring and operating) via communication Network is possible and easy.
I
ndividual Remote Controller
All of the local remote controllers feature liquid
crystal and LED displays and easy to operate.
NEW
Remote
Controller
Simple
Remote
Controller
C entralized Remote Controller
Wireless
Remote
Controller
Advanced
Touch
Controller
AT-50A
ON/OFF
Remote Controller
PAC-YT40ANRA
PAR-31MAAE
NEW
PAC-YT52CRA
M-NET
PAR-FL32MA PAR-FA32MA
AG-150A
PAC-YG50ECA
EB-50GU-J
GB-50ADA-J
PAR-21MAA
AHC ADAPTER
NEW
PAR-U02MEDA
PAC-SE51CRA
PAR-SA9FA-E
PAR-SL94B-E
*1
PAC-IF01AHC-J
PI Controller
PAR-F27MEA
PAC-YG60MCA
DIDO Controller
OUTDOOR UNIT
S : PUMY
Y : PUCY/PUHY
INDOOR UNIT
PEFY
PMFY
PLFY
PCFY
PKFY
PFFY
PAC-YG66DCA
AI Controller
PAC-YG63MCA
Interface
BAC-HD150
BACnet
transmission line
(Ethernet)
*1. Advanced HVAC CONTROLLER
Interface
A ir-Conditioning
LMAP04-E
Control System
This is a specialized air conditioning management system, in which
up to 2000 indoor units can be
centrally controlled.
LONWORKS
transmission line
MITSUBISHI ELECTRIC's
CITY MULTI can be easily
connected to the building
managementsystem through
BACnet .
Integrated centralized
control software
TG-2000A
Integrated Communications Control with
Mitsubishi Electric's Unique Transmission Network (M-NET)
Model
PAR31MAAE
Local remote controller
System controller
*10
PARPARPARPACPACPARPAC21MAA U02MEDA F27MEA YT52CRA SE51CRA FL32MA YT40ANRA
AT-50A
AG-150A
AG-150A +
PAC-YG50ECA
EB-50GU-J
*10
GB-50ADA-J
*4 *5
TG-2000A
50 / 50
150 / 150
50 / 50
50 / 50
Controllable Groups / Indoors 1 / 16 1 / 16 1 / 16 1 / 16 1 / 16 1 / 16 1 / 16 16 / 50 50 / 50
2000 / 2000
(Group / Indoor)
*9
AG-150A Browser*4 AG-150A Browser*4 EB-50GU-J Browser*4 GB-50ADA-J Browser*4
■Operating
ON / OFF
Mode (cool / heat / dry / fan)
N
N
N
N
Temperature-set
N
N
N
N
N
N
N
N
N
N
N
Local Permit / Prohibit
N
N
Fan speed
N
N
N
N
N
Air-flow direction
N
N
■Status monitoring
ON / OFF
N
Mode (cool / heat / dry / fan)
N
N
N
Temperature-set
N
N
Local Permit / Prohibit
N
N
N
Fan speed
N
N
N
N
N
Air-flow direction
N
N
N
N
N
N
Indoor temperature
N
N
N
N
N
N
Filter sign
Error flashing
N
N
Error code
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Operation hour
■Scheduling
One-day
N
N
N
N
N
N
Times of ON / OFF per day
1
8
1
1/1
N
1/1
N
16
N
N
24
24
24
24
24
24
24
N
( )
( ) ( ) ( ) N
( )
( ) N
( )
Weekly
N
N
N
N
N
Times of ON / OFF per week 8 x 7 8 x 7 8 x 7
N
N
N
N
16 x 7 24 x 7 24 x 7 24 x 7 24 x 7 N 24 x 7 N 24 x 7
24 x 7
N
Annual
N
N
N
N
N
N
N
N
N
N
N
Optimized start-up
N
N
N
N
N
N
N
N
N
N
N
Auto-off timer
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Min. timer setting unit (minute)
N
10
N
5
N
N
1
1
1
1
1
1
1
5
1
5
10
N
■Recording
Error record
N
N
N
N
N
N
N
N
N
Daily / monthly report
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Electricity charge
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Energy management data
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
■Other
Temp-set limitation by Local R / C
N
N
N
N
N
N
N
N
N
N
N
N
N
*7
*6
*6
*6
*6
*2 *6
*2 *6
*2 *6
*2 *6
*6
Temp-set limitation by System controller *4
N
N
N
N
N
N
Operation-lock
N
N
N
N
N
N
N
N
N
N
N
N
*2
*2
*2
*2
Night setback
N
N
N
N
N
N
N
N
*2
*2
*2
*2
Sliding temperature control
N
N
N
N
N
N
N
N
N
N
N
■Management (Group / Interlocked)
*2
*2
*2
*2
N/
Ventilation interlock
N/
N/
N/
N/
N/
/
/
/
/
/
N
N
N
*1
*1
*1
*2
*2
*2
*2
Group setting
N
N
N
*2
*2
*2
*2
Block setting
N
N
N
N
N
N
N
N
N
N
N
Revision of electricity charge
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
■Operating on LOSSNAY interlocked (Group / Interlocked)
*8
ON / OFF
N/
N/
N/
N/
N/
N/
N/
/
/
/
/
/
/
/
/
/
/
/ *3
Fan speed
N/
N/
N
N
N
N
N/N /
/
/
/
/
/ N/N /
/
N/
N/
Ventilation mode
N
N
N
N
N
N/N N/N
/N
/N /N /N /NN/N
/NN/N
/N
/N
N
■Status monitoring on LOSSNAY interlocked (Group / Interlocked)
ON / OFF
N/
N
N
N
N/
/
/
/
/
/
/
/
/
/
/
N/
N/
N/
Fan speed
N/
N/
N
N
N
N
/
/
/
/
/ N/N /
N/N /
/
N/
N/
Ventilation mode
N
N
N
N
N
N
N
N
/N
/N /N /N /NN/N
/NN/N
/N
/N
: Each group / Batched ;
: Each group ;
: Block (for CITY MULTI Indoor unit, not for all Mr.SLIM) ;
: AG-150A/GB-50ADA-J/EB-50GU-J license registration possible.
( ) : License registration for the optional functions required
N : Not Available (Not Used.)
: Batched only ;
: Batched handling (for maintenance)
: Block
*1.
*2.
*3.
*4.
*5.
Group setting via wiring between Indoor units with cross-over cable;
Installation possible at Initial setting web browser;
Inter-lock is set at Local remote controller.
AG-150A/EB-50GU-J/GB-50ADA-J license registration to AG-150A/EB-50GU-J/GB-50ADA-J is required to monitor and operate the units by browser and TG-2000A.
AG-150A connected with PAC-YG50ECA is compatible with TG-2000A Ver.6.1* or later. GB-50ADA-J is compatible with TG-2000A Ver. 6.3* or later. EB-50GU-J is
compatible with TG-2000A Ver. 6.40A or later.
*6. This function can be set only on the ME/Simple ME remote controller. This function cannot be used with the MA/Simple MA remote controller.
(But, the validity of this function with the MA/Simple MA remote controller depends on the indoor unit model, and there are possibilities that this function can be used with them.)
*7. This function is available only when applying together with TG-2000A, AG-150A, GB-50ADA-J, and EB-50GU-J.
*8. Inter-lock is set from system controller. (Except PAC-YT40ANRA)
*9. The maximum number of controllable units decreases depending on the indoor unit model.
*10. For indoor use only.
LONWORKS
Ethernet
Integrated centralized
control software TG-2000A
*Some controllers cannot be used in combination with certain models of devices.
Remote Controller
Page 135
Remote Controller
Page 136
Individual
Remote Controller
Wired MA remote controller PAR-21MAA
Wired MA remote controller PAR-31MAAE
• Set temperature in 1°C/°F increment
• Weekly timer
Up to 8 ON/OFF/temperature setting per day in 1 minute
increment. Setting kept in nonvolatile memory. No need to
worry about re-setting at power failure.
• Room temperature control with thermostat sensor inside the unit
• Self-diagnosis function immediately informs error code in case
of malfunction
NEW
• Temperature will be displayed either in Centigrade in 0.5or 1-degree increments, or in Fahrenheit, depending on
the indoor unit model and the display mode setting on
the remote controller.
• Dual set point
When the operation mode is set to the Auto (dual set point)
mode, two preset temperatures (one each for cooling and
heating) can be set. Depending on the room temperature,
indoor unit will automatically operate in either the Cool or
Heat mode and keep the room temperature within the
preset range.
Dimensions: 120(W) x 120(H) x 19(D) mm
: 4-3/4(W) x 4-3/4(H) x 3/4(D) in.
Example of system configuration
M-NET
Non-polarized
2-wire
Non-polarized
2-wire
MA remote controller
MA remote controller
*When a PAR-31MAAE is connected to a group, no other MA remote controllers can be connected
to the same group.
Operation pattern during Auto (dual set point) mode
The room temperature
changes corresponding
to the change in the
outside temperature.
Preset temp.
(COOL)
Room
temperature
Preset temp.
(HEAT)
HEAT
COOL
HEAT
Example of system configuration
Dimensions: 130(W) x 120(H) x 19(D) mm
: 5-1/8(W) x 4-23/32(H) x 3/4(D) in.
Multi-language Display Example
Language
*Please contact your Mitsubishi Electric sales office for details.
Air flow direction setting
Louver setting
Ventilation equipment control
Error information
Timer
Allows/disallows local operation
Operation lock
Temperature range restriction
Auto return
Remote Controller
Page 137
MA remote controller
MA remote controller
[Dot display table]
German
Spanish
Russian
Italian
Chinese
French
Japanese
Waiting for start-up
• Backlit LCD (Liquid Crystal Display)
Large, easy-to-see display
Full-dot LCD display with large characters for easy viewing
Contrast also adjustable
Operation mode
Cool
Dry
Heat
Auto
• Night Setback
To prevent indoor dew or excessive temperature rise, this
control starts heating operation when the control object
group is stopped and the room temperature drops below
the preset lower limit temperature. Also, this control starts
cooling operation when the control object group is stopped
and the room temperature rises above the preset upper
limit temperature.
Auto(Cool)
Auto(Heat)
Fan
Ventilation
Stand by
(Hot adjust)
Defrost
• Language selection
Language to be displayed on the screen can be selected
from eight languages: English, French, German, Spanish,
Italian, Portuguese, Swedish, and Russian.
Not use button
Check (Error)
Test run
Self check
COOL
Unit function selection
: Each group
Room temp. setting
English
Non-polarized
2-wire
Non-polarized
2-wire
• New display-Larger, easier-to-see characters
• Dot Liquid Crystal Display (LCD)
• Multi-language Display
Functions
Item
ON/OFF
Operation mode switching
M-NET
Description
Operations Display
Switches between ON and OFF.
Switches among Cool/Dry/Fan/Auto/Heat.
The temperature can be set within the following range.
Cool/Dry : 19°C - 30°C / 67°F - 87°F
Heat
: 17°C - 28°C / 63°F - 83°F
Auto
: 19°C - 28°C / 67°F - 83°F
* Set temperature range varies depending on the model.
Changes airflow direction.
* Available airflow directions vary depending on the model.
Switches between louver ON/OFF.
Interlocked setting and interlocked operation setting with the CITY MULTI LOSSNAY units can be made.
The Stop/Low/High settings of the ventilation equipment can be controlled.
When an error occurs, an error code and the unit address appear.
Air conditioning unit model, serial number, and contact number can be set to appear when an error occurs.
(The information above needs to be entered in advance.)
* An error code may not appear depending on the error.
ON/OFF timer
Turns ON and OFF daily at a set time.
• Time can be set in 5-minute increments.
• It is also possible to set the ON time only or the OFF time only.
Auto-OFF timer
Turns off the unit after a certain period of operation.
• Operation time can be set to a value from 30 to 240 minutes in 10-minute increments.
The following operation can be prohibited by making certain settings on the centralized controller: ON/OFF,
operation mode setting, temperature setting, fan speed, air direction, and filter sign reset.
* While an operation is prohibited, the operation icon lights up (only on the Main display in the "Full" mode).
The following operation can be prohibited respectively: ON/OFF, operation mode setting, temperature setting, and
airflow direction setting.
The room temperature range for each operation mode can be restricted.
The units operate at the preset temperature after a designated period.
(Time can be set to a value from 30 to 120 in 10-minute increments.)
* Not valid when the temperature setting range is restricted.
Setting of ventilation
: Not available
Functions
: Each unit
Item
ON/OFF
Operation mode switching
Temperature setting
─
Fan speed setting
Air flow direction setting
Permit / Prohibit local operation
Prohibition/permission of specified mode
(Cooling prohibited/heating prohibited
/cooling-heating prohibited)
X
Error
Ventilation equipment
Set temperature range limit
X
Auto lock function
‫ޓ‬: Each group
Description
: Not available
Operations Display
ON and OFF operation for a single group
Switches between Cool / Dry / Auto* / Fan / Heat. Operation modes vary depending on the air conditioner unit.
* Auto only supported for the CITY MULTI R2 and WR2 series.
Sets the temperature for a single group
Range of temperature setting
Cool/Dry : 19°C - 30°C (14°C - 30°C) / 67°F - 87°F (57°F - 87°F)
Heat
: 17°C - 28°C (17°C - 28°C) / 63°F - 83°F (63°F - 83°F)
Auto
: 19°C - 28°C (17°C - 28°C) / 67°F - 83°F (63°F - 83°F)
( ) For PEFY/PFFY by setting DipSW 7-1 to ON and limits to NI6H fan speed only.
Models with 4 air flow speed settings: Hi/Mid-2/Mid-1/Low
Models with 3 air flow speed settings: Hi/Mid/Low
Models with 2 air flow speed settings: Hi/Low
Fan speed setting (including Auto) varies depending on the model.
Air flow direction angles (4-angle, or 5-angle Swing) Auto Louver ON/OFF
Air flow direction settings vary depending on the model.
Individually prohibit operation of each local remote control function (ON/OFF, Change operation mode, Set
temperature, Reset filter).*1: When the local remote controller inactivation command is received from the main
system controller, "
" is displayed.
X
By the setting from System Controller, the operation for the following modes is prohibited.
At cooling prohibited : Coo l, Dry, Auto,
At heating prohibited : Heat, Auto,
At cooling-heating prohibited : Cool, Heat, Dry, Auto
When an error is currently occurring on an air conditioner unit, the afflicted unit and the error code are displayed.
Up to 16 indoor units can be connected to an interlocked system that has one LOSSNAY. LOSSNAY items that can
be set are "Hi" "Low" "Stop". Ventilation mode switching is not available.
Set temperature range limit to cooling, heating, or auto mode.
Setting/releasing of simplified locking for remote control switch can be performed.
· Locking of all switches · Locking of all switches except ON/OFF switch
*1
X
X
Remote Controller
Page 138
Individual
Remote Controller
Wired ME remote controller PAR-F27MEA
Smart ME Controller PAR-U02MEDA
• This remote control requires non-polar wiring to only one indoor
unit.
• Smart ME Controller is a remote controller designed to
control Mitsubishi Electric’s air conditioning units and
also allows for the control of other manufacturer’s
products connected via Mitsubishi Electric’s AHC
(Advanced HVAC CONTROLLER).
• Group operation over multiple outdoor units is possible. Grouping
can be changed without re-wiring, which makes dividing rooms for
tenants easier.
• It can control up to sixteen indoor units and one AHC.
• Smart ME Controller features such basic functions as
operations and monitoring of air conditioning units and
schedule-control functions and is equipped with four
built-in sensors (temperature, humidity, occupancy,
brightness), which enable an integrated control of the
system, including the humidifiers and ventilation units
connected to the system via AHC, to help create a
comfortable environment.
When the built-in occupancy sensor detects vacancy in a
specific zone, the controller uses its internal function to
reduce energy-consumption.
Dimensions : 5-17/32(W) x 4-3/4(H) x 1(D) in.
: 140(W) x 120(H) x 25(D) mm
• LCD temperature setting and display in 1°C/1°F increments.
Example of system configuration
Dimensions: 130(W) x 120(H) x 19(D) mm
: 5-1/8(W) x 4-23/32(H) x 3/4(D) in.
ME R/C
ME R/C
Example of system configuration
Functions
: Each unit
Item
ON/OFF
Operation mode switching
AHC
Smart ME
Controller
Temperature setting
Fan speed setting
Smart ME
Controller
Functions
:Each group
Item
Description
ON/OFF
Switches between ON and OFF.
Fan speed setting
Changes fan speed.
* Available fan speeds vary depending on the model.
Air flow direction setting
Changes airflow direction.
* Available airflow directions vary depending on the model.
Allows/disallows local operation
The following operation can be prohibited by making certain settings on the centralized controller: ON/OFF, operation mode
setting, temperature setting, fan speed, air direction, and filter sign reset.
* While an operation is prohibited, the operation icon lights up.
Error information
When an error occurs, an error code and the unit address appear.
Contact number can be set to appear when an error occurs.
(The information above needs to be entered on the Service menu.)
Schedule (Weekly timer)
Weekly ON/OFF times, operation mode, and set temperatures can be set.
• Time can be set in 5-minute increments. Up to 8 schedule patterns can be set per day of the week.
* Not valid when the ON/OFF timer is set.
Timer
ON/OFF timer
Turns ON and OFF daily at a set time.
• Time can be set in 5-minute increments.
• It is also possible to set the ON time only or the OFF time only.
Auto-OFF timer
Turns off the unit after a certain period of operation.
• Operation time can be set to a value from 30 to 240 in 10-minute increments.
Energy-save control during
vacancy
When vacancy is detected by the occupancy sensor, the energy-save control assist function is activated. Four control types
are available for selection:
ON/OFF temperature/Fan speed/Thermo-off.
The brightness sensor can be used in conjunction with the occupancy sensor to detect the occupancy/vacancy status more
accurately.
Remote Controller
Page 139
:Not available
Operations
Display
‫ޓ‬: Each group
Description
ON and OFF operation for a single group
Switches between Cool / Dry / Auto / Fan / Heat. Operation modes vary depending on the air conditioner unit.
Auto mode the CITY MULTI R2 and WR2 series only.
Sets the temperature for a single group
Range of temperature setting
Cool/Dry : 19°C - 30°C (14°C - 30°C), Heat: 17°C - 28°C (17°C - 28°C), Auto: 19°C - 28°C (17°C - 28°C)
Models with 4 air flow speed settings: Hi/Mid-2/Mid-1/Low
Models with 3 air flow speed settings: Hi/Mid/Low
Models with 2 air flow speed settings: Hi/Low
Fan speed setting varies depending on the model.
Air flow direction setting
Air flow direction angles (4-angle, Swing) Louver ON/OFF
Air flow direction settings vary depending on the model.
Permit / Prohibit local operation
Individually prohibit operation of each local remote control function (ON/OFF, Change operation mode, Set
temperature, Reset filter). *1: When the local remote controller inactivation command is received from the master
system controller, "-CENTRALLY CONTROLLED-" is displayed.
Prohibition/permission of specified mode
(Cooling prohibited/heating prohibited
/cooling-heating prohibited)
Error
Timer operation
Ventilation equipment
Set temperature range limit
Auto lock function
: Not available
Operations Display
By the setting from System Controller, the operation for the following modes is prohibited.
At cooling prohibited : Cool, Dry, Auto, At heating prohibited : Heat, Auto,
At cooling-heating prohibited : Cool, Heat, Dry, Auto
When an error is currently occurring on an air conditioner unit, the afflicted unit and the error code are displayed.
Thanks to the three timer modes equipped, a proper mode can be selected to mee the usage.
One day timer
: ON/OFF setting of one time on one day can be applied.
Daily timer
: ON/OFF setting by the One day timer can be reperted for everyday.
Auto OFF timer : OFF timer can be set in a range from 30 minutes to 4 hours.
* Setting of Auto OFF timer automatically activates OFF timer at the next operation. This function can be utilized
to prevent the negligence of OFF setting.
Up to 16 indoor units can be connected to an interlocked system that has one LOSSNAY. LOSSNAY items that can
be set are "Hi" "Low" "Stop". Ventilation mode switching is not available.
Set temperature range limit to cooling, heating, or auto mode.
Setting/releasing of simplified locking for remote control switch can be performed.
· Locking of all switches · Locking of all switches except ON/OFF switch
X
*1
X
X
Remote Controller
Page 140
Individual
Remote Controller
Wireless remote controller PAR-FL32MA / PAR-FA32MA / PAR-SA9FA
Simple remote controller PAC-YT52CRA (MA)
• Dual set point
When the operation mode is set to the Auto (dual set point)
mode, two preset temperatures (one each for cooling and
heating) can be set. Depending on the room temperature,
indoor unit will automatically operate in either the Cool or
Heat mode and keep the room temperature within the preset
range.
PAR-FL32MA
PAR-FA32MA
Dimensions: 58(W) x 159(H) x 19(D) mm
: 2-5/16(W) x 6-5/16(H) x 3/4(D) in.
*Please contact your Mitsubishi Electric sales office for details.
Dimensions: 70(W) x 120(H) x 22.5(D) mm
: 2-3/4(W) x 4-3/4(H) x 7/8(D) in.
• Backlit LCD
Backlight for operation in dark place
Dimensions: 70(W) x 120(H) x 14.5(D) mm
: 2-3/4(W) x 4-23/32(H) x 9/16(D) in.
Example of system configuration
• Flat back
Install without hole on wall Slim and flat type
Thickness is less than 14.5mm [0.6(in)]
• Vane button (standard)
The Vane button has been added to allow the user to
change airflow direction (ceiling-cassette and wall-mounted
types).
Pressing the
button will switch the vane directions.
Centralized
controller
24VDC
Power supply unit
(PAC-SC51KUA)
AUTO
Simple MA R/C
Setting 1
Setting 2
Setting 3
Setting 4
Setting 5
Swing
Simple MA R/C
*The settable vane direction varies depending on the indoor unit model to be
connected.
* If the unit has no vane function, the vane direction cannot be set.
In this case, the vane icon blinks when the
button is pressed.
PAR-SL94B-E
(Wireless remote controller kit for ceiling suspended)
PAR-SA9FA-E
(4-way Cassette signal receiver)
Dimensions: 182(W) x 57(H) x 31(D) mm
Dimensions: 256(H) x 19(D) mm
• No need to configure addresses for group operation.
• Lit LED keeps you informed of operation - blinking even gives you the error code via the number of blinks.
• Can be used with the MA remote controller.
*When used in group configurations, wiring between indoor units is required.
*Combining ME remote controller and/or LOSSNAY remote controller in a group is not possible.
• LCD temperature setting and display in 1°C /1°F increments.
Example of system configuration
Correspondence table
receiver
• The only wiring required is cross-over wiring based on
two-wire signal lines.
• Room temperature sensors are built-in.
• Can operate all types of indoor units
*Since this controller has limited functions, it should always be used in
conjunction with standard controller or centralized controller.
Non-polarized
2-wire
Signal
receiving
unit
• LCD temperature setting and display in 1°C /1°F increments.
Functions
Item
ON/OFF
Operation mode switching
Temperature setting
Fan speed setting
Permit / Prohibit local operation
Error
Ventilation equipment
Set temperature range limit
Remote Controller
Page 141
‫ޓ‬: Each group
Description
Changes between ON and OFF.
Select from COOL, DRYING, FAN, AUTO, and HEAT.
* AUTO mode is settable only when those functions are available on the indoor unit.
Sets a room temperature.
* The preset temperature range varies depending on the indoor unit model to be connected.
(The ranges for a standard model are as follows.)
• COOL/DRY: 19ºC - 30ºC/67ºF - 87ºF
• HEAT: 17ºC - 28ºC/63ºF - 83ºF
• AUTO: 19ºC - 28ºC/67ºF - 83ºF
Changes the fan speed.
* The settable fan speed varies depending on the indoor unit model to be connected.
By setting a centralized controller, the following local operations are prohibited: ON/OFF; operation mode;
preset temperature;
* The CENTRAL icon appears while the local operations are prohibited.
Displays the current error status with the address.
* The address may not be displayed depending on the error status.
When the CITY MULTI indoor unit is connected, interlocked setting of the CITY MULTI LOSSNAY unit is possible.
When the Mr. SLIM indoor unit (A-control) is connected, interlocked operation of the microcomputer-type LOSSNAY unit is possible.
The preset temperature range can be restricted for each operation mode (COOL/HEAT/AUTO).
: Not available
PAR-SA9FA
PLFY-P VCM/VLMD
PFFY-P VKM
PEFY-P VMR-E-L/R/VMH
PAR-SL94B-E
PFFY-P VLEM/VKM/VLRM/VLRMM
Wireless
remote
controller
Wireless
remote
controller
PAR-SA9FA-E
Wireless
remote
controller
PAR-SL94B-E
PAR-FA32MA
PAR-SL94B-E
PLFY-P VBM-E
PAR-SA9FA-E
PKFY-P VBM-E
PKFY-P VHM/VKM
Built-in
Functions
: Each group
Item
ON/OFF
Temperature setting
Air flow direction setting
X
PAR-FL32MA
PCFY-P VKM
Operations Display
X
PAR-FA32MA
PEFY-P VMS1(L)
PEFY-VMA(L)
PAR-FA32MA
: Each unit
Signal
receiving
unit
Signal
receiving
unit
transmitter
PMFY-P VBM
Timer operation
Permit / Prohibit local operation
Ventilation equipment
Description
ON and OFF operation for a single group
Sets the temperature for a single group
Range of temperature setting
Cool/Dry : 19°C - 30°C (14°C - 30°C) / 67°F - 87°F (57°F - 87°F)
Heat
: 17°C - 28°C (17°C - 28°C) / 63°F - 83°F (63°F - 83°F)
Auto
: 19°C - 28°C (17°C - 28°C) / 67°F - 83°F (63°F - 83°F)
( ) For PEFY/PFFY by setting DipSW 7-1 to ON and limits to NI6H fan speed only.
* Set to PAR-FL32MA according to its Installation Manual 4 "Model setting".
Air flow direction angles (4-angle, Swing) Auto Louver ON/OFF.
Air flow direction settings vary depending on the model.
One ON/OFF setting can be set for one day.
Individually prohibit operation of each local remote control function (ON/OFF, Change operation mode, Set
temperature, Reset filter).
*1 If operation is performed when the local remote controller inactivation command is received from the main system
controller, a buzzer will ring and an LED will flash.
Up to 16 indoor units can be connected to an interlocked system that has one LOSSNAY.
: Not available
Operations Display
*1
X
X
X
Some models will have different display for the air flowdirection and fan speed.
Set the air flow direction and fan speed when performing initial setting.
Remote Controller
Page 142
Centralized
Remote Controller
With our new Advanced Touch Controller AT-50A, easy and simple operation on the touch panel offers an
optimal air environment for individual unit.
Advanced Touch controller AT-50A
Functions
System structure
Three in One
M-NET
M-NET
M-NET
adapter
AT-50A
Power supply unit
PAC-SC51KUA-J
The following three features are integrated into AT-50A.
▪ Control up to 50 indoor units from one location
▪ A weekly programmable timer, being able to control up to
50 indoor units
▪ Control up to 50 units/50 groupsof air conditioners
A Control
Weekly and daily schedule
General Equipment
DIDO Controller
Dimensions: 180(W) x 120(H) x 30(D) mm
: 7-2/16(W) x 4-12/16(H) x 1-3/16(D) in.
Lossnay
5 patterns of one day and 12 patterns of weekly schedule
(16 settings max. per pattern).
Two types of weekly schedule can be set.
System changeover
Operation mode can be switched depending on indoor
temperature setting and target temperature of each group or
a representative indoor unit.
Design
Night setback function
This function allows having a two-temperature setting to
keep the desired room temperature when the units are not
in operation and during the time this function is effective.
The unit automatically starts heating (cooling) operation
when the temperature drops below (rises above) the
preset lower (upper) limit temperature. This is not only for
comfort environment, but also for saving energy.
Main system controller/Sub system
controller
AT-50A can be set to Sub System controller.
When connecting multiple system controllers, designate
the system controller with many functions as the "Main",
and set the system controllers with few functions as the
"Sub".
Simple button arrangement
Backlit LCD (Liquid Crystal Display) Touch Panel
5-inch color LCD touch panel enables easy and simple operation.
The backlight lights up when the panel is touched, and lights off after certain period of time.
The touch panel displays the operation status of the units in GRID, LIST or in GROUP.
Functions
[Basic Functions]
▪ ON/OFF ▪ Operation mode switching
▪ Temperature setting ▪ Fan speed setting
▪ Airflow direction setting ▪ Louver setting
The F1 (Function 1) and the F2 (Function 2) button can be
set as a run button of the following collective operation.
(Setback/Schedule/Operation Mode/Temperature
Correction/Remote Controller Prohibition)
Advanced Functions
: Each unit
GRID (zoom-out) screen
Displays the operation status
of all groups.
GRID (zoom-in) screen
Displays the detailed
operation status of each
group.
Item
Permit / Prohibit
Operation lock
Error display
Ventilation (independent)
LIST screen
Displays the detailed
operation status of each
group with group name.
GROUP screen
Displays the detailed operation
status of each group.
Sets group operations.
Ventilation (interlocked)
Temperature-set
limitation
Specific mode operation
prohibit (Cooling prohibit,
heating prohibit, cooling/
heating prohibit)
‫ޓ‬: Each group ‫ޓ‬
The following input with level signals or pulse signals are available.
Level signal: "Emergency stop input" or "Collective ON/OFF"
Pulse signal: "Collective ON/OFF" or "Local remote controller prohibit/permit"
One input can be selected from those above.
* An external input/output adapter (PAC-YT41HAA (sold separately)) is required.
Relays and DC power supply or other devices must be prepared at the site.
External output
(Error output, operation output)
"ON/OFF" and "error/normal" are output with the level signal.
* An external input/output adapter (PAC-YT41HAA (sold separately)) is required.
Relays and DC power supply or other devices must be prepared at the site.
Schedule operation
: Not available
The LOSSNAY will run in interlock with the operation of indoor unit.
The mode cannot be changed. The LED will turn ON during operation after interlocking.
Batch-setting to temperature range limit at cooling, heating, and auto mode.
This function cannot be used with the MA remote controller. (Depends on the indoor unit model.)
When set as the main controller, operation of the following modes with the local remote controllers can be prohibited.
When cooling is prohibited: Cooling, dry, automatic can not be chosen.
When heating is prohibited: Heating, automatic can not be chosen.
When cooling/heating is prohibited: Cooling, dry, heating, automatic can not be chosen.
External input
(Emergency stop input, etc.)
Checking the Gas Amount
: Group or collective
Description
Operations Display
The ON/OFF, operation mode, setting temperature and filter sign reset operations using the local remote controllers
can be prohibited.
Only ON/OFF and filter reset can be prohibited for the LOSSNAY group.
The operation lock can be set to the input operation of AT-50A.
Each button can be set. (Function Button 1, Function Button 2, Collective ON/OFF, Touch Panel)
Each function can be set. (Operation mode, Setting temperature, Fan speed, Menu button)
The password for the lock release can be set.
When an error is currently occurring on an air conditioner unit, the afflicted unit and the error code are displayed.
* When an error occurs, the "ON/OFF" LED flashes. The operation monitor screen show abnormal icon over the unit.
X
The error monitor screen shows the abnormal unit address and error code. The error log monitor screen shows the
time and date, the abnormal unit address, error code and source of detection.
Switches the mode "Bypass/Heat recovery/Auto" for LOSSNAY groups.
Use this function to check for refrigerant leak from the outdoor unit.
* When this function is used, the gas amount checking function of the outdoor unit cannot be used.
This function is for CITY MULTI R2 and Y (PUMY is excluded.) series only.
Weekly schedule setting up to 12 pattern is available.
In one pattern, up to 16 setting of "ON/OFF", "Operation mode", "Set Temperature", "Fan speed", "Air flow direction"
and "Permit / Prohibit local operation" can be scheduled.
Two types of weekly schedule(Summer/Winter) can be set. Today's schedule setting up to 5 pattern in available.
* Depending on the installation conditions, power supply unit (PAC-SC51KUA) is required. Please contact your local distributor or MITSUBISHI ELECTRIC branch office for further information.
Remote Controller
Page 143
Remote Controller
Page 144
Centralized
Remote Controller
With a new colored touch panel, and continuation of all the G-50A functions, AG-150A visualizes its
functions from basic control to advanced operations and bringing an ultimate controller to reality.
Centralized controller AG-150A
System structure
M-NET
adapter
LAN
(100BASE-TX)
M-NET
Remote
Monitoring PC
A Control
AG-150A
Power supply unit
(PAC-SC51KUA)
Temp/Humidity sensor
Dimensions: 300(W) x 185(H) x 70.3(D) mm
: 11-13/16(W) x 7-5/16(H) x 2-13/16(D) in.
AI Controller (PAC-YG63MCA)
Lights
Ventilation
Watt hour meter
PI Controller (PAC-YG60MCA)
M-NET
Switching Hub
Central Control PC
(TG-2000A)
AG-150A / GB-50ADA
VPN Modem
Router
Controllable units/groups
9 inch wide, high-resolution
General Equipment
DIDO Controller (PAC-YG66DCA)
Switching Hub
Option : Black surface cover
PAC-YG71CBL
Backlight color liquid crystal
Touch panel
Remote monitoring
via a Web browser
*Ver. 6.30 or later
Functions
Backlight makes it easy to see and control units.
One can identify whether a unit is ON or OFF from a
distance.
Control in the night with no lights is possible.
M-NET
Switching Hub
Design
Internet
Flat back
Easy installation
Service company
/Sales office
Modem
VPN
Router
Mobile phone
of service person
Touch panel enables operation of units by touching with
index finger.
When object unit is touched, orange box appears around
the unit icon indicating the unit selected.
Remote
monitoring PC
Remote monitoring
via a Web browser
Note : Use a security device such as a VPN router when connecting the
AG-150A/GB-50ADA to the Internet to prevent unauthorized access.
Allows for an installation of the unit either directly to the
wall surface* or using the installation hole in the wall.
*Optional parts are required.
USB memory compatible
Measurement/initial setting CSV data extractable with
USB memory.
Can save and overwrite setting data.
Expansion Controller PAC-YG50ECA
Functions
With a connection of a Expansion Controller, maximum of 150 units/groups
can be connected to AG-150A.
System structure
Dimensions: 250(W) x 217(H) x 97.2(D) mm
: 9-7/8(W) x 8-9/16(H) x 3-7/8(D) in.
LAN
(100BASE-TX)
PAC-YG50ECA
Monitoring functions
Temperature/Humidity (using AI controller)
General equipment such as lights on LCD (using DIDO
controller)
Interlock function from AI controller, DIDO controller to
indoor units and between DIDO units are available.
AG-150A interlock with DIDO controller or free contact on
an indoor unit available. * Ver. 2.30 or later
Energy saving functions
Seasonal scheduling and automatic switch over *1
Yearly scheduling on LCD *1
Scheduling fan speed and airflow direction
Optimized Start up
External temperature interlock control
Night setback control
*1 License required.
50 units/groups or 150 units/groups via expansion controller; PAC-YG50ECA.
Mode selection
Power supply unit
(PAC-SC51KUA)
Controls up to 50 units/groups (including indoor units,
LOSSNAY, DIDO/AI/PI controller)
Up to 150 units can be controlled via expansion
controller;PAC-YG50ECA (AG-150A software needs to be
upgraded to Ver. 2.10 or later.)
Auto mode is for CITY MULTI R2 and WR2 series only.
Cool/Dry : 19˚C-30˚C (14˚C-30˚C) / 67˚F-87˚F(57˚F-87˚F)
Heat
: 17˚C-28˚C (17˚C-28˚C) / 63˚F-83˚F(63˚F-83˚F)
Auto
: 19˚C-28˚C (17˚C-28˚C) / 63˚F-83˚F(63˚F-83˚F)
AG-150A
PAC-YG50ECA
Central Control PC
(TG-2000A)
Annaul/Weekly (5 types)/today schedule can be set for each group of air conditioning units.
Optimized startup setting is also available.
PAC-YG50ECA
*Do not connect PAC-YG50ECA to TB3 of the outdoor unit.
*Use a security device such as a VPN router when connecting the AG-150A etc. to the Internet
to prevent unauthorized access.
♦Future release schedule is subject to change without notice.
Remote Controller
Page 145
Remote Controller
Page 146
Centralized
Remote Controller
NEW
Centralized controller EB-50GU-J
The Web Server Function enables Remote Operation or Scheduling Via a
Web Browser on a Personal Computer!
Up to 50 indoor units can be controlled!
Just press a switch to start. All of the units can be On/Off by pressing the main switch, and each unit in
the group can be On/Off with individual switch. The PAC-YT40ANRA also has hardwired connection
available (On/Off input, fire alarm input, run output, fault output).
Web Browser
Enables monitoring and operation of indoor units using a PC with
Microsoft® Internet Explorer (Ver.8 or Ver.9)
EB-50GU-J (without display)
ON/OFF remote controller PAC-YT40ANRA
• Dimensions:9-7/8 (W) x 8-9/16 (H) x 3-7/8 (D) in.
:250 (W) x 217 (H) x 97.2 (D) mm
• The group setting is kept in nonvolatile memory. No need to worry
about re-setting at power failure.
• No individual AC power supply is needed.
The power can be supplied from one outdoor unit (R410A) or Power
supply unit.
Function
Air flow direction setting
Timer operation / Schedule
Permit / Prohibit function
Indoor unit intake temperature
Error
Test run
Ventilation interlock
AHC status
Energy Use Status
:Each unit
:Each group
:Each block
:Each floor
:Collective
:Not available
Operations
Display
Run and stop operation for the air conditioner units
Switches between COOL/DRY/FAN/AUTO/HEAT
The temperature can be set within the following range.
Cool/Drying: 67°F - 95°F/19°C - 35°C
Heat: 40°F - 83°F/4.5°C - 28°C
Auto (single set point): 67°F - 83°F/19°C - 28°C
Auto (dual set points)
[Cool] Same as the set temp. range for Cool mode. [Heat] Same as the set temp. range for Heat mode.
Setback (dual set points)
[Cool] Same as the set temp. range for Cool mode. [Heat] Same as the set temp. range for Heat mode.
*The settable temperature ranges and items vary depending on the indoor and outdoor unit models.
Air flow direction angles, 4-angle or 5-angle Swing, Auto (Louver cannot be set)
Annual/Weekly (5 types)/today schedule can be set for each group of air conditioning units. Optimized startup
setting is also available.
Individually prohibit operation of each local remote control function
Measures the intake temperature of the indoor unit only when the indoor unit is operating.
When an error is currently occurring on an air conditioner unit, the afflicted unit and the error code are displayed.
This operates air conditioner units in test run mode.
Operation of indoor groups or general equipment can be interlocked by the change of state (ON/OFF, mode,
error of indoor groups and general equipment).
Displays the status of input and output ports of each Advanced HVAC CONTROLLER (AHC).
On the Energy Use Status screen, the energy-control-related status, such as electric energy consumption,
operation time, and outdoor temperature, can be displayed in a graph.
Operators can check the detailed status of given indoor units by specifying the date to display the data per group,
block, or unit address.
*NOTE: Operation and displayed content vary depending on the indoor unit model.
System Structure (image)
LOSSNAY
Remote monitoring via a
Switching
Web browser
Hub
LAN
PAR-F27MEA
PZ-52SF
ON/OFF
remote
controller
• Enables monitoring and operation from a remote place
• Enables error notification by e-mails to a PC or to a mobile phone
Description
Temperature setting
System example
Using “Dial-up Connection”
JavaTM is a registered trademark of Oracle® and/or its affiliates.
ON / OFF
Mode selection
Dimensions: 130(W) x 120(H) x 19(D) mm
: 5-1/8(W) x 4-23/32(H) x 3/4(D) in.
*When connecting to the Internet, please use the VPN (Virtual Private Network).
EB-50GU-J
M-NET
7
TB7
TB3
Example of display icons (air conditioner icons)
PAR-21MAA
ON
Interlocked
LOSSNAY ON
Energy-saving
ON
OFF
Interlocked
LOSSNAY OFF
Setback ON
Error
Schedule set
Starting up
Filter sign ON
HOLD ON
Router
Error mail
Provider
Error notification mail
Public telephone line
Note : Use a security device such as a VPN router when connecting the EB50GU-J to the Internet to prevent unauthorized access.
When connecting to the transmission line for centralized control (TB7 on the outdoor unit), connect the power supply unit (PAC-SC51KUA) as well.
PAC-YT52CRA
Annual / Weekly Schedule
Enables Weekly and Annual scheduling with a registering license
FUNCTION
UNITS
DESCRIPTION
Max No.Units
PAC-YT40ANRA
50 units/16 groups
OPERATIONS DISPLAY
ON/OFF
ERROR INDICATION
VENTILATION OPERATION
(INDEPENDENT)
VENTILATION OPERATION
(INTERLOCKED)
EXTERNAL INPUT
EXTERNAL OUTPUT
Remote Controller
Page 147
Run and stop operation
LED flashes during failure.
(The error code can be confirmed by removing the cover.)
Group operation of only LOSSNAY units possible.
*Only ON/OFF of group.
The LOSSNAY will run in interlock with the operation of indoor unit.
*The fan rate and mode cannot be changed.
The LED will turn ON only during operation after interlocking.
On/Off/Fire Alarm
On/Off/Faults
• The operations that can be scheduled for air conditioning unit
group: ON/OFF/Optimized Start, Mode, Set Temp, Air Direction,
Fan Speed, and Prohibit Remote Controller operation
• For annual schedule, it is possible to set 50 day-long settings up to
24 months into the future.
Scheduling example in the office
8:00AM
(Start)
ON
12:00PM
1:00PM
3:00PM
(Lunchtime)
(Energy saving)
5:00PM
10:00PM
(Overtime)
81°F [27°C] Cooling
OFF
1 All operations
permitted
2 All operations
prohibited
3 Temperature
adjustment
prohibited
84°F [29°C] Cooling
4 All operations
permitted
5 Temperature
adjustment
prohibited
Up to 12 operation settings per day in 1-minute increment
6 All operations
prohibited
Remote Controller
Page 148
Centralized
Remote Controller
Centralized controller GB-50ADA-J*
*GB-50ADA-J is indicated as GB-50ADA.
The Web Server Function enables Remote Operation or Scheduling
Via a Web Browser on a Personal Computer!
Up to 50 indoor units can be controlled!
Web Browser
Enables monitoring and operation of indoor units using a PC
with Microsoft® Internet Explorer (Ver.6 or 7 or 8) (Web browser
function is an optional and needs license registration.)
GB-50ADA (without display)
• Dimensions:250 (W) x 217 (H) x 97.2 (D) mm
:9-7/8 (W) x 8-9/16 (H) x 3-7/8 (D) in.
AHC ADAPTER PAC-IF01AHC-J
NEW
*When connecting to the Internet, please use the VPN (Virtual Private
Network).
Advanced HVAC CONTROLLER (hereafter referred to as
AHC) comprises of MITSUBISHI ELECTRIC’s AHC ADAPTER
(PAC-IF01AHC-J) and α2 SIMPLE APPLICATION
CONTROLLER* (hereafter referred to as ALPHA2).
Using “Dial-up Connection”
• Enables monitoring and operation from a remote place
• Enables error notification by e-mails to a PC or to a mobile phone
*α2 SIMPLE APPLICATION CONTROLLER is one of the
Programming Logic Controllers that are manufactured by
MITSUBISHI ELECTRIC CORPORATION.
Description
Function
GB-50ADA (web browser)
Up to 50 units/groups.
250 (9-7/8) x 217 (8-9/16) x 97.2 (3-7/8) mm (in)
Run and stop operation for the air conditioner units
Switches between Cool / Dry / Auto / Fan / Heat.
The temperature can be set within the following range.
Cool/Dry :19°C-30°C (14°C-30°C) / 67°F-87°F (57°F-87°F)
Heat
:17°C-28°C (17°C-28°C) / 63°F-83°F (63°F-83°F)
Auto
:19°C-28°C (17°C-28°C) / 67°F-83°F (63°F-83°F)
Controllable unit
Dimensions W x H x D
ON / OFF
Mode selection
Temperature setting
Dimensions: 4-9/16(W) x 3-1/2(H) x 1-9/16(D) in.
: 116(W) x 90(H) x 40(D) mm
AHC allows for the connection of MITSUBISHI ELECTRIC’s air conditioning network system (hereafter referred to as
M-NET) to other systems, which was not possible with the use of ALPHA2 alone. AHC provides the following functions.
( ) in case of using middle-temperature on PEFY, PEFY-VML/VMR/VMS/VMH by setting DipSW7-1 to ON. Yet, PEFY-P-VMH-E-F is excluded.
Air flow direction setting
Schedule operation
Permit / Prohibit function
Indoor unit intake temperature
Error
Test run
Ventilation interlock
*Set temperature range varies depending on the model.
Air flow direction angles, 4-angle or 5-angle Swing, Auto (Louver cannot be set)
Annaul/Weekly (5 types)/today schedule can be set for each group of air conditioning units.
Optimized startup setting is also available.
Individually prohibit operation of each local remote control function
Measures the intake temperature of the indoor unit only when the indoor unit is operating.
When an error is currently occurring on an air conditioner unit, the afflicted unit and the error code are displayed.
Operation of indoor groups or general equipment can be interlocked by the change of state (ON/OFF, mode, error of indoor groups
and general equipment).
*NOTE: Operation and displayed content vary depending on the indoor unit model.
License registration is necessary to perform each function on GB-50ADA.
System Structure
Remote monitoring via a
Switching
Web browser
LAN Hub
1
2
3
4
5
Controls external devices using the sensor data of the air conditioning units connected to M-NET.
Interlocks the operation of air conditioning units and external devices that are connected to ALPHA2.
Controls air conditioning units that are connected to M-NET.
Allows for the combined use of the items 1 - 3 above.
Monitors the input/output status of ALPHA2 via a remote controller or a centralized controller.
Compatible controllers
• Remote Controller: PAR-U02MEDA
• Centralized Controller: EB-50GU-J
* Refer to the manual that came with ALPHA2 for information about ALPHA2.
* The use of AHC ADAPTER requires either a remote controller or a centralized controller.
GB-50ADA
M-NET
Web license
System Structure
Example of display icons (air conditioner icons)
Router
Error mail
Provider
Transmits abnormality mail.
Public telephone line
Power (24 VDC)
Power supply unit
PAC-SC51KUA
(optional)
LAN
Note : Use a security device such as a VPN router when connecting the
AG-150A/GB-50ADA to the Internet to prevent unauthorized access.
Annual / Weekly Schedule
utdoor unit (Y)
outdoor
Enables Weekly and Annual scheduling with a registering
license
AHC Adapter
M-NET
17:00
27°C [81°F] Cooling
1 All operations
permitted
2 All operations
prohibited
PAR-U02MEDA
M-NET
12:00
13:00
15:00
(Lunchtime)
(Energy saving)
OFF
3 Temperature
adjustment
prohibited
Group 2
ALPHA2
Scheduling example in the office
ON
Group 1
AHC
• ON/OFF, operation mode, temperature setting, prohibit remote
controller operation can be set.
• For annual schedule, it is possible to set 50 day-long settings up to
24 months into the future.
8:00
(Start)
Centralized controller
EB-50GU-J
M-NET
(Overtime)
tdoor unit (R
outdoor
(R2)
22:00
Group 3
29°C [84°F] Cooling
4 All operations
permitted
5 Temperature
adjustment
prohibited
BC controller
6 All operations
prohibited
Up to 24 operation settings per day in 1-minute increment
Remote Controller
Page 149
Remote Controller
Page 150
Centralized
Remote Controller
PI Controller PAC-YG60MCA
DIDO Controller PAC-YG66DCA
No more PLCs are needed!
Our new PI controller makes it possible to perform energy
saving without PLC, which is cost saving.
Maximum of 4 measurement meter (WHM, gas meter, water
meter, calorie meter) can be connected to the PI controller
and can be used also for charge calculation.
Dimension: 200(W) x 120(H) x 45(D) mm
: 7-7/8(W) x 4-3/4(H) x 1-13/16(D) in.
Capacity
Enables Energy Saving Control with the use of our new PI controller.
(Registration of “Energy Management license pack” is required.)
80%
To perform energy saving, the capacity of the outdoor unit is
controlled.
Dimension: 200(W) x 120(H) x 45(D) mm
: 7-7/8(W) x 4-3/4(H) x 1-13/16(D) in.
Maximum Capacity at 80%
Amount of saved energy
Capacity
Value
No energy-saving With energy-savining effects
effects
Time
*Please note that when using an energy saving control,
there are no warranties to failures such as usage over the contracted electricity.
System Structure
. Control level setting
. Monitors current state
AG-150A
LAN
. Monitors demand level
*24 VDC power needs to be provided on site.
*24 VDC power needs to be provided on site.
Energy Saving Control (Peak Cut)
Remote monitoring via a
Web browser
No more PLCs are needed!
Our new DIDO controller makes it possible to control
general-purpose equipment without PLC, which is cost saving.
Up to 6 general-purpose equipment can be connected to
the DIDO controller.
Enables to control and monitor equipment other than air-conditioners (air-conditioners of other companies,
lights, ventilators, etc.)
System Structure
• In addition to above, the
air-conditioners can be interlocked
with general-purpose equipment.
E.g. Interlock between indoor units
and security system.
• The indoor units can be turned
ON/OFF when the security system
is activated/deactivated.
AG-150A
LAN
M-NET
DIDO controller
Icon display (Lights)
M-NET
Registration of
“Energy Management
license pack”
General-purpose equipment Control
. Outdoor unit control
- Capacity control
. Indoor unit control
- ± 2°C control
- Fan control
- Stop control
. Monitors electric power
PI controller
Lights
Security card reader
ON
OFF
Error
AC of other companies
Schedule set
AI Controller PAC-YG63MCA
Our new AI controller makes it possible to monitor the values
measured by the temperature/humidity sensor connected to
the AI controller.
The AI controller has two input and two output channels.
Watt-hour meter
Max. 4
*24 VDC power needs to be provided on site.
Charge Calculation
Temperature/Humidity Monitoring
Enables charge calculation for each tenant and output as CSV file
Monitors the values measured by the temperature/humidity
Dimension: 200(W) x 120(H) x 45(D) mm
: 7-7/8(W) x 4-3/4(H) x 1-13/16(D) in. sensor connected to the AI controller
System Structure
Temperature : Pt100, 4 to 20mA DC, 1 to 5 VDC, 0 to 10 VDC
Humidity : 4 to 20mA DC, 1 to 5 VDC, 0 to 10 VDC
TG-2000A collects operation
and electric power data from
AG-150A and PI controller and
does apportion calculation.
LAN
• Trend displays of measurement data can be shown on a Web browser.
• An alarm can be output by e-mail when measurement data exceeds a preset upper or lower limit.
AG-150A monitors every minute and
stores operation data necessary for
charging.
AG-150A
System Structure
Remote monitoring via a
Web browser
M-NET
AG-150A
LAN
M-NET
Registration of
“Energy Management
license pack”
PI controller counts pulse output from
the watt-hour meter.
Remote Controller
Page 151
PI controller
Watt-hour meter
Temperature sensor
AI controller
Humidity sensor
Remote Controller
Page 152
Integrated centralized control software TG-2000A
LONWORKS (LMAP04)
CITY MULTI can easily combine into a Building Management System (BMS) via the LONWORKS and M-NET adapter LMAP04.
LONWORKS is an opened transmission protocol widely used at BMS, and related equipment control.
CITY MULTI is therefore compatible with large-scaled BMS management via LONWORKS .
Example of Basic System Configuration
*1
Energy
management
license
pack
Input
Single-phase 208/230V
T
M-NET
One LM ADAPTER unit can connect up to 50 Groups/50 indoor units.
Using a single LONWORKS adapter (LM-AP), you can connect up to a maximum of 50 indoor units.
AG-150A
etc.
LM-AP
24VDC
Single-phase 208/230V
LMAP04
Example of System Configuration
This device complies with Part15 of the FCC Rules.Operation is
subject to the following two conditions: (1)this device may not cause
harmful interference, and (2)this device must accept any interference
received, including interference that may cause undesired operation.
Outdoor unit
[ 24 VDC Power Supply]
PI Controller
(PAC-YG60MCA)
Indoor unit system watt-hour meter
Uninterruptive
power supply (UPS)
Personal computer for
TG-2000A
Outdoor unit
PLC (PAC-YG21CDA)
The electric amount count software or separately
procured parts must be used with the designated PLC.
power source
LONWORKS
(78kbps)
M-NET
LM-AP
Indoor unit system watt-hour meter
Indoor unit watt-hour meter
Outdoor unit system watt-hour meter
Indoor units
Max. 50 indoor units
PLC (with electric amount count software)
Lighting
Integrated
centralized control
software installation
Center
control device
*1 GB-50ADA can be used.
Indoor units
Remote
controller
Security
Indoor units
Remote
controller
Indoor units
Remote
controller
Indoor units
Remote
controller
Remote
controller
LONWORKS
The building management system is connected to the CITY MULTI air conditioning system using LONWORKS , which is widely used on field
networks, allowing for an open network and savings in construction to face.
The air-conditioning layout can be displayed
on the screen, making control and operation
easier.
LON, LONWORKS and the Echelon logo are trademarks of Echelon Corporation registered in the United
States and other countries.
LONWORKS
FUNCTION
Effective use of TG-2000A
Multiple air conditioning charges in multiple buildings can be calculated. The power apportionment percentage
data and apportioned power rate can be calculated for each unit, and can be output as a CSV file.
For example, installing TG-2000A to the system in the headquarters makes it possible to control AG-150A, EB50GU-J,
or GB-50ADA-J units that are used in branch offices.
Page 153
M-NET
LM-AP
CITY MULTI
System design made simple through integration of
various devices into a total control configuration.
Indoor unit system watt-hour meter
Outdoor unit system
watt-hour meter
Remote Controller
LONWORKS
CITY MULTI System
Power supply unit
PAC-SC51KUA
3-phase 208/230V
(3-wire)
Protocol converter
between LONWORKS
and M-NET
Control
ON/OFF
Mode Operation
Setpoint Adjustment
Fan Speed Control
Permit/Prohibit
Emergency Stop
Monitoring
ON/OFF
Mode
Setpoint
Fan Speed
Permit/Prohibit
Alarm State
Room Temperature
Thermo ON/OFF
INTERFACE
CONTENT
Run/Stop
Cooling/Drying/Heating/Auto/Fan/Setback
Cooling 19-35°C, Heating 4.5-28°C, Auto 19-28°C
Lo-Mi1-Mi2-Hi
ON/OFF, Mode, Setpoint
Run/Stop
Cooling/Drying/Heating/Auto/Fan/Setback
Cooling 19-35°C, Heating 4.5-28°C, Auto 19-28°C
Lo-Mi1-Mi2-Hi
ON/OFF, Mode, Setpoint
-10°C~50°C
ON/OFF
Remote Controller
Page 154
BACnet® (BAC-HD150)
CITY MULTI can easily combine into a Building Management System (BMS) via the BACnet® and M-NET adapter BAC-HD150. BACnet®
is an opened transmission protocol widely used at BMS, and related equipment control. CITY MULTI is therefore compatible with
large-scaled BMS management via BACnet®.
BAC-HD150 can control up to 50 units/groups (including LOSSNAY).
Up to 150 units/groups (including LOSSNAY) can be controlled from one BAC-HD150 with three expansion controllers
PAC-YG50ECA. (50 units/PAC-YG50ECA)
When the dual-set-point function is used, no expansion controllers can be connected, and only up to 50 units/groups can be
controlled from each BAC-HD150.
System example (Connection of 150 units / groups with PAC-YG50ECA)
Central
monitor
BACnet® /IP
BACnet® /IP
BMS
LAN1
LAN2
M-NET
M-NET
BAC-HD150
PAC-YG50ECA
HUB
ME remote
controller
ME remote
controller
PAC-SC51KUA
LAN
M-NET
LOSSNAY unit
ME remote
controller
AG-150A
PZ-52SF
M-NET
M-NET
M-NET
PAC-YG50ECA
ME remote
controller
ME remote
controller
M-NET
M-NET
PAC-YG50ECA
LOSSNAY unit
ME remote
controller
PZ-52SF
BACnet® and M-NET adapter
FUNCTION
Operation
ON/OFF
Mode
Fan Speed
Airflow Direction
Set Temperature
Filter Sign Reset
Permit/Prohibit
Forced OFF
Monitoring
ON/OFF
Mode
Fan Speed
Air Direction
Set Temperature
Filter Sign
Permit/Prohibit
Indoor Temperature
Alarm Signal
Error Code
Communication State
Remote Controller
Page 155
CONTENT
Run/Stop
Cool/Dry/Heat/Auto/Fan/Setback
Low-Mid1-Mid2-Hi
Horizontal- 60°-80°-100°swing
Cooling 19-35°C [67-95°F], Heating 4.5-28°C [40-83°F], Auto 19-28°C [67-83°F]
Normal/Reset
ON/OFF, Mode, Filter sign reset, Set temp.
Release/Effective
Run/Stop
Cool/Dry/Heat/Fan/Setback
Low-Mid1-Mid2-Hi
Horizontal- 60°-80°-100°swing
Cooling 19-35°C [67-95°F], Heating 4.5-28°C [40-83°F], Auto 19-28°C [67-83°F]
Normal/Reset
ON/OFF, Mode, Filter sign reset, Set temp.
Normal/Abnormal
2 Character code- Indicates all unit alarms
Normal/Abnormal
OPTIONAL PARTS FOR INDOOR UNITS
>>4-way cassette type (PLFY-VBM/VCM)
Description
Applicable capacity
VBM
Model
–
P20, P25, P32, P40
P32, P40, P50, P63, P80, P100, P125
P32, P40, P50, P63, P80, P100, P125
P32, P40, P50, P63, P80, P100, P125
P32, P40, P50, P63, P80, P100, P125
P32, P40, P50, P63, P80, P100, P125
P32, P40, P50, P63, P80, P100, P125
P32, P40, P50, P63, P80, P100, P125
P32, P40, P50, P63, P80, P100, P125
P32, P40, P50, P63, P80, P100, P125
–
–
–
–
–
–
–
–
–
SLP-2AAW / SLP-2ALW
Decoration panel
Automatic Filter Elevation Panel
Multi-functional casement
High-efficiency filter element
Wireless signal receiver
Space panel
“i-see” sensor
Duct flange for fresh air intake
Shutter plate
PLP-6BA
PLP-6BAJ
PAC-SH53TM-E
PAC-SH59KF-E
PAR-SA9FA-E
PAC-SH48AS-E
PAC-SA1ME-E
PAC-SH65OF-E
PAC-SH51SP-E
>>2-way cassette type (PLFY-VLMD)
Description
Decoration panel
OA duct flange
Remarks
VCM
SLP-2ALW is for PLFY-P-VCM-E2 or later model only.
For more detailed information, please contact your
nearest sales office or distributor.
>>1-way cassette type(PMFY-VBM)
Model
Applicable capacity
Description
Model
Applicable capacity
CMP-40VLW-C
CMP-63VLW-C
CMP-100VLW-C
CMP-125VLW-C
PAC-KH11OF
P20, P25, P32, P40
P50, P63
P80, P100
P125
P20, P25, P32, P40, P50, P63, P80, P100
Decoration panel
PMP-40BMW
P20, P25, P32, P40
>>Ceiling concealed type (PEFY-VMH(S))
Description
Drain pump
Long life filter
Filter box
O ptional parts
Model
PAC-KE04DM-F
PAC-KE05DM-F
PAC-KE86LAF
PAC-KE88LAF
PAC-KE89LAF
PAC-KE85LAF
PAC-KE63TB-F
PAC-KE80TB-F
PAC-KE140TB-F
PAC-KE250TB-F
Applicable capacity
P40~P250VMH
P200, P250VMHS
P40, P50, P63
P71, P80
P100, P125, P140
P200, P250
P40, P50, P63
P71, P80
P100, P125, P140
P200, P250
Remarks
Necessary when long life filter is used
>>Ceiling concealed type (PEFY-VMA(L))
Description
Filter box
Model
PAC-KE91TB-E
PAC-KE92TB-E
PAC-KE93TB-E
PAC-KE94TB-E
PAC-KE95TB-E
Applicable capacity
P20, P25, P32
P40,P50
P63, P71, P80
P100, P125
P140
>>Fresh air intake type (PEFY-VMH-E-F)
Description
Long life filter
Filter box
Drain pump
Model
PAC-KE88LAF
PAC-KE89LAF
PAC-KE85LAF
PAC-KE80TB-F
PAC-KE140TB-F
PAC-KE250TB-F
PAC-KE04DM-F
Applicable capacity
P80
P140
P200, P250
P80
P140
P200/P250
P80, P140, P200, P250
>>Ceiling suspended type (PCFY-VKM)
Description
Drain pump kit
High efficiency filter
Wireless remote controller kit
Model
PAC-SH83DM-E
PAC-SH84DM-E
PAC-SH88KF-E
PAC-SH89KF-E
PAC-SH90KF-E
PAR-SL94B-E
Applicable capacity
P40
P63,100,125
P40
P63
P100,125
P40,63,100,125
>>Ceiling concealed type (PEFY-VMS1(L))
Description
Drain pump
Control box replace kit
Model
PAC-KE07DM-E
PAC-KE70HS-E
Applicable capacity
P15, 20, 25, 32, 40, 50, 63
P15, 20, 25, 32, 40, 50, 63
*For PEFY-VMS1L only
>>Wall mounted type (PKFY-VBM/VHM/VKM)
Description
External LEV Box
Drain pump kit
Model
PAC-SG95LE-E
PAC-SH75DM-E
PAC-SH94DM-E
Applicable capacity
P15, 20, 25, 32, 40, 50, 63
P32, 40, 50
P63,100
Optional parts
Page 156
Page 157
OPTIONAL PARTS FOR OUTDOOR UNITS
>>For PUCY series
Description
Twinning kit
Branch pipe (Joint)
Model
CMY-Y100VBK3
CMY-Y200VBK2
CMY-Y300VBK3
CMY-Y102SS-G2
CMY-Y102LS-G2
Remarks
For PUCY-P550~P650 / EP400~EP650YSKA
For PUCY-P700~P1000 / EP700YSKA
For PUCY-P1050~P1350 / EP750~EP1100YSKA
200 or below (Total capacity of indoor unit)
201-400 (Total capacity of indoor unit)
401-650 (Total capacity of indoor unit)
The 1st branch of P450~P650
651 or above (Total capacity of indoor unit)
The 1st branch of P700~P1250
For 4 branches
For 8 branches
For 10 branches
CMY-Y202S-G2
CMY-Y302S-G2
Branch pipe (Header)
OPTIONAL PARTS FOR CONTROL
CMY-Y104-G
CMY-Y108-G
CMY-Y1010-G
Note : Indoor unit capacities: the capacity of an indoor unit is the same as the number used for its type identification.
>>For PUMY series
Description
Branch Pipe (2 Branch)
Header
Header
Drain Socket
Centralized Drain Pan
Port Connector (ø9.52 → ø12.7)
Port Connector (ø15.88 → ø19.05)
Air Protect Guide (2 pcs required)
Air Outlet Guide
Base Heater
>>For PUHY series
Description
Twinning kit
Branch pipe (Joint)
Control box guard
Description
Remote Sensor for A/J/K/M-Net Control
Remote ON/OFF adaptor for Indoor Unit
Remote Display Adaptor for Indoor Unit
Timer Adaptor for remote controller
Output signal connector
Input signal connector
Transmission booster
Air conditioner interface
Electric amount count software
BAC net R interface
BAC net R and M-NET adapter
Model
CMY-Y62-G-E
CMY-Y64-G-E
CMY-Y68-G-E
PAC-SG61DS-E
PAC-SH97DP-E
PAC-SG73RJ-E
PAC-SG75RJ-E
PAC-SH95AG-E
PAC-SH96SG-E
PAC-SJ20BH-E
Model
CMY-Y100VBK2
CMY-Y200VBK2
CMY-Y300VBK2
CMY-Y102SS-G2
CMY-Y102LS-G2
Model
PAC-YG10HA
PAC-YG50ECA
PAC-SC51KUA
PAC-YG81TB
PAC-YG83UTB
PAC-YG85KTB
PAC-YG71CBL
Description
External input/output adapter for AG-150A
Expansion controller for AG-150A
Power supply unit for AG-150A / GB-50ADA
Mounting attachment B type for AG-150A wall-mount installations
Electric box for AG-150A wall-embed installations
Mounting attachment A type for AG-150A/PAC-SC51KUA wall-mount installations
Black surface cover for AG-150A
OPTIONAL EQUIPMENT FOR BC CONTROLLER
BC Controller Model
CMB-P104V-G1, GB1
CMB-P105V-G1
CMB-P106V-G1
CMB-P108V-G1, GA1, GB1
CMB-P1010V-G1, GA1
CMB-P1013V-G1, GA1
CMB-P1016V-G1, GA1, HA1, HB1
Junction pipe kit
CMY-R160-J1
Branch pipe
CMY-Y102SS-G2
Remarks
For PUHY-P500~P650YSHA / EP400~EP600YSJM
For PUHY-P700~P900YSHA
For PUHY-P950~P1250YSHA / EP650~EP900YSJM
200 or below (Total capacity of indoor unit)
201-400 (Total capacity of indoor unit)
401-650 (Total capacity of indoor unit)
The 1st branch of P450~P650
651 or above (Total capacity of indoor unit)
The 1st branch of P700~P1250
For 4 branches
For 8 branches
For 10 branches
For PUHY-P-Y(S)HA
CMY-Y202S-G2
CMY-Y302S-G2
Branch pipe (Header)
Model
PAC-SE41TS-E
PAC-SE55RA-E
PAC-SA88HA-EP
PAC-SA89TA-EP
PAC-SC37SA-E
PAC-SC36NA-E
PAC-SF46EPA
LMAP04-E
PAC-YG11CDA
PAC-YG31CDA
BAC-HD150
CMY-Y104-G
CMY-Y108-G
CMY-Y1010-G
PAC-KK45HY
Note : Indoor unit capacities: the capacity of an indoor unit is the same as the number used for its type identification.
>>For PURY series
Description
Twinning kit
Branch pipe (Joint)
Model
CMY-R100VBK
CMY-R200VBK
CMY-R100XLVBK
CMY-R200XLVBK
CMY-Y102SS-G2
CMY-Y102LS-G2
Remarks
For PURY-P400~P650 / EP400~EP600YSJM
For PURY-P700~P800YSJM
For PURY-P800 / EP600~700YSJM
For PURY-P850~900YSJM
200 or below (Total capacity of indoor unit)
201-400 (Total capacity of indoor unit)
401-650 (Total capacity of indoor unit)
The 1st branch of P450~P650
Relay box should be used together with Base heater PAC-BH-EHT-E.
For S Module
For L Module
For XL Module
CMY-Y202S-G2
Relay box
Base heater
PAC-BH02KTY-E
PAC-BH01EHT-E
PAC-BH02EHT-E
PAC-BH03EHT-E
Note : Indoor unit capacities: the capacity of an indoor unit is the same as the number used for its type identification.
>>For PQHY series
Description
Branch pipe (Joint)
Branch pipe (Header)
Twinning kit
Model
CMY-Y102SS-G2
CMY-Y102LS-G2
CMY-Y202S-G2
CMY-Y302S-G2
CMY-Y104-G
CMY-Y108-G
CMY-Y1010-G
CMY-Y100VBK2
CMY-Y300VBK2
Remarks
200 or below (Total capacity of indoor unit)
201-400 (Total capacity of indoor unit)
401-650 (Total capacity of indoor unit)
The first branch of P400-P600
651 or above (Total capacity of indoor unit)
For 4 branches
For 8 branches
For 10 branches
For PQHY-P400-P600YSHM-A
For PQHY-P650-P900YSHM-A
>>For PQRY series
Description
Branch pipe (Joint)
Model
CMY-Y102SS-G2
CMY-Y102LS-G2
CMY-Y202S-G2
Twinning kit
CMY-Q100VBK
Remarks
200 or below (Total capacity of indoor unit)
201-400 (Total capacity of indoor unit)
401-650 (Total capacity of indoor unit)
The first branch of P400-P600
For PQRY-P400-P600YSHM-A
Snow Hood
Prevention the Outdoor unit from wind and snow damages in cold or snowy areas, snow hood is recommended
and helpful.
*Do not use a snow hood made of stainless steel, which may cause the unit to rust. If the use of a stainless
snow hood is the only option, contact the sales office before installing it.
Refer to the data book for details.
Optional parts
Page 158
Optional parts
Page 159
Installation information
1. General precautions
1-1. Usage
♦The air-conditioning system described in this catalogue is designed for human comfort.
♦This product is not designed for preservation of food, animals, plants, precision equipment, or art objects. To
prevent quality loss, do not use the product for purposes other than what it is designed for.
♦To reduce the risk of water leakage and electric shock, do not use the product for air-conditioning vehicles or
vessels.
1-2. Installation environment
♦Do not install any unit other than the dedicated unit in a place where the voltage changes a lot, large amounts
of mineral oil (e.g., cutting oil) are present, cooking oil may splash, or a large quantity of steam can be
generated such as a kitchen.
♦Do not install the unit in acidic or alkaline environment.
♦Installation should not be performed in the locations exposed to chlorine or other corrosive gases. Avoid near a
sewer.
♦To reduce the risk of fire, do not install the unit in a place where flammable gas may be leaked or inflammable
material is present.
♦This air conditioning unit has a built-in microcomputer. Take the noise effects into consideration when
deciding the installation position. Especially in a place where antenna or electronic device are installed, it is
recommended that the air conditioning unit be installed away from them.
♦Install the unit on a solid foundation according to the local safety measures against typhoons, wind gusts, and
earthquakes to prevent the unit from being damaged, toppling over, and falling.
1-3. Backup system
♦In a place where air conditioner's malfunctions may exert crucial influence, it is recommended to have two or
more systems of single outdoor units with multiple indoor units.
1-4. Unit characteristics
♦Heat pump efficiency depends on outdoor temperature. In the heating mode, performance drops as the outside
air temperature drops. In cold climates, performance can be poor. Warm air would continue to be trapped near
the ceiling and the floor level would continue to stay cold. In this case, heat pumps require a supplemental
heating system or air circulator. Before purchasing them, consult your local distributor for selecting the unit and
system.
♦When the outdoor temperature is low and the humidity is high, the heat exchanger on the outdoor unit side
tends to collect frost, which reduces its heating performance. To remove the frost, Auto-defrost function will be
activated and the heating mode will temporarily stop for 3-10 minutes. Heating mode will automatically resume
upon completion of defrostprocess.
♦Air conditioner with a heat pump requires time to warm up the whole room after the heating operation begins,
because the system circulates warm air in order to warm up the whole room.
♦The sound levels were obtained in an anechoic room. The sound levels during actual operation are usually
higher than the simulated values due to ambient noise and echoes. Refer to the section on "SOUND LEVELS"
for the measurement location.
♦Depending on the operation conditions, the unit generates noise caused by valve actuation, refrigerant flow,
and pressure changes even when operating normally. Please consider to avoid location where quietness is
required.
For BC controller, it is recommended to unit to be installed in places such as ceilings of corridor, restrooms and
plant rooms.
♦The total capacity of the connected indoor units can be greater than the capacity of the outdoor unit. However,
Page 160
when the connected indoor units operate simultaneously, each unit's capacity may become smaller than the
rated capacity.
♦When the unit is started up for the first time within 12 hours after power on or after power failure, it performs
initial startup operation (capacity control operation) to prevent damage to the compressor. The initial startup
operation requires 90 minutes maximum to complete, depending on the operation load.
1-5. Relevant equipment
♦Use an earth leakage breaker (ELB) with medium sensitivity, and an activation speed of 0.1 second or less.
♦Consult your local distributor or a qualified technician when installing an earth leakage breaker.
♦If the unit is inverter type, select an earth leakage breaker for handling high harmonic waves and surges.
♦Leakage current is generated not only through the air conditioning unit but also through the power wires.
Therefore, the leakage current of the main power supply is greater than the total leakage current of each unit.
Take into consideration the capacity of the earth leakage breaker or leakage alarm when installing one at the
main power supply. To measure the leakage current simply on site, use a measurement tool equipped with a
filter, and clamp all the four power wires together. The leakage current measured on the ground wire may not
accurate because the leakage current from other systems may be included to the measurement value.
♦Do not install a phase advancing capacitor on the unit connected to the same power system with an inverter
type unit and its equipment.
♦If a large current flows due to the product malfunctions or faulty wiring, both the earth leakage breaker on the
product side and the upstream overcurrent breaker may trip almost at the same time. Separate the power
system or coordinate all the breakers depending on the system's priority level.
1-6. Unit installation
♦Your local distributor or a qualified technician must read the Installation Manual that is provided with each unit
carefully before performing installation work.
♦Consult your local distributor or a qualified technician when installing the unit. Improper installation by an
unqualified person may result in water leakage, electric shock, or fire.
♦Ensure there is enough space around each unit.
1-7. Optional accessories
♦Only use accessories recommended by Mitsubishi Electric. Consult your local distributor or a qualified
technician when installing them. Improper installation by an unqualified person may result in water leakage,
electric leakage, system breakdown, or fire.
♦Some optional accessories may not be compatible with the air conditioning unit to be used or may not suitable
for the installation conditions. Check the compatibility when considering any accessories.
♦Note that some optional accessories may affect the air conditioner's external form, appearance, weight,
operating sound, and other characteristics.
1-8. Operation/Maintenance
♦Read the Instruction Book that is provided with each unit carefully prior to use.
♦Maintenance or cleaning of each unit may be risky and require expertise. Read the Instruction Book to ensure
safety.
Consult your local distributor or a qualified technician when special expertise is required such as when the
indoor unit needs to be cleaned.
Page 161
when the connected indoor units operate simultaneously, each unit's capacity may become smaller than the
rated capacity.
♦When the unit is started up for the first time within 12 hours after power on or after power failure, it performs
initial startup operation (capacity control operation) to prevent damage to the compressor. The initial startup
operation requires 90 minutes maximum to complete, depending on the operation load.
1-5. Relevant equipment
♦Use an earth leakage breaker (ELB) with medium sensitivity, and an activation speed of 0.1 second or less.
♦Consult your local distributor or a qualified technician when installing an earth leakage breaker.
♦If the unit is inverter type, select an earth leakage breaker for handling high harmonic waves and surges.
♦Leakage current is generated not only through the air conditioning unit but also through the power wires.
Therefore, the leakage current of the main power supply is greater than the total leakage current of each unit.
Take into consideration the capacity of the earth leakage breaker or leakage alarm when installing one at the
main power supply. To measure the leakage current simply on site, use a measurement tool equipped with a
filter, and clamp all the four power wires together. The leakage current measured on the ground wire may not
accurate because the leakage current from other systems may be included to the measurement value.
♦Do not install a phase advancing capacitor on the unit connected to the same power system with an inverter
type unit and its equipment.
♦If a large current flows due to the product malfunctions or faulty wiring, both the earth leakage breaker on the
product side and the upstream overcurrent breaker may trip almost at the same time. Separate the power
system or coordinate all the breakers depending on the system's priority level.
1-6. Unit installation
♦Your local distributor or a qualified technician must read the Installation Manual that is provided with each unit
carefully before performing installation work.
♦Consult your local distributor or a qualified technician when installing the unit. Improper installation by an
unqualified person may result in water leakage, electric shock, or fire.
♦Ensure there is enough space around each unit.
1-7. Optional accessories
♦Only use accessories recommended by Mitsubishi Electric. Consult your local distributor or a qualified
technician when installing them. Improper installation by an unqualified person may result in water leakage,
electric leakage, system breakdown, or fire.
♦Some optional accessories may not be compatible with the air conditioning unit to be used or may not suitable
for the installation conditions. Check the compatibility when considering any accessories.
♦Note that some optional accessories may affect the air conditioner's external form, appearance, weight,
operating sound, and other characteristics.
1-8. Operation/Maintenance
♦Read the Instruction Book that is provided with each unit carefully prior to use.
♦Maintenance or cleaning of each unit may be risky and require expertise. Read the Instruction Book to ensure
safety.
Consult your local distributor or a qualified technician when special expertise is required such as when the
Page 162
indoor unit needs to be cleaned.
2. Precautions for Indoor unit
2-1. Operating environment
♦The refrigerant (R410A) used for air conditioner is non-toxic and nonflammable. However, if the refrigerant
leaks, the oxygen level may drop to harmful levels. If the air conditioner is installed in a small room, measures
must be taken to prevent the refrigerant concentration from exceeding the safety limit even if the refrigerant
should leak.
♦If the units operate in the cooling mode at the humidity above 80%, condensation may collect and drip from the
indoor units.
2-2. Unit characteristics
♦The return air temperature display on the remote controller may differ from the ones on the other thermometers.
♦The clock on the remote controller may be displayed with a time lag of approximately one minute every month.
♦The temperature using a built-in temperature sensor on the remote controller may differ from the actual room
temperature due to the effect of the wall temperature.
♦Use a built-in thermostat on the remote controller or a separately-sold thermostat when indoor units installed
on or in the ceiling operate the automatic cooling/heating switchover.
♦The room temperature may rise drastically due to Thermo OFF in the places where the air conditioning load is
large such as computer rooms.
♦Be sure to use a regular filter. If an irregular filter is installed, the unit may not operate properly, and the
operation noise may increase.
♦The room temperature may rise over the preset temperature in the environment where the heating air
conditioning load is small.
2-3. Unit installation
♦For simultaneous cooling/heating operation type air conditioners (R2, WR2 series), the G-type BC controller
cannot be connected to the 16HP outdoor unit model or above, and the G- and GA-type BC controllers cannot
be connected to the 28HP model or above. The GB- and HB-type BC controllers (sub) cannot be connected to
the outdoor unit directly, and be sure to use them with GA- and HA-type BC controllers (main).
♦The insulation for low pressure pipe between the BC controller and outdoor unit shall be at least 20 mm thick. If
the unit is installed on the top floor or in a high-temperature, high-humidity environment, thicker insulation may
be necessary.
♦Do not have any branching points on the downstream of the refrigerant pipe header.
♦When a field-supplied external thermistor is installed or when a device for the demand control is used,
abnormal stop of the unit or damage of the electromagnetic contactor may occur. Consult your local distributor
for details.
♦When indoor units operate a fresh air intake, install a filter in the duct (field-supplied) to remove the dust from
the air.
♦The 4-way or 2-way Airflow Ceiling Cassette Type units that have an outside air inlet can be connected to the
duct, but need a booster fan to be installed at site. Refer to the chapter "Indoor Unit" for the available range for
fresh air intake volume.
♦Operating fresh air intake on the indoor unit may increase the sound pressure level.
Page 163
3. Precautions for Fresh air intake type indoor unit
3-1. Usage
♦This unit mainly handles the outside air load, and is not designed to maintain the room temperature. Install
other air conditioners for handling the air conditioning load in the room.
3-2. Unit characteristics
♦This unit cannot perform the drying operation. The unit will continue the fan operation and blow fresh air (air
that is not air-conditioned) when the Heating Thermo-OFF or Cooling Thermo-OFF mode is selected.
♦The fan may stop tentatively when the unit is connected to the simultaneous cooling/heating operation type
outdoor unit (R2, WR2 series) or during the defrost cycle.
♦This unit switches the Thermo ON or OFF depending on the room temperature. The outside air is directly
supplied into the room during Thermo OFF. Take caution of the cold supply air due to low outside air
temperature and of condensation in the room due to high humidity of the outside air.
♦Outside air temperature ranges for the operation must be as follows:
Cooling: 21ºCD.B./15.5ºCW.B. ~ 43ºCD.B./35ºCW.B.
Heating: -10ºCD.B.~ 20ºCD.B
The unit is forced to operate Thermo OFF (fan operation) when the outside air temperature is as follows.
Cooling: 21ºCD.B or below; Heating: 20ºCD.B or above
♦Either a remote controller (sold separately) or a remote sensor (sold separately) must be installed to monitor
the room temperature.
♦If only this unit is used as an indoor unit, condensation may form at the supply air grill while the unit is operated
in the cooling mode. This unit cannot operate dehumidifying.
♦Use the unit in the way that the airflow rate will not exceed the 110% of the rated airflow.
4. Precautions for Outdoor unit/Heat source unit
4-1. Installation environment
♦Outdoor unit with salt-resistant specification is recommended to use in a place where it is subject to salt air.
♦Even when the unit with salt-resistant specification is used, it is not completely protected against corrosion.
Be sure to follow the directions or precautions described in Instructions Book and Installation Manual for
installation and maintenance. The salt-resistant specification is referred to the guidelines published by JRAIA
(JRA9002).
♦Install the unit in a place where the flow of discharge air is not obstructed. If not, the short-cycling of discharge
air may occur.
♦Provide proper drainage around the unit base, because the condensation may collect and drip from the outdoor
units.
Provide water-proof protection to the floor when installing the units on the rooftop.
♦In a region where snowfall is expected, install the unit so that the outlet faces away from the direction of the
wind, and install a snow guard to protect the unit from snow. Install the unit on a base approximately 50 cm
higher than the expected snowfall. Close the openings for pipes and wiring, because the ingress of water and
small animals may cause equipment damage. If SUS snow guard is used, refer to the Installation Manual that
comes with the snow guard and take caution for the installation to avoid the risk of corrosion.
♦When the unit is expected to operate continuously for a long period of time at outside air temperatures of below
0ºC, take appropriate measures, such as the use of a unit base heater, to prevent icing on the unit base. (Not
applicable to the PUMY series)
♦Install the snow guard so that the outlet/inlet faces away from the direction of the wind.
♦When the snow accumulates approximately 50 cm or more on the snow guard, remove the snow from the
guard. Install a roof that is strong enough to withstand snow loads in a place where snow accumulates.
♦Provide proper protection around the outdoor units in places such as schools to avoid the risk of injury.
♦A cooling tower and heat source water circuit should be a closed circuit that water is not exposed to the
atmosphere.
When a tank is installed to ensure that the circuit has enough water, minimize the contact with outside air so
that the oxygen from being dissolved in the water should be 1 mg/L or less.
♦Install a strainer (50 mesh or more recommended) on the water pipe inlet on the heat source unit.
♦Interlock the heat source unit and water circuit pump.
♦Note the followings to prevent the freeze bursting of pipe when the heat source unit is installed in a place
where the ambient temperature can be 0ºC or below.
♦Keep the water circulating to prevent it from freezing when the ambient temperature is 0ºC or below.
♦Before a long period of non use, be sure to purge the water out of the unit.
4-2. Circulating water
♦Follow the guidelines published by JRAIA (JRA-GL02-1994) to check the water quality of the water in the heat
source unit regularly.
♦A cooling tower and heat source water circuit should be a closed circuit that water is not exposed to the
atmosphere.
When a tank is installed to ensure that the circuit has enough water, minimize the contact with outside air so
that the oxygen from being dissolved in the water should be 1 mg/L or less.
4-3. Unit characteristics
♦When the Thermo ON and OFF is frequently repeated on the indoor unit, the operation status of outdoor units
may become unstable.
4-4. Relevant equipment
♦Provide grounding in accordance with the local regulations.
Page 164
Page 165
5. Precautions for Control-related items
5-1. Product specification
♦To introduce the MELANS system, a consultation with us is required in advance. Especially to introduce the
electricity charge apportioning function or energy-save function, further detailed consultation is required.
Consult your local distributor for details.
♦Billing calculation for AG-150A, GB-50ADA, TG-2000A, or the billing calculation unit is unique and based on
our original method. (Backup operation is included.) It is not based on the metering method, and do not use it
for official business purposes. It is not the method that the amount of electric power consumption (input) by air
conditioner is calculated. Note that the electric power consumption by air conditioner is apportioned by using
the ratio corresponding to the operation status (output) for each air conditioner (indoor unit) in this method.
♦In the apportioned billing function for AG-150A and GB-50ADA, use separate watthour meters for A-control
units, K-control units, and packaged air conditioner for City Multi air conditioners. It is recommended to use an
individual watthour meter for the large-capacity indoor unit (with two or more addresses).
♦When using the peak cut function on the AG-150A or GB-50ADA, note that the control is performed once every
minute and it takes time to obtain the effect of the control. Take appropriate measures such as lowering the
criterion value. Power consumption may exceed the limits if AG-150A or GB-50ADA malfunctions or stops.
Provide a back-up remedy as necessary.
♦The controllers cannot operate while the indoor unit is OFF. (No error)
Turn ON the power to the indoor unit when operating the controllers.
♦When using the interlocked control function on the AG-150A, GB-50ADA, PAC-YG66DCA, or PAC-YG63MCA,
do not use it for the control for the fire prevention or security. (This function should never be used in the way
that would put people's lives at risk.) Provide any methods or circuit that allow ON/OFF operation using an
external switch in case of failure.
5-2. Installation environment
♦The surge protection for the transmission line may be required in areas where lightning strikes frequently occur.
♦A receiver for a wireless remote controller may not work properly due to the effect of general lighting. Leave a
space of at least 1 m between the general lighting and receiver.
♦When the Auto-elevating panel is used and the operation is made by using a wired remote controller, install the
wired remote controller to the place where all air conditioners controlled (at least the bottom part of them) can
be seen from the wired remote controller. If not, the descending panel may cause damage or injury, and be
sure to use a wireless remote controller designed for use with elevating panel (sold separately).
♦Install the wired remote controller (switch box) to the place where the following conditions are met.
♦Where installation surface is flat
♦Where the remote controller can detect an accurate room temperature
The temperature sensors that detect a room temperature are installed both on the remote controller and
indoor unit. When a room temperature is detected using the sensor on the remote controller, the main
remote controller is used to detect a room temperature. In this case, follow the instructions below.
♦Install the controller in a place where it is not subject to the heat source.
(If the remote controller faces direct sunlight or supply air flow direction, the remote controller
cannot detect an accurate room temperature.)
♦ Install the controller in a place where an average room temperature can be detected.
♦ Install the controller in a place where no other wires are present around the temperature sensor.
(If other wires are present, the remote controller cannot detect an accurate room temperature.)
♦To prevent unauthorized access, always use a security device such as a VPN router when connecting
AG-150A, GB-50ADA, or TG-2000A to the Internet.
Page 166
Maintenance equipment
Maintenance cycle [Note that maintenance cycle does not mean guarantee period.]
The following tables are applicable when using equipment under the conditions below.
Normal use without frequent START/STOPs (The number of START/STOPs is assumed to be less than 6 times
per hour in normal use.)
Operating hours are assumed to be 10 hours per day/2500 hours per year.
If the following conditions are met, the equipment may not be used, or the "maintenance cycle" and "replacement
intervals" may be shortened.
When equipment is used in an environment where the temperature and humidity are high or change dramatically
When equipment is used in an environment where the power supply fluctuations (the distortion of voltage,
frequency, and waveform) are large (Only within the allowable range)
When equipment is used in an environment where the unit may receive vibration or mechanical shock
When equipment is used in an environment where dust, salt, toxic gases such as sulfur dioxide and hydrogen
sulfide, and oil mist are present
When equipment starts/stops frequently and operates for a long time (24-hour air conditioning operation)
Table 1. Maintenance cycle
Major components
Compressor
Motor
(Fan, Louver, drain pump)
Bearing
Checking cycle
Maintenance cycle
Major components
20,000 hours
Expansion valve
Valve
(solenoid valve, four-way valve)
Sensor
(thermistor, presser sensor)
Drain pan
20,000 hours
1 year
Electric board
Heat exchanger
15,000 hours
25,000 hours
5 years
Checking cycle
Maintenance cycle
20,000 hours
1 year
20,000 hours
5 years
8 years
Note1 This table shows major components. Refer to the maintenance contract for details.
Note2 This maintenance cycle shows a period in which products are expected to require no maintenance. Use this cycle for planning maintenance (budgeting the
maintenance expense etc.) Checking/ Maintenance cycle may be shorter than the one on this table depending on the contents of maintenance check
contract.
Sudden unpredictable accident may occur even if check-up is performed.
Replacement cycle of consumable components
[Note that replacement cycle does not mean guarantee period.]
Table 2. Replacement cycle
Major components
Long-life filter
High-performance filter
Fan belt
Smoothing capacitor
Fuse
Crank case heater
Checking cycle
Replacement cycle
1 year
5 years
1 year
5,000 hours
10 years
10 years
8 years
Note1 This table shows major components. Refer to the maintenance contract for
details.
Note2 This replacement cycle shows a period in which products are expected to
require no replacements. Use this cycle for planning maintenance
(budgeting expenses for replacing equipments etc.)
Page 167
MITSUBISHI ELECTRIC MULTIPLE SPLIT TYPE AIR CONDITIONERS
Series
CITY MULTI
Eco Changes is the Mitsubishi Electric Group’s environmental statement,
and expresses the Group’s stance on environmental management.
Through a wide range of businesses, we are helping contribute to the
realization of a sustainable society.
The Air Conditioning & Refrigeration Systems Works acquired ISO 9001 certification under Series
9000 of the International Standard Organization (ISO) based on a review of Quality management for
the production of refrigeration and air conditioning equipment.
ISO Authorization System
The ISO 9000 series is a plant authorization system relating to quality management as stipulated by
the ISO. ISO 9001 certifies quality management based on the "design, development, production,
installation and auxiliary services" for products built at an authorized plant.
FM33568 / ISO 9001;2008
The Air Conditioning & Refrigeration Systems Works acquired environmental management system
standard ISO 14001 certification.
The ISO 14000 series is a set of standards applying to environmental protection set by the
International Standard Organization (ISO).
Registered on March 10, 1998.
Warning
■ Do not use refrigerant other than the type indicated in the manuals provided with the unit and on the nameplate.
- Doing so may cause the unit or pipes to burst, or result in explosion or fire during use, during repair, or at the time of disposal of the
unit.
- It may also be in violation of applicable laws.
- MITSUBISHI ELECTRIC CORPORATION cannot be held responsible for malfunctions or accidents resulting from the use of the wrong
type of refrigerant.
CM13AS-L
MEE13K031
New publication effective Feb. 2014
Specifications subject to change without notice